All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Zhu <jamesz@amd.com>
To: Felix Kuehling <felix.kuehling@amd.com>,
	James Zhu <James.Zhu@amd.com>,
	amd-gfx@lists.freedesktop.org
Cc: kolAflash@kolahilft.de, me@jeromec.com, alexdeucher@gmail.com,
	ted437@gmail.com, Huang Rui <ray.huang@amd.com>
Subject: Re: [PATCH 3/3] drm/amdgpu: move iommu_resume before ip init/resume
Date: Thu, 9 Sep 2021 12:19:48 -0400	[thread overview]
Message-ID: <75d218ac-467f-f608-3f60-c05946acb32c@amd.com> (raw)
In-Reply-To: <8d26e2ce-5161-60fa-9c0e-3a87431f57e7@amd.com>


On 2021-09-07 6:20 p.m., Felix Kuehling wrote:
> Am 2021-09-07 um 4:30 p.m. schrieb James Zhu:
>>
>> On 2021-09-07 1:53 p.m., Felix Kuehling wrote:
>>> Am 2021-09-07 um 1:51 p.m. schrieb Felix Kuehling:
>>>> Am 2021-09-07 um 1:22 p.m. schrieb James Zhu:
>>>>> On 2021-09-07 12:48 p.m., Felix Kuehling wrote:
>>>>>> Am 2021-09-07 um 12:07 p.m. schrieb James Zhu:
>>>>>>> Separate iommu_resume from kfd_resume, and move it before
>>>>>>> other amdgpu ip init/resume.
>>>>>>>
>>>>>>> Fixed Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211277
>>>>>> I think the change is OK. But I don't understand how the IOMMUv2
>>>>>> initialization sequence could affect a crash in DM. The display should
>>>>>> not depend on IOMMUv2 at all. What am I missing?
>>>>> [JZ] It is a weird issue. disable VCN IP block or disable gpu_off
>>>>> feature, or set pci=noats, all
>>>>>
>>>>> can fix DM crash. Also the issue occurred quite random, some time
>>>>> after few suspend/resume cycle,
>>>>>
>>>>> some times after few hundreds S/R cycles. the maximum that I saw is
>>>>> 2422 S/R cycles.
>>>>>
>>>>> But every time DM crash, I can see one or two iommu errors ahead:
>>>>>
>>>>> *AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=****
>>>>> flags=0x0070]*
>>>> This error is not from IOMMUv2 doing GVA to GPA translations. It's from
>>>> IOMMUv1 doing GPA to SPA translation. This error points to an invalid
>>>> physical (GVA) address being used by the GPU to access random system
>>>>
>>>> Oops: s/GVA/GPA
>>>> memory it shouldn't be accessing (because there is no valid DMA mapping).
>>>>
>>>> On AMD systems, IOMMUv1 tends to be in pass-through mode when IOMMUv2 is
>>>> enabled. It's possible that the earlier initialization of IOMMUv2 hides
>>>> the problem by putting the IOMMU into passthrough mode. I don't think
>>>> this patch series is a valid solution.
>> [JZ] Good to know, thanks! So amd_iommu_init_device is for v2 only.
>>
>> And it is supposed to be safe to do amd_iommu_init_device after amdgpu
>> IP init/resume without any interference.
>>
> Yes, it's supposed to. But with your results below, this is getting very
> confusing. It's as if the IOMMUv2 initialization has some unintended
> side effects if it happens at the wrong moment during resume. If you
> want to debug this further, you'll probably need to work with the server
> team that's working on the IOMMU driver. I'm not sure it's worth the
> trouble.

[JZ] Can you point to me who is the right person from service team? I 
wish they

can give a review on the patches and issues? Thanks!

Also I got advice from Ray, and used ignore_crat=1 during modprobe to 
get iommu v2 fallthrough,

and it  also fixed the issue.

> The series is
>
> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
>
>
>>>> You can probably fix the problem with this kernel boot parameter: iommu=pt
>> [JZ] Still not working after apply *iommu=pt*
>>
>> BOOT_IMAGE=/boot/vmlinuz-5.8.0-41-generic
>> root=UUID=030a18fe-22f0-49be-818f-192093d543b5 quiet splash
>> modprobe.blacklist=amdgpu *iommu=pt* 3
>> [    0.612117] iommu: Default domain type: *Passthrough* (set via
>> kernel command line)
>> [  354.067871] amdgpu 0000:04:00.0: AMD-Vi: Event logged
>> [*IO_PAGE_FAULT* domain=0x0000 address=0x32de00040 flags=0x0070]
>> [  354.067884] amdgpu 0000:04:00.0: AMD-Vi: Event logged
>> [IO_PAGE_FAULT domain=0x0000 address=0x32de40000 flags=0x0070]
>>
>>>> And you can probably reproduce it even with this patch series if instead
>>>> you add: iommu=nopt amd_iommu=force_isolation
>> [JZ] could not set both *iommu=nopt *and*  amd*_*iommu=force_isolation
>> *together*. *(does it mean something?)*
>> *
>>
>> BOOT_IMAGE=/boot/vmlinuz-5.13.0-custom+
>> root=UUID=030a18fe-22f0-49be-818f-192093d543b5 quiet splash
>> modprobe.blacklist=amdgpu*iommu=nopt amd_iommu=force_isolation* 3
>> [    0.294242] iommu: Default domain type: Translated (set via kernel
>> command line)
>> [    0.350675] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4
>> counters/bank).
>> [  106.403927] amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_resume
>> failed (-6).
>> [  106.403931] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -6
>> [  106.403941] amdgpu 0000:04:00.0: PM: failed to resume async: error -6
>>
> This is weird. Is this happening during resume or driver init?
[JZ] this happened during init, not resume.
>
>
>> *iommu=nopt**: *Passed at least 200 S/R cycles
>>
>> BOOT_IMAGE=/boot/vmlinuz-5.13.0-custom+
>> root=UUID=030a18fe-22f0-49be-818f-192093d543b5 quiet splash
>> modprobe.blacklist=amdgpu   *iommu=nopt* 3
>> [    0.294242] iommu: Default domain type: Translated (set via kernel
>> command line)
>>
> Interesting. That's the opposite of what I would have expected.
>
>
>> *amd_iommu=force_isolation*: failed at 1st resume
>>
>> BOOT_IMAGE=/boot/vmlinuz-5.13.0-custom+
>> root=UUID=030a18fe-22f0-49be-818f-192093d543b5 quiet splash
>> modprobe.blacklist=amdgpu *amd_iommu=force_isolation*   3
>> [    0.294242] iommu: Default domain type: Translated
>>
>> [   49.513262] PM: suspend entry (deep)
>> [   49.514404] Filesystems sync: 0.001 seconds
>> [   49.514668] Freezing user space processes ...
>> [   69.523111] Freezing of tasks failed after 20.008 seconds (2 tasks
>> refusing to freeze, wq_busy=0):
>> [   69.523163] task:gnome-shell     state:D stack:    0 pid: 2196
>> ppid:  2108 flags:0x00000004
>>
> I've never seen this before.
>
> I think if you want to debug this further, you'll need to work with the
> IOMMU driver team.
>
> Regards,
>    Felix
>
>
>> [   69.523172] Call Trace:
>> [   69.523182]  __schedule+0x2ee/0x900
>> [   69.523193]  ? __mod_memcg_lruvec_state+0x22/0xe0
>> [   69.523204]  schedule+0x4f/0xc0
>> [   69.523214]  drm_sched_entity_flush+0x17c/0x230 [gpu_sched]
>> [   69.523225]  ? wait_woken+0x80/0x80
>> [   69.523233]  amdgpu_ctx_mgr_entity_flush+0x97/0xf0 [amdgpu]
>> [   69.523517]  amdgpu_flush+0x2b/0x50 [amdgpu]
>> [   69.523773]  filp_close+0x37/0x70
>> [   69.523780]  do_close_on_exec+0xda/0x110
>> [   69.523787]  begin_new_exec+0x59d/0xa40
>> [   69.523793]  load_elf_binary+0x144/0x1720
>> [   69.523801]  ? __kernel_read+0x1a0/0x2d0
>> [   69.523807]  ? __kernel_read+0x1a0/0x2d0
>> [   69.523812]  ? aa_get_task_label+0x49/0xd0
>> [   69.523820]  bprm_execve+0x288/0x680
>> [   69.523826]  do_execveat_common.isra.0+0x189/0x1c0
>> [   69.523831]  __x64_sys_execve+0x37/0x50
>> [   69.523836]  do_syscall_64+0x40/0xb0
>> [   69.523843]  entry_SYSCALL_64_after_hwframe+0x44/0xae
>> [   69.523851] RIP: 0033:0x7ff1244132fb
>> [   69.523856] RSP: 002b:00007fff91a9f2b8 EFLAGS: 00000206 ORIG_RAX:
>> 000000000000003b
>> [   69.523862] RAX: ffffffffffffffda RBX: 00007ff11ee2e180 RCX:
>> 00007ff1244132fb
>> [   69.523866] RDX: 0000561199f5bc00 RSI: 000056119a1b0890 RDI:
>> 0000561199f2021a
>> [   69.523868] RBP: 000000000000001a R08: 00007fff91aa2a58 R09:
>> 000000179a034e00
>> [   69.523871] R10: 000056119a1b0890 R11: 0000000000000206 R12:
>> 00007fff91aa2a60
>> [   69.523874] R13: 000056119a1b0890 R14: 0000561199f2021a R15:
>> 0000000000000001
>> [   69.523882] task:gst-plugin-scan state:D stack:    0 pid: 2213
>> ppid:  2199 flags:0x00004004
>> [   69.523888] Call Trace:
>> [   69.523891]  __schedule+0x2ee/0x900
>> [   69.523897]  schedule+0x4f/0xc0
>> [   69.523902]  drm_sched_entity_flush+0x17c/0x230 [gpu_sched]
>> [   69.523912]  ? wait_woken+0x80/0x80
>> [   69.523918]  drm_sched_entity_destroy+0x18/0x30 [gpu_sched]
>> [   69.523928]  amdgpu_vm_fini+0x256/0x3d0 [amdgpu]
>> [   69.524210]  amdgpu_driver_postclose_kms+0x179/0x240 [amdgpu]
>> [   69.524444]  drm_file_free.part.0+0x1e5/0x250 [drm]
>> [   69.524481]  ? dma_fence_release+0x140/0x140
>> [   69.524489]  drm_close_helper.isra.0+0x65/0x70 [drm]
>> [   69.524524]  drm_release+0x6e/0xf0 [drm]
>> [   69.524559]  __fput+0x9f/0x250
>> [   69.524564]  ____fput+0xe/0x10
>> [   69.524569]  task_work_run+0x70/0xb0
>> [   69.524575]  exit_to_user_mode_prepare+0x1c8/0x1d0
>> [   69.524581]  syscall_exit_to_user_mode+0x27/0x50
>> [   69.524586]  ? __x64_sys_close+0x12/0x40
>> [   69.524589]  do_syscall_64+0x4d/0xb0
>> [   69.524594]  entry_SYSCALL_64_after_hwframe+0x44/0xae
>> [   69.524599] RIP: 0033:0x7f2c12adb9ab
>> [   69.524602] RSP: 002b:00007fff981aaaa0 EFLAGS: 00000293 ORIG_RAX:
>> 0000000000000003
>> [   69.524606] RAX: 0000000000000000 RBX: 0000556b6f83f060 RCX:
>> 00007f2c12adb9ab
>> [   69.524608] RDX: 0000000000000014 RSI: 0000556b6f841400 RDI:
>> 0000000000000006
>> [   69.524611] RBP: 0000556b6f83f100 R08: 0000000000000000 R09:
>> 000000000000000e
>> [   69.524613] R10: 00007fff981db090 R11: 0000000000000293 R12:
>> 0000556b6f841400
>> [   69.524616] R13: 00007f2c12763e30 R14: 0000556b6f817330 R15:
>> 00007f2c127420b4
>>
>>>> Regards,
>>>>    Felix
>>>>
>>>>
>>>>> Since we can't stop HW/FW/SW right the way after IO page fault
>>>>> detected, so I can't tell which part try to access
>>>>> system memory through IOMMU.
>>>>>
>>>>> But after moving IOMMU device init before other amdgpu IP init/resume,
>>>>> the DM crash /IOMMU page fault issues are gone.
>>>>>
>>>>> Those patches can't directly explain why the issue fixed, but this new
>>>>> sequence makes more sense to me.
>>>>>
>>>>> Can I have you RB on those patches?
>>>>>
>>>>> Thanks!
>>>>> James
>>>>>
>>>>>> Regards,
>>>>>>    Felix
>>>>>>
>>>>>>
>>>>>>> Signed-off-by: James Zhu <James.Zhu@amd.com>
>>>>>>> ---
>>>>>>>   drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 ++++++++++++
>>>>>>>   1 file changed, 12 insertions(+)
>>>>>>>
>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>>>>>> index 653bd8f..e3f0308 100644
>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>>>>>> @@ -2393,6 +2393,10 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev)
>>>>>>>   	if (r)
>>>>>>>   		goto init_failed;
>>>>>>>   
>>>>>>> +	r = amdgpu_amdkfd_resume_iommu(adev);
>>>>>>> +	if (r)
>>>>>>> +		goto init_failed;
>>>>>>> +
>>>>>>>   	r = amdgpu_device_ip_hw_init_phase1(adev);
>>>>>>>   	if (r)
>>>>>>>   		goto init_failed;
>>>>>>> @@ -3147,6 +3151,10 @@ static int amdgpu_device_ip_resume(struct amdgpu_device *adev)
>>>>>>>   {
>>>>>>>   	int r;
>>>>>>>   
>>>>>>> +	r = amdgpu_amdkfd_resume_iommu(adev);
>>>>>>> +	if (r)
>>>>>>> +		return r;
>>>>>>> +
>>>>>>>   	r = amdgpu_device_ip_resume_phase1(adev);
>>>>>>>   	if (r)
>>>>>>>   		return r;
>>>>>>> @@ -4602,6 +4610,10 @@ int amdgpu_do_asic_reset(struct list_head *device_list_handle,
>>>>>>>   				dev_warn(tmp_adev->dev, "asic atom init failed!");
>>>>>>>   			} else {
>>>>>>>   				dev_info(tmp_adev->dev, "GPU reset succeeded, trying to resume\n");
>>>>>>> +				r = amdgpu_amdkfd_resume_iommu(tmp_adev);
>>>>>>> +				if (r)
>>>>>>> +					goto out;
>>>>>>> +
>>>>>>>   				r = amdgpu_device_ip_resume_phase1(tmp_adev);
>>>>>>>   				if (r)
>>>>>>>   					goto out;

      reply	other threads:[~2021-09-09 16:19 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-07 16:07 [PATCH 1/3] drm/amdkfd: separate kfd_iommu_resume from kfd_resume James Zhu
2021-09-07 16:07 ` [PATCH 2/3] drm/amdgpu: add amdgpu_amdkfd_resume_iommu James Zhu
2021-09-07 16:07 ` [PATCH 3/3] drm/amdgpu: move iommu_resume before ip init/resume James Zhu
2021-09-07 16:48   ` Felix Kuehling
2021-09-07 17:22     ` James Zhu
2021-09-07 17:51       ` Felix Kuehling
2021-09-07 17:53         ` Felix Kuehling
2021-09-07 20:30           ` James Zhu
2021-09-07 22:20             ` Felix Kuehling
2021-09-09 16:19               ` James Zhu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=75d218ac-467f-f608-3f60-c05946acb32c@amd.com \
    --to=jamesz@amd.com \
    --cc=James.Zhu@amd.com \
    --cc=alexdeucher@gmail.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=felix.kuehling@amd.com \
    --cc=kolAflash@kolahilft.de \
    --cc=me@jeromec.com \
    --cc=ray.huang@amd.com \
    --cc=ted437@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.