All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Giuseppe CAVALLARO <peppe.cavallaro@st.com>,
	Niklas Cassel <niklas.cassel@axis.com>, <Joao.Pinto@synopsys.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Niklas Cassel <niklass@axis.com>
Subject: Re: [PATCH net-next] net: stmmac: set total length of the packet to be transmitted in TDES3
Date: Tue, 11 Apr 2017 09:20:33 +0200	[thread overview]
Message-ID: <76b6b77b-890e-77e8-5e82-f691982ebc34@st.com> (raw)
In-Reply-To: <a50439b5-0e39-7d67-6034-9cf25ff947a2@st.com>

Hi,

On 04/11/2017 07:40 AM, Giuseppe CAVALLARO wrote:
> Hi Niklas
>
> patch looks ok for me, Alex any feedback?

It sounds good for me to.
>
> peppe
>
> On 4/10/2017 8:33 PM, Niklas Cassel wrote:
>> From: Niklas Cassel <niklas.cassel@axis.com>
>>
>> Field FL/TPL in register TDES3 is not correctly set on GMAC4.
>> TX appears to be functional on GMAC 4.10a even if this field is not set,
>> however, to avoid relying on undefined behavior, set the length in TDES3.
>>
>> The field has a different meaning depending on if the TSE bit in TDES3
>> is set or not (TSO). However, regardless of the TSE bit, the field is
>> not optional. The field is already set correctly when the TSE bit is set.
>>
>> Since there is no limit for the number of descriptors that can be
>> used for a single packet, the field should be set to the sum of
>> the buffers contained in:
>> [<desc with First Descriptor bit set> ... <desc n> ...
>> <desc with Last Descriptor bit set>], which should be equal to skb->len.
>>
>> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
>> ---
>>   drivers/net/ethernet/stmicro/stmmac/chain_mode.c   | 6 +++---
>>   drivers/net/ethernet/stmicro/stmmac/common.h       | 2 +-
>>   drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 3 ++-
>>   drivers/net/ethernet/stmicro/stmmac/enh_desc.c     | 2 +-
>>   drivers/net/ethernet/stmicro/stmmac/norm_desc.c    | 2 +-
>>   drivers/net/ethernet/stmicro/stmmac/ring_mode.c    | 9 ++++++---
>>   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 5 +++--
>>   7 files changed, 17 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
>> b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
>> index 37881f81319e..e93c40b4631e 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
>> @@ -52,7 +52,7 @@ static int stmmac_jumbo_frm(void *p, struct sk_buff
>> *skb, int csum)
>>       tx_q->tx_skbuff_dma[entry].len = bmax;
>>       /* do not close the descriptor and do not set own bit */
>>       priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum,
>> STMMAC_CHAIN_MODE,
>> -                    0, false);
>> +                    0, false, skb->len);
>>         while (len != 0) {
>>           tx_q->tx_skbuff[entry] = NULL;
>> @@ -70,7 +70,7 @@ static int stmmac_jumbo_frm(void *p, struct sk_buff
>> *skb, int csum)
>>               tx_q->tx_skbuff_dma[entry].len = bmax;
>>               priv->hw->desc->prepare_tx_desc(desc, 0, bmax, csum,
>>                               STMMAC_CHAIN_MODE, 1,
>> -                            false);
>> +                            false, skb->len);
>>               len -= bmax;
>>               i++;
>>           } else {
>> @@ -85,7 +85,7 @@ static int stmmac_jumbo_frm(void *p, struct sk_buff
>> *skb, int csum)
>>               /* last descriptor can be set now */
>>               priv->hw->desc->prepare_tx_desc(desc, 0, len, csum,
>>                               STMMAC_CHAIN_MODE, 1,
>> -                            true);
>> +                            true, skb->len);
>>               len = 0;
>>           }
>>       }
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h
>> b/drivers/net/ethernet/stmicro/stmmac/common.h
>> index 90d28bcad880..b7ce3fbb5375 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
>> @@ -373,7 +373,7 @@ struct stmmac_desc_ops {
>>       /* Invoked by the xmit function to prepare the tx descriptor */
>>       void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len,
>>                    bool csum_flag, int mode, bool tx_own,
>> -                 bool ls);
>> +                 bool ls, unsigned int tot_pkt_len);
>>       void (*prepare_tso_tx_desc)(struct dma_desc *p, int is_fs, int
>> len1,
>>                       int len2, bool tx_own, bool ls,
>>                       unsigned int tcphdrlen,
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
>> b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
>> index 843ec69222ea..aa6476439aee 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
>> @@ -304,12 +304,13 @@ static void dwmac4_rd_init_tx_desc(struct
>> dma_desc *p, int mode, int end)
>>     static void dwmac4_rd_prepare_tx_desc(struct dma_desc *p, int
>> is_fs, int len,
>>                         bool csum_flag, int mode, bool tx_own,
>> -                      bool ls)
>> +                      bool ls, unsigned int tot_pkt_len)
>>   {
>>       unsigned int tdes3 = le32_to_cpu(p->des3);
>>         p->des2 |= cpu_to_le32(len & TDES2_BUFFER1_SIZE_MASK);
>>   +    tdes3 |= tot_pkt_len & TDES3_PACKET_SIZE_MASK;
>>       if (is_fs)
>>           tdes3 |= TDES3_FIRST_DESCRIPTOR;
>>       else
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
>> b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
>> index 323b59ec74a3..7546b3664113 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
>> @@ -315,7 +315,7 @@ static void enh_desc_release_tx_desc(struct
>> dma_desc *p, int mode)
>>     static void enh_desc_prepare_tx_desc(struct dma_desc *p, int
>> is_fs, int len,
>>                        bool csum_flag, int mode, bool tx_own,
>> -                     bool ls)
>> +                     bool ls, unsigned int tot_pkt_len)
>>   {
>>       unsigned int tdes0 = le32_to_cpu(p->des0);
>>   diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
>> b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
>> index efb818ebd55e..f817f8f36569 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
>> @@ -191,7 +191,7 @@ static void ndesc_release_tx_desc(struct dma_desc
>> *p, int mode)
>>     static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs,
>> int len,
>>                     bool csum_flag, int mode, bool tx_own,
>> -                  bool ls)
>> +                  bool ls, unsigned int tot_pkt_len)
>>   {
>>       unsigned int tdes1 = le32_to_cpu(p->des1);
>>   diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
>> b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
>> index 31213e64513d..28e4b5d50ce6 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
>> @@ -59,7 +59,8 @@ static int stmmac_jumbo_frm(void *p, struct sk_buff
>> *skb, int csum)
>>             desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
>>           priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum,
>> -                        STMMAC_RING_MODE, 0, false);
>> +                        STMMAC_RING_MODE, 0,
>> +                        false, skb->len);
>>           tx_q->tx_skbuff[entry] = NULL;
>>           entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
>>   @@ -79,7 +80,8 @@ static int stmmac_jumbo_frm(void *p, struct
>> sk_buff *skb, int csum)
>>             desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
>>           priv->hw->desc->prepare_tx_desc(desc, 0, len, csum,
>> -                        STMMAC_RING_MODE, 1, true);
>> +                        STMMAC_RING_MODE, 1,
>> +                        true, skb->len);
>>       } else {
>>           des2 = dma_map_single(priv->device, skb->data,
>>                         nopaged_len, DMA_TO_DEVICE);
>> @@ -91,7 +93,8 @@ static int stmmac_jumbo_frm(void *p, struct sk_buff
>> *skb, int csum)
>>           tx_q->tx_skbuff_dma[entry].is_jumbo = true;
>>           desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
>>           priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len, csum,
>> -                        STMMAC_RING_MODE, 0, true);
>> +                        STMMAC_RING_MODE, 0,
>> +                        true, skb->len);
>>       }
>>         tx_q->cur_tx = entry;
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index a89f76b27ea2..5c1ebc70bebd 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -3033,7 +3033,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff
>> *skb, struct net_device *dev)
>>             /* Prepare the descriptor and set the own bit too */
>>           priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion,
>> -                        priv->mode, 1, last_segment);
>> +                        priv->mode, 1, last_segment,
>> +                        skb->len);
>>       }
>>         entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
>> @@ -3116,7 +3117,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff
>> *skb, struct net_device *dev)
>>           /* Prepare the first descriptor setting the OWN bit too */
>>           priv->hw->desc->prepare_tx_desc(first, 1, nopaged_len,
>>                           csum_insertion, priv->mode, 1,
>> -                        last_segment);
>> +                        last_segment, skb->len);
>>             /* The own bit must be the latest setting done when
>> prepare the
>>            * descriptor and then barrier is needed to make sure that
>
>

  reply	other threads:[~2017-04-11  7:20 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-10 18:33 [PATCH net-next] net: stmmac: set total length of the packet to be transmitted in TDES3 Niklas Cassel
2017-04-11  5:40 ` Giuseppe CAVALLARO
2017-04-11  7:20   ` Alexandre Torgue [this message]
2017-04-11  8:48 ` Joao Pinto
2017-04-11  9:10   ` Niklas Cassel
2017-04-11 12:41 ` Giuseppe CAVALLARO
2017-04-13 16:40 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=76b6b77b-890e-77e8-5e82-f691982ebc34@st.com \
    --to=alexandre.torgue@st.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.cassel@axis.com \
    --cc=niklass@axis.com \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.