[PATCH v1 0/2] drm/panel: otm8009a: Add support for the optional power-supply

[PATCH v1 0/2] drm/panel: otm8009a: Add support for the optional power-supply

[Philippe Cornu]

Some boards use a dedicated voltage regulator for this panel.
Add & Document this related optional power-supply property and
add its support in the driver.

Philippe Cornu (2):
  dt-bindings/display/panel: otm8009a: Add optional power-supply
    property
  drm/panel: otm8009a: Add support for the optional power-supply

 .../bindings/display/panel/orisetech,otm8009a.txt       |  2 ++
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c        | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)

-- 
2.15.1

[PATCH v1 0/2] drm/panel: otm8009a: Add support for the optional power-supply

[Philippe Cornu]

Some boards use a dedicated voltage regulator for this panel.
Add & Document this related optional power-supply property and
add its support in the driver.

Philippe Cornu (2):
  dt-bindings/display/panel: otm8009a: Add optional power-supply
    property
  drm/panel: otm8009a: Add support for the optional power-supply

 .../bindings/display/panel/orisetech,otm8009a.txt       |  2 ++
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c        | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)

-- 
2.15.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v1 1/2] dt-bindings/display/panel: otm8009a: Add optional power-supply property

[Philippe Cornu]

Some boards use a dedicated voltage regulator for this panel.
Add & document this related optional power-supply property.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
index 6862028e7b2e..203b03eefb68 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -9,6 +9,7 @@ Required properties:
 
 Optional properties:
   - reset-gpios: a GPIO spec for the reset pin (active low).
+  - power-supply: phandle of the regulator that provides the supply voltage.
 
 Example:
 &dsi {
@@ -17,5 +18,6 @@ Example:
 		compatible = "orisetech,otm8009a";
 		reg = <0>;
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&v1v8>;
 	};
 };
-- 
2.15.1

[PATCH v1 1/2] dt-bindings/display/panel: otm8009a: Add optional power-supply property

[Philippe Cornu]

Some boards use a dedicated voltage regulator for this panel.
Add & document this related optional power-supply property.

Signed-off-by: Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>
---
 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
index 6862028e7b2e..203b03eefb68 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -9,6 +9,7 @@ Required properties:
 
 Optional properties:
   - reset-gpios: a GPIO spec for the reset pin (active low).
+  - power-supply: phandle of the regulator that provides the supply voltage.
 
 Example:
 &dsi {
@@ -17,5 +18,6 @@ Example:
 		compatible = "orisetech,otm8009a";
 		reg = <0>;
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&v1v8>;
 	};
 };
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v1 2/2] drm/panel: otm8009a: Add support for the optional power-supply

[Philippe Cornu]

Add support for the optional power-supply.

Note: A "dummy regulator" is returned by devm_regulator_get()
if the optional regulator is not present in the device tree,
simplifying the source code when enabling/disabling the regulator.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 72530983d55d..90f1ae4af93c 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -11,6 +11,7 @@
 #include <drm/drm_panel.h>
 #include <linux/backlight.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 #include <video/mipi_display.h>
 
 #define DRV_NAME "orisetech_otm8009a"
@@ -62,6 +63,7 @@ struct otm8009a {
 	struct drm_panel panel;
 	struct backlight_device *bl_dev;
 	struct gpio_desc *reset_gpio;
+	struct regulator *supply;
 	bool prepared;
 	bool enabled;
 };
@@ -279,6 +281,8 @@ static int otm8009a_unprepare(struct drm_panel *panel)
 		msleep(20);
 	}
 
+	regulator_disable(ctx->supply);
+
 	ctx->prepared = false;
 
 	return 0;
@@ -292,6 +296,12 @@ static int otm8009a_prepare(struct drm_panel *panel)
 	if (ctx->prepared)
 		return 0;
 
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0) {
+		DRM_ERROR("failed to enable supply: %d\n", ret);
+		return ret;
+	}
+
 	if (ctx->reset_gpio) {
 		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
@@ -414,6 +424,13 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
+	ctx->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		dev_err(dev, "failed to request regulator: %d\n", ret);
+		return ret;
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dev = dev;
-- 
2.15.1

[PATCH v1 2/2] drm/panel: otm8009a: Add support for the optional power-supply

[Philippe Cornu]

Add support for the optional power-supply.

Note: A "dummy regulator" is returned by devm_regulator_get()
if the optional regulator is not present in the device tree,
simplifying the source code when enabling/disabling the regulator.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 72530983d55d..90f1ae4af93c 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -11,6 +11,7 @@
 #include <drm/drm_panel.h>
 #include <linux/backlight.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 #include <video/mipi_display.h>
 
 #define DRV_NAME "orisetech_otm8009a"
@@ -62,6 +63,7 @@ struct otm8009a {
 	struct drm_panel panel;
 	struct backlight_device *bl_dev;
 	struct gpio_desc *reset_gpio;
+	struct regulator *supply;
 	bool prepared;
 	bool enabled;
 };
@@ -279,6 +281,8 @@ static int otm8009a_unprepare(struct drm_panel *panel)
 		msleep(20);
 	}
 
+	regulator_disable(ctx->supply);
+
 	ctx->prepared = false;
 
 	return 0;
@@ -292,6 +296,12 @@ static int otm8009a_prepare(struct drm_panel *panel)
 	if (ctx->prepared)
 		return 0;
 
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0) {
+		DRM_ERROR("failed to enable supply: %d\n", ret);
+		return ret;
+	}
+
 	if (ctx->reset_gpio) {
 		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
@@ -414,6 +424,13 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
+	ctx->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		dev_err(dev, "failed to request regulator: %d\n", ret);
+		return ret;
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dev = dev;
-- 
2.15.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/2] dt-bindings/display/panel: otm8009a: Add optional power-supply property

[Yannick FERTRE]

Reviewed-by: Yannick Fertré <yannick.fertre@st.com>


On 02/05/2018 10:45 AM, Philippe Cornu wrote:
> Some boards use a dedicated voltage regulator for this panel.
> Add & document this related optional power-supply property.
>
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>   Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> index 6862028e7b2e..203b03eefb68 100644
> --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> @@ -9,6 +9,7 @@ Required properties:
>   
>   Optional properties:
>     - reset-gpios: a GPIO spec for the reset pin (active low).
> +  - power-supply: phandle of the regulator that provides the supply voltage.
>   
>   Example:
>   &dsi {
> @@ -17,5 +18,6 @@ Example:
>   		compatible = "orisetech,otm8009a";
>   		reg = <0>;
>   		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
> +		power-supply = <&v1v8>;
>   	};
>   };

Re: [PATCH v1 1/2] dt-bindings/display/panel: otm8009a: Add optional power-supply property

[Yannick FERTRE]

Reviewed-by: Yannick Fertré <yannick.fertre@st.com>


On 02/05/2018 10:45 AM, Philippe Cornu wrote:
> Some boards use a dedicated voltage regulator for this panel.
> Add & document this related optional power-supply property.
>
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>   Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> index 6862028e7b2e..203b03eefb68 100644
> --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> @@ -9,6 +9,7 @@ Required properties:
>   
>   Optional properties:
>     - reset-gpios: a GPIO spec for the reset pin (active low).
> +  - power-supply: phandle of the regulator that provides the supply voltage.
>   
>   Example:
>   &dsi {
> @@ -17,5 +18,6 @@ Example:
>   		compatible = "orisetech,otm8009a";
>   		reg = <0>;
>   		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
> +		power-supply = <&v1v8>;
>   	};
>   };
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 2/2] drm/panel: otm8009a: Add support for the optional power-supply

[Yannick FERTRE]

Reviewed-by: Yannick Fertré <yannick.fertre@st.com>


On 02/05/2018 10:45 AM, Philippe Cornu wrote:
> Add support for the optional power-supply.
>
> Note: A "dummy regulator" is returned by devm_regulator_get()
> if the optional regulator is not present in the device tree,
> simplifying the source code when enabling/disabling the regulator.
>
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>   drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 72530983d55d..90f1ae4af93c 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -11,6 +11,7 @@
>   #include <drm/drm_panel.h>
>   #include <linux/backlight.h>
>   #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
>   #include <video/mipi_display.h>
>   
>   #define DRV_NAME "orisetech_otm8009a"
> @@ -62,6 +63,7 @@ struct otm8009a {
>   	struct drm_panel panel;
>   	struct backlight_device *bl_dev;
>   	struct gpio_desc *reset_gpio;
> +	struct regulator *supply;
>   	bool prepared;
>   	bool enabled;
>   };
> @@ -279,6 +281,8 @@ static int otm8009a_unprepare(struct drm_panel *panel)
>   		msleep(20);
>   	}
>   
> +	regulator_disable(ctx->supply);
> +
>   	ctx->prepared = false;
>   
>   	return 0;
> @@ -292,6 +296,12 @@ static int otm8009a_prepare(struct drm_panel *panel)
>   	if (ctx->prepared)
>   		return 0;
>   
> +	ret = regulator_enable(ctx->supply);
> +	if (ret < 0) {
> +		DRM_ERROR("failed to enable supply: %d\n", ret);
> +		return ret;
> +	}
> +
>   	if (ctx->reset_gpio) {
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> @@ -414,6 +424,13 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
>   		return PTR_ERR(ctx->reset_gpio);
>   	}
>   
> +	ctx->supply = devm_regulator_get(dev, "power");
> +	if (IS_ERR(ctx->supply)) {
> +		ret = PTR_ERR(ctx->supply);
> +		dev_err(dev, "failed to request regulator: %d\n", ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;

Re: [PATCH v1 2/2] drm/panel: otm8009a: Add support for the optional power-supply

[Yannick FERTRE]

Reviewed-by: Yannick Fertré <yannick.fertre@st.com>


On 02/05/2018 10:45 AM, Philippe Cornu wrote:
> Add support for the optional power-supply.
>
> Note: A "dummy regulator" is returned by devm_regulator_get()
> if the optional regulator is not present in the device tree,
> simplifying the source code when enabling/disabling the regulator.
>
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>   drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 72530983d55d..90f1ae4af93c 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -11,6 +11,7 @@
>   #include <drm/drm_panel.h>
>   #include <linux/backlight.h>
>   #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
>   #include <video/mipi_display.h>
>   
>   #define DRV_NAME "orisetech_otm8009a"
> @@ -62,6 +63,7 @@ struct otm8009a {
>   	struct drm_panel panel;
>   	struct backlight_device *bl_dev;
>   	struct gpio_desc *reset_gpio;
> +	struct regulator *supply;
>   	bool prepared;
>   	bool enabled;
>   };
> @@ -279,6 +281,8 @@ static int otm8009a_unprepare(struct drm_panel *panel)
>   		msleep(20);
>   	}
>   
> +	regulator_disable(ctx->supply);
> +
>   	ctx->prepared = false;
>   
>   	return 0;
> @@ -292,6 +296,12 @@ static int otm8009a_prepare(struct drm_panel *panel)
>   	if (ctx->prepared)
>   		return 0;
>   
> +	ret = regulator_enable(ctx->supply);
> +	if (ret < 0) {
> +		DRM_ERROR("failed to enable supply: %d\n", ret);
> +		return ret;
> +	}
> +
>   	if (ctx->reset_gpio) {
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> @@ -414,6 +424,13 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
>   		return PTR_ERR(ctx->reset_gpio);
>   	}
>   
> +	ctx->supply = devm_regulator_get(dev, "power");
> +	if (IS_ERR(ctx->supply)) {
> +		ret = PTR_ERR(ctx->supply);
> +		dev_err(dev, "failed to request regulator: %d\n", ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/2] dt-bindings/display/panel: otm8009a: Add optional power-supply property

[Rob Herring]

On Mon, Feb 05, 2018 at 10:45:31AM +0100, Philippe Cornu wrote:
> Some boards use a dedicated voltage regulator for this panel.
> Add & document this related optional power-supply property.
> 
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>  Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v1 1/2] dt-bindings/display/panel: otm8009a: Add optional power-supply property

[Rob Herring]

On Mon, Feb 05, 2018 at 10:45:31AM +0100, Philippe Cornu wrote:
> Some boards use a dedicated voltage regulator for this panel.
> Add & document this related optional power-supply property.
> 
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>  Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 2/2] drm/panel: otm8009a: Add support for the optional power-supply

[Philippe CORNU]

Hi Thierry & David,

May I ask you please your feedback on this small patch?
Many thanks,

Philippe :-)

On 02/05/2018 10:45 AM, Philippe Cornu wrote:
> Add support for the optional power-supply.
> 
> Note: A "dummy regulator" is returned by devm_regulator_get()
> if the optional regulator is not present in the device tree,
> simplifying the source code when enabling/disabling the regulator.
> 
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>   drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 72530983d55d..90f1ae4af93c 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -11,6 +11,7 @@
>   #include <drm/drm_panel.h>
>   #include <linux/backlight.h>
>   #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
>   #include <video/mipi_display.h>
>   
>   #define DRV_NAME "orisetech_otm8009a"
> @@ -62,6 +63,7 @@ struct otm8009a {
>   	struct drm_panel panel;
>   	struct backlight_device *bl_dev;
>   	struct gpio_desc *reset_gpio;
> +	struct regulator *supply;
>   	bool prepared;
>   	bool enabled;
>   };
> @@ -279,6 +281,8 @@ static int otm8009a_unprepare(struct drm_panel *panel)
>   		msleep(20);
>   	}
>   
> +	regulator_disable(ctx->supply);
> +
>   	ctx->prepared = false;
>   
>   	return 0;
> @@ -292,6 +296,12 @@ static int otm8009a_prepare(struct drm_panel *panel)
>   	if (ctx->prepared)
>   		return 0;
>   
> +	ret = regulator_enable(ctx->supply);
> +	if (ret < 0) {
> +		DRM_ERROR("failed to enable supply: %d\n", ret);
> +		return ret;
> +	}
> +
>   	if (ctx->reset_gpio) {
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> @@ -414,6 +424,13 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
>   		return PTR_ERR(ctx->reset_gpio);
>   	}
>   
> +	ctx->supply = devm_regulator_get(dev, "power");
> +	if (IS_ERR(ctx->supply)) {
> +		ret = PTR_ERR(ctx->supply);
> +		dev_err(dev, "failed to request regulator: %d\n", ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;
> 

Re: [PATCH v1 2/2] drm/panel: otm8009a: Add support for the optional power-supply

[Philippe CORNU]

Hi Thierry & David,

May I ask you please your feedback on this small patch?
Many thanks,

Philippe :-)

On 02/05/2018 10:45 AM, Philippe Cornu wrote:
> Add support for the optional power-supply.
> 
> Note: A "dummy regulator" is returned by devm_regulator_get()
> if the optional regulator is not present in the device tree,
> simplifying the source code when enabling/disabling the regulator.
> 
> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
> ---
>   drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> index 72530983d55d..90f1ae4af93c 100644
> --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> @@ -11,6 +11,7 @@
>   #include <drm/drm_panel.h>
>   #include <linux/backlight.h>
>   #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
>   #include <video/mipi_display.h>
>   
>   #define DRV_NAME "orisetech_otm8009a"
> @@ -62,6 +63,7 @@ struct otm8009a {
>   	struct drm_panel panel;
>   	struct backlight_device *bl_dev;
>   	struct gpio_desc *reset_gpio;
> +	struct regulator *supply;
>   	bool prepared;
>   	bool enabled;
>   };
> @@ -279,6 +281,8 @@ static int otm8009a_unprepare(struct drm_panel *panel)
>   		msleep(20);
>   	}
>   
> +	regulator_disable(ctx->supply);
> +
>   	ctx->prepared = false;
>   
>   	return 0;
> @@ -292,6 +296,12 @@ static int otm8009a_prepare(struct drm_panel *panel)
>   	if (ctx->prepared)
>   		return 0;
>   
> +	ret = regulator_enable(ctx->supply);
> +	if (ret < 0) {
> +		DRM_ERROR("failed to enable supply: %d\n", ret);
> +		return ret;
> +	}
> +
>   	if (ctx->reset_gpio) {
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> @@ -414,6 +424,13 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
>   		return PTR_ERR(ctx->reset_gpio);
>   	}
>   
> +	ctx->supply = devm_regulator_get(dev, "power");
> +	if (IS_ERR(ctx->supply)) {
> +		ret = PTR_ERR(ctx->supply);
> +		dev_err(dev, "failed to request regulator: %d\n", ret);
> +		return ret;
> +	}
> +
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	ctx->dev = dev;
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 0/2] drm/panel: otm8009a: Add support for the optional power-supply

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 633 bytes --]

On Mon, Feb 05, 2018 at 10:45:30AM +0100, Philippe Cornu wrote:
> Some boards use a dedicated voltage regulator for this panel.
> Add & Document this related optional power-supply property and
> add its support in the driver.
> 
> Philippe Cornu (2):
>   dt-bindings/display/panel: otm8009a: Add optional power-supply
>     property
>   drm/panel: otm8009a: Add support for the optional power-supply
> 
>  .../bindings/display/panel/orisetech,otm8009a.txt       |  2 ++
>  drivers/gpu/drm/panel/panel-orisetech-otm8009a.c        | 17 +++++++++++++++++
>  2 files changed, 19 insertions(+)

Applied, thanks.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v1 0/2] drm/panel: otm8009a: Add support for the optional power-supply

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 633 bytes --]

On Mon, Feb 05, 2018 at 10:45:30AM +0100, Philippe Cornu wrote:
> Some boards use a dedicated voltage regulator for this panel.
> Add & Document this related optional power-supply property and
> add its support in the driver.
> 
> Philippe Cornu (2):
>   dt-bindings/display/panel: otm8009a: Add optional power-supply
>     property
>   drm/panel: otm8009a: Add support for the optional power-supply
> 
>  .../bindings/display/panel/orisetech,otm8009a.txt       |  2 ++
>  drivers/gpu/drm/panel/panel-orisetech-otm8009a.c        | 17 +++++++++++++++++
>  2 files changed, 19 insertions(+)

Applied, thanks.

Thierry

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel