All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Pignat <marc@pignat.org>
To: Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Subject: [PATCH] gpio: add NCT5104D gpio driver
Date: Thu, 9 Feb 2017 11:54:07 +0100	[thread overview]
Message-ID: <77f71974-541e-7e06-d37d-c52b9623ed25@pignat.org> (raw)

From: Tasanakorn Phaipool <tasanakorn@gmail.com>
Subject: [PATCH] gpio: add NCT5104D gpio driver

Add gpio support for Nuvoton NCT5104d found on pcengines APU, APU2 and
APU3 system boards.

Signed-off-by: Marc Pignat <marc@pignat.org>
---

Dear all,

This driver is needed to use gpios on pcengines APU boards (https://www.pcengines.ch/apu2.htm).
The original driver comes from https://github.com/tasanakorn/linux-gpio-nct5104d.

I (think I) have fixed coding style issues and I have tested it on a APU board.

Could you please have a look at it?

Thank you in advance and best regards



Marc




 drivers/gpio/Kconfig         |  10 +
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-nct5104d.c | 438 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 449 insertions(+)
 create mode 100644 drivers/gpio/gpio-nct5104d.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d5d3654..dd5ff27 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -602,6 +602,16 @@ config GPIO_IT87
 	  To compile this driver as a module, choose M here: the module will
 	  be called gpio_it87
 
+config GPIO_NCT5104D
+	tristate "NCT5104D GPIO support"
+	help
+	  Say yes here to support GPIO functionality of NCT5104D Super I/O chips.
+
+	  This driver is tested with Nuvoton NCT5104D Super I/O chip.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio_nct5104d
+
 config GPIO_SCH
 	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
 	depends on (X86 || COMPILE_TEST) && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a7676b8..88ea5d8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
 obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
 obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
+obj-$(CONFIG_GPIO_NCT5104D)		+= gpio-nct5104d.o
 obj-$(CONFIG_GPIO_OCTEON)	+= gpio-octeon.o
 obj-$(CONFIG_GPIO_OMAP)		+= gpio-omap.o
 obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
diff --git a/drivers/gpio/gpio-nct5104d.c b/drivers/gpio/gpio-nct5104d.c
new file mode 100644
index 0000000..127d468
--- /dev/null
+++ b/drivers/gpio/gpio-nct5104d.c
@@ -0,0 +1,438 @@
+/*
+ * GPIO driver for NCT5104D
+ *
+ * Author: Tasanakorn Phaipool <tasanakorn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#define DRVNAME "gpio-nct5104d"
+
+/*
+ * Super-I/O registers
+ */
+#define SIO_LDSEL		0x07	/* Logical device select */
+#define SIO_CHIPID		0x20	/* Chaip ID (2 bytes) */
+#define SIO_GPIO_ENABLE		0x30	/* GPIO enable */
+#define SIO_GPIO1_MODE		0xE0	/* GPIO1 Mode OpenDrain/Push-Pull */
+#define SIO_GPIO2_MODE		0xE1	/* GPIO2 Mode OpenDrain/Push-Pull */
+
+#define SIO_LD_GPIO		0x07	/* GPIO logical device */
+#define SIO_LD_GPIO_MODE	0x0F	/* GPIO mode control device */
+#define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
+
+#define SIO_NCT5104D_ID			0x1061	/* Chip ID */
+#define SIO_PCENGINES_APU_NCT5104D_ID	0xc452	/* Chip ID */
+
+enum chips { nct5104d };
+
+static const char * const nct5104d_names[] = {
+	"nct5104d"
+};
+
+struct nct5104d_sio {
+	int addr;
+	enum chips type;
+};
+
+struct nct5104d_gpio_bank {
+	struct gpio_chip chip;
+	unsigned int regbase;
+	struct nct5104d_gpio_data *data;
+};
+
+struct nct5104d_gpio_data {
+	struct nct5104d_sio *sio;
+	int nr_bank;
+	struct nct5104d_gpio_bank *bank;
+};
+
+/*
+ * Super-I/O functions.
+ */
+
+static inline int superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+	int val;
+
+	outb(reg++, base);
+	val = inb(base + 1) << 8;
+	outb(reg, base);
+	val |= inb(base + 1);
+
+	return val;
+}
+
+static inline void superio_outb(int base, int reg, int val)
+{
+	outb(reg, base);
+	outb(val, base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+	/* Don't step on other drivers' I/O space by accident. */
+	if (!request_muxed_region(base, 2, DRVNAME)) {
+		pr_err(DRVNAME "I/O address 0x%04x already in use\n", base);
+		return -EBUSY;
+	}
+
+	/* According to the datasheet the key must be send twice. */
+	outb(SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+	outb(SIO_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
+}
+
+/*
+ * GPIO chip.
+ */
+
+static int nct5104d_gpio_direction_in(struct gpio_chip *chip,
+				      unsigned int offset);
+static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned int offset);
+static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
+				       unsigned int offset, int value);
+static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			      int value);
+
+#define NCT5104D_GPIO_BANK(_base, _ngpio, _regbase)			\
+	{								\
+		.chip = {						\
+			.label            = DRVNAME,			\
+			.owner            = THIS_MODULE,		\
+			.direction_input  = nct5104d_gpio_direction_in,	\
+			.get              = nct5104d_gpio_get,		\
+			.direction_output = nct5104d_gpio_direction_out,\
+			.set              = nct5104d_gpio_set,		\
+			.base             = _base,			\
+			.ngpio            = _ngpio,			\
+			.can_sleep        = true,			\
+		},							\
+		.regbase = _regbase,					\
+	}
+
+#define gpio_dir(base) (base + 0)
+#define gpio_data(base) (base + 1)
+
+static struct nct5104d_gpio_bank nct5104d_gpio_bank[] = {
+	NCT5104D_GPIO_BANK(0,  8, 0xE0),
+	NCT5104D_GPIO_BANK(10, 8, 0xE4)
+};
+
+static int nct5104d_gpio_direction_in(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 dir;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir |= (1 << offset);
+	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+	superio_exit(sio->addr);
+
+	return 0;
+}
+
+static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 data;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data = superio_inb(sio->addr, gpio_data(bank->regbase));
+
+	superio_exit(sio->addr);
+
+	return !!(data & 1 << offset);
+}
+
+static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 dir, data_out;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
+	if (value)
+		data_out |= (1 << offset);
+	else
+		data_out &= ~(1 << offset);
+	superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir &= ~(1 << offset);
+	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+	superio_exit(sio->addr);
+
+	return 0;
+}
+
+static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			      int value)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 data_out;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
+	if (value)
+		data_out |= (1 << offset);
+	else
+		data_out &= ~(1 << offset);
+	superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
+
+	superio_exit(sio->addr);
+}
+
+/*
+ * Platform device and driver.
+ */
+
+static int nct5104d_gpio_probe(struct platform_device *pdev)
+{
+	int err;
+	int i;
+	struct nct5104d_sio *sio = pdev->dev.platform_data;
+	struct nct5104d_gpio_data *data;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	switch (sio->type) {
+	case nct5104d:
+		data->nr_bank = ARRAY_SIZE(nct5104d_gpio_bank);
+		data->bank = nct5104d_gpio_bank;
+		break;
+	default:
+		return -ENODEV;
+	}
+	data->sio = sio;
+
+	platform_set_drvdata(pdev, data);
+
+	/* For each GPIO bank, register a GPIO chip. */
+	for (i = 0; i < data->nr_bank; i++) {
+		struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+		bank->chip.parent = &pdev->dev;
+		bank->data = data;
+
+		err = gpiochip_add(&bank->chip);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to register gpiochip %d: %d\n",
+				i, err);
+			goto err_gpiochip;
+		}
+	}
+
+	return 0;
+
+err_gpiochip:
+	for (i = i - 1; i >= 0; i--) {
+		struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+		gpiochip_remove(&bank->chip);
+	}
+
+	return err;
+}
+
+static int nct5104d_gpio_remove(struct platform_device *pdev)
+{
+	int i;
+	struct nct5104d_gpio_data *data = platform_get_drvdata(pdev);
+
+	for (i = 0; i < data->nr_bank; i++) {
+		struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+		gpiochip_remove(&bank->chip);
+	}
+
+	return 0;
+}
+
+static int __init nct5104d_find(int addr, struct nct5104d_sio *sio)
+{
+	int err;
+	u16 devid;
+	u8 gpio_cfg;
+
+	err = superio_enter(addr);
+	if (err)
+		return err;
+
+	err = -ENODEV;
+
+	devid = superio_inw(addr, SIO_CHIPID);
+	switch (devid) {
+	case SIO_NCT5104D_ID:
+	case SIO_PCENGINES_APU_NCT5104D_ID:
+		sio->type = nct5104d;
+		/* enable GPIO0 and GPIO1 */
+		superio_select(addr, SIO_LD_GPIO);
+		gpio_cfg = superio_inb(addr, SIO_GPIO_ENABLE);
+		gpio_cfg |= 0x03;
+		superio_outb(addr, SIO_GPIO_ENABLE, gpio_cfg);
+		break;
+	default:
+		pr_info(DRVNAME ": Unsupported device 0x%04x\n", devid);
+		goto err;
+	}
+	sio->addr = addr;
+	err = 0;
+
+	pr_info(DRVNAME ": Found %s at %#x chip id 0x%04x\n",
+		nct5104d_names[sio->type],
+		(unsigned int) addr,
+		(int) superio_inw(addr, SIO_CHIPID));
+
+	superio_select(sio->addr, SIO_LD_GPIO_MODE);
+	superio_outb(sio->addr, SIO_GPIO1_MODE, 0x0);
+	superio_outb(sio->addr, SIO_GPIO2_MODE, 0x0);
+
+err:
+	superio_exit(addr);
+	return err;
+}
+
+static struct platform_device *nct5104d_gpio_pdev;
+
+static int __init
+nct5104d_gpio_device_add(const struct nct5104d_sio *sio)
+{
+	int err;
+
+	nct5104d_gpio_pdev = platform_device_alloc(DRVNAME, -1);
+	if (!nct5104d_gpio_pdev)
+		pr_err(DRVNAME ": Error platform_device_alloc\n");
+	if (!nct5104d_gpio_pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_data(nct5104d_gpio_pdev,
+				       sio, sizeof(*sio));
+	if (err) {
+		pr_err(DRVNAME "Platform data allocation failed\n");
+		goto err;
+	}
+
+	err = platform_device_add(nct5104d_gpio_pdev);
+	if (err) {
+		pr_err(DRVNAME "Device addition failed\n");
+		goto err;
+	}
+	pr_info(DRVNAME ": Device added\n");
+	return 0;
+
+err:
+	platform_device_put(nct5104d_gpio_pdev);
+
+	return err;
+}
+
+/*
+ */
+
+static struct platform_driver nct5104d_gpio_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRVNAME,
+	},
+	.probe		= nct5104d_gpio_probe,
+	.remove		= nct5104d_gpio_remove,
+};
+
+static int __init nct5104d_gpio_init(void)
+{
+	int err;
+	struct nct5104d_sio sio;
+
+	if (nct5104d_find(0x2e, &sio) &&
+	    nct5104d_find(0x4e, &sio))
+		return -ENODEV;
+
+	err = platform_driver_register(&nct5104d_gpio_driver);
+	if (!err) {
+		pr_info(DRVNAME ": platform_driver_register\n");
+		err = nct5104d_gpio_device_add(&sio);
+		if (err)
+			platform_driver_unregister(&nct5104d_gpio_driver);
+	}
+
+	return err;
+}
+subsys_initcall(nct5104d_gpio_init);
+
+static void __exit nct5104d_gpio_exit(void)
+{
+	platform_device_unregister(nct5104d_gpio_pdev);
+	platform_driver_unregister(&nct5104d_gpio_driver);
+}
+module_exit(nct5104d_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO driver for Super-I/O chips NCT5104D");
+MODULE_AUTHOR("Tasanakorn Phaipool <tasanakorn@gmail.com>");
+MODULE_LICENSE("GPL");
+
-- 
2.7.4


             reply	other threads:[~2017-02-09 12:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-09 10:54 Marc Pignat [this message]
2017-02-22 14:52 ` [PATCH] gpio: add NCT5104D gpio driver Linus Walleij
2017-02-22 21:04   ` William Breathitt Gray
2017-02-23 12:40     ` Marc Pignat
2017-02-28  8:14     ` [PATCH,v2 0/1] " Marc Pignat
2021-03-25  8:23       ` Linus Walleij
2021-03-26  6:42         ` William Breathitt Gray
2017-02-28  8:19     ` [PATCH,v2 1/1] " Marc Pignat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=77f71974-541e-7e06-d37d-c52b9623ed25@pignat.org \
    --to=marc@pignat.org \
    --cc=gnurou@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.