From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dr. Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Date: Mon, 20 Feb 2017 11:21:17 +0100
Subject: [U-Boot] [PATCH v1 1/2] sunxi (sun50i): support i2c on A64
	(pin-config, clocking)
In-Reply-To: <e3388223-b556-1e20-705a-d5620914af47@arm.com>
References: <cover.1487340618.git.philipp.tomsich@theobroma-systems.com>
 <d73cf056e0f7fc02b743a59e217426ee846b7047.1487340618.git.philipp.tomsich@theobroma-systems.com>
 <f5288991-2f72-9995-508b-f1b21f318cda@arm.com>
 <490047B0-CCD8-419E-8527-B9D539AD7412@theobroma-systems.com>
 <e3388223-b556-1e20-705a-d5620914af47@arm.com>
Message-ID: <7F98C3A8-B3ED-4782-A81B-633334173793@theobroma-systems.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


> On 20 Feb 2017, at 11:18, Andre Przywara <andre.przywara@arm.com> wrote:
> 
>> Our board?s early-stage normally shouldn't need to do anything on this I2C
>> bus, but customer boards may come up with a use for it (image this going
>> towards battery/power managing circuitry on a baseboard).
> 
> In this case we should definitely remove these three lines.

I should have said ?we don?t do anything with this I2C bus, but it?s available
for customer use via the edge connector and a header on our eval-board?.

As there?s no way to enable pull-ups via a command in U-Boot, I?d prefer
to keep these pull ups configured.

Regards,
Philipp.