On Jul 24, 2020, at 6:01 AM, khader basha shaik <shaikkhaderbasha601@gmail.com> wrote:
Hi Joseph,Thanks for your response.I will be using Raspberrypi3 system.Can you please guide what further steps I should take in order to view the /redfish/v1 content in the web(https://xxx.xxx.xxx:8000/redfish/v1).Any pointer on this is really helpful.I have gone through the documents the developer docs but could not find anything that points to enabling the redfish stuff in the browser.Please correct me if i am wrongThanks & Regards,Khader B ShaikOn Thu, 23 Jul 2020 at 19:25, Joseph Reynolds <jrey@linux.ibm.com> wrote:On 7/23/20 5:48 AM, khader basha shaik wrote:
> Hi Team,
>
> I am newbiee to Openbmc. I want to view the redfish/v1
> (https://10.xxx.xxx.xxx:8000/redfish/v1) contents in the browser
> .Could you please guide me on what changes i need to so that i view
> the /redfish/v1/ content in the browser .
>
> here are the steps i have followed:
>
> 1. Clone OpenBMC project : git clone
> https://github.com/openbmc/openbmc.git in the server machine .
> 2. Compile using the following command:
> TEMPLATECONF=meta-phosphor/conf . openbmc-env
> 3. modify the following files:
>
> * #build vi conf/local.conf (modify the line "-MACHINE??=qemuarm"
> " to "-MACHINE??=raspberrypi3-64" "
> * #build vi conf/bblayer.conf (add the following line
> "/home/khader<username>/openbmc/meta-raspberrypi \" to the line
> above /home/khader<username>/openbmc/metaphosphor \"
>
> 4. #build bitbake obmc-phosphor-image
>
> The above steps I have used to build an Openbmc project.
>
>
> Can you help me what further steps should i need to do so that i can
> view the /redfish/v1/ content in the webbrowser.
What BMC system will you use to upload, boot, and run the BMC firmware
image? A QEMU virtual system?
Have you seen the developer docs here?
https://github.com/openbmc/docs/tree/master/development
Good luck,
- Joseph
>
> Note:- I am compiling the openbmc code in the server machine.
>
> Any help /guidelines on this will really help me alot.
> Appreciate all your help.
>
> Thanks & Regards,
> khader B Shaik