All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org,
	edubezval@gmail.com, andy.gross@linaro.org, vkoul@kernel.org,
	David Brown <david.brown@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v1 4/4] arm64: dts: qcom: qcs404: Add thermal zones for each sensor
Date: Tue, 16 Oct 2018 00:10:43 +0530	[thread overview]
Message-ID: <7a0c3d8b7a751d6549b063efee718cdb1741f473.1539627762.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1539627762.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1539627762.git.amit.kucheria@linaro.org>

qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 206 +++++++++++++++++++++++++++
 1 file changed, 206 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index dfd65c53cf5f..ea882a9ce6e3 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -69,6 +69,7 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU1: cpu@1 {
@@ -77,6 +78,7 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU2: cpu@2 {
@@ -85,6 +87,7 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		CPU3: cpu@3 {
@@ -93,6 +96,7 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells= <2>;
 		};
 
 		L2_0: l2-cache {
@@ -484,4 +488,206 @@
 			label = "wcss";
 		};
 	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				aoss_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				dsp_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				dsp_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				lpass_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				lpass_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				wlan_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				wlan_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cluster_alert: cluster_alert {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster_crit: cluster_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: cpu_crit0 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
-- 
2.17.1

  parent reply	other threads:[~2018-10-15 18:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-15 18:40 [PATCH v1 0/4] thermal: tsens: Add support for QCS404 platform Amit Kucheria
2018-10-15 18:40 ` [PATCH v1 1/4] dt: thermal: tsens: Add bindings for qcs404 Amit Kucheria
2018-10-15 18:40 ` [PATCH v1 2/4] drivers: thermal: tsens: Add generic support for TSENS v1 IP Amit Kucheria
2018-10-15 18:40 ` [PATCH v1 3/4] arm64: dts: qcom: qcs404: Add tsens controller Amit Kucheria
2018-10-31  7:47   ` Vinod Koul
2018-10-15 18:40 ` Amit Kucheria [this message]
2018-10-31  7:45 ` [PATCH v1 0/4] thermal: tsens: Add support for QCS404 platform Vinod

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7a0c3d8b7a751d6549b063efee718cdb1741f473.1539627762.git.amit.kucheria@linaro.org \
    --to=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=edubezval@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.