From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thor Thayer Subject: Re: [PATCH 2/3] Documentation: dt: i2c: Add Altera I2C Controller Date: Fri, 14 Apr 2017 08:46:28 -0500 Message-ID: <7c803e53-5c1b-cd59-6c59-5a32b07edcb8@linux.intel.com> References: <1491926547-29510-1-git-send-email-thor.thayer@linux.intel.com> <1491926547-29510-3-git-send-email-thor.thayer@linux.intel.com> <20170413212240.uxwh5525baqmgny4@rob-hp-laptop> Reply-To: thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170413212240.uxwh5525baqmgny4@rob-hp-laptop> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring Cc: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Rob, On 04/13/2017 04:22 PM, Rob Herring wrote: > On Tue, Apr 11, 2017 at 11:02:26AM -0500, thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org wrote: >> From: Thor Thayer >> >> Add the documentation to support the Altera I2C Controller. > > "dt-bindings: i2c: ..." for the subject. > Got it. Thanks. >> >> Signed-off-by: Thor Thayer >> --- >> .../devicetree/bindings/i2c/i2c-altera.txt | 37 ++++++++++++++++++++++ >> 1 file changed, 37 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-altera.txt >> >> diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt >> new file mode 100644 >> index 0000000..a67241c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt >> @@ -0,0 +1,37 @@ >> +* Altera I2C Controller > > This is the only one? For synthesizable logic or a hard block in > socfpga? > This is synthesizable logic in an FPGA. >> + >> +Required properties : >> + - compatible : should be "altr,sip-i2c" > > Seems kind of generic. > I'm using sip for soft IP - right now we only offer 1 flavor. >> + - reg : Offset and length of the register set for the device >> + - interrupts : where IRQ is the interrupt number. >> + - clocks : phandles to input clocks. > > Need to specify how many clocks. > OK. There is only 1 so I'll change to singular. phandle to input clock. >> + - #address-cells = <1>; >> + - #size-cells = <0>; >> + >> +Recommended properties : >> + - clock-frequency : desired I2C bus clock frequency in Hz. >> + >> +Optional properties : >> + - altr,fifo-size : Size of the RX and TX FIFOs. > > in bytes? > > Just "fifo-size" is already fairly common, so drop the vendor prefix. > Yes, it is in bytes. I'll make the change. Thanks for reviewing! >> + - Child nodes conforming to i2c bus binding >> + >> +Example : >> + >> + i2c@100080000 { >> + compatible = "altr,sip-i2c"; >> + reg = <0x00000001 0x00080000 0x00000040>; >> + interrupt-parent = <&intc>; >> + interrupts = <0 43 4>; >> + clocks = <&clk_0>; >> + clock-frequency = <100000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + altr,fifo-size = <4>; >> + >> + eeprom@51 { >> + compatible = "atmel,24c32"; >> + reg = <0x51>; >> + pagesize = <32>; >> + }; >> + }; >> + >> -- >> 1.9.1 >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html