ubuntu@ubuntu:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.14 (lnxbuild@bait-qsvbuild-13-bldr-lnx) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #1 SMP Thu Feb 15 19:52:35 MST 2018 [ 0.000000] Boot CPU: AArch64 Processor [510f8000] [ 0.000000] earlycon: pl11 at MMIO32 0x000000ff78ed1000 (options '') [ 0.000000] bootconsole [pl11] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.60 by Qualcomm [ 0.000000] efi: ACPI 2.0=0x8bd0000 PROP=0xdf695c8 SMBIOS 3.0=0x4c20000 ESRT=0xa4c1c18 MEMATTR=0xa401018 RNG=0xdf16a98 [ 0.000000] random: fast init done [ 0.000000] efi: seeding entropy pool [ 0.000000] efi: memattr: Unexpected EFI Memory Attributes table version -520764131 [ 0.000000] esrt: Unsupported ESRT version 4637552977029017975. [ 0.000000] ITS: reserved prop table memory [0x0000179a960000-0x0000179a96ffff] [ 0.000000] ITS: reserved pend table memory [0x0000179aa00000-0x0000179aa0ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793fa0000-0x00001793faffff] [ 0.000000] ITS: reserved pend table memory [0x00001793ff0000-0x00001793ffffff] [ 0.000000] ITS: reserved pend table memory [0x00001793840000-0x0000179384ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793890000-0x0000179389ffff] [ 0.000000] ITS: reserved pend table memory [0x000017938d0000-0x000017938dffff] [ 0.000000] ITS: reserved pend table memory [0x00001793930000-0x0000179393ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793980000-0x0000179398ffff] [ 0.000000] ITS: reserved pend table memory [0x000017939c0000-0x000017939cffff] [ 0.000000] ITS: reserved pend table memory [0x00001793a30000-0x00001793a3ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793a70000-0x00001793a7ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793ab0000-0x00001793abffff] [ 0.000000] ITS: reserved pend table memory [0x00001793b20000-0x00001793b2ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793b60000-0x00001793b6ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793ba0000-0x00001793baffff] [ 0.000000] ITS: reserved pend table memory [0x00001793400000-0x0000179340ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793450000-0x0000179345ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793490000-0x0000179349ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793500000-0x0000179350ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793540000-0x0000179354ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793580000-0x0000179358ffff] [ 0.000000] ITS: reserved pend table memory [0x000017935f0000-0x000017935fffff] [ 0.000000] ITS: reserved pend table memory [0x00001793630000-0x0000179363ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793670000-0x0000179367ffff] [ 0.000000] ITS: reserved pend table memory [0x000017936c0000-0x000017936cffff] [ 0.000000] ITS: reserved pend table memory [0x00001793720000-0x0000179372ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793760000-0x0000179376ffff] [ 0.000000] ITS: reserved pend table memory [0x000017937a0000-0x000017937affff] [ 0.000000] ITS: reserved pend table memory [0x00001793010000-0x0000179301ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793060000-0x0000179306ffff] [ 0.000000] ITS: reserved pend table memory [0x000017930a0000-0x000017930affff] [ 0.000000] ITS: reserved pend table memory [0x00001793100000-0x0000179310ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793140000-0x0000179314ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793180000-0x0000179318ffff] [ 0.000000] ITS: reserved pend table memory [0x000017931f0000-0x000017931fffff] [ 0.000000] ITS: reserved pend table memory [0x00001793230000-0x0000179323ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793280000-0x0000179328ffff] [ 0.000000] ITS: reserved pend table memory [0x000017932e0000-0x000017932effff] [ 0.000000] ITS: reserved pend table memory [0x00001793320000-0x0000179332ffff] [ 0.000000] ITS: reserved pend table memory [0x00001793370000-0x0000179337ffff] [ 0.000000] ITS: reserved pend table memory [0x000017933d0000-0x000017933dffff] [ 0.000000] ITS: reserved pend table memory [0x00001792c10000-0x00001792c1ffff] [ 0.000000] ITS: reserved pend table memory [0x00001792c50000-0x00001792c5ffff] [ 0.000000] ITS: reserved pend table memory [0x00001792cb0000-0x00001792cbffff] [ 0.000000] ITS: reserved pend table memory [0x00001792d10000-0x00001792d1ffff] [ 0.000000] ITS: reserved pend table memory [0x00001792d50000-0x00001792d5ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000008BD0000 000024 (v02 QCOM ) [ 0.000000] ACPI: XSDT 0x0000000008BC0000 000094 (v01 QCOM QDF2400 00000000 QCOM 00000001) [ 0.000000] ACPI: FACP 0x0000000008880000 000114 (v06 QCOM QDF2400 00000000 INTL 20150515) [ 0.000000] ACPI: DSDT 0x00000000088A0000 0332B6 (v02 QCOM QDF2400 00000004 INTL 20150515) [ 0.000000] ACPI: DBG2 0x0000000008930000 000072 (v00 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: IORT 0x0000000008910000 000D40 (v00 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: TPM2 0x0000000008900000 000040 (v04 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: BERT 0x00000000088E0000 000030 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: EINJ 0x0000000008890000 000150 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: GTDT 0x0000000008870000 00007C (v02 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: PCCT 0x0000000008850000 0000AC (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: SPMI 0x0000000008840000 000041 (v04 QCOM QDF2400 00000000 INTL 20150515) [ 0.000000] ACPI: PPTT 0x00000000083B0000 000736 (v01 QCOM QDF2400 00000002 INTL 20150515) [ 0.000000] ACPI: APIC 0x00000000088F0000 000ED0 (v04 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: HEST 0x0000000008920000 000288 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: MCFG 0x0000000008860000 00005C (v01 QCOM QDF2400 00000001 QCOM 00000001) [ 0.000000] ACPI: SPCR 0x0000000004C00000 000050 (v04 QCOM QDF2400 00000001 QCOM 00000001) [ 0.000000] ACPI: SPCR: console: pl011,mmio32,0xff78ed1000,115200 [ 0.000000] ACPI: NUMA: Failed to initialise from firmware [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000017ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17fffdee80-0x17fffe1fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000017ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x000000000021ffff] [ 0.000000] node 0: [mem 0x0000000000820000-0x000000000307ffff] [ 0.000000] node 0: [mem 0x0000000003080000-0x000000000308ffff] [ 0.000000] node 0: [mem 0x0000000003090000-0x00000000031fffff] [ 0.000000] node 0: [mem 0x0000000003200000-0x00000000033fffff] [ 0.000000] node 0: [mem 0x0000000003410000-0x0000000004c0ffff] [ 0.000000] node 0: [mem 0x0000000004c10000-0x0000000004c2ffff] [ 0.000000] node 0: [mem 0x0000000004c30000-0x0000000004c3dfff] [ 0.000000] node 0: [mem 0x0000000004c3e000-0x0000000004c41fff] [ 0.000000] node 0: [mem 0x0000000004c42000-0x0000000004c4cfff] [ 0.000000] node 0: [mem 0x0000000004c4d000-0x0000000007c61fff] [ 0.000000] node 0: [mem 0x0000000007c62000-0x0000000007d6ffff] [ 0.000000] node 0: [mem 0x0000000007d70000-0x0000000007eeffff] [ 0.000000] node 0: [mem 0x0000000007ef0000-0x0000000007f0ffff] [ 0.000000] node 0: [mem 0x0000000007f10000-0x0000000007faffff] [ 0.000000] node 0: [mem 0x0000000007fb0000-0x0000000008310fff] [ 0.000000] node 0: [mem 0x0000000008311000-0x0000000008316fff] [ 0.000000] node 0: [mem 0x0000000008317000-0x00000000083c0fff] [ 0.000000] node 0: [mem 0x00000000083c1000-0x00000000083c6fff] [ 0.000000] node 0: [mem 0x00000000083c7000-0x00000000083effff] [ 0.000000] node 0: [mem 0x00000000083f0000-0x00000000085dffff] [ 0.000000] node 0: [mem 0x00000000085e0000-0x00000000085e0fff] [ 0.000000] node 0: [mem 0x00000000085e1000-0x00000000085e3fff] [ 0.000000] node 0: [mem 0x00000000085e4000-0x00000000085fffff] [ 0.000000] node 0: [mem 0x0000000008600000-0x000000000860ffff] [ 0.000000] node 0: [mem 0x0000000008610000-0x000000000863ffff] [ 0.000000] node 0: [mem 0x0000000008640000-0x00000000087affff] [ 0.000000] node 0: [mem 0x00000000087b0000-0x0000000008940fff] [ 0.000000] node 0: [mem 0x0000000008941000-0x0000000008943fff] [ 0.000000] node 0: [mem 0x0000000008944000-0x000000000896ffff] [ 0.000000] node 0: [mem 0x0000000008970000-0x0000000008a0ffff] [ 0.000000] node 0: [mem 0x0000000008a10000-0x0000000008a7ffff] [ 0.000000] node 0: [mem 0x0000000008a80000-0x0000000008bbffff] [ 0.000000] node 0: [mem 0x0000000008bc0000-0x0000000008bdffff] [ 0.000000] node 0: [mem 0x0000000008be0000-0x0000000008f02fff] [ 0.000000] node 0: [mem 0x0000000008f03000-0x000000000deeffff] [ 0.000000] node 0: [mem 0x000000000def0000-0x000000000df1ffff] [ 0.000000] node 0: [mem 0x000000000df20000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010800000-0x0000000017feffff] [ 0.000000] node 0: [mem 0x000000001c000000-0x000000001c00ffff] [ 0.000000] node 0: [mem 0x000000001c010000-0x000000001c7fffff] [ 0.000000] node 0: [mem 0x000000001c810000-0x000000007efbffff] [ 0.000000] node 0: [mem 0x000000007efc0000-0x000000007efdffff] [ 0.000000] node 0: [mem 0x000000007efe0000-0x000000007efeffff] [ 0.000000] node 0: [mem 0x000000007eff0000-0x000000007effffff] [ 0.000000] node 0: [mem 0x000000007f000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000017ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000017ffffffff] [ 0.000000] On node 0 totalpages: 25145296 [ 0.000000] DMA zone: 16376 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1028048 pages, LIFO batch:31 [ 0.000000] Normal zone: 376832 pages used for memmap [ 0.000000] Normal zone: 24117248 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from ACPI. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] percpu: Embedded 28 pages/cpu @ffff80179f6f8000 s77592 r8192 d28904 u114688 [ 0.000000] pcpu-alloc: s77592 r8192 d28904 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 0.000000] pcpu-alloc: [0] 32 [0] 33 [0] 34 [0] 35 [0] 36 [0] 37 [0] 38 [0] 39 [ 0.000000] pcpu-alloc: [0] 40 [0] 41 [0] 42 [0] 43 [0] 44 [0] 45 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Falkor erratum 1003 [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Falkor erratum 1009 [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Falkor erratum 1029 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 24752088 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: \EFI\BOOT\Image user_debug=31 loglevel=9 uefi_debug e1000e.IntMode=1 pci=pcie_bus_safe pcie_aspm.policy=default cpuidle.off=0 rootwait rw root=PARTUUID=76ec3f97-3414-4896-a317-340ffa63adc6 rootfstype=ext4 initrd=initramfs.img earlycon=pl011,mmio32,0xff78ed1000 "" "" "" "" "" "" "" "" [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 184320 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 3584(21%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0xfbffe000-0xffffe000] (64MB) mapped at [ffff8000fbffe000-ffff8000ffffdfff] [ 0.000000] Memory: 97722852K/100581184K available (10556K kernel code, 1596K rwdata, 4236K rodata, 5312K init, 970K bss, 2858332K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008ad0000 ( 10560 KB) [ 0.000000] .rodata : 0xffff000008ad0000 - 0xffff000008f00000 ( 4288 KB) [ 0.000000] .init : 0xffff000008f00000 - 0xffff000009430000 ( 5312 KB) [ 0.000000] .data : 0xffff000009430000 - 0xffff0000095bf200 ( 1597 KB) [ 0.000000] .bss : 0xffff0000095bf200 - 0xffff0000096b1c80 ( 971 KB) [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000008000 - 0xffff7e0060000000 ( 1535 MB actual) [ 0.000000] memory : 0xffff800000200000 - 0xffff801800000000 ( 98302 MB) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=46, Nodes=1 [ 0.000000] ftrace: allocating 37871 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=46. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=46 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: VLPI support, no direct LPI support [ 0.000000] ACPI: SRAT not present [ 0.000000] ITS [mem 0xff7efe0000-0xff7effffff] [ 0.000000] ITS@0x000000ff7efe0000: Using ITS number 0 [ 0.000000] GIC: enabling workaround for ITS: QDF2400 erratum 0065 [ 0.000000] ITS@0x000000ff7efe0000: allocated 524288 Devices @179e800000 (indirect, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x000000ff7efe0000: allocated 8192 Interrupt Collections @179f150000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x000000ff7efe0000: allocated 65536 Virtual CPUs @179f180000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] GIC: using LPI property table @0x000000179a960000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] ITS: Allocated DevID ffffffff as GICv4 proxy device (64 slots) [ 0.000000] ITS: Enabling GICv4 support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000ff7f000000 [ 0.000000] CPU0: using LPI pending table @0x000000179aa00000 [ 0.000000] arch_timer: cp15 timer(s) running at 20.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x49cd42e20, max_idle_ns: 440795202120 ns [ 0.000002] sched_clock: 56 bits at 20MHz, resolution 50ns, wraps every 4398046511100ns [ 0.008696] Console: colour dummy device 80x25 [ 0.013504] Remapping and enabling EFI services. [ 0.018453] EFI remap 0x0000000000200000 => 000059efedb70000 [ 0.024689] EFI remap 0x0000000003080000 => 000059efedb90000 [ 0.030927] EFI remap 0x0000000004c10000 => 000059efedba0000 [ 0.037177] EFI remap 0x0000000007d70000 => 000059efedbc0000 [ 0.043415] EFI remap 0x0000000007e00000 => 000059efedc50000 [ 0.049662] EFI remap 0x0000000007e10000 => 000059efedc60000 [ 0.055900] EFI remap 0x0000000007ea0000 => 000059efedcf0000 [ 0.062138] EFI remap 0x0000000007ec0000 => 000059efedd10000 [ 0.068381] EFI remap 0x0000000007f10000 => 000059efedd40000 [ 0.074617] EFI remap 0x0000000007f70000 => 000059efedda0000 [ 0.080857] EFI remap 0x0000000007f80000 => 000059efeddb0000 [ 0.087104] EFI remap 0x00000000083f0000 => 000059efedde0000 [ 0.093343] EFI remap 0x0000000008450000 => 000059efede40000 [ 0.099593] EFI remap 0x0000000008460000 => 000059efede50000 [ 0.105827] EFI remap 0x00000000084f0000 => 000059efedee0000 [ 0.112076] EFI remap 0x0000000008500000 => 000059efedef0000 [ 0.118313] EFI remap 0x0000000008590000 => 000059efedf80000 [ 0.124552] EFI remap 0x00000000085b0000 => 000059efedfa0000 [ 0.130798] EFI remap 0x0000000008640000 => 000059efedfd0000 [ 0.137038] EFI remap 0x00000000086a0000 => 000059efee030000 [ 0.143287] EFI remap 0x00000000086b0000 => 000059efee040000 [ 0.149526] EFI remap 0x0000000008760000 => 000059efee0f0000 [ 0.155764] EFI remap 0x0000000008770000 => 000059efee100000 [ 0.162005] EFI remap 0x0000000008970000 => 000059efee140000 [ 0.168240] EFI remap 0x00000000089d0000 => 000059efee1a0000 [ 0.174476] EFI remap 0x00000000089e0000 => 000059efee1b0000 [ 0.180719] EFI remap 0x0000000008a80000 => 000059efee1e0000 [ 0.186954] EFI remap 0x0000000008ae0000 => 000059efee240000 [ 0.193198] EFI remap 0x0000000008af0000 => 000059efee250000 [ 0.199436] EFI remap 0x0000000008b80000 => 000059efee2e0000 [ 0.205675] EFI remap 0x0000000008b90000 => 000059efee2f0000 [ 0.211918] EFI remap 0x0000000008be0000 => 000059efee320000 [ 0.218155] EFI remap 0x0000000008c40000 => 000059efee380000 [ 0.224403] EFI remap 0x0000000008c50000 => 000059efee390000 [ 0.230638] EFI remap 0x0000000008ce0000 => 000059efee420000 [ 0.236885] EFI remap 0x0000000008cf0000 => 000059efee430000 [ 0.243124] EFI remap 0x0000000008d80000 => 000059efee4c0000 [ 0.249371] EFI remap 0x0000000008d90000 => 000059efee4d0000 [ 0.255608] EFI remap 0x0000000008e20000 => 000059efee560000 [ 0.261851] EFI remap 0x0000000008e30000 => 000059efee570000 [ 0.268089] EFI remap 0x0000000008ec0000 => 000059efee600000 [ 0.274328] EFI remap 0x0000000008ed0000 => 000059efee610000 [ 0.280565] EFI remap 0x000000000def0000 => 000059efee640000 [ 0.286801] EFI remap 0x000000001c000000 => 000059efee670000 [ 0.293036] EFI remap 0x000000ff70030000 => 000059efee680000 [ 0.299272] EFI remap 0x000000ff70400000 => 000059efee690000 [ 0.305504] EFI remap 0x000000ff79000000 => 000059efee800000 [ 0.311739] EFI remap 0x000000ff79420000 => 000059efeec00000 [ 0.317973] EFI remap 0x000000ff7ac00000 => 000059efeee00000 [ 0.324205] Calibrating delay loop (skipped), value calculated using timer frequency.. 40.00 BogoMIPS (lpj=80000) [ 0.335182] pid_max: default: 47104 minimum: 368 [ 0.340137] ACPI: Core revision 20170728 [ 0.427196] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.434077] Security Framework initialized [ 0.438458] Yama: becoming mindful. [ 0.442188] SELinux: Disabled at boot. [ 0.446285] AppArmor: AppArmor disabled by boot time parameter [ 0.460600] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.472525] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.480491] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.488159] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.497126] ASID allocator initialised with 32768 entries [ 0.502948] Hierarchical SRCU implementation. [ 0.508355] PCI/MSI: ITS@0xff7efe0000 domain created [ 0.513677] Platform MSI: ITS@0xff7efe0000 domain created [ 0.520148] smp: Bringing up secondary CPUs ... [ 0.526698] Detected PIPT I-cache on CPU1 [ 0.526723] GICv3: CPU1: found redistributor 100 region 1:0x000000ff7f080000 [ 0.526739] CPU1: using LPI pending table @0x0000001793fa0000 [ 0.526784] CPU1: Booted secondary processor [510f8000] [ 0.528693] Detected PIPT I-cache on CPU2 [ 0.528717] GICv3: CPU2: found redistributor 200 region 2:0x000000ff7f100000 [ 0.528733] CPU2: using LPI pending table @0x0000001793ff0000 [ 0.528780] CPU2: Booted secondary processor [510f8000] [ 0.530669] Detected PIPT I-cache on CPU3 [ 0.530694] GICv3: CPU3: found redistributor 300 region 3:0x000000ff7f180000 [ 0.530710] CPU3: using LPI pending table @0x0000001793840000 [ 0.530757] CPU3: Booted secondary processor [510f8000] [ 0.532547] Detected PIPT I-cache on CPU4 [ 0.532572] GICv3: CPU4: found redistributor 400 region 4:0x000000ff7f200000 [ 0.532588] CPU4: using LPI pending table @0x0000001793890000 [ 0.532634] CPU4: Booted secondary processor [510f8000] [ 0.534526] Detected PIPT I-cache on CPU5 [ 0.534553] GICv3: CPU5: found redistributor 500 region 5:0x000000ff7f280000 [ 0.534568] CPU5: using LPI pending table @0x00000017938d0000 [ 0.534619] CPU5: Booted secondary processor [510f8000] [ 0.536410] Detected PIPT I-cache on CPU6 [ 0.536437] GICv3: CPU6: found redistributor 700 region 6:0x000000ff7f380000 [ 0.536452] CPU6: using LPI pending table @0x0000001793930000 [ 0.536501] CPU6: Booted secondary processor [510f8000] [ 0.538279] Detected PIPT I-cache on CPU7 [ 0.538307] GICv3: CPU7: found redistributor 800 region 7:0x000000ff7f400000 [ 0.538322] CPU7: using LPI pending table @0x0000001793980000 [ 0.538370] CPU7: Booted secondary processor [510f8000] [ 0.540235] Detected PIPT I-cache on CPU8 [ 0.540264] GICv3: CPU8: found redistributor 900 region 8:0x000000ff7f480000 [ 0.540281] CPU8: using LPI pending table @0x00000017939c0000 [ 0.540332] CPU8: Booted secondary processor [510f8000] [ 0.542201] Detected PIPT I-cache on CPU9 [ 0.542231] GICv3: CPU9: found redistributor a00 region 9:0x000000ff7f500000 [ 0.542247] CPU9: using LPI pending table @0x0000001793a30000 [ 0.542298] CPU9: Booted secondary processor [510f8000] [ 0.544062] Detected PIPT I-cache on CPU10 [ 0.544092] GICv3: CPU10: found redistributor b00 region 10:0x000000ff7f580000 [ 0.544108] CPU10: using LPI pending table @0x0000001793a70000 [ 0.544161] CPU10: Booted secondary processor [510f8000] [ 0.545872] Detected PIPT I-cache on CPU11 [ 0.545903] GICv3: CPU11: found redistributor c00 region 11:0x000000ff7f600000 [ 0.545918] CPU11: using LPI pending table @0x0000001793ab0000 [ 0.545972] CPU11: Booted secondary processor [510f8000] [ 0.547846] Detected PIPT I-cache on CPU12 [ 0.547878] GICv3: CPU12: found redistributor d00 region 12:0x000000ff7f680000 [ 0.547894] CPU12: using LPI pending table @0x0000001793b20000 [ 0.547948] CPU12: Booted secondary processor [510f8000] [ 0.549789] Detected PIPT I-cache on CPU13 [ 0.549821] GICv3: CPU13: found redistributor e00 region 13:0x000000ff7f700000 [ 0.549837] CPU13: using LPI pending table @0x0000001793b60000 [ 0.549891] CPU13: Booted secondary processor [510f8000] [ 0.551610] Detected PIPT I-cache on CPU14 [ 0.551644] GICv3: CPU14: found redistributor f00 region 14:0x000000ff7f780000 [ 0.551659] CPU14: using LPI pending table @0x0000001793ba0000 [ 0.551713] CPU14: Booted secondary processor [510f8000] [ 0.553494] Detected PIPT I-cache on CPU15 [ 0.553527] GICv3: CPU15: found redistributor 1000 region 15:0x000000ff7f800000 [ 0.553542] CPU15: using LPI pending table @0x0000001793400000 [ 0.553596] CPU15: Booted secondary processor [510f8000] [ 0.555469] Detected PIPT I-cache on CPU16 [ 0.555502] GICv3: CPU16: found redistributor 1100 region 16:0x000000ff7f880000 [ 0.555518] CPU16: using LPI pending table @0x0000001793450000 [ 0.555573] CPU16: Booted secondary processor [510f8000] [ 0.557465] Detected PIPT I-cache on CPU17 [ 0.557499] GICv3: CPU17: found redistributor 1200 region 17:0x000000ff7f900000 [ 0.557514] CPU17: using LPI pending table @0x0000001793490000 [ 0.557570] CPU17: Booted secondary processor [510f8000] [ 0.559365] Detected PIPT I-cache on CPU18 [ 0.559399] GICv3: CPU18: found redistributor 1300 region 18:0x000000ff7f980000 [ 0.559415] CPU18: using LPI pending table @0x0000001793500000 [ 0.559472] CPU18: Booted secondary processor [510f8000] [ 0.561285] Detected PIPT I-cache on CPU19 [ 0.561319] GICv3: CPU19: found redistributor 1400 region 19:0x000000ff7fa00000 [ 0.561334] CPU19: using LPI pending table @0x0000001793540000 [ 0.561388] CPU19: Booted secondary processor [510f8000] [ 0.563269] Detected PIPT I-cache on CPU20 [ 0.563305] GICv3: CPU20: found redistributor 1500 region 20:0x000000ff7fa80000 [ 0.563320] CPU20: using LPI pending table @0x0000001793580000 [ 0.563378] CPU20: Booted secondary processor [510f8000] [ 0.565244] Detected PIPT I-cache on CPU21 [ 0.565281] GICv3: CPU21: found redistributor 1600 region 21:0x000000ff7fb00000 [ 0.565297] CPU21: using LPI pending table @0x00000017935f0000 [ 0.565354] CPU21: Booted secondary processor [510f8000] [ 0.567193] Detected PIPT I-cache on CPU22 [ 0.567230] GICv3: CPU22: found redistributor 1700 region 22:0x000000ff7fb80000 [ 0.567245] CPU22: using LPI pending table @0x0000001793630000 [ 0.567302] CPU22: Booted secondary processor [510f8000] [ 0.568890] Detected PIPT I-cache on CPU23 [ 0.568917] GICv3: CPU23: found redistributor 1 region 23:0x000000ff7f040000 [ 0.568927] CPU23: using LPI pending table @0x0000001793670000 [ 0.568966] CPU23: Booted secondary processor [510f8000] [ 0.570748] Detected PIPT I-cache on CPU24 [ 0.570782] GICv3: CPU24: found redistributor 101 region 24:0x000000ff7f0c0000 [ 0.570797] CPU24: using LPI pending table @0x00000017936c0000 [ 0.570844] CPU24: Booted secondary processor [510f8000] [ 0.572692] Detected PIPT I-cache on CPU25 [ 0.572727] GICv3: CPU25: found redistributor 201 region 25:0x000000ff7f140000 [ 0.572741] CPU25: using LPI pending table @0x0000001793720000 [ 0.572791] CPU25: Booted secondary processor [510f8000] [ 0.574610] Detected PIPT I-cache on CPU26 [ 0.574646] GICv3: CPU26: found redistributor 301 region 26:0x000000ff7f1c0000 [ 0.574661] CPU26: using LPI pending table @0x0000001793760000 [ 0.574710] CPU26: Booted secondary processor [510f8000] [ 0.576543] Detected PIPT I-cache on CPU27 [ 0.576579] GICv3: CPU27: found redistributor 401 region 27:0x000000ff7f240000 [ 0.576594] CPU27: using LPI pending table @0x00000017937a0000 [ 0.576643] CPU27: Booted secondary processor [510f8000] [ 0.578514] Detected PIPT I-cache on CPU28 [ 0.578557] GICv3: CPU28: found redistributor 601 region 28:0x000000ff7f340000 [ 0.578572] CPU28: using LPI pending table @0x0000001793010000 [ 0.578634] CPU28: Booted secondary processor [510f8000] [ 0.580487] Detected PIPT I-cache on CPU29 [ 0.580527] GICv3: CPU29: found redistributor 701 region 29:0x000000ff7f3c0000 [ 0.580542] CPU29: using LPI pending table @0x0000001793060000 [ 0.580593] CPU29: Booted secondary processor [510f8000] [ 0.582349] Detected PIPT I-cache on CPU30 [ 0.582389] GICv3: CPU30: found redistributor 801 region 30:0x000000ff7f440000 [ 0.582404] CPU30: using LPI pending table @0x00000017930a0000 [ 0.582453] CPU30: Booted secondary processor [510f8000] [ 0.584272] Detected PIPT I-cache on CPU31 [ 0.584312] GICv3: CPU31: found redistributor 901 region 31:0x000000ff7f4c0000 [ 0.584327] CPU31: using LPI pending table @0x0000001793100000 [ 0.584380] CPU31: Booted secondary processor [510f8000] [ 0.586217] Detected PIPT I-cache on CPU32 [ 0.586258] GICv3: CPU32: found redistributor a01 region 32:0x000000ff7f540000 [ 0.586273] CPU32: using LPI pending table @0x0000001793140000 [ 0.586326] CPU32: Booted secondary processor [510f8000] [ 0.588098] Detected PIPT I-cache on CPU33 [ 0.588140] GICv3: CPU33: found redistributor b01 region 33:0x000000ff7f5c0000 [ 0.588155] CPU33: using LPI pending table @0x0000001793180000 [ 0.588210] CPU33: Booted secondary processor [510f8000] [ 0.589917] Detected PIPT I-cache on CPU34 [ 0.589960] GICv3: CPU34: found redistributor c01 region 34:0x000000ff7f640000 [ 0.589974] CPU34: using LPI pending table @0x00000017931f0000 [ 0.590028] CPU34: Booted secondary processor [510f8000] [ 0.591863] Detected PIPT I-cache on CPU35 [ 0.591907] GICv3: CPU35: found redistributor d01 region 35:0x000000ff7f6c0000 [ 0.591922] CPU35: using LPI pending table @0x0000001793230000 [ 0.591980] CPU35: Booted secondary processor [510f8000] [ 0.593843] Detected PIPT I-cache on CPU36 [ 0.593888] GICv3: CPU36: found redistributor e01 region 36:0x000000ff7f740000 [ 0.593903] CPU36: using LPI pending table @0x0000001793280000 [ 0.593959] CPU36: Booted secondary processor [510f8000] [ 0.595681] Detected PIPT I-cache on CPU37 [ 0.595725] GICv3: CPU37: found redistributor f01 region 37:0x000000ff7f7c0000 [ 0.595739] CPU37: using LPI pending table @0x00000017932e0000 [ 0.595796] CPU37: Booted secondary processor [510f8000] [ 0.597472] Detected PIPT I-cache on CPU38 [ 0.597517] GICv3: CPU38: found redistributor 1001 region 38:0x000000ff7f840000 [ 0.597531] CPU38: using LPI pending table @0x0000001793320000 [ 0.597585] CPU38: Booted secondary processor [510f8000] [ 0.599468] Detected PIPT I-cache on CPU39 [ 0.599513] GICv3: CPU39: found redistributor 1101 region 39:0x000000ff7f8c0000 [ 0.599528] CPU39: using LPI pending table @0x0000001793370000 [ 0.599586] CPU39: Booted secondary processor [510f8000] [ 0.601462] Detected PIPT I-cache on CPU40 [ 0.601507] GICv3: CPU40: found redistributor 1201 region 40:0x000000ff7f940000 [ 0.601522] CPU40: using LPI pending table @0x00000017933d0000 [ 0.601579] CPU40: Booted secondary processor [510f8000] [ 0.603276] Detected PIPT I-cache on CPU41 [ 0.603322] GICv3: CPU41: found redistributor 1301 region 41:0x000000ff7f9c0000 [ 0.603337] CPU41: using LPI pending table @0x0000001792c10000 [ 0.603395] CPU41: Booted secondary processor [510f8000] [ 0.605152] Detected PIPT I-cache on CPU42 [ 0.605198] GICv3: CPU42: found redistributor 1401 region 42:0x000000ff7fa40000 [ 0.605213] CPU42: using LPI pending table @0x0000001792c50000 [ 0.605268] CPU42: Booted secondary processor [510f8000] [ 0.607144] Detected PIPT I-cache on CPU43 [ 0.607191] GICv3: CPU43: found redistributor 1501 region 43:0x000000ff7fac0000 [ 0.607206] CPU43: using LPI pending table @0x0000001792cb0000 [ 0.607267] CPU43: Booted secondary processor [510f8000] [ 0.609108] Detected PIPT I-cache on CPU44 [ 0.609156] GICv3: CPU44: found redistributor 1601 region 44:0x000000ff7fb40000 [ 0.609171] CPU44: using LPI pending table @0x0000001792d10000 [ 0.609231] CPU44: Booted secondary processor [510f8000] [ 0.610984] Detected PIPT I-cache on CPU45 [ 0.611031] GICv3: CPU45: found redistributor 1701 region 45:0x000000ff7fbc0000 [ 0.611046] CPU45: using LPI pending table @0x0000001792d50000 [ 0.611105] CPU45: Booted secondary processor [510f8000] [ 0.611285] smp: Brought up 1 node, 46 CPUs [ 1.692859] SMP: Total of 46 processors activated. [ 1.697980] CPU features: detected feature: GIC system register CPU interface [ 1.705605] CPU features: detected feature: Privileged Access Never [ 1.712306] CPU features: detected feature: Kernel page table isolation (KPTI) [ 1.923161] CPU: All CPU(s) started at EL2 [ 1.927918] alternatives: patching kernel code [ 1.949231] devtmpfs: initialized [ 1.953104] evm: security.selinux [ 1.956637] evm: security.SMACK64 [ 1.960181] evm: security.SMACK64EXEC [ 1.964083] evm: security.SMACK64TRANSMUTE [ 1.968458] evm: security.SMACK64MMAP [ 1.972365] evm: security.ima [ 1.975533] evm: security.capability [ 1.980366] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.990969] futex hash table entries: 16384 (order: 9, 2097152 bytes) [ 1.998390] pinctrl core: initialized pinctrl subsystem [ 2.004399] SMBIOS 3.1.1 present. [ 2.007948] DMI: Qualcomm Qualcomm Centriq(TM) 2400 Development Platform/ABW|SYS|CVR,1DPC|V3 , BIOS STB_XBL.DF.2.0_-64-1-G1CA82A3-DIRT [ 2.021938] NET: Registered protocol family 16 [ 2.028242] cpuidle: using governor ladder [ 2.032767] cpuidle: using governor menu [ 2.037016] Detected 2 PCC Subspaces [ 2.040890] Registering PCC driver as Mailbox controller [ 2.046727] vdso: 2 pages (1 code @ ffff000008ad7000, 1 data @ ffff000009435000) [ 2.054642] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers. [ 2.063004] DMA: preallocated 256 KiB pool for atomic allocations [ 2.069562] ACPI: bus type PCI registered [ 2.073845] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.080801] Serial: AMBA PL011 UART driver [ 2.090733] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.099333] ipmi:dmi: Invalid IPMI type: 0 [ 2.099623] ACPI: Added _OSI(Module Device) [ 2.108477] ACPI: Added _OSI(Processor Device) [ 2.113221] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.118248] ACPI: Added _OSI(Processor Aggregator Device) [ 2.624538] ACPI: Interpreter enabled [ 2.628465] ACPI: Using GIC for interrupt routing [ 2.633524] ACPI: MCFG table detected, 3 entries [ 2.639208] HEST: Table parsing has been initialized. [ 2.754704] sbsa-uart ARMH0011:01: working around QDF2400 SoC erratum 44 [ 2.761904] ARMH0011:01: ttyAMA0 at MMIO 0xff78ed1000 (irq = 27, base_baud = 0) is a SBSA [ 2.770657] console [ttyAMA0] enabled [ 2.778217] bootconsole [pl11] disabled [ 2.807250] ACPI: PCI Interrupt Link [LN0A] (IRQs *88) [ 2.811494] ACPI: PCI Interrupt Link [LN0B] (IRQs *89) [ 2.816609] ACPI: PCI Interrupt Link [LN0C] (IRQs *90) [ 2.821730] ACPI: PCI Interrupt Link [LN0D] (IRQs *91) [ 2.827045] ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 00-ff]) [ 2.833001] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.841343] acpi PNP0A08:01: PCIe AER handled by firmware [ 2.846902] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.869335] acpi PNP0A08:01: ECAM area [mem 0x90000000000-0x9000fffffff] reserved by PNP0C02:01 [ 2.877110] acpi PNP0A08:01: ECAM at [mem 0x90000000000-0x9000fffffff] for [bus 00-ff] [ 2.885060] Remapped I/O 0x000009ffffff0000 to [io 0x0000-0xffff window] [ 2.891887] PCI host bridge to bus 0001:00 [ 2.895833] pci_bus 0001:00: root bus resource [mem 0x90100100000-0x9011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 2.907114] pci_bus 0001:00: root bus resource [mem 0x90200000000-0x9021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 2.918398] pci_bus 0001:00: root bus resource [mem 0x90300000000-0x9033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 2.929682] pci_bus 0001:00: root bus resource [mem 0x90400000000-0x9fffffeffff window] [ 2.937669] pci_bus 0001:00: root bus resource [io 0x0000-0xffff window] (bus address [0x1000-0x10fff]) [ 2.947131] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.952611] pci 0001:00:00.0: [17cb:0401] type 01 class 0x060400 [ 2.958645] pci 0001:00:00.0: PME# supported from D0 D3hot [ 2.964242] pci 0001:00:00.0: BAR 14: assigned [mem 0x90100100000-0x901002fffff] [ 2.971442] pci 0001:00:00.0: BAR 15: assigned [mem 0x90400000000-0x904001fffff 64bit pref] [ 2.979770] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.985933] pci 0001:00:00.0: PCI bridge to [bus 01] [ 2.990881] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.996957] pci 0001:00:00.0: bridge window [mem 0x90100100000-0x901002fffff] [ 3.004253] pci 0001:00:00.0: bridge window [mem 0x90400000000-0x904001fffff 64bit pref] [ 3.012500] pci 0001:00:00.0: Max Payload Size set to 512/ 512 (was 512), Max Read Rq 4096 [ 3.020979] ACPI: PCI Interrupt Link [LN1A] (IRQs *92) [ 3.026086] ACPI: PCI Interrupt Link [LN1B] (IRQs *93) [ 3.031205] ACPI: PCI Interrupt Link [LN1C] (IRQs *94) [ 3.036327] ACPI: PCI Interrupt Link [LN1D] (IRQs *95) [ 3.041636] ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-ff]) [ 3.047595] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.055939] acpi PNP0A08:02: PCIe AER handled by firmware [ 3.061495] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 3.084135] acpi PNP0A08:02: ECAM area [mem 0xa0000000000-0xa000fffffff] reserved by PNP0C02:02 [ 3.091905] acpi PNP0A08:02: ECAM at [mem 0xa0000000000-0xa000fffffff] for [bus 00-ff] [ 3.099850] Remapped I/O 0x00000affffff0000 to [io 0x10000-0x1ffff window] [ 3.106856] PCI host bridge to bus 0002:00 [ 3.110804] pci_bus 0002:00: root bus resource [mem 0xa0100100000-0xa011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 3.122086] pci_bus 0002:00: root bus resource [mem 0xa0200000000-0xa021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 3.133376] pci_bus 0002:00: root bus resource [mem 0xa0300000000-0xa033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 3.144655] pci_bus 0002:00: root bus resource [mem 0xa0400000000-0xafffffeffff window] [ 3.152641] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff window] (bus address [0x1000-0x10fff]) [ 3.162277] pci_bus 0002:00: root bus resource [bus 00-ff] [ 3.167755] pci 0002:00:00.0: [17cb:0401] type 01 class 0x060400 [ 3.173787] pci 0002:00:00.0: PME# supported from D0 D3hot [ 3.179383] pci 0002:01:00.0: [8086:105e] type 00 class 0x020000 [ 3.185219] pci 0002:01:00.0: reg 0x10: [mem 0xa0100100000-0xa010011ffff] [ 3.191971] pci 0002:01:00.0: reg 0x14: [mem 0xa0100120000-0xa010013ffff] [ 3.198742] pci 0002:01:00.0: reg 0x18: [io 0x10000-0x1001f] [ 3.204497] pci 0002:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 3.211217] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold [ 3.217345] pci 0002:01:00.1: [8086:105e] type 00 class 0x020000 [ 3.223238] pci 0002:01:00.1: reg 0x10: [mem 0xa0100160000-0xa010017ffff] [ 3.229992] pci 0002:01:00.1: reg 0x14: [mem 0xa0100180000-0xa010019ffff] [ 3.236763] pci 0002:01:00.1: reg 0x18: [io 0x10020-0x1003f] [ 3.242517] pci 0002:01:00.1: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 3.249236] pci 0002:01:00.1: PME# supported from D0 D3hot D3cold [ 3.255357] pci 0002:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 3.265256] pci 0002:00:00.0: BAR 14: assigned [mem 0xa0100100000-0xa01002fffff] [ 3.272609] pci 0002:00:00.0: BAR 15: assigned [mem 0xa0400000000-0xa04001fffff 64bit pref] [ 3.280940] pci 0002:00:00.0: BAR 13: assigned [io 0x10000-0x10fff] [ 3.287279] pci 0002:01:00.0: BAR 0: assigned [mem 0xa0100100000-0xa010011ffff] [ 3.294571] pci 0002:01:00.0: BAR 1: assigned [mem 0xa0100120000-0xa010013ffff] [ 3.301863] pci 0002:01:00.0: BAR 6: assigned [mem 0xa0100140000-0xa010015ffff pref] [ 3.309585] pci 0002:01:00.1: BAR 0: assigned [mem 0xa0100160000-0xa010017ffff] [ 3.316879] pci 0002:01:00.1: BAR 1: assigned [mem 0xa0100180000-0xa010019ffff] [ 3.324171] pci 0002:01:00.1: BAR 6: assigned [mem 0xa01001a0000-0xa01001bffff pref] [ 3.331894] pci 0002:01:00.0: BAR 2: assigned [io 0x10000-0x1001f] [ 3.338147] pci 0002:01:00.1: BAR 2: assigned [io 0x10020-0x1003f] [ 3.344398] pci 0002:00:00.0: PCI bridge to [bus 01] [ 3.349342] pci 0002:00:00.0: bridge window [io 0x10000-0x10fff] [ 3.355592] pci 0002:00:00.0: bridge window [mem 0xa0100100000-0xa01002fffff] [ 3.362884] pci 0002:00:00.0: bridge window [mem 0xa0400000000-0xa04001fffff 64bit pref] [ 3.371135] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 256), Max Read Rq 4096 [ 3.379557] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 4096 [ 3.387978] pci 0002:01:00.1: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 4096 [ 3.396460] ACPI: PCI Interrupt Link [LN2A] (IRQs *96) [ 3.401565] ACPI: PCI Interrupt Link [LN2B] (IRQs *97) [ 3.406682] ACPI: PCI Interrupt Link [LN2C] (IRQs *98) [ 3.411803] ACPI: PCI Interrupt Link [LN2D] (IRQs *99) [ 3.417117] ACPI: PCI Root Bridge [PCI3] (domain 0003 [bus 00-ff]) [ 3.423071] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.431412] acpi PNP0A08:03: PCIe AER handled by firmware [ 3.436971] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 3.460072] acpi PNP0A08:03: ECAM area [mem 0xc0000000000-0xc000fffffff] reserved by PNP0C02:03 [ 3.467842] acpi PNP0A08:03: ECAM at [mem 0xc0000000000-0xc000fffffff] for [bus 00-ff] [ 3.475788] Remapped I/O 0x00000cffffff0000 to [io 0x20000-0x2ffff window] [ 3.482806] PCI host bridge to bus 0003:00 [ 3.486742] pci_bus 0003:00: root bus resource [mem 0xc0100100000-0xc011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 3.498024] pci_bus 0003:00: root bus resource [mem 0xc0200000000-0xc021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 3.509309] pci_bus 0003:00: root bus resource [mem 0xc0300000000-0xc033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 3.520592] pci_bus 0003:00: root bus resource [mem 0xc0400000000-0xcfffffeffff window] [ 3.528584] pci_bus 0003:00: root bus resource [io 0x20000-0x2ffff window] (bus address [0x1000-0x10fff]) [ 3.538217] pci_bus 0003:00: root bus resource [bus 00-ff] [ 3.543693] pci 0003:00:00.0: [17cb:0401] type 01 class 0x060400 [ 3.549723] pci 0003:00:00.0: PME# supported from D0 D3hot [ 3.555354] pci 0003:01:00.0: [15b3:1015] type 00 class 0x020000 [ 3.561269] pci 0003:01:00.0: reg 0x10: [mem 0xc0400000000-0xc0401ffffff 64bit pref] [ 3.569069] pci 0003:01:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref] [ 3.575973] pci 0003:01:00.0: PME# supported from D3cold [ 3.581017] pci 0003:01:00.0: reg 0x1a4: [mem 0xc0402000000-0xc04020fffff 64bit pref] [ 3.588649] pci 0003:01:00.0: VF(n) BAR0 space: [mem 0xc0402000000-0xc04027fffff 64bit pref] (contains BAR0 for 8 VFs) [ 3.600033] pci 0003:00:00.0: BAR 15: assigned [mem 0xc0400000000-0xc0403ffffff 64bit pref] [ 3.607661] pci 0003:00:00.0: BAR 14: assigned [mem 0xc0100100000-0xc01002fffff] [ 3.615037] pci 0003:00:00.0: BAR 13: assigned [io 0x20000-0x20fff] [ 3.621376] pci 0003:01:00.0: BAR 0: assigned [mem 0xc0400000000-0xc0401ffffff 64bit pref] [ 3.629657] pci 0003:01:00.0: BAR 6: assigned [mem 0xc0100100000-0xc01001fffff pref] [ 3.637346] pci 0003:01:00.0: BAR 7: assigned [mem 0xc0402000000-0xc04027fffff 64bit pref] [ 3.645607] pci 0003:00:00.0: PCI bridge to [bus 01-02] [ 3.650800] pci 0003:00:00.0: bridge window [io 0x20000-0x20fff] [ 3.657055] pci 0003:00:00.0: bridge window [mem 0xc0100100000-0xc01002fffff] [ 3.664343] pci 0003:00:00.0: bridge window [mem 0xc0400000000-0xc0403ffffff 64bit pref] [ 3.672593] pci 0003:00:00.0: Max Payload Size set to 512/ 512 (was 512), Max Read Rq 4096 [ 3.681052] pci 0003:01:00.0: Max Payload Size set to 512/ 512 (was 512), Max Read Rq 4096 [ 3.689495] ACPI: PCI Interrupt Link [LN3A] (IRQs *100) [ 3.694688] ACPI: PCI Interrupt Link [LN3B] (IRQs *101) [ 3.699893] ACPI: PCI Interrupt Link [LN3C] (IRQs *102) [ 3.705101] ACPI: PCI Interrupt Link [LN3D] (IRQs *103) [ 3.710485] ACPI: PCI Interrupt Link [LN4A] (IRQs *104) [ 3.715521] ACPI: PCI Interrupt Link [LN4B] (IRQs *105) [ 3.720726] ACPI: PCI Interrupt Link [LN4C] (IRQs *106) [ 3.725940] ACPI: PCI Interrupt Link [LN4D] (IRQs *107) [ 3.731302] ACPI: PCI Interrupt Link [LN5A] (IRQs *108) [ 3.736354] ACPI: PCI Interrupt Link [LN5B] (IRQs *109) [ 3.741559] ACPI: PCI Interrupt Link [LN5C] (IRQs *110) [ 3.746766] ACPI: PCI Interrupt Link [LN5D] (IRQs *111) [ 3.785239] vgaarb: loaded [ 3.787508] SCSI subsystem initialized [ 3.790969] libata version 3.00 loaded. [ 3.794579] ACPI: bus type USB registered [ 3.798580] usbcore: registered new interface driver usbfs [ 3.804024] usbcore: registered new interface driver hub [ 3.809561] usbcore: registered new device driver usb [ 3.815003] EDAC MC: Ver: 3.0.0 [ 3.817679] Registered efivars operations [ 3.824334] NetLabel: Initializing [ 3.826790] NetLabel: domain hash size = 128 [ 3.831120] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.836789] NetLabel: unlabeled traffic allowed by default [ 3.843410] clocksource: Switched to clocksource arch_sys_counter [ 3.902601] VFS: Disk quotas dquot_6.6.0 [ 3.905676] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.912904] pnp: PnP ACPI init [ 3.931385] system 00:00: [mem 0x80000000000-0x8000fffffff] has been reserved [ 3.937596] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.944670] system 00:01: [mem 0x90000000000-0x9000fffffff] could not be reserved [ 3.951830] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.958924] system 00:02: [mem 0xa0000000000-0xa000fffffff] could not be reserved [ 3.966064] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.973152] system 00:03: [mem 0xc0000000000-0xc000fffffff] could not be reserved [ 3.980300] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.987411] system 00:04: [mem 0xd0000000000-0xd000fffffff] has been reserved [ 3.994188] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.001249] system 00:05: [mem 0xe0000000000-0xe000fffffff] has been reserved [ 4.008079] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.035226] pnp: PnP ACPI: found 6 devices [ 4.045479] NET: Registered protocol family 2 [ 4.050081] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 4.059463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.065663] TCP: Hash tables configured (established 524288 bind 65536) [ 4.072363] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 4.079391] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 4.086643] NET: Registered protocol family 1 [ 4.090169] PCI: CLS 64 bytes, default 128 [ 4.094270] Unpacking initramfs... [ 8.708699] Freeing initrd memory: 75272K [ 8.714754] qcom-pmu-extensions QCOM8150:00: PCC support detected [ 8.721846] hw perfevents: enabled with qcom_pmuv3_0 PMU driver, 9 counters available [ 8.729268] Enabled QCOM QOS feature, number of ids 240 [ 8.734433] qcom-qos QCOM8102:00: Property 'ccm_scale' not defined, set def scale 2560 [ 8.741845] qcom-qos QCOM8102:00: Registered QOS CCM PMU, type: 7 [ 8.748229] kvm [1]: 16-bit VMID [ 8.751114] kvm [1]: IDMAP page: 14c3000 [ 8.755033] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 8.762242] kvm [1]: GICv3: no GICV resource entry [ 8.766096] kvm [1]: disabling GICv2 emulation [ 8.770638] kvm [1]: GIC system register CPU interface enabled [ 8.777883] kvm [1]: vgic interrupt IRQ1 [ 8.780871] kvm [1]: virtual timer IRQ3 [ 8.786037] kvm [1]: Hyp mode initialized successfully [ 8.794036] audit: initializing netlink subsys (disabled) [ 8.798682] audit: type=2000 audit(8.188:1): state=initialized audit_enabled=0 res=1 [ 8.799250] Initialise system trusted keyrings [ 8.799274] Key type blacklist registered [ 8.799387] workingset: timestamp_bits=40 max_order=25 bucket_order=0 [ 8.804455] zbud: loaded [ 8.806592] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 8.807276] fuse init (API version 7.26) [ 8.814552] Key type asymmetric registered [ 8.814557] Asymmetric key parser 'x509' registered [ 8.814709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 8.814997] io scheduler noop registered [ 8.815000] io scheduler deadline registered [ 8.815238] io scheduler cfq registered (default) [ 8.864660] qcom-irq-combiner QCOM80B1:00: Initialized with [p=111,n=29,r=ffff000009c1d018] [ 8.872283] qcom-irq-combiner QCOM80B1:01: Initialized with [p=112,n=12,r=ffff000009c3d024] [ 8.880597] qcom-irq-combiner QCOM80B1:02: Initialized with [p=113,n=16,r=ffff000009c8d038] [ 8.888922] qcom-irq-combiner QCOM80B1:03: Initialized with [p=114,n=18,r=ffff000009cbd03c] [ 8.928346] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.939739] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.945215] ACPI: Thermal Zone [TZ0] (24 C) [ 8.949863] thermal LNXTHERM:01: registered as thermal_zone1 [ 8.955026] ACPI: Thermal Zone [TZ1] (23 C) [ 8.959641] thermal LNXTHERM:02: registered as thermal_zone2 [ 8.964835] ACPI: Thermal Zone [TZ2] (23 C) [ 8.969446] thermal LNXTHERM:03: registered as thermal_zone3 [ 8.974643] ACPI: Thermal Zone [TZ3] (23 C) [ 8.979263] thermal LNXTHERM:04: registered as thermal_zone4 [ 8.984451] ACPI: Thermal Zone [TZ4] (23 C) [ 8.989060] thermal LNXTHERM:05: registered as thermal_zone5 [ 8.994267] ACPI: Thermal Zone [TZ5] (23 C) [ 8.998860] thermal LNXTHERM:06: registered as thermal_zone6 [ 9.004070] ACPI: Thermal Zone [TZ6] (22 C) [ 9.008697] thermal LNXTHERM:07: registered as thermal_zone7 [ 9.013881] ACPI: Thermal Zone [TZ7] (22 C) [ 9.018481] thermal LNXTHERM:08: registered as thermal_zone8 [ 9.023688] ACPI: Thermal Zone [TZ8] (22 C) [ 9.028284] thermal LNXTHERM:09: registered as thermal_zone9 [ 9.033496] ACPI: Thermal Zone [TZ9] (22 C) [ 9.038105] thermal LNXTHERM:0a: registered as thermal_zone10 [ 9.043392] ACPI: Thermal Zone [TZ10] (22 C) [ 9.048081] thermal LNXTHERM:0d: registered as thermal_zone11 [ 9.053376] ACPI: Thermal Zone [TZ13] (23 C) [ 9.058084] thermal LNXTHERM:0e: registered as thermal_zone12 [ 9.063363] ACPI: Thermal Zone [TZ14] (23 C) [ 9.068045] thermal LNXTHERM:0f: registered as thermal_zone13 [ 9.073344] ACPI: Thermal Zone [TZ15] (24 C) [ 9.078033] thermal LNXTHERM:10: registered as thermal_zone14 [ 9.083326] ACPI: Thermal Zone [TZ16] (22 C) [ 9.088009] thermal LNXTHERM:11: registered as thermal_zone15 [ 9.093308] ACPI: Thermal Zone [TZ17] (22 C) [ 9.097992] thermal LNXTHERM:12: registered as thermal_zone16 [ 9.103291] ACPI: Thermal Zone [TZ18] (23 C) [ 9.107984] thermal LNXTHERM:13: registered as thermal_zone17 [ 9.113273] ACPI: Thermal Zone [TZ19] (24 C) [ 9.117962] thermal LNXTHERM:14: registered as thermal_zone18 [ 9.123263] ACPI: Thermal Zone [TZ20] (24 C) [ 9.127951] thermal LNXTHERM:15: registered as thermal_zone19 [ 9.133239] ACPI: Thermal Zone [TZ21] (23 C) [ 9.137940] thermal LNXTHERM:16: registered as thermal_zone20 [ 9.143222] ACPI: Thermal Zone [TZ22] (23 C) [ 9.147907] thermal LNXTHERM:17: registered as thermal_zone21 [ 9.153204] ACPI: Thermal Zone [TZ23] (24 C) [ 9.157899] thermal LNXTHERM:18: registered as thermal_zone22 [ 9.163187] ACPI: Thermal Zone [TZ24] (23 C) [ 9.167873] thermal LNXTHERM:19: registered as thermal_zone23 [ 9.173170] ACPI: Thermal Zone [TZ25] (23 C) [ 9.177860] thermal LNXTHERM:1a: registered as thermal_zone24 [ 9.183153] ACPI: Thermal Zone [TZ26] (23 C) [ 9.187849] thermal LNXTHERM:1b: registered as thermal_zone25 [ 9.193136] ACPI: Thermal Zone [TZ27] (23 C) [ 9.197826] thermal LNXTHERM:1c: registered as thermal_zone26 [ 9.203118] ACPI: Thermal Zone [TZ28] (24 C) [ 9.207805] thermal LNXTHERM:1d: registered as thermal_zone27 [ 9.213100] ACPI: Thermal Zone [TZ29] (23 C) [ 9.217838] thermal LNXTHERM:1e: registered as thermal_zone28 [ 9.223086] ACPI: Thermal Zone [TZ30] (23 C) [ 9.227767] thermal LNXTHERM:1f: registered as thermal_zone29 [ 9.233066] ACPI: Thermal Zone [TZ31] (23 C) [ 9.237751] thermal LNXTHERM:20: registered as thermal_zone30 [ 9.243048] ACPI: Thermal Zone [TZ32] (23 C) [ 9.247733] thermal LNXTHERM:21: registered as thermal_zone31 [ 9.253037] ACPI: Thermal Zone [TZ33] (23 C) [ 9.257713] thermal LNXTHERM:22: registered as thermal_zone32 [ 9.263013] ACPI: Thermal Zone [TZ34] (23 C) [ 9.267707] thermal LNXTHERM:23: registered as thermal_zone33 [ 9.272996] ACPI: Thermal Zone [TZ35] (23 C) [ 9.277683] thermal LNXTHERM:24: registered as thermal_zone34 [ 9.282978] ACPI: Thermal Zone [TZ36] (24 C) [ 9.287672] thermal LNXTHERM:25: registered as thermal_zone35 [ 9.292961] ACPI: Thermal Zone [TZ37] (24 C) [ 9.297652] thermal LNXTHERM:26: registered as thermal_zone36 [ 9.302944] ACPI: Thermal Zone [TZ38] (23 C) [ 9.307630] thermal LNXTHERM:27: registered as thermal_zone37 [ 9.312926] ACPI: Thermal Zone [TZ39] (24 C) [ 9.317610] thermal LNXTHERM:28: registered as thermal_zone38 [ 9.322909] ACPI: Thermal Zone [TZ40] (23 C) [ 9.327600] thermal LNXTHERM:29: registered as thermal_zone39 [ 9.332892] ACPI: Thermal Zone [TZ41] (23 C) [ 9.337587] thermal LNXTHERM:2a: registered as thermal_zone40 [ 9.342874] ACPI: Thermal Zone [TZ42] (24 C) [ 9.347564] thermal LNXTHERM:2b: registered as thermal_zone41 [ 9.352857] ACPI: Thermal Zone [TZ43] (24 C) [ 9.357541] thermal LNXTHERM:2c: registered as thermal_zone42 [ 9.362840] ACPI: Thermal Zone [TZ44] (24 C) [ 9.367529] thermal LNXTHERM:2d: registered as thermal_zone43 [ 9.372821] ACPI: Thermal Zone [TZ45] (24 C) [ 9.377522] thermal LNXTHERM:2e: registered as thermal_zone44 [ 9.382812] ACPI: Thermal Zone [TZ46] (24 C) [ 9.387504] thermal LNXTHERM:2f: registered as thermal_zone45 [ 9.392787] ACPI: Thermal Zone [TZ47] (24 C) [ 9.397470] thermal LNXTHERM:30: registered as thermal_zone46 [ 9.402770] ACPI: Thermal Zone [TZ48] (25 C) [ 9.407458] thermal LNXTHERM:31: registered as thermal_zone47 [ 9.412752] ACPI: Thermal Zone [TZ49] (30 C) [ 9.417426] thermal LNXTHERM:32: registered as thermal_zone48 [ 9.422735] ACPI: Thermal Zone [TZ50] (19 C) [ 9.427433] thermal LNXTHERM:33: registered as thermal_zone49 [ 9.432717] ACPI: Thermal Zone [TZ51] (26 C) [ 9.437389] thermal LNXTHERM:34: registered as thermal_zone50 [ 9.442700] ACPI: Thermal Zone [TZ52] (26 C) [ 9.447394] thermal LNXTHERM:35: registered as thermal_zone51 [ 9.452682] ACPI: Thermal Zone [TZ53] (24 C) [ 9.457369] thermal LNXTHERM:36: registered as thermal_zone52 [ 9.462666] ACPI: Thermal Zone [TZ54] (24 C) [ 9.467358] thermal LNXTHERM:37: registered as thermal_zone53 [ 9.472648] ACPI: Thermal Zone [TZ55] (24 C) [ 9.477320] thermal LNXTHERM:38: registered as thermal_zone54 [ 9.482631] ACPI: Thermal Zone [TZ56] (23 C) [ 9.487320] thermal LNXTHERM:39: registered as thermal_zone55 [ 9.492612] ACPI: Thermal Zone [TZ57] (24 C) [ 9.497289] thermal LNXTHERM:3a: registered as thermal_zone56 [ 9.502596] ACPI: Thermal Zone [TZ58] (24 C) [ 9.507637] ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports. [ 9.515708] ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly. [ 9.523857] ghes_edac: So, the end result of using this driver varies from vendor to vendor. [ 9.532277] ghes_edac: If you find incorrect reports, please contact your hardware vendor [ 9.540437] ghes_edac: to correct its BIOS. [ 9.544604] ghes_edac: This system has 6 DIMM sockets. [ 9.550223] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 9.559377] EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 9.568835] EDAC MC2: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 9.578299] EDAC MC3: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 9.587746] EDAC MC4: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 9.597423] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 9.604632] ACPI GTDT: found 1 SBSA generic Watchdog(s). [ 9.614805] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 9.629835] msm_serial: driver initialized [ 9.634836] arm-smmu-v3 arm-smmu-v3.0.auto: option mask 0x0 [ 9.639547] arm-smmu-v3 arm-smmu-v3.0.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 9.647561] arm-smmu-v3 arm-smmu-v3.0.auto: msi_domain absent - falling back to wired irqs [ 9.656370] arm-smmu-v3 arm-smmu-v3.1.auto: option mask 0x0 [ 9.661399] arm-smmu-v3 arm-smmu-v3.1.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 9.669435] arm-smmu-v3 arm-smmu-v3.1.auto: msi_domain absent - falling back to wired irqs [ 9.678000] arm-smmu-v3 arm-smmu-v3.2.auto: option mask 0x0 [ 9.683259] arm-smmu-v3 arm-smmu-v3.2.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 9.691305] arm-smmu-v3 arm-smmu-v3.2.auto: msi_domain absent - falling back to wired irqs [ 9.699835] arm-smmu-v3 arm-smmu-v3.3.auto: option mask 0x0 [ 9.705131] arm-smmu-v3 arm-smmu-v3.3.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 9.713181] arm-smmu-v3 arm-smmu-v3.3.auto: msi_domain absent - falling back to wired irqs [ 9.721724] arm-smmu-v3 arm-smmu-v3.4.auto: option mask 0x0 [ 9.727004] arm-smmu-v3 arm-smmu-v3.4.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 9.735064] arm-smmu-v3 arm-smmu-v3.4.auto: msi_domain absent - falling back to wired irqs [ 9.743713] arm-smmu-v3 arm-smmu-v3.5.auto: option mask 0x0 [ 9.748901] arm-smmu-v3 arm-smmu-v3.5.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 9.756932] arm-smmu-v3 arm-smmu-v3.5.auto: msi_domain absent - falling back to wired irqs [ 9.767177] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 9.788676] loop: module loaded [ 9.792431] mdio_bus fixed-0: GPIO lookup for consumer reset [ 9.797156] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 9.803220] mdio_bus fixed-0: lookup for GPIO reset failed [ 9.808710] libphy: Fixed MDIO Bus: probed [ 9.812766] tun: Universal TUN/TAP device driver, 1.6 [ 9.819194] PPP generic driver version 2.4.2 [ 9.822914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.829045] ehci-pci: EHCI PCI platform driver [ 9.833495] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.839620] ohci-pci: OHCI PCI platform driver [ 9.844076] uhci_hcd: USB Universal Host Controller Interface driver [ 9.850813] mousedev: PS/2 mouse device common for all mice [ 9.856995] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 9.862767] i2c /dev entries driver [ 9.867405] device-mapper: uevent: version 1.0.3 [ 9.871504] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 9.884553] ledtrig-cpu: registered to indicate activity on CPUs [ 9.889901] EFI Variables Facility v0.08 2004-May-17 [ 9.899431] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 0 [ 9.905475] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 1 [ 9.912422] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 2 [ 9.919362] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 3 [ 9.926301] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 4 [ 9.933249] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 5 [ 9.940190] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 6 [ 9.947148] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 7 [ 9.954077] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 8 [ 9.961022] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 9 [ 9.967971] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 10 [ 9.974999] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 11 [ 9.982029] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 12 [ 9.989064] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 13 [ 9.996092] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 14 [ 10.003123] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 15 [ 10.010160] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 16 [ 10.017185] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 17 [ 10.024216] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 18 [ 10.031253] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 19 [ 10.038280] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 20 [ 10.045319] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 21 [ 10.052342] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 22 [ 10.059377] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 23 [ 10.066456] qcom-l2cache-pmu QCOM8130:00: CPU0 associated with cluster 0 [ 10.073202] qcom-l2cache-pmu QCOM8130:00: CPU1 associated with cluster 1 [ 10.079866] qcom-l2cache-pmu QCOM8130:00: CPU2 associated with cluster 2 [ 10.086570] qcom-l2cache-pmu QCOM8130:00: CPU3 associated with cluster 3 [ 10.093299] qcom-l2cache-pmu QCOM8130:00: CPU4 associated with cluster 4 [ 10.100003] qcom-l2cache-pmu QCOM8130:00: CPU5 associated with cluster 5 [ 10.106694] qcom-l2cache-pmu QCOM8130:00: CPU6 associated with cluster 7 [ 10.113345] qcom-l2cache-pmu QCOM8130:00: CPU7 associated with cluster 8 [ 10.120056] qcom-l2cache-pmu QCOM8130:00: CPU8 associated with cluster 9 [ 10.126756] qcom-l2cache-pmu QCOM8130:00: CPU9 associated with cluster 10 [ 10.133489] qcom-l2cache-pmu QCOM8130:00: CPU10 associated with cluster 11 [ 10.140331] qcom-l2cache-pmu QCOM8130:00: CPU11 associated with cluster 12 [ 10.147191] qcom-l2cache-pmu QCOM8130:00: CPU12 associated with cluster 13 [ 10.154046] qcom-l2cache-pmu QCOM8130:00: CPU13 associated with cluster 14 [ 10.160906] qcom-l2cache-pmu QCOM8130:00: CPU14 associated with cluster 15 [ 10.167793] qcom-l2cache-pmu QCOM8130:00: CPU15 associated with cluster 16 [ 10.174666] qcom-l2cache-pmu QCOM8130:00: CPU16 associated with cluster 17 [ 10.181526] qcom-l2cache-pmu QCOM8130:00: CPU17 associated with cluster 18 [ 10.188378] qcom-l2cache-pmu QCOM8130:00: CPU18 associated with cluster 19 [ 10.195199] qcom-l2cache-pmu QCOM8130:00: CPU19 associated with cluster 20 [ 10.201997] qcom-l2cache-pmu QCOM8130:00: CPU20 associated with cluster 21 [ 10.208960] qcom-l2cache-pmu QCOM8130:00: CPU21 associated with cluster 22 [ 10.215813] qcom-l2cache-pmu QCOM8130:00: CPU22 associated with cluster 23 [ 10.222649] qcom-l2cache-pmu QCOM8130:00: CPU23 associated with cluster 0 [ 10.229421] qcom-l2cache-pmu QCOM8130:00: CPU24 associated with cluster 1 [ 10.236133] qcom-l2cache-pmu QCOM8130:00: CPU25 associated with cluster 2 [ 10.242954] qcom-l2cache-pmu QCOM8130:00: CPU26 associated with cluster 3 [ 10.249675] qcom-l2cache-pmu QCOM8130:00: CPU27 associated with cluster 4 [ 10.256501] qcom-l2cache-pmu QCOM8130:00: CPU28 associated with cluster 6 [ 10.263296] qcom-l2cache-pmu QCOM8130:00: CPU29 associated with cluster 7 [ 10.269987] qcom-l2cache-pmu QCOM8130:00: CPU30 associated with cluster 8 [ 10.276814] qcom-l2cache-pmu QCOM8130:00: CPU31 associated with cluster 9 [ 10.283609] qcom-l2cache-pmu QCOM8130:00: CPU32 associated with cluster 10 [ 10.290391] qcom-l2cache-pmu QCOM8130:00: CPU33 associated with cluster 11 [ 10.297225] qcom-l2cache-pmu QCOM8130:00: CPU34 associated with cluster 12 [ 10.304083] qcom-l2cache-pmu QCOM8130:00: CPU35 associated with cluster 13 [ 10.310941] qcom-l2cache-pmu QCOM8130:00: CPU36 associated with cluster 14 [ 10.317800] qcom-l2cache-pmu QCOM8130:00: CPU37 associated with cluster 15 [ 10.324724] qcom-l2cache-pmu QCOM8130:00: CPU38 associated with cluster 16 [ 10.331611] qcom-l2cache-pmu QCOM8130:00: CPU39 associated with cluster 17 [ 10.338461] qcom-l2cache-pmu QCOM8130:00: CPU40 associated with cluster 18 [ 10.345314] qcom-l2cache-pmu QCOM8130:00: CPU41 associated with cluster 19 [ 10.352134] qcom-l2cache-pmu QCOM8130:00: CPU42 associated with cluster 20 [ 10.358998] qcom-l2cache-pmu QCOM8130:00: CPU43 associated with cluster 21 [ 10.365889] qcom-l2cache-pmu QCOM8130:00: CPU44 associated with cluster 22 [ 10.372743] qcom-l2cache-pmu QCOM8130:00: CPU45 associated with cluster 23 [ 10.379672] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU using 24 HW PMUs [ 10.392535] qcom-l3cache-pmu QCOM8081:00: Registered l3cache_0_0, type: 9 [ 10.403095] qcom-l3cache-pmu QCOM8081:01: Registered l3cache_0_1, type: 10 [ 10.413648] qcom-l3cache-pmu QCOM8081:02: Registered l3cache_0_2, type: 11 [ 10.424228] qcom-l3cache-pmu QCOM8081:03: Registered l3cache_0_3, type: 12 [ 10.434802] qcom-l3cache-pmu QCOM8081:04: Registered l3cache_0_4, type: 13 [ 10.445331] qcom-l3cache-pmu QCOM8081:05: Registered l3cache_0_5, type: 14 [ 10.455867] qcom-l3cache-pmu QCOM8081:06: Registered l3cache_0_6, type: 15 [ 10.466408] qcom-l3cache-pmu QCOM8081:07: Registered l3cache_0_7, type: 16 [ 10.476960] qcom-l3cache-pmu QCOM8081:08: Registered l3cache_0_8, type: 17 [ 10.487826] qcom-l3cache-pmu QCOM8081:09: Registered l3cache_0_9, type: 18 [ 10.498449] qcom-l3cache-pmu QCOM8081:0a: Registered l3cache_0_10, type: 19 [ 10.509101] qcom-l3cache-pmu QCOM8081:0b: Registered l3cache_0_11, type: 20 [ 10.516378] NET: Registered protocol family 10 [ 10.546622] Segment Routing with IPv6 [ 10.549418] NET: Registered protocol family 17 [ 10.554083] Key type dns_resolver registered [ 10.559421] registered taskstats version 1 [ 10.562588] Loading compiled-in X.509 certificates [ 10.581112] Loaded X.509 cert 'Build time autogenerated kernel key: ea7718ec66a9224983a1a9a6eb5015ebf4889903' [ 10.590300] zswap: loaded using pool lzo/zbud [ 10.595082] Debug warning: early ioremap leak of 1 areas detected. please boot with early_ioremap_debug and report the dmesg. [ 10.607104] ------------[ cut here ]------------ [ 10.611695] WARNING: CPU: 19 PID: 1 at mm/early_ioremap.c:99 check_early_ioremap_leak+0x4c/0x60 [ 10.620364] Modules linked in: [ 10.623407] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 4.14.14 #1 [ 10.629480] Hardware name: Qualcomm Qualcomm Centriq(TM) 2400 Development Platform/ABW|SYS|CVR,1DPC|V3 , BIOS STB_XBL.DF.2.0_-64-1-G1CA82A3-DIRT [ 10.643282] task: ffff80179811c000 task.stack: ffff801798118000 [ 10.649186] PC is at check_early_ioremap_leak+0x4c/0x60 [ 10.654394] LR is at check_early_ioremap_leak+0x4c/0x60 [ 10.659602] pc : [] lr : [] pstate: 60400005 [ 10.666979] sp : ffff80179811bda0 [ 10.670278] x29: ffff80179811bda0 x28: 0000000000000000 [ 10.675572] x27: ffff00000903fb90 x26: ffff0000095c4000 [ 10.680867] x25: ffff000008f00400 x24: ffff000008fc3070 [ 10.686163] x23: ffff000008ef0028 x22: 0000000000000000 [ 10.691458] x21: 0000000000000007 x20: ffff000008f2933c [ 10.696753] x19: ffff000009439000 x18: ffffffffffffffff [ 10.702048] x17: 0000000000000000 x16: 0000000000000000 [ 10.707343] x15: ffff000009439c08 x14: ffff0000895e50fd [ 10.712638] x13: ffff0000095e510b x12: 2e64657463657465 [ 10.717934] x11: 0000000000000000 x10: 0000000005f5e0ff [ 10.723229] x9 : 0000000000000090 x8 : ffff00000943a658 [ 10.728524] x7 : 6f70657220646e61 x6 : 00000000000003c1 [ 10.733819] x5 : ffff801798118000 x4 : 0000000000000000 [ 10.739114] x3 : 0000000000000000 x2 : 0d96b4630bc96f00 [ 10.744409] x1 : 0000000000000000 x0 : 0000000000000071 [ 10.749705] Call trace: [ 10.752138] Exception stack(0xffff80179811bc60 to 0xffff80179811bda0) [ 10.758563] bc60: 0000000000000071 0000000000000000 0d96b4630bc96f00 0000000000000000 [ 10.766374] bc80: 0000000000000000 ffff801798118000 00000000000003c1 6f70657220646e61 [ 10.774186] bca0: ffff00000943a658 0000000000000090 0000000005f5e0ff 0000000000000000 [ 10.781999] bcc0: 2e64657463657465 ffff0000095e510b ffff0000895e50fd ffff000009439c08 [ 10.789811] bce0: 0000000000000000 0000000000000000 ffffffffffffffff ffff000009439000 [ 10.797624] bd00: ffff000008f2933c 0000000000000007 0000000000000000 ffff000008ef0028 [ 10.805436] bd20: ffff000008fc3070 ffff000008f00400 ffff0000095c4000 ffff00000903fb90 [ 10.813249] bd40: 0000000000000000 ffff80179811bda0 ffff000008f29388 ffff80179811bda0 [ 10.821061] bd60: ffff000008f29388 0000000060400005 0000000000000038 0000000000000000 [ 10.828874] bd80: ffffffffffffffff 0000000000000000 ffff80179811bda0 ffff000008f29388 [ 10.836686] [] check_early_ioremap_leak+0x4c/0x60 [ 10.842940] [] do_one_initcall+0x64/0x188 [ 10.848497] [] kernel_init_freeable+0x1a8/0x248 [ 10.854574] [] kernel_init+0x18/0x110 [ 10.859777] [] ret_from_fork+0x10/0x1c [ 10.865070] ---[ end trace 8c88f78bc5207e74 ]--- [ 10.884011] aes_arm64: module verification failed: signature and/or required key missing - tainting kernel [ 10.912683] Key type big_key registered [ 10.915609] Key type trusted registered [ 10.933672] Key type encrypted registered [ 10.936763] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 10.943074] evm: HMAC attrs: 0x1 [ 10.946760] iommu: Adding device 0001:00:00.0 to group 0 [ 10.952114] PCI Interrupt Link [LN1A] enabled at IRQ 92 [ 10.957033] pcieport 0001:00:00.0: Signaling PME with IRQ 134 [ 10.962544] pciehp 0001:00:00.0:pcie004: Slot #1 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock+ NoCompl- LLActRep+ [ 10.975280] iommu: Adding device 0002:00:00.0 to group 1 [ 10.980628] PCI Interrupt Link [LN2A] enabled at IRQ 96 [ 10.985555] pcieport 0002:00:00.0: Signaling PME with IRQ 136 [ 10.991100] pciehp 0002:00:00.0:pcie004: Slot #2 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock+ NoCompl- LLActRep+ [ 11.003806] iommu: Adding device 0003:00:00.0 to group 2 [ 11.009203] PCI Interrupt Link [LN3A] enabled at IRQ 100 [ 11.014188] pcieport 0003:00:00.0: Signaling PME with IRQ 138 [ 11.019740] pciehp 0003:00:00.0:pcie004: Slot #4 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock+ NoCompl- LLActRep+ [ 11.032650] rtc-efi rtc-efi: setting system clock to 2018-03-01 17:51:25 UTC (1519926685) [ 11.043771] Freeing unused kernel memory: 5312K [ 11.049342] Checked W+X mappings: passed, no W+X pages found [ 11.514530] gpio gpiochip0: (QCOM8002:00): added GPIO chardev (254:0) [ 11.515377] sdhci: Secure Digital Host Controller Interface driver [ 11.515378] sdhci: Copyright(c) Pierre Ossman [ 11.530539] gpiochip_setup_dev: registered GPIOs 0 to 149 on device: gpiochip0 (QCOM8002:00) [ 11.536470] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.545621] gpio gpiochip0: (QCOM8002:00): created GPIO range 0->149 ==> QCOM8002:00 PIN 0->149 [ 11.554448] i2c_qup QCOM8010:00: tx channel not available [ 11.554462] pps_core: LinuxPPS API ver. 1 registered [ 11.554463] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 11.555201] PTP clock support registered [ 11.558782] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 11.558782] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 11.558821] pcieport 0002:00:00.0: Using QCOM ACS Quirk (1) [ 11.558856] iommu: Adding device 0002:01:00.0 to group 3 [ 11.559156] e1000e 0002:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.559158] e1000e 0002:01:00.0: Interrupt Mode set to 1 [ 11.565806] pcieport 0003:00:00.0: Using QCOM ACS Quirk (1) [ 11.565825] iommu: Adding device 0003:01:00.0 to group 4 [ 11.566120] mlx5_core 0003:01:00.0: firmware version: 14.14.1100 [ 11.642925] i2c_qup QCOM8010:01: tx channel not available [ 11.659031] hidma-mgmt QCOM8060:00: HW rev: 1.1 @ 0x000000ff98000000 with 6 physical channels [ 11.666681] hidma-mgmt QCOM8060:01: HW rev: 1.1 @ 0x000000ff9a000000 with 6 physical channels [ 11.675898] mdio_bus QCOM8070:00: GPIO lookup for consumer reset [ 11.677104] ipmi message handler version 39.2 [ 11.677687] ipmi device interface [ 11.679109] IPMI System Interface driver. [ 11.679126] ipmi_si: probing via SPMI [ 11.679157] ipmi_si: Unable to find any System Interface(s) [ 11.701924] mdio_bus QCOM8070:00: using lookup tables for GPIO lookup [ 11.708348] mdio_bus QCOM8070:00: lookup for GPIO reset failed [ 11.716599] IPMI SSIF Interface driver [ 11.717364] libphy: emac-mdio: probed [ 11.717682] qcom-emac QCOM8070:00 eth0: hardware id 64.1, hardware version 1.3.0 [ 11.717809] ahci QCOM8090:00: SSS flag set, parallel bus scan disabled [ 11.717820] ahci QCOM8090:00: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.717822] ahci QCOM8090:00: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.718112] scsi host0: ahci [ 11.718173] ata1: SATA max UDMA/133 mmio [mem 0xff88000000-0xff880001ff] port 0x100 irq 28 [ 11.718252] ahci QCOM8090:01: SSS flag set, parallel bus scan disabled [ 11.718260] ahci QCOM8090:01: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.718262] ahci QCOM8090:01: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.718530] scsi host1: ahci [ 11.718593] ata2: SATA max UDMA/133 mmio [mem 0xff89000000-0xff890001ff] port 0x100 irq 29 [ 11.718686] xhci-hcd QCOM8041:00: xHCI Host Controller [ 11.718693] xhci-hcd QCOM8041:00: new USB bus registered, assigned bus number 1 [ 11.718839] xhci-hcd QCOM8041:00: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 11.718853] xhci-hcd QCOM8041:00: irq 115, io mem 0xff79800000 [ 11.718904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.718905] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.718907] usb usb1: Product: xHCI Host Controller [ 11.718908] usb usb1: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.718909] usb usb1: SerialNumber: QCOM8041:00 [ 11.719053] hub 1-0:1.0: USB hub found [ 11.719061] hub 1-0:1.0: 1 port detected [ 11.719160] xhci-hcd QCOM8041:00: xHCI Host Controller [ 11.719163] xhci-hcd QCOM8041:00: new USB bus registered, assigned bus number 2 [ 11.719182] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.719205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.719206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.719207] usb usb2: Product: xHCI Host Controller [ 11.719208] usb usb2: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.719209] usb usb2: SerialNumber: QCOM8041:00 [ 11.719343] hub 2-0:1.0: USB hub found [ 11.719352] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 11.719462] xhci-hcd QCOM8041:01: xHCI Host Controller [ 11.719466] xhci-hcd QCOM8041:01: new USB bus registered, assigned bus number 3 [ 11.719606] xhci-hcd QCOM8041:01: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 11.719618] xhci-hcd QCOM8041:01: irq 116, io mem 0xff79a00000 [ 11.719659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.719661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.719662] usb usb3: Product: xHCI Host Controller [ 11.719663] usb usb3: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.719664] usb usb3: SerialNumber: QCOM8041:01 [ 11.719801] hub 3-0:1.0: USB hub found [ 11.719808] hub 3-0:1.0: 1 port detected [ 11.719887] xhci-hcd QCOM8041:01: xHCI Host Controller [ 11.719890] xhci-hcd QCOM8041:01: new USB bus registered, assigned bus number 4 [ 11.719907] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.719929] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.719931] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.719932] usb usb4: Product: xHCI Host Controller [ 11.719933] usb usb4: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.719934] usb usb4: SerialNumber: QCOM8041:01 [ 11.720046] hub 4-0:1.0: USB hub found [ 11.720052] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 11.720606] mmc0: SDHCI controller on ACPI [QCOM8051:00] using PIO [ 11.720985] hidma QCOM8062:00: HI-DMA engine driver registration complete [ 11.721292] hidma QCOM8062:01: HI-DMA engine driver registration complete [ 11.721393] hidma-mgmt QCOM8060:02: HW rev: 1.1 @ 0x000000ff9c000000 with 6 physical channels [ 11.721473] hidma-mgmt QCOM8060:03: HW rev: 1.1 @ 0x000000ff9e000000 with 6 physical channels [ 11.721665] ahci QCOM8090:02: SSS flag set, parallel bus scan disabled [ 11.721674] ahci QCOM8090:02: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.721676] ahci QCOM8090:02: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.721947] scsi host2: ahci [ 11.722003] ata3: SATA max UDMA/133 mmio [mem 0xff8a000000-0xff8a0001ff] port 0x100 irq 30 [ 11.722103] ahci QCOM8090:03: SSS flag set, parallel bus scan disabled [ 11.722111] ahci QCOM8090:03: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.722113] ahci QCOM8090:03: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.722358] scsi host3: ahci [ 11.722423] ata4: SATA max UDMA/133 mmio [mem 0xff8b000000-0xff8b0001ff] port 0x100 irq 31 [ 11.722513] xhci-hcd QCOM8041:02: xHCI Host Controller [ 11.722518] xhci-hcd QCOM8041:02: new USB bus registered, assigned bus number 5 [ 11.722660] xhci-hcd QCOM8041:02: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 11.722672] xhci-hcd QCOM8041:02: irq 117, io mem 0xff79c00000 [ 11.722714] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.722716] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.722717] usb usb5: Product: xHCI Host Controller [ 11.722718] usb usb5: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.722719] usb usb5: SerialNumber: QCOM8041:02 [ 11.722865] hub 5-0:1.0: USB hub found [ 11.722873] hub 5-0:1.0: 1 port detected [ 11.722957] xhci-hcd QCOM8041:02: xHCI Host Controller [ 11.722960] xhci-hcd QCOM8041:02: new USB bus registered, assigned bus number 6 [ 11.722976] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.722998] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.723000] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.723001] usb usb6: Product: xHCI Host Controller [ 11.723002] usb usb6: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.723003] usb usb6: SerialNumber: QCOM8041:02 [ 11.723117] hub 6-0:1.0: USB hub found [ 11.723123] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 11.723241] xhci-hcd QCOM8041:03: xHCI Host Controller [ 11.723245] xhci-hcd QCOM8041:03: new USB bus registered, assigned bus number 7 [ 11.723386] xhci-hcd QCOM8041:03: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 11.723398] xhci-hcd QCOM8041:03: irq 118, io mem 0xff79e00000 [ 11.723437] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.723438] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.723439] usb usb7: Product: xHCI Host Controller [ 11.723440] usb usb7: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.723441] usb usb7: SerialNumber: QCOM8041:03 [ 11.723576] hub 7-0:1.0: USB hub found [ 11.723584] hub 7-0:1.0: 1 port detected [ 11.723665] xhci-hcd QCOM8041:03: xHCI Host Controller [ 11.723668] xhci-hcd QCOM8041:03: new USB bus registered, assigned bus number 8 [ 11.723684] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.723706] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.723707] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.723708] usb usb8: Product: xHCI Host Controller [ 11.723709] usb usb8: Manufacturer: Linux 4.14.14 xhci-hcd [ 11.723710] usb usb8: SerialNumber: QCOM8041:03 [ 11.723842] hub 8-0:1.0: USB hub found [ 11.723849] hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 11.724320] hidma QCOM8062:02: HI-DMA engine driver registration complete [ 11.725194] hidma QCOM8062:03: HI-DMA engine driver registration complete [ 11.725302] ahci QCOM8090:04: SSS flag set, parallel bus scan disabled [ 11.725311] ahci QCOM8090:04: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.725313] ahci QCOM8090:04: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.725837] scsi host4: ahci [ 11.725984] ata5: SATA max UDMA/133 mmio [mem 0xff8c000000-0xff8c0001ff] port 0x100 irq 32 [ 11.726068] ahci QCOM8090:05: SSS flag set, parallel bus scan disabled [ 11.726076] ahci QCOM8090:05: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.726078] ahci QCOM8090:05: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.726364] scsi host5: ahci [ 11.726431] ata6: SATA max UDMA/133 mmio [mem 0xff8d000000-0xff8d0001ff] port 0x100 irq 33 [ 11.726755] hidma QCOM8062:04: HI-DMA engine driver registration complete [ 11.727038] hidma QCOM8062:05: HI-DMA engine driver registration complete [ 11.727170] ahci QCOM8090:06: SSS flag set, parallel bus scan disabled [ 11.727179] ahci QCOM8090:06: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.727181] ahci QCOM8090:06: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.727458] scsi host6: ahci [ 11.727520] ata7: SATA max UDMA/133 mmio [mem 0xff8e000000-0xff8e0001ff] port 0x100 irq 34 [ 11.727602] ahci QCOM8090:07: SSS flag set, parallel bus scan disabled [ 11.727610] ahci QCOM8090:07: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.727612] ahci QCOM8090:07: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 11.727838] scsi host7: ahci [ 11.727892] ata8: SATA max UDMA/133 mmio [mem 0xff8f000000-0xff8f0001ff] port 0x100 irq 35 [ 11.728217] hidma QCOM8062:06: HI-DMA engine driver registration complete [ 11.728520] hidma QCOM8062:07: HI-DMA engine driver registration complete [ 11.728801] hidma QCOM8062:08: HI-DMA engine driver registration complete [ 11.729077] hidma QCOM8062:09: HI-DMA engine driver registration complete [ 11.729356] hidma QCOM8062:0a: HI-DMA engine driver registration complete [ 11.729634] hidma QCOM8062:0b: HI-DMA engine driver registration complete [ 11.729918] hidma QCOM8062:0c: HI-DMA engine driver registration complete [ 11.730203] hidma QCOM8062:0d: HI-DMA engine driver registration complete [ 11.730489] hidma QCOM8062:0e: HI-DMA engine driver registration complete [ 11.730777] hidma QCOM8062:0f: HI-DMA engine driver registration complete [ 11.731063] hidma QCOM8062:10: HI-DMA engine driver registration complete [ 11.731371] hidma QCOM8062:11: HI-DMA engine driver registration complete [ 11.731791] hidma QCOM8062:12: HI-DMA engine driver registration complete [ 11.732197] hidma QCOM8062:13: HI-DMA engine driver registration complete [ 11.732608] hidma QCOM8062:14: HI-DMA engine driver registration complete [ 11.733025] hidma QCOM8062:15: HI-DMA engine driver registration complete [ 11.733438] hidma QCOM8062:16: HI-DMA engine driver registration complete [ 11.733851] hidma QCOM8062:17: HI-DMA engine driver registration complete [ 11.739653] e1000e 0002:01:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:1b:21:bd:07:f0 [ 11.739654] e1000e 0002:01:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 11.739736] e1000e 0002:01:00.0 eth1: MAC: 0, PHY: 4, PBA No: D50868-006 [ 11.739776] pcieport 0002:00:00.0: Using QCOM ACS Quirk (1) [ 11.739798] iommu: Adding device 0002:01:00.1 to group 5 [ 11.739966] PCI Interrupt Link [LN2B] enabled at IRQ 97 [ 11.740050] e1000e 0002:01:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.824862] mmc0: new high speed SDHC card at address aaaa [ 11.825125] mmcblk0: mmc0:aaaa SE32G 29.7 GiB [ 11.826156] mmcblk0: p1 [ 11.915638] e1000e 0002:01:00.1 eth2: (PCI Express:2.5GT/s:Width x4) 00:1b:21:bd:07:f1 [ 11.915639] e1000e 0002:01:00.1 eth2: Intel(R) PRO/1000 Network Connection [ 11.915721] e1000e 0002:01:00.1 eth2: MAC: 0, PHY: 4, PBA No: D50868-006 [ 12.032779] ata3: SATA link down (SStatus 0 SControl 300) [ 12.041859] ata5: SATA link down (SStatus 0 SControl 300) [ 12.041862] ata7: SATA link down (SStatus 0 SControl 300) [ 12.041865] ata6: SATA link down (SStatus 0 SControl 300) [ 12.041884] ata4: SATA link down (SStatus 0 SControl 300) [ 12.042121] ata8: SATA link down (SStatus 0 SControl 300) [ 12.071207] usb 7-1: new high-speed USB device number 2 using xhci-hcd [ 12.071212] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 12.155288] (0003:01:00.0): E-Switch: Total vports 9, per vport: max uc(1024) max mc(16384) [ 12.171704] mlx5_core 0003:01:00.0: Port module event: module 0, Cable plugged [ 12.184103] mlx5_core 0003:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) [ 12.195213] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 12.195216] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 12.195380] ata1.00: ATA-9: Samsung SSD 845DC EVO 240GB, EXT03X3Q, max UDMA/133 [ 12.195381] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 12.195549] ata1.00: configured for UDMA/133 [ 12.195566] ata2.00: ATA-9: MICRON_M510DC_MTFDDAK240MBP, 0013, max UDMA/133 [ 12.195567] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 12.195745] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 845D 3X3Q PQ: 0 ANSI: 5 [ 12.195953] ata1.00: Enabling discard_zeroes_data [ 12.195995] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 12.196003] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.196005] sd 0:0:0:0: [sda] Write Protect is off [ 12.196007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.196019] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.196148] ata1.00: Enabling discard_zeroes_data [ 12.197568] sda: sda1 sda2 [ 12.197849] ata1.00: Enabling discard_zeroes_data [ 12.197925] sd 0:0:0:0: [sda] Attached SCSI disk [ 12.207518] ata2.00: configured for UDMA/133 [ 12.207683] scsi 1:0:0:0: Direct-Access ATA MICRON_M510DC_MT 0013 PQ: 0 ANSI: 5 [ 12.207916] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 12.207918] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 12.207925] sd 1:0:0:0: [sdb] Write Protect is off [ 12.207927] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 12.207933] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 12.207939] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.209283] sdb: sdb1 sdb2 [ 12.209600] sd 1:0:0:0: [sdb] Attached SCSI disk [ 12.219353] usb 5-1: New USB device found, idVendor=0424, idProduct=2514 [ 12.219355] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.219794] usb 7-1: New USB device found, idVendor=0624, idProduct=0249 [ 12.219796] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.219798] usb 7-1: Product: USB Composite Device-1 [ 12.219799] usb 7-1: Manufacturer: Avocent [ 12.219800] usb 7-1: SerialNumber: 20120430-1 [ 12.235079] hub 5-1:1.0: USB hub found [ 12.235206] hub 5-1:1.0: 4 ports detected [ 12.236952] usb-storage 7-1:1.0: USB Mass Storage device detected [ 12.237228] scsi host8: usb-storage 7-1:1.0 [ 12.237310] usbcore: registered new interface driver usb-storage [ 12.237870] usbcore: registered new interface driver uas [ 12.295366] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 [ 12.563149] usb 5-1.1: new full-speed USB device number 3 using xhci-hcd [ 12.664078] usb 5-1.1: New USB device found, idVendor=0624, idProduct=0248 [ 12.664080] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.664081] usb 5-1.1: Product: USB Composite Device-0 [ 12.664082] usb 5-1.1: Manufacturer: Avocent [ 12.664083] usb 5-1.1: SerialNumber: 20120430 [ 12.752365] hidraw: raw HID events driver (C) Jiri Kosina [ 12.846728] usbcore: registered new interface driver usbhid [ 12.846729] usbhid: USB HID core driver [ 12.847736] input: Avocent USB Composite Device-0 as /devices/platform/QCOM8041:02/usb5/5-1/5-1.1/5-1.1:1.0/0003:0624:0248.0001/input/input0 [ 12.911460] hid-generic 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-QCOM8041:02-1.1/input0 [ 12.911558] input: Avocent USB Composite Device-0 as /devices/platform/QCOM8041:02/usb5/5-1/5-1.1/5-1.1:1.1/0003:0624:0248.0002/input/input1 [ 12.911788] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-QCOM8041:02-1.1/input1 [ 12.911883] input: Avocent USB Composite Device-0 as /devices/platform/QCOM8041:02/usb5/5-1/5-1.1/5-1.1:1.2/0003:0624:0248.0003/input/input2 [ 12.912026] hid-generic 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-QCOM8041:02-1.1/input2 [ 12.990663] usb 5-1.2: new full-speed USB device number 4 using xhci-hcd [ 13.201717] usb 5-1.2: New USB device found, idVendor=05c6, idProduct=9302 [ 13.201719] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=128 [ 13.201721] usb 5-1.2: Product: Embedded Power Measurement (EPM) device [ 13.201722] usb 5-1.2: Manufacturer: QUALCOMM Inc. [ 13.201723] usb 5-1.2: SerialNumber: 070E0AF902165400 [ 13.230009] cdc_acm 5-1.2:1.1: ttyACM0: USB ACM device [ 13.230307] usbcore: registered new interface driver cdc_acm [ 13.230308] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 13.255745] scsi 8:0:0:0: CD-ROM MP EMS Virtual Media 0399 PQ: 0 ANSI: 0 [ 13.256032] scsi 8:0:0:1: Direct-Access MP EMS Virtual Media 0399 PQ: 0 ANSI: 0 CCS [ 13.256298] scsi 8:0:0:2: Direct-Access MP EMS Virtual Media 0399 PQ: 0 ANSI: 0 CCS [ 13.257350] sr 8:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw caddy [ 13.257352] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 13.257532] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 13.257622] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 13.257883] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 13.258102] sd 8:0:0:2: Attached scsi generic sg4 type 0 [ 13.321941] acpi IPI0001:00: GPIO: looking up 0 in _CRS [ 13.327009] ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0x42, adapter QUP I2C adapter, slave address 0x0 [ 13.361582] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 13.362473] sd 8:0:0:2: [sdd] Attached SCSI removable disk [ 13.506021] ipmi_ssif i2c-IPI0001:00: Found new BMC (man_id: 0x0005a9, prod_id: 0x0001, dev_id: 0x20) [ 14.691160] raid6: int64x1 gen() 2372 MB/s [ 14.759138] raid6: int64x1 xor() 1780 MB/s [ 14.827144] raid6: int64x2 gen() 2947 MB/s [ 14.895143] raid6: int64x2 xor() 2335 MB/s [ 14.963141] raid6: int64x4 gen() 3501 MB/s [ 15.031146] raid6: int64x4 xor() 2538 MB/s [ 15.099139] raid6: int64x8 gen() 4171 MB/s [ 15.167137] raid6: int64x8 xor() 2595 MB/s [ 15.235141] raid6: neonx1 gen() 2833 MB/s [ 15.303138] raid6: neonx1 xor() 3895 MB/s [ 15.371143] raid6: neonx2 gen() 4033 MB/s [ 15.439141] raid6: neonx2 xor() 4237 MB/s [ 15.507143] raid6: neonx4 gen() 4847 MB/s [ 15.575135] raid6: neonx4 xor() 4504 MB/s [ 15.643145] raid6: neonx8 gen() 5038 MB/s [ 15.711140] raid6: neonx8 xor() 4435 MB/s [ 15.714444] raid6: using algorithm neonx8 gen() 5038 MB/s [ 15.719830] raid6: .... xor() 4435 MB/s, rmw enabled [ 15.724778] raid6: using neon recovery algorithm [ 15.729888] async_tx: api initialized (async) [ 15.734063] xor: measuring software checksum speed [ 15.775135] 8regs : 10595.000 MB/sec [ 15.815135] 8regs_prefetch: 10011.000 MB/sec [ 15.855135] 32regs : 14522.000 MB/sec [ 15.895134] 32regs_prefetch: 13447.000 MB/sec [ 15.898786] xor: using function: 32regs (14522.000 MB/sec) [ 15.956416] Btrfs loaded, crc32c=crc32c-arm64-ce [ 16.066745] random: crng init done [ 16.227476] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 16.323252] Atheros 8031 ethernet QCOM8070:00:04: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=QCOM8070:00:04, irq=POLL) [ 16.334691] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.621062] mlx5_core 0003:01:00.0 eth3: Link down [ 16.625465] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 16.907450] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.344292] qcom-emac QCOM8070:00 eth0: Link is Down [ 18.984051] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 18.990818] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 19.391292] qcom-emac QCOM8070:00 eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.398084] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.361731] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 21.552169] e1000e: eth1 NIC Link is Down [ 21.728248] e1000e: eth2 NIC Link is Down [ 22.124737] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 22.142131] systemd[1]: Detected architecture arm64. [ 22.159422] systemd[1]: Set hostname to . [ 22.240694] systemd[1]: Listening on Journal Socket (/dev/log). [ 22.255277] systemd[1]: Listening on LVM2 metadata daemon socket. [ 22.271317] systemd[1]: Listening on Journal Socket. [ 22.291285] systemd[1]: Listening on udev Kernel Socket. [ 22.307233] systemd[1]: Reached target Swap. [ 22.319325] systemd[1]: Listening on Journal Audit Socket. [ 22.335242] systemd[1]: Reached target User and Group Name Lookups. [ 22.425554] Loading iSCSI transport class v2.0-870. [ 22.458972] iscsi: registered transport (tcp) [ 22.509189] iscsi: registered transport (iser) [ 22.591259] RPC: Registered named UNIX socket transport module. [ 22.596686] RPC: Registered udp transport module. [ 22.601369] RPC: Registered tcp transport module. [ 22.606056] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 23.742603] systemd-journald[953]: Received request to flush runtime journal from PID 1 [ 23.865516] IPMI System Interface driver. [ 23.865573] ipmi_si: probing via SPMI [ 23.865640] ipmi_si: Unable to find any System Interface(s) [ 24.006070] IPMI System Interface driver. [ 24.006209] ipmi_si: probing via SPMI [ 24.006417] ipmi_si: Unable to find any System Interface(s) [ 24.668518] new mount options do not match the existing superblock, will be ignored [ 24.710470] new mount options do not match the existing superblock, will be ignored [ 27.302611] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.717007] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 28.143437] Ebtables v2.0 registered [ 29.173231] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 29.251271] virbr0: port 1(virbr0-nic) entered blocking state [ 29.251273] virbr0: port 1(virbr0-nic) entered disabled state [ 29.251351] device virbr0-nic entered promiscuous mode [ 32.738476] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 35.105821] virbr0: port 1(virbr0-nic) entered blocking state [ 35.105824] virbr0: port 1(virbr0-nic) entered listening state [ 36.618432] virbr0: port 1(virbr0-nic) entered disabled state