All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dilip Kota <eswara.kota@linux.intel.com>
To: broonie@kernel.org, robh@kernel.org, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, daniel.schwierzeck@gmail.com,
	hauke@hauke-m.de, andriy.shevchenko@intel.com,
	cheol.yong.kim@intel.com, chuanhua.lei@linux.intel.com,
	qi-ming.wu@intel.com, Dilip Kota <eswara.kota@linux.intel.com>
Subject: [PATCH v2 7/8] dt-bindings: spi: Add support to Lightning Mountain SoC
Date: Fri, 17 Jul 2020 14:27:56 +0800	[thread overview]
Message-ID: <7d644e5d03ef534f719763e5c823c1673e53d1a5.1594957019.git.eswara.kota@linux.intel.com> (raw)
In-Reply-To: <efb650b0faa49a00788c4e0ca8ef7196bdba851d.1594957019.git.eswara.kota@linux.intel.com>
In-Reply-To: <efb650b0faa49a00788c4e0ca8ef7196bdba851d.1594957019.git.eswara.kota@linux.intel.com>

Add support to SPI controller on Intel Atom based Lightning Mountain
SoC which reuses the Lantiq SPI controller IP.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/spi/spi-lantiq-ssc.txt      | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
index ce3230c8e28dc..76a3dd35f7960 100644
--- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -1,11 +1,17 @@
 Lantiq Synchronous Serial Controller (SSC) SPI master driver
 
 Required properties:
-- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi",
+  "intel,lgm-spi"
 - #address-cells: see spi-bus.txt
 - #size-cells: see spi-bus.txt
 - reg: address and length of the spi master registers
-- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
+- interrupts:
+  For compatible "intel,lgm-ssc" - the common interrupt number for
+  all of tx rx & err interrupts.
+       or
+  For rest of the compatibles, should contain the "spi_rx", "spi_tx" and
+  "spi_err" interrupt.
 
 
 Optional properties:
@@ -27,3 +33,14 @@ spi: spi@e100800 {
 	num-cs = <6>;
 	base-cs = <1>;
 };
+
+ssc0: spi@e0800000 {
+	compatible = "intel,lgm-spi";
+	reg = <0xe0800000 0x400>;
+	interrupt-parent = <&ioapic1>;
+	interrupts = <35 1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&cgu0 LGM_CLK_NGI>, <&cgu0 LGM_GCLK_SSC0>;
+	clock-names = "freq", "gate";
+};
-- 
2.11.0


  parent reply	other threads:[~2020-07-17  6:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17  6:27 [PATCH v2 1/8] spi: lantiq: fix: Rx overflow error in full duplex mode Dilip Kota
2020-07-17  6:27 ` [PATCH v2 2/8] spi: lantiq: Add SMP support Dilip Kota
2020-07-17  6:27 ` [PATCH v2 3/8] spi: lantiq: Move interrupt control register offesets to SoC specific data structure Dilip Kota
2020-07-17  6:27 ` [PATCH v2 4/8] spi: lantiq: Add support to acknowledge interrupt Dilip Kota
2020-07-17  6:27 ` [PATCH v2 5/8] spi: lantiq: Add fifo size bit mask in SoC specific data structure Dilip Kota
2020-07-17  6:27 ` [PATCH v2 6/8] spi: lantiq: Move interrupt configuration to " Dilip Kota
2020-07-17  6:27 ` Dilip Kota [this message]
2020-07-17  6:27 ` [PATCH v2 8/8] spi: lantiq: Add support to Lightning Mountain SoC Dilip Kota
2020-07-22 13:45 ` [PATCH v2 1/8] spi: lantiq: fix: Rx overflow error in full duplex mode Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7d644e5d03ef534f719763e5c823c1673e53d1a5.1594957019.git.eswara.kota@linux.intel.com \
    --to=eswara.kota@linux.intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=broonie@kernel.org \
    --cc=cheol.yong.kim@intel.com \
    --cc=chuanhua.lei@linux.intel.com \
    --cc=daniel.schwierzeck@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hauke@hauke-m.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=qi-ming.wu@intel.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.