From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jyri Sarha Subject: Re: [PATCH RFC 2/3] ASoC: hdmi-codec: add support for bclk_ratio Date: Wed, 27 Feb 2019 19:48:33 +0200 Message-ID: <7dbea4ff-b2ea-2bd7-96aa-b1697422e691@ti.com> References: <20190222212619.ghxly3eb6dx7p2ut@shell.armlinux.org.uk> <520b346f-a874-790d-61ec-fb4ac67ad046@ti.com> <20190225140334.uy3qf55u2jjk3ith@shell.armlinux.org.uk> <20190227114747.rjvkbewiloysdi3g@shell.armlinux.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from fllv0016.ext.ti.com (fllv0016.ext.ti.com [198.47.19.142]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 5E9F9F896A3 for ; Wed, 27 Feb 2019 18:48:39 +0100 (CET) In-Reply-To: <20190227114747.rjvkbewiloysdi3g@shell.armlinux.org.uk> Content-Language: en-GB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" To: Russell King - ARM Linux admin Cc: Sven Van Asbroeck , alsa-devel@alsa-project.org, Liam Girdwood , Takashi Iwai , Peter Ujfalusi , Mark Brown List-Id: alsa-devel@alsa-project.org On 27/02/2019 13:47, Russell King - ARM Linux admin wrote: > On Mon, Feb 25, 2019 at 10:58:34PM +0200, Jyri Sarha wrote: >> I think there are other options too. The obvious one would be passing >> the blck_ratio callback trough HDMI-codec to HDMI-bridge-driver, but >> yes, I do not like that either. >> >> The other would be changing the implicit bclk_ratio to 2 x sample-width, >> and accepting blck_ratios of 36 and 40 in tda998x, and set CTS_N_M = 3 >> and CTS_N_K = 2 for them too. > To put a bit of further information out there... > > I really don't like that idea - what if we have a transmitter that > really does use a bclk_ratio of 36 or 40? That would mess up the > CTS calculation in the TDA998x. > > The equation I've come up to fit what we know for TDA998x is: > > k = m * bclk_ratio / 128 > > where k and m are parameters that we values we select for TDA998x. > This reflects the entire clock regeneration system including the sink. > The possible values of k are 1, 2, 3, 4, or 8. m are 1, 2, 4, or 8. > I also have this equation which defines the fs regenerated at the sink: > > fso = bclk_ratio * fsi * m / (128 * k) > > If we did have a ratio of 36 or 40, the first equation above fails > since k is not one of the possible integers. If we round down and use > e.g. 2 for the 36fs case, then we'd actually end up with a sample > frequency on the sink of 1.125x faster than it should be, and the sink > would suffer starvation of audio samples. If we rounded up to 3, then > the sample frequency will be 3/4 of it's true value, so the sink will > overflow and would have to discard audio samples. > > We know this happens, because that's the root of the problem at hand: > wrongly setting the m and k values for the bclk_ratio being supplied > to the TDA998x causes audio to be corrupted when reproduced by the > sink. > > Given that, we do need some way to validate the bclk_ratio when it is > set, and not during hw_params which would (a) lead to ALSA devices > failing when userspace is negotiating the parameters and (b) gives no > way in the kernel for set_bclk_ratio() to discover whether a particular > ratio is supported by the codec. > > So, I think there's three possible ways around this: > 1. adding a set_bclk_ratio() method to hdmi_codec_ops > 2. calling hw_params() when our set_bclk_ratio() method is called > (what if the rest of the format isn't set or incompatible, which > may cause the hw_params() method to fail?) > 3. adding a list of acceptable bclk_ratio values to hdmi_codec_pdata Or leaving the bclk_ratio field zero in struct hdmi_codec_params if set_bclk_ratio() is not called and leaving the bridge driver to decide what to do in such a situation. And in tda998x_audio_hw_params() doing something like this: if (audio.bclk_ratio == 0) audio.bclk_ratio = DIV_ROUND_UP(params->sample_width, 8) * 8; But then again I think it would be quite sane option to set bclk_ration in hdmi-codec to 2*sample_width and simply refuse the ratios of 36 or 40 in tda998x. Best regards, Jyri -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki