All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
To: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Felipe Balbi <balbi@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <quic_pkondeti@quicinc.com>,
	<quic_ppratap@quicinc.com>, <quic_jackp@quicinc.com>,
	<ahalaney@redhat.com>, Harsh Agarwal <quic_harshq@quicinc.com>
Subject: Re: [PATCH v3 1/3] dt-bindings: usb: dwc3: Add support for multiport related properties
Date: Fri, 18 Nov 2022 14:31:14 +0530	[thread overview]
Message-ID: <7e359c57-253e-ae87-a119-a4bf772b4d55@quicinc.com> (raw)
In-Reply-To: <20220706220943.GB572635-robh@kernel.org>

Attempt to revive this thread.

Hi Rob,

   Apologies for the delay in pursuing this thread further. Neither 
Harsh nor me were able to pursue this since July because of some other 
work load.

On 7/7/2022 3:39 AM, Rob Herring wrote:
> On Mon, Jun 27, 2022 at 06:36:53PM +0530, Harsh Agarwal wrote:
>>
>> On 6/10/2022 10:52 PM, Rob Herring wrote:
>>> On Fri, Jun 10, 2022 at 05:25:25PM +0530, Harsh Agarwal wrote:
>>>> On 6/9/2022 9:08 PM, Rob Herring wrote:
>>>>> On Wed, Jun 08, 2022 at 11:06:25PM +0530, Harsh Agarwal wrote:
>>>>>> Added support for multiport, mport, num_usb2_phy and num_usb3_phy
>>>>>> properties. These properties are used to support devices having
>>>>>> a multiport controller.
>>>>>>
>>>>>> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com>
>>>>>> ---
>>>>>>     .../devicetree/bindings/usb/snps,dwc3.yaml         | 53 ++++++++++++++++++++++
>>>>>>     1 file changed, 53 insertions(+)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>>>>>> index d41265b..9332fa2 100644
>>>>>> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>>>>>> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>>>>>> @@ -343,6 +343,32 @@ properties:
>>>>>>           This port is used with the 'usb-role-switch' property  to connect the
>>>>>>           dwc3 to type C connector.
>>>>>> +  multiport:
>>>>> Again, I don't think this is going to play well if you need to describe
>>>>> USB devices in your DT. For example, a USB hub with additional DT
>>>>> properties.
>>>> Thanks for the review Rob.
>>>> Can you please explain why would one want to describe a USB hub in device
>>>> tree ?
>>> Because someone soldered a hub on the board and then connected extra
>>> things like resets, GPIOs, supplies which are all outside of standard
>>> USB. It's quite common...
>>>
>>> There's some flavors of Beagle boards that have a USB ethernet on board.
>>> Guess what, they skipped out on a eeprom and so the device and a MAC
>>> address has to be described in DT (if you want a stable MAC addr).
>>>
>>>> IF USB hub is attached to a root port , it would be enumerated by the SW. I
>>>> am not clear how DT is coming
>>>> into picture. Even if there was a scenario to add DT properties for a hub,
>>>> then this multiport node would be like a nop
>>>> as it just helps us to get the PHY phandles in a proper way.
>>> It won't be enumerated by the SW if it has to be powered on first using
>>> non-standard resources.
>>>
>>>> Do you feel we still might have a problem with multiport node ?
>>> A board design could have a hub or device on any or all your ports.
>>>
>>>>>> +    description:
>>>>>> +      If a single USB controller supports multiple ports, then it's referred to as
>>>>>> +      a multiport controller. Each port of the multiport controller can support
>>>>>> +      either High Speed or Super Speed or both and have their own PHY phandles. Each
>>>>>> +      port is represented by "mport" node and all the "mport" nodes are grouped
>>>>>> +      together inside the "multiport" node where individual "mport" node defines the
>>>>>> +      PHYs supported by that port.
>>>>>> +
>>>>>> +  num_usb2_phy:
>>>>>> +    description: Total number of HS-PHYs defined by the multiport controller.
>>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>>> +
>>>>>> +  num_usb3_phy:
>>>>>> +    description: Total number of SS-PHYs defined by the multiport controller.
>>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>>> +
>>>>>> +  mport:
>>>>>> +    description: Each mport node represents one port of the multiport controller.
>>>>>> +    oneOf:
>>>>>> +      - required:
>>>>>> +        - usb-phy
>>>>> This is deprecated. Why are you adding it?
>>>> Do you mean "usb-phy" is deprecated ?
>>> It is replaced by 'phys'. Any new user should use 'phys'.
>>>
>>>> Internally we use usb-phy with our downstream GLUE driver
>>> Upstream does not care about that.
>>>
>>>>>> +      - required:
>>>>>> +        - phys
>>>>>> +        - phy-names
>>>>> Other multi port USB hosts just have a list of phys. Why can't you just
>>>>> use phy-names to identify each phy:
>>>>>
>>>>> phy-names = "port0-hs", "port0-ss", "port1-hs", "port1-ss", "port2-hs",
>>>>>      "port3-hs";
>>>> With the above method we would have to do some kind of string parsing on the
>>>> phy-names to get the HS and SS PHYs as we need to cater to different
>>>> combinations of Ports ( some support HS+SS , other supports SS only).
>>> You are doing string parsing anyways to get the child nodes and
>>> properties.
>>>
>>>> So one challenge here is with the "usb-phy". There we directly define the
>>>> phy phandles and that might/might-not have proper sub-strings. eg
>>>> USB_QMP_PHY . So extracting PHYS could be tricky if the phy-handle does not
>>>> have proper substring like "SS" "HS" etc.
>>> The schema can and should enforce that you have the proper strings.
>> Hi Rob,
>> Apologies for replying late.
>>
>> I get your concern. Yes we can remove the "multiport" node and instead
>> define the
>> USB phy phandles all in one place. Still I would need to add support for
>> both generic-phy and
>> usb-phy framework as downstream many vendors are using "usb-phy" and it's
>> supported by ACK as well.
> 
> Upstream is not concerned with downstream. The generic PHY has replaced
> usb-phy for many years now.
> 
> Furthermore, if downstream was using documented bindings, then we
> wouldn't be having this conversation.
> 

If we are concentrating only on generic phy's do we need to refrain from 
making any changes to downstream phy part of the driver code in core.c 
as done in this RFC series ? I wanted to update this series after 
addressing review comments. If we don't need to, then I can revert 
changes done to dwc->usb2->phy and dwc->usb3_phy in this series.

>> This would not regress anything with Generic PHY.
>>
>> @Greg can you please comment as ACK has support for usb-phy framework.
>>
>> Now coming to implementation, let's consider a 4 port USB multiport
>> controller having
>> 4 HS PHYs and 2 SS PHYs.  We can have two approaches here
>>
>> #1 -> If we could mandate using "HS" or "SS" as substring in
>> phy-names or usb-phy, then we can calculate number of HS and SS phy and also
>> get
>> corresponding PHY nodes. Only concern here is that downstream vendors might
>> need
>> to change their existing usb-phy names and add proper substring if they are
>> not doing so ;
>>
>> phy = <&usb-hs-phy>,<&usb-ss-phy>,
>>        <&usb-hs-phy1>, <&usb-ss-phy1>,
>>        <&usb-hs-phy2>, <&usb-hs-phy3>;
>>
>> phy-names = "port0-hs", "port0-ss", "port1-hs", "port1-ss", "port2-hs",
>>     "port3-hs";
>>
>>
>> OR
>>
>>
>> #2-> We could mandate defining the USB phy in HS - SS pairs.
>> For ports that has only HS PHY, we would need to define usb_nop_phy in SS
>> place.
>> Then we can calculate the number of HS & SS phys and get corresponding
>> PHY nodes by using simple fact that HS phy would be defined at odd places &
>> SS phy defined at even. Here substrings are not mandated.
>>
>> phy = <&usb-hs-phy>,<&usb-qmp-phy>,
>>        <&usb-hs-phy1>, <&usb-qmp-phy1>,
>>        <&usb-hs-phy2>, <&usb_nop_phy>
>>        <&usb-hs-phy3>, <&usb_nop_phy>;
>>
>> phy-names = "port0-hs", "port0-ss",
>> 	    "port1-hs", "port1-ss",
>> 	    "port2-hs", "usb-nop",
>> 	    "port3-hs", "usb-nop";
> 
> The whole reason for -names is to avoid something like this with filler
> entries. So I prefer #1 as I suggested.
> 
Thanks for the review. How about we do the following:
Assuming we have 3 ports where first port is HS+SS capable and the other 
two are only HS capable. We can implement phys and phy-names as :

phy = <&usb-hs-phy1>,<&usb-ss-phy1>,
	<&usb-hs-phy2>, <&usb-hs-phy3>,

phy-names = "usb2-phy-port0", "usb3-phy-port0",
		"usb2-phy-port1", "usb2-phy-port2";

Since the driver code mandates that the phy-names are supposed to be 
"usb2-phy" and "usb3-phy", we can be sure that the first part of every 
phy name starts with "usb2-phy" or "usb3-phy" and we can append -portX 
at end of each phy name to differentiate them as shown in the above example.

In the driver code we can iterate over each of the phy-names property 
and string compare them with "usb2-phy" and "usb3-phy" to identify 
whether it is HS/SS. That way even if we have only one-port the code 
would still hold good.

Let me know if that approach would be fine.

Once again, sorry for delaying this thread.

Regards,
Krishna,

> Rob

  reply	other threads:[~2022-11-18  9:01 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-08 17:36 [PATCH v3 0/3] Add support for multiport controller Harsh Agarwal
2022-06-08 17:36 ` [PATCH v3 1/3] dt-bindings: usb: dwc3: Add support for multiport related properties Harsh Agarwal
2022-06-08 21:48   ` Rob Herring
2022-06-09 15:38   ` Rob Herring
2022-06-10 11:55     ` Harsh Agarwal
2022-06-10 17:22       ` Rob Herring
2022-06-27 13:06         ` Harsh Agarwal
2022-07-06 22:09           ` Rob Herring
2022-11-18  9:01             ` Krishna Kurapati PSSNV [this message]
2022-06-08 17:36 ` [PATCH v3 2/3] usb: phy: Add devm_of_usb_get_phy_by_phandle Harsh Agarwal
2022-06-08 17:36 ` [PATCH v3 3/3] usb: dwc3: Refactor PHY logic to support Multiport Controller Harsh Agarwal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7e359c57-253e-ae87-a119-a4bf772b4d55@quicinc.com \
    --to=quic_kriskura@quicinc.com \
    --cc=ahalaney@redhat.com \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=quic_harshq@quicinc.com \
    --cc=quic_jackp@quicinc.com \
    --cc=quic_pkondeti@quicinc.com \
    --cc=quic_ppratap@quicinc.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.