All of lore.kernel.org
 help / color / mirror / Atom feed
* [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-10-21 18:31 ` Corentin Labbe
  0 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-10-21 18:31 UTC (permalink / raw)
  To: linus.walleij, mripard, wens, linux-gpio, lee.jones
  Cc: linux-kernel, linux-arm-kernel

Hello

On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 16 MiB at 0xbec00000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000176] Console: colour dummy device 80x30
[    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000251] pid_max: default: 32768 minimum: 301
[    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001117] CPU: Testing write buffer coherency: ok
[    0.001420] /cpus/cpu@0 missing clock-frequency property
[    0.001442] /cpus/cpu@1 missing clock-frequency property
[    0.001459] /cpus/cpu@2 missing clock-frequency property
[    0.001477] /cpus/cpu@3 missing clock-frequency property
[    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
[    0.002119] rcu: Hierarchical SRCU implementation.
[    0.002580] smp: Bringing up secondary CPUs ...
[    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.034880] smp: Brought up 1 node, 4 CPUs
[    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.034912] CPU: All CPU(s) started in HYP mode.
[    0.034919] CPU: Virtualization extensions available.
[    0.035754] devtmpfs: initialized
[    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.042026] pinctrl core: initialized pinctrl subsystem
[    0.043049] NET: Registered protocol family 16
[    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.045360] thermal_sys: Registered thermal governor 'step_wise'
[    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
[    0.123361] alg_test_stdrng test ansi_cprng
[    0.150327] SCSI subsystem initialized
[    0.150742] usbcore: registered new interface driver usbfs
[    0.150789] usbcore: registered new interface driver hub
[    0.150845] usbcore: registered new device driver usb
[    0.151014] mc: Linux media interface: v0.10
[    0.151049] videodev: Linux video capture interface: v2.00
[    0.151149] pps_core: LinuxPPS API ver. 1 registered
[    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.151180] PTP clock support registered
[    0.151575] Advanced Linux Sound Architecture Driver Initialized.
[    0.152420] clocksource: Switched to clocksource arch_sys_counter
[    0.159588] NET: Registered protocol family 2
[    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
[    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.160689] NET: Registered protocol family 1
[    0.161248] RPC: Registered named UNIX socket transport module.
[    0.161263] RPC: Registered udp transport module.
[    0.161272] RPC: Registered tcp transport module.
[    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.161510] Unpacking initramfs...
[    1.988543] Freeing initrd memory: 30460K
[    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[    1.996523] NFS: Registering the id_resolver key type
[    1.996573] Key type id_resolver registered
[    1.996582] Key type id_legacy registered
[    1.996659] NET: Registered protocol family 38
[    1.996725] bounce: pool size: 64 pages
[    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.996782] io scheduler mq-deadline registered
[    1.996790] io scheduler kyber registered
[    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
[    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
[    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
[    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[    2.062567] lima 1c40000.gpu: bus rate = 200000000
[    2.062584] lima 1c40000.gpu: mod rate = 297000000
[    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
[    2.071234] loop: module loaded
[    2.072785] libphy: Fixed MDIO Bus: probed
[    2.073308] CAN device driver interface
[    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.074063] ehci-platform: EHCI generic platform driver
[    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.074579] ohci-platform: OHCI generic platform driver
[    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
[    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
[    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
[    2.076673] i2c /dev entries driver
[    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
[    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
[    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
[    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
[    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
[    2.407064] random: fast init done
[    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
[    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
[    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
[    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
[    3.874269] sun8i-ce 1c15000.crypto: Register md5
[    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
[    3.980669] sun8i-ce 1c15000.crypto: Register sha1
[    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
[    4.104525] sun8i-ce 1c15000.crypto: Register sha224
[    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
[    4.323465] sun8i-ce 1c15000.crypto: Register sha256
[    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
[    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
[    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
[    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
[    4.484782] alg_test_stdrng test sun8i-ce-prng
[    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
[    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
[    4.486084] usbcore: registered new interface driver usbhid
[    4.486098] usbhid: USB HID core driver
[    4.488554] NET: Registered protocol family 17
[    4.488580] can: controller area network core
[    4.488668] NET: Registered protocol family 29
[    4.488681] can: raw protocol
[    4.488691] can: broadcast manager protocol
[    4.488705] can: netlink gateway - max_hops=1
[    4.488918] Key type dns_resolver registered
[    4.489063] Registering SWP/SWPB emulation handler
[    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
[    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
[    4.508216] printk: console [ttyS0] disabled
[    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
[    5.585887] printk: console [ttyS0] enabled
[    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
[    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
[    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
[    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
[    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
[    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
[    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
[    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
[    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
[    5.780739] vcc-3v3: supplied by regulator-dummy
[    5.786045] vdd-cpu: supplied by regulator-dummy
[    5.791332] vdd-sys: supplied by regulator-dummy
[    5.796585] dcdc4: supplied by regulator-dummy
[    5.801647] vcc-dram: supplied by regulator-dummy
[    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
[    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
[    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
[    5.828002] axp20x-adc axp22x-adc: DMA mask not set
[    5.833987] axp20x-i2c 1-0034: AXP20X driver loaded
[    5.839676] Registered IR keymap rc-empty
[    5.843800] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
[    5.850532] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1
[    5.858103] sunxi-ir 1c21800.ir: initialized sunXi IR driver
[    5.864697] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[    5.874795] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[    5.875558] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    5.876884] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    5.878097] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    5.878735] ehci-platform 1c19000.usb: EHCI Host Controller
[    5.878762] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 1
[    5.879477] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    5.925620] ehci-platform 1c19000.usb: irq 37, io mem 0x01c19000
[    5.952422] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
[    5.959298] hub 1-0:1.0: USB hub found
[    5.963115] hub 1-0:1.0: 1 port detected
[    5.968106] ehci-platform 1c1c000.usb: EHCI Host Controller
[    5.973724] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    5.981683] ehci-platform 1c1c000.usb: irq 39, io mem 0x01c1c000
[    6.012423] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    6.019222] hub 2-0:1.0: USB hub found
[    6.023042] hub 2-0:1.0: 1 port detected
[    6.027973] ohci-platform 1c19400.usb: Generic Platform OHCI controller
[    6.034626] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 3
[    6.042544] ohci-platform 1c19400.usb: irq 38, io mem 0x01c19400
[    6.117046] hub 3-0:1.0: USB hub found
[    6.120832] hub 3-0:1.0: 1 port detected
[    6.125796] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    6.132452] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    6.140346] ohci-platform 1c1c400.usb: irq 40, io mem 0x01c1c400
[    6.217070] hub 4-0:1.0: USB hub found
[    6.220858] hub 4-0:1.0: 1 port detected
[    6.225960] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.234620] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    6.244069] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.244793] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[    6.245206] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.245793] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.246659] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    6.247794] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.251915] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.297008] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    6.306355] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.306908] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.307660] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.307935] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[   18.812596] ALSA device list:
[   18.815569]   No soundcards found.
[   18.821014] Freeing unused kernel memory: 1024K
[   18.825777] Run /init as init process

I have bisected this issue but some (partialy unrelated) crash prevent to find the good commit:
git bisect start
# good: [3acff11cef1dece31cd29956f19181895996a7c5] regulator: gpio: Honor regulator-boot-on property
git bisect good 3acff11cef1dece31cd29956f19181895996a7c5
# bad: [6228cc8aed9e51afa56727b11001b37913e4dda6] regulator: rtmv20: Add missing regcache cache only before marked as dirty
git bisect bad 6228cc8aed9e51afa56727b11001b37913e4dda6
# good: [8186749621ed6b8fc42644c399e8c755a2b6f630] Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
git bisect good 8186749621ed6b8fc42644c399e8c755a2b6f630
# good: [60e76bb8a4e4c5398ea9053535e1fd0c9d6bb06e] Merge tag 'm68knommu-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
git bisect good 60e76bb8a4e4c5398ea9053535e1fd0c9d6bb06e
# good: [d566a9c2d482640abf5e602957b44e7b3bbe858d] perf sched: Prefer sched_waking event when it exists
git bisect good d566a9c2d482640abf5e602957b44e7b3bbe858d
# skip: [ab97a28908bff7ffdadd50da17c2b4d9a4dade86] Merge branch 'sfc-more-EF100-fixes'
git bisect skip ab97a28908bff7ffdadd50da17c2b4d9a4dade86
# bad: [335956421c86f64fd46186d76d3961f6adcff187] cxgb4: Fix work request size calculation for loopback test
git bisect bad 335956421c86f64fd46186d76d3961f6adcff187
# skip: [335956421c86f64fd46186d76d3961f6adcff187] cxgb4: Fix work request size calculation for loopback test
git bisect skip 335956421c86f64fd46186d76d3961f6adcff187
# good: [e764a1e32337aaf325fc5b14a5bbd06eabba4699] Merge branch 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
git bisect good e764a1e32337aaf325fc5b14a5bbd06eabba4699
# skip: [884e0d3dd59dde1c1f0fbb5b9db2bcdc581982c7] Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
git bisect skip 884e0d3dd59dde1c1f0fbb5b9db2bcdc581982c7
# good: [0ac10dc1888cd1a8b994f32b51f0eaeba1e803ef] Merge branch 'bpf_iter-uapi-fix'
git bisect good 0ac10dc1888cd1a8b994f32b51f0eaeba1e803ef
# good: [fc4177be963dccad73b98d7db3a8a38911f952b7] exec: restore EACCES of S_ISDIR execve()
git bisect good fc4177be963dccad73b98d7db3a8a38911f952b7
# skip: [410520d07f5c66a6c1f3eb7ef2063d9bdd3d440b] Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux
git bisect skip 410520d07f5c66a6c1f3eb7ef2063d9bdd3d440b
# good: [0f71241a8e32baf9ac290cf915bc9b3ff265f7d3] selftests/exec: add file type errno tests
git bisect good 0f71241a8e32baf9ac290cf915bc9b3ff265f7d3
# good: [638037b158df00a860251772239778a25a692b8c] NFS: Add tracepoints for layouterror and layoutstats.
git bisect good 638037b158df00a860251772239778a25a692b8c
# skip: [1195d58f003bf84d37fc5c30017600e09ba567b2] Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip 1195d58f003bf84d37fc5c30017600e09ba567b2
# skip: [6ffdcde4ee9a20beda096dec664da89002610d7d] Merge tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
git bisect skip 6ffdcde4ee9a20beda096dec664da89002610d7d
# good: [44ad23dfbccbcd26d6ca504eba1ac55755864969] libbpf: Handle BTF pointer sizes more carefully
git bisect good 44ad23dfbccbcd26d6ca504eba1ac55755864969
# skip: [eb1319af4119c4936e02c879295e9fd4d50bbe3a] Merge tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip eb1319af4119c4936e02c879295e9fd4d50bbe3a
# good: [6c357848b44b4016ca422178aa368a7472245f6f] mm: replace hpage_nr_pages with thp_nr_pages
git bisect good 6c357848b44b4016ca422178aa368a7472245f6f
# good: [2db13a9b30f7e438777eb1a462c4b055ba948b89] perf bench numa: Use numa_node_to_cpus() to bind tasks to nodes
git bisect good 2db13a9b30f7e438777eb1a462c4b055ba948b89
# skip: [713eee84720e6525bc5b65954c5087604a15f5e8] Merge tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
git bisect skip 713eee84720e6525bc5b65954c5087604a15f5e8
# good: [87bd8c2b93ae899ecd90a5e0550cdae4260cc4ca] Merge tag 'sound-fix-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
git bisect good 87bd8c2b93ae899ecd90a5e0550cdae4260cc4ca
# skip: [7f5faaaa5909bb0b26dcd309424da14bdf0c7e93] Merge tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip 7f5faaaa5909bb0b26dcd309424da14bdf0c7e93
# good: [8a8fb8977ea2bdf160b9e475cf2350abbad4f0e7] scsi: scsi_transport_sas: Add spaces around binary operator "|"
git bisect good 8a8fb8977ea2bdf160b9e475cf2350abbad4f0e7
# good: [18737f4243abe02f55ad62ad4baa04c318b48e8d] Merge branch 'akpm' (patches from Andrew)
git bisect good 18737f4243abe02f55ad62ad4baa04c318b48e8d
# good: [e8efa9b88e3c20a20ff34bb33e2e94bf6896016a] md: get sysfs entry after redundancy attr group create
git bisect good e8efa9b88e3c20a20ff34bb33e2e94bf6896016a
# good: [846f9e1fb9b9a2c4eecefa2fdbfb51e975a7d532] dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
git bisect good 846f9e1fb9b9a2c4eecefa2fdbfb51e975a7d532
# skip: [50f6c7dbd973092d8e5f3c89f29eb4bea19fdebd] Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip 50f6c7dbd973092d8e5f3c89f29eb4bea19fdebd
# skip: [b07175dc41babfec057f494d22a750af755297d8] Merge tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
git bisect skip b07175dc41babfec057f494d22a750af755297d8
# good: [3c4dc21b75a74d4a8458624649a3e09af399a384] perf: ftrace: Add set_tracing_options() to set all trace options
git bisect good 3c4dc21b75a74d4a8458624649a3e09af399a384
# good: [45d93065c8ec4e671f4b1ff02b5b3a633658a92f] mfd: stm32: Enable regmap fast_io for stm32-lptimer
git bisect good 45d93065c8ec4e671f4b1ff02b5b3a633658a92f
# skip: [7d2594cd1fa0b03b2746ce811926ee150a3a14fa] mfd: smsc-ece1099: Remove driver
git bisect skip 7d2594cd1fa0b03b2746ce811926ee150a3a14fa
# skip: [db06ea341fcd1752fbdb58454507faa140e3842f] sfc: really check hash is valid before using it
git bisect skip db06ea341fcd1752fbdb58454507faa140e3842f
# skip: [a3f673d0092cee167b2a6e3d61454405d0a06b25] dt-bindings: mfd: st,stmfx: Remove I2C unit name
git bisect skip a3f673d0092cee167b2a6e3d61454405d0a06b25
# good: [475f63ae63b5102ae6423d1712333929d04d6ecc] kexec_file: Correctly output debugging information for the PT_LOAD ELF header
git bisect good 475f63ae63b5102ae6423d1712333929d04d6ecc
# skip: [4ee1d9dc8073acd40f04e5fe3771a5dff978d077] mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
git bisect skip 4ee1d9dc8073acd40f04e5fe3771a5dff978d077
# good: [5c04da55c754c44937b3d19c6522f9023fd5c5d5] netfilter: ebtables: reject bogus getopt len value
git bisect good 5c04da55c754c44937b3d19c6522f9023fd5c5d5
# good: [f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade] can: j1939: fix support for multipacket broadcast message
git bisect good f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade
# good: [2ed0b7578170c3bab10cde09d4440897b305e40c] 9p: Remove unneeded cast from memory allocation
git bisect good 2ed0b7578170c3bab10cde09d4440897b305e40c
# skip: [e7b85500885f2a70129f5d3a72153e23b37d0fe5] mfd: max77693-private: Drop a duplicated word
git bisect skip e7b85500885f2a70129f5d3a72153e23b37d0fe5
# good: [51a4cc112c7a42b62a91bcccdfac42e7c4561729] io_uring: defer file table grabbing request cleanup for locked requests
git bisect good 51a4cc112c7a42b62a91bcccdfac42e7c4561729
# skip: [f6513bd39c15af8f8a63b1fbfcb1bf4717241655] Merge tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
git bisect skip f6513bd39c15af8f8a63b1fbfcb1bf4717241655
# good: [3d4a87576f3762c8c986950af157bc9025808b5c] mfd: sprd-sc27xx-spi: Fix symbol 'sprd_pmic_detect_charger_type' was not declared warning
git bisect good 3d4a87576f3762c8c986950af157bc9025808b5c
# skip: [9123e3a74ec7b934a4a099e98af6a61c2f80bbf5] Linux 5.9-rc1
git bisect skip 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5
# good: [492e4edba6e2fc0620a69266d33f29c4a1f9ac1e] perf ftrace: Make option description initials all capital letters
git bisect good 492e4edba6e2fc0620a69266d33f29c4a1f9ac1e
# skip: [e15d7f2b81d2e7d93115d46fa931b366c1cdebc2] mfd: syscon: Use a unique name with regmap_config
git bisect skip e15d7f2b81d2e7d93115d46fa931b366c1cdebc2
# skip: [06a4ec1d9dc652e17ee3ac2ceb6c7cf6c2b75cdd] Merge tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
git bisect skip 06a4ec1d9dc652e17ee3ac2ceb6c7cf6c2b75cdd
# skip: [4b6c093e21d36bede0fd88fd0aeb3b03647260e4] Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
git bisect skip 4b6c093e21d36bede0fd88fd0aeb3b03647260e4
# good: [07d88c97aef826f1ba8a5026ea30700f85433057] mfd: db8500-prcmu: Remove incorrect function header from .probe() function
git bisect good 07d88c97aef826f1ba8a5026ea30700f85433057
# good: [b35fd7422c2f8e04496f5a770bd4e1a205414b3f] block: check queue's limits.discard_granularity in __blkdev_issue_discard()
git bisect good b35fd7422c2f8e04496f5a770bd4e1a205414b3f
# good: [981b1261bfdf7cb3e3c2029ecc4a1510d46eff9e] mfd: si476x-cmd: Add missing documentation for si476x_cmd_fm_rds_status()'s arg 'report'
git bisect good 981b1261bfdf7cb3e3c2029ecc4a1510d46eff9e
# good: [7f9bf6e82461b97ce43a912cb4a959c5a41367ac] Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
git bisect good 7f9bf6e82461b97ce43a912cb4a959c5a41367ac
# good: [d58669b093997e4e5f98c38a54f99761657c19d2] ACPI: APD: Change name from ST to FCH
git bisect good d58669b093997e4e5f98c38a54f99761657c19d2
# good: [6dfdf673ccb24dccc95b342235cac3e585c5af34] sh: use the generic dma coherent remap allocator
git bisect good 6dfdf673ccb24dccc95b342235cac3e585c5af34
# good: [52416ffcf823ee11aa19792715664ab94757f111] x86/purgatory: Don't generate debug info for purgatory.ro
git bisect good 52416ffcf823ee11aa19792715664ab94757f111
# good: [09fc67b500c7f0bb1b5ed774197ac7f2c5285655] kprobes: Remove show_registers() function prototype
git bisect good 09fc67b500c7f0bb1b5ed774197ac7f2c5285655
# good: [c8c412f976124d85b8ded85c6ac3f760c12b63a3] SMB3: Fix mkdir when idsfromsid configured on mount
git bisect good c8c412f976124d85b8ded85c6ac3f760c12b63a3
# skip: [4f4ed4543e2096dc0158ff79bd6d8bc09e27fa93] mfd: Replace HTTP links with HTTPS ones
git bisect skip 4f4ed4543e2096dc0158ff79bd6d8bc09e27fa93
# good: [0bb605c2c7f2b4b314b91510810b226de7f34fa1] sh: Add SECCOMP_FILTER
git bisect good 0bb605c2c7f2b4b314b91510810b226de7f34fa1
# skip: [1a5d9dbbaf3af4d029a081bd58dc83b6a25d109e] Merge tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect skip 1a5d9dbbaf3af4d029a081bd58dc83b6a25d109e
# skip: [9cbbc451098ec1e9942886023203b2247dec94bd] sfc: take correct lock in ef100_reset()
git bisect skip 9cbbc451098ec1e9942886023203b2247dec94bd
# skip: [341323fa0eed1b201130b7af84d40fa04725c832] Merge tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect skip 341323fa0eed1b201130b7af84d40fa04725c832
# good: [46b5780688c0d825b6b8d49b267b13102bea512d] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
git bisect good 46b5780688c0d825b6b8d49b267b13102bea512d
# skip: [819e42e00d2eca536d5187de21971ed345861102] mfd: motorola-cpcap: Disable interrupt for suspend
git bisect skip 819e42e00d2eca536d5187de21971ed345861102
# skip: [37711e5e2325535bf094bdc0a66790d659b52d5b] Merge tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
git bisect skip 37711e5e2325535bf094bdc0a66790d659b52d5b
# skip: [e9faaf056d2812c0b602c3dbeb5b83756b58abc5] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
git bisect skip e9faaf056d2812c0b602c3dbeb5b83756b58abc5
# good: [f516fb704d02fff292cb79a6ad85c56529f7c8cf] dt-bindings: Whitespace clean-ups in schema files
git bisect good f516fb704d02fff292cb79a6ad85c56529f7c8cf
# skip: [8b61fba503904acae24aeb2bd5569b4d6544d48f] macvlan: validate setting of multiple remote source MAC addresses
git bisect skip 8b61fba503904acae24aeb2bd5569b4d6544d48f
# good: [cb75c95c5262328bd4da3dd334f6826a3a34a979] Documentation/locking/locktypes: Fix a typo
git bisect good cb75c95c5262328bd4da3dd334f6826a3a34a979
# good: [d4e7cd36a90e38e0276d6ce0c20f5ccef17ec38c] io_uring: sanitize double poll handling
git bisect good d4e7cd36a90e38e0276d6ce0c20f5ccef17ec38c
# skip: [5a4fe0624687e62919a5913dc7c937fbfcf61fdc] mailmap: Add WeiXiong Liao
git bisect skip 5a4fe0624687e62919a5913dc7c937fbfcf61fdc
# good: [03dd061f0d203c3479791490d6b9359b2eaf9fec] sh: bring syscall_set_return_value in line with other architectures
git bisect good 03dd061f0d203c3479791490d6b9359b2eaf9fec
# skip: [d6bd5201f7eaa9c15ea9b0f8ff17dd7bc3b9d78f] mailmap: Restore dictionary sorting
git bisect skip d6bd5201f7eaa9c15ea9b0f8ff17dd7bc3b9d78f
# good: [ff041727e9e029845857cac41aae118ead5e261b] NFS: Don't move layouts to plh_return_segs list while in use
git bisect good ff041727e9e029845857cac41aae118ead5e261b
# skip: [e6a43910d55d09dae65772ad571d4c61e459b17a] sfc: don't free_irq()s if they were never requested
git bisect skip e6a43910d55d09dae65772ad571d4c61e459b17a
# skip: [2cc3c4b3c2e9c99e90aaf19cd801ff2c160f283c] Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
git bisect skip 2cc3c4b3c2e9c99e90aaf19cd801ff2c160f283c
# skip: [d097965bb6682afe1f8481923b16c033f708923b] mfd: core: Fix formatting of MFD helpers
git bisect skip d097965bb6682afe1f8481923b16c033f708923b
# skip: [6f6aea7e966cda5a817d091e938c2d9b52209893] parisc: fix PMD pages allocation by restoring pmd_alloc_one()
git bisect skip 6f6aea7e966cda5a817d091e938c2d9b52209893
# good: [b4487b93545214a9db8cbf32e86411677b0cca21] nfs: Fix getxattr kernel panic and memory overflow
git bisect good b4487b93545214a9db8cbf32e86411677b0cca21
# good: [8dfddfb79653df7c38a9c8c4c034f242a36acee9] net: qrtr: fix usage of idr in port assignment to socket
git bisect good 8dfddfb79653df7c38a9c8c4c034f242a36acee9
# good: [4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431] perf/x86/rapl: Fix missing psys sysfs attributes
git bisect good 4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431
# good: [7f8802f2d2ed67ffbac9264f946a52507f749e19] ACPI: APD: Add a fmw property is_raven
git bisect good 7f8802f2d2ed67ffbac9264f946a52507f749e19
# skip: [788f920a0f137baa4dbc1efdd5039c4a0a01b8d7] sfc: null out channel->rps_flow_id after freeing it
git bisect skip 788f920a0f137baa4dbc1efdd5039c4a0a01b8d7
# skip: [d84835b118ed8c14c21fa056ca54014b2eff068b] Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
git bisect skip d84835b118ed8c14c21fa056ca54014b2eff068b
# good: [563c53e73b8b6ec842828736f77e633f7b0911e9] NFS: Fix flexfiles read failover
git bisect good 563c53e73b8b6ec842828736f77e633f7b0911e9
# skip: [5bbec3cfe376ed0014d9456a9be11d5ed75d587b] Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
git bisect skip 5bbec3cfe376ed0014d9456a9be11d5ed75d587b
# good: [fe6a8fc5ed2f0081f17375ae2005718522c392c6] loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
git bisect good fe6a8fc5ed2f0081f17375ae2005718522c392c6
# good: [c1e2b8422bf946c80e832cee22b3399634f87a2c] block: fix double account of flush request's driver tag
git bisect good c1e2b8422bf946c80e832cee22b3399634f87a2c
# skip: [4cf7562190c795f1f95be6ee0d161107d0dc5d49] Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
git bisect skip 4cf7562190c795f1f95be6ee0d161107d0dc5d49
# good: [76d4467a97bd8c4bb01e810a5129c8f96d7dcbf8] riscv: Setup exception vector for nommu platform
git bisect good 76d4467a97bd8c4bb01e810a5129c8f96d7dcbf8
# skip: [cf84dc0bb40f4b41f7853f224b37954cf273ee24] mfd: rn5t618: Make restart handler atomic safe
git bisect skip cf84dc0bb40f4b41f7853f224b37954cf273ee24
# good: [76d10256a97a7cab72b123d54b766a3c17da658c] x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
git bisect good 76d10256a97a7cab72b123d54b766a3c17da658c
# skip: [29e44f4535faa71a70827af3639b5e6762d8f02a] watch_queue: Limit the number of watches a user can hold
git bisect skip 29e44f4535faa71a70827af3639b5e6762d8f02a
# good: [74f41adab0f4a61857833e1b6fa8e9ad12c251b6] perf/x86/rapl: Support multiple RAPL unit quirks
git bisect good 74f41adab0f4a61857833e1b6fa8e9ad12c251b6
# skip: [23ef2b642b85f03a109fbf5958134a5e40193dbd] mfd: da9055: pdata.h: Drop a duplicated word
git bisect skip 23ef2b642b85f03a109fbf5958134a5e40193dbd
# good: [a1bd06853ee478d37fae9435c5521e301de94c67] sched: Fix use of count for nr_running tracepoint
git bisect good a1bd06853ee478d37fae9435c5521e301de94c67
# skip: [594f1935b373019aacaff00929ae61fec0ec83a5] mfd: rn5t618: Fix caching of battery related registers
git bisect skip 594f1935b373019aacaff00929ae61fec0ec83a5
# good: [709ed1bcef12398ac1a35c149f3e582db04456c2] EDAC/ie31200: Fallback if host bridge device is already initialized
git bisect good 709ed1bcef12398ac1a35c149f3e582db04456c2
# skip: [1f0fa85c07fb53d756219cf7e6e8e77eab6e75eb] mfd: max14577: Remove redundant initialization of variable current_bits
git bisect skip 1f0fa85c07fb53d756219cf7e6e8e77eab6e75eb
# good: [5f0b06da5cde3f0a613308b89f0afea678559fdf] dt-bindings: Remove more cases of 'allOf' containing a '$ref'
git bisect good 5f0b06da5cde3f0a613308b89f0afea678559fdf
# skip: [114294d276279d6cda81f9c685452239ea89cdb8] mfd: mfd-core: Add mechanism for removal of a subset of children
git bisect skip 114294d276279d6cda81f9c685452239ea89cdb8
# skip: [466a62d7642f02f36d37d9b30c19a725538a01ca] mfd: core: Make a best effort attempt to match devices with the correct of_nodes
git bisect skip 466a62d7642f02f36d37d9b30c19a725538a01ca
# skip: [77b3ddab713a2276c789a8e1beb339ce185cebc2] mfd: madera: Improve handling of regulator unbinding
git bisect skip 77b3ddab713a2276c789a8e1beb339ce185cebc2
# good: [405fa8ac89e7aaa87282df659e525992f2639e76] futex: Convert to use the preferred 'fallthrough' macro
git bisect good 405fa8ac89e7aaa87282df659e525992f2639e76
# skip: [564de7628dab38f2d51bac2608fe1043704622b7] mfd: kempld-core: Fix 'assignment of read-only location' error
git bisect skip 564de7628dab38f2d51bac2608fe1043704622b7
# good: [19fe87fd854a92c746ac73cb91a0bebac07a4618] clk: x86: Support RV architecture
git bisect good 19fe87fd854a92c746ac73cb91a0bebac07a4618
# skip: [3d858942250820b9adc35f963a257481d6d4c81d] mfd: dln2: Run event handler loop under spinlock
git bisect skip 3d858942250820b9adc35f963a257481d6d4c81d
# good: [0c64a0dce51faa9c706fdf1f957d6f19878f4b81] sh: landisk: Add missing initialization of sh_io_port_base
git bisect good 0c64a0dce51faa9c706fdf1f957d6f19878f4b81
# skip: [85c307850784eaa0f81713edf707e6f2e4d64eb3] mfd: axp20x: Allow the AXP803 to be probed by I2C
git bisect skip 85c307850784eaa0f81713edf707e6f2e4d64eb3
# good: [bcfd218b66790243ef303c1b35ce59f786ded225] perf/x86/rapl: Add support for Intel SPR platform
git bisect good bcfd218b66790243ef303c1b35ce59f786ded225
# skip: [9ece3601aed46f7b460b79cd7d60908b47b2b0d4] mfd: da9063: Add support for latest DA silicon revision
git bisect skip 9ece3601aed46f7b460b79cd7d60908b47b2b0d4
# good: [f3db6de55e95eee6457a14912dd382a6cfc98edd] Merge branch 'pm-cpufreq'
git bisect good f3db6de55e95eee6457a14912dd382a6cfc98edd
# good: [bf2bcd6f1a8822ea45465f86d705951725883ee8] otx2_common: Use devm_kcalloc() in otx2_config_npa()
git bisect good bf2bcd6f1a8822ea45465f86d705951725883ee8
# skip: [091c6110862bce4e2380e353cb062dcb6a56bcb6] mfd: da9063: Fix revision handling to correctly select reg tables
git bisect skip 091c6110862bce4e2380e353cb062dcb6a56bcb6
# good: [a6d996cbd38b42341ad3fce74506b9fdc280e395] x86/alternatives: Acquire pte lock with interrupts enabled
git bisect good a6d996cbd38b42341ad3fce74506b9fdc280e395
# skip: [44e6171ed04a0cd0378e2503f03a444ebdd4e8e3] mfd: core: Add OF_MFD_CELL_REG() helper
git bisect skip 44e6171ed04a0cd0378e2503f03a444ebdd4e8e3
# good: [cc172ff301d8079e941a6eb31758951a6d764084] sched/debug: Fix the alignment of the show-state debug output
git bisect good cc172ff301d8079e941a6eb31758951a6d764084
# good: [f91daf565b0e272a33bd3fcd19eaebd331c5cffd] io_uring: short circuit -EAGAIN for blocking read attempt
git bisect good f91daf565b0e272a33bd3fcd19eaebd331c5cffd
# only skipped commits left to test
# possible first bad commit: [335956421c86f64fd46186d76d3961f6adcff187] cxgb4: Fix work request size calculation for loopback test
# possible first bad commit: [ab97a28908bff7ffdadd50da17c2b4d9a4dade86] Merge branch 'sfc-more-EF100-fixes'
# possible first bad commit: [e6a43910d55d09dae65772ad571d4c61e459b17a] sfc: don't free_irq()s if they were never requested
# possible first bad commit: [788f920a0f137baa4dbc1efdd5039c4a0a01b8d7] sfc: null out channel->rps_flow_id after freeing it
# possible first bad commit: [9cbbc451098ec1e9942886023203b2247dec94bd] sfc: take correct lock in ef100_reset()
# possible first bad commit: [db06ea341fcd1752fbdb58454507faa140e3842f] sfc: really check hash is valid before using it
# possible first bad commit: [8b61fba503904acae24aeb2bd5569b4d6544d48f] macvlan: validate setting of multiple remote source MAC addresses
# possible first bad commit: [06a4ec1d9dc652e17ee3ac2ceb6c7cf6c2b75cdd] Merge tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
# possible first bad commit: [4cf7562190c795f1f95be6ee0d161107d0dc5d49] Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
# possible first bad commit: [5a4fe0624687e62919a5913dc7c937fbfcf61fdc] mailmap: Add WeiXiong Liao
# possible first bad commit: [d6bd5201f7eaa9c15ea9b0f8ff17dd7bc3b9d78f] mailmap: Restore dictionary sorting
# possible first bad commit: [29e44f4535faa71a70827af3639b5e6762d8f02a] watch_queue: Limit the number of watches a user can hold
# possible first bad commit: [9123e3a74ec7b934a4a099e98af6a61c2f80bbf5] Linux 5.9-rc1
# possible first bad commit: [2cc3c4b3c2e9c99e90aaf19cd801ff2c160f283c] Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
# possible first bad commit: [6f6aea7e966cda5a817d091e938c2d9b52209893] parisc: fix PMD pages allocation by restoring pmd_alloc_one()
# possible first bad commit: [4b6c093e21d36bede0fd88fd0aeb3b03647260e4] Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
# possible first bad commit: [d84835b118ed8c14c21fa056ca54014b2eff068b] Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
# possible first bad commit: [5bbec3cfe376ed0014d9456a9be11d5ed75d587b] Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
# possible first bad commit: [713eee84720e6525bc5b65954c5087604a15f5e8] Merge tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
# possible first bad commit: [50f6c7dbd973092d8e5f3c89f29eb4bea19fdebd] Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [1195d58f003bf84d37fc5c30017600e09ba567b2] Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [7f5faaaa5909bb0b26dcd309424da14bdf0c7e93] Merge tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [eb1319af4119c4936e02c879295e9fd4d50bbe3a] Merge tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [410520d07f5c66a6c1f3eb7ef2063d9bdd3d440b] Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux
# possible first bad commit: [f6513bd39c15af8f8a63b1fbfcb1bf4717241655] Merge tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
# possible first bad commit: [37711e5e2325535bf094bdc0a66790d659b52d5b] Merge tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
# possible first bad commit: [6ffdcde4ee9a20beda096dec664da89002610d7d] Merge tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
# possible first bad commit: [b07175dc41babfec057f494d22a750af755297d8] Merge tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
# possible first bad commit: [341323fa0eed1b201130b7af84d40fa04725c832] Merge tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
# possible first bad commit: [1a5d9dbbaf3af4d029a081bd58dc83b6a25d109e] Merge tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
# possible first bad commit: [884e0d3dd59dde1c1f0fbb5b9db2bcdc581982c7] Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
# possible first bad commit: [e15d7f2b81d2e7d93115d46fa931b366c1cdebc2] mfd: syscon: Use a unique name with regmap_config
# possible first bad commit: [4f4ed4543e2096dc0158ff79bd6d8bc09e27fa93] mfd: Replace HTTP links with HTTPS ones
# possible first bad commit: [3d858942250820b9adc35f963a257481d6d4c81d] mfd: dln2: Run event handler loop under spinlock
# possible first bad commit: [77b3ddab713a2276c789a8e1beb339ce185cebc2] mfd: madera: Improve handling of regulator unbinding
# possible first bad commit: [114294d276279d6cda81f9c685452239ea89cdb8] mfd: mfd-core: Add mechanism for removal of a subset of children
# possible first bad commit: [4ee1d9dc8073acd40f04e5fe3771a5dff978d077] mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
# possible first bad commit: [1f0fa85c07fb53d756219cf7e6e8e77eab6e75eb] mfd: max14577: Remove redundant initialization of variable current_bits
# possible first bad commit: [594f1935b373019aacaff00929ae61fec0ec83a5] mfd: rn5t618: Fix caching of battery related registers
# possible first bad commit: [e7b85500885f2a70129f5d3a72153e23b37d0fe5] mfd: max77693-private: Drop a duplicated word
# possible first bad commit: [23ef2b642b85f03a109fbf5958134a5e40193dbd] mfd: da9055: pdata.h: Drop a duplicated word
# possible first bad commit: [cf84dc0bb40f4b41f7853f224b37954cf273ee24] mfd: rn5t618: Make restart handler atomic safe
# possible first bad commit: [564de7628dab38f2d51bac2608fe1043704622b7] mfd: kempld-core: Fix 'assignment of read-only location' error
# possible first bad commit: [85c307850784eaa0f81713edf707e6f2e4d64eb3] mfd: axp20x: Allow the AXP803 to be probed by I2C
# possible first bad commit: [9ece3601aed46f7b460b79cd7d60908b47b2b0d4] mfd: da9063: Add support for latest DA silicon revision
# possible first bad commit: [091c6110862bce4e2380e353cb062dcb6a56bcb6] mfd: da9063: Fix revision handling to correctly select reg tables
# possible first bad commit: [a3f673d0092cee167b2a6e3d61454405d0a06b25] dt-bindings: mfd: st,stmfx: Remove I2C unit name
# possible first bad commit: [e9faaf056d2812c0b602c3dbeb5b83756b58abc5] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
# possible first bad commit: [819e42e00d2eca536d5187de21971ed345861102] mfd: motorola-cpcap: Disable interrupt for suspend
# possible first bad commit: [7d2594cd1fa0b03b2746ce811926ee150a3a14fa] mfd: smsc-ece1099: Remove driver
# possible first bad commit: [44e6171ed04a0cd0378e2503f03a444ebdd4e8e3] mfd: core: Add OF_MFD_CELL_REG() helper
# possible first bad commit: [d097965bb6682afe1f8481923b16c033f708923b] mfd: core: Fix formatting of MFD helpers
# possible first bad commit: [466a62d7642f02f36d37d9b30c19a725538a01ca] mfd: core: Make a best effort attempt to match devices with the correct of_nodes

The crash I hit while bisecting:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.8.0-rc1-00057-g44e6171ed04a (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #130 SMP Wed Oct 21 19:38:09 CEST 2020
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 16 MiB at 0xbec00000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30732 r8192 d22516 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp ip=dhcp
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2023984K/2097152K available (7168K kernel code, 496K rwdata, 1840K rodata, 1024K init, 244K bss, 56784K reserved, 16384K cma-reserved, 1294324K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x308/0x494 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000017] Switching to timer-based delay loop, resolution 41ns
[    0.000172] Console: colour dummy device 80x30
[    0.000217] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000229] pid_max: default: 32768 minimum: 301
[    0.000386] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000400] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001062] CPU: Testing write buffer coherency: ok
[    0.001349] /cpus/cpu@0 missing clock-frequency property
[    0.001368] /cpus/cpu@1 missing clock-frequency property
[    0.001383] /cpus/cpu@2 missing clock-frequency property
[    0.001399] /cpus/cpu@3 missing clock-frequency property
[    0.001409] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001887] Setting up static identity map for 0x40100000 - 0x40100060
[    0.001989] rcu: Hierarchical SRCU implementation.
[    0.002422] smp: Bringing up secondary CPUs ...
[    0.013101] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.023850] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.034552] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.034645] smp: Brought up 1 node, 4 CPUs
[    0.034664] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.034669] CPU: All CPU(s) started in HYP mode.
[    0.034674] CPU: Virtualization extensions available.
[    0.035390] devtmpfs: initialized
[    0.040028] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.040250] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.040272] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.041022] pinctrl core: initialized pinctrl subsystem
[    0.041546] thermal_sys: Registered thermal governor 'step_wise'
[    0.042208] NET: Registered protocol family 16
[    0.043383] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.044387] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.044398] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.059917] SCSI subsystem initialized
[    0.060379] usbcore: registered new interface driver usbfs
[    0.060429] usbcore: registered new interface driver hub
[    0.060482] usbcore: registered new device driver usb
[    0.060669] pps_core: LinuxPPS API ver. 1 registered
[    0.060676] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.060694] PTP clock support registered
[    0.060928] Advanced Linux Sound Architecture Driver Initialized.
[    0.061744] clocksource: Switched to clocksource arch_sys_counter
[    0.068513] NET: Registered protocol family 2
[    0.068987] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.069016] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.069088] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.069203] TCP: Hash tables configured (established 8192 bind 8192)
[    0.069315] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.069379] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.069571] NET: Registered protocol family 1
[    0.070039] RPC: Registered named UNIX socket transport module.
[    0.070050] RPC: Registered udp transport module.
[    0.070055] RPC: Registered tcp transport module.
[    0.070060] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.070287] Unpacking initramfs...
[    1.786046] Freeing initrd memory: 28264K
[    1.786927] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.788115] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[    1.794022] NFS: Registering the id_resolver key type
[    1.794066] Key type id_resolver registered
[    1.794072] Key type id_legacy registered
[    1.794179] bounce: pool size: 64 pages
[    1.794220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.794230] io scheduler mq-deadline registered
[    1.794236] io scheduler kyber registered
[    1.795136] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
[    1.796926] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    1.842477] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.848507] libphy: Fixed MDIO Bus: probed
[    1.848848] CAN device driver interface
[    1.849499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.849508] ehci-platform: EHCI generic platform driver
[    1.849827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.849845] ohci-platform: OHCI generic platform driver
[    1.851297] sun6i-rtc 1c20400.rtc: registered as rtc0
[    1.851341] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
[    1.851349] sun6i-rtc 1c20400.rtc: RTC enabled
[    1.851584] i2c /dev entries driver
[    1.853546] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.854506] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
[    1.854719] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855003] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855110] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855208] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855296] sun8i-ce 1c15000.crypto: Register cbc(aes)
[    1.855395] sun8i-ce 1c15000.crypto: Register ecb(aes)
[    1.855480] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
[    1.855569] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
[    1.855671] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
[    1.856401] usbcore: registered new interface driver usbhid
[    1.856409] usbhid: USB HID core driver
[    1.857858] NET: Registered protocol family 17
[    1.857878] can: controller area network core (rev 20170425 abi 9)
[    1.857968] NET: Registered protocol family 29
[    1.857977] can: raw protocol (rev 20170425)
[    1.857984] can: broadcast manager protocol (rev 20170425 t)
[    1.857994] can: netlink gateway (rev 20190810) max_hops=1
[    1.858189] Key type dns_resolver registered
[    1.858292] Registering SWP/SWPB emulation handler
[    1.870682] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
[    1.872535] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    1.874079] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    1.875803] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
[    1.876591] printk: console [ttyS0] disabled
[    1.896814] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 34, base_baud = 1500000) is a U6_16550A
[    2.741204] printk: console [ttyS0] enabled
[    2.745919] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    2.752732] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 198
[    2.759339] sun4i-pinctrl 1c20800.pinctrl: pin-198 (1c28c00.serial) status -517
[    2.766654] sun4i-pinctrl 1c20800.pinctrl: could not request pin 198 (PG6) from group PG6  on device 1c20800.pinctrl
[    2.777170] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    2.785711] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
[    2.792536] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
[    2.798971] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
[    2.806283] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
[    2.816625] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    2.827256] axp20x-i2c 0-0034: AXP20x variant AXP221 found
[    2.840064] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp221-pek/input/input0
[    2.858458] dcdc1: supplied by regulator-dummy
[    2.863418] vcc-3v0: Bringing 3300000uV into 3000000-3000000uV
[    2.870175] dcdc2: supplied by regulator-dummy
[    2.875268] dcdc3: supplied by regulator-dummy
[    2.880330] dcdc4: supplied by regulator-dummy
[    2.885405] dcdc5: supplied by regulator-dummy
[    2.890496] dc1sw: supplied by vcc-3v0
[    2.894460] dc5ldo: supplied by vcc-dram
[    2.898610] random: fast init done
[    2.902392] aldo1: supplied by regulator-dummy
[    2.907464] aldo2: supplied by regulator-dummy
[    2.912524] aldo3: supplied by regulator-dummy
[    2.918011] eldo1: supplied by regulator-dummy
[    2.923070] eldo2: supplied by regulator-dummy
[    2.928150] eldo3: supplied by regulator-dummy
[    2.933214] dldo1: supplied by regulator-dummy
[    2.938090] vcc-wifi-io: Bringing 700000uV into 1800000-1800000uV
[    2.945096] dldo2: supplied by regulator-dummy
[    2.949999] vcc-wifi: Bringing 700000uV into 3300000-3300000uV
[    2.956339] dldo3: supplied by regulator-dummy
[    2.961218] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV
[    2.968026] dldo4: supplied by regulator-dummy
[    2.973122] rtc_ldo: supplied by regulator-dummy
[    2.977932] ldo_io0: supplied by regulator-dummy
[    2.983183] ldo_io1: supplied by regulator-dummy
[    2.988805] axp20x-adc axp22x-adc: DMA mask not set
[    3.014035] axp20x-i2c 0-0034: failed to add MFD devices: -19
[    3.020892] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    3.027721] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 202
[    3.034406] sun4i-pinctrl 1c20800.pinctrl: pin-202 (1c20800.pinctrl:202) status -517
[    3.042743] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[    3.049527] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 160
[    3.056152] sun4i-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[    3.063204] sun4i-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0  on device 1c20800.pinctrl
[    3.073720] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[    3.081464] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    3.088260] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    3.094876] sun4i-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    3.101927] sun4i-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    3.112441] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    3.120181] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    3.126975] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    3.133504] sun4i-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    3.140458] sun4i-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    3.150885] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    3.158378] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[    3.167676] ------------[ cut here ]------------
[    3.172306] WARNING: CPU: 0 PID: 30 at lib/refcount.c:25 klist_next+0x11c/0x120
[    3.179602] refcount_t: addition on 0; use-after-free.
[    3.184729] Modules linked in:
[    3.187786] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.8.0-rc1-00057-g44e6171ed04a #130
[    3.196121] Hardware name: Allwinner sun8i Family
[    3.200828] Workqueue: events deferred_probe_work_func
[    3.205981] [<c010dcb4>] (unwind_backtrace) from [<c010a450>] (show_stack+0x10/0x14)
[    3.213720] [<c010a450>] (show_stack) from [<c03b59d8>] (dump_stack+0x98/0xac)
[    3.220938] [<c03b59d8>] (dump_stack) from [<c011d20c>] (__warn+0xbc/0xd4)
[    3.227808] [<c011d20c>] (__warn) from [<c011d2bc>] (warn_slowpath_fmt+0x98/0xbc)
[    3.235284] [<c011d2bc>] (warn_slowpath_fmt) from [<c03bacac>] (klist_next+0x11c/0x120)
[    3.243282] [<c03bacac>] (klist_next) from [<c049f224>] (device_for_each_child+0x44/0x98)
[    3.251453] [<c049f224>] (device_for_each_child) from [<c049ff00>] (device_is_dependent+0x20/0x90)
[    3.260402] [<c049ff00>] (device_is_dependent) from [<c04a19c8>] (device_link_add+0x194/0x4a8)
[    3.269007] [<c04a19c8>] (device_link_add) from [<c04173a4>] (_regulator_get+0xe4/0x268)
[    3.277093] [<c04173a4>] (_regulator_get) from [<c041a1ac>] (_devm_regulator_get+0x40/0x78)
[    3.285440] [<c041a1ac>] (_devm_regulator_get) from [<c03d22e0>] (sun4i_usb_phy_probe+0x310/0x648)
[    3.294393] [<c03d22e0>] (sun4i_usb_phy_probe) from [<c04a6c2c>] (platform_drv_probe+0x48/0x98)
[    3.303084] [<c04a6c2c>] (platform_drv_probe) from [<c04a4d50>] (really_probe+0x1e0/0x348)
[    3.311341] [<c04a4d50>] (really_probe) from [<c04a4fc4>] (driver_probe_device+0x5c/0xb4)
[    3.319511] [<c04a4fc4>] (driver_probe_device) from [<c04a31e4>] (bus_for_each_drv+0x84/0xc8)
[    3.328028] [<c04a31e4>] (bus_for_each_drv) from [<c04a4afc>] (__device_attach+0xd8/0x144)
[    3.336285] [<c04a4afc>] (__device_attach) from [<c04a3ea4>] (bus_probe_device+0x84/0x8c)
[    3.344455] [<c04a3ea4>] (bus_probe_device) from [<c04a4338>] (deferred_probe_work_func+0x64/0x90)
[    3.353406] [<c04a4338>] (deferred_probe_work_func) from [<c0136920>] (process_one_work+0x1dc/0x438)
[    3.362531] [<c0136920>] (process_one_work) from [<c0136dd8>] (worker_thread+0x25c/0x55c)
[    3.370701] [<c0136dd8>] (worker_thread) from [<c013c864>] (kthread+0x124/0x150)
[    3.378090] [<c013c864>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
[    3.385301] Exception stack(0xee979fb0 to 0xee979ff8)
[    3.390348] 9fa0:                                     00000000 00000000 00000000 00000000
[    3.398515] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.406681] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.413285] ---[ end trace a19797e8aa146b6d ]---
[    3.418023] 8<--- cut here ---
[    3.421076] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[    3.429167] pgd = (ptrval)
[    3.431879] [00000010] *pgd=00000000
[    3.435455] Internal error: Oops: 5 [#1] SMP ARM
[    3.440064] Modules linked in:
[    3.443119] CPU: 0 #
PID: 30 Comm: kworker/0:1 Tainted: G        W         5.8.0-rc1-00057-g44e6171ed04a #130
[    3.452841] Hardware name: Allwinner sun8i Family
[    3.457540] Workqueue: events deferred_probe_work_func
[    3.462671] PC is at klist_put+0x18/0xa0
[    3.466589] LR is at klist_iter_exit+0x1c/0x28
[    3.471025] pc : [<c03ba9d0>]    lr : [<c03baa7c>]    psr: a0000013
[    3.477280] sp : ee979d50  ip : 00000000  fp : c0928b64
[    3.482496] r10: 00000001  r9 : 00000001  r8 : ee330478
[    3.487712] r7 : 00000000  r6 : c049fee0  r5 : ee2c4e94  r4 : 00000000
[    3.494229] r3 : 0000000b  r2 : 779dc6f4  r1 : 00000000  r0 : 00000000
[    3.500747] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.507870] Control: 10c5387d  Table: 4000406a  DAC: 00000051
[    3.513608] Process kworker/0:1 (pid: 30, stack limit = 0x(ptrval))
[    3.519865] Stack: (0xee979d50 to 0xee97a000)
[    3.524217] 9d40:                                     ee979d74 ee330478 c049fee0 ee978000
[    3.532385] 9d60: ee330478 c03baa7c 00000000 c049f250 c083a1b0 ee928980 ee2c4e94 779dc6f4
[    3.540553] 9d80: 2e303034 00000001 ee973810 ee330478 ee973810 c049ff00 00000001 00000001
[    3.548721] 9da0: ee330478 ee973810 ee330478 c04a19c8 796c7070 ffff0a00 ee2e7000 ee330400
[    3.556889] 9dc0: 00000002 ee306300 ee973810 ee330478 00000001 00000001 c0928b64 c04173a4
[    3.565056] 9de0: ee306240 ee979e34 ee973810 00000002 ee973810 ee973800 c0928bdc c041a1ac
[    3.573224] 9e00: 00000001 00000000 ee2e6e70 ee2e6e40 ee973810 c03d22e0 00000000 00000001
[    3.581392] 9e20: c0b14ab4 0000000b 00000000 ee978000 00000000 31627375 7562765f ee000073
[    3.589560] 9e40: ee154840 779dc6f4 c0932bb0 00000000 ee973810 c0b14ab4 c0bb2884 00000000
[    3.597728] 9e60: c0b14ab4 0000000b eefb3980 c04a6c2c ee973810 c0bb287c 00000000 c0bb2884
[    3.605896] 9e80: 00000000 c04a4d50 ee973810 c0b14ab4 c04a50c4 ee978000 00000000 00000000
[    3.614064] 9ea0: 00000000 c04a4fc4 00000000 ee979ee4 c04a50c4 c04a31e4 ee971c9c ee809f6c
[    3.622232] 9ec0: eea6deb8 779dc6f4 00000000 ee973810 ee978000 00000001 ee973854 c04a4afc
[    3.630399] 9ee0: c0b4dba8 ee973810 00000001 779dc6f4 c0b4ddf0 ee973810 ee973810 c0b4e068
[    3.638567] 9f00: c0b4ddf0 c04a3ea4 ee973810 c0b4dddc c0b4dddc c04a4338 c0b4de0c ee928280
[    3.646735] 9f20: eefb3980 eefb6a00 00000000 c0136920 eefb3998 c0b03d00 ee928280 eefb3980
[    3.654903] 9f40: ee928294 eefb3998 c0b03d00 00000008 ee978000 c0136dd8 ffffe000 c0b77350
[    3.663071] 9f60: ee928280 ee8d8040 ee92b140 00000000 ee978000 c0136b7c ee928280 ee88beac
[    3.671239] 9f80: ee8d8064 c013c864 00000001 ee92b140 c013c740 00000000 00000000 00000000
[    3.679406] 9fa0: 00000000 00000000 00000000 c0100148 00000000 00000000 00000000 00000000
[    3.687573] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.695740] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    3.703910] [<c03ba9d0>] (klist_put) from [<c03baa7c>] (klist_iter_exit+0x1c/0x28)
[    3.711472] [<c03baa7c>] (klist_iter_exit) from [<c049f250>] (device_for_each_child+0x70/0x98)
[    3.720074] [<c049f250>] (device_for_each_child) from [<c049ff00>] (device_is_dependent+0x20/0x90)
[    3.729024] [<c049ff00>] (device_is_dependent) from [<c04a19c8>] (device_link_add+0x194/0x4a8)
[    3.737627] [<c04a19c8>] (device_link_add) from [<c04173a4>] (_regulator_get+0xe4/0x268)
[    3.745709] [<c04173a4>] (_regulator_get) from [<c041a1ac>] (_devm_regulator_get+0x40/0x78)
[    3.754054] [<c041a1ac>] (_devm_regulator_get) from [<c03d22e0>] (sun4i_usb_phy_probe+0x310/0x648)
[    3.763006] [<c03d22e0>] (sun4i_usb_phy_probe) from [<c04a6c2c>] (platform_drv_probe+0x48/0x98)
[    3.771697] [<c04a6c2c>] (platform_drv_probe) from [<c04a4d50>] (really_probe+0x1e0/0x348)
[    3.779954] [<c04a4d50>] (really_probe) from [<c04a4fc4>] (driver_probe_device+0x5c/0xb4)
[    3.788124] [<c04a4fc4>] (driver_probe_device) from [<c04a31e4>] (bus_for_each_drv+0x84/0xc8)
[    3.796641] [<c04a31e4>] (bus_for_each_drv) from [<c04a4afc>] (__device_attach+0xd8/0x144)
[    3.804897] [<c04a4afc>] (__device_attach) from [<c04a3ea4>] (bus_probe_device+0x84/0x8c)
[    3.813066] [<c04a3ea4>] (bus_probe_device) from [<c04a4338>] (deferred_probe_work_func+0x64/0x90)
[    3.822015] [<c04a4338>] (deferred_probe_work_func) from [<c0136920>] (process_one_work+0x1dc/0x438)
[    3.831139] [<c0136920>] (process_one_work) from [<c0136dd8>] (worker_thread+0x25c/0x55c)
[    3.839307] [<c0136dd8>] (worker_thread) from [<c013c864>] (kthread+0x124/0x150)
[    3.846696] [<c013c864>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
[    3.853905] Exception stack(0xee979fb0 to 0xee979ff8)
[    3.858950] 9fa0:                                     00000000 00000000 00000000 00000000
[    3.867117] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.875283] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.881891] Code: e5904000 e1a07001 e3c44001 e1a00004 (e5946010) 
[    3.888129] ---[ end trace a19797e8aa146b6e ]---

Regards

^ permalink raw reply	[flat|nested] 32+ messages in thread

* [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-10-21 18:31 ` Corentin Labbe
  0 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-10-21 18:31 UTC (permalink / raw)
  To: linus.walleij, mripard, wens, linux-gpio, lee.jones
  Cc: linux-kernel, linux-arm-kernel

Hello

On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 16 MiB at 0xbec00000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000176] Console: colour dummy device 80x30
[    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000251] pid_max: default: 32768 minimum: 301
[    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001117] CPU: Testing write buffer coherency: ok
[    0.001420] /cpus/cpu@0 missing clock-frequency property
[    0.001442] /cpus/cpu@1 missing clock-frequency property
[    0.001459] /cpus/cpu@2 missing clock-frequency property
[    0.001477] /cpus/cpu@3 missing clock-frequency property
[    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
[    0.002119] rcu: Hierarchical SRCU implementation.
[    0.002580] smp: Bringing up secondary CPUs ...
[    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.034880] smp: Brought up 1 node, 4 CPUs
[    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.034912] CPU: All CPU(s) started in HYP mode.
[    0.034919] CPU: Virtualization extensions available.
[    0.035754] devtmpfs: initialized
[    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.042026] pinctrl core: initialized pinctrl subsystem
[    0.043049] NET: Registered protocol family 16
[    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.045360] thermal_sys: Registered thermal governor 'step_wise'
[    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
[    0.123361] alg_test_stdrng test ansi_cprng
[    0.150327] SCSI subsystem initialized
[    0.150742] usbcore: registered new interface driver usbfs
[    0.150789] usbcore: registered new interface driver hub
[    0.150845] usbcore: registered new device driver usb
[    0.151014] mc: Linux media interface: v0.10
[    0.151049] videodev: Linux video capture interface: v2.00
[    0.151149] pps_core: LinuxPPS API ver. 1 registered
[    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.151180] PTP clock support registered
[    0.151575] Advanced Linux Sound Architecture Driver Initialized.
[    0.152420] clocksource: Switched to clocksource arch_sys_counter
[    0.159588] NET: Registered protocol family 2
[    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
[    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.160689] NET: Registered protocol family 1
[    0.161248] RPC: Registered named UNIX socket transport module.
[    0.161263] RPC: Registered udp transport module.
[    0.161272] RPC: Registered tcp transport module.
[    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.161510] Unpacking initramfs...
[    1.988543] Freeing initrd memory: 30460K
[    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[    1.996523] NFS: Registering the id_resolver key type
[    1.996573] Key type id_resolver registered
[    1.996582] Key type id_legacy registered
[    1.996659] NET: Registered protocol family 38
[    1.996725] bounce: pool size: 64 pages
[    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.996782] io scheduler mq-deadline registered
[    1.996790] io scheduler kyber registered
[    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
[    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
[    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
[    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[    2.062567] lima 1c40000.gpu: bus rate = 200000000
[    2.062584] lima 1c40000.gpu: mod rate = 297000000
[    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
[    2.071234] loop: module loaded
[    2.072785] libphy: Fixed MDIO Bus: probed
[    2.073308] CAN device driver interface
[    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.074063] ehci-platform: EHCI generic platform driver
[    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.074579] ohci-platform: OHCI generic platform driver
[    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
[    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
[    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
[    2.076673] i2c /dev entries driver
[    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
[    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
[    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
[    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
[    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
[    2.407064] random: fast init done
[    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
[    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
[    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
[    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
[    3.874269] sun8i-ce 1c15000.crypto: Register md5
[    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
[    3.980669] sun8i-ce 1c15000.crypto: Register sha1
[    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
[    4.104525] sun8i-ce 1c15000.crypto: Register sha224
[    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
[    4.323465] sun8i-ce 1c15000.crypto: Register sha256
[    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
[    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
[    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
[    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
[    4.484782] alg_test_stdrng test sun8i-ce-prng
[    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
[    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
[    4.486084] usbcore: registered new interface driver usbhid
[    4.486098] usbhid: USB HID core driver
[    4.488554] NET: Registered protocol family 17
[    4.488580] can: controller area network core
[    4.488668] NET: Registered protocol family 29
[    4.488681] can: raw protocol
[    4.488691] can: broadcast manager protocol
[    4.488705] can: netlink gateway - max_hops=1
[    4.488918] Key type dns_resolver registered
[    4.489063] Registering SWP/SWPB emulation handler
[    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
[    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
[    4.508216] printk: console [ttyS0] disabled
[    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
[    5.585887] printk: console [ttyS0] enabled
[    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
[    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
[    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
[    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
[    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
[    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
[    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
[    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
[    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
[    5.780739] vcc-3v3: supplied by regulator-dummy
[    5.786045] vdd-cpu: supplied by regulator-dummy
[    5.791332] vdd-sys: supplied by regulator-dummy
[    5.796585] dcdc4: supplied by regulator-dummy
[    5.801647] vcc-dram: supplied by regulator-dummy
[    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
[    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
[    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
[    5.828002] axp20x-adc axp22x-adc: DMA mask not set
[    5.833987] axp20x-i2c 1-0034: AXP20X driver loaded
[    5.839676] Registered IR keymap rc-empty
[    5.843800] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
[    5.850532] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1
[    5.858103] sunxi-ir 1c21800.ir: initialized sunXi IR driver
[    5.864697] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[    5.874795] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[    5.875558] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    5.876884] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    5.878097] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    5.878735] ehci-platform 1c19000.usb: EHCI Host Controller
[    5.878762] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 1
[    5.879477] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    5.925620] ehci-platform 1c19000.usb: irq 37, io mem 0x01c19000
[    5.952422] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
[    5.959298] hub 1-0:1.0: USB hub found
[    5.963115] hub 1-0:1.0: 1 port detected
[    5.968106] ehci-platform 1c1c000.usb: EHCI Host Controller
[    5.973724] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    5.981683] ehci-platform 1c1c000.usb: irq 39, io mem 0x01c1c000
[    6.012423] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    6.019222] hub 2-0:1.0: USB hub found
[    6.023042] hub 2-0:1.0: 1 port detected
[    6.027973] ohci-platform 1c19400.usb: Generic Platform OHCI controller
[    6.034626] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 3
[    6.042544] ohci-platform 1c19400.usb: irq 38, io mem 0x01c19400
[    6.117046] hub 3-0:1.0: USB hub found
[    6.120832] hub 3-0:1.0: 1 port detected
[    6.125796] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    6.132452] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    6.140346] ohci-platform 1c1c400.usb: irq 40, io mem 0x01c1c400
[    6.217070] hub 4-0:1.0: USB hub found
[    6.220858] hub 4-0:1.0: 1 port detected
[    6.225960] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.234620] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    6.244069] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.244793] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[    6.245206] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.245793] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.246659] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    6.247794] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.251915] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.297008] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    6.306355] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    6.306908] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    6.307660] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    6.307935] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[   18.812596] ALSA device list:
[   18.815569]   No soundcards found.
[   18.821014] Freeing unused kernel memory: 1024K
[   18.825777] Run /init as init process

I have bisected this issue but some (partialy unrelated) crash prevent to find the good commit:
git bisect start
# good: [3acff11cef1dece31cd29956f19181895996a7c5] regulator: gpio: Honor regulator-boot-on property
git bisect good 3acff11cef1dece31cd29956f19181895996a7c5
# bad: [6228cc8aed9e51afa56727b11001b37913e4dda6] regulator: rtmv20: Add missing regcache cache only before marked as dirty
git bisect bad 6228cc8aed9e51afa56727b11001b37913e4dda6
# good: [8186749621ed6b8fc42644c399e8c755a2b6f630] Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
git bisect good 8186749621ed6b8fc42644c399e8c755a2b6f630
# good: [60e76bb8a4e4c5398ea9053535e1fd0c9d6bb06e] Merge tag 'm68knommu-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
git bisect good 60e76bb8a4e4c5398ea9053535e1fd0c9d6bb06e
# good: [d566a9c2d482640abf5e602957b44e7b3bbe858d] perf sched: Prefer sched_waking event when it exists
git bisect good d566a9c2d482640abf5e602957b44e7b3bbe858d
# skip: [ab97a28908bff7ffdadd50da17c2b4d9a4dade86] Merge branch 'sfc-more-EF100-fixes'
git bisect skip ab97a28908bff7ffdadd50da17c2b4d9a4dade86
# bad: [335956421c86f64fd46186d76d3961f6adcff187] cxgb4: Fix work request size calculation for loopback test
git bisect bad 335956421c86f64fd46186d76d3961f6adcff187
# skip: [335956421c86f64fd46186d76d3961f6adcff187] cxgb4: Fix work request size calculation for loopback test
git bisect skip 335956421c86f64fd46186d76d3961f6adcff187
# good: [e764a1e32337aaf325fc5b14a5bbd06eabba4699] Merge branch 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
git bisect good e764a1e32337aaf325fc5b14a5bbd06eabba4699
# skip: [884e0d3dd59dde1c1f0fbb5b9db2bcdc581982c7] Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
git bisect skip 884e0d3dd59dde1c1f0fbb5b9db2bcdc581982c7
# good: [0ac10dc1888cd1a8b994f32b51f0eaeba1e803ef] Merge branch 'bpf_iter-uapi-fix'
git bisect good 0ac10dc1888cd1a8b994f32b51f0eaeba1e803ef
# good: [fc4177be963dccad73b98d7db3a8a38911f952b7] exec: restore EACCES of S_ISDIR execve()
git bisect good fc4177be963dccad73b98d7db3a8a38911f952b7
# skip: [410520d07f5c66a6c1f3eb7ef2063d9bdd3d440b] Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux
git bisect skip 410520d07f5c66a6c1f3eb7ef2063d9bdd3d440b
# good: [0f71241a8e32baf9ac290cf915bc9b3ff265f7d3] selftests/exec: add file type errno tests
git bisect good 0f71241a8e32baf9ac290cf915bc9b3ff265f7d3
# good: [638037b158df00a860251772239778a25a692b8c] NFS: Add tracepoints for layouterror and layoutstats.
git bisect good 638037b158df00a860251772239778a25a692b8c
# skip: [1195d58f003bf84d37fc5c30017600e09ba567b2] Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip 1195d58f003bf84d37fc5c30017600e09ba567b2
# skip: [6ffdcde4ee9a20beda096dec664da89002610d7d] Merge tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
git bisect skip 6ffdcde4ee9a20beda096dec664da89002610d7d
# good: [44ad23dfbccbcd26d6ca504eba1ac55755864969] libbpf: Handle BTF pointer sizes more carefully
git bisect good 44ad23dfbccbcd26d6ca504eba1ac55755864969
# skip: [eb1319af4119c4936e02c879295e9fd4d50bbe3a] Merge tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip eb1319af4119c4936e02c879295e9fd4d50bbe3a
# good: [6c357848b44b4016ca422178aa368a7472245f6f] mm: replace hpage_nr_pages with thp_nr_pages
git bisect good 6c357848b44b4016ca422178aa368a7472245f6f
# good: [2db13a9b30f7e438777eb1a462c4b055ba948b89] perf bench numa: Use numa_node_to_cpus() to bind tasks to nodes
git bisect good 2db13a9b30f7e438777eb1a462c4b055ba948b89
# skip: [713eee84720e6525bc5b65954c5087604a15f5e8] Merge tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
git bisect skip 713eee84720e6525bc5b65954c5087604a15f5e8
# good: [87bd8c2b93ae899ecd90a5e0550cdae4260cc4ca] Merge tag 'sound-fix-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
git bisect good 87bd8c2b93ae899ecd90a5e0550cdae4260cc4ca
# skip: [7f5faaaa5909bb0b26dcd309424da14bdf0c7e93] Merge tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip 7f5faaaa5909bb0b26dcd309424da14bdf0c7e93
# good: [8a8fb8977ea2bdf160b9e475cf2350abbad4f0e7] scsi: scsi_transport_sas: Add spaces around binary operator "|"
git bisect good 8a8fb8977ea2bdf160b9e475cf2350abbad4f0e7
# good: [18737f4243abe02f55ad62ad4baa04c318b48e8d] Merge branch 'akpm' (patches from Andrew)
git bisect good 18737f4243abe02f55ad62ad4baa04c318b48e8d
# good: [e8efa9b88e3c20a20ff34bb33e2e94bf6896016a] md: get sysfs entry after redundancy attr group create
git bisect good e8efa9b88e3c20a20ff34bb33e2e94bf6896016a
# good: [846f9e1fb9b9a2c4eecefa2fdbfb51e975a7d532] dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
git bisect good 846f9e1fb9b9a2c4eecefa2fdbfb51e975a7d532
# skip: [50f6c7dbd973092d8e5f3c89f29eb4bea19fdebd] Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect skip 50f6c7dbd973092d8e5f3c89f29eb4bea19fdebd
# skip: [b07175dc41babfec057f494d22a750af755297d8] Merge tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
git bisect skip b07175dc41babfec057f494d22a750af755297d8
# good: [3c4dc21b75a74d4a8458624649a3e09af399a384] perf: ftrace: Add set_tracing_options() to set all trace options
git bisect good 3c4dc21b75a74d4a8458624649a3e09af399a384
# good: [45d93065c8ec4e671f4b1ff02b5b3a633658a92f] mfd: stm32: Enable regmap fast_io for stm32-lptimer
git bisect good 45d93065c8ec4e671f4b1ff02b5b3a633658a92f
# skip: [7d2594cd1fa0b03b2746ce811926ee150a3a14fa] mfd: smsc-ece1099: Remove driver
git bisect skip 7d2594cd1fa0b03b2746ce811926ee150a3a14fa
# skip: [db06ea341fcd1752fbdb58454507faa140e3842f] sfc: really check hash is valid before using it
git bisect skip db06ea341fcd1752fbdb58454507faa140e3842f
# skip: [a3f673d0092cee167b2a6e3d61454405d0a06b25] dt-bindings: mfd: st,stmfx: Remove I2C unit name
git bisect skip a3f673d0092cee167b2a6e3d61454405d0a06b25
# good: [475f63ae63b5102ae6423d1712333929d04d6ecc] kexec_file: Correctly output debugging information for the PT_LOAD ELF header
git bisect good 475f63ae63b5102ae6423d1712333929d04d6ecc
# skip: [4ee1d9dc8073acd40f04e5fe3771a5dff978d077] mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
git bisect skip 4ee1d9dc8073acd40f04e5fe3771a5dff978d077
# good: [5c04da55c754c44937b3d19c6522f9023fd5c5d5] netfilter: ebtables: reject bogus getopt len value
git bisect good 5c04da55c754c44937b3d19c6522f9023fd5c5d5
# good: [f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade] can: j1939: fix support for multipacket broadcast message
git bisect good f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade
# good: [2ed0b7578170c3bab10cde09d4440897b305e40c] 9p: Remove unneeded cast from memory allocation
git bisect good 2ed0b7578170c3bab10cde09d4440897b305e40c
# skip: [e7b85500885f2a70129f5d3a72153e23b37d0fe5] mfd: max77693-private: Drop a duplicated word
git bisect skip e7b85500885f2a70129f5d3a72153e23b37d0fe5
# good: [51a4cc112c7a42b62a91bcccdfac42e7c4561729] io_uring: defer file table grabbing request cleanup for locked requests
git bisect good 51a4cc112c7a42b62a91bcccdfac42e7c4561729
# skip: [f6513bd39c15af8f8a63b1fbfcb1bf4717241655] Merge tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
git bisect skip f6513bd39c15af8f8a63b1fbfcb1bf4717241655
# good: [3d4a87576f3762c8c986950af157bc9025808b5c] mfd: sprd-sc27xx-spi: Fix symbol 'sprd_pmic_detect_charger_type' was not declared warning
git bisect good 3d4a87576f3762c8c986950af157bc9025808b5c
# skip: [9123e3a74ec7b934a4a099e98af6a61c2f80bbf5] Linux 5.9-rc1
git bisect skip 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5
# good: [492e4edba6e2fc0620a69266d33f29c4a1f9ac1e] perf ftrace: Make option description initials all capital letters
git bisect good 492e4edba6e2fc0620a69266d33f29c4a1f9ac1e
# skip: [e15d7f2b81d2e7d93115d46fa931b366c1cdebc2] mfd: syscon: Use a unique name with regmap_config
git bisect skip e15d7f2b81d2e7d93115d46fa931b366c1cdebc2
# skip: [06a4ec1d9dc652e17ee3ac2ceb6c7cf6c2b75cdd] Merge tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
git bisect skip 06a4ec1d9dc652e17ee3ac2ceb6c7cf6c2b75cdd
# skip: [4b6c093e21d36bede0fd88fd0aeb3b03647260e4] Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
git bisect skip 4b6c093e21d36bede0fd88fd0aeb3b03647260e4
# good: [07d88c97aef826f1ba8a5026ea30700f85433057] mfd: db8500-prcmu: Remove incorrect function header from .probe() function
git bisect good 07d88c97aef826f1ba8a5026ea30700f85433057
# good: [b35fd7422c2f8e04496f5a770bd4e1a205414b3f] block: check queue's limits.discard_granularity in __blkdev_issue_discard()
git bisect good b35fd7422c2f8e04496f5a770bd4e1a205414b3f
# good: [981b1261bfdf7cb3e3c2029ecc4a1510d46eff9e] mfd: si476x-cmd: Add missing documentation for si476x_cmd_fm_rds_status()'s arg 'report'
git bisect good 981b1261bfdf7cb3e3c2029ecc4a1510d46eff9e
# good: [7f9bf6e82461b97ce43a912cb4a959c5a41367ac] Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
git bisect good 7f9bf6e82461b97ce43a912cb4a959c5a41367ac
# good: [d58669b093997e4e5f98c38a54f99761657c19d2] ACPI: APD: Change name from ST to FCH
git bisect good d58669b093997e4e5f98c38a54f99761657c19d2
# good: [6dfdf673ccb24dccc95b342235cac3e585c5af34] sh: use the generic dma coherent remap allocator
git bisect good 6dfdf673ccb24dccc95b342235cac3e585c5af34
# good: [52416ffcf823ee11aa19792715664ab94757f111] x86/purgatory: Don't generate debug info for purgatory.ro
git bisect good 52416ffcf823ee11aa19792715664ab94757f111
# good: [09fc67b500c7f0bb1b5ed774197ac7f2c5285655] kprobes: Remove show_registers() function prototype
git bisect good 09fc67b500c7f0bb1b5ed774197ac7f2c5285655
# good: [c8c412f976124d85b8ded85c6ac3f760c12b63a3] SMB3: Fix mkdir when idsfromsid configured on mount
git bisect good c8c412f976124d85b8ded85c6ac3f760c12b63a3
# skip: [4f4ed4543e2096dc0158ff79bd6d8bc09e27fa93] mfd: Replace HTTP links with HTTPS ones
git bisect skip 4f4ed4543e2096dc0158ff79bd6d8bc09e27fa93
# good: [0bb605c2c7f2b4b314b91510810b226de7f34fa1] sh: Add SECCOMP_FILTER
git bisect good 0bb605c2c7f2b4b314b91510810b226de7f34fa1
# skip: [1a5d9dbbaf3af4d029a081bd58dc83b6a25d109e] Merge tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect skip 1a5d9dbbaf3af4d029a081bd58dc83b6a25d109e
# skip: [9cbbc451098ec1e9942886023203b2247dec94bd] sfc: take correct lock in ef100_reset()
git bisect skip 9cbbc451098ec1e9942886023203b2247dec94bd
# skip: [341323fa0eed1b201130b7af84d40fa04725c832] Merge tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect skip 341323fa0eed1b201130b7af84d40fa04725c832
# good: [46b5780688c0d825b6b8d49b267b13102bea512d] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema
git bisect good 46b5780688c0d825b6b8d49b267b13102bea512d
# skip: [819e42e00d2eca536d5187de21971ed345861102] mfd: motorola-cpcap: Disable interrupt for suspend
git bisect skip 819e42e00d2eca536d5187de21971ed345861102
# skip: [37711e5e2325535bf094bdc0a66790d659b52d5b] Merge tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
git bisect skip 37711e5e2325535bf094bdc0a66790d659b52d5b
# skip: [e9faaf056d2812c0b602c3dbeb5b83756b58abc5] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
git bisect skip e9faaf056d2812c0b602c3dbeb5b83756b58abc5
# good: [f516fb704d02fff292cb79a6ad85c56529f7c8cf] dt-bindings: Whitespace clean-ups in schema files
git bisect good f516fb704d02fff292cb79a6ad85c56529f7c8cf
# skip: [8b61fba503904acae24aeb2bd5569b4d6544d48f] macvlan: validate setting of multiple remote source MAC addresses
git bisect skip 8b61fba503904acae24aeb2bd5569b4d6544d48f
# good: [cb75c95c5262328bd4da3dd334f6826a3a34a979] Documentation/locking/locktypes: Fix a typo
git bisect good cb75c95c5262328bd4da3dd334f6826a3a34a979
# good: [d4e7cd36a90e38e0276d6ce0c20f5ccef17ec38c] io_uring: sanitize double poll handling
git bisect good d4e7cd36a90e38e0276d6ce0c20f5ccef17ec38c
# skip: [5a4fe0624687e62919a5913dc7c937fbfcf61fdc] mailmap: Add WeiXiong Liao
git bisect skip 5a4fe0624687e62919a5913dc7c937fbfcf61fdc
# good: [03dd061f0d203c3479791490d6b9359b2eaf9fec] sh: bring syscall_set_return_value in line with other architectures
git bisect good 03dd061f0d203c3479791490d6b9359b2eaf9fec
# skip: [d6bd5201f7eaa9c15ea9b0f8ff17dd7bc3b9d78f] mailmap: Restore dictionary sorting
git bisect skip d6bd5201f7eaa9c15ea9b0f8ff17dd7bc3b9d78f
# good: [ff041727e9e029845857cac41aae118ead5e261b] NFS: Don't move layouts to plh_return_segs list while in use
git bisect good ff041727e9e029845857cac41aae118ead5e261b
# skip: [e6a43910d55d09dae65772ad571d4c61e459b17a] sfc: don't free_irq()s if they were never requested
git bisect skip e6a43910d55d09dae65772ad571d4c61e459b17a
# skip: [2cc3c4b3c2e9c99e90aaf19cd801ff2c160f283c] Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
git bisect skip 2cc3c4b3c2e9c99e90aaf19cd801ff2c160f283c
# skip: [d097965bb6682afe1f8481923b16c033f708923b] mfd: core: Fix formatting of MFD helpers
git bisect skip d097965bb6682afe1f8481923b16c033f708923b
# skip: [6f6aea7e966cda5a817d091e938c2d9b52209893] parisc: fix PMD pages allocation by restoring pmd_alloc_one()
git bisect skip 6f6aea7e966cda5a817d091e938c2d9b52209893
# good: [b4487b93545214a9db8cbf32e86411677b0cca21] nfs: Fix getxattr kernel panic and memory overflow
git bisect good b4487b93545214a9db8cbf32e86411677b0cca21
# good: [8dfddfb79653df7c38a9c8c4c034f242a36acee9] net: qrtr: fix usage of idr in port assignment to socket
git bisect good 8dfddfb79653df7c38a9c8c4c034f242a36acee9
# good: [4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431] perf/x86/rapl: Fix missing psys sysfs attributes
git bisect good 4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431
# good: [7f8802f2d2ed67ffbac9264f946a52507f749e19] ACPI: APD: Add a fmw property is_raven
git bisect good 7f8802f2d2ed67ffbac9264f946a52507f749e19
# skip: [788f920a0f137baa4dbc1efdd5039c4a0a01b8d7] sfc: null out channel->rps_flow_id after freeing it
git bisect skip 788f920a0f137baa4dbc1efdd5039c4a0a01b8d7
# skip: [d84835b118ed8c14c21fa056ca54014b2eff068b] Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
git bisect skip d84835b118ed8c14c21fa056ca54014b2eff068b
# good: [563c53e73b8b6ec842828736f77e633f7b0911e9] NFS: Fix flexfiles read failover
git bisect good 563c53e73b8b6ec842828736f77e633f7b0911e9
# skip: [5bbec3cfe376ed0014d9456a9be11d5ed75d587b] Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
git bisect skip 5bbec3cfe376ed0014d9456a9be11d5ed75d587b
# good: [fe6a8fc5ed2f0081f17375ae2005718522c392c6] loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
git bisect good fe6a8fc5ed2f0081f17375ae2005718522c392c6
# good: [c1e2b8422bf946c80e832cee22b3399634f87a2c] block: fix double account of flush request's driver tag
git bisect good c1e2b8422bf946c80e832cee22b3399634f87a2c
# skip: [4cf7562190c795f1f95be6ee0d161107d0dc5d49] Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
git bisect skip 4cf7562190c795f1f95be6ee0d161107d0dc5d49
# good: [76d4467a97bd8c4bb01e810a5129c8f96d7dcbf8] riscv: Setup exception vector for nommu platform
git bisect good 76d4467a97bd8c4bb01e810a5129c8f96d7dcbf8
# skip: [cf84dc0bb40f4b41f7853f224b37954cf273ee24] mfd: rn5t618: Make restart handler atomic safe
git bisect skip cf84dc0bb40f4b41f7853f224b37954cf273ee24
# good: [76d10256a97a7cab72b123d54b766a3c17da658c] x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
git bisect good 76d10256a97a7cab72b123d54b766a3c17da658c
# skip: [29e44f4535faa71a70827af3639b5e6762d8f02a] watch_queue: Limit the number of watches a user can hold
git bisect skip 29e44f4535faa71a70827af3639b5e6762d8f02a
# good: [74f41adab0f4a61857833e1b6fa8e9ad12c251b6] perf/x86/rapl: Support multiple RAPL unit quirks
git bisect good 74f41adab0f4a61857833e1b6fa8e9ad12c251b6
# skip: [23ef2b642b85f03a109fbf5958134a5e40193dbd] mfd: da9055: pdata.h: Drop a duplicated word
git bisect skip 23ef2b642b85f03a109fbf5958134a5e40193dbd
# good: [a1bd06853ee478d37fae9435c5521e301de94c67] sched: Fix use of count for nr_running tracepoint
git bisect good a1bd06853ee478d37fae9435c5521e301de94c67
# skip: [594f1935b373019aacaff00929ae61fec0ec83a5] mfd: rn5t618: Fix caching of battery related registers
git bisect skip 594f1935b373019aacaff00929ae61fec0ec83a5
# good: [709ed1bcef12398ac1a35c149f3e582db04456c2] EDAC/ie31200: Fallback if host bridge device is already initialized
git bisect good 709ed1bcef12398ac1a35c149f3e582db04456c2
# skip: [1f0fa85c07fb53d756219cf7e6e8e77eab6e75eb] mfd: max14577: Remove redundant initialization of variable current_bits
git bisect skip 1f0fa85c07fb53d756219cf7e6e8e77eab6e75eb
# good: [5f0b06da5cde3f0a613308b89f0afea678559fdf] dt-bindings: Remove more cases of 'allOf' containing a '$ref'
git bisect good 5f0b06da5cde3f0a613308b89f0afea678559fdf
# skip: [114294d276279d6cda81f9c685452239ea89cdb8] mfd: mfd-core: Add mechanism for removal of a subset of children
git bisect skip 114294d276279d6cda81f9c685452239ea89cdb8
# skip: [466a62d7642f02f36d37d9b30c19a725538a01ca] mfd: core: Make a best effort attempt to match devices with the correct of_nodes
git bisect skip 466a62d7642f02f36d37d9b30c19a725538a01ca
# skip: [77b3ddab713a2276c789a8e1beb339ce185cebc2] mfd: madera: Improve handling of regulator unbinding
git bisect skip 77b3ddab713a2276c789a8e1beb339ce185cebc2
# good: [405fa8ac89e7aaa87282df659e525992f2639e76] futex: Convert to use the preferred 'fallthrough' macro
git bisect good 405fa8ac89e7aaa87282df659e525992f2639e76
# skip: [564de7628dab38f2d51bac2608fe1043704622b7] mfd: kempld-core: Fix 'assignment of read-only location' error
git bisect skip 564de7628dab38f2d51bac2608fe1043704622b7
# good: [19fe87fd854a92c746ac73cb91a0bebac07a4618] clk: x86: Support RV architecture
git bisect good 19fe87fd854a92c746ac73cb91a0bebac07a4618
# skip: [3d858942250820b9adc35f963a257481d6d4c81d] mfd: dln2: Run event handler loop under spinlock
git bisect skip 3d858942250820b9adc35f963a257481d6d4c81d
# good: [0c64a0dce51faa9c706fdf1f957d6f19878f4b81] sh: landisk: Add missing initialization of sh_io_port_base
git bisect good 0c64a0dce51faa9c706fdf1f957d6f19878f4b81
# skip: [85c307850784eaa0f81713edf707e6f2e4d64eb3] mfd: axp20x: Allow the AXP803 to be probed by I2C
git bisect skip 85c307850784eaa0f81713edf707e6f2e4d64eb3
# good: [bcfd218b66790243ef303c1b35ce59f786ded225] perf/x86/rapl: Add support for Intel SPR platform
git bisect good bcfd218b66790243ef303c1b35ce59f786ded225
# skip: [9ece3601aed46f7b460b79cd7d60908b47b2b0d4] mfd: da9063: Add support for latest DA silicon revision
git bisect skip 9ece3601aed46f7b460b79cd7d60908b47b2b0d4
# good: [f3db6de55e95eee6457a14912dd382a6cfc98edd] Merge branch 'pm-cpufreq'
git bisect good f3db6de55e95eee6457a14912dd382a6cfc98edd
# good: [bf2bcd6f1a8822ea45465f86d705951725883ee8] otx2_common: Use devm_kcalloc() in otx2_config_npa()
git bisect good bf2bcd6f1a8822ea45465f86d705951725883ee8
# skip: [091c6110862bce4e2380e353cb062dcb6a56bcb6] mfd: da9063: Fix revision handling to correctly select reg tables
git bisect skip 091c6110862bce4e2380e353cb062dcb6a56bcb6
# good: [a6d996cbd38b42341ad3fce74506b9fdc280e395] x86/alternatives: Acquire pte lock with interrupts enabled
git bisect good a6d996cbd38b42341ad3fce74506b9fdc280e395
# skip: [44e6171ed04a0cd0378e2503f03a444ebdd4e8e3] mfd: core: Add OF_MFD_CELL_REG() helper
git bisect skip 44e6171ed04a0cd0378e2503f03a444ebdd4e8e3
# good: [cc172ff301d8079e941a6eb31758951a6d764084] sched/debug: Fix the alignment of the show-state debug output
git bisect good cc172ff301d8079e941a6eb31758951a6d764084
# good: [f91daf565b0e272a33bd3fcd19eaebd331c5cffd] io_uring: short circuit -EAGAIN for blocking read attempt
git bisect good f91daf565b0e272a33bd3fcd19eaebd331c5cffd
# only skipped commits left to test
# possible first bad commit: [335956421c86f64fd46186d76d3961f6adcff187] cxgb4: Fix work request size calculation for loopback test
# possible first bad commit: [ab97a28908bff7ffdadd50da17c2b4d9a4dade86] Merge branch 'sfc-more-EF100-fixes'
# possible first bad commit: [e6a43910d55d09dae65772ad571d4c61e459b17a] sfc: don't free_irq()s if they were never requested
# possible first bad commit: [788f920a0f137baa4dbc1efdd5039c4a0a01b8d7] sfc: null out channel->rps_flow_id after freeing it
# possible first bad commit: [9cbbc451098ec1e9942886023203b2247dec94bd] sfc: take correct lock in ef100_reset()
# possible first bad commit: [db06ea341fcd1752fbdb58454507faa140e3842f] sfc: really check hash is valid before using it
# possible first bad commit: [8b61fba503904acae24aeb2bd5569b4d6544d48f] macvlan: validate setting of multiple remote source MAC addresses
# possible first bad commit: [06a4ec1d9dc652e17ee3ac2ceb6c7cf6c2b75cdd] Merge tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
# possible first bad commit: [4cf7562190c795f1f95be6ee0d161107d0dc5d49] Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
# possible first bad commit: [5a4fe0624687e62919a5913dc7c937fbfcf61fdc] mailmap: Add WeiXiong Liao
# possible first bad commit: [d6bd5201f7eaa9c15ea9b0f8ff17dd7bc3b9d78f] mailmap: Restore dictionary sorting
# possible first bad commit: [29e44f4535faa71a70827af3639b5e6762d8f02a] watch_queue: Limit the number of watches a user can hold
# possible first bad commit: [9123e3a74ec7b934a4a099e98af6a61c2f80bbf5] Linux 5.9-rc1
# possible first bad commit: [2cc3c4b3c2e9c99e90aaf19cd801ff2c160f283c] Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
# possible first bad commit: [6f6aea7e966cda5a817d091e938c2d9b52209893] parisc: fix PMD pages allocation by restoring pmd_alloc_one()
# possible first bad commit: [4b6c093e21d36bede0fd88fd0aeb3b03647260e4] Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
# possible first bad commit: [d84835b118ed8c14c21fa056ca54014b2eff068b] Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
# possible first bad commit: [5bbec3cfe376ed0014d9456a9be11d5ed75d587b] Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
# possible first bad commit: [713eee84720e6525bc5b65954c5087604a15f5e8] Merge tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
# possible first bad commit: [50f6c7dbd973092d8e5f3c89f29eb4bea19fdebd] Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [1195d58f003bf84d37fc5c30017600e09ba567b2] Merge tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [7f5faaaa5909bb0b26dcd309424da14bdf0c7e93] Merge tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [eb1319af4119c4936e02c879295e9fd4d50bbe3a] Merge tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
# possible first bad commit: [410520d07f5c66a6c1f3eb7ef2063d9bdd3d440b] Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux
# possible first bad commit: [f6513bd39c15af8f8a63b1fbfcb1bf4717241655] Merge tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
# possible first bad commit: [37711e5e2325535bf094bdc0a66790d659b52d5b] Merge tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
# possible first bad commit: [6ffdcde4ee9a20beda096dec664da89002610d7d] Merge tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
# possible first bad commit: [b07175dc41babfec057f494d22a750af755297d8] Merge tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
# possible first bad commit: [341323fa0eed1b201130b7af84d40fa04725c832] Merge tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
# possible first bad commit: [1a5d9dbbaf3af4d029a081bd58dc83b6a25d109e] Merge tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
# possible first bad commit: [884e0d3dd59dde1c1f0fbb5b9db2bcdc581982c7] Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
# possible first bad commit: [e15d7f2b81d2e7d93115d46fa931b366c1cdebc2] mfd: syscon: Use a unique name with regmap_config
# possible first bad commit: [4f4ed4543e2096dc0158ff79bd6d8bc09e27fa93] mfd: Replace HTTP links with HTTPS ones
# possible first bad commit: [3d858942250820b9adc35f963a257481d6d4c81d] mfd: dln2: Run event handler loop under spinlock
# possible first bad commit: [77b3ddab713a2276c789a8e1beb339ce185cebc2] mfd: madera: Improve handling of regulator unbinding
# possible first bad commit: [114294d276279d6cda81f9c685452239ea89cdb8] mfd: mfd-core: Add mechanism for removal of a subset of children
# possible first bad commit: [4ee1d9dc8073acd40f04e5fe3771a5dff978d077] mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
# possible first bad commit: [1f0fa85c07fb53d756219cf7e6e8e77eab6e75eb] mfd: max14577: Remove redundant initialization of variable current_bits
# possible first bad commit: [594f1935b373019aacaff00929ae61fec0ec83a5] mfd: rn5t618: Fix caching of battery related registers
# possible first bad commit: [e7b85500885f2a70129f5d3a72153e23b37d0fe5] mfd: max77693-private: Drop a duplicated word
# possible first bad commit: [23ef2b642b85f03a109fbf5958134a5e40193dbd] mfd: da9055: pdata.h: Drop a duplicated word
# possible first bad commit: [cf84dc0bb40f4b41f7853f224b37954cf273ee24] mfd: rn5t618: Make restart handler atomic safe
# possible first bad commit: [564de7628dab38f2d51bac2608fe1043704622b7] mfd: kempld-core: Fix 'assignment of read-only location' error
# possible first bad commit: [85c307850784eaa0f81713edf707e6f2e4d64eb3] mfd: axp20x: Allow the AXP803 to be probed by I2C
# possible first bad commit: [9ece3601aed46f7b460b79cd7d60908b47b2b0d4] mfd: da9063: Add support for latest DA silicon revision
# possible first bad commit: [091c6110862bce4e2380e353cb062dcb6a56bcb6] mfd: da9063: Fix revision handling to correctly select reg tables
# possible first bad commit: [a3f673d0092cee167b2a6e3d61454405d0a06b25] dt-bindings: mfd: st,stmfx: Remove I2C unit name
# possible first bad commit: [e9faaf056d2812c0b602c3dbeb5b83756b58abc5] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
# possible first bad commit: [819e42e00d2eca536d5187de21971ed345861102] mfd: motorola-cpcap: Disable interrupt for suspend
# possible first bad commit: [7d2594cd1fa0b03b2746ce811926ee150a3a14fa] mfd: smsc-ece1099: Remove driver
# possible first bad commit: [44e6171ed04a0cd0378e2503f03a444ebdd4e8e3] mfd: core: Add OF_MFD_CELL_REG() helper
# possible first bad commit: [d097965bb6682afe1f8481923b16c033f708923b] mfd: core: Fix formatting of MFD helpers
# possible first bad commit: [466a62d7642f02f36d37d9b30c19a725538a01ca] mfd: core: Make a best effort attempt to match devices with the correct of_nodes

The crash I hit while bisecting:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.8.0-rc1-00057-g44e6171ed04a (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #130 SMP Wed Oct 21 19:38:09 CEST 2020
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 16 MiB at 0xbec00000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30732 r8192 d22516 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp ip=dhcp
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2023984K/2097152K available (7168K kernel code, 496K rwdata, 1840K rodata, 1024K init, 244K bss, 56784K reserved, 16384K cma-reserved, 1294324K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x308/0x494 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000017] Switching to timer-based delay loop, resolution 41ns
[    0.000172] Console: colour dummy device 80x30
[    0.000217] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000229] pid_max: default: 32768 minimum: 301
[    0.000386] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000400] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001062] CPU: Testing write buffer coherency: ok
[    0.001349] /cpus/cpu@0 missing clock-frequency property
[    0.001368] /cpus/cpu@1 missing clock-frequency property
[    0.001383] /cpus/cpu@2 missing clock-frequency property
[    0.001399] /cpus/cpu@3 missing clock-frequency property
[    0.001409] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001887] Setting up static identity map for 0x40100000 - 0x40100060
[    0.001989] rcu: Hierarchical SRCU implementation.
[    0.002422] smp: Bringing up secondary CPUs ...
[    0.013101] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.023850] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.034552] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.034645] smp: Brought up 1 node, 4 CPUs
[    0.034664] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.034669] CPU: All CPU(s) started in HYP mode.
[    0.034674] CPU: Virtualization extensions available.
[    0.035390] devtmpfs: initialized
[    0.040028] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.040250] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.040272] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.041022] pinctrl core: initialized pinctrl subsystem
[    0.041546] thermal_sys: Registered thermal governor 'step_wise'
[    0.042208] NET: Registered protocol family 16
[    0.043383] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.044387] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.044398] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.059917] SCSI subsystem initialized
[    0.060379] usbcore: registered new interface driver usbfs
[    0.060429] usbcore: registered new interface driver hub
[    0.060482] usbcore: registered new device driver usb
[    0.060669] pps_core: LinuxPPS API ver. 1 registered
[    0.060676] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.060694] PTP clock support registered
[    0.060928] Advanced Linux Sound Architecture Driver Initialized.
[    0.061744] clocksource: Switched to clocksource arch_sys_counter
[    0.068513] NET: Registered protocol family 2
[    0.068987] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.069016] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.069088] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.069203] TCP: Hash tables configured (established 8192 bind 8192)
[    0.069315] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.069379] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.069571] NET: Registered protocol family 1
[    0.070039] RPC: Registered named UNIX socket transport module.
[    0.070050] RPC: Registered udp transport module.
[    0.070055] RPC: Registered tcp transport module.
[    0.070060] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.070287] Unpacking initramfs...
[    1.786046] Freeing initrd memory: 28264K
[    1.786927] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.788115] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[    1.794022] NFS: Registering the id_resolver key type
[    1.794066] Key type id_resolver registered
[    1.794072] Key type id_legacy registered
[    1.794179] bounce: pool size: 64 pages
[    1.794220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.794230] io scheduler mq-deadline registered
[    1.794236] io scheduler kyber registered
[    1.795136] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
[    1.796926] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    1.842477] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.848507] libphy: Fixed MDIO Bus: probed
[    1.848848] CAN device driver interface
[    1.849499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.849508] ehci-platform: EHCI generic platform driver
[    1.849827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.849845] ohci-platform: OHCI generic platform driver
[    1.851297] sun6i-rtc 1c20400.rtc: registered as rtc0
[    1.851341] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
[    1.851349] sun6i-rtc 1c20400.rtc: RTC enabled
[    1.851584] i2c /dev entries driver
[    1.853546] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.854506] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
[    1.854719] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855003] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855110] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855208] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[    1.855296] sun8i-ce 1c15000.crypto: Register cbc(aes)
[    1.855395] sun8i-ce 1c15000.crypto: Register ecb(aes)
[    1.855480] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
[    1.855569] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
[    1.855671] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
[    1.856401] usbcore: registered new interface driver usbhid
[    1.856409] usbhid: USB HID core driver
[    1.857858] NET: Registered protocol family 17
[    1.857878] can: controller area network core (rev 20170425 abi 9)
[    1.857968] NET: Registered protocol family 29
[    1.857977] can: raw protocol (rev 20170425)
[    1.857984] can: broadcast manager protocol (rev 20170425 t)
[    1.857994] can: netlink gateway (rev 20190810) max_hops=1
[    1.858189] Key type dns_resolver registered
[    1.858292] Registering SWP/SWPB emulation handler
[    1.870682] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
[    1.872535] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[    1.874079] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    1.875803] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
[    1.876591] printk: console [ttyS0] disabled
[    1.896814] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 34, base_baud = 1500000) is a U6_16550A
[    2.741204] printk: console [ttyS0] enabled
[    2.745919] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    2.752732] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 198
[    2.759339] sun4i-pinctrl 1c20800.pinctrl: pin-198 (1c28c00.serial) status -517
[    2.766654] sun4i-pinctrl 1c20800.pinctrl: could not request pin 198 (PG6) from group PG6  on device 1c20800.pinctrl
[    2.777170] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
[    2.785711] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
[    2.792536] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
[    2.798971] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
[    2.806283] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
[    2.816625] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
[    2.827256] axp20x-i2c 0-0034: AXP20x variant AXP221 found
[    2.840064] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp221-pek/input/input0
[    2.858458] dcdc1: supplied by regulator-dummy
[    2.863418] vcc-3v0: Bringing 3300000uV into 3000000-3000000uV
[    2.870175] dcdc2: supplied by regulator-dummy
[    2.875268] dcdc3: supplied by regulator-dummy
[    2.880330] dcdc4: supplied by regulator-dummy
[    2.885405] dcdc5: supplied by regulator-dummy
[    2.890496] dc1sw: supplied by vcc-3v0
[    2.894460] dc5ldo: supplied by vcc-dram
[    2.898610] random: fast init done
[    2.902392] aldo1: supplied by regulator-dummy
[    2.907464] aldo2: supplied by regulator-dummy
[    2.912524] aldo3: supplied by regulator-dummy
[    2.918011] eldo1: supplied by regulator-dummy
[    2.923070] eldo2: supplied by regulator-dummy
[    2.928150] eldo3: supplied by regulator-dummy
[    2.933214] dldo1: supplied by regulator-dummy
[    2.938090] vcc-wifi-io: Bringing 700000uV into 1800000-1800000uV
[    2.945096] dldo2: supplied by regulator-dummy
[    2.949999] vcc-wifi: Bringing 700000uV into 3300000-3300000uV
[    2.956339] dldo3: supplied by regulator-dummy
[    2.961218] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV
[    2.968026] dldo4: supplied by regulator-dummy
[    2.973122] rtc_ldo: supplied by regulator-dummy
[    2.977932] ldo_io0: supplied by regulator-dummy
[    2.983183] ldo_io1: supplied by regulator-dummy
[    2.988805] axp20x-adc axp22x-adc: DMA mask not set
[    3.014035] axp20x-i2c 0-0034: failed to add MFD devices: -19
[    3.020892] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    3.027721] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 202
[    3.034406] sun4i-pinctrl 1c20800.pinctrl: pin-202 (1c20800.pinctrl:202) status -517
[    3.042743] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PF regulator
[    3.049527] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 160
[    3.056152] sun4i-pinctrl 1c20800.pinctrl: pin-160 (1c0f000.mmc) status -517
[    3.063204] sun4i-pinctrl 1c20800.pinctrl: could not request pin 160 (PF0) from group PF0  on device 1c20800.pinctrl
[    3.073720] sunxi-mmc 1c0f000.mmc: Error applying setting, reverse things back
[    3.081464] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator
[    3.088260] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 192
[    3.094876] sun4i-pinctrl 1c20800.pinctrl: pin-192 (1c10000.mmc) status -517
[    3.101927] sun4i-pinctrl 1c20800.pinctrl: could not request pin 192 (PG0) from group PG0  on device 1c20800.pinctrl
[    3.112441] sunxi-mmc 1c10000.mmc: Error applying setting, reverse things back
[    3.120181] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PC regulator
[    3.126975] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 69
[    3.133504] sun4i-pinctrl 1c20800.pinctrl: pin-69 (1c11000.mmc) status -517
[    3.140458] sun4i-pinctrl 1c20800.pinctrl: could not request pin 69 (PC5) from group PC5  on device 1c20800.pinctrl
[    3.150885] sunxi-mmc 1c11000.mmc: Error applying setting, reverse things back
[    3.158378] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[    3.167676] ------------[ cut here ]------------
[    3.172306] WARNING: CPU: 0 PID: 30 at lib/refcount.c:25 klist_next+0x11c/0x120
[    3.179602] refcount_t: addition on 0; use-after-free.
[    3.184729] Modules linked in:
[    3.187786] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.8.0-rc1-00057-g44e6171ed04a #130
[    3.196121] Hardware name: Allwinner sun8i Family
[    3.200828] Workqueue: events deferred_probe_work_func
[    3.205981] [<c010dcb4>] (unwind_backtrace) from [<c010a450>] (show_stack+0x10/0x14)
[    3.213720] [<c010a450>] (show_stack) from [<c03b59d8>] (dump_stack+0x98/0xac)
[    3.220938] [<c03b59d8>] (dump_stack) from [<c011d20c>] (__warn+0xbc/0xd4)
[    3.227808] [<c011d20c>] (__warn) from [<c011d2bc>] (warn_slowpath_fmt+0x98/0xbc)
[    3.235284] [<c011d2bc>] (warn_slowpath_fmt) from [<c03bacac>] (klist_next+0x11c/0x120)
[    3.243282] [<c03bacac>] (klist_next) from [<c049f224>] (device_for_each_child+0x44/0x98)
[    3.251453] [<c049f224>] (device_for_each_child) from [<c049ff00>] (device_is_dependent+0x20/0x90)
[    3.260402] [<c049ff00>] (device_is_dependent) from [<c04a19c8>] (device_link_add+0x194/0x4a8)
[    3.269007] [<c04a19c8>] (device_link_add) from [<c04173a4>] (_regulator_get+0xe4/0x268)
[    3.277093] [<c04173a4>] (_regulator_get) from [<c041a1ac>] (_devm_regulator_get+0x40/0x78)
[    3.285440] [<c041a1ac>] (_devm_regulator_get) from [<c03d22e0>] (sun4i_usb_phy_probe+0x310/0x648)
[    3.294393] [<c03d22e0>] (sun4i_usb_phy_probe) from [<c04a6c2c>] (platform_drv_probe+0x48/0x98)
[    3.303084] [<c04a6c2c>] (platform_drv_probe) from [<c04a4d50>] (really_probe+0x1e0/0x348)
[    3.311341] [<c04a4d50>] (really_probe) from [<c04a4fc4>] (driver_probe_device+0x5c/0xb4)
[    3.319511] [<c04a4fc4>] (driver_probe_device) from [<c04a31e4>] (bus_for_each_drv+0x84/0xc8)
[    3.328028] [<c04a31e4>] (bus_for_each_drv) from [<c04a4afc>] (__device_attach+0xd8/0x144)
[    3.336285] [<c04a4afc>] (__device_attach) from [<c04a3ea4>] (bus_probe_device+0x84/0x8c)
[    3.344455] [<c04a3ea4>] (bus_probe_device) from [<c04a4338>] (deferred_probe_work_func+0x64/0x90)
[    3.353406] [<c04a4338>] (deferred_probe_work_func) from [<c0136920>] (process_one_work+0x1dc/0x438)
[    3.362531] [<c0136920>] (process_one_work) from [<c0136dd8>] (worker_thread+0x25c/0x55c)
[    3.370701] [<c0136dd8>] (worker_thread) from [<c013c864>] (kthread+0x124/0x150)
[    3.378090] [<c013c864>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
[    3.385301] Exception stack(0xee979fb0 to 0xee979ff8)
[    3.390348] 9fa0:                                     00000000 00000000 00000000 00000000
[    3.398515] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.406681] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.413285] ---[ end trace a19797e8aa146b6d ]---
[    3.418023] 8<--- cut here ---
[    3.421076] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[    3.429167] pgd = (ptrval)
[    3.431879] [00000010] *pgd=00000000
[    3.435455] Internal error: Oops: 5 [#1] SMP ARM
[    3.440064] Modules linked in:
[    3.443119] CPU: 0 #
PID: 30 Comm: kworker/0:1 Tainted: G        W         5.8.0-rc1-00057-g44e6171ed04a #130
[    3.452841] Hardware name: Allwinner sun8i Family
[    3.457540] Workqueue: events deferred_probe_work_func
[    3.462671] PC is at klist_put+0x18/0xa0
[    3.466589] LR is at klist_iter_exit+0x1c/0x28
[    3.471025] pc : [<c03ba9d0>]    lr : [<c03baa7c>]    psr: a0000013
[    3.477280] sp : ee979d50  ip : 00000000  fp : c0928b64
[    3.482496] r10: 00000001  r9 : 00000001  r8 : ee330478
[    3.487712] r7 : 00000000  r6 : c049fee0  r5 : ee2c4e94  r4 : 00000000
[    3.494229] r3 : 0000000b  r2 : 779dc6f4  r1 : 00000000  r0 : 00000000
[    3.500747] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.507870] Control: 10c5387d  Table: 4000406a  DAC: 00000051
[    3.513608] Process kworker/0:1 (pid: 30, stack limit = 0x(ptrval))
[    3.519865] Stack: (0xee979d50 to 0xee97a000)
[    3.524217] 9d40:                                     ee979d74 ee330478 c049fee0 ee978000
[    3.532385] 9d60: ee330478 c03baa7c 00000000 c049f250 c083a1b0 ee928980 ee2c4e94 779dc6f4
[    3.540553] 9d80: 2e303034 00000001 ee973810 ee330478 ee973810 c049ff00 00000001 00000001
[    3.548721] 9da0: ee330478 ee973810 ee330478 c04a19c8 796c7070 ffff0a00 ee2e7000 ee330400
[    3.556889] 9dc0: 00000002 ee306300 ee973810 ee330478 00000001 00000001 c0928b64 c04173a4
[    3.565056] 9de0: ee306240 ee979e34 ee973810 00000002 ee973810 ee973800 c0928bdc c041a1ac
[    3.573224] 9e00: 00000001 00000000 ee2e6e70 ee2e6e40 ee973810 c03d22e0 00000000 00000001
[    3.581392] 9e20: c0b14ab4 0000000b 00000000 ee978000 00000000 31627375 7562765f ee000073
[    3.589560] 9e40: ee154840 779dc6f4 c0932bb0 00000000 ee973810 c0b14ab4 c0bb2884 00000000
[    3.597728] 9e60: c0b14ab4 0000000b eefb3980 c04a6c2c ee973810 c0bb287c 00000000 c0bb2884
[    3.605896] 9e80: 00000000 c04a4d50 ee973810 c0b14ab4 c04a50c4 ee978000 00000000 00000000
[    3.614064] 9ea0: 00000000 c04a4fc4 00000000 ee979ee4 c04a50c4 c04a31e4 ee971c9c ee809f6c
[    3.622232] 9ec0: eea6deb8 779dc6f4 00000000 ee973810 ee978000 00000001 ee973854 c04a4afc
[    3.630399] 9ee0: c0b4dba8 ee973810 00000001 779dc6f4 c0b4ddf0 ee973810 ee973810 c0b4e068
[    3.638567] 9f00: c0b4ddf0 c04a3ea4 ee973810 c0b4dddc c0b4dddc c04a4338 c0b4de0c ee928280
[    3.646735] 9f20: eefb3980 eefb6a00 00000000 c0136920 eefb3998 c0b03d00 ee928280 eefb3980
[    3.654903] 9f40: ee928294 eefb3998 c0b03d00 00000008 ee978000 c0136dd8 ffffe000 c0b77350
[    3.663071] 9f60: ee928280 ee8d8040 ee92b140 00000000 ee978000 c0136b7c ee928280 ee88beac
[    3.671239] 9f80: ee8d8064 c013c864 00000001 ee92b140 c013c740 00000000 00000000 00000000
[    3.679406] 9fa0: 00000000 00000000 00000000 c0100148 00000000 00000000 00000000 00000000
[    3.687573] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.695740] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    3.703910] [<c03ba9d0>] (klist_put) from [<c03baa7c>] (klist_iter_exit+0x1c/0x28)
[    3.711472] [<c03baa7c>] (klist_iter_exit) from [<c049f250>] (device_for_each_child+0x70/0x98)
[    3.720074] [<c049f250>] (device_for_each_child) from [<c049ff00>] (device_is_dependent+0x20/0x90)
[    3.729024] [<c049ff00>] (device_is_dependent) from [<c04a19c8>] (device_link_add+0x194/0x4a8)
[    3.737627] [<c04a19c8>] (device_link_add) from [<c04173a4>] (_regulator_get+0xe4/0x268)
[    3.745709] [<c04173a4>] (_regulator_get) from [<c041a1ac>] (_devm_regulator_get+0x40/0x78)
[    3.754054] [<c041a1ac>] (_devm_regulator_get) from [<c03d22e0>] (sun4i_usb_phy_probe+0x310/0x648)
[    3.763006] [<c03d22e0>] (sun4i_usb_phy_probe) from [<c04a6c2c>] (platform_drv_probe+0x48/0x98)
[    3.771697] [<c04a6c2c>] (platform_drv_probe) from [<c04a4d50>] (really_probe+0x1e0/0x348)
[    3.779954] [<c04a4d50>] (really_probe) from [<c04a4fc4>] (driver_probe_device+0x5c/0xb4)
[    3.788124] [<c04a4fc4>] (driver_probe_device) from [<c04a31e4>] (bus_for_each_drv+0x84/0xc8)
[    3.796641] [<c04a31e4>] (bus_for_each_drv) from [<c04a4afc>] (__device_attach+0xd8/0x144)
[    3.804897] [<c04a4afc>] (__device_attach) from [<c04a3ea4>] (bus_probe_device+0x84/0x8c)
[    3.813066] [<c04a3ea4>] (bus_probe_device) from [<c04a4338>] (deferred_probe_work_func+0x64/0x90)
[    3.822015] [<c04a4338>] (deferred_probe_work_func) from [<c0136920>] (process_one_work+0x1dc/0x438)
[    3.831139] [<c0136920>] (process_one_work) from [<c0136dd8>] (worker_thread+0x25c/0x55c)
[    3.839307] [<c0136dd8>] (worker_thread) from [<c013c864>] (kthread+0x124/0x150)
[    3.846696] [<c013c864>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
[    3.853905] Exception stack(0xee979fb0 to 0xee979ff8)
[    3.858950] 9fa0:                                     00000000 00000000 00000000 00000000
[    3.867117] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.875283] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.881891] Code: e5904000 e1a07001 e3c44001 e1a00004 (e5946010) 
[    3.888129] ---[ end trace a19797e8aa146b6e ]---

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-10-21 18:31 ` Corentin Labbe
@ 2020-10-23 13:42   ` Corentin Labbe
  -1 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-10-23 13:42 UTC (permalink / raw)
  To: linus.walleij, mripard, wens, linux-gpio, lee.jones
  Cc: linux-kernel, linux-arm-kernel

On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> Hello
> 
> On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> [    0.000000] CPU: div instructions available: patching division code
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> [    0.000000] Memory policy: Data cache writealloc
> [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> [    0.000000] Zone ranges:
> [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> [    0.000000] psci: probing for conduit method from DT.
> [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.000000] rcu: Hierarchical RCU implementation.
> [    0.000000] rcu: 	RCU event tracing is enabled.
> [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [    0.000000] GIC: Using split EOI/Deactivate mode
> [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> [    0.000020] Switching to timer-based delay loop, resolution 41ns
> [    0.000176] Console: colour dummy device 80x30
> [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> [    0.000251] pid_max: default: 32768 minimum: 301
> [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [    0.001117] CPU: Testing write buffer coherency: ok
> [    0.001420] /cpus/cpu@0 missing clock-frequency property
> [    0.001442] /cpus/cpu@1 missing clock-frequency property
> [    0.001459] /cpus/cpu@2 missing clock-frequency property
> [    0.001477] /cpus/cpu@3 missing clock-frequency property
> [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> [    0.002119] rcu: Hierarchical SRCU implementation.
> [    0.002580] smp: Bringing up secondary CPUs ...
> [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> [    0.034880] smp: Brought up 1 node, 4 CPUs
> [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> [    0.034912] CPU: All CPU(s) started in HYP mode.
> [    0.034919] CPU: Virtualization extensions available.
> [    0.035754] devtmpfs: initialized
> [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> [    0.042026] pinctrl core: initialized pinctrl subsystem
> [    0.043049] NET: Registered protocol family 16
> [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> [    0.123361] alg_test_stdrng test ansi_cprng
> [    0.150327] SCSI subsystem initialized
> [    0.150742] usbcore: registered new interface driver usbfs
> [    0.150789] usbcore: registered new interface driver hub
> [    0.150845] usbcore: registered new device driver usb
> [    0.151014] mc: Linux media interface: v0.10
> [    0.151049] videodev: Linux video capture interface: v2.00
> [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [    0.151180] PTP clock support registered
> [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> [    0.159588] NET: Registered protocol family 2
> [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> [    0.160689] NET: Registered protocol family 1
> [    0.161248] RPC: Registered named UNIX socket transport module.
> [    0.161263] RPC: Registered udp transport module.
> [    0.161272] RPC: Registered tcp transport module.
> [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.161510] Unpacking initramfs...
> [    1.988543] Freeing initrd memory: 30460K
> [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> [    1.996523] NFS: Registering the id_resolver key type
> [    1.996573] Key type id_resolver registered
> [    1.996582] Key type id_legacy registered
> [    1.996659] NET: Registered protocol family 38
> [    1.996725] bounce: pool size: 64 pages
> [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [    1.996782] io scheduler mq-deadline registered
> [    1.996790] io scheduler kyber registered
> [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> [    2.071234] loop: module loaded
> [    2.072785] libphy: Fixed MDIO Bus: probed
> [    2.073308] CAN device driver interface
> [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    2.074063] ehci-platform: EHCI generic platform driver
> [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    2.074579] ohci-platform: OHCI generic platform driver
> [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> [    2.076673] i2c /dev entries driver
> [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> [    2.407064] random: fast init done
> [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> [    4.484782] alg_test_stdrng test sun8i-ce-prng
> [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> [    4.486084] usbcore: registered new interface driver usbhid
> [    4.486098] usbhid: USB HID core driver
> [    4.488554] NET: Registered protocol family 17
> [    4.488580] can: controller area network core
> [    4.488668] NET: Registered protocol family 29
> [    4.488681] can: raw protocol
> [    4.488691] can: broadcast manager protocol
> [    4.488705] can: netlink gateway - max_hops=1
> [    4.488918] Key type dns_resolver registered
> [    4.489063] Registering SWP/SWPB emulation handler
> [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> [    4.508216] printk: console [ttyS0] disabled
> [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> [    5.585887] printk: console [ttyS0] enabled
> [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> [    5.780739] vcc-3v3: supplied by regulator-dummy
> [    5.786045] vdd-cpu: supplied by regulator-dummy
> [    5.791332] vdd-sys: supplied by regulator-dummy
> [    5.796585] dcdc4: supplied by regulator-dummy
> [    5.801647] vcc-dram: supplied by regulator-dummy
> [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22

I have just saw thoses 3 lines which are probably the real problem.
I have started a new bisect with this error, but it is hitting the same "crash range" the first one.

Regards

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-10-23 13:42   ` Corentin Labbe
  0 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-10-23 13:42 UTC (permalink / raw)
  To: linus.walleij, mripard, wens, linux-gpio, lee.jones
  Cc: linux-kernel, linux-arm-kernel

On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> Hello
> 
> On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> [    0.000000] CPU: div instructions available: patching division code
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> [    0.000000] Memory policy: Data cache writealloc
> [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> [    0.000000] Zone ranges:
> [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> [    0.000000] psci: probing for conduit method from DT.
> [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.000000] rcu: Hierarchical RCU implementation.
> [    0.000000] rcu: 	RCU event tracing is enabled.
> [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [    0.000000] GIC: Using split EOI/Deactivate mode
> [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> [    0.000020] Switching to timer-based delay loop, resolution 41ns
> [    0.000176] Console: colour dummy device 80x30
> [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> [    0.000251] pid_max: default: 32768 minimum: 301
> [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [    0.001117] CPU: Testing write buffer coherency: ok
> [    0.001420] /cpus/cpu@0 missing clock-frequency property
> [    0.001442] /cpus/cpu@1 missing clock-frequency property
> [    0.001459] /cpus/cpu@2 missing clock-frequency property
> [    0.001477] /cpus/cpu@3 missing clock-frequency property
> [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> [    0.002119] rcu: Hierarchical SRCU implementation.
> [    0.002580] smp: Bringing up secondary CPUs ...
> [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> [    0.034880] smp: Brought up 1 node, 4 CPUs
> [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> [    0.034912] CPU: All CPU(s) started in HYP mode.
> [    0.034919] CPU: Virtualization extensions available.
> [    0.035754] devtmpfs: initialized
> [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> [    0.042026] pinctrl core: initialized pinctrl subsystem
> [    0.043049] NET: Registered protocol family 16
> [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> [    0.123361] alg_test_stdrng test ansi_cprng
> [    0.150327] SCSI subsystem initialized
> [    0.150742] usbcore: registered new interface driver usbfs
> [    0.150789] usbcore: registered new interface driver hub
> [    0.150845] usbcore: registered new device driver usb
> [    0.151014] mc: Linux media interface: v0.10
> [    0.151049] videodev: Linux video capture interface: v2.00
> [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [    0.151180] PTP clock support registered
> [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> [    0.159588] NET: Registered protocol family 2
> [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> [    0.160689] NET: Registered protocol family 1
> [    0.161248] RPC: Registered named UNIX socket transport module.
> [    0.161263] RPC: Registered udp transport module.
> [    0.161272] RPC: Registered tcp transport module.
> [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.161510] Unpacking initramfs...
> [    1.988543] Freeing initrd memory: 30460K
> [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> [    1.996523] NFS: Registering the id_resolver key type
> [    1.996573] Key type id_resolver registered
> [    1.996582] Key type id_legacy registered
> [    1.996659] NET: Registered protocol family 38
> [    1.996725] bounce: pool size: 64 pages
> [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [    1.996782] io scheduler mq-deadline registered
> [    1.996790] io scheduler kyber registered
> [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> [    2.071234] loop: module loaded
> [    2.072785] libphy: Fixed MDIO Bus: probed
> [    2.073308] CAN device driver interface
> [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    2.074063] ehci-platform: EHCI generic platform driver
> [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    2.074579] ohci-platform: OHCI generic platform driver
> [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> [    2.076673] i2c /dev entries driver
> [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> [    2.407064] random: fast init done
> [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> [    4.484782] alg_test_stdrng test sun8i-ce-prng
> [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> [    4.486084] usbcore: registered new interface driver usbhid
> [    4.486098] usbhid: USB HID core driver
> [    4.488554] NET: Registered protocol family 17
> [    4.488580] can: controller area network core
> [    4.488668] NET: Registered protocol family 29
> [    4.488681] can: raw protocol
> [    4.488691] can: broadcast manager protocol
> [    4.488705] can: netlink gateway - max_hops=1
> [    4.488918] Key type dns_resolver registered
> [    4.489063] Registering SWP/SWPB emulation handler
> [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> [    4.508216] printk: console [ttyS0] disabled
> [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> [    5.585887] printk: console [ttyS0] enabled
> [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> [    5.780739] vcc-3v3: supplied by regulator-dummy
> [    5.786045] vdd-cpu: supplied by regulator-dummy
> [    5.791332] vdd-sys: supplied by regulator-dummy
> [    5.796585] dcdc4: supplied by regulator-dummy
> [    5.801647] vcc-dram: supplied by regulator-dummy
> [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22

I have just saw thoses 3 lines which are probably the real problem.
I have started a new bisect with this error, but it is hitting the same "crash range" the first one.

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-10-23 13:42   ` Corentin Labbe
@ 2020-10-23 20:39     ` Corentin Labbe
  -1 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-10-23 20:39 UTC (permalink / raw)
  To: mripard, wens, mirq-linux, broonie, lgirdwood
  Cc: linux-kernel, linux-arm-kernel

On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > Hello
> > 
> > On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> > [    0.000000] Booting Linux on physical CPU 0x0
> > [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> > [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> > [    0.000000] CPU: div instructions available: patching division code
> > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> > [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> > [    0.000000] Memory policy: Data cache writealloc
> > [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> > [    0.000000] Zone ranges:
> > [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> > [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> > [    0.000000] Movable zone start for each node
> > [    0.000000] Early memory node ranges
> > [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> > [    0.000000] psci: probing for conduit method from DT.
> > [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> > [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> > [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> > [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > [    0.000000] rcu: Hierarchical RCU implementation.
> > [    0.000000] rcu: 	RCU event tracing is enabled.
> > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > [    0.000000] GIC: Using split EOI/Deactivate mode
> > [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> > [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> > [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> > [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > [    0.000020] Switching to timer-based delay loop, resolution 41ns
> > [    0.000176] Console: colour dummy device 80x30
> > [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > [    0.000251] pid_max: default: 32768 minimum: 301
> > [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > [    0.001117] CPU: Testing write buffer coherency: ok
> > [    0.001420] /cpus/cpu@0 missing clock-frequency property
> > [    0.001442] /cpus/cpu@1 missing clock-frequency property
> > [    0.001459] /cpus/cpu@2 missing clock-frequency property
> > [    0.001477] /cpus/cpu@3 missing clock-frequency property
> > [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> > [    0.002119] rcu: Hierarchical SRCU implementation.
> > [    0.002580] smp: Bringing up secondary CPUs ...
> > [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> > [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> > [    0.034880] smp: Brought up 1 node, 4 CPUs
> > [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> > [    0.034912] CPU: All CPU(s) started in HYP mode.
> > [    0.034919] CPU: Virtualization extensions available.
> > [    0.035754] devtmpfs: initialized
> > [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> > [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> > [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> > [    0.042026] pinctrl core: initialized pinctrl subsystem
> > [    0.043049] NET: Registered protocol family 16
> > [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> > [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> > [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> > [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> > [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> > [    0.123361] alg_test_stdrng test ansi_cprng
> > [    0.150327] SCSI subsystem initialized
> > [    0.150742] usbcore: registered new interface driver usbfs
> > [    0.150789] usbcore: registered new interface driver hub
> > [    0.150845] usbcore: registered new device driver usb
> > [    0.151014] mc: Linux media interface: v0.10
> > [    0.151049] videodev: Linux video capture interface: v2.00
> > [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> > [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > [    0.151180] PTP clock support registered
> > [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> > [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> > [    0.159588] NET: Registered protocol family 2
> > [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> > [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> > [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> > [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> > [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> > [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> > [    0.160689] NET: Registered protocol family 1
> > [    0.161248] RPC: Registered named UNIX socket transport module.
> > [    0.161263] RPC: Registered udp transport module.
> > [    0.161272] RPC: Registered tcp transport module.
> > [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [    0.161510] Unpacking initramfs...
> > [    1.988543] Freeing initrd memory: 30460K
> > [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> > [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> > [    1.996523] NFS: Registering the id_resolver key type
> > [    1.996573] Key type id_resolver registered
> > [    1.996582] Key type id_legacy registered
> > [    1.996659] NET: Registered protocol family 38
> > [    1.996725] bounce: pool size: 64 pages
> > [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> > [    1.996782] io scheduler mq-deadline registered
> > [    1.996790] io scheduler kyber registered
> > [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> > [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> > [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> > [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> > [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> > [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> > [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> > [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> > [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> > [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> > [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> > [    2.071234] loop: module loaded
> > [    2.072785] libphy: Fixed MDIO Bus: probed
> > [    2.073308] CAN device driver interface
> > [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [    2.074063] ehci-platform: EHCI generic platform driver
> > [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [    2.074579] ohci-platform: OHCI generic platform driver
> > [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> > [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> > [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> > [    2.076673] i2c /dev entries driver
> > [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> > [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> > [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> > [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> > [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> > [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> > [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> > [    2.407064] random: fast init done
> > [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> > [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> > [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> > [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> > [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> > [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> > [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> > [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> > [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> > [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> > [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> > [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> > [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> > [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> > [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> > [    4.484782] alg_test_stdrng test sun8i-ce-prng
> > [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> > [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> > [    4.486084] usbcore: registered new interface driver usbhid
> > [    4.486098] usbhid: USB HID core driver
> > [    4.488554] NET: Registered protocol family 17
> > [    4.488580] can: controller area network core
> > [    4.488668] NET: Registered protocol family 29
> > [    4.488681] can: raw protocol
> > [    4.488691] can: broadcast manager protocol
> > [    4.488705] can: netlink gateway - max_hops=1
> > [    4.488918] Key type dns_resolver registered
> > [    4.489063] Registering SWP/SWPB emulation handler
> > [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> > [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> > [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> > [    4.508216] printk: console [ttyS0] disabled
> > [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> > [    5.585887] printk: console [ttyS0] enabled
> > [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> > [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> > [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> > [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> > [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> > [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> > [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> > [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> > [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> > [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> > [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> > [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> > [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> > [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> > [    5.780739] vcc-3v3: supplied by regulator-dummy
> > [    5.786045] vdd-cpu: supplied by regulator-dummy
> > [    5.791332] vdd-sys: supplied by regulator-dummy
> > [    5.796585] dcdc4: supplied by regulator-dummy
> > [    5.801647] vcc-dram: supplied by regulator-dummy
> > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> 
> I have just saw thoses 3 lines which are probably the real problem.
> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> 

I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
Reverting this fix my problem.


^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-10-23 20:39     ` Corentin Labbe
  0 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-10-23 20:39 UTC (permalink / raw)
  To: mripard, wens, mirq-linux, broonie, lgirdwood
  Cc: linux-kernel, linux-arm-kernel

On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > Hello
> > 
> > On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> > [    0.000000] Booting Linux on physical CPU 0x0
> > [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> > [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> > [    0.000000] CPU: div instructions available: patching division code
> > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> > [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> > [    0.000000] Memory policy: Data cache writealloc
> > [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> > [    0.000000] Zone ranges:
> > [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> > [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> > [    0.000000] Movable zone start for each node
> > [    0.000000] Early memory node ranges
> > [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> > [    0.000000] psci: probing for conduit method from DT.
> > [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> > [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> > [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> > [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > [    0.000000] rcu: Hierarchical RCU implementation.
> > [    0.000000] rcu: 	RCU event tracing is enabled.
> > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > [    0.000000] GIC: Using split EOI/Deactivate mode
> > [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> > [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> > [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> > [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > [    0.000020] Switching to timer-based delay loop, resolution 41ns
> > [    0.000176] Console: colour dummy device 80x30
> > [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > [    0.000251] pid_max: default: 32768 minimum: 301
> > [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > [    0.001117] CPU: Testing write buffer coherency: ok
> > [    0.001420] /cpus/cpu@0 missing clock-frequency property
> > [    0.001442] /cpus/cpu@1 missing clock-frequency property
> > [    0.001459] /cpus/cpu@2 missing clock-frequency property
> > [    0.001477] /cpus/cpu@3 missing clock-frequency property
> > [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> > [    0.002119] rcu: Hierarchical SRCU implementation.
> > [    0.002580] smp: Bringing up secondary CPUs ...
> > [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> > [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> > [    0.034880] smp: Brought up 1 node, 4 CPUs
> > [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> > [    0.034912] CPU: All CPU(s) started in HYP mode.
> > [    0.034919] CPU: Virtualization extensions available.
> > [    0.035754] devtmpfs: initialized
> > [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> > [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> > [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> > [    0.042026] pinctrl core: initialized pinctrl subsystem
> > [    0.043049] NET: Registered protocol family 16
> > [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> > [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> > [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> > [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> > [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> > [    0.123361] alg_test_stdrng test ansi_cprng
> > [    0.150327] SCSI subsystem initialized
> > [    0.150742] usbcore: registered new interface driver usbfs
> > [    0.150789] usbcore: registered new interface driver hub
> > [    0.150845] usbcore: registered new device driver usb
> > [    0.151014] mc: Linux media interface: v0.10
> > [    0.151049] videodev: Linux video capture interface: v2.00
> > [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> > [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > [    0.151180] PTP clock support registered
> > [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> > [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> > [    0.159588] NET: Registered protocol family 2
> > [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> > [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> > [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> > [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> > [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> > [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> > [    0.160689] NET: Registered protocol family 1
> > [    0.161248] RPC: Registered named UNIX socket transport module.
> > [    0.161263] RPC: Registered udp transport module.
> > [    0.161272] RPC: Registered tcp transport module.
> > [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [    0.161510] Unpacking initramfs...
> > [    1.988543] Freeing initrd memory: 30460K
> > [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> > [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> > [    1.996523] NFS: Registering the id_resolver key type
> > [    1.996573] Key type id_resolver registered
> > [    1.996582] Key type id_legacy registered
> > [    1.996659] NET: Registered protocol family 38
> > [    1.996725] bounce: pool size: 64 pages
> > [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> > [    1.996782] io scheduler mq-deadline registered
> > [    1.996790] io scheduler kyber registered
> > [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> > [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> > [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> > [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> > [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> > [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> > [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> > [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> > [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> > [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> > [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> > [    2.071234] loop: module loaded
> > [    2.072785] libphy: Fixed MDIO Bus: probed
> > [    2.073308] CAN device driver interface
> > [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [    2.074063] ehci-platform: EHCI generic platform driver
> > [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [    2.074579] ohci-platform: OHCI generic platform driver
> > [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> > [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> > [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> > [    2.076673] i2c /dev entries driver
> > [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> > [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> > [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> > [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> > [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> > [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> > [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> > [    2.407064] random: fast init done
> > [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> > [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> > [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> > [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> > [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> > [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> > [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> > [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> > [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> > [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> > [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> > [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> > [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> > [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> > [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> > [    4.484782] alg_test_stdrng test sun8i-ce-prng
> > [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> > [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> > [    4.486084] usbcore: registered new interface driver usbhid
> > [    4.486098] usbhid: USB HID core driver
> > [    4.488554] NET: Registered protocol family 17
> > [    4.488580] can: controller area network core
> > [    4.488668] NET: Registered protocol family 29
> > [    4.488681] can: raw protocol
> > [    4.488691] can: broadcast manager protocol
> > [    4.488705] can: netlink gateway - max_hops=1
> > [    4.488918] Key type dns_resolver registered
> > [    4.489063] Registering SWP/SWPB emulation handler
> > [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> > [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> > [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> > [    4.508216] printk: console [ttyS0] disabled
> > [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> > [    5.585887] printk: console [ttyS0] enabled
> > [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> > [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> > [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> > [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> > [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> > [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> > [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> > [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> > [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> > [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> > [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> > [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> > [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> > [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> > [    5.780739] vcc-3v3: supplied by regulator-dummy
> > [    5.786045] vdd-cpu: supplied by regulator-dummy
> > [    5.791332] vdd-sys: supplied by regulator-dummy
> > [    5.796585] dcdc4: supplied by regulator-dummy
> > [    5.801647] vcc-dram: supplied by regulator-dummy
> > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> 
> I have just saw thoses 3 lines which are probably the real problem.
> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> 

I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
Reverting this fix my problem.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-10-23 20:39     ` Corentin Labbe
@ 2020-10-24 11:40       ` Michał Miosław
  -1 siblings, 0 replies; 32+ messages in thread
From: Michał Miosław @ 2020-10-24 11:40 UTC (permalink / raw)
  To: Corentin Labbe
  Cc: mripard, wens, broonie, lgirdwood, linux-kernel, linux-arm-kernel

On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > Hello
> > > 
> > > On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> > > [    0.000000] Booting Linux on physical CPU 0x0
> > > [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> > > [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> > > [    0.000000] CPU: div instructions available: patching division code
> > > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> > > [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> > > [    0.000000] Memory policy: Data cache writealloc
> > > [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> > > [    0.000000] Zone ranges:
> > > [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> > > [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> > > [    0.000000] Movable zone start for each node
> > > [    0.000000] Early memory node ranges
> > > [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] psci: probing for conduit method from DT.
> > > [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> > > [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> > > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> > > [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> > > [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > > [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > > [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> > > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > > [    0.000000] rcu: Hierarchical RCU implementation.
> > > [    0.000000] rcu: 	RCU event tracing is enabled.
> > > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> > > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > > [    0.000000] GIC: Using split EOI/Deactivate mode
> > > [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> > > [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> > > [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> > > [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > > [    0.000020] Switching to timer-based delay loop, resolution 41ns
> > > [    0.000176] Console: colour dummy device 80x30
> > > [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > > [    0.000251] pid_max: default: 32768 minimum: 301
> > > [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.001117] CPU: Testing write buffer coherency: ok
> > > [    0.001420] /cpus/cpu@0 missing clock-frequency property
> > > [    0.001442] /cpus/cpu@1 missing clock-frequency property
> > > [    0.001459] /cpus/cpu@2 missing clock-frequency property
> > > [    0.001477] /cpus/cpu@3 missing clock-frequency property
> > > [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > > [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> > > [    0.002119] rcu: Hierarchical SRCU implementation.
> > > [    0.002580] smp: Bringing up secondary CPUs ...
> > > [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > > [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> > > [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> > > [    0.034880] smp: Brought up 1 node, 4 CPUs
> > > [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> > > [    0.034912] CPU: All CPU(s) started in HYP mode.
> > > [    0.034919] CPU: Virtualization extensions available.
> > > [    0.035754] devtmpfs: initialized
> > > [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> > > [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> > > [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> > > [    0.042026] pinctrl core: initialized pinctrl subsystem
> > > [    0.043049] NET: Registered protocol family 16
> > > [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> > > [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> > > [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> > > [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> > > [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> > > [    0.123361] alg_test_stdrng test ansi_cprng
> > > [    0.150327] SCSI subsystem initialized
> > > [    0.150742] usbcore: registered new interface driver usbfs
> > > [    0.150789] usbcore: registered new interface driver hub
> > > [    0.150845] usbcore: registered new device driver usb
> > > [    0.151014] mc: Linux media interface: v0.10
> > > [    0.151049] videodev: Linux video capture interface: v2.00
> > > [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> > > [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > > [    0.151180] PTP clock support registered
> > > [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> > > [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> > > [    0.159588] NET: Registered protocol family 2
> > > [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> > > [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> > > [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> > > [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> > > [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160689] NET: Registered protocol family 1
> > > [    0.161248] RPC: Registered named UNIX socket transport module.
> > > [    0.161263] RPC: Registered udp transport module.
> > > [    0.161272] RPC: Registered tcp transport module.
> > > [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > > [    0.161510] Unpacking initramfs...
> > > [    1.988543] Freeing initrd memory: 30460K
> > > [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> > > [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> > > [    1.996523] NFS: Registering the id_resolver key type
> > > [    1.996573] Key type id_resolver registered
> > > [    1.996582] Key type id_legacy registered
> > > [    1.996659] NET: Registered protocol family 38
> > > [    1.996725] bounce: pool size: 64 pages
> > > [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> > > [    1.996782] io scheduler mq-deadline registered
> > > [    1.996790] io scheduler kyber registered
> > > [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> > > [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> > > [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> > > [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> > > [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> > > [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> > > [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> > > [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> > > [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> > > [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> > > [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> > > [    2.071234] loop: module loaded
> > > [    2.072785] libphy: Fixed MDIO Bus: probed
> > > [    2.073308] CAN device driver interface
> > > [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > [    2.074063] ehci-platform: EHCI generic platform driver
> > > [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > > [    2.074579] ohci-platform: OHCI generic platform driver
> > > [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> > > [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> > > [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> > > [    2.076673] i2c /dev entries driver
> > > [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> > > [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> > > [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> > > [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> > > [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> > > [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> > > [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> > > [    2.407064] random: fast init done
> > > [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> > > [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> > > [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> > > [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> > > [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> > > [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> > > [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> > > [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> > > [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> > > [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> > > [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> > > [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> > > [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> > > [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> > > [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> > > [    4.484782] alg_test_stdrng test sun8i-ce-prng
> > > [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> > > [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> > > [    4.486084] usbcore: registered new interface driver usbhid
> > > [    4.486098] usbhid: USB HID core driver
> > > [    4.488554] NET: Registered protocol family 17
> > > [    4.488580] can: controller area network core
> > > [    4.488668] NET: Registered protocol family 29
> > > [    4.488681] can: raw protocol
> > > [    4.488691] can: broadcast manager protocol
> > > [    4.488705] can: netlink gateway - max_hops=1
> > > [    4.488918] Key type dns_resolver registered
> > > [    4.489063] Registering SWP/SWPB emulation handler
> > > [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> > > [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> > > [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> > > [    4.508216] printk: console [ttyS0] disabled
> > > [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> > > [    5.585887] printk: console [ttyS0] enabled
> > > [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> > > [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> > > [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> > > [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> > > [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> > > [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> > > [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> > > [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> > > [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> > > [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> > > [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> > > [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> > > [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> > > [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> > > [    5.780739] vcc-3v3: supplied by regulator-dummy
> > > [    5.786045] vdd-cpu: supplied by regulator-dummy
> > > [    5.791332] vdd-sys: supplied by regulator-dummy
> > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > 
> > I have just saw thoses 3 lines which are probably the real problem.
> > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > 
> 
> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> Reverting this fix my problem.

It looks like the axp20x driver sets some internal supply names
without of exposing them in DT. This means that regulator core is
not able to find the supply before it is registered... but the driver
seems to register regulators in correct order, so I'm not sure yet
what the bug is.

Best Regards,
Michał Mirosław

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-10-24 11:40       ` Michał Miosław
  0 siblings, 0 replies; 32+ messages in thread
From: Michał Miosław @ 2020-10-24 11:40 UTC (permalink / raw)
  To: Corentin Labbe
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, linux-arm-kernel

On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > Hello
> > > 
> > > On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> > > [    0.000000] Booting Linux on physical CPU 0x0
> > > [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> > > [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> > > [    0.000000] CPU: div instructions available: patching division code
> > > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> > > [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> > > [    0.000000] Memory policy: Data cache writealloc
> > > [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> > > [    0.000000] Zone ranges:
> > > [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> > > [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> > > [    0.000000] Movable zone start for each node
> > > [    0.000000] Early memory node ranges
> > > [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] psci: probing for conduit method from DT.
> > > [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> > > [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> > > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> > > [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> > > [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > > [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > > [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> > > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > > [    0.000000] rcu: Hierarchical RCU implementation.
> > > [    0.000000] rcu: 	RCU event tracing is enabled.
> > > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> > > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > > [    0.000000] GIC: Using split EOI/Deactivate mode
> > > [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> > > [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> > > [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> > > [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > > [    0.000020] Switching to timer-based delay loop, resolution 41ns
> > > [    0.000176] Console: colour dummy device 80x30
> > > [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > > [    0.000251] pid_max: default: 32768 minimum: 301
> > > [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.001117] CPU: Testing write buffer coherency: ok
> > > [    0.001420] /cpus/cpu@0 missing clock-frequency property
> > > [    0.001442] /cpus/cpu@1 missing clock-frequency property
> > > [    0.001459] /cpus/cpu@2 missing clock-frequency property
> > > [    0.001477] /cpus/cpu@3 missing clock-frequency property
> > > [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > > [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> > > [    0.002119] rcu: Hierarchical SRCU implementation.
> > > [    0.002580] smp: Bringing up secondary CPUs ...
> > > [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > > [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> > > [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> > > [    0.034880] smp: Brought up 1 node, 4 CPUs
> > > [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> > > [    0.034912] CPU: All CPU(s) started in HYP mode.
> > > [    0.034919] CPU: Virtualization extensions available.
> > > [    0.035754] devtmpfs: initialized
> > > [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> > > [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> > > [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> > > [    0.042026] pinctrl core: initialized pinctrl subsystem
> > > [    0.043049] NET: Registered protocol family 16
> > > [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> > > [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> > > [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> > > [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> > > [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> > > [    0.123361] alg_test_stdrng test ansi_cprng
> > > [    0.150327] SCSI subsystem initialized
> > > [    0.150742] usbcore: registered new interface driver usbfs
> > > [    0.150789] usbcore: registered new interface driver hub
> > > [    0.150845] usbcore: registered new device driver usb
> > > [    0.151014] mc: Linux media interface: v0.10
> > > [    0.151049] videodev: Linux video capture interface: v2.00
> > > [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> > > [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > > [    0.151180] PTP clock support registered
> > > [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> > > [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> > > [    0.159588] NET: Registered protocol family 2
> > > [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> > > [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> > > [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> > > [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> > > [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160689] NET: Registered protocol family 1
> > > [    0.161248] RPC: Registered named UNIX socket transport module.
> > > [    0.161263] RPC: Registered udp transport module.
> > > [    0.161272] RPC: Registered tcp transport module.
> > > [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > > [    0.161510] Unpacking initramfs...
> > > [    1.988543] Freeing initrd memory: 30460K
> > > [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> > > [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> > > [    1.996523] NFS: Registering the id_resolver key type
> > > [    1.996573] Key type id_resolver registered
> > > [    1.996582] Key type id_legacy registered
> > > [    1.996659] NET: Registered protocol family 38
> > > [    1.996725] bounce: pool size: 64 pages
> > > [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> > > [    1.996782] io scheduler mq-deadline registered
> > > [    1.996790] io scheduler kyber registered
> > > [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> > > [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> > > [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> > > [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> > > [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> > > [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> > > [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> > > [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> > > [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> > > [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> > > [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> > > [    2.071234] loop: module loaded
> > > [    2.072785] libphy: Fixed MDIO Bus: probed
> > > [    2.073308] CAN device driver interface
> > > [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > [    2.074063] ehci-platform: EHCI generic platform driver
> > > [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > > [    2.074579] ohci-platform: OHCI generic platform driver
> > > [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> > > [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> > > [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> > > [    2.076673] i2c /dev entries driver
> > > [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> > > [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> > > [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> > > [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> > > [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> > > [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> > > [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> > > [    2.407064] random: fast init done
> > > [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> > > [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> > > [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> > > [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> > > [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> > > [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> > > [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> > > [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> > > [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> > > [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> > > [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> > > [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> > > [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> > > [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> > > [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> > > [    4.484782] alg_test_stdrng test sun8i-ce-prng
> > > [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> > > [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> > > [    4.486084] usbcore: registered new interface driver usbhid
> > > [    4.486098] usbhid: USB HID core driver
> > > [    4.488554] NET: Registered protocol family 17
> > > [    4.488580] can: controller area network core
> > > [    4.488668] NET: Registered protocol family 29
> > > [    4.488681] can: raw protocol
> > > [    4.488691] can: broadcast manager protocol
> > > [    4.488705] can: netlink gateway - max_hops=1
> > > [    4.488918] Key type dns_resolver registered
> > > [    4.489063] Registering SWP/SWPB emulation handler
> > > [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> > > [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> > > [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> > > [    4.508216] printk: console [ttyS0] disabled
> > > [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> > > [    5.585887] printk: console [ttyS0] enabled
> > > [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> > > [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> > > [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> > > [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> > > [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> > > [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> > > [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> > > [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> > > [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> > > [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> > > [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> > > [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> > > [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> > > [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> > > [    5.780739] vcc-3v3: supplied by regulator-dummy
> > > [    5.786045] vdd-cpu: supplied by regulator-dummy
> > > [    5.791332] vdd-sys: supplied by regulator-dummy
> > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > 
> > I have just saw thoses 3 lines which are probably the real problem.
> > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > 
> 
> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> Reverting this fix my problem.

It looks like the axp20x driver sets some internal supply names
without of exposing them in DT. This means that regulator core is
not able to find the supply before it is registered... but the driver
seems to register regulators in correct order, so I'm not sure yet
what the bug is.

Best Regards,
Michał Mirosław

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-10-23 20:39     ` Corentin Labbe
@ 2020-10-24 11:53       ` Michał Mirosław
  -1 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-10-24 11:53 UTC (permalink / raw)
  To: Corentin Labbe
  Cc: mripard, wens, broonie, lgirdwood, linux-kernel, linux-arm-kernel

On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > Hello
> > > 
> > > On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> > > [    0.000000] Booting Linux on physical CPU 0x0
> > > [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> > > [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> > > [    0.000000] CPU: div instructions available: patching division code
> > > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> > > [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> > > [    0.000000] Memory policy: Data cache writealloc
> > > [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> > > [    0.000000] Zone ranges:
> > > [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> > > [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> > > [    0.000000] Movable zone start for each node
> > > [    0.000000] Early memory node ranges
> > > [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] psci: probing for conduit method from DT.
> > > [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> > > [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> > > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> > > [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> > > [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > > [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > > [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> > > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > > [    0.000000] rcu: Hierarchical RCU implementation.
> > > [    0.000000] rcu: 	RCU event tracing is enabled.
> > > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> > > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > > [    0.000000] GIC: Using split EOI/Deactivate mode
> > > [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> > > [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> > > [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> > > [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > > [    0.000020] Switching to timer-based delay loop, resolution 41ns
> > > [    0.000176] Console: colour dummy device 80x30
> > > [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > > [    0.000251] pid_max: default: 32768 minimum: 301
> > > [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.001117] CPU: Testing write buffer coherency: ok
> > > [    0.001420] /cpus/cpu@0 missing clock-frequency property
> > > [    0.001442] /cpus/cpu@1 missing clock-frequency property
> > > [    0.001459] /cpus/cpu@2 missing clock-frequency property
> > > [    0.001477] /cpus/cpu@3 missing clock-frequency property
> > > [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > > [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> > > [    0.002119] rcu: Hierarchical SRCU implementation.
> > > [    0.002580] smp: Bringing up secondary CPUs ...
> > > [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > > [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> > > [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> > > [    0.034880] smp: Brought up 1 node, 4 CPUs
> > > [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> > > [    0.034912] CPU: All CPU(s) started in HYP mode.
> > > [    0.034919] CPU: Virtualization extensions available.
> > > [    0.035754] devtmpfs: initialized
> > > [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> > > [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> > > [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> > > [    0.042026] pinctrl core: initialized pinctrl subsystem
> > > [    0.043049] NET: Registered protocol family 16
> > > [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> > > [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> > > [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> > > [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> > > [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> > > [    0.123361] alg_test_stdrng test ansi_cprng
> > > [    0.150327] SCSI subsystem initialized
> > > [    0.150742] usbcore: registered new interface driver usbfs
> > > [    0.150789] usbcore: registered new interface driver hub
> > > [    0.150845] usbcore: registered new device driver usb
> > > [    0.151014] mc: Linux media interface: v0.10
> > > [    0.151049] videodev: Linux video capture interface: v2.00
> > > [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> > > [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > > [    0.151180] PTP clock support registered
> > > [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> > > [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> > > [    0.159588] NET: Registered protocol family 2
> > > [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> > > [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> > > [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> > > [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> > > [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160689] NET: Registered protocol family 1
> > > [    0.161248] RPC: Registered named UNIX socket transport module.
> > > [    0.161263] RPC: Registered udp transport module.
> > > [    0.161272] RPC: Registered tcp transport module.
> > > [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > > [    0.161510] Unpacking initramfs...
> > > [    1.988543] Freeing initrd memory: 30460K
> > > [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> > > [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> > > [    1.996523] NFS: Registering the id_resolver key type
> > > [    1.996573] Key type id_resolver registered
> > > [    1.996582] Key type id_legacy registered
> > > [    1.996659] NET: Registered protocol family 38
> > > [    1.996725] bounce: pool size: 64 pages
> > > [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> > > [    1.996782] io scheduler mq-deadline registered
> > > [    1.996790] io scheduler kyber registered
> > > [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> > > [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> > > [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> > > [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> > > [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> > > [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> > > [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> > > [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> > > [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> > > [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> > > [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> > > [    2.071234] loop: module loaded
> > > [    2.072785] libphy: Fixed MDIO Bus: probed
> > > [    2.073308] CAN device driver interface
> > > [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > [    2.074063] ehci-platform: EHCI generic platform driver
> > > [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > > [    2.074579] ohci-platform: OHCI generic platform driver
> > > [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> > > [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> > > [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> > > [    2.076673] i2c /dev entries driver
> > > [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> > > [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> > > [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> > > [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> > > [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> > > [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> > > [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> > > [    2.407064] random: fast init done
> > > [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> > > [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> > > [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> > > [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> > > [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> > > [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> > > [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> > > [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> > > [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> > > [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> > > [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> > > [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> > > [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> > > [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> > > [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> > > [    4.484782] alg_test_stdrng test sun8i-ce-prng
> > > [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> > > [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> > > [    4.486084] usbcore: registered new interface driver usbhid
> > > [    4.486098] usbhid: USB HID core driver
> > > [    4.488554] NET: Registered protocol family 17
> > > [    4.488580] can: controller area network core
> > > [    4.488668] NET: Registered protocol family 29
> > > [    4.488681] can: raw protocol
> > > [    4.488691] can: broadcast manager protocol
> > > [    4.488705] can: netlink gateway - max_hops=1
> > > [    4.488918] Key type dns_resolver registered
> > > [    4.489063] Registering SWP/SWPB emulation handler
> > > [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> > > [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> > > [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> > > [    4.508216] printk: console [ttyS0] disabled
> > > [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> > > [    5.585887] printk: console [ttyS0] enabled
> > > [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> > > [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> > > [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> > > [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> > > [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> > > [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> > > [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> > > [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> > > [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> > > [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> > > [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> > > [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> > > [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> > > [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> > > [    5.780739] vcc-3v3: supplied by regulator-dummy
> > > [    5.786045] vdd-cpu: supplied by regulator-dummy
> > > [    5.791332] vdd-sys: supplied by regulator-dummy
> > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > 
> > I have just saw thoses 3 lines which are probably the real problem.
> > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > 
> 
> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> Reverting this fix my problem.

Can you try the hack below?

Best Regards,
Michał Mirosław

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a4ffd71696da..9ad091f5f1ab 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 		}
 
 		if (current_uV < 0) {
+			if (current_uV == -EINVAL && rdev->supply_name)
+				return -EPROBE_DEFER;
+
 			rdev_err(rdev,
 				 "failed to get the current voltage: %pe\n",
 				 ERR_PTR(current_uV));

^ permalink raw reply related	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-10-24 11:53       ` Michał Mirosław
  0 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-10-24 11:53 UTC (permalink / raw)
  To: Corentin Labbe
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, linux-arm-kernel

On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > Hello
> > > 
> > > On next-20201016, booting my sun8i-r40-bananapi-m2-ultra, the boot end without at least stmmac working.
> > > [    0.000000] Booting Linux on physical CPU 0x0
> > > [    0.000000] Linux version 5.9.0-next-20201016-00055-g98489213ff7c-dirty (compile@Red) (armv7a-unknown-linux-gnueabihf-gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.33.1 p2) 2.33.1) #162 SMP Tue Oct 20 08:10:25 CEST 2020
> > > [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
> > > [    0.000000] CPU: div instructions available: patching division code
> > > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> > > [    0.000000] OF: fdt: Machine model: Banana Pi BPI-M2-Ultra
> > > [    0.000000] Memory policy: Data cache writealloc
> > > [    0.000000] cma: Reserved 16 MiB at 0xbec00000
> > > [    0.000000] Zone ranges:
> > > [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
> > > [    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000bfffffff]
> > > [    0.000000] Movable zone start for each node
> > > [    0.000000] Early memory node ranges
> > > [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
> > > [    0.000000] psci: probing for conduit method from DT.
> > > [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
> > > [    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
> > > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522752
> > > [    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 ip=dhcp trace_event=initcall:*,module:* trace_options=stacktrace ip=dhcp
> > > [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> > > [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> > > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > > [    0.000000] Memory: 2020320K/2097152K available (7168K kernel code, 934K rwdata, 2252K rodata, 1024K init, 248K bss, 60448K reserved, 16384K cma-reserved, 1294324K highmem)
> > > [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > > [    0.000000] rcu: Hierarchical RCU implementation.
> > > [    0.000000] rcu: 	RCU event tracing is enabled.
> > > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> > > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > > [    0.000000] GIC: Using split EOI/Deactivate mode
> > > [    0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0
> > > [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> > > [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> > > [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > > [    0.000020] Switching to timer-based delay loop, resolution 41ns
> > > [    0.000176] Console: colour dummy device 80x30
> > > [    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > > [    0.000251] pid_max: default: 32768 minimum: 301
> > > [    0.000395] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.000414] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> > > [    0.001117] CPU: Testing write buffer coherency: ok
> > > [    0.001420] /cpus/cpu@0 missing clock-frequency property
> > > [    0.001442] /cpus/cpu@1 missing clock-frequency property
> > > [    0.001459] /cpus/cpu@2 missing clock-frequency property
> > > [    0.001477] /cpus/cpu@3 missing clock-frequency property
> > > [    0.001490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > > [    0.002001] Setting up static identity map for 0x40100000 - 0x40100060
> > > [    0.002119] rcu: Hierarchical SRCU implementation.
> > > [    0.002580] smp: Bringing up secondary CPUs ...
> > > [    0.013271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > > [    0.024063] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> > > [    0.034784] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> > > [    0.034880] smp: Brought up 1 node, 4 CPUs
> > > [    0.034904] SMP: Total of 4 processors activated (192.00 BogoMIPS).
> > > [    0.034912] CPU: All CPU(s) started in HYP mode.
> > > [    0.034919] CPU: Virtualization extensions available.
> > > [    0.035754] devtmpfs: initialized
> > > [    0.041021] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
> > > [    0.041258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> > > [    0.041283] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> > > [    0.042026] pinctrl core: initialized pinctrl subsystem
> > > [    0.043049] NET: Registered protocol family 16
> > > [    0.044324] DMA: preallocated 256 KiB pool for atomic coherent allocations
> > > [    0.045360] thermal_sys: Registered thermal governor 'step_wise'
> > > [    0.045788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
> > > [    0.045805] hw-breakpoint: maximum watchpoint size is 8 bytes.
> > > [    0.065862] alg: extra crypto tests enabled.  This is intended for developer use only.
> > > [    0.123361] alg_test_stdrng test ansi_cprng
> > > [    0.150327] SCSI subsystem initialized
> > > [    0.150742] usbcore: registered new interface driver usbfs
> > > [    0.150789] usbcore: registered new interface driver hub
> > > [    0.150845] usbcore: registered new device driver usb
> > > [    0.151014] mc: Linux media interface: v0.10
> > > [    0.151049] videodev: Linux video capture interface: v2.00
> > > [    0.151149] pps_core: LinuxPPS API ver. 1 registered
> > > [    0.151159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > > [    0.151180] PTP clock support registered
> > > [    0.151575] Advanced Linux Sound Architecture Driver Initialized.
> > > [    0.152420] clocksource: Switched to clocksource arch_sys_counter
> > > [    0.159588] NET: Registered protocol family 2
> > > [    0.160080] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
> > > [    0.160112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> > > [    0.160188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
> > > [    0.160304] TCP: Hash tables configured (established 8192 bind 8192)
> > > [    0.160423] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> > > [    0.160689] NET: Registered protocol family 1
> > > [    0.161248] RPC: Registered named UNIX socket transport module.
> > > [    0.161263] RPC: Registered udp transport module.
> > > [    0.161272] RPC: Registered tcp transport module.
> > > [    0.161280] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > > [    0.161510] Unpacking initramfs...
> > > [    1.988543] Freeing initrd memory: 30460K
> > > [    1.989598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
> > > [    1.990836] workingset: timestamp_bits=30 max_order=19 bucket_order=0
> > > [    1.996523] NFS: Registering the id_resolver key type
> > > [    1.996573] Key type id_resolver registered
> > > [    1.996582] Key type id_legacy registered
> > > [    1.996659] NET: Registered protocol family 38
> > > [    1.996725] bounce: pool size: 64 pages
> > > [    1.996770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> > > [    1.996782] io scheduler mq-deadline registered
> > > [    1.996790] io scheduler kyber registered
> > > [    1.997771] sun4i-usb-phy 1c13400.phy: failed to get clock usb0_phy
> > > [    1.999624] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    2.052865] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> > > [    2.058849] sun8i-mixer 1100000.mixer: Couldn't get our reset line
> > > [    2.058962] sun4i-drm display-engine: Couldn't bind all pipelines components
> > > [    2.061927] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
> > > [    2.061987] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
> > > [    2.062041] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
> > > [    2.062092] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
> > > [    2.062567] lima 1c40000.gpu: bus rate = 200000000
> > > [    2.062584] lima 1c40000.gpu: mod rate = 297000000
> > > [    2.062990] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
> > > [    2.071234] loop: module loaded
> > > [    2.072785] libphy: Fixed MDIO Bus: probed
> > > [    2.073308] CAN device driver interface
> > > [    2.074052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > [    2.074063] ehci-platform: EHCI generic platform driver
> > > [    2.074552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > > [    2.074579] ohci-platform: OHCI generic platform driver
> > > [    2.076335] sun6i-rtc 1c20400.rtc: registered as rtc0
> > > [    2.076383] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
> > > [    2.076394] sun6i-rtc 1c20400.rtc: RTC enabled
> > > [    2.076673] i2c /dev entries driver
> > > [    2.079404] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
> > > [    2.079812] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> > > [    2.080803] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
> > > [    2.081050] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081384] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081521] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081630] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
> > > [    2.081728] sun8i-ce 1c15000.crypto: Register cbc(aes)
> > > [    2.120538] sun8i-ce 1c15000.crypto: Fallback for cbc-aes-sun8i-ce is cbc(aes-generic)
> > > [    2.357120] sun8i-ce 1c15000.crypto: Register ecb(aes)
> > > [    2.387952] sun8i-ce 1c15000.crypto: Fallback for ecb-aes-sun8i-ce is ecb(aes-generic)
> > > [    2.407064] random: fast init done
> > > [    2.589700] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
> > > [    2.641051] sun8i-ce 1c15000.crypto: Fallback for cbc-des3-sun8i-ce is cbc(des3_ede-generic)
> > > [    3.281510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
> > > [    3.333414] sun8i-ce 1c15000.crypto: Fallback for ecb-des3-sun8i-ce is ecb(des3_ede-generic)
> > > [    3.874269] sun8i-ce 1c15000.crypto: Register md5
> > > [    3.874437] sun8i-ce 1c15000.crypto: Fallback for md5-sun8i-ce is md5-generic
> > > [    3.980669] sun8i-ce 1c15000.crypto: Register sha1
> > > [    3.980869] sun8i-ce 1c15000.crypto: Fallback for sha1-sun8i-ce is sha1-generic
> > > [    4.104525] sun8i-ce 1c15000.crypto: Register sha224
> > > [    4.159000] sun8i-ce 1c15000.crypto: Fallback for sha224-sun8i-ce is sha224-generic
> > > [    4.323465] sun8i-ce 1c15000.crypto: Register sha256
> > > [    4.323665] sun8i-ce 1c15000.crypto: Fallback for sha256-sun8i-ce is sha256-generic
> > > [    4.484572] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
> > > [    4.484598] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
> > > [    4.484609] sun8i-ce 1c15000.crypto: Register stdrng
> > > [    4.484782] alg_test_stdrng test sun8i-ce-prng
> > > [    4.484881] sun8i-ce 1c15000.crypto: TRNG not supported
> > > [    4.484897] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
> > > [    4.486084] usbcore: registered new interface driver usbhid
> > > [    4.486098] usbhid: USB HID core driver
> > > [    4.488554] NET: Registered protocol family 17
> > > [    4.488580] can: controller area network core
> > > [    4.488668] NET: Registered protocol family 29
> > > [    4.488681] can: raw protocol
> > > [    4.488691] can: broadcast manager protocol
> > > [    4.488705] can: netlink gateway - max_hops=1
> > > [    4.488918] Key type dns_resolver registered
> > > [    4.489063] Registering SWP/SWPB emulation handler
> > > [    4.501808] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
> > > [    4.503853] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
> > > [    4.505470] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
> > > [    4.507391] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
> > > [    4.508216] printk: console [ttyS0] disabled
> > > [    4.528470] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
> > > [    5.585887] printk: console [ttyS0] enabled
> > > [    5.590785] dw-apb-uart 1c28c00.serial: Error applying setting, reverse things back
> > > [    5.609876] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc087f4d0)
> > > [    5.618713] sun4i-drm display-engine: bound 1200000.mixer (ops 0xc087f4d0)
> > > [    5.626022] sun4i-drm display-engine: bound 1c70000.tcon-top (ops 0xc08837e0)
> > > [    5.633467] sun4i-drm display-engine: bound 1c73000.lcd-controller (ops 0xc087b760)
> > > [    5.641177] sun8i-dw-hdmi 1ee0000.hdmi: supply hvcc not found, using dummy regulator
> > > [    5.682538] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
> > > [    5.692591] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
> > > [    5.700429] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc087ea28)
> > > [    5.707707] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
> > > [    5.715530] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.723563] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
> > > [    5.734175] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
> > > [    5.741110] i2c i2c-1: Not using recovery: no recover_bus() found
> > > [    5.748415] axp20x-i2c 1-0034: AXP20x variant AXP221 found
> > > [    5.761265] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp221-pek/input/input0
> > > [    5.780739] vcc-3v3: supplied by regulator-dummy
> > > [    5.786045] vdd-cpu: supplied by regulator-dummy
> > > [    5.791332] vdd-sys: supplied by regulator-dummy
> > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > 
> > I have just saw thoses 3 lines which are probably the real problem.
> > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > 
> 
> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> Reverting this fix my problem.

Can you try the hack below?

Best Regards,
Michał Mirosław

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a4ffd71696da..9ad091f5f1ab 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 		}
 
 		if (current_uV < 0) {
+			if (current_uV == -EINVAL && rdev->supply_name)
+				return -EPROBE_DEFER;
+
 			rdev_err(rdev,
 				 "failed to get the current voltage: %pe\n",
 				 ERR_PTR(current_uV));

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-10-24 11:53       ` Michał Mirosław
@ 2020-11-01  1:31         ` Ondřej Jirman
  -1 siblings, 0 replies; 32+ messages in thread
From: Ondřej Jirman @ 2020-11-01  1:31 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: Corentin Labbe, mripard, wens, broonie, lgirdwood, linux-kernel,
	linux-arm-kernel

Hello Michał,

On Sat, Oct 24, 2020 at 01:53:07PM +0200, Michał Mirosław wrote:
> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> > On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > > 
> > > I have just saw thoses 3 lines which are probably the real problem.
> > > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > > 
> > 
> > I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> > Reverting this fix my problem.
> 
> Can you try the hack below?
> 
> Best Regards,
> Michał Mirosław
> 
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index a4ffd71696da..9ad091f5f1ab 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
>  		}
>  
>  		if (current_uV < 0) {
> +			if (current_uV == -EINVAL && rdev->supply_name)
> +				return -EPROBE_DEFER;
> +
>  			rdev_err(rdev,
>  				 "failed to get the current voltage: %pe\n",
>  				 ERR_PTR(current_uV));

I did hit the same problem on sun8i-a83t-tbs-a711.dts tablet.

The patch helps on top of v5.9.2, and on linus/master.

regards,
	o.

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-01  1:31         ` Ondřej Jirman
  0 siblings, 0 replies; 32+ messages in thread
From: Ondřej Jirman @ 2020-11-01  1:31 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	linux-arm-kernel

Hello Michał,

On Sat, Oct 24, 2020 at 01:53:07PM +0200, Michał Mirosław wrote:
> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> > On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > > 
> > > I have just saw thoses 3 lines which are probably the real problem.
> > > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > > 
> > 
> > I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> > Reverting this fix my problem.
> 
> Can you try the hack below?
> 
> Best Regards,
> Michał Mirosław
> 
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index a4ffd71696da..9ad091f5f1ab 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
>  		}
>  
>  		if (current_uV < 0) {
> +			if (current_uV == -EINVAL && rdev->supply_name)
> +				return -EPROBE_DEFER;
> +
>  			rdev_err(rdev,
>  				 "failed to get the current voltage: %pe\n",
>  				 ERR_PTR(current_uV));

I did hit the same problem on sun8i-a83t-tbs-a711.dts tablet.

The patch helps on top of v5.9.2, and on linus/master.

regards,
	o.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-01  1:31         ` Ondřej Jirman
@ 2020-11-02  7:40           ` Corentin Labbe
  -1 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-11-02  7:40 UTC (permalink / raw)
  To: Ondřej Jirman, Michał Mirosław, mripard, wens,
	broonie, lgirdwood, linux-kernel, linux-arm-kernel

On Sun, Nov 01, 2020 at 02:31:15AM +0100, Ondřej Jirman wrote:
> Hello Michał,
> 
> On Sat, Oct 24, 2020 at 01:53:07PM +0200, Michał Mirosław wrote:
> > On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> > > On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > > > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > > > 
> > > > I have just saw thoses 3 lines which are probably the real problem.
> > > > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > > > 
> > > 
> > > I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> > > Reverting this fix my problem.
> > 
> > Can you try the hack below?
> > 
> > Best Regards,
> > Michał Mirosław
> > 
> > diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> > index a4ffd71696da..9ad091f5f1ab 100644
> > --- a/drivers/regulator/core.c
> > +++ b/drivers/regulator/core.c
> > @@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
> >  		}
> >  
> >  		if (current_uV < 0) {
> > +			if (current_uV == -EINVAL && rdev->supply_name)
> > +				return -EPROBE_DEFER;
> > +
> >  			rdev_err(rdev,
> >  				 "failed to get the current voltage: %pe\n",
> >  				 ERR_PTR(current_uV));
> 
> I did hit the same problem on sun8i-a83t-tbs-a711.dts tablet.
> 
> The patch helps on top of v5.9.2, and on linus/master.
> 

Hello

Sorry I didnt get your original email.

Tested on top of next-20201030.
I have added a debug """rdev_info(rdev, "%s DEFER\n", __func__);""" and I confirm this hack is used since I got "vcc-gmac-phy: machine_constraints_voltage DEFER"

So if you send the patch you can add:
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-on: sun8i-r40-bananapi-m2-ultra

Regards

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-02  7:40           ` Corentin Labbe
  0 siblings, 0 replies; 32+ messages in thread
From: Corentin Labbe @ 2020-11-02  7:40 UTC (permalink / raw)
  To: Ondřej Jirman, Michał Mirosław, mripard, wens,
	broonie, lgirdwood, linux-kernel, linux-arm-kernel

On Sun, Nov 01, 2020 at 02:31:15AM +0100, Ondřej Jirman wrote:
> Hello Michał,
> 
> On Sat, Oct 24, 2020 at 01:53:07PM +0200, Michał Mirosław wrote:
> > On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> > > On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> > > > On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> > > > > [    5.796585] dcdc4: supplied by regulator-dummy
> > > > > [    5.801647] vcc-dram: supplied by regulator-dummy
> > > > > [    5.806470] vcc-gmac-phy: failed to get the current voltage: -EINVAL
> > > > > [    5.812839] axp20x-regulator axp20x-regulator: Failed to register dc1sw
> > > > > [    5.820291] axp20x-regulator: probe of axp20x-regulator failed with error -22
> > > > 
> > > > I have just saw thoses 3 lines which are probably the real problem.
> > > > I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> > > > 
> > > 
> > > I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> > > Reverting this fix my problem.
> > 
> > Can you try the hack below?
> > 
> > Best Regards,
> > Michał Mirosław
> > 
> > diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> > index a4ffd71696da..9ad091f5f1ab 100644
> > --- a/drivers/regulator/core.c
> > +++ b/drivers/regulator/core.c
> > @@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
> >  		}
> >  
> >  		if (current_uV < 0) {
> > +			if (current_uV == -EINVAL && rdev->supply_name)
> > +				return -EPROBE_DEFER;
> > +
> >  			rdev_err(rdev,
> >  				 "failed to get the current voltage: %pe\n",
> >  				 ERR_PTR(current_uV));
> 
> I did hit the same problem on sun8i-a83t-tbs-a711.dts tablet.
> 
> The patch helps on top of v5.9.2, and on linus/master.
> 

Hello

Sorry I didnt get your original email.

Tested on top of next-20201030.
I have added a debug """rdev_info(rdev, "%s DEFER\n", __func__);""" and I confirm this hack is used since I got "vcc-gmac-phy: machine_constraints_voltage DEFER"

So if you send the patch you can add:
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-on: sun8i-r40-bananapi-m2-ultra

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-10-24 11:53       ` Michał Mirosław
@ 2020-11-02 12:48         ` Ahmad Fatoum
  -1 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-02 12:48 UTC (permalink / raw)
  To: Michał Mirosław, Corentin Labbe
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32

Hello Michał,

CC += linux-stm32

On 10/24/20 1:53 PM, Michał Mirosław wrote:
> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
>>> I have just saw thoses 3 lines which are probably the real problem.
>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
>>>
>>
>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
>> Reverting this fix my problem.

The change broke boot on all the STM32MP1 boards, because the STPMIC driver
has a vref_ddr regulator, which does not have a dedicated supply, but without
a vref_ddr-supply property the system now no longer boots.

> Can you try the hack below?
> 
> Best Regards,
> Michał Mirosław
> 
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index a4ffd71696da..9ad091f5f1ab 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
>  		}
>  
>  		if (current_uV < 0) {
> +			if (current_uV == -EINVAL && rdev->supply_name)
> +				return -EPROBE_DEFER;
> +

This doesn't fix the issue for the STM32MP1 boards (tested on LXA MC-1).
Seeing that the patch is already in stable, I think this patch should be
reverted until the issues are solved in Linus' master.

Cheers,
Ahmad


>  			rdev_err(rdev,
>  				 "failed to get the current voltage: %pe\n",
>  				 ERR_PTR(current_uV));
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-02 12:48         ` Ahmad Fatoum
  0 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-02 12:48 UTC (permalink / raw)
  To: Michał Mirosław, Corentin Labbe
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, linux-stm32,
	linux-arm-kernel

Hello Michał,

CC += linux-stm32

On 10/24/20 1:53 PM, Michał Mirosław wrote:
> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
>>> I have just saw thoses 3 lines which are probably the real problem.
>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
>>>
>>
>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
>> Reverting this fix my problem.

The change broke boot on all the STM32MP1 boards, because the STPMIC driver
has a vref_ddr regulator, which does not have a dedicated supply, but without
a vref_ddr-supply property the system now no longer boots.

> Can you try the hack below?
> 
> Best Regards,
> Michał Mirosław
> 
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index a4ffd71696da..9ad091f5f1ab 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -1169,6 +1169,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
>  		}
>  
>  		if (current_uV < 0) {
> +			if (current_uV == -EINVAL && rdev->supply_name)
> +				return -EPROBE_DEFER;
> +

This doesn't fix the issue for the STM32MP1 boards (tested on LXA MC-1).
Seeing that the patch is already in stable, I think this patch should be
reverted until the issues are solved in Linus' master.

Cheers,
Ahmad


>  			rdev_err(rdev,
>  				 "failed to get the current voltage: %pe\n",
>  				 ERR_PTR(current_uV));
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-02 12:48         ` Ahmad Fatoum
@ 2020-11-02 20:27           ` Michał Mirosław
  -1 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-11-02 20:27 UTC (permalink / raw)
  To: Ahmad Fatoum
  Cc: Corentin Labbe, lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32

On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
> Hello Michał,
> 
> CC += linux-stm32
> 
> On 10/24/20 1:53 PM, Michał Mirosław wrote:
> > On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> >> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> >>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> >>> I have just saw thoses 3 lines which are probably the real problem.
> >>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> >>>
> >>
> >> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> >> Reverting this fix my problem.
> 
> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
> has a vref_ddr regulator, which does not have a dedicated supply, but without
> a vref_ddr-supply property the system now no longer boots.
[...]

Can you catch debug logs for the bootup in question? I'm not sure what's
the failure mode in your case. I guess this is not a bypassed regulator?

Best Regards,
Michał Mirosław


^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-02 20:27           ` Michał Mirosław
  0 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-11-02 20:27 UTC (permalink / raw)
  To: Ahmad Fatoum
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	linux-stm32, linux-arm-kernel

On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
> Hello Michał,
> 
> CC += linux-stm32
> 
> On 10/24/20 1:53 PM, Michał Mirosław wrote:
> > On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> >> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> >>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> >>> I have just saw thoses 3 lines which are probably the real problem.
> >>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> >>>
> >>
> >> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> >> Reverting this fix my problem.
> 
> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
> has a vref_ddr regulator, which does not have a dedicated supply, but without
> a vref_ddr-supply property the system now no longer boots.
[...]

Can you catch debug logs for the bootup in question? I'm not sure what's
the failure mode in your case. I guess this is not a bypassed regulator?

Best Regards,
Michał Mirosław


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-02 20:27           ` Michał Mirosław
@ 2020-11-04 10:28             ` Ahmad Fatoum
  -1 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-04 10:28 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: Corentin Labbe, lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32, Pengutronix Kernel Team

Hello,

On 11/2/20 9:27 PM, Michał Mirosław wrote:
> On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
>> Hello Michał,
>>
>> CC += linux-stm32
>>
>> On 10/24/20 1:53 PM, Michał Mirosław wrote:
>>> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
>>>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
>>>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
>>>>> I have just saw thoses 3 lines which are probably the real problem.
>>>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
>>>>>
>>>>
>>>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
>>>> Reverting this fix my problem.
>>
>> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
>> has a vref_ddr regulator, which does not have a dedicated supply, but without
>> a vref_ddr-supply property the system now no longer boots.
> [...]
> 
> Can you catch debug logs for the bootup in question? I'm not sure what's
> the failure mode in your case. I guess this is not a bypassed regulator?

Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
to get voltage from unresolved supply") hangs:

[    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.189526] vddcore: supplied by regulator-dummy
[    1.195633] vdd_ddr: supplied by regulator-dummy
[    1.201672] vdd: supplied by regulator-dummy
[    1.207452] v3v3: supplied by 5V2
[    1.211997] v1v8_audio: supplied by v3v3
[    1.218036] v3v3_hdmi: supplied by 5V2
[    1.223626] vtt_ddr: supplied by regulator-dummy
[    1.227107] vdd_usb: supplied by regulator-dummy
[    1.234532] vdda: supplied by 5V2
[    1.239497] v1v2_hdmi: supplied by v3v3

Boot up with v5.10-rc2 with aea6cb99 ("regulator: resolve supply after
creating regulator") reverted boots correctly:

[    1.151458] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.180668] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.186629] BUCK1: supplied by regulator-dummy
[    1.192628] BUCK2: supplied by regulator-dummy
[    1.198667] BUCK3: supplied by regulator-dummy
[    1.204623] BUCK4: supplied by 5V2
[    1.209424] LDO1: supplied by v3v3
[    1.214931] LDO2: supplied by 5V2
[    1.219897] LDO3: supplied by regulator-dummy
[    1.225784] LDO4: supplied by regulator-dummy
[    1.229239] LDO5: supplied by 5V2
[    1.235097] LDO6: supplied by v3v3
[    1.240164] VREF_DDR: supplied by regulator-dummy
[    1.246130] BOOST: supplied by 5V2
[    1.248617] VBUS_OTG: supplied by bst_out
[    1.252698] SW_OUT: supplied by bst_out

Boot up with v5.10-rc2 + your cf1ad559a2 + &pmic { regulators { vref_ddr-supply = <&reg_5v2>; }
boots correctly as well:

[    1.151531] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.180759] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.189543] vddcore: supplied by regulator-dummy
[    1.195651] vdd_ddr: supplied by regulator-dummy
[    1.201687] vdd: supplied by regulator-dummy
[    1.207470] v3v3: supplied by 5V2
[    1.212015] v1v8_audio: supplied by v3v3
[    1.218053] v3v3_hdmi: supplied by 5V2
[    1.223647] vtt_ddr: supplied by regulator-dummy
[    1.227128] vdd_usb: supplied by regulator-dummy
[    1.234553] vdda: supplied by 5V2
[    1.239510] v1v2_hdmi: supplied by v3v3
[    1.244932] vref_ddr: supplied by 5V2
[    1.247397] bst_out: supplied by 5V2
[    1.251338] vbus_otg: supplied by bst_out
[    1.255416] vbus_sw: supplied by bst_out


Cheers
Ahmad

> 
> Best Regards,
> Michał Mirosław
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-04 10:28             ` Ahmad Fatoum
  0 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-04 10:28 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hello,

On 11/2/20 9:27 PM, Michał Mirosław wrote:
> On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
>> Hello Michał,
>>
>> CC += linux-stm32
>>
>> On 10/24/20 1:53 PM, Michał Mirosław wrote:
>>> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
>>>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
>>>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
>>>>> I have just saw thoses 3 lines which are probably the real problem.
>>>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
>>>>>
>>>>
>>>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
>>>> Reverting this fix my problem.
>>
>> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
>> has a vref_ddr regulator, which does not have a dedicated supply, but without
>> a vref_ddr-supply property the system now no longer boots.
> [...]
> 
> Can you catch debug logs for the bootup in question? I'm not sure what's
> the failure mode in your case. I guess this is not a bypassed regulator?

Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
to get voltage from unresolved supply") hangs:

[    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.189526] vddcore: supplied by regulator-dummy
[    1.195633] vdd_ddr: supplied by regulator-dummy
[    1.201672] vdd: supplied by regulator-dummy
[    1.207452] v3v3: supplied by 5V2
[    1.211997] v1v8_audio: supplied by v3v3
[    1.218036] v3v3_hdmi: supplied by 5V2
[    1.223626] vtt_ddr: supplied by regulator-dummy
[    1.227107] vdd_usb: supplied by regulator-dummy
[    1.234532] vdda: supplied by 5V2
[    1.239497] v1v2_hdmi: supplied by v3v3

Boot up with v5.10-rc2 with aea6cb99 ("regulator: resolve supply after
creating regulator") reverted boots correctly:

[    1.151458] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.180668] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.186629] BUCK1: supplied by regulator-dummy
[    1.192628] BUCK2: supplied by regulator-dummy
[    1.198667] BUCK3: supplied by regulator-dummy
[    1.204623] BUCK4: supplied by 5V2
[    1.209424] LDO1: supplied by v3v3
[    1.214931] LDO2: supplied by 5V2
[    1.219897] LDO3: supplied by regulator-dummy
[    1.225784] LDO4: supplied by regulator-dummy
[    1.229239] LDO5: supplied by 5V2
[    1.235097] LDO6: supplied by v3v3
[    1.240164] VREF_DDR: supplied by regulator-dummy
[    1.246130] BOOST: supplied by 5V2
[    1.248617] VBUS_OTG: supplied by bst_out
[    1.252698] SW_OUT: supplied by bst_out

Boot up with v5.10-rc2 + your cf1ad559a2 + &pmic { regulators { vref_ddr-supply = <&reg_5v2>; }
boots correctly as well:

[    1.151531] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.180759] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.189543] vddcore: supplied by regulator-dummy
[    1.195651] vdd_ddr: supplied by regulator-dummy
[    1.201687] vdd: supplied by regulator-dummy
[    1.207470] v3v3: supplied by 5V2
[    1.212015] v1v8_audio: supplied by v3v3
[    1.218053] v3v3_hdmi: supplied by 5V2
[    1.223647] vtt_ddr: supplied by regulator-dummy
[    1.227128] vdd_usb: supplied by regulator-dummy
[    1.234553] vdda: supplied by 5V2
[    1.239510] v1v2_hdmi: supplied by v3v3
[    1.244932] vref_ddr: supplied by 5V2
[    1.247397] bst_out: supplied by 5V2
[    1.251338] vbus_otg: supplied by bst_out
[    1.255416] vbus_sw: supplied by bst_out


Cheers
Ahmad

> 
> Best Regards,
> Michał Mirosław
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [Linux-stm32] [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-04 10:28             ` Ahmad Fatoum
@ 2020-11-04 10:50               ` Alexandre Torgue
  -1 siblings, 0 replies; 32+ messages in thread
From: Alexandre Torgue @ 2020-11-04 10:50 UTC (permalink / raw)
  To: Ahmad Fatoum, Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hi Ahmad

On 11/4/20 11:28 AM, Ahmad Fatoum wrote:
> Hello,
> 
> On 11/2/20 9:27 PM, Michał Mirosław wrote:
>> On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
>>> Hello Michał,
>>>
>>> CC += linux-stm32
>>>
>>> On 10/24/20 1:53 PM, Michał Mirosław wrote:
>>>> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
>>>>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
>>>>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
>>>>>> I have just saw thoses 3 lines which are probably the real problem.
>>>>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
>>>>>>
>>>>>
>>>>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
>>>>> Reverting this fix my problem.
>>>
>>> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
>>> has a vref_ddr regulator, which does not have a dedicated supply, but without
>>> a vref_ddr-supply property the system now no longer boots.
>> [...]
>>
>> Can you catch debug logs for the bootup in question? I'm not sure what's
>> the failure mode in your case. I guess this is not a bypassed regulator?
> 
> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
> to get voltage from unresolved supply") hangs:
> 
> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.189526] vddcore: supplied by regulator-dummy
> [    1.195633] vdd_ddr: supplied by regulator-dummy
> [    1.201672] vdd: supplied by regulator-dummy
> [    1.207452] v3v3: supplied by 5V2
> [    1.211997] v1v8_audio: supplied by v3v3
> [    1.218036] v3v3_hdmi: supplied by 5V2
> [    1.223626] vtt_ddr: supplied by regulator-dummy
> [    1.227107] vdd_usb: supplied by regulator-dummy
> [    1.234532] vdda: supplied by 5V2
> [    1.239497] v1v2_hdmi: supplied by v3v3
> 
> Boot up with v5.10-rc2 with aea6cb99 ("regulator: resolve supply after
> creating regulator") reverted boots correctly:
> 
> [    1.151458] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180668] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.186629] BUCK1: supplied by regulator-dummy
> [    1.192628] BUCK2: supplied by regulator-dummy
> [    1.198667] BUCK3: supplied by regulator-dummy
> [    1.204623] BUCK4: supplied by 5V2
> [    1.209424] LDO1: supplied by v3v3
> [    1.214931] LDO2: supplied by 5V2
> [    1.219897] LDO3: supplied by regulator-dummy
> [    1.225784] LDO4: supplied by regulator-dummy
> [    1.229239] LDO5: supplied by 5V2
> [    1.235097] LDO6: supplied by v3v3
> [    1.240164] VREF_DDR: supplied by regulator-dummy
> [    1.246130] BOOST: supplied by 5V2
> [    1.248617] VBUS_OTG: supplied by bst_out
> [    1.252698] SW_OUT: supplied by bst_out
> 
> Boot up with v5.10-rc2 + your cf1ad559a2 + &pmic { regulators { vref_ddr-supply = <&reg_5v2>; }

Just to know, Did you test v5.10-rc2 + vref_ddr-supply = <&reg_5v2>; ? 
(which seems to correspond to the patch I sent for DK/EV STM32 boards)

> boots correctly as well:
> 
> [    1.151531] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180759] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.189543] vddcore: supplied by regulator-dummy
> [    1.195651] vdd_ddr: supplied by regulator-dummy
> [    1.201687] vdd: supplied by regulator-dummy
> [    1.207470] v3v3: supplied by 5V2
> [    1.212015] v1v8_audio: supplied by v3v3
> [    1.218053] v3v3_hdmi: supplied by 5V2
> [    1.223647] vtt_ddr: supplied by regulator-dummy
> [    1.227128] vdd_usb: supplied by regulator-dummy
> [    1.234553] vdda: supplied by 5V2
> [    1.239510] v1v2_hdmi: supplied by v3v3
> [    1.244932] vref_ddr: supplied by 5V2
> [    1.247397] bst_out: supplied by 5V2
> [    1.251338] vbus_otg: supplied by bst_out
> [    1.255416] vbus_sw: supplied by bst_out
> 
> 
> Cheers
> Ahmad
> 
>>
>> Best Regards,
>> Michał Mirosław
>>
>>
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [Linux-stm32] [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-04 10:50               ` Alexandre Torgue
  0 siblings, 0 replies; 32+ messages in thread
From: Alexandre Torgue @ 2020-11-04 10:50 UTC (permalink / raw)
  To: Ahmad Fatoum, Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hi Ahmad

On 11/4/20 11:28 AM, Ahmad Fatoum wrote:
> Hello,
> 
> On 11/2/20 9:27 PM, Michał Mirosław wrote:
>> On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
>>> Hello Michał,
>>>
>>> CC += linux-stm32
>>>
>>> On 10/24/20 1:53 PM, Michał Mirosław wrote:
>>>> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
>>>>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
>>>>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
>>>>>> I have just saw thoses 3 lines which are probably the real problem.
>>>>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
>>>>>>
>>>>>
>>>>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
>>>>> Reverting this fix my problem.
>>>
>>> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
>>> has a vref_ddr regulator, which does not have a dedicated supply, but without
>>> a vref_ddr-supply property the system now no longer boots.
>> [...]
>>
>> Can you catch debug logs for the bootup in question? I'm not sure what's
>> the failure mode in your case. I guess this is not a bypassed regulator?
> 
> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
> to get voltage from unresolved supply") hangs:
> 
> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.189526] vddcore: supplied by regulator-dummy
> [    1.195633] vdd_ddr: supplied by regulator-dummy
> [    1.201672] vdd: supplied by regulator-dummy
> [    1.207452] v3v3: supplied by 5V2
> [    1.211997] v1v8_audio: supplied by v3v3
> [    1.218036] v3v3_hdmi: supplied by 5V2
> [    1.223626] vtt_ddr: supplied by regulator-dummy
> [    1.227107] vdd_usb: supplied by regulator-dummy
> [    1.234532] vdda: supplied by 5V2
> [    1.239497] v1v2_hdmi: supplied by v3v3
> 
> Boot up with v5.10-rc2 with aea6cb99 ("regulator: resolve supply after
> creating regulator") reverted boots correctly:
> 
> [    1.151458] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180668] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.186629] BUCK1: supplied by regulator-dummy
> [    1.192628] BUCK2: supplied by regulator-dummy
> [    1.198667] BUCK3: supplied by regulator-dummy
> [    1.204623] BUCK4: supplied by 5V2
> [    1.209424] LDO1: supplied by v3v3
> [    1.214931] LDO2: supplied by 5V2
> [    1.219897] LDO3: supplied by regulator-dummy
> [    1.225784] LDO4: supplied by regulator-dummy
> [    1.229239] LDO5: supplied by 5V2
> [    1.235097] LDO6: supplied by v3v3
> [    1.240164] VREF_DDR: supplied by regulator-dummy
> [    1.246130] BOOST: supplied by 5V2
> [    1.248617] VBUS_OTG: supplied by bst_out
> [    1.252698] SW_OUT: supplied by bst_out
> 
> Boot up with v5.10-rc2 + your cf1ad559a2 + &pmic { regulators { vref_ddr-supply = <&reg_5v2>; }

Just to know, Did you test v5.10-rc2 + vref_ddr-supply = <&reg_5v2>; ? 
(which seems to correspond to the patch I sent for DK/EV STM32 boards)

> boots correctly as well:
> 
> [    1.151531] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180759] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.189543] vddcore: supplied by regulator-dummy
> [    1.195651] vdd_ddr: supplied by regulator-dummy
> [    1.201687] vdd: supplied by regulator-dummy
> [    1.207470] v3v3: supplied by 5V2
> [    1.212015] v1v8_audio: supplied by v3v3
> [    1.218053] v3v3_hdmi: supplied by 5V2
> [    1.223647] vtt_ddr: supplied by regulator-dummy
> [    1.227128] vdd_usb: supplied by regulator-dummy
> [    1.234553] vdda: supplied by 5V2
> [    1.239510] v1v2_hdmi: supplied by v3v3
> [    1.244932] vref_ddr: supplied by 5V2
> [    1.247397] bst_out: supplied by 5V2
> [    1.251338] vbus_otg: supplied by bst_out
> [    1.255416] vbus_sw: supplied by bst_out
> 
> 
> Cheers
> Ahmad
> 
>>
>> Best Regards,
>> Michał Mirosław
>>
>>
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-04 10:28             ` Ahmad Fatoum
@ 2020-11-05  2:57               ` Michał Mirosław
  -1 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-11-05  2:57 UTC (permalink / raw)
  To: Ahmad Fatoum
  Cc: Corentin Labbe, lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32, Pengutronix Kernel Team

On Wed, Nov 04, 2020 at 11:28:45AM +0100, Ahmad Fatoum wrote:
> Hello,
> 
> On 11/2/20 9:27 PM, Michał Mirosław wrote:
> > On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
> >> Hello Michał,
> >>
> >> CC += linux-stm32
> >>
> >> On 10/24/20 1:53 PM, Michał Mirosław wrote:
> >>> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> >>>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> >>>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> >>>>> I have just saw thoses 3 lines which are probably the real problem.
> >>>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> >>>>>
> >>>>
> >>>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> >>>> Reverting this fix my problem.
> >>
> >> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
> >> has a vref_ddr regulator, which does not have a dedicated supply, but without
> >> a vref_ddr-supply property the system now no longer boots.
> > [...]
> > 
> > Can you catch debug logs for the bootup in question? I'm not sure what's
> > the failure mode in your case. I guess this is not a bypassed regulator?
> 
> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
> to get voltage from unresolved supply") hangs:
> 
> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.189526] vddcore: supplied by regulator-dummy
> [    1.195633] vdd_ddr: supplied by regulator-dummy
> [    1.201672] vdd: supplied by regulator-dummy
> [    1.207452] v3v3: supplied by 5V2
> [    1.211997] v1v8_audio: supplied by v3v3
> [    1.218036] v3v3_hdmi: supplied by 5V2
> [    1.223626] vtt_ddr: supplied by regulator-dummy
> [    1.227107] vdd_usb: supplied by regulator-dummy
> [    1.234532] vdda: supplied by 5V2
> [    1.239497] v1v2_hdmi: supplied by v3v3
[...]

Can you try with the patches I just sent and with debug logs enabled?

The first one just plugs a memory leak, but if there is some state
changed/saved in the rdev->constraints (can't find that code, though),
this might prevent it from being overwritten.

The second patch will just tell us if you hit the early resolve case.

Best Regards,
Michał Mirosław

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-05  2:57               ` Michał Mirosław
  0 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-11-05  2:57 UTC (permalink / raw)
  To: Ahmad Fatoum
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

On Wed, Nov 04, 2020 at 11:28:45AM +0100, Ahmad Fatoum wrote:
> Hello,
> 
> On 11/2/20 9:27 PM, Michał Mirosław wrote:
> > On Mon, Nov 02, 2020 at 01:48:54PM +0100, Ahmad Fatoum wrote:
> >> Hello Michał,
> >>
> >> CC += linux-stm32
> >>
> >> On 10/24/20 1:53 PM, Michał Mirosław wrote:
> >>> On Fri, Oct 23, 2020 at 10:39:43PM +0200, Corentin Labbe wrote:
> >>>> On Fri, Oct 23, 2020 at 03:42:01PM +0200, Corentin Labbe wrote:
> >>>>> On Wed, Oct 21, 2020 at 08:31:49PM +0200, Corentin Labbe wrote:
> >>>>> I have just saw thoses 3 lines which are probably the real problem.
> >>>>> I have started a new bisect with this error, but it is hitting the same "crash range" the first one.
> >>>>>
> >>>>
> >>>> I have bisected the problem to commit aea6cb99703e17019e025aa71643b4d3e0a24413 ("regulator: resolve supply after creating regulator")
> >>>> Reverting this fix my problem.
> >>
> >> The change broke boot on all the STM32MP1 boards, because the STPMIC driver
> >> has a vref_ddr regulator, which does not have a dedicated supply, but without
> >> a vref_ddr-supply property the system now no longer boots.
> > [...]
> > 
> > Can you catch debug logs for the bootup in question? I'm not sure what's
> > the failure mode in your case. I guess this is not a bypassed regulator?
> 
> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
> to get voltage from unresolved supply") hangs:
> 
> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
> [    1.189526] vddcore: supplied by regulator-dummy
> [    1.195633] vdd_ddr: supplied by regulator-dummy
> [    1.201672] vdd: supplied by regulator-dummy
> [    1.207452] v3v3: supplied by 5V2
> [    1.211997] v1v8_audio: supplied by v3v3
> [    1.218036] v3v3_hdmi: supplied by 5V2
> [    1.223626] vtt_ddr: supplied by regulator-dummy
> [    1.227107] vdd_usb: supplied by regulator-dummy
> [    1.234532] vdda: supplied by 5V2
> [    1.239497] v1v2_hdmi: supplied by v3v3
[...]

Can you try with the patches I just sent and with debug logs enabled?

The first one just plugs a memory leak, but if there is some state
changed/saved in the rdev->constraints (can't find that code, though),
this might prevent it from being overwritten.

The second patch will just tell us if you hit the early resolve case.

Best Regards,
Michał Mirosław

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [Linux-stm32] [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-04 10:50               ` Alexandre Torgue
@ 2020-11-05  8:47                 ` Ahmad Fatoum
  -1 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-05  8:47 UTC (permalink / raw)
  To: Alexandre Torgue, Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hello Alex,

On 11/4/20 11:50 AM, Alexandre Torgue wrote:
>> Boot up with v5.10-rc2 + your cf1ad559a2 + &pmic { regulators { vref_ddr-supply = <&reg_5v2>; }
> 
> Just to know, Did you test v5.10-rc2 + vref_ddr-supply = <&reg_5v2>; ? (which seems to correspond to the patch I sent for DK/EV STM32 boards)

I did yes, it masks the issue and allows the system to boot.

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [Linux-stm32] [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-05  8:47                 ` Ahmad Fatoum
  0 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-05  8:47 UTC (permalink / raw)
  To: Alexandre Torgue, Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hello Alex,

On 11/4/20 11:50 AM, Alexandre Torgue wrote:
>> Boot up with v5.10-rc2 + your cf1ad559a2 + &pmic { regulators { vref_ddr-supply = <&reg_5v2>; }
> 
> Just to know, Did you test v5.10-rc2 + vref_ddr-supply = <&reg_5v2>; ? (which seems to correspond to the patch I sent for DK/EV STM32 boards)

I did yes, it masks the issue and allows the system to boot.

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-05  2:57               ` Michał Mirosław
@ 2020-11-05  9:11                 ` Ahmad Fatoum
  -1 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-05  9:11 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: Corentin Labbe, lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32, Pengutronix Kernel Team

Hello,

On 11/5/20 3:57 AM, Michał Mirosław wrote:
>>> Can you catch debug logs for the bootup in question? I'm not sure what's
>>> the failure mode in your case. I guess this is not a bypassed regulator?
>>
>> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
>> to get voltage from unresolved supply") hangs:
>>
>> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
>> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
>> [    1.189526] vddcore: supplied by regulator-dummy
>> [    1.195633] vdd_ddr: supplied by regulator-dummy
>> [    1.201672] vdd: supplied by regulator-dummy
>> [    1.207452] v3v3: supplied by 5V2
>> [    1.211997] v1v8_audio: supplied by v3v3
>> [    1.218036] v3v3_hdmi: supplied by 5V2
>> [    1.223626] vtt_ddr: supplied by regulator-dummy
>> [    1.227107] vdd_usb: supplied by regulator-dummy
>> [    1.234532] vdda: supplied by 5V2
>> [    1.239497] v1v2_hdmi: supplied by v3v3
> [...]
> 
> Can you try with the patches I just sent and with debug logs enabled?
> 
> The first one just plugs a memory leak, but if there is some state
> changed/saved in the rdev->constraints (can't find that code, though),
> this might prevent it from being overwritten.
> 
> The second patch will just tell us if you hit the early resolve case.

Problem still persists. Early resolve case not hit:

[    1.231096] i2c /dev entries driver
[    1.258111] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.258348] edt_ft5x06 0-0038: Looking up vcc-supply from device tree
[    1.287207] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.295810] vddcore: 1200 <--> 1350 mV at 1200 mV, enabled
[    1.300108] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply from device tree
[    1.309747] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.323526] vddcore: supplied by regulator-dummy
[    1.334951] vdd_ddr: 1350 mV, enabled
[    1.337356] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply from device tree
[    1.347016] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.360805] vdd_ddr: supplied by regulator-dummy
[    1.372166] vdd: 3300 mV, enabled
[    1.374211] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply from device tree
[    1.383863] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.397656] vdd: supplied by regulator-dummy
[    1.408473] v3v3: 3300 mV, enabled
[    1.410597] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck4-supply from device tree
[    1.420244] v3v3: supplied by 5V2
[    1.428843] v1v8_audio: 1800 mV, enabled
[    1.431502] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo1-supply from device tree
[    1.441049] v1v8_audio: supplied by v3v3
[    1.451744] v3v3_hdmi: 3300 mV, enabled
[    1.454310] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo2-supply from device tree
[    1.463864] v3v3_hdmi: supplied by 5V2
[    1.471367] vtt_ddr: override max_uV, 750000 -> 500000
[    1.478650] vtt_ddr: 500 mV, enabled
[    1.480958] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply from device tree
[    1.490526] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.504227] vtt_ddr: supplied by regulator-dummy
[    1.513158] vdd_usb: 3300 mV, enabled
[    1.516875] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply from device tree
[    1.526410] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.540133] vdd_usb: supplied by regulator-dummy
[    1.551741] vdda: 2900 mV, enabled
[    1.553864] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo5-supply from device tree
[    1.563415] vdda: supplied by 5V2
[    1.572357] v1v2_hdmi: 1200 mV, enabled
[    1.574970] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo6-supply from device tree
[    1.584441] v1v2_hdmi: supplied by v3v3
[    1.594492] vref_ddr: at 500 mV, enabled
[    1.597047] edt_ft5x06 0-0038: touchscreen probe failed
[    1.597211] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.612406] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed


  [ snip - continues many times ]

[    6.699244] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    6.713312] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    6.723328] Kernel panic - not syncing: corrupted stack end detected inside scheduler
[    6.731288] CPU1: stopping
[    6.734028] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.0-rc2-00007-gd12735e25a7c-dirty #135
[    6.742882] Hardware name: STM32 (Device Tree Support)
[    6.748147] [<c010c05c>] (unwind_backtrace) from [<c0109ad0>] (show_stack+0x10/0x14)
[    6.756014] [<c0109ad0>] (show_stack) from [<c0727938>] (dump_stack+0x94/0xa8)
[    6.763368] [<c0727938>] (dump_stack) from [<c010a9b0>] (do_handle_IPI+0xf4/0x11c)
[    6.771075] [<c010a9b0>] (do_handle_IPI) from [<c010a9f0>] (ipi_handler+0x18/0x20)
[    6.778791] [<c010a9f0>] (ipi_handler) from [<c016bf7c>] (__handle_domain_irq+0x80/0xd4)
[    6.787034] [<c016bf7c>] (__handle_domain_irq) from [<c0421640>] (gic_handle_irq+0x70/0x84)
[    6.795540] [<c0421640>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0xa8)
[    6.803153] Exception stack(0xc1087f58 to 0xc1087fa0)
[    6.808295] 7f40:                                                       00000000 00000a68
[    6.816631] 7f60: deb3db84 c01156a0 c1086000 00000001 c0b04ed0 c0b04f10 00000000 c0a425b0
[    6.824964] 7f80: 00000000 c1087fb0 c0b04f88 c1087fa8 c0107020 c0107024 60000013 ffffffff
[    6.833303] [<c0100b0c>] (__irq_svc) from [<c0107024>] (arch_cpu_idle+0x38/0x3c)
[    6.840835] [<c0107024>] (arch_cpu_idle) from [<c014a3b4>] (do_idle+0x218/0x270)
[    6.848368] [<c014a3b4>] (do_idle) from [<c014a6e0>] (cpu_startup_entry+0x18/0x20)
[    6.856079] [<c014a6e0>] (cpu_startup_entry) from [<c010156c>] (__enableNOTICE:  CPU: STM32MP157C?? Rev.





> 
> Best Regards,
> Michał Mirosław
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-05  9:11                 ` Ahmad Fatoum
  0 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-05  9:11 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hello,

On 11/5/20 3:57 AM, Michał Mirosław wrote:
>>> Can you catch debug logs for the bootup in question? I'm not sure what's
>>> the failure mode in your case. I guess this is not a bypassed regulator?
>>
>> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
>> to get voltage from unresolved supply") hangs:
>>
>> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
>> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
>> [    1.189526] vddcore: supplied by regulator-dummy
>> [    1.195633] vdd_ddr: supplied by regulator-dummy
>> [    1.201672] vdd: supplied by regulator-dummy
>> [    1.207452] v3v3: supplied by 5V2
>> [    1.211997] v1v8_audio: supplied by v3v3
>> [    1.218036] v3v3_hdmi: supplied by 5V2
>> [    1.223626] vtt_ddr: supplied by regulator-dummy
>> [    1.227107] vdd_usb: supplied by regulator-dummy
>> [    1.234532] vdda: supplied by 5V2
>> [    1.239497] v1v2_hdmi: supplied by v3v3
> [...]
> 
> Can you try with the patches I just sent and with debug logs enabled?
> 
> The first one just plugs a memory leak, but if there is some state
> changed/saved in the rdev->constraints (can't find that code, though),
> this might prevent it from being overwritten.
> 
> The second patch will just tell us if you hit the early resolve case.

Problem still persists. Early resolve case not hit:

[    1.231096] i2c /dev entries driver
[    1.258111] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
[    1.258348] edt_ft5x06 0-0038: Looking up vcc-supply from device tree
[    1.287207] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.295810] vddcore: 1200 <--> 1350 mV at 1200 mV, enabled
[    1.300108] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply from device tree
[    1.309747] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.323526] vddcore: supplied by regulator-dummy
[    1.334951] vdd_ddr: 1350 mV, enabled
[    1.337356] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply from device tree
[    1.347016] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.360805] vdd_ddr: supplied by regulator-dummy
[    1.372166] vdd: 3300 mV, enabled
[    1.374211] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply from device tree
[    1.383863] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.397656] vdd: supplied by regulator-dummy
[    1.408473] v3v3: 3300 mV, enabled
[    1.410597] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck4-supply from device tree
[    1.420244] v3v3: supplied by 5V2
[    1.428843] v1v8_audio: 1800 mV, enabled
[    1.431502] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo1-supply from device tree
[    1.441049] v1v8_audio: supplied by v3v3
[    1.451744] v3v3_hdmi: 3300 mV, enabled
[    1.454310] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo2-supply from device tree
[    1.463864] v3v3_hdmi: supplied by 5V2
[    1.471367] vtt_ddr: override max_uV, 750000 -> 500000
[    1.478650] vtt_ddr: 500 mV, enabled
[    1.480958] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply from device tree
[    1.490526] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.504227] vtt_ddr: supplied by regulator-dummy
[    1.513158] vdd_usb: 3300 mV, enabled
[    1.516875] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply from device tree
[    1.526410] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.540133] vdd_usb: supplied by regulator-dummy
[    1.551741] vdda: 2900 mV, enabled
[    1.553864] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo5-supply from device tree
[    1.563415] vdda: supplied by 5V2
[    1.572357] v1v2_hdmi: 1200 mV, enabled
[    1.574970] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo6-supply from device tree
[    1.584441] v1v2_hdmi: supplied by v3v3
[    1.594492] vref_ddr: at 500 mV, enabled
[    1.597047] edt_ft5x06 0-0038: touchscreen probe failed
[    1.597211] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.612406] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed


  [ snip - continues many times ]

[    6.699244] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    6.713312] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    6.723328] Kernel panic - not syncing: corrupted stack end detected inside scheduler
[    6.731288] CPU1: stopping
[    6.734028] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.0-rc2-00007-gd12735e25a7c-dirty #135
[    6.742882] Hardware name: STM32 (Device Tree Support)
[    6.748147] [<c010c05c>] (unwind_backtrace) from [<c0109ad0>] (show_stack+0x10/0x14)
[    6.756014] [<c0109ad0>] (show_stack) from [<c0727938>] (dump_stack+0x94/0xa8)
[    6.763368] [<c0727938>] (dump_stack) from [<c010a9b0>] (do_handle_IPI+0xf4/0x11c)
[    6.771075] [<c010a9b0>] (do_handle_IPI) from [<c010a9f0>] (ipi_handler+0x18/0x20)
[    6.778791] [<c010a9f0>] (ipi_handler) from [<c016bf7c>] (__handle_domain_irq+0x80/0xd4)
[    6.787034] [<c016bf7c>] (__handle_domain_irq) from [<c0421640>] (gic_handle_irq+0x70/0x84)
[    6.795540] [<c0421640>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0xa8)
[    6.803153] Exception stack(0xc1087f58 to 0xc1087fa0)
[    6.808295] 7f40:                                                       00000000 00000a68
[    6.816631] 7f60: deb3db84 c01156a0 c1086000 00000001 c0b04ed0 c0b04f10 00000000 c0a425b0
[    6.824964] 7f80: 00000000 c1087fb0 c0b04f88 c1087fa8 c0107020 c0107024 60000013 ffffffff
[    6.833303] [<c0100b0c>] (__irq_svc) from [<c0107024>] (arch_cpu_idle+0x38/0x3c)
[    6.840835] [<c0107024>] (arch_cpu_idle) from [<c014a3b4>] (do_idle+0x218/0x270)
[    6.848368] [<c014a3b4>] (do_idle) from [<c014a6e0>] (cpu_startup_entry+0x18/0x20)
[    6.856079] [<c014a6e0>] (cpu_startup_entry) from [<c010156c>] (__enableNOTICE:  CPU: STM32MP157C?? Rev.





> 
> Best Regards,
> Michał Mirosław
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-05  9:11                 ` Ahmad Fatoum
@ 2020-11-08 17:08                   ` Michał Mirosław
  -1 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-11-08 17:08 UTC (permalink / raw)
  To: Ahmad Fatoum
  Cc: Corentin Labbe, lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32, Pengutronix Kernel Team

On Thu, Nov 05, 2020 at 10:11:30AM +0100, Ahmad Fatoum wrote:
> Hello,
> 
> On 11/5/20 3:57 AM, Michał Mirosław wrote:
> >>> Can you catch debug logs for the bootup in question? I'm not sure what's
> >>> the failure mode in your case. I guess this is not a bypassed regulator?
> >>
> >> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
> >> to get voltage from unresolved supply") hangs:
> >>
> >> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> >> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
> >> [    1.189526] vddcore: supplied by regulator-dummy
> >> [    1.195633] vdd_ddr: supplied by regulator-dummy
> >> [    1.201672] vdd: supplied by regulator-dummy
> >> [    1.207452] v3v3: supplied by 5V2
> >> [    1.211997] v1v8_audio: supplied by v3v3
> >> [    1.218036] v3v3_hdmi: supplied by 5V2
> >> [    1.223626] vtt_ddr: supplied by regulator-dummy
> >> [    1.227107] vdd_usb: supplied by regulator-dummy
> >> [    1.234532] vdda: supplied by 5V2
> >> [    1.239497] v1v2_hdmi: supplied by v3v3
> > [...]
> > 
> > Can you try with the patches I just sent and with debug logs enabled?
> > 
> > The first one just plugs a memory leak, but if there is some state
> > changed/saved in the rdev->constraints (can't find that code, though),
> > this might prevent it from being overwritten.
> > 
> > The second patch will just tell us if you hit the early resolve case.
> 
> Problem still persists. Early resolve case not hit:
[...]
> [    1.594492] vref_ddr: at 500 mV, enabled
> [    1.597047] edt_ft5x06 0-0038: touchscreen probe failed
> [    1.597211] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
> [    1.612406] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
> 
>   [ snip - continues many times ]
> 
> [    6.699244] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
> [    6.713312] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree

It seems that final regulator_resolve_supply() is spinning recursively.
Is the regulator name the same as its supply_name? Can you try the patch
below to verify this?

Best Regards
Michał Mirosław

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c84e3b0b63de..983a4bd3e98c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1798,6 +1798,8 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	if (rdev->supply)
 		return 0;
 
+	dev_dbg(dev, "Resolving supply %s for %s\n", rdev->supply_name, rdev->desc->name);
+
 	r = regulator_dev_lookup(dev, rdev->supply_name);
 	if (IS_ERR(r)) {
 		ret = PTR_ERR(r);
@@ -1816,6 +1818,12 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		}
 	}
 
+	if (r == rdev) {
+		dev_err(dev, "Supply for %s (%s) resolved to itself\n",
+			rdev->desc->name, rdev->supply_name);
+		return -EINVAL;
+	}
+
 	/*
 	 * If the supply's parent device is not the same as the
 	 * regulator's parent device, then ensure the parent device

^ permalink raw reply related	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-08 17:08                   ` Michał Mirosław
  0 siblings, 0 replies; 32+ messages in thread
From: Michał Mirosław @ 2020-11-08 17:08 UTC (permalink / raw)
  To: Ahmad Fatoum
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

On Thu, Nov 05, 2020 at 10:11:30AM +0100, Ahmad Fatoum wrote:
> Hello,
> 
> On 11/5/20 3:57 AM, Michał Mirosław wrote:
> >>> Can you catch debug logs for the bootup in question? I'm not sure what's
> >>> the failure mode in your case. I guess this is not a bypassed regulator?
> >>
> >> Boot up with v5.10-rc2 + your cf1ad559a2 ("regulator: defer probe when trying
> >> to get voltage from unresolved supply") hangs:
> >>
> >> [    1.151489] stm32f7-i2c 40015000.i2c: STM32F7 I2C-0 bus adapter
> >> [    1.180698] stpmic1 1-0033: PMIC Chip Version: 0x10
> >> [    1.189526] vddcore: supplied by regulator-dummy
> >> [    1.195633] vdd_ddr: supplied by regulator-dummy
> >> [    1.201672] vdd: supplied by regulator-dummy
> >> [    1.207452] v3v3: supplied by 5V2
> >> [    1.211997] v1v8_audio: supplied by v3v3
> >> [    1.218036] v3v3_hdmi: supplied by 5V2
> >> [    1.223626] vtt_ddr: supplied by regulator-dummy
> >> [    1.227107] vdd_usb: supplied by regulator-dummy
> >> [    1.234532] vdda: supplied by 5V2
> >> [    1.239497] v1v2_hdmi: supplied by v3v3
> > [...]
> > 
> > Can you try with the patches I just sent and with debug logs enabled?
> > 
> > The first one just plugs a memory leak, but if there is some state
> > changed/saved in the rdev->constraints (can't find that code, though),
> > this might prevent it from being overwritten.
> > 
> > The second patch will just tell us if you hit the early resolve case.
> 
> Problem still persists. Early resolve case not hit:
[...]
> [    1.594492] vref_ddr: at 500 mV, enabled
> [    1.597047] edt_ft5x06 0-0038: touchscreen probe failed
> [    1.597211] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
> [    1.612406] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
> 
>   [ snip - continues many times ]
> 
> [    6.699244] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
> [    6.713312] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree

It seems that final regulator_resolve_supply() is spinning recursively.
Is the regulator name the same as its supply_name? Can you try the patch
below to verify this?

Best Regards
Michał Mirosław

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c84e3b0b63de..983a4bd3e98c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1798,6 +1798,8 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	if (rdev->supply)
 		return 0;
 
+	dev_dbg(dev, "Resolving supply %s for %s\n", rdev->supply_name, rdev->desc->name);
+
 	r = regulator_dev_lookup(dev, rdev->supply_name);
 	if (IS_ERR(r)) {
 		ret = PTR_ERR(r);
@@ -1816,6 +1818,12 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		}
 	}
 
+	if (r == rdev) {
+		dev_err(dev, "Supply for %s (%s) resolved to itself\n",
+			rdev->desc->name, rdev->supply_name);
+		return -EINVAL;
+	}
+
 	/*
 	 * If the supply's parent device is not the same as the
 	 * regulator's parent device, then ensure the parent device

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
  2020-11-08 17:08                   ` Michał Mirosław
@ 2020-11-10 10:57                     ` Ahmad Fatoum
  -1 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-10 10:57 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: Corentin Labbe, lgirdwood, mripard, linux-kernel, wens, broonie,
	linux-arm-kernel, linux-stm32, Pengutronix Kernel Team

Hello,

On 11/8/20 6:08 PM, Michał Mirosław wrote:
> On Thu, Nov 05, 2020 at 10:11:30AM +0100, Ahmad Fatoum wrote:
> It seems that final regulator_resolve_supply() is spinning recursively.
> Is the regulator name the same as its supply_name? Can you try the patch
> below to verify this?

Indeed that seems to be the case:

[    1.299103] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.307872] vddcore: 1200 <--> 1350 mV at 1200 mV, enabled
[    1.312173] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck1 for BUCK1
[    1.321083] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply from device tree
[    1.330838] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.344650] vddcore: supplied by regulator-dummy
[    1.352016] vdd_ddr: 1350 mV, enabled
[    1.354421] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck2 for BUCK2
[    1.363341] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply from device tree
[    1.373124] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.386921] vdd_ddr: supplied by regulator-dummy
[    1.394230] vdd: 3300 mV, enabled
[    1.396307] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck3 for BUCK3
[    1.405186] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply from device tree
[    1.414962] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.428790] vdd: supplied by regulator-dummy
[    1.435880] v3v3: 3300 mV, enabled
[    1.438008] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck4 for BUCK4
[    1.446934] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck4-supply from device tree
[    1.456681] v3v3: supplied by 5V2
[    1.462533] v1v8_audio: 1800 mV, enabled
[    1.465218] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo1 for LDO1
[    1.473906] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo1-supply from device tree
[    1.483611] v1v8_audio: supplied by v3v3
[    1.490978] v3v3_hdmi: 3300 mV, enabled
[    1.493551] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo2 for LDO2
[    1.502309] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo2-supply from device tree
[    1.511959] v3v3_hdmi: supplied by 5V2
[    1.516320] vtt_ddr: override max_uV, 750000 -> 500000
[    1.523538] vtt_ddr: 500 mV, enabled
[    1.525881] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo3 for LDO3
[    1.534555] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply from device tree
[    1.544285] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.558017] vtt_ddr: supplied by regulator-dummy
[    1.562874] vdd_usb: 3300 mV, enabled
[    1.566585] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo4 for LDO4
[    1.575297] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply from device tree
[    1.585031] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.598716] vdd_usb: supplied by regulator-dummy
[    1.605030] edt_ft5x06 0-0038: touchscreen probe failed
[    1.606247] vdda: 2900 mV, enabled
[    1.612496] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo5 for LDO5
[    1.621251] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo5-supply from device tree
[    1.630888] vdda: supplied by 5V2
[    1.637155] v1v2_hdmi: 1200 mV, enabled
[    1.639742] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo6 for LDO6
[    1.648473] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo6-supply from device tree
[    1.658143] v1v2_hdmi: supplied by v3v3
[    1.664926] vref_ddr: at 500 mV, enabled
[    1.667597] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.677055] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.687091] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.701181] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.711713] vref_ddr: unable to resolve supply
[    1.716413] bst_out: at 5000 mV, disabled
[    1.720445] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.729920] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.739966] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.754044] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.764580] vref_ddr: unable to resolve supply
[    1.769108] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply boost for BOOST
[    1.778156] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up boost-supply from device tree
[    1.787919] bst_out: supplied by 5V2
[    1.791945] vbus_otg: at 5000 mV, disabled
[    1.795905] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.805314] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.815360] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.829446] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.839987] vref_ddr: unable to resolve supply
[    1.844497] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply pwr_sw1 for VBUS_OTG
[    1.854003] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up pwr_sw1-supply from device tree
[    1.863959] vbus_otg: supplied by bst_out
[    1.868406] vbus_sw: at 5000 mV, disabled
[    1.872223] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.881698] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.891731] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.905814] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.916362] vref_ddr: unable to resolve supply
[    1.920863] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply pwr_sw2 for SW_OUT
[    1.930192] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up pwr_sw2-supply from device tree
[    1.940131] vbus_sw: supplied by bst_out

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [BUG] Error applying setting, reverse things back on lot of devices
@ 2020-11-10 10:57                     ` Ahmad Fatoum
  0 siblings, 0 replies; 32+ messages in thread
From: Ahmad Fatoum @ 2020-11-10 10:57 UTC (permalink / raw)
  To: Michał Mirosław
  Cc: lgirdwood, mripard, linux-kernel, wens, broonie, Corentin Labbe,
	Pengutronix Kernel Team, linux-stm32, linux-arm-kernel

Hello,

On 11/8/20 6:08 PM, Michał Mirosław wrote:
> On Thu, Nov 05, 2020 at 10:11:30AM +0100, Ahmad Fatoum wrote:
> It seems that final regulator_resolve_supply() is spinning recursively.
> Is the regulator name the same as its supply_name? Can you try the patch
> below to verify this?

Indeed that seems to be the case:

[    1.299103] stpmic1 1-0033: PMIC Chip Version: 0x10
[    1.307872] vddcore: 1200 <--> 1350 mV at 1200 mV, enabled
[    1.312173] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck1 for BUCK1
[    1.321083] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply from device tree
[    1.330838] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck1-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.344650] vddcore: supplied by regulator-dummy
[    1.352016] vdd_ddr: 1350 mV, enabled
[    1.354421] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck2 for BUCK2
[    1.363341] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply from device tree
[    1.373124] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck2-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.386921] vdd_ddr: supplied by regulator-dummy
[    1.394230] vdd: 3300 mV, enabled
[    1.396307] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck3 for BUCK3
[    1.405186] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply from device tree
[    1.414962] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.428790] vdd: supplied by regulator-dummy
[    1.435880] v3v3: 3300 mV, enabled
[    1.438008] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply buck4 for BUCK4
[    1.446934] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up buck4-supply from device tree
[    1.456681] v3v3: supplied by 5V2
[    1.462533] v1v8_audio: 1800 mV, enabled
[    1.465218] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo1 for LDO1
[    1.473906] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo1-supply from device tree
[    1.483611] v1v8_audio: supplied by v3v3
[    1.490978] v3v3_hdmi: 3300 mV, enabled
[    1.493551] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo2 for LDO2
[    1.502309] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo2-supply from device tree
[    1.511959] v3v3_hdmi: supplied by 5V2
[    1.516320] vtt_ddr: override max_uV, 750000 -> 500000
[    1.523538] vtt_ddr: 500 mV, enabled
[    1.525881] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo3 for LDO3
[    1.534555] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply from device tree
[    1.544285] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo3-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.558017] vtt_ddr: supplied by regulator-dummy
[    1.562874] vdd_usb: 3300 mV, enabled
[    1.566585] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo4 for LDO4
[    1.575297] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply from device tree
[    1.585031] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo4-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.598716] vdd_usb: supplied by regulator-dummy
[    1.605030] edt_ft5x06 0-0038: touchscreen probe failed
[    1.606247] vdda: 2900 mV, enabled
[    1.612496] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo5 for LDO5
[    1.621251] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo5-supply from device tree
[    1.630888] vdda: supplied by 5V2
[    1.637155] v1v2_hdmi: 1200 mV, enabled
[    1.639742] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply ldo6 for LDO6
[    1.648473] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up ldo6-supply from device tree
[    1.658143] v1v2_hdmi: supplied by v3v3
[    1.664926] vref_ddr: at 500 mV, enabled
[    1.667597] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.677055] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.687091] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.701181] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.711713] vref_ddr: unable to resolve supply
[    1.716413] bst_out: at 5000 mV, disabled
[    1.720445] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.729920] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.739966] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.754044] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.764580] vref_ddr: unable to resolve supply
[    1.769108] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply boost for BOOST
[    1.778156] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up boost-supply from device tree
[    1.787919] bst_out: supplied by 5V2
[    1.791945] vbus_otg: at 5000 mV, disabled
[    1.795905] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.805314] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.815360] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.829446] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.839987] vref_ddr: unable to resolve supply
[    1.844497] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply pwr_sw1 for VBUS_OTG
[    1.854003] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up pwr_sw1-supply from device tree
[    1.863959] vbus_otg: supplied by bst_out
[    1.868406] vbus_sw: at 5000 mV, disabled
[    1.872223] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply vref_ddr for VREF_DDR
[    1.881698] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply from device tree
[    1.891731] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up vref_ddr-supply property in node /soc/i2c@5c002000/stpmic@33/regulators failed
[    1.905814] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Supply for VREF_DDR (vref_ddr) resolved to itself
[    1.916362] vref_ddr: unable to resolve supply
[    1.920863] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Resolving supply pwr_sw2 for SW_OUT
[    1.930192] stpmic1-regulator 5c002000.i2c:stpmic@33:regulators: Looking up pwr_sw2-supply from device tree
[    1.940131] vbus_sw: supplied by bst_out

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 32+ messages in thread

end of thread, other threads:[~2020-11-10 10:58 UTC | newest]

Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-21 18:31 [BUG] Error applying setting, reverse things back on lot of devices Corentin Labbe
2020-10-21 18:31 ` Corentin Labbe
2020-10-23 13:42 ` Corentin Labbe
2020-10-23 13:42   ` Corentin Labbe
2020-10-23 20:39   ` Corentin Labbe
2020-10-23 20:39     ` Corentin Labbe
2020-10-24 11:40     ` Michał Miosław
2020-10-24 11:40       ` Michał Miosław
2020-10-24 11:53     ` Michał Mirosław
2020-10-24 11:53       ` Michał Mirosław
2020-11-01  1:31       ` Ondřej Jirman
2020-11-01  1:31         ` Ondřej Jirman
2020-11-02  7:40         ` Corentin Labbe
2020-11-02  7:40           ` Corentin Labbe
2020-11-02 12:48       ` Ahmad Fatoum
2020-11-02 12:48         ` Ahmad Fatoum
2020-11-02 20:27         ` Michał Mirosław
2020-11-02 20:27           ` Michał Mirosław
2020-11-04 10:28           ` Ahmad Fatoum
2020-11-04 10:28             ` Ahmad Fatoum
2020-11-04 10:50             ` [Linux-stm32] " Alexandre Torgue
2020-11-04 10:50               ` Alexandre Torgue
2020-11-05  8:47               ` Ahmad Fatoum
2020-11-05  8:47                 ` Ahmad Fatoum
2020-11-05  2:57             ` Michał Mirosław
2020-11-05  2:57               ` Michał Mirosław
2020-11-05  9:11               ` Ahmad Fatoum
2020-11-05  9:11                 ` Ahmad Fatoum
2020-11-08 17:08                 ` Michał Mirosław
2020-11-08 17:08                   ` Michał Mirosław
2020-11-10 10:57                   ` Ahmad Fatoum
2020-11-10 10:57                     ` Ahmad Fatoum

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.