From: Shijith Thotton <sthotton@marvell.com>
To: <dev@dpdk.org>, <jerinj@marvell.com>
Cc: Shijith Thotton <sthotton@marvell.com>,
<pbhagavatula@marvell.com>, <harry.van.haaren@intel.com>,
<mattias.ronnblom@ericsson.com>, <mdr@ashroe.eu>
Subject: [PATCH v4 3/5] test/event: test cases to test runtime queue attribute
Date: Mon, 16 May 2022 23:05:49 +0530 [thread overview]
Message-ID: <7f2bd0734a71e6b46496933379df1bac51cc8b0a.1652722314.git.sthotton@marvell.com> (raw)
In-Reply-To: <cover.1652722314.git.sthotton@marvell.com>
Added test cases to test changing of queue QoS attributes priority,
weight and affinity at runtime.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
---
app/test/test_eventdev.c | 201 +++++++++++++++++++++++++++++++++++++++
1 file changed, 201 insertions(+)
diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
index 4f51042bda..336529038e 100644
--- a/app/test/test_eventdev.c
+++ b/app/test/test_eventdev.c
@@ -385,6 +385,201 @@ test_eventdev_queue_attr_priority(void)
return TEST_SUCCESS;
}
+static int
+test_eventdev_queue_attr_priority_runtime(void)
+{
+ uint32_t queue_count, queue_req, prio, deq_cnt;
+ struct rte_event_queue_conf qconf;
+ struct rte_event_port_conf pconf;
+ struct rte_event_dev_info info;
+ struct rte_event event = {
+ .op = RTE_EVENT_OP_NEW,
+ .event_type = RTE_EVENT_TYPE_CPU,
+ .sched_type = RTE_SCHED_TYPE_ATOMIC,
+ .u64 = 0xbadbadba,
+ };
+ int i, ret;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ if (!(info.event_dev_cap & RTE_EVENT_DEV_CAP_RUNTIME_QUEUE_ATTR))
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(
+ TEST_DEV_ID, RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
+ &queue_count),
+ "Queue count get failed");
+
+ /* Need at least 2 queues to test LOW and HIGH priority. */
+ TEST_ASSERT(queue_count > 1, "Not enough event queues, needed 2");
+ queue_req = 2;
+
+ for (i = 0; i < (int)queue_count; i++) {
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue%d def conf", i);
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ ret = rte_event_queue_attr_set(TEST_DEV_ID, 0,
+ RTE_EVENT_QUEUE_ATTR_PRIORITY,
+ RTE_EVENT_DEV_PRIORITY_LOWEST);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+ TEST_ASSERT_SUCCESS(ret, "Queue0 priority set failed");
+
+ ret = rte_event_queue_attr_set(TEST_DEV_ID, 1,
+ RTE_EVENT_QUEUE_ATTR_PRIORITY,
+ RTE_EVENT_DEV_PRIORITY_HIGHEST);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+ TEST_ASSERT_SUCCESS(ret, "Queue1 priority set failed");
+
+ /* Setup event port 0 */
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get port0 info");
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port0");
+ ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
+ TEST_ASSERT(ret == (int)queue_count, "Failed to link port, device %d",
+ TEST_DEV_ID);
+
+ ret = rte_event_dev_start(TEST_DEV_ID);
+ TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
+
+ for (i = 0; i < (int)queue_req; i++) {
+ event.queue_id = i;
+ while (rte_event_enqueue_burst(TEST_DEV_ID, 0, &event, 1) != 1)
+ rte_pause();
+ }
+
+ prio = RTE_EVENT_DEV_PRIORITY_HIGHEST;
+ deq_cnt = 0;
+ while (deq_cnt < queue_req) {
+ uint32_t queue_prio;
+
+ if (rte_event_dequeue_burst(TEST_DEV_ID, 0, &event, 1, 0) == 0)
+ continue;
+
+ ret = rte_event_queue_attr_get(TEST_DEV_ID, event.queue_id,
+ RTE_EVENT_QUEUE_ATTR_PRIORITY,
+ &queue_prio);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(ret, "Queue priority get failed");
+ TEST_ASSERT(queue_prio >= prio,
+ "Received event from a lower priority queue first");
+ prio = queue_prio;
+ deq_cnt++;
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_queue_attr_weight_runtime(void)
+{
+ struct rte_event_queue_conf qconf;
+ struct rte_event_dev_info info;
+ uint32_t queue_count;
+ int i, ret;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ if (!(info.event_dev_cap & RTE_EVENT_DEV_CAP_RUNTIME_QUEUE_ATTR))
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(
+ TEST_DEV_ID, RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
+ &queue_count),
+ "Queue count get failed");
+
+ for (i = 0; i < (int)queue_count; i++) {
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue%d def conf", i);
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ for (i = 0; i < (int)queue_count; i++) {
+ uint32_t get_val;
+ uint64_t set_val;
+
+ set_val = i % RTE_EVENT_QUEUE_WEIGHT_HIGHEST;
+ ret = rte_event_queue_attr_set(
+ TEST_DEV_ID, i, RTE_EVENT_QUEUE_ATTR_WEIGHT, set_val);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(ret, "Queue weight set failed");
+
+ ret = rte_event_queue_attr_get(
+ TEST_DEV_ID, i, RTE_EVENT_QUEUE_ATTR_WEIGHT, &get_val);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(ret, "Queue weight get failed");
+ TEST_ASSERT_EQUAL(get_val, set_val,
+ "Wrong weight value for queue%d", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_queue_attr_affinity_runtime(void)
+{
+ struct rte_event_queue_conf qconf;
+ struct rte_event_dev_info info;
+ uint32_t queue_count;
+ int i, ret;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ if (!(info.event_dev_cap & RTE_EVENT_DEV_CAP_RUNTIME_QUEUE_ATTR))
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(rte_event_dev_attr_get(
+ TEST_DEV_ID, RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
+ &queue_count),
+ "Queue count get failed");
+
+ for (i = 0; i < (int)queue_count; i++) {
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue%d def conf", i);
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ for (i = 0; i < (int)queue_count; i++) {
+ uint32_t get_val;
+ uint64_t set_val;
+
+ set_val = i % RTE_EVENT_QUEUE_AFFINITY_HIGHEST;
+ ret = rte_event_queue_attr_set(
+ TEST_DEV_ID, i, RTE_EVENT_QUEUE_ATTR_AFFINITY, set_val);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(ret, "Queue affinity set failed");
+
+ ret = rte_event_queue_attr_get(
+ TEST_DEV_ID, i, RTE_EVENT_QUEUE_ATTR_AFFINITY, &get_val);
+ if (ret == -ENOTSUP)
+ return TEST_SKIPPED;
+
+ TEST_ASSERT_SUCCESS(ret, "Queue affinity get failed");
+ TEST_ASSERT_EQUAL(get_val, set_val,
+ "Wrong affinity value for queue%d", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
static int
test_eventdev_queue_attr_nb_atomic_flows(void)
{
@@ -964,6 +1159,12 @@ static struct unit_test_suite eventdev_common_testsuite = {
test_eventdev_queue_count),
TEST_CASE_ST(eventdev_configure_setup, NULL,
test_eventdev_queue_attr_priority),
+ TEST_CASE_ST(eventdev_configure_setup, eventdev_stop_device,
+ test_eventdev_queue_attr_priority_runtime),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_queue_attr_weight_runtime),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_queue_attr_affinity_runtime),
TEST_CASE_ST(eventdev_configure_setup, NULL,
test_eventdev_queue_attr_nb_atomic_flows),
TEST_CASE_ST(eventdev_configure_setup, NULL,
--
2.25.1
next prev parent reply other threads:[~2022-05-16 17:39 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-29 13:10 [PATCH 0/6] Extend and set event queue attributes at runtime Shijith Thotton
2022-03-29 13:11 ` [PATCH 1/6] eventdev: support to set " Shijith Thotton
2022-03-30 10:58 ` Van Haaren, Harry
2022-04-04 9:35 ` Shijith Thotton
2022-04-04 9:45 ` Van Haaren, Harry
2022-03-30 12:14 ` Mattias Rönnblom
2022-04-04 11:45 ` Shijith Thotton
2022-03-29 13:11 ` [PATCH 2/6] eventdev: add weight and affinity to queue attributes Shijith Thotton
2022-03-30 12:12 ` Mattias Rönnblom
2022-04-04 9:33 ` Shijith Thotton
2022-03-29 13:11 ` [PATCH 3/6] doc: announce change in event queue conf structure Shijith Thotton
2022-03-29 13:11 ` [PATCH 4/6] test/event: test cases to test runtime queue attribute Shijith Thotton
2022-03-29 13:11 ` [PATCH 5/6] event/cnxk: support to set runtime queue attributes Shijith Thotton
2022-03-30 11:05 ` Van Haaren, Harry
2022-04-04 7:59 ` Shijith Thotton
2022-03-29 13:11 ` [PATCH 6/6] common/cnxk: use lock when accessing mbox of SSO Shijith Thotton
2022-03-29 18:49 ` [PATCH 0/6] Extend and set event queue attributes at runtime Jerin Jacob
2022-03-30 10:52 ` Van Haaren, Harry
2022-04-04 7:57 ` Shijith Thotton
2022-04-05 5:40 ` [PATCH v2 " Shijith Thotton
2022-04-05 5:40 ` [PATCH v2 1/6] eventdev: support to set " Shijith Thotton
2022-05-09 12:43 ` Jerin Jacob
2022-04-05 5:40 ` [PATCH v2 2/6] eventdev: add weight and affinity to queue attributes Shijith Thotton
2022-05-09 12:46 ` Jerin Jacob
2022-04-05 5:41 ` [PATCH v2 3/6] doc: announce change in event queue conf structure Shijith Thotton
2022-05-09 12:47 ` Jerin Jacob
2022-05-15 10:24 ` [PATCH v3] " Shijith Thotton
2022-07-12 14:05 ` Jerin Jacob
2022-07-13 6:52 ` [EXT] " Pavan Nikhilesh Bhagavatula
2022-07-13 8:55 ` Mattias Rönnblom
2022-07-13 9:56 ` Pavan Nikhilesh Bhagavatula
2022-07-17 12:52 ` Thomas Monjalon
2022-04-05 5:41 ` [PATCH v2 4/6] test/event: test cases to test runtime queue attribute Shijith Thotton
2022-05-09 12:55 ` Jerin Jacob
2022-04-05 5:41 ` [PATCH v2 5/6] event/cnxk: support to set runtime queue attributes Shijith Thotton
2022-05-09 12:57 ` Jerin Jacob
2022-04-05 5:41 ` [PATCH v2 6/6] common/cnxk: use lock when accessing mbox of SSO Shijith Thotton
2022-04-11 11:07 ` [PATCH v2 0/6] Extend and set event queue attributes at runtime Shijith Thotton
2022-05-15 9:53 ` [PATCH v3 0/5] " Shijith Thotton
2022-05-15 9:53 ` [PATCH v3 1/5] eventdev: support to set " Shijith Thotton
2022-05-15 13:11 ` Mattias Rönnblom
2022-05-16 3:57 ` Shijith Thotton
2022-05-16 10:23 ` Mattias Rönnblom
2022-05-16 12:12 ` Shijith Thotton
2022-05-15 9:53 ` [PATCH v3 2/5] eventdev: add weight and affinity to queue attributes Shijith Thotton
2022-05-15 9:53 ` [PATCH v3 3/5] test/event: test cases to test runtime queue attribute Shijith Thotton
2022-05-15 9:53 ` [PATCH v3 4/5] common/cnxk: use lock when accessing mbox of SSO Shijith Thotton
2022-05-15 9:53 ` [PATCH v3 5/5] event/cnxk: support to set runtime queue attributes Shijith Thotton
2022-05-16 17:35 ` [PATCH v4 0/5] Extend and set event queue attributes at runtime Shijith Thotton
2022-05-16 17:35 ` [PATCH v4 1/5] eventdev: support to set " Shijith Thotton
2022-05-16 18:02 ` Jerin Jacob
2022-05-17 8:55 ` Mattias Rönnblom
2022-05-17 13:35 ` Jerin Jacob
2022-05-19 8:49 ` Ray Kinsella
2022-05-16 17:35 ` [PATCH v4 2/5] eventdev: add weight and affinity to queue attributes Shijith Thotton
2022-05-16 17:35 ` Shijith Thotton [this message]
2022-05-16 17:35 ` [PATCH v4 4/5] common/cnxk: use lock when accessing mbox of SSO Shijith Thotton
2022-05-16 17:35 ` [PATCH v4 5/5] event/cnxk: support to set runtime queue attributes Shijith Thotton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7f2bd0734a71e6b46496933379df1bac51cc8b0a.1652722314.git.sthotton@marvell.com \
--to=sthotton@marvell.com \
--cc=dev@dpdk.org \
--cc=harry.van.haaren@intel.com \
--cc=jerinj@marvell.com \
--cc=mattias.ronnblom@ericsson.com \
--cc=mdr@ashroe.eu \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.