All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksandr <olekstysh@gmail.com>
To: Stefano Stabellini <sstabellini@kernel.org>
Cc: xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org,
	Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	Juergen Gross <jgross@suse.com>, Julien Grall <julien@xen.org>
Subject: Re: [RFC PATCH 2/2] xen/grant-table: Use unpopulated DMAable pages instead of real RAM ones
Date: Thu, 9 Jun 2022 21:39:34 +0300	[thread overview]
Message-ID: <7f886dfb-2b42-bc70-d55f-14ecd8144e3e@gmail.com> (raw)
In-Reply-To: <alpine.DEB.2.22.394.2206031348230.2783803@ubuntu-linux-20-04-desktop>


On 04.06.22 00:19, Stefano Stabellini wrote:


Hello Stefano

Thank you for having a look and sorry for the late response.

> On Tue, 17 May 2022, Oleksandr Tyshchenko wrote:
>> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>>
>> Depends on CONFIG_XEN_UNPOPULATED_ALLOC. If enabled then unpopulated
>> DMAable (contiguous) pages will be allocated for grant mapping into
>> instead of ballooning out real RAM pages.
>>
>> TODO: Fallback to real RAM pages if xen_alloc_unpopulated_dma_pages()
>> fails.
>>
>> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>> ---
>>   drivers/xen/grant-table.c | 27 +++++++++++++++++++++++++++
>>   1 file changed, 27 insertions(+)
>>
>> diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
>> index 8ccccac..2bb4392 100644
>> --- a/drivers/xen/grant-table.c
>> +++ b/drivers/xen/grant-table.c
>> @@ -864,6 +864,25 @@ EXPORT_SYMBOL_GPL(gnttab_free_pages);
>>    */
>>   int gnttab_dma_alloc_pages(struct gnttab_dma_alloc_args *args)
>>   {
>> +#ifdef CONFIG_XEN_UNPOPULATED_ALLOC
>> +	int ret;
> This is an alternative implementation of the same function.

Currently, yes.


>   If we are
> going to use #ifdef, then I would #ifdef the entire function, rather
> than just the body. Otherwise within the function body we can use
> IS_ENABLED.


Good point. Note, there is one missing thing in current patch which is 
described in TODO.

"Fallback to real RAM pages if xen_alloc_unpopulated_dma_pages() 
fails."  So I will likely use IS_ENABLED within the function body.

If CONFIG_XEN_UNPOPULATED_ALLOC is enabled then gnttab_dma_alloc_pages() 
will try to call xen_alloc_unpopulated_dma_pages() the first and if 
fails then fallback to allocate RAM pages and balloon them out.

One moment is not entirely clear to me. If we use fallback in 
gnttab_dma_alloc_pages() then we must use fallback in 
gnttab_dma_free_pages() as well, we cannot use 
xen_free_unpopulated_dma_pages() for real RAM pages. The question is how 
to pass this information to the gnttab_dma_free_pages()? The first idea 
which comes to mind is to add a flag to struct gnttab_dma_alloc_args...


>
>> +	ret = xen_alloc_unpopulated_dma_pages(args->dev, args->nr_pages,
>> +			args->pages);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	ret = gnttab_pages_set_private(args->nr_pages, args->pages);
>> +	if (ret < 0) {
>> +		gnttab_dma_free_pages(args);
> it should xen_free_unpopulated_dma_pages ?

Besides calling the xen_free_unpopulated_dma_pages(), we also need to 
call gnttab_pages_clear_private() here, this is what 
gnttab_dma_free_pages() is doing.

I can change to call both function instead:

     gnttab_pages_clear_private(args->nr_pages, args->pages);
     xen_free_unpopulated_dma_pages(args->dev, args->nr_pages, args->pages);

Shall I?


>
>
>> +		return ret;
>> +	}
>> +
>> +	args->vaddr = page_to_virt(args->pages[0]);
>> +	args->dev_bus_addr = page_to_phys(args->pages[0]);
> There are two things to note here.
>
> The first thing to note is that normally we would call pfn_to_bfn to
> retrieve the dev_bus_addr of a page because pfn_to_bfn takes into
> account foreign mappings. However, these are freshly allocated pages
> without foreign mappings, so page_to_phys/dma should be sufficient.

agree


>
>
> The second has to do with physical addresses and DMA addresses. The
> functions are called gnttab_dma_alloc_pages and
> xen_alloc_unpopulated_dma_pages which make you think we are retrieving a
> DMA address here. However, to get a DMA address we need to call
> page_to_dma rather than page_to_phys.
>
> page_to_dma takes into account special offsets that some devices have
> when accessing memory. There are real cases on ARM where the physical
> address != DMA address, e.g. RPi4.

I got it. Now I am in doubt whether it would be better to name the API:

xen_alloc_unpopulated_cma_pages()

or

xen_alloc_unpopulated_contiguous_pages()

What do you think?


>
> However, to call page_to_dma you need to specify as first argument the
> DMA-capable device that is expected to use those pages for DMA (e.g. an
> ethernet device or a MMC controller.) While the args->dev we have in
> gnttab_dma_alloc_pages is the gntdev_miscdev.

agree

As I understand, at this time it is unknown for what exactly device 
these pages are supposed to be used at the end.

For now, it is only known that these pages to be used by userspace PV 
backend for grant mappings.


>
> So this interface cannot actually be used to allocate memory that is
> supposed to be DMA-able by a DMA-capable device, such as an ethernet
> device.

agree


>
> But I think that should be fine because the memory is meant to be used
> by a userspace PV backend for grant mappings. If any of those mappings
> end up being used for actual DMA in the kernel they should go through the
> drivers/xen/swiotlb-xen.c and xen_phys_to_dma should be called, which
> ends up calling page_to_dma as appropriate.
>
> It would be good to double-check that the above is correct and, if so,
> maybe add a short in-code comment about it:
>
> /*
>   * These are not actually DMA addresses but regular physical addresses.
>   * If these pages end up being used in a DMA operation then the
>   * swiotlb-xen functions are called and xen_phys_to_dma takes care of
>   * the address translations:
>   *
>   * - from gfn to bfn in case of foreign mappings
>   * - from physical to DMA addresses in case the two are different for a
>   *   given DMA-mastering device
>   */

I agree this needs to be re-checked. But, there is one moment here, if 
userspace PV backend runs in other than Dom0 domain (non 1:1 mapped 
domain), the xen-swiotlb seems not to be in use then? How to be in this 
case?


>
>
>
>> +	return ret;
>> +#else
>>   	unsigned long pfn, start_pfn;
>>   	size_t size;
>>   	int i, ret;
>> @@ -910,6 +929,7 @@ int gnttab_dma_alloc_pages(struct gnttab_dma_alloc_args *args)
>>   fail:
>>   	gnttab_dma_free_pages(args);
>>   	return ret;
>> +#endif
>>   }
>>   EXPORT_SYMBOL_GPL(gnttab_dma_alloc_pages);
>>   
>> @@ -919,6 +939,12 @@ EXPORT_SYMBOL_GPL(gnttab_dma_alloc_pages);
>>    */
>>   int gnttab_dma_free_pages(struct gnttab_dma_alloc_args *args)
>>   {
>> +#ifdef CONFIG_XEN_UNPOPULATED_ALLOC
>> +	gnttab_pages_clear_private(args->nr_pages, args->pages);
>> +	xen_free_unpopulated_dma_pages(args->dev, args->nr_pages, args->pages);
>> +
>> +	return 0;
>> +#else
>>   	size_t size;
>>   	int i, ret;
>>   
>> @@ -946,6 +972,7 @@ int gnttab_dma_free_pages(struct gnttab_dma_alloc_args *args)
>>   		dma_free_wc(args->dev, size,
>>   			    args->vaddr, args->dev_bus_addr);
>>   	return ret;
>> +#endif
>>   }
>>   EXPORT_SYMBOL_GPL(gnttab_dma_free_pages);
>>   #endif
>> -- 
>> 2.7.4
>>
-- 
Regards,

Oleksandr Tyshchenko


  reply	other threads:[~2022-06-09 18:39 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-17 18:04 [RFC PATCH 0/2] Ability to allocate DMAable pages using unpopulated-alloc Oleksandr Tyshchenko
2022-05-17 18:04 ` [RFC PATCH 1/2] xen/unpopulated-alloc: Introduce helpers for DMA allocations Oleksandr Tyshchenko
2022-06-03 21:52   ` Stefano Stabellini
2022-06-08 18:12     ` Oleksandr
2022-06-11  0:12       ` Stefano Stabellini
2022-06-14 17:37         ` Oleksandr
2022-06-15  0:45           ` Stefano Stabellini
2022-06-15 16:56             ` Oleksandr
2022-06-16  8:49             ` Roger Pau Monné
2022-05-17 18:04 ` [RFC PATCH 2/2] xen/grant-table: Use unpopulated DMAable pages instead of real RAM ones Oleksandr Tyshchenko
2022-06-03 21:19   ` Stefano Stabellini
2022-06-09 18:39     ` Oleksandr [this message]
2022-06-10 23:55       ` Stefano Stabellini
2022-06-14 17:53         ` Oleksandr
2022-06-15  0:51           ` Stefano Stabellini
2022-06-15 16:40             ` Oleksandr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7f886dfb-2b42-bc70-d55f-14ecd8144e3e@gmail.com \
    --to=olekstysh@gmail.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jgross@suse.com \
    --cc=julien@xen.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oleksandr_tyshchenko@epam.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.