All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zidan Wang <zidan.wang@freescale.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org,
	Zidan Wang <zidan.wang@freescale.com>,
	Xiubo.Lee@gmail.com, tiwai@suse.com, nicoleotsuka@gmail.com
Subject: [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate
Date: Fri, 18 Dec 2015 17:00:09 +0800	[thread overview]
Message-ID: <7ff4f7a6d8b3927664f6350232f46c81d6c6be80.1450429119.git.zidan.wang@freescale.com> (raw)

Add 8kHz, 11.025kHz, 16kHz, 22.05kHz output sample rate support.

According referance menual, "Limited support for the case when
output sampling rates is between 8kHz and 30kHz. The limitation
is the supported ratio (Fsin/Fsout) range as between 1/24 to 8."

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
---
v1->v2:
1. fix indentation issue.

 sound/soc/fsl/fsl_asrc.c | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index d964016..bd32c30 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -31,21 +31,21 @@
 	dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
 
 /* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][8][2] = {
-	/* 32kHz 44.1kHz 48kHz   64kHz   88.2kHz 96kHz   176kHz  192kHz */
-	{{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 5512Hz */
-	{{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 8kHz */
-	{{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 11025Hz */
-	{{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 16kHz */
-	{{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 22050Hz */
-	{{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},},	/* 32kHz */
-	{{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},},	/* 44.1kHz */
-	{{0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},},	/* 48kHz */
-	{{1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},},	/* 64kHz */
-	{{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},},	/* 88.2kHz */
-	{{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},},	/* 96kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},},	/* 176kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},},	/* 192kHz */
+static const u8 process_option[][12][2] = {
+	/* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz   64kHz   88.2kHz 96kHz   176kHz  192kHz */
+	{{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 5512Hz */
+	{{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 8kHz */
+	{{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 11025Hz */
+	{{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 16kHz */
+	{{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 22050Hz */
+	{{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},},	/* 32kHz */
+	{{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},},	/* 44.1kHz */
+	{{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},},	/* 48kHz */
+	{{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},},	/* 64kHz */
+	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},},	/* 88.2kHz */
+	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},},	/* 96kHz */
+	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},},	/* 176kHz */
+	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},},	/* 192kHz */
 };
 
 /* Corresponding to process_option */
@@ -55,7 +55,7 @@ static int supported_input_rate[] = {
 };
 
 static int supported_asrc_rate[] = {
-	32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
+	8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
 };
 
 /**
@@ -287,6 +287,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
 		return -EINVAL;
 	}
 
+	if ((outrate > 8000 && outrate < 30000) &&
+	    (outrate/inrate > 24 || inrate/outrate > 8)) {
+		pair_err("exceed supported ratio range [1/24, 8] for \
+				inrate/outrate: %d/%d\n", inrate, outrate);
+		return -EINVAL;
+	}
+
 	/* Validate input and output clock sources */
 	clk_index[IN] = clk_map[IN][config->inclk];
 	clk_index[OUT] = clk_map[OUT][config->outclk];
-- 
1.9.1

             reply	other threads:[~2015-12-18  8:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-18  9:00 Zidan Wang [this message]
2015-12-21  7:25 ` [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate Nicolin Chen
2015-12-23  0:08 ` Applied "ASoC: fsl_asrc: add support for 8-30kHz output sample rate" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7ff4f7a6d8b3927664f6350232f46c81d6c6be80.1450429119.git.zidan.wang@freescale.com \
    --to=zidan.wang@freescale.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.