* [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-15 18:19 ` Martin Blumenstingl
0 siblings, 0 replies; 19+ messages in thread
From: Martin Blumenstingl @ 2020-08-15 18:19 UTC (permalink / raw)
To: khilman, linux-amlogic
Cc: linux-arm-kernel, linux-kernel, Martin Blumenstingl, Thomas Graichen
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
re-send of v1 from [0] because it was never picked up
[0] https://patchwork.kernel.org/patch/11582619/
arch/arm/boot/dts/meson8.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 277c0bb10453..04688e8abce2 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -240,8 +240,6 @@ mali: gpu@c0000 {
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
--
2.28.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-15 18:19 ` Martin Blumenstingl
0 siblings, 0 replies; 19+ messages in thread
From: Martin Blumenstingl @ 2020-08-15 18:19 UTC (permalink / raw)
To: khilman, linux-amlogic
Cc: Martin Blumenstingl, Thomas Graichen, linux-kernel, linux-arm-kernel
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
re-send of v1 from [0] because it was never picked up
[0] https://patchwork.kernel.org/patch/11582619/
arch/arm/boot/dts/meson8.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 277c0bb10453..04688e8abce2 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -240,8 +240,6 @@ mali: gpu@c0000 {
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-15 18:19 ` Martin Blumenstingl
0 siblings, 0 replies; 19+ messages in thread
From: Martin Blumenstingl @ 2020-08-15 18:19 UTC (permalink / raw)
To: khilman, linux-amlogic
Cc: Martin Blumenstingl, Thomas Graichen, linux-kernel, linux-arm-kernel
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
re-send of v1 from [0] because it was never picked up
[0] https://patchwork.kernel.org/patch/11582619/
arch/arm/boot/dts/meson8.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 277c0bb10453..04688e8abce2 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -240,8 +240,6 @@ mali: gpu@c0000 {
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
--
2.28.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
2020-08-15 18:19 ` Martin Blumenstingl
(?)
@ 2020-08-23 20:25 ` Thomas Graichen
-1 siblings, 0 replies; 19+ messages in thread
From: Thomas Graichen @ 2020-08-23 20:25 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: khilman, linux-amlogic, linux-arm-kernel, linux-kernel
On Sat, Aug 15, 2020 at 8:20 PM Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
sorry - looks like i missed this one
> ---
> re-send of v1 from [0] because it was never picked up
>
>
> [0] https://patchwork.kernel.org/patch/11582619/
>
>
> arch/arm/boot/dts/meson8.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 277c0bb10453..04688e8abce2 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -240,8 +240,6 @@ mali: gpu@c0000 {
> <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-23 20:25 ` Thomas Graichen
0 siblings, 0 replies; 19+ messages in thread
From: Thomas Graichen @ 2020-08-23 20:25 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: khilman, linux-kernel, linux-arm-kernel, linux-amlogic
On Sat, Aug 15, 2020 at 8:20 PM Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
sorry - looks like i missed this one
> ---
> re-send of v1 from [0] because it was never picked up
>
>
> [0] https://patchwork.kernel.org/patch/11582619/
>
>
> arch/arm/boot/dts/meson8.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 277c0bb10453..04688e8abce2 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -240,8 +240,6 @@ mali: gpu@c0000 {
> <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
> --
> 2.28.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-23 20:25 ` Thomas Graichen
0 siblings, 0 replies; 19+ messages in thread
From: Thomas Graichen @ 2020-08-23 20:25 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: khilman, linux-kernel, linux-arm-kernel, linux-amlogic
On Sat, Aug 15, 2020 at 8:20 PM Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
sorry - looks like i missed this one
> ---
> re-send of v1 from [0] because it was never picked up
>
>
> [0] https://patchwork.kernel.org/patch/11582619/
>
>
> arch/arm/boot/dts/meson8.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 277c0bb10453..04688e8abce2 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -240,8 +240,6 @@ mali: gpu@c0000 {
> <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
> --
> 2.28.0
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
2020-08-15 18:19 ` Martin Blumenstingl
` (2 preceding siblings ...)
(?)
@ 2020-08-24 8:04 ` Neil Armstrong
-1 siblings, 0 replies; 19+ messages in thread
From: Neil Armstrong @ 2020-08-24 8:04 UTC (permalink / raw)
To: linux-amlogic
On 15/08/2020 20:19, Martin Blumenstingl wrote:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> re-send of v1 from [0] because it was never picked up
>
>
> [0] https://patchwork.kernel.org/patch/11582619/
>
>
> arch/arm/boot/dts/meson8.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 277c0bb10453..04688e8abce2 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -240,8 +240,6 @@ mali: gpu@c0000 {
> <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
2020-08-15 18:19 ` Martin Blumenstingl
(?)
@ 2020-08-24 20:36 ` Kevin Hilman
-1 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-08-24 20:36 UTC (permalink / raw)
To: Martin Blumenstingl, linux-amlogic
Cc: linux-arm-kernel, linux-kernel, Martin Blumenstingl, Thomas Graichen
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> re-send of v1 from [0] because it was never picked up
Oops, sorry this fell through the cracks. Now Queued for v5.9-rc1.
Kevin
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-24 20:36 ` Kevin Hilman
0 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-08-24 20:36 UTC (permalink / raw)
To: Martin Blumenstingl, linux-amlogic
Cc: Martin Blumenstingl, Thomas Graichen, linux-kernel, linux-arm-kernel
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> re-send of v1 from [0] because it was never picked up
Oops, sorry this fell through the cracks. Now Queued for v5.9-rc1.
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-24 20:36 ` Kevin Hilman
0 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-08-24 20:36 UTC (permalink / raw)
To: Martin Blumenstingl, linux-amlogic
Cc: Martin Blumenstingl, Thomas Graichen, linux-kernel, linux-arm-kernel
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> However, the driver from the 3.10 vendor kernel does not use the
> following four interrupt lines:
> - INT_MALI_PP3
> - INT_MALI_PP3_MMU
> - INT_MALI_PP7
> - INT_MALI_PP7_MMU
>
> Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
> because there is no matching entry in interrupt-names for it (meaning
> the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
>
> Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
> Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> re-send of v1 from [0] because it was never picked up
Oops, sorry this fell through the cracks. Now Queued for v5.9-rc1.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
2020-08-15 18:19 ` Martin Blumenstingl
(?)
@ 2020-08-24 21:16 ` Kevin Hilman
-1 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-08-24 21:16 UTC (permalink / raw)
To: linux-amlogic, Martin Blumenstingl
Cc: linux-arm-kernel, linux-kernel, Thomas Graichen
On Sat, 15 Aug 2020 20:19:57 +0200, Martin Blumenstingl wrote:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> [...]
Applied, thanks!
[1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
commit: b468412409c0e5752ad3396b147cac563ff8dd3b
Best regards,
--
Kevin Hilman <khilman@baylibre.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-24 21:16 ` Kevin Hilman
0 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-08-24 21:16 UTC (permalink / raw)
To: linux-amlogic, Martin Blumenstingl
Cc: Thomas Graichen, linux-kernel, linux-arm-kernel
On Sat, 15 Aug 2020 20:19:57 +0200, Martin Blumenstingl wrote:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> [...]
Applied, thanks!
[1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
commit: b468412409c0e5752ad3396b147cac563ff8dd3b
Best regards,
--
Kevin Hilman <khilman@baylibre.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-08-24 21:16 ` Kevin Hilman
0 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-08-24 21:16 UTC (permalink / raw)
To: linux-amlogic, Martin Blumenstingl
Cc: Thomas Graichen, linux-kernel, linux-arm-kernel
On Sat, 15 Aug 2020 20:19:57 +0200, Martin Blumenstingl wrote:
> The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
> #define INT_MALI_GP AM_IRQ(160)
> #define INT_MALI_GP_MMU AM_IRQ(161)
> #define INT_MALI_PP AM_IRQ(162)
> #define INT_MALI_PMU AM_IRQ(163)
> #define INT_MALI_PP0 AM_IRQ(164)
> #define INT_MALI_PP0_MMU AM_IRQ(165)
> #define INT_MALI_PP1 AM_IRQ(166)
> #define INT_MALI_PP1_MMU AM_IRQ(167)
> #define INT_MALI_PP2 AM_IRQ(168)
> #define INT_MALI_PP2_MMU AM_IRQ(169)
> #define INT_MALI_PP3 AM_IRQ(170)
> #define INT_MALI_PP3_MMU AM_IRQ(171)
> #define INT_MALI_PP4 AM_IRQ(172)
> #define INT_MALI_PP4_MMU AM_IRQ(173)
> #define INT_MALI_PP5 AM_IRQ(174)
> #define INT_MALI_PP5_MMU AM_IRQ(175)
> #define INT_MALI_PP6 AM_IRQ(176)
> #define INT_MALI_PP6_MMU AM_IRQ(177)
> #define INT_MALI_PP7 AM_IRQ(178)
> #define INT_MALI_PP7_MMU AM_IRQ(179)
>
> [...]
Applied, thanks!
[1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
commit: b468412409c0e5752ad3396b147cac563ff8dd3b
Best regards,
--
Kevin Hilman <khilman@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
2020-08-24 21:16 ` Kevin Hilman
(?)
@ 2020-09-25 15:28 ` Martin Blumenstingl
-1 siblings, 0 replies; 19+ messages in thread
From: Martin Blumenstingl @ 2020-09-25 15:28 UTC (permalink / raw)
To: Kevin Hilman
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Thomas Graichen
Hi Kevin,
On Mon, Aug 24, 2020 at 11:16 PM Kevin Hilman <khilman@baylibre.com> wrote:
[...]
> Applied, thanks!
>
> [1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
> commit: b468412409c0e5752ad3396b147cac563ff8dd3b
this one still seems to be sitting in the v5.9/fixes branch
I don't see a reason to rush this, so can you please queue it up for
v5.10/fixes?
Thank you!
Martin
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-09-25 15:28 ` Martin Blumenstingl
0 siblings, 0 replies; 19+ messages in thread
From: Martin Blumenstingl @ 2020-09-25 15:28 UTC (permalink / raw)
To: Kevin Hilman
Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Thomas Graichen
Hi Kevin,
On Mon, Aug 24, 2020 at 11:16 PM Kevin Hilman <khilman@baylibre.com> wrote:
[...]
> Applied, thanks!
>
> [1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
> commit: b468412409c0e5752ad3396b147cac563ff8dd3b
this one still seems to be sitting in the v5.9/fixes branch
I don't see a reason to rush this, so can you please queue it up for
v5.10/fixes?
Thank you!
Martin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-09-25 15:28 ` Martin Blumenstingl
0 siblings, 0 replies; 19+ messages in thread
From: Martin Blumenstingl @ 2020-09-25 15:28 UTC (permalink / raw)
To: Kevin Hilman
Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Thomas Graichen
Hi Kevin,
On Mon, Aug 24, 2020 at 11:16 PM Kevin Hilman <khilman@baylibre.com> wrote:
[...]
> Applied, thanks!
>
> [1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
> commit: b468412409c0e5752ad3396b147cac563ff8dd3b
this one still seems to be sitting in the v5.9/fixes branch
I don't see a reason to rush this, so can you please queue it up for
v5.10/fixes?
Thank you!
Martin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
2020-09-25 15:28 ` Martin Blumenstingl
(?)
@ 2020-10-02 18:29 ` Kevin Hilman
-1 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-10-02 18:29 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, Thomas Graichen
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> Hi Kevin,
>
> On Mon, Aug 24, 2020 at 11:16 PM Kevin Hilman <khilman@baylibre.com> wrote:
> [...]
>> Applied, thanks!
>>
>> [1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
>> commit: b468412409c0e5752ad3396b147cac563ff8dd3b
> this one still seems to be sitting in the v5.9/fixes branch
> I don't see a reason to rush this, so can you please queue it up for
> v5.10/fixes?
Yes, sorry this one slipped through the cracks.
Kevin
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-10-02 18:29 ` Kevin Hilman
0 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-10-02 18:29 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Thomas Graichen
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> Hi Kevin,
>
> On Mon, Aug 24, 2020 at 11:16 PM Kevin Hilman <khilman@baylibre.com> wrote:
> [...]
>> Applied, thanks!
>>
>> [1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
>> commit: b468412409c0e5752ad3396b147cac563ff8dd3b
> this one still seems to be sitting in the v5.9/fixes branch
> I don't see a reason to rush this, so can you please queue it up for
> v5.10/fixes?
Yes, sorry this one slipped through the cracks.
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
@ 2020-10-02 18:29 ` Kevin Hilman
0 siblings, 0 replies; 19+ messages in thread
From: Kevin Hilman @ 2020-10-02 18:29 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Thomas Graichen
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> Hi Kevin,
>
> On Mon, Aug 24, 2020 at 11:16 PM Kevin Hilman <khilman@baylibre.com> wrote:
> [...]
>> Applied, thanks!
>>
>> [1/1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
>> commit: b468412409c0e5752ad3396b147cac563ff8dd3b
> this one still seems to be sitting in the v5.9/fixes branch
> I don't see a reason to rush this, so can you please queue it up for
> v5.10/fixes?
Yes, sorry this one slipped through the cracks.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2020-10-02 18:30 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-15 18:19 [PATCH RESEND v1] ARM: dts: meson8: remove two invalid interrupt lines from the GPU node Martin Blumenstingl
2020-08-15 18:19 ` Martin Blumenstingl
2020-08-15 18:19 ` Martin Blumenstingl
2020-08-23 20:25 ` Thomas Graichen
2020-08-23 20:25 ` Thomas Graichen
2020-08-23 20:25 ` Thomas Graichen
2020-08-24 8:04 ` Neil Armstrong
2020-08-24 20:36 ` Kevin Hilman
2020-08-24 20:36 ` Kevin Hilman
2020-08-24 20:36 ` Kevin Hilman
2020-08-24 21:16 ` Kevin Hilman
2020-08-24 21:16 ` Kevin Hilman
2020-08-24 21:16 ` Kevin Hilman
2020-09-25 15:28 ` Martin Blumenstingl
2020-09-25 15:28 ` Martin Blumenstingl
2020-09-25 15:28 ` Martin Blumenstingl
2020-10-02 18:29 ` Kevin Hilman
2020-10-02 18:29 ` Kevin Hilman
2020-10-02 18:29 ` Kevin Hilman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.