From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [RESEND PATCH v3 2/2] ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC Date: Wed, 06 Dec 2017 12:18:32 -0800 Message-ID: <7htvx3r4o7.fsf@baylibre.com> References: <20171120102354.5354-1-yixun.lan@amlogic.com> <20171120102354.5354-3-yixun.lan@amlogic.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20171120102354.5354-3-yixun.lan@amlogic.com> (Yixun Lan's message of "Mon, 20 Nov 2017 18:23:54 +0800") Sender: linux-kernel-owner@vger.kernel.org To: Yixun Lan Cc: Rob Herring , Mark Rutland , Linus Walleij , Neil Armstrong , Jerome Brunet , Carlo Caione , Xingyu Chen , devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: linux-gpio@vger.kernel.org Yixun Lan writes: > From: Xingyu Chen > > Add new pinctrl DT info for the Amlogic's Meson-AXG SoC. > > Reviewed-by: Neil Armstrong > Signed-off-by: Xingyu Chen > Signed-off-by: Yixun Lan > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 5fc33b76b91c..e0fb860e12c5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -9,6 +9,7 @@ > #include > #include > #include This doesn't apply because this aoclkc.h header does not exist in mainline. Kevin > +#include > > / { > compatible = "amlogic,meson-axg"; > @@ -173,6 +174,32 @@ > #mbox-cells = <1>; > }; > > + periphs: periphs@ff634000 { > + compatible = "simple-bus"; > + reg = <0x0 0xff634000 0x0 0x2000>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; > + > + pinctrl_periphs: pinctrl@480 { > + compatible = "amlogic,meson-axg-periphs-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio: bank@480 { > + reg = <0x0 0x00480 0x0 0x40>, > + <0x0 0x004e8 0x0 0x14>, > + <0x0 0x00520 0x0 0x14>, > + <0x0 0x00430 0x0 0x3c>; > + reg-names = "mux", "pull", "pull-enable", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_periphs 0 0 86>; > + }; > + }; > + }; > + > sram: sram@fffc0000 { > compatible = "amlogic,meson-axg-sram", "mmio-sram"; > reg = <0x0 0xfffc0000 0x0 0x20000>; > @@ -209,6 +236,23 @@ > }; > }; > > + pinctrl_aobus: pinctrl@14 { > + compatible = "amlogic,meson-axg-aobus-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio_ao: bank@14 { > + reg = <0x0 0x00014 0x0 0x8>, > + <0x0 0x0002c 0x0 0x4>, > + <0x0 0x00024 0x0 0x8>; > + reg-names = "mux", "pull", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_aobus 0 0 15>; > + }; > + }; > + > uart_AO: serial@3000 { > compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; > reg = <0x0 0x3000 0x0 0x18>; From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752134AbdLFUSl (ORCPT ); Wed, 6 Dec 2017 15:18:41 -0500 Received: from mail-wr0-f193.google.com ([209.85.128.193]:36101 "EHLO mail-wr0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751500AbdLFUSh (ORCPT ); Wed, 6 Dec 2017 15:18:37 -0500 X-Google-Smtp-Source: AGs4zMa+E+w3tIbE5l3BBC1Mu2UcRlIhMsNHBFlIXDgo8+r13d7GybG96f+P3AUFGTwxGnbfC4pbVQ== From: Kevin Hilman To: Yixun Lan Cc: Rob Herring , Mark Rutland , Linus Walleij , Neil Armstrong , Jerome Brunet , Carlo Caione , Xingyu Chen , , , , , Subject: Re: [RESEND PATCH v3 2/2] ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC Organization: BayLibre References: <20171120102354.5354-1-yixun.lan@amlogic.com> <20171120102354.5354-3-yixun.lan@amlogic.com> Date: Wed, 06 Dec 2017 12:18:32 -0800 In-Reply-To: <20171120102354.5354-3-yixun.lan@amlogic.com> (Yixun Lan's message of "Mon, 20 Nov 2017 18:23:54 +0800") Message-ID: <7htvx3r4o7.fsf@baylibre.com> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/24.5 (gnu/linux) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Yixun Lan writes: > From: Xingyu Chen > > Add new pinctrl DT info for the Amlogic's Meson-AXG SoC. > > Reviewed-by: Neil Armstrong > Signed-off-by: Xingyu Chen > Signed-off-by: Yixun Lan > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 5fc33b76b91c..e0fb860e12c5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -9,6 +9,7 @@ > #include > #include > #include This doesn't apply because this aoclkc.h header does not exist in mainline. Kevin > +#include > > / { > compatible = "amlogic,meson-axg"; > @@ -173,6 +174,32 @@ > #mbox-cells = <1>; > }; > > + periphs: periphs@ff634000 { > + compatible = "simple-bus"; > + reg = <0x0 0xff634000 0x0 0x2000>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; > + > + pinctrl_periphs: pinctrl@480 { > + compatible = "amlogic,meson-axg-periphs-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio: bank@480 { > + reg = <0x0 0x00480 0x0 0x40>, > + <0x0 0x004e8 0x0 0x14>, > + <0x0 0x00520 0x0 0x14>, > + <0x0 0x00430 0x0 0x3c>; > + reg-names = "mux", "pull", "pull-enable", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_periphs 0 0 86>; > + }; > + }; > + }; > + > sram: sram@fffc0000 { > compatible = "amlogic,meson-axg-sram", "mmio-sram"; > reg = <0x0 0xfffc0000 0x0 0x20000>; > @@ -209,6 +236,23 @@ > }; > }; > > + pinctrl_aobus: pinctrl@14 { > + compatible = "amlogic,meson-axg-aobus-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio_ao: bank@14 { > + reg = <0x0 0x00014 0x0 0x8>, > + <0x0 0x0002c 0x0 0x4>, > + <0x0 0x00024 0x0 0x8>; > + reg-names = "mux", "pull", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_aobus 0 0 15>; > + }; > + }; > + > uart_AO: serial@3000 { > compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; > reg = <0x0 0x3000 0x0 0x18>; From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@baylibre.com (Kevin Hilman) Date: Wed, 06 Dec 2017 12:18:32 -0800 Subject: [RESEND PATCH v3 2/2] ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC In-Reply-To: <20171120102354.5354-3-yixun.lan@amlogic.com> (Yixun Lan's message of "Mon, 20 Nov 2017 18:23:54 +0800") References: <20171120102354.5354-1-yixun.lan@amlogic.com> <20171120102354.5354-3-yixun.lan@amlogic.com> Message-ID: <7htvx3r4o7.fsf@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Yixun Lan writes: > From: Xingyu Chen > > Add new pinctrl DT info for the Amlogic's Meson-AXG SoC. > > Reviewed-by: Neil Armstrong > Signed-off-by: Xingyu Chen > Signed-off-by: Yixun Lan > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 5fc33b76b91c..e0fb860e12c5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -9,6 +9,7 @@ > #include > #include > #include This doesn't apply because this aoclkc.h header does not exist in mainline. Kevin > +#include > > / { > compatible = "amlogic,meson-axg"; > @@ -173,6 +174,32 @@ > #mbox-cells = <1>; > }; > > + periphs: periphs at ff634000 { > + compatible = "simple-bus"; > + reg = <0x0 0xff634000 0x0 0x2000>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; > + > + pinctrl_periphs: pinctrl at 480 { > + compatible = "amlogic,meson-axg-periphs-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio: bank at 480 { > + reg = <0x0 0x00480 0x0 0x40>, > + <0x0 0x004e8 0x0 0x14>, > + <0x0 0x00520 0x0 0x14>, > + <0x0 0x00430 0x0 0x3c>; > + reg-names = "mux", "pull", "pull-enable", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_periphs 0 0 86>; > + }; > + }; > + }; > + > sram: sram at fffc0000 { > compatible = "amlogic,meson-axg-sram", "mmio-sram"; > reg = <0x0 0xfffc0000 0x0 0x20000>; > @@ -209,6 +236,23 @@ > }; > }; > > + pinctrl_aobus: pinctrl at 14 { > + compatible = "amlogic,meson-axg-aobus-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio_ao: bank at 14 { > + reg = <0x0 0x00014 0x0 0x8>, > + <0x0 0x0002c 0x0 0x4>, > + <0x0 0x00024 0x0 0x8>; > + reg-names = "mux", "pull", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_aobus 0 0 15>; > + }; > + }; > + > uart_AO: serial at 3000 { > compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; > reg = <0x0 0x3000 0x0 0x18>; From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@baylibre.com (Kevin Hilman) Date: Wed, 06 Dec 2017 12:18:32 -0800 Subject: [RESEND PATCH v3 2/2] ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC In-Reply-To: <20171120102354.5354-3-yixun.lan@amlogic.com> (Yixun Lan's message of "Mon, 20 Nov 2017 18:23:54 +0800") References: <20171120102354.5354-1-yixun.lan@amlogic.com> <20171120102354.5354-3-yixun.lan@amlogic.com> Message-ID: <7htvx3r4o7.fsf@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Yixun Lan writes: > From: Xingyu Chen > > Add new pinctrl DT info for the Amlogic's Meson-AXG SoC. > > Reviewed-by: Neil Armstrong > Signed-off-by: Xingyu Chen > Signed-off-by: Yixun Lan > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 44 ++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 5fc33b76b91c..e0fb860e12c5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -9,6 +9,7 @@ > #include > #include > #include This doesn't apply because this aoclkc.h header does not exist in mainline. Kevin > +#include > > / { > compatible = "amlogic,meson-axg"; > @@ -173,6 +174,32 @@ > #mbox-cells = <1>; > }; > > + periphs: periphs at ff634000 { > + compatible = "simple-bus"; > + reg = <0x0 0xff634000 0x0 0x2000>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; > + > + pinctrl_periphs: pinctrl at 480 { > + compatible = "amlogic,meson-axg-periphs-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio: bank at 480 { > + reg = <0x0 0x00480 0x0 0x40>, > + <0x0 0x004e8 0x0 0x14>, > + <0x0 0x00520 0x0 0x14>, > + <0x0 0x00430 0x0 0x3c>; > + reg-names = "mux", "pull", "pull-enable", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_periphs 0 0 86>; > + }; > + }; > + }; > + > sram: sram at fffc0000 { > compatible = "amlogic,meson-axg-sram", "mmio-sram"; > reg = <0x0 0xfffc0000 0x0 0x20000>; > @@ -209,6 +236,23 @@ > }; > }; > > + pinctrl_aobus: pinctrl at 14 { > + compatible = "amlogic,meson-axg-aobus-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio_ao: bank at 14 { > + reg = <0x0 0x00014 0x0 0x8>, > + <0x0 0x0002c 0x0 0x4>, > + <0x0 0x00024 0x0 0x8>; > + reg-names = "mux", "pull", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pinctrl_aobus 0 0 15>; > + }; > + }; > + > uart_AO: serial at 3000 { > compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; > reg = <0x0 0x3000 0x0 0x18>;