From: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
To: Linux Kernel Network Developers <netdev@vger.kernel.org>
Subject: finally found nasty use-after-free bug? 4.10.8
Date: Sun, 02 Apr 2017 10:26:10 +0300 [thread overview]
Message-ID: <836f0b78d11b9260ac16804344c29004@nuclearcat.com> (raw)
I am searching reasons of crashes for multiple NAT servers, and tried to
enable KASAN.
It seems i got something, and it looks very possible related to all
crashes, because on all that servers i have MSS.
[25181.855611]
==================================================================
[25181.855985] BUG: KASAN: use-after-free in tcpmss_tg4+0x682/0xe9c
[xt_TCPMSS] at addr ffff8802976000ea
[25181.856344] Read of size 1 by task swapper/1/0
[25181.856555] page:ffffea000a5d8000 count:0 mapcount:0 mapping:
(null) index:0x0
[25181.856909] flags: 0x1000000000000000()
[25181.857123] raw: 1000000000000000 0000000000000000 0000000000000000
00000000ffffffff
[25181.857630] raw: ffffea000b0444a0 ffffea000a0b1f60 0000000000000000
0000000000000000
[25181.857996] page dumped because: kasan: bad access detected
[25181.858214] CPU: 1 PID: 0 Comm: swapper/1 Not tainted
4.10.8-build-0133-debug #3
[25181.858571] Hardware name: HP ProLiant DL320e Gen8 v2, BIOS P80
04/02/2015
[25181.858786] Call Trace:
[25181.859000] <IRQ>
[25181.859215] dump_stack+0x99/0xd4
[25181.859423] ? _atomic_dec_and_lock+0x15d/0x15d
[25181.859644] ? __dump_page+0x447/0x4e3
[25181.859859] ? tcpmss_tg4+0x682/0xe9c [xt_TCPMSS]
[25181.860080] kasan_report+0x577/0x69d
[25181.860291] ? __ip_route_output_key_hash+0x14ce/0x1503
[25181.860512] ? tcpmss_tg4+0x682/0xe9c [xt_TCPMSS]
[25181.860736] __asan_report_load1_noabort+0x19/0x1b
[25181.860956] tcpmss_tg4+0x682/0xe9c [xt_TCPMSS]
[25181.861180] ? tcpmss_tg4_check+0x287/0x287 [xt_TCPMSS]
[25181.861407] ? udp_mt+0x45a/0x45a [xt_tcpudp]
[25181.861634] ? __fib_validate_source+0x46b/0xcd1
[25181.861860] ipt_do_table+0x1432/0x1573 [ip_tables]
[25181.862088] ? igb_msix_ring+0x2d/0x35
[25181.862318] ? ip_tables_net_init+0x15/0x15 [ip_tables]
[25181.862537] ? ip_route_input_slow+0xe9f/0x17e3
[25181.862759] ? handle_irq_event_percpu+0x141/0x141
[25181.862985] ? rt_set_nexthop+0x9a7/0x9a7
[25181.863203] ? ip_tables_net_exit+0xe/0x15 [ip_tables]
[25181.863419] ? tcf_action_exec+0xce/0x18c
[25181.863628] ? iptable_mangle_net_exit+0x92/0x92 [iptable_mangle]
[25181.863856] ? iptable_filter_net_exit+0x92/0x92 [iptable_filter]
[25181.864084] iptable_filter_hook+0xc0/0x1c8 [iptable_filter]
[25181.864311] nf_hook_slow+0x7d/0x121
[25181.864536] ip_forward+0x1183/0x11c6
[25181.864752] ? ip_forward_finish+0x168/0x168
[25181.864967] ? ip_frag_mem+0x43/0x43
[25181.865194] ? iptable_nat_net_exit+0x92/0x92 [iptable_nat]
[25181.865423] ? nf_nat_ipv4_in+0xf0/0x209 [nf_nat_ipv4]
[25181.865648] ip_rcv_finish+0xf4c/0xf5b
[25181.865861] ip_rcv+0xb41/0xb72
[25181.866086] ? ip_local_deliver+0x282/0x282
[25181.866308] ? ip_local_deliver_finish+0x6e6/0x6e6
[25181.866524] ? ip_local_deliver+0x282/0x282
[25181.866752] __netif_receive_skb_core+0x1b27/0x21bf
[25181.866971] ? netdev_rx_handler_register+0x1a6/0x1a6
[25181.867186] ? enqueue_hrtimer+0x232/0x240
[25181.867401] ? hrtimer_start_range_ns+0xd1c/0xd4b
[25181.867630] ? __ppp_xmit_process+0x101f/0x104e [ppp_generic]
[25181.867852] ? hrtimer_cancel+0x20/0x20
[25181.868081] ? ppp_push+0x1402/0x1402 [ppp_generic]
[25181.868301] ? __pskb_pull_tail+0xb0f/0xb25
[25181.868523] ? ppp_xmit_process+0x47/0xaf [ppp_generic]
[25181.868749] __netif_receive_skb+0x5e/0x191
[25181.868968] process_backlog+0x295/0x573
[25181.869180] ? __netif_receive_skb+0x191/0x191
[25181.869401] napi_poll+0x311/0x745
[25181.869611] ? napi_complete_done+0x3b4/0x3b4
[25181.869836] ? __qdisc_run+0x4ec/0xb7f
[25181.870061] ? sch_direct_xmit+0x60b/0x60b
[25181.870286] net_rx_action+0x2e8/0x6dc
[25181.870512] ? napi_poll+0x745/0x745
[25181.870732] ? rps_trigger_softirq+0x181/0x1e4
[25181.870956] ? rps_may_expire_flow+0x29b/0x29b
[25181.871184] ? irq_work_run+0x2c/0x2e
[25181.871411] __do_softirq+0x22b/0x5df
[25181.871629] ? smp_call_function_single_async+0x17d/0x17d
[25181.871854] irq_exit+0x8a/0xfe
[25181.872069] smp_call_function_single_interrupt+0x8d/0x90
[25181.872297] call_function_single_interrupt+0x83/0x90
[25181.872519] RIP: 0010:mwait_idle+0x15a/0x30d
[25181.872733] RSP: 0018:ffff8802d1017e78 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffff04
[25181.873091] RAX: 0000000000000000 RBX: ffff8802d1000c80 RCX:
0000000000000000
[25181.873311] RDX: 1ffff1005a200190 RSI: 0000000000000000 RDI:
0000000000000000
[25181.873532] RBP: ffff8802d1017e98 R08: 000000000000003f R09:
00007f75f7fff700
[25181.873751] R10: ffff8802d1017d80 R11: ffff8802c9b00000 R12:
0000000000000001
[25181.873971] R13: 0000000000000000 R14: ffff8802d1000c80 R15:
dffffc0000000000
[25181.874182] </IRQ>
[25181.874393] arch_cpu_idle+0xf/0x11
[25181.874602] default_idle_call+0x59/0x5c
[25181.874818] do_idle+0x11c/0x217
[25181.875039] cpu_startup_entry+0x1f/0x21
[25181.875258] start_secondary+0x2cc/0x2d5
[25181.875481] start_cpu+0x14/0x14
[25181.875696] Memory state around the buggy address:
[25181.875919] ffff8802975fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[25181.876275] ffff880297600000: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[25181.876628] >ffff880297600080: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[25181.876984]
^
[25181.877203] ffff880297600100: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[25181.877569] ffff880297600180: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[25181.877930]
==================================================================
[25181.878283] Disabling lock debugging due to kernel taint
[25181.878584]
==================================================================
reply other threads:[~2017-04-02 7:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=836f0b78d11b9260ac16804344c29004@nuclearcat.com \
--to=nuclearcat@nuclearcat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.