From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: nbd@nbd.name
Cc: linux-wireless@vger.kernel.org, sgruszka@redhat.com
Subject: [RFC 15/18] mt76: add mt76x2_phy_common to mt76x2-common module
Date: Mon, 30 Apr 2018 16:12:30 +0200 [thread overview]
Message-ID: <84a35439471bc335b6dac7d8bae3caa4c611fe23.1525096206.git.lorenzo.bianconi@redhat.com> (raw)
In-Reply-To: <cover.1525096206.git.lorenzo.bianconi@redhat.com>
Move phy related code shared between mt76x2 and mt76x2u in
mt76x2-common module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
---
drivers/net/wireless/mediatek/mt76/Makefile | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x2.h | 8 +
drivers/net/wireless/mediatek/mt76/mt76x2_phy.c | 281 -------------------
.../net/wireless/mediatek/mt76/mt76x2_phy_common.c | 302 +++++++++++++++++++++
4 files changed, 311 insertions(+), 282 deletions(-)
create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2_phy_common.c
diff --git a/drivers/net/wireless/mediatek/mt76/Makefile b/drivers/net/wireless/mediatek/mt76/Makefile
index a184e16a5d54..5a9f34b14ee4 100644
--- a/drivers/net/wireless/mediatek/mt76/Makefile
+++ b/drivers/net/wireless/mediatek/mt76/Makefile
@@ -9,7 +9,7 @@ CFLAGS_trace.o := -I$(src)
mt76x2-common-y := \
mt76x2_eeprom.o mt76x2_tx_common.o mt76x2_mac_common.o \
- mt76x2_init_common.o mt76x2_common.o
+ mt76x2_init_common.o mt76x2_common.o mt76x2_phy_common.o
mt76x2e-y := \
mt76x2_pci.o mt76x2_dma.o \
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2.h b/drivers/net/wireless/mediatek/mt76/mt76x2.h
index 12d95bdc0d18..4436b2639a4a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2.h
@@ -301,4 +301,12 @@ void mt76x2_sta_rate_tbl_update(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
+void mt76x2_phy_set_txpower_regs(struct mt76x2_dev *dev,
+ enum nl80211_band band);
+void mt76x2_configure_tx_delay(struct mt76x2_dev *dev,
+ enum nl80211_band band, u8 bw);
+void mt76x2_phy_set_bw(struct mt76x2_dev *dev, int width, u8 ctrl);
+void mt76x2_phy_set_band(struct mt76x2_dev *dev, int band, bool primary_upper);
+void mt76x2_apply_gain_adj(struct mt76x2_dev *dev);
+
#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
index 0ce40887b19f..e3060642d7ec 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_phy.c
@@ -19,50 +19,6 @@
#include "mt76x2_mcu.h"
#include "mt76x2_eeprom.h"
-static void
-mt76x2_adjust_high_lna_gain(struct mt76x2_dev *dev, int reg, s8 offset)
-{
- s8 gain;
-
- gain = FIELD_GET(MT_BBP_AGC_LNA_HIGH_GAIN, mt76_rr(dev, MT_BBP(AGC, reg)));
- gain -= offset / 2;
- mt76_rmw_field(dev, MT_BBP(AGC, reg), MT_BBP_AGC_LNA_HIGH_GAIN, gain);
-}
-
-static void
-mt76x2_adjust_agc_gain(struct mt76x2_dev *dev, int reg, s8 offset)
-{
- s8 gain;
-
- gain = FIELD_GET(MT_BBP_AGC_GAIN, mt76_rr(dev, MT_BBP(AGC, reg)));
- gain += offset;
- mt76_rmw_field(dev, MT_BBP(AGC, reg), MT_BBP_AGC_GAIN, gain);
-}
-
-static void
-mt76x2_apply_gain_adj(struct mt76x2_dev *dev)
-{
- s8 *gain_adj = dev->cal.rx.high_gain;
-
- mt76x2_adjust_high_lna_gain(dev, 4, gain_adj[0]);
- mt76x2_adjust_high_lna_gain(dev, 5, gain_adj[1]);
-
- mt76x2_adjust_agc_gain(dev, 8, gain_adj[0]);
- mt76x2_adjust_agc_gain(dev, 9, gain_adj[1]);
-}
-
-static u32
-mt76x2_tx_power_mask(u8 v1, u8 v2, u8 v3, u8 v4)
-{
- u32 val = 0;
-
- val |= (v1 & (BIT(6) - 1)) << 0;
- val |= (v2 & (BIT(6) - 1)) << 8;
- val |= (v3 & (BIT(6) - 1)) << 16;
- val |= (v4 & (BIT(6) - 1)) << 24;
- return val;
-}
-
int mt76x2_phy_get_rssi(struct mt76x2_dev *dev, s8 rssi, int chain)
{
struct mt76x2_rx_freq_cal *cal = &dev->cal.rx;
@@ -73,109 +29,6 @@ int mt76x2_phy_get_rssi(struct mt76x2_dev *dev, s8 rssi, int chain)
return rssi;
}
-static void
-mt76x2_add_rate_power_offset(struct mt76_rate_power *r, int offset)
-{
- int i;
-
- for (i = 0; i < sizeof(r->all); i++)
- r->all[i] += offset;
-}
-
-static void
-mt76x2_limit_rate_power(struct mt76_rate_power *r, int limit)
-{
- int i;
-
- for (i = 0; i < sizeof(r->all); i++)
- if (r->all[i] > limit)
- r->all[i] = limit;
-}
-
-static int
-mt76x2_get_min_rate_power(struct mt76_rate_power *r)
-{
- int i;
- s8 ret = 0;
-
- for (i = 0; i < sizeof(r->all); i++) {
- if (!r->all[i])
- continue;
-
- if (ret)
- ret = min(ret, r->all[i]);
- else
- ret = r->all[i];
- }
-
- return ret;
-}
-
-
-void mt76x2_phy_set_txpower(struct mt76x2_dev *dev)
-{
- enum nl80211_chan_width width = dev->mt76.chandef.width;
- struct ieee80211_channel *chan = dev->mt76.chandef.chan;
- struct mt76x2_tx_power_info txp;
- int txp_0, txp_1, delta = 0;
- struct mt76_rate_power t = {};
- int base_power, gain;
-
- mt76x2_get_power_info(dev, &txp, chan);
-
- if (width == NL80211_CHAN_WIDTH_40)
- delta = txp.delta_bw40;
- else if (width == NL80211_CHAN_WIDTH_80)
- delta = txp.delta_bw80;
-
- mt76x2_get_rate_power(dev, &t, chan);
- mt76x2_add_rate_power_offset(&t, txp.chain[0].target_power);
- mt76x2_limit_rate_power(&t, dev->txpower_conf);
- dev->txpower_cur = mt76x2_get_max_rate_power(&t);
-
- base_power = mt76x2_get_min_rate_power(&t);
- delta += base_power - txp.chain[0].target_power;
- txp_0 = txp.chain[0].target_power + txp.chain[0].delta + delta;
- txp_1 = txp.chain[1].target_power + txp.chain[1].delta + delta;
-
- gain = min(txp_0, txp_1);
- if (gain < 0) {
- base_power -= gain;
- txp_0 -= gain;
- txp_1 -= gain;
- } else if (gain > 0x2f) {
- base_power -= gain - 0x2f;
- txp_0 = 0x2f;
- txp_1 = 0x2f;
- }
-
- mt76x2_add_rate_power_offset(&t, -base_power);
- dev->target_power = txp.chain[0].target_power;
- dev->target_power_delta[0] = txp_0 - txp.chain[0].target_power;
- dev->target_power_delta[1] = txp_1 - txp.chain[0].target_power;
- dev->rate_power = t;
-
- mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_0, txp_0);
- mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_1, txp_1);
-
- mt76_wr(dev, MT_TX_PWR_CFG_0,
- mt76x2_tx_power_mask(t.cck[0], t.cck[2], t.ofdm[0], t.ofdm[2]));
- mt76_wr(dev, MT_TX_PWR_CFG_1,
- mt76x2_tx_power_mask(t.ofdm[4], t.ofdm[6], t.ht[0], t.ht[2]));
- mt76_wr(dev, MT_TX_PWR_CFG_2,
- mt76x2_tx_power_mask(t.ht[4], t.ht[6], t.ht[8], t.ht[10]));
- mt76_wr(dev, MT_TX_PWR_CFG_3,
- mt76x2_tx_power_mask(t.ht[12], t.ht[14], t.ht[0], t.ht[2]));
- mt76_wr(dev, MT_TX_PWR_CFG_4,
- mt76x2_tx_power_mask(t.ht[4], t.ht[6], 0, 0));
- mt76_wr(dev, MT_TX_PWR_CFG_7,
- mt76x2_tx_power_mask(t.ofdm[6], t.vht[8], t.ht[6], t.vht[8]));
- mt76_wr(dev, MT_TX_PWR_CFG_8,
- mt76x2_tx_power_mask(t.ht[14], t.vht[8], t.vht[8], 0));
- mt76_wr(dev, MT_TX_PWR_CFG_9,
- mt76x2_tx_power_mask(t.ht[6], t.vht[8], t.vht[8], 0));
-}
-
static bool
mt76x2_phy_tssi_init_cal(struct mt76x2_dev *dev)
{
@@ -234,140 +87,6 @@ mt76x2_phy_channel_calibrate(struct mt76x2_dev *dev, bool mac_stopped)
dev->cal.channel_cal_done = true;
}
-static void
-mt76x2_phy_set_txpower_regs(struct mt76x2_dev *dev, enum nl80211_band band)
-{
- u32 pa_mode[2];
- u32 pa_mode_adj;
-
- if (band == NL80211_BAND_2GHZ) {
- pa_mode[0] = 0x010055ff;
- pa_mode[1] = 0x00550055;
-
- mt76_wr(dev, MT_TX_ALC_CFG_2, 0x35160a00);
- mt76_wr(dev, MT_TX_ALC_CFG_3, 0x35160a06);
-
- if (mt76x2_ext_pa_enabled(dev, band)) {
- mt76_wr(dev, MT_RF_PA_MODE_ADJ0, 0x0000ec00);
- mt76_wr(dev, MT_RF_PA_MODE_ADJ1, 0x0000ec00);
- } else {
- mt76_wr(dev, MT_RF_PA_MODE_ADJ0, 0xf4000200);
- mt76_wr(dev, MT_RF_PA_MODE_ADJ1, 0xfa000200);
- }
- } else {
- pa_mode[0] = 0x0000ffff;
- pa_mode[1] = 0x00ff00ff;
-
- if (mt76x2_ext_pa_enabled(dev, band)) {
- mt76_wr(dev, MT_TX_ALC_CFG_2, 0x2f0f0400);
- mt76_wr(dev, MT_TX_ALC_CFG_3, 0x2f0f0476);
- } else {
- mt76_wr(dev, MT_TX_ALC_CFG_2, 0x1b0f0400);
- mt76_wr(dev, MT_TX_ALC_CFG_3, 0x1b0f0476);
- }
-
- if (mt76x2_ext_pa_enabled(dev, band))
- pa_mode_adj = 0x04000000;
- else
- pa_mode_adj = 0;
-
- mt76_wr(dev, MT_RF_PA_MODE_ADJ0, pa_mode_adj);
- mt76_wr(dev, MT_RF_PA_MODE_ADJ1, pa_mode_adj);
- }
-
- mt76_wr(dev, MT_BB_PA_MODE_CFG0, pa_mode[0]);
- mt76_wr(dev, MT_BB_PA_MODE_CFG1, pa_mode[1]);
- mt76_wr(dev, MT_RF_PA_MODE_CFG0, pa_mode[0]);
- mt76_wr(dev, MT_RF_PA_MODE_CFG1, pa_mode[1]);
-
- if (mt76x2_ext_pa_enabled(dev, band)) {
- u32 val;
-
- if (band == NL80211_BAND_2GHZ)
- val = 0x3c3c023c;
- else
- val = 0x363c023c;
-
- mt76_wr(dev, MT_TX0_RF_GAIN_CORR, val);
- mt76_wr(dev, MT_TX1_RF_GAIN_CORR, val);
- mt76_wr(dev, MT_TX_ALC_CFG_4, 0x00001818);
- } else {
- if (band == NL80211_BAND_2GHZ) {
- u32 val = 0x0f3c3c3c;
-
- mt76_wr(dev, MT_TX0_RF_GAIN_CORR, val);
- mt76_wr(dev, MT_TX1_RF_GAIN_CORR, val);
- mt76_wr(dev, MT_TX_ALC_CFG_4, 0x00000606);
- } else {
- mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x383c023c);
- mt76_wr(dev, MT_TX1_RF_GAIN_CORR, 0x24282e28);
- mt76_wr(dev, MT_TX_ALC_CFG_4, 0);
- }
- }
-}
-
-static void
-mt76x2_configure_tx_delay(struct mt76x2_dev *dev, enum nl80211_band band, u8 bw)
-{
- u32 cfg0, cfg1;
-
- if (mt76x2_ext_pa_enabled(dev, band)) {
- cfg0 = bw ? 0x000b0c01 : 0x00101101;
- cfg1 = 0x00011414;
- } else {
- cfg0 = bw ? 0x000b0b01 : 0x00101001;
- cfg1 = 0x00021414;
- }
- mt76_wr(dev, MT_TX_SW_CFG0, cfg0);
- mt76_wr(dev, MT_TX_SW_CFG1, cfg1);
-
- mt76_rmw_field(dev, MT_XIFS_TIME_CFG, MT_XIFS_TIME_CFG_OFDM_SIFS, 15);
-}
-
-static void
-mt76x2_phy_set_bw(struct mt76x2_dev *dev, int width, u8 ctrl)
-{
- int core_val, agc_val;
-
- switch (width) {
- case NL80211_CHAN_WIDTH_80:
- core_val = 3;
- agc_val = 7;
- break;
- case NL80211_CHAN_WIDTH_40:
- core_val = 2;
- agc_val = 3;
- break;
- default:
- core_val = 0;
- agc_val = 1;
- break;
- }
-
- mt76_rmw_field(dev, MT_BBP(CORE, 1), MT_BBP_CORE_R1_BW, core_val);
- mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_BW, agc_val);
- mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_CTRL_CHAN, ctrl);
- mt76_rmw_field(dev, MT_BBP(TXBE, 0), MT_BBP_TXBE_R0_CTRL_CHAN, ctrl);
-}
-
-static void
-mt76x2_phy_set_band(struct mt76x2_dev *dev, int band, bool primary_upper)
-{
- switch (band) {
- case NL80211_BAND_2GHZ:
- mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
- mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
- break;
- case NL80211_BAND_5GHZ:
- mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
- mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
- break;
- }
-
- mt76_rmw_field(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_UPPER_40M,
- primary_upper);
-}
-
void mt76x2_phy_set_antenna(struct mt76x2_dev *dev)
{
u32 val;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_phy_common.c b/drivers/net/wireless/mediatek/mt76/mt76x2_phy_common.c
new file mode 100644
index 000000000000..3d2c81110832
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_phy_common.c
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2016 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mt76x2.h"
+#include "mt76x2_eeprom.h"
+
+static void
+mt76x2_adjust_high_lna_gain(struct mt76x2_dev *dev, int reg, s8 offset)
+{
+ s8 gain;
+
+ gain = FIELD_GET(MT_BBP_AGC_LNA_HIGH_GAIN, mt76_rr(dev, MT_BBP(AGC, reg)));
+ gain -= offset / 2;
+ mt76_rmw_field(dev, MT_BBP(AGC, reg), MT_BBP_AGC_LNA_HIGH_GAIN, gain);
+}
+
+static void
+mt76x2_adjust_agc_gain(struct mt76x2_dev *dev, int reg, s8 offset)
+{
+ s8 gain;
+
+ gain = FIELD_GET(MT_BBP_AGC_GAIN, mt76_rr(dev, MT_BBP(AGC, reg)));
+ gain += offset;
+ mt76_rmw_field(dev, MT_BBP(AGC, reg), MT_BBP_AGC_GAIN, gain);
+}
+
+void mt76x2_apply_gain_adj(struct mt76x2_dev *dev)
+{
+ s8 *gain_adj = dev->cal.rx.high_gain;
+
+ mt76x2_adjust_high_lna_gain(dev, 4, gain_adj[0]);
+ mt76x2_adjust_high_lna_gain(dev, 5, gain_adj[1]);
+
+ mt76x2_adjust_agc_gain(dev, 8, gain_adj[0]);
+ mt76x2_adjust_agc_gain(dev, 9, gain_adj[1]);
+}
+EXPORT_SYMBOL_GPL(mt76x2_apply_gain_adj);
+
+void mt76x2_phy_set_txpower_regs(struct mt76x2_dev *dev,
+ enum nl80211_band band)
+{
+ u32 pa_mode[2];
+ u32 pa_mode_adj;
+
+ if (band == NL80211_BAND_2GHZ) {
+ pa_mode[0] = 0x010055ff;
+ pa_mode[1] = 0x00550055;
+
+ mt76_wr(dev, MT_TX_ALC_CFG_2, 0x35160a00);
+ mt76_wr(dev, MT_TX_ALC_CFG_3, 0x35160a06);
+
+ if (mt76x2_ext_pa_enabled(dev, band)) {
+ mt76_wr(dev, MT_RF_PA_MODE_ADJ0, 0x0000ec00);
+ mt76_wr(dev, MT_RF_PA_MODE_ADJ1, 0x0000ec00);
+ } else {
+ mt76_wr(dev, MT_RF_PA_MODE_ADJ0, 0xf4000200);
+ mt76_wr(dev, MT_RF_PA_MODE_ADJ1, 0xfa000200);
+ }
+ } else {
+ pa_mode[0] = 0x0000ffff;
+ pa_mode[1] = 0x00ff00ff;
+
+ if (mt76x2_ext_pa_enabled(dev, band)) {
+ mt76_wr(dev, MT_TX_ALC_CFG_2, 0x2f0f0400);
+ mt76_wr(dev, MT_TX_ALC_CFG_3, 0x2f0f0476);
+ } else {
+ mt76_wr(dev, MT_TX_ALC_CFG_2, 0x1b0f0400);
+ mt76_wr(dev, MT_TX_ALC_CFG_3, 0x1b0f0476);
+ }
+
+ if (mt76x2_ext_pa_enabled(dev, band))
+ pa_mode_adj = 0x04000000;
+ else
+ pa_mode_adj = 0;
+
+ mt76_wr(dev, MT_RF_PA_MODE_ADJ0, pa_mode_adj);
+ mt76_wr(dev, MT_RF_PA_MODE_ADJ1, pa_mode_adj);
+ }
+
+ mt76_wr(dev, MT_BB_PA_MODE_CFG0, pa_mode[0]);
+ mt76_wr(dev, MT_BB_PA_MODE_CFG1, pa_mode[1]);
+ mt76_wr(dev, MT_RF_PA_MODE_CFG0, pa_mode[0]);
+ mt76_wr(dev, MT_RF_PA_MODE_CFG1, pa_mode[1]);
+
+ if (mt76x2_ext_pa_enabled(dev, band)) {
+ u32 val;
+
+ if (band == NL80211_BAND_2GHZ)
+ val = 0x3c3c023c;
+ else
+ val = 0x363c023c;
+
+ mt76_wr(dev, MT_TX0_RF_GAIN_CORR, val);
+ mt76_wr(dev, MT_TX1_RF_GAIN_CORR, val);
+ mt76_wr(dev, MT_TX_ALC_CFG_4, 0x00001818);
+ } else {
+ if (band == NL80211_BAND_2GHZ) {
+ u32 val = 0x0f3c3c3c;
+
+ mt76_wr(dev, MT_TX0_RF_GAIN_CORR, val);
+ mt76_wr(dev, MT_TX1_RF_GAIN_CORR, val);
+ mt76_wr(dev, MT_TX_ALC_CFG_4, 0x00000606);
+ } else {
+ mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x383c023c);
+ mt76_wr(dev, MT_TX1_RF_GAIN_CORR, 0x24282e28);
+ mt76_wr(dev, MT_TX_ALC_CFG_4, 0);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(mt76x2_phy_set_txpower_regs);
+
+static void
+mt76x2_limit_rate_power(struct mt76_rate_power *r, int limit)
+{
+ int i;
+
+ for (i = 0; i < sizeof(r->all); i++)
+ if (r->all[i] > limit)
+ r->all[i] = limit;
+}
+
+static u32
+mt76x2_tx_power_mask(u8 v1, u8 v2, u8 v3, u8 v4)
+{
+ u32 val = 0;
+
+ val |= (v1 & (BIT(6) - 1)) << 0;
+ val |= (v2 & (BIT(6) - 1)) << 8;
+ val |= (v3 & (BIT(6) - 1)) << 16;
+ val |= (v4 & (BIT(6) - 1)) << 24;
+ return val;
+}
+
+static void
+mt76x2_add_rate_power_offset(struct mt76_rate_power *r, int offset)
+{
+ int i;
+
+ for (i = 0; i < sizeof(r->all); i++)
+ r->all[i] += offset;
+}
+
+static int
+mt76x2_get_min_rate_power(struct mt76_rate_power *r)
+{
+ int i;
+ s8 ret = 0;
+
+ for (i = 0; i < sizeof(r->all); i++) {
+ if (!r->all[i])
+ continue;
+
+ if (ret)
+ ret = min(ret, r->all[i]);
+ else
+ ret = r->all[i];
+ }
+
+ return ret;
+}
+
+void mt76x2_phy_set_txpower(struct mt76x2_dev *dev)
+{
+ enum nl80211_chan_width width = dev->mt76.chandef.width;
+ struct ieee80211_channel *chan = dev->mt76.chandef.chan;
+ struct mt76x2_tx_power_info txp;
+ int txp_0, txp_1, delta = 0;
+ struct mt76_rate_power t = {};
+ int base_power, gain;
+
+ mt76x2_get_power_info(dev, &txp, chan);
+
+ if (width == NL80211_CHAN_WIDTH_40)
+ delta = txp.delta_bw40;
+ else if (width == NL80211_CHAN_WIDTH_80)
+ delta = txp.delta_bw80;
+
+ mt76x2_get_rate_power(dev, &t, chan);
+ mt76x2_add_rate_power_offset(&t, txp.chain[0].target_power);
+ mt76x2_limit_rate_power(&t, dev->txpower_conf);
+ dev->txpower_cur = mt76x2_get_max_rate_power(&t);
+
+ base_power = mt76x2_get_min_rate_power(&t);
+ delta += base_power - txp.chain[0].target_power;
+ txp_0 = txp.chain[0].target_power + txp.chain[0].delta + delta;
+ txp_1 = txp.chain[1].target_power + txp.chain[1].delta + delta;
+
+ gain = min(txp_0, txp_1);
+ if (gain < 0) {
+ base_power -= gain;
+ txp_0 -= gain;
+ txp_1 -= gain;
+ } else if (gain > 0x2f) {
+ base_power -= gain - 0x2f;
+ txp_0 = 0x2f;
+ txp_1 = 0x2f;
+ }
+
+ mt76x2_add_rate_power_offset(&t, -base_power);
+ dev->target_power = txp.chain[0].target_power;
+ dev->target_power_delta[0] = txp_0 - txp.chain[0].target_power;
+ dev->target_power_delta[1] = txp_1 - txp.chain[0].target_power;
+ dev->rate_power = t;
+
+ mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_0, txp_0);
+ mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_1, txp_1);
+
+ mt76_wr(dev, MT_TX_PWR_CFG_0,
+ mt76x2_tx_power_mask(t.cck[0], t.cck[2], t.ofdm[0], t.ofdm[2]));
+ mt76_wr(dev, MT_TX_PWR_CFG_1,
+ mt76x2_tx_power_mask(t.ofdm[4], t.ofdm[6], t.ht[0], t.ht[2]));
+ mt76_wr(dev, MT_TX_PWR_CFG_2,
+ mt76x2_tx_power_mask(t.ht[4], t.ht[6], t.ht[8], t.ht[10]));
+ mt76_wr(dev, MT_TX_PWR_CFG_3,
+ mt76x2_tx_power_mask(t.ht[12], t.ht[14], t.ht[0], t.ht[2]));
+ mt76_wr(dev, MT_TX_PWR_CFG_4,
+ mt76x2_tx_power_mask(t.ht[4], t.ht[6], 0, 0));
+ mt76_wr(dev, MT_TX_PWR_CFG_7,
+ mt76x2_tx_power_mask(t.ofdm[6], t.vht[8], t.ht[6], t.vht[8]));
+ mt76_wr(dev, MT_TX_PWR_CFG_8,
+ mt76x2_tx_power_mask(t.ht[14], t.vht[8], t.vht[8], 0));
+ mt76_wr(dev, MT_TX_PWR_CFG_9,
+ mt76x2_tx_power_mask(t.ht[6], t.vht[8], t.vht[8], 0));
+}
+EXPORT_SYMBOL_GPL(mt76x2_phy_set_txpower);
+
+void mt76x2_configure_tx_delay(struct mt76x2_dev *dev,
+ enum nl80211_band band, u8 bw)
+{
+ u32 cfg0, cfg1;
+
+ if (mt76x2_ext_pa_enabled(dev, band)) {
+ cfg0 = bw ? 0x000b0c01 : 0x00101101;
+ cfg1 = 0x00011414;
+ } else {
+ cfg0 = bw ? 0x000b0b01 : 0x00101001;
+ cfg1 = 0x00021414;
+ }
+ mt76_wr(dev, MT_TX_SW_CFG0, cfg0);
+ mt76_wr(dev, MT_TX_SW_CFG1, cfg1);
+
+ mt76_rmw_field(dev, MT_XIFS_TIME_CFG, MT_XIFS_TIME_CFG_OFDM_SIFS, 15);
+}
+EXPORT_SYMBOL_GPL(mt76x2_configure_tx_delay);
+
+void mt76x2_phy_set_bw(struct mt76x2_dev *dev, int width, u8 ctrl)
+{
+ int core_val, agc_val;
+
+ switch (width) {
+ case NL80211_CHAN_WIDTH_80:
+ core_val = 3;
+ agc_val = 7;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ core_val = 2;
+ agc_val = 3;
+ break;
+ default:
+ core_val = 0;
+ agc_val = 1;
+ break;
+ }
+
+ mt76_rmw_field(dev, MT_BBP(CORE, 1), MT_BBP_CORE_R1_BW, core_val);
+ mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_BW, agc_val);
+ mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_CTRL_CHAN, ctrl);
+ mt76_rmw_field(dev, MT_BBP(TXBE, 0), MT_BBP_TXBE_R0_CTRL_CHAN, ctrl);
+}
+EXPORT_SYMBOL_GPL(mt76x2_phy_set_bw);
+
+void mt76x2_phy_set_band(struct mt76x2_dev *dev, int band, bool primary_upper)
+{
+ switch (band) {
+ case NL80211_BAND_2GHZ:
+ mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
+ mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
+ break;
+ case NL80211_BAND_5GHZ:
+ mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
+ mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
+ break;
+ }
+
+ mt76_rmw_field(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_UPPER_40M,
+ primary_upper);
+}
+EXPORT_SYMBOL_GPL(mt76x2_phy_set_band);
--
2.14.3
next prev parent reply other threads:[~2018-04-30 14:13 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-30 14:12 [RFC 00/18] add mt76x2u support to mt76 driver Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 01/18] mt76x2: use completion instead of wait_queue for mcu rx queue Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 02/18] mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 03/18] mt76x2: move utility routines in mt76x2.h Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 04/18] mt76x2: introduce mt76x2_init_device routine Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 05/18] mt76x2: move currently mt76x2u unsupported features to mt76x2_init Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 06/18] mt76x2: introduce mt76x2_mac_load_tx_status routine Lorenzo Bianconi
2018-05-02 13:07 ` Stanislaw Gruszka
2018-05-02 13:34 ` Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 07/18] mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 08/18] mt76x2: add buffer len to mt76x2_mac_write_txwi signature Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 09/18] mt76: introduce tx_queue_skb function pointer in mt76_bus_ops Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 10/18] mt76: introduce mt76x2-common module Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 11/18] mt76: add mt76x2_tx_common to " Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 12/18] mt76: add mt76x2_mac_common " Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 13/18] mt76: add mt76x2_init_common " Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 14/18] mt76: add mt76x2_common " Lorenzo Bianconi
2018-04-30 14:12 ` Lorenzo Bianconi [this message]
2018-04-30 14:12 ` [RFC 16/18] mt76: move mt76x2_debugfs in mt76-common module Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 17/18] mt76: add usb suppor to mt76 layer Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 18/18] mt76: add driver code for MT76x2u based devices Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=84a35439471bc335b6dac7d8bae3caa4c611fe23.1525096206.git.lorenzo.bianconi@redhat.com \
--to=lorenzo.bianconi@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=sgruszka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.