From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kuninori Morimoto Date: Tue, 20 Sep 2011 02:08:18 +0000 Subject: Re: Ecovec (SH7724) board doesn't work on latest linus tree Message-Id: <871uvcney9.wl%kuninori.morimoto.gx@renesas.com> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Hi Paul, Iwamatsu-san > On Thu, Sep 08, 2011 at 05:52:11PM +0900, Nobuhiro Iwamatsu wrote: > > Your patch does not seem to have a meaning. > > In the case of 29bit, CAC/UNCAC_ADDR may not return a right address. > > I think that it is to use P1SEGADDR, and P2SEGADDR in CAC/UNCAC_ADDR > > to easily revise this. > > I attached my patch. > > > Morimoto-san, does this fix your issue? If you can provide your Tested-by > for this then I'll queue it up and get it off to Linus. Thank you. I tested this patch on linus/master. And this patch solved Ecovec board boot issue. # I tested it on mackerel (SH7372) board too. # It works well Tested-by: Kuninori Morimoto Best regards --- Kuninori Morimoto