From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WZbyT-0003ui-Iz for ath10k@lists.infradead.org; Mon, 14 Apr 2014 08:10:42 +0000 From: Kalle Valo Subject: Re: load module ath10k: ieee80211 phy0: Failed to initialize wep: -2 References: <53461A8A.4030209@candelatech.com> <1397124355-6321-1-git-send-email-michal.kazior@tieto.com> <8738hkh193.fsf@kamboji.qca.qualcomm.com> Date: Mon, 14 Apr 2014 11:10:15 +0300 In-Reply-To: (Michal Kazior's message of "Mon, 14 Apr 2014 08:39:58 +0200") Message-ID: <8738hgfi1k.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Michal Kazior Cc: Vu Hai NGUYEN , Patrick CARNEIRO RODRIGUEZ , "ath10k@lists.infradead.org" Michal Kazior writes: > On 11 April 2014 17:09, Vu Hai NGUYEN wrote: >> Hello everyone, >> I try to load the module of driver ath10k on a cpu marvell 370 which ran linux 3.2.36, my module wifi is WLE900VX. >> These modules was built from backport 3.13.2-1. >> After loading the module, I use the command "lsmod" and saw that 6 modules was loaded. >> But my "dmesg" show an error: >> ieee80211 phy0: Failed to initialize wep: -2 >> And the interface ath0 can not be recognized. ath0 interface? ath10k does not use interface names like that, that smells like the proprietary driver. >> Does any one have any idea about this problem???? > > I'm guessing here, but I suspect you tried to load a backports driver > against cfg80211/mac80211 modules from your distro kernel. Another option is that there's a some sort of problem with the crypto modules. -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k