All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH] drm/i915: Simplify has_sagv
Date: Mon, 22 Oct 2018 09:28:33 +0300	[thread overview]
Message-ID: <874ldeh4vi.fsf@intel.com> (raw)
In-Reply-To: <20181019172042.12939-1-rodrigo.vivi@intel.com>

On Fri, 19 Oct 2018, Rodrigo Vivi <rodrigo.vivi@intel.com> wrote:
> Let's add a platform has_sagv instead of having a full
> function that handle platform by platform.
>
> The specially case for SKL for not controlled sagv
> is already taken care inside intel_enable_sagv, so there's
> no need to duplicate the check here.
>
> v2: Go one step further and remove skl special case. (Jani)
>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Lucas De Marchi <lucas.demarchi@intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.h          |  2 ++
>  drivers/gpu/drm/i915/i915_pci.c          |  1 +
>  drivers/gpu/drm/i915/intel_device_info.h |  1 +
>  drivers/gpu/drm/i915/intel_pm.c          | 20 +++-----------------
>  4 files changed, 7 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 3017ef037fed..8eab6bdff8a4 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2650,6 +2650,8 @@ intel_info(const struct drm_i915_private *dev_priv)
>  #define HAS_DDI(dev_priv)		 ((dev_priv)->info.has_ddi)
>  #define HAS_FPGA_DBG_UNCLAIMED(dev_priv) ((dev_priv)->info.has_fpga_dbg)
>  #define HAS_PSR(dev_priv)		 ((dev_priv)->info.has_psr)
> +#define HAS_SAGV(dev_priv)		 ((dev_priv)->info.has_sagv && \
> +					  dev_priv->sagv_status != I915_SAGV_NOT_CONTROLLED)

Grumble. Somehow it feels wrong to tie the HAS_* macros to some runtime
checks.

Anyway, dev_priv should be wrapped in parens.

BR,
Jani.

>  
>  #define HAS_RC6(dev_priv)		 ((dev_priv)->info.has_rc6)
>  #define HAS_RC6p(dev_priv)		 ((dev_priv)->info.has_rc6p)
> diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
> index 0a05cc7ace14..21ca9917b86e 100644
> --- a/drivers/gpu/drm/i915/i915_pci.c
> +++ b/drivers/gpu/drm/i915/i915_pci.c
> @@ -465,6 +465,7 @@ static const struct intel_device_info intel_cherryview_info = {
>  	.has_csr = 1, \
>  	.has_guc = 1, \
>  	.has_ipc = 1, \
> +	.has_sagv = 1, \
>  	.ddb_size = 896
>  
>  #define SKL_PLATFORM \
> diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
> index af7002640cdf..e77c8b62783f 100644
> --- a/drivers/gpu/drm/i915/intel_device_info.h
> +++ b/drivers/gpu/drm/i915/intel_device_info.h
> @@ -117,6 +117,7 @@ enum intel_ppgtt {
>  	func(hws_needs_physical); \
>  	func(overlay_needs_physical); \
>  	func(supports_tv); \
> +	func(has_sagv); \
>  	func(has_ipc);
>  
>  #define GEN_MAX_SLICES		(6) /* CNL upper bound */
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 67a4d0735291..09c21f6151fd 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3609,20 +3609,6 @@ static bool skl_needs_memory_bw_wa(struct intel_atomic_state *state)
>  	return false;
>  }
>  
> -static bool
> -intel_has_sagv(struct drm_i915_private *dev_priv)
> -{
> -	if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv) ||
> -	    IS_CANNONLAKE(dev_priv) || IS_ICELAKE(dev_priv))
> -		return true;
> -
> -	if (IS_SKYLAKE(dev_priv) &&
> -	    dev_priv->sagv_status != I915_SAGV_NOT_CONTROLLED)
> -		return true;
> -
> -	return false;
> -}
> -
>  /*
>   * SAGV dynamically adjusts the system agent voltage and clock frequencies
>   * depending on power and performance requirements. The display engine access
> @@ -3639,7 +3625,7 @@ intel_enable_sagv(struct drm_i915_private *dev_priv)
>  {
>  	int ret;
>  
> -	if (!intel_has_sagv(dev_priv))
> +	if (!HAS_SAGV(dev_priv))
>  		return 0;
>  
>  	if (dev_priv->sagv_status == I915_SAGV_ENABLED)
> @@ -3676,7 +3662,7 @@ intel_disable_sagv(struct drm_i915_private *dev_priv)
>  {
>  	int ret;
>  
> -	if (!intel_has_sagv(dev_priv))
> +	if (!HAS_SAGV(dev_priv))
>  		return 0;
>  
>  	if (dev_priv->sagv_status == I915_SAGV_DISABLED)
> @@ -3721,7 +3707,7 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
>  	int level, latency;
>  	int sagv_block_time_us;
>  
> -	if (!intel_has_sagv(dev_priv))
> +	if (!HAS_SAGV(dev_priv))
>  		return false;
>  
>  	if (IS_GEN9(dev_priv))

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-10-22  6:28 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-19 17:20 [PATCH] drm/i915: Simplify has_sagv Rodrigo Vivi
2018-10-22  6:28 ` Jani Nikula [this message]
2018-10-22 16:57   ` Rodrigo Vivi
2018-10-22 23:48     ` Paulo Zanoni
2018-10-23  0:06       ` Rodrigo Vivi
2018-10-23  0:32         ` Paulo Zanoni
2018-10-23  7:23     ` Jani Nikula
2018-10-23 19:05       ` Rodrigo Vivi
2018-10-24 10:13         ` Jani Nikula
2018-10-24 17:23           ` Rodrigo Vivi
2018-10-26 20:03       ` [PATCH] drm/i915: Simplify has_sagv function Rodrigo Vivi
2018-10-29 10:08         ` Jani Nikula
2018-10-29 18:58           ` Rodrigo Vivi
2018-10-22 13:13 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Simplify has_sagv Patchwork
2018-10-22 13:14 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-22 13:37 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-22 16:46 ` ✓ Fi.CI.IGT: " Patchwork
2018-10-22 17:20 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Simplify has_sagv (rev2) Patchwork
2018-10-22 17:37 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-22 20:42 ` ✗ Fi.CI.IGT: failure " Patchwork
2018-10-26 21:21 ` ✗ Fi.CI.BAT: failure for drm/i915: Simplify has_sagv (rev3) Patchwork
2018-10-29 15:59 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-29 18:10 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=874ldeh4vi.fsf@intel.com \
    --to=jani.nikula@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.