* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
@ 2021-04-06 9:39 Manuel Reis
2021-04-06 22:16 ` Derald Woods
0 siblings, 1 reply; 8+ messages in thread
From: Manuel Reis @ 2021-04-06 9:39 UTC (permalink / raw)
To: u-boot
in the early SPL boot stage whenever there is a call to udelay,
dm_timer_init fails to find the pit timer whenever it traverses
the device tree, if this property is not present
Signed-off-by: Manuel Reis <mluis.reis@gmail.com>
CC: Eugen Hristev <eugen.hristev@microchip.com>
---
arch/arm/dts/sama5d3.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
index 6ed218eaad..42c30e9f30 100644
--- a/arch/arm/dts/sama5d3.dtsi
+++ b/arch/arm/dts/sama5d3.dtsi
@@ -1320,6 +1320,7 @@
reg = <0xfffffe30 0xf>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&mck>;
+ u-boot,dm-pre-reloc;
};
watchdog at fffffe40 {
--
2.27.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-06 9:39 [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer Manuel Reis
@ 2021-04-06 22:16 ` Derald Woods
2021-04-07 6:32 ` Eugen.Hristev at microchip.com
0 siblings, 1 reply; 8+ messages in thread
From: Derald Woods @ 2021-04-06 22:16 UTC (permalink / raw)
To: u-boot
On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com> wrote:
> in the early SPL boot stage whenever there is a call to udelay,
> dm_timer_init fails to find the pit timer whenever it traverses
> the device tree, if this property is not present
>
> Signed-off-by: Manuel Reis <mluis.reis@gmail.com>
> CC: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> arch/arm/dts/sama5d3.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
> index 6ed218eaad..42c30e9f30 100644
> --- a/arch/arm/dts/sama5d3.dtsi
> +++ b/arch/arm/dts/sama5d3.dtsi
> @@ -1320,6 +1320,7 @@
> reg = <0xfffffe30 0xf>;
> interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
> clocks = <&mck>;
> + u-boot,dm-pre-reloc;
> };
>
> watchdog at fffffe40 {
> --
> 2.27.0
>
>
This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
normally again.
Tested-by: Derald D. Woods <woods.technical@gmail.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-06 22:16 ` Derald Woods
@ 2021-04-07 6:32 ` Eugen.Hristev at microchip.com
2021-04-07 9:16 ` Manuel Luís Reis
2021-04-07 20:07 ` Derald Woods
0 siblings, 2 replies; 8+ messages in thread
From: Eugen.Hristev at microchip.com @ 2021-04-07 6:32 UTC (permalink / raw)
To: u-boot
On 4/7/21 1:16 AM, Derald Woods wrote:
> On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com
> <mailto:mluis.reis@gmail.com>> wrote:
>
> in the early SPL boot stage whenever there is a call to udelay,
> dm_timer_init fails to find the pit timer whenever it traverses
> the device tree, if this property is not present
>
> Signed-off-by: Manuel Reis <mluis.reis@gmail.com
> <mailto:mluis.reis@gmail.com>>
> CC: Eugen Hristev <eugen.hristev@microchip.com
> <mailto:eugen.hristev@microchip.com>>
> ---
> ?arch/arm/dts/sama5d3.dtsi | 1 +
> ?1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
> index 6ed218eaad..42c30e9f30 100644
> --- a/arch/arm/dts/sama5d3.dtsi
> +++ b/arch/arm/dts/sama5d3.dtsi
> @@ -1320,6 +1320,7 @@
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? reg = <0xfffffe30 0xf>;
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? clocks = <&mck>;
> +? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?u-boot,dm-pre-reloc;
> ? ? ? ? ? ? ? ? ? ? ? ? };
>
> ? ? ? ? ? ? ? ? ? ? ? ? watchdog at fffffe40 {
> --
> 2.27.0
>
>
> This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
> normally again.
>
> Tested-by: Derald D. Woods <woods.technical@gmail.com
> <mailto:woods.technical@gmail.com>>
>
Hi Derald,
Could I ask, you are using the SPL to boot your board ?
Did you have to remove any udelay from the ddr2_init code , or it booted
out of the box by applying this patch only ?
Thanks,
Eugen
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-07 6:32 ` Eugen.Hristev at microchip.com
@ 2021-04-07 9:16 ` Manuel Luís Reis
2021-04-07 9:31 ` Eugen.Hristev at microchip.com
2021-04-07 20:07 ` Derald Woods
1 sibling, 1 reply; 8+ messages in thread
From: Manuel Luís Reis @ 2021-04-07 9:16 UTC (permalink / raw)
To: u-boot
Hi,
@Derald: Thanks for trying this out.
@Eugen: For what is worth, I can also confirm that I also tried with
the latest version v2021.04 and the board boots OK out of the box with
this patch only.
------------------------------------------------
RomBOOT
<debug_uart>
U-Boot SPL 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
Trying to boot from MMC1
<debug_uart>
U-Boot 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
CPU: SAMA5D36
Crystal frequency: 12 MHz
.....
------------------------------------------------
Thanks,
Manuel
On Wed, 7 Apr 2021 at 07:32, <Eugen.Hristev@microchip.com> wrote:
>
> On 4/7/21 1:16 AM, Derald Woods wrote:
> > On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com
> > <mailto:mluis.reis@gmail.com>> wrote:
> >
> > in the early SPL boot stage whenever there is a call to udelay,
> > dm_timer_init fails to find the pit timer whenever it traverses
> > the device tree, if this property is not present
> >
> > Signed-off-by: Manuel Reis <mluis.reis@gmail.com
> > <mailto:mluis.reis@gmail.com>>
> > CC: Eugen Hristev <eugen.hristev@microchip.com
> > <mailto:eugen.hristev@microchip.com>>
> > ---
> > arch/arm/dts/sama5d3.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
> > index 6ed218eaad..42c30e9f30 100644
> > --- a/arch/arm/dts/sama5d3.dtsi
> > +++ b/arch/arm/dts/sama5d3.dtsi
> > @@ -1320,6 +1320,7 @@
> > reg = <0xfffffe30 0xf>;
> > interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
> > clocks = <&mck>;
> > + u-boot,dm-pre-reloc;
> > };
> >
> > watchdog at fffffe40 {
> > --
> > 2.27.0
> >
> >
> > This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
> > normally again.
> >
> > Tested-by: Derald D. Woods <woods.technical@gmail.com
> > <mailto:woods.technical@gmail.com>>
> >
>
> Hi Derald,
>
> Could I ask, you are using the SPL to boot your board ?
> Did you have to remove any udelay from the ddr2_init code , or it booted
> out of the box by applying this patch only ?
>
> Thanks,
> Eugen
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-07 9:16 ` Manuel Luís Reis
@ 2021-04-07 9:31 ` Eugen.Hristev at microchip.com
2021-04-07 9:39 ` Manuel Luís Reis
0 siblings, 1 reply; 8+ messages in thread
From: Eugen.Hristev at microchip.com @ 2021-04-07 9:31 UTC (permalink / raw)
To: u-boot
On 4/7/21 12:16 PM, Manuel Lu?s Reis wrote:
> Hi,
>
> @Derald: Thanks for trying this out.
>
> @Eugen: For what is worth, I can also confirm that I also tried with
> the latest version v2021.04 and the board boots OK out of the box with
> this patch only.
>
Ok, great news ! Thanks.
Until this patch can reach the master of u-boot, if anyone needs a tree,
you can have my testing branch in u-boot-atmel custodian tree at denx:
https://source.denx.de/u-boot/custodians/u-boot-atmel/-/tree/testing
Eugen
> ------------------------------------------------
> RomBOOT
> <debug_uart>
> U-Boot SPL 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
> Trying to boot from MMC1
> <debug_uart>
> U-Boot 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
> CPU: SAMA5D36
> Crystal frequency: 12 MHz
> .....
> ------------------------------------------------
>
> Thanks,
> Manuel
>
> On Wed, 7 Apr 2021 at 07:32, <Eugen.Hristev@microchip.com> wrote:
>>
>> On 4/7/21 1:16 AM, Derald Woods wrote:
>>> On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com
>>> <mailto:mluis.reis@gmail.com>> wrote:
>>>
>>> in the early SPL boot stage whenever there is a call to udelay,
>>> dm_timer_init fails to find the pit timer whenever it traverses
>>> the device tree, if this property is not present
>>>
>>> Signed-off-by: Manuel Reis <mluis.reis@gmail.com
>>> <mailto:mluis.reis@gmail.com>>
>>> CC: Eugen Hristev <eugen.hristev@microchip.com
>>> <mailto:eugen.hristev@microchip.com>>
>>> ---
>>> arch/arm/dts/sama5d3.dtsi | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
>>> index 6ed218eaad..42c30e9f30 100644
>>> --- a/arch/arm/dts/sama5d3.dtsi
>>> +++ b/arch/arm/dts/sama5d3.dtsi
>>> @@ -1320,6 +1320,7 @@
>>> reg = <0xfffffe30 0xf>;
>>> interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
>>> clocks = <&mck>;
>>> + u-boot,dm-pre-reloc;
>>> };
>>>
>>> watchdog at fffffe40 {
>>> --
>>> 2.27.0
>>>
>>>
>>> This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
>>> normally again.
>>>
>>> Tested-by: Derald D. Woods <woods.technical@gmail.com
>>> <mailto:woods.technical@gmail.com>>
>>>
>>
>> Hi Derald,
>>
>> Could I ask, you are using the SPL to boot your board ?
>> Did you have to remove any udelay from the ddr2_init code , or it booted
>> out of the box by applying this patch only ?
>>
>> Thanks,
>> Eugen
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-07 9:31 ` Eugen.Hristev at microchip.com
@ 2021-04-07 9:39 ` Manuel Luís Reis
2021-04-19 7:40 ` Eugen.Hristev at microchip.com
0 siblings, 1 reply; 8+ messages in thread
From: Manuel Luís Reis @ 2021-04-07 9:39 UTC (permalink / raw)
To: u-boot
Great, thanks for your help.
Cheers
Manuel
M. Lu?s Reis MSc MIET Chartered Engineer
On Wed, 7 Apr 2021 at 10:31, <Eugen.Hristev@microchip.com> wrote:
>
> On 4/7/21 12:16 PM, Manuel Lu?s Reis wrote:
> > Hi,
> >
> > @Derald: Thanks for trying this out.
> >
> > @Eugen: For what is worth, I can also confirm that I also tried with
> > the latest version v2021.04 and the board boots OK out of the box with
> > this patch only.
> >
>
> Ok, great news ! Thanks.
>
> Until this patch can reach the master of u-boot, if anyone needs a tree,
> you can have my testing branch in u-boot-atmel custodian tree at denx:
>
> https://source.denx.de/u-boot/custodians/u-boot-atmel/-/tree/testing
>
> Eugen
>
> > ------------------------------------------------
> > RomBOOT
> > <debug_uart>
> > U-Boot SPL 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
> > Trying to boot from MMC1
> > <debug_uart>
> > U-Boot 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
> > CPU: SAMA5D36
> > Crystal frequency: 12 MHz
> > .....
> > ------------------------------------------------
> >
> > Thanks,
> > Manuel
> >
> > On Wed, 7 Apr 2021 at 07:32, <Eugen.Hristev@microchip.com> wrote:
> >>
> >> On 4/7/21 1:16 AM, Derald Woods wrote:
> >>> On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com
> >>> <mailto:mluis.reis@gmail.com>> wrote:
> >>>
> >>> in the early SPL boot stage whenever there is a call to udelay,
> >>> dm_timer_init fails to find the pit timer whenever it traverses
> >>> the device tree, if this property is not present
> >>>
> >>> Signed-off-by: Manuel Reis <mluis.reis@gmail.com
> >>> <mailto:mluis.reis@gmail.com>>
> >>> CC: Eugen Hristev <eugen.hristev@microchip.com
> >>> <mailto:eugen.hristev@microchip.com>>
> >>> ---
> >>> arch/arm/dts/sama5d3.dtsi | 1 +
> >>> 1 file changed, 1 insertion(+)
> >>>
> >>> diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
> >>> index 6ed218eaad..42c30e9f30 100644
> >>> --- a/arch/arm/dts/sama5d3.dtsi
> >>> +++ b/arch/arm/dts/sama5d3.dtsi
> >>> @@ -1320,6 +1320,7 @@
> >>> reg = <0xfffffe30 0xf>;
> >>> interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
> >>> clocks = <&mck>;
> >>> + u-boot,dm-pre-reloc;
> >>> };
> >>>
> >>> watchdog at fffffe40 {
> >>> --
> >>> 2.27.0
> >>>
> >>>
> >>> This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
> >>> normally again.
> >>>
> >>> Tested-by: Derald D. Woods <woods.technical@gmail.com
> >>> <mailto:woods.technical@gmail.com>>
> >>>
> >>
> >> Hi Derald,
> >>
> >> Could I ask, you are using the SPL to boot your board ?
> >> Did you have to remove any udelay from the ddr2_init code , or it booted
> >> out of the box by applying this patch only ?
> >>
> >> Thanks,
> >> Eugen
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-07 6:32 ` Eugen.Hristev at microchip.com
2021-04-07 9:16 ` Manuel Luís Reis
@ 2021-04-07 20:07 ` Derald Woods
1 sibling, 0 replies; 8+ messages in thread
From: Derald Woods @ 2021-04-07 20:07 UTC (permalink / raw)
To: u-boot
On Wed, Apr 7, 2021 at 1:32 AM <Eugen.Hristev@microchip.com> wrote:
> On 4/7/21 1:16 AM, Derald Woods wrote:
> > On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com
> > <mailto:mluis.reis@gmail.com>> wrote:
> >
> > in the early SPL boot stage whenever there is a call to udelay,
> > dm_timer_init fails to find the pit timer whenever it traverses
> > the device tree, if this property is not present
> >
> > Signed-off-by: Manuel Reis <mluis.reis@gmail.com
> > <mailto:mluis.reis@gmail.com>>
> > CC: Eugen Hristev <eugen.hristev@microchip.com
> > <mailto:eugen.hristev@microchip.com>>
> > ---
> > arch/arm/dts/sama5d3.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
> > index 6ed218eaad..42c30e9f30 100644
> > --- a/arch/arm/dts/sama5d3.dtsi
> > +++ b/arch/arm/dts/sama5d3.dtsi
> > @@ -1320,6 +1320,7 @@
> > reg = <0xfffffe30 0xf>;
> > interrupts = <3 IRQ_TYPE_LEVEL_HIGH
> 5>;
> > clocks = <&mck>;
> > + u-boot,dm-pre-reloc;
> > };
> >
> > watchdog at fffffe40 {
> > --
> > 2.27.0
> >
> >
> > This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
> > normally again.
> >
> > Tested-by: Derald D. Woods <woods.technical@gmail.com
> > <mailto:woods.technical@gmail.com>>
> >
>
> Hi Derald,
>
> Could I ask, you are using the SPL to boot your board ?
> Did you have to remove any udelay from the ddr2_init code , or it booted
> out of the box by applying this patch only ?
>
With just this patch on top of v2021.04, the board booted as expected. It
did not work with v2021.01. So this patch works for "v2021.04" onward. I
did not touch ddr2_init code.
Derald
>
> Thanks,
> Eugen
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
2021-04-07 9:39 ` Manuel Luís Reis
@ 2021-04-19 7:40 ` Eugen.Hristev at microchip.com
0 siblings, 0 replies; 8+ messages in thread
From: Eugen.Hristev at microchip.com @ 2021-04-19 7:40 UTC (permalink / raw)
To: u-boot
On 4/7/21 12:39 PM, Manuel Lu?s Reis wrote:
> Great, thanks for your help.
>
> Cheers
> Manuel
>
> M. Lu?s Reis MSc MIET Chartered Engineer
>
>
>
> On Wed, 7 Apr 2021 at 10:31, <Eugen.Hristev@microchip.com> wrote:
>>
>> On 4/7/21 12:16 PM, Manuel Lu?s Reis wrote:
>>> Hi,
>>>
>>> @Derald: Thanks for trying this out.
>>>
>>> @Eugen: For what is worth, I can also confirm that I also tried with
>>> the latest version v2021.04 and the board boots OK out of the box with
>>> this patch only.
>>>
>>
>> Ok, great news ! Thanks.
>>
>> Until this patch can reach the master of u-boot, if anyone needs a tree,
>> you can have my testing branch in u-boot-atmel custodian tree at denx:
>>
>> https://source.denx.de/u-boot/custodians/u-boot-atmel/-/tree/testing
>>
>> Eugen
>>
>>> ------------------------------------------------
>>> RomBOOT
>>> <debug_uart>
>>> U-Boot SPL 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
>>> Trying to boot from MMC1
>>> <debug_uart>
>>> U-Boot 2021.04-00372-g90eba245a6-dirty (Apr 07 2021 - 10:05:18 +0100)
>>> CPU: SAMA5D36
>>> Crystal frequency: 12 MHz
>>> .....
>>> ------------------------------------------------
>>>
>>> Thanks,
>>> Manuel
>>>
>>> On Wed, 7 Apr 2021 at 07:32, <Eugen.Hristev@microchip.com> wrote:
>>>>
>>>> On 4/7/21 1:16 AM, Derald Woods wrote:
>>>>> On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis@gmail.com
>>>>> <mailto:mluis.reis@gmail.com>> wrote:
>>>>>
>>>>> in the early SPL boot stage whenever there is a call to udelay,
>>>>> dm_timer_init fails to find the pit timer whenever it traverses
>>>>> the device tree, if this property is not present
>>>>>
>>>>> Signed-off-by: Manuel Reis <mluis.reis@gmail.com
>>>>> <mailto:mluis.reis@gmail.com>>
>>>>> CC: Eugen Hristev <eugen.hristev@microchip.com
>>>>> <mailto:eugen.hristev@microchip.com>>
>>>>> ---
>>>>> arch/arm/dts/sama5d3.dtsi | 1 +
>>>>> 1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
>>>>> index 6ed218eaad..42c30e9f30 100644
>>>>> --- a/arch/arm/dts/sama5d3.dtsi
>>>>> +++ b/arch/arm/dts/sama5d3.dtsi
>>>>> @@ -1320,6 +1320,7 @@
>>>>> reg = <0xfffffe30 0xf>;
>>>>> interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
>>>>> clocks = <&mck>;
>>>>> + u-boot,dm-pre-reloc;
>>>>> };
>>>>>
>>>>> watchdog at fffffe40 {
>>>>> --
>>>>> 2.27.0
>>>>>
>>>>>
>>>>> This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot
>>>>> normally again.
>>>>>
>>>>> Tested-by: Derald D. Woods <woods.technical@gmail.com
>>>>> <mailto:woods.technical@gmail.com>>
Applied to u-boot-atmel/master, thanks, and,
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
>>>>>
>>>>
>>>> Hi Derald,
>>>>
>>>> Could I ask, you are using the SPL to boot your board ?
>>>> Did you have to remove any udelay from the ddr2_init code , or it booted
>>>> out of the box by applying this patch only ?
>>>>
>>>> Thanks,
>>>> Eugen
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-04-19 7:40 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-06 9:39 [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer Manuel Reis
2021-04-06 22:16 ` Derald Woods
2021-04-07 6:32 ` Eugen.Hristev at microchip.com
2021-04-07 9:16 ` Manuel Luís Reis
2021-04-07 9:31 ` Eugen.Hristev at microchip.com
2021-04-07 9:39 ` Manuel Luís Reis
2021-04-19 7:40 ` Eugen.Hristev at microchip.com
2021-04-07 20:07 ` Derald Woods
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.