[Buildroot] Problem making buildroot

[Buildroot] Problem making buildroot

[jdzielski]

Sorry if this is a multiple post.  It's showing up in the list that I see but
there is an indication that he message hasn't been accepted.  

Hi,
    I'm new at trying to do things at this level, but I'm trying to make the
buildroot on Ubuntu 8.04.  I've been following the instructions at
http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight
forward.  There were a couple errors that I managed to fix, but I've reached
a point where I'm not sure what the make file is trying to do.  The command
that is being executed by the main make is:

make -j3 -C
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build
all

THE OUTPUT OF THE COMMAND IS:

make[1]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
make[2]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
make[2]: Nothing to be done for `all-target'.
make[3]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl'
make[3]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty'
make[4]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite'
make[3]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
for f in standards.info configure.info; do \
	  if test -f
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/etc/`echo
$f | sed -e 's/.info$/.texi/'`; then \
	    if make
"MAKEINFO=/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000" $f; then \
	      true; \
	    else \
	      exit 1; \
	    fi; \
	  fi; \
	done
make[3]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty'
make[4]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
make[4]: `standards.info' is up to date.
make[4]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
mkdir -p -- ./ld
Configuring in ./ld
make[4]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
make[4]: `configure.info' is up to date.
make[4]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
make[3]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
make[3]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
Making info in doc
make[4]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
restore=: && backupdir=".am$$" && \
	am__cwd=`pwd` && cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
&& \
	rm -rf $backupdir && mkdir $backupdir && \
	if
(/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000 --version) >/dev/null
2>&1; then \
	  for f in
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9]
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9][0-9]
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9]
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9][0-9];
do \
	    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$am__cwd"; \
	if
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
makeinfo --split-size=5000000 --split-size=5000000   -I
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
\
	 -o
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.texinfo;
\
	then \
	  rc=0; \
	  cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc;
\
	else \
	  rc=$?; \
	  cd
/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
&& \
	  $restore $backupdir/* `echo
".//home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info"
| sed 's|[^/]*$||'`; \
	fi; \
	rm -rf $backupdir; exit $rc
WARNING: `makeinfo' is missing on your system.  You should only need it if
         you modified a `.texi' or `.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy `make' (AIX,
         DU, IRIX).  You might want to install the `Texinfo' package or
         the `GNU make' package.  Grab either from any GNU archive site.
make[4]: ***
[/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info]
Error 1
make[4]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
Making info in po
make[4]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po'
make[4]: Nothing to be done for `info'.
make[4]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po'
make[4]: Entering directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
make[4]: Nothing to be done for `info-am'.
make[4]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
make[3]: *** [info-recursive] Error 1
make[3]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
make[2]: *** [all-bfd] Error 2
make[2]: *** Waiting for unfinished jobs....
configure: creating cache ./config.cache
checking build system type... i386-pc-linux-gnu
checking host system type... i386-pc-linux-gnu
checking target system type... arm-unknown-linux-uclibcgnueabi
checking for i386-pc-linux-gnu-gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for library containing strerror... none required
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for ld used by GCC... ld
checking if the linker (ld) is GNU ld... yes
checking for ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking the maximum length of command line arguments... none
checking for i386-pc-linux-gnu-ranlib... ranlib
checking for i386-pc-linux-gnu-strip... no
checking for strip... strip
updating cache ./config.cache
loading cache ./config.cache within ltconfig
checking whether -lc should be explicitly linked in... no
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
finding the maximum length of command line arguments... 49153
checking if gcc supports -c -o file.o... yes
checking if gcc supports -fno-rtti -fno-exceptions ... no
checking whether the linker (ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking command to parse nm output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
updating cache ./config.cache
configure: loading cache ./config.cache
Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes
checking for i386-pc-linux-gnu-gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether NLS is requested... no
checking whether NLS is requested... no
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for bison... bison -y
checking for flex... flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking elf-hints.h usability... no
checking elf-hints.h presence... no
checking for elf-hints.h... no
checking for sbrk... yes
checking for realpath... yes
checking for glob... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for a known getopt prototype in unistd.h... yes
checking whether strstr is declared... yes
checking whether free is declared... yes
checking whether sbrk is declared... yes
checking whether getenv is declared... yes
checking whether environ is declared... no
checking whether ANSI C string concatenation works... yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
make[2]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
make: ***
[/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/binutils/objdump]
Error 2


Thanks for any help that you can provide.
-- 
View this message in context: http://www.nabble.com/Problem-making-buildroot-tp24075410p24075410.html
Sent from the BuildRoot mailing list archive at Nabble.com.

[Buildroot] Problem making buildroot

[Will Newton]

On Wed, Jun 17, 2009 at 4:25 PM, jdzielski<jdzielski@stevens.edu> wrote:
>
> Sorry if this is a multiple post. ?It's showing up in the list that I see but
> there is an indication that he message hasn't been accepted.
>
> Hi,
> ? ?I'm new at trying to do things at this level, but I'm trying to make the
> buildroot on Ubuntu 8.04. ?I've been following the instructions at
> http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight
> forward. ?There were a couple errors that I managed to fix, but I've reached
> a point where I'm not sure what the make file is trying to do. ?The command
> that is being executed by the main make is:

I believe that the problem is caused by a combination of an old
binutils and a newer version of texinfo. Try using a newer binutils if
possible.

[Buildroot] Problem making buildroot

[Peter Korsgaard]

>>>>> "jdzielski" == jdzielski  <jdzielski@stevens.edu> writes:

Hi,

 jdzielski> Sorry if this is a multiple post.  It's showing up in the
 jdzielski> list that I see but there is an indication that he message
 jdzielski> hasn't been accepted.

 jdzielski> Hi,
 jdzielski>     I'm new at trying to do things at this level, but I'm trying to make the
 jdzielski> buildroot on Ubuntu 8.04.  I've been following the instructions at
 jdzielski> http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight

You should probably ask the gumstix people for details, but this looks
like the problem with binutils 2.17.x only expecting makeinfo to have
a single digit after the '.' in it's version, and hence breaking with
makeinfo 4.1x.

We have a patch for that:

http://git.buildroot.net/buildroot/tree/toolchain/binutils/2.17/500-fix-makeinfo-check.patch

Any particular reason why you are using such an old binutils version?

-- 
Bye, Peter Korsgaard

[Buildroot] Problem making buildroot

[Lionel Landwerlin]

The customized buildroot version you're pointing out is more than a year
old. I don't think you're going to find a lot of support here.

You better try to shake up gumstix ;)

Otherwise you can find the official stable version here :

http://buildroot.uclibc.org/download.html

or the development version on git :

http://buildroot.uclibc.org/git.html

Regards,

--
Lionel Landwerlin 

Le jeudi 14 octobre 2010 ? 11:16 -0700, vishnu87 a ?crit :
> Hi Jed ,
> I am presently facing exactly the same problem , on a Debian system kernel
> 2.6.32....
> It would be great if you have found the solution and could post it ..
> Thanks 
> 
> Vishnu
> 
> 
> 
> jdzielski wrote:
> > 
> > Sorry if this is a multiple post.  It's showing up in the list that I see
> > but there is an indication that he message hasn't been accepted.  
> > 
> > Hi,
> >     I'm new at trying to do things at this level, but I'm trying to make
> > the buildroot on Ubuntu 8.04.  I've been following the instructions at
> > http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight
> > forward.  There were a couple errors that I managed to fix, but I've
> > reached a point where I'm not sure what the make file is trying to do. 
> > The command that is being executed by the main make is:
> > 
> > make -j3 -C
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build
> > all
> > 
> > THE OUTPUT OF THE COMMAND IS:
> > 
> > make[1]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> > make[2]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> > make[2]: Nothing to be done for `all-target'.
> > make[3]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl'
> > make[3]: Nothing to be done for `all'.
> > make[3]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl'
> > make[3]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty'
> > make[4]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite'
> > make[4]: Nothing to be done for `all'.
> > make[4]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite'
> > make[3]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> > for f in standards.info configure.info; do \
> > 	  if test -f
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/etc/`echo
> > $f | sed -e 's/.info$/.texi/'`; then \
> > 	    if make
> > "MAKEINFO=/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
> > makeinfo --split-size=5000000 --split-size=5000000" $f; then \
> > 	      true; \
> > 	    else \
> > 	      exit 1; \
> > 	    fi; \
> > 	  fi; \
> > 	done
> > make[3]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty'
> > make[4]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> > make[4]: `standards.info' is up to date.
> > make[4]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> > mkdir -p -- ./ld
> > Configuring in ./ld
> > make[4]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> > make[4]: `configure.info' is up to date.
> > make[4]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> > make[3]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> > make[3]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> > Making info in doc
> > make[4]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
> > restore=: && backupdir=".am$$" && \
> > 	am__cwd=`pwd` && cd
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
> > && \
> > 	rm -rf $backupdir && mkdir $backupdir && \
> > 	if
> > (/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
> > makeinfo --split-size=5000000 --split-size=5000000 --version) >/dev/null
> > 2>&1; then \
> > 	  for f in
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9]
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9][0-9]
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9]
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9][0-9];
> > do \
> > 	    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
> > 	  done; \
> > 	else :; fi && \
> > 	cd "$am__cwd"; \
> > 	if
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
> > makeinfo --split-size=5000000 --split-size=5000000   -I
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
> > \
> > 	 -o
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.texinfo;
> > \
> > 	then \
> > 	  rc=0; \
> > 	  cd
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc;
> > \
> > 	else \
> > 	  rc=$?; \
> > 	  cd
> > /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
> > && \
> > 	  $restore $backupdir/* `echo
> > ".//home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info"
> > | sed 's|[^/]*$||'`; \
> > 	fi; \
> > 	rm -rf $backupdir; exit $rc
> > WARNING: `makeinfo' is missing on your system.  You should only need it if
> >          you modified a `.texi' or `.texinfo' file, or any other file
> >          indirectly affecting the aspect of the manual.  The spurious
> >          call might also be the consequence of using a buggy `make' (AIX,
> >          DU, IRIX).  You might want to install the `Texinfo' package or
> >          the `GNU make' package.  Grab either from any GNU archive site.
> > make[4]: ***
> > [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info]
> > Error 1
> > make[4]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
> > Making info in po
> > make[4]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po'
> > make[4]: Nothing to be done for `info'.
> > make[4]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po'
> > make[4]: Entering directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> > make[4]: Nothing to be done for `info-am'.
> > make[4]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> > make[3]: *** [info-recursive] Error 1
> > make[3]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> > make[2]: *** [all-bfd] Error 2
> > make[2]: *** Waiting for unfinished jobs....
> > configure: creating cache ./config.cache
> > checking build system type... i386-pc-linux-gnu
> > checking host system type... i386-pc-linux-gnu
> > checking target system type... arm-unknown-linux-uclibcgnueabi
> > checking for i386-pc-linux-gnu-gcc... gcc
> > checking for C compiler default output file name... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for suffix of executables... 
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking for gcc option to accept ANSI C... none needed
> > checking for library containing strerror... none required
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking for gawk... no
> > checking for mawk... mawk
> > checking whether make sets $(MAKE)... yes
> > checking for style of include used by make... GNU
> > checking dependency style of gcc... gcc3
> > checking for ld used by GCC... ld
> > checking if the linker (ld) is GNU ld... yes
> > checking for ld option to reload object files... -r
> > checking for BSD-compatible nm... nm
> > checking whether ln -s works... yes
> > checking how to recognise dependant libraries... pass_all
> > checking the maximum length of command line arguments... none
> > checking for i386-pc-linux-gnu-ranlib... ranlib
> > checking for i386-pc-linux-gnu-strip... no
> > checking for strip... strip
> > updating cache ./config.cache
> > loading cache ./config.cache within ltconfig
> > checking whether -lc should be explicitly linked in... no
> > checking for objdir... .libs
> > checking for gcc option to produce PIC... -fPIC -DPIC
> > checking if gcc PIC flag -fPIC -DPIC works... yes
> > checking if gcc static flag -static works... yes
> > finding the maximum length of command line arguments... 49153
> > checking if gcc supports -c -o file.o... yes
> > checking if gcc supports -fno-rtti -fno-exceptions ... no
> > checking whether the linker (ld) supports shared libraries... yes
> > checking how to hardcode library paths into programs... immediate
> > checking whether stripping libraries is possible... yes
> > checking dynamic linker characteristics... GNU/Linux ld.so
> > checking command to parse nm output... ok
> > checking if libtool supports shared libraries... yes
> > checking whether to build shared libraries... yes
> > checking whether to build static libraries... yes
> > creating libtool
> > updating cache ./config.cache
> > configure: loading cache ./config.cache
> > Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes
> > checking for i386-pc-linux-gnu-gcc... (cached) gcc
> > checking whether we are using the GNU C compiler... (cached) yes
> > checking whether gcc accepts -g... (cached) yes
> > checking for gcc option to accept ANSI C... (cached) none needed
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking whether NLS is requested... no
> > checking whether NLS is requested... no
> > checking for msgfmt... /usr/bin/msgfmt
> > checking for gmsgfmt... /usr/bin/msgfmt
> > checking for xgettext... /usr/bin/xgettext
> > checking for msgmerge... /usr/bin/msgmerge
> > checking for bison... bison -y
> > checking for flex... flex
> > checking for yywrap in -lfl... yes
> > checking lex output file root... lex.yy
> > checking whether yytext is a pointer... yes
> > checking whether to enable maintainer-specific portions of Makefiles... no
> > checking how to run the C preprocessor... gcc -E
> > checking for egrep... grep -E
> > checking for ANSI C header files... yes
> > checking for sys/types.h... yes
> > checking for sys/stat.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... yes
> > checking for memory.h... yes
> > checking for strings.h... yes
> > checking for inttypes.h... yes
> > checking for stdint.h... yes
> > checking for unistd.h... yes
> > checking for string.h... (cached) yes
> > checking for strings.h... (cached) yes
> > checking for stdlib.h... (cached) yes
> > checking for unistd.h... (cached) yes
> > checking elf-hints.h usability... no
> > checking elf-hints.h presence... no
> > checking for elf-hints.h... no
> > checking for sbrk... yes
> > checking for realpath... yes
> > checking for glob... yes
> > checking for dirent.h that defines DIR... yes
> > checking for library containing opendir... none required
> > checking for a known getopt prototype in unistd.h... yes
> > checking whether strstr is declared... yes
> > checking whether free is declared... yes
> > checking whether sbrk is declared... yes
> > checking whether getenv is declared... yes
> > checking whether environ is declared... no
> > checking whether ANSI C string concatenation works... yes
> > updating cache ./config.cache
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating po/Makefile.in
> > config.status: creating config.h
> > config.status: executing depfiles commands
> > config.status: executing default-1 commands
> > config.status: creating po/POTFILES
> > config.status: creating po/Makefile
> > make[2]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> > make[1]: *** [all] Error 2
> > make[1]: Leaving directory
> > `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> > make: ***
> > [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/binutils/objdump]
> > Error 2
> > 
> > 
> > Thanks for any help that you can provide.
> > 
> 

[Buildroot] Problem making buildroot

[vishnu87]

Hi Jed ,
I am presently facing exactly the same problem , on a Debian system kernel
2.6.32....
It would be great if you have found the solution and could post it ..
Thanks 

Vishnu



jdzielski wrote:
> 
> Sorry if this is a multiple post.  It's showing up in the list that I see
> but there is an indication that he message hasn't been accepted.  
> 
> Hi,
>     I'm new at trying to do things at this level, but I'm trying to make
> the buildroot on Ubuntu 8.04.  I've been following the instructions at
> http://docwiki.gumstix.org/index.php/Buildroot which is pretty straight
> forward.  There were a couple errors that I managed to fix, but I've
> reached a point where I'm not sure what the make file is trying to do. 
> The command that is being executed by the main make is:
> 
> make -j3 -C
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build
> all
> 
> THE OUTPUT OF THE COMMAND IS:
> 
> make[1]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> make[2]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> make[2]: Nothing to be done for `all-target'.
> make[3]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/intl'
> make[3]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty'
> make[4]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite'
> make[4]: Nothing to be done for `all'.
> make[4]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty/testsuite'
> make[3]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> for f in standards.info configure.info; do \
> 	  if test -f
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/etc/`echo
> $f | sed -e 's/.info$/.texi/'`; then \
> 	    if make
> "MAKEINFO=/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
> makeinfo --split-size=5000000 --split-size=5000000" $f; then \
> 	      true; \
> 	    else \
> 	      exit 1; \
> 	    fi; \
> 	  fi; \
> 	done
> make[3]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/libiberty'
> make[4]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> make[4]: `standards.info' is up to date.
> make[4]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> mkdir -p -- ./ld
> Configuring in ./ld
> make[4]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> make[4]: `configure.info' is up to date.
> make[4]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> make[3]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/etc'
> make[3]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> Making info in doc
> make[4]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
> restore=: && backupdir=".am$$" && \
> 	am__cwd=`pwd` && cd
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
> && \
> 	rm -rf $backupdir && mkdir $backupdir && \
> 	if
> (/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
> makeinfo --split-size=5000000 --split-size=5000000 --version) >/dev/null
> 2>&1; then \
> 	  for f in
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9]
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info-[0-9][0-9]
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9]
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.i[0-9][0-9];
> do \
> 	    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
> 	  done; \
> 	else :; fi && \
> 	cd "$am__cwd"; \
> 	if
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/missing
> makeinfo --split-size=5000000 --split-size=5000000   -I
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
> \
> 	 -o
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.texinfo;
> \
> 	then \
> 	  rc=0; \
> 	  cd
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc;
> \
> 	else \
> 	  rc=$?; \
> 	  cd
> /home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc
> && \
> 	  $restore $backupdir/* `echo
> ".//home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info"
> | sed 's|[^/]*$||'`; \
> 	fi; \
> 	rm -rf $backupdir; exit $rc
> WARNING: `makeinfo' is missing on your system.  You should only need it if
>          you modified a `.texi' or `.texinfo' file, or any other file
>          indirectly affecting the aspect of the manual.  The spurious
>          call might also be the consequence of using a buggy `make' (AIX,
>          DU, IRIX).  You might want to install the `Texinfo' package or
>          the `GNU make' package.  Grab either from any GNU archive site.
> make[4]: ***
> [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6/bfd/doc/bfd.info]
> Error 1
> make[4]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/doc'
> Making info in po
> make[4]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po'
> make[4]: Nothing to be done for `info'.
> make[4]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd/po'
> make[4]: Entering directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> make[4]: Nothing to be done for `info-am'.
> make[4]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> make[3]: *** [info-recursive] Error 1
> make[3]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/bfd'
> make[2]: *** [all-bfd] Error 2
> make[2]: *** Waiting for unfinished jobs....
> configure: creating cache ./config.cache
> checking build system type... i386-pc-linux-gnu
> checking host system type... i386-pc-linux-gnu
> checking target system type... arm-unknown-linux-uclibcgnueabi
> checking for i386-pc-linux-gnu-gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables... 
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking for library containing strerror... none required
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for gawk... no
> checking for mawk... mawk
> checking whether make sets $(MAKE)... yes
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking for ld used by GCC... ld
> checking if the linker (ld) is GNU ld... yes
> checking for ld option to reload object files... -r
> checking for BSD-compatible nm... nm
> checking whether ln -s works... yes
> checking how to recognise dependant libraries... pass_all
> checking the maximum length of command line arguments... none
> checking for i386-pc-linux-gnu-ranlib... ranlib
> checking for i386-pc-linux-gnu-strip... no
> checking for strip... strip
> updating cache ./config.cache
> loading cache ./config.cache within ltconfig
> checking whether -lc should be explicitly linked in... no
> checking for objdir... .libs
> checking for gcc option to produce PIC... -fPIC -DPIC
> checking if gcc PIC flag -fPIC -DPIC works... yes
> checking if gcc static flag -static works... yes
> finding the maximum length of command line arguments... 49153
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -fno-rtti -fno-exceptions ... no
> checking whether the linker (ld) supports shared libraries... yes
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking command to parse nm output... ok
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> creating libtool
> updating cache ./config.cache
> configure: loading cache ./config.cache
> Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes
> checking for i386-pc-linux-gnu-gcc... (cached) gcc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for gcc option to accept ANSI C... (cached) none needed
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether NLS is requested... no
> checking whether NLS is requested... no
> checking for msgfmt... /usr/bin/msgfmt
> checking for gmsgfmt... /usr/bin/msgfmt
> checking for xgettext... /usr/bin/xgettext
> checking for msgmerge... /usr/bin/msgmerge
> checking for bison... bison -y
> checking for flex... flex
> checking for yywrap in -lfl... yes
> checking lex output file root... lex.yy
> checking whether yytext is a pointer... yes
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking how to run the C preprocessor... gcc -E
> checking for egrep... grep -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for string.h... (cached) yes
> checking for strings.h... (cached) yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking elf-hints.h usability... no
> checking elf-hints.h presence... no
> checking for elf-hints.h... no
> checking for sbrk... yes
> checking for realpath... yes
> checking for glob... yes
> checking for dirent.h that defines DIR... yes
> checking for library containing opendir... none required
> checking for a known getopt prototype in unistd.h... yes
> checking whether strstr is declared... yes
> checking whether free is declared... yes
> checking whether sbrk is declared... yes
> checking whether getenv is declared... yes
> checking whether environ is declared... no
> checking whether ANSI C string concatenation works... yes
> updating cache ./config.cache
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating po/Makefile.in
> config.status: creating config.h
> config.status: executing depfiles commands
> config.status: executing default-1 commands
> config.status: creating po/POTFILES
> config.status: creating po/Makefile
> make[2]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> make[1]: *** [all] Error 2
> make[1]: Leaving directory
> `/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build'
> make: ***
> [/home/jed/scratch/gumstix-buildroot/toolchain_build_arm_nofpu/binutils-2.17.50.0.6-build/binutils/objdump]
> Error 2
> 
> 
> Thanks for any help that you can provide.
> 

-- 
View this message in context: http://old.nabble.com/Problem-making-buildroot-tp24075410p29964713.html
Sent from the BuildRoot mailing list archive at Nabble.com.