Hi,

Stefan Wahren <stefan.wahren@i2se.com> writes:
> Hi Felipe,
>
> Am 22.11.2016 um 13:23 schrieb Felipe Balbi:
>> Hi,
>>
>> Stefan Wahren <stefan.wahren@i2se.com> writes:
>>> Since there is no parameter @value replace it with @legacy.
>>>
>>> Fixes: 05ee799f202 ("usb: dwc2: Move gadget settings into core_params")
>>> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
>>> ---
>>>  drivers/usb/dwc2/params.c |    2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
>>> index 11fe68a..10407cb 100644
>>> --- a/drivers/usb/dwc2/params.c
>>> +++ b/drivers/usb/dwc2/params.c
>>> @@ -320,7 +320,7 @@ static void dwc2_set_core_param(void *param, u8 size, u64 value)
>>>   * @size: The size of the core parameter in bytes, or 0 for bool.
>>>   *
>>>   * This function looks up @property and sets the @param to that value.
>>> - * If the property doesn't exist it uses the passed-in @value. It will
>>> + * If the property doesn't exist it uses the passed-in @legacy value. It will
>> This doesn't fix any bugs. 
>
> you are right. I found this documentation bug while fixing the issues
> before.
>
> Since this is the last patch of the series, you could ignore it. And i
> resend it without fixes tag after the merge window.

fine by me :-)

>> Also, is @legacy a parameter?
>>
>
> |/** * dwc2_set_param() - Set a core parameter * * @hsotg: Programming
> view of the DWC_otg controller * @param: Pointer to the parameter to set
> * @lookup: True if the property should be looked up * @property: The
> device property to read * @legacy: The param value to set if @property
> is not available. This * will typically be the legacy value set in the
> static * params structure. * @def: The default value * @min: The minimum
> value * @max: The maximum value * @size: The size of the core parameter
> in bytes, or 0 for bool. * * This function looks up @property and sets
> the @param to that value. * If the property doesn't exist it uses the
> passed-in @value. It will * verify that the value falls between @min and
> @max. If it doesn't, * it will output an error and set the parameter to
> either @def or, * failing that, to @min. * * The @size is used to write
> to @param and to query the device * properties so that this same
> function can be used with different * types of parameters. */ static
> void dwc2_set_param(struct dwc2_hsotg *hsotg, void *param, bool lookup,
> char *property, u64 legacy, u64 def, u64 min, u64 max, u8 size)|

heh, a little difficult to read, but got your point ;-) thanks

-- 
balbi