All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Mark Brown <broonie@kernel.org>
Cc: Linux-ALSA <alsa-devel@alsa-project.org>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [alsa-devel] [PATCH 06/21] ASoC: soc-core: call soc_bind_dai_link() under snd_soc_add_dai_link()
Date: 09 Oct 2019 13:30:14 +0900	[thread overview]
Message-ID: <87k19eilrd.wl-kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <87sgo2ilso.wl-kuninori.morimoto.gx@renesas.com>

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

If we focus to soc_bind_dai_link() at snd_soc_instantiate_card(),
we will notice very complex operation.

static int snd_soc_instantiate_card(...)
{
	...
	/*
	 * (1) find component via card pre-linked dai_link
	 *
	 * find component (CPU/Codec/Platform) via card pre-linked
	 * dai_link, and connect found component to *rtd*.
	 * for_each_card_prelinks() is dai_link loop for card pre-linked
	 */
	for_each_card_prelinks(card, i, dai_link) {
		ret = soc_bind_dai_link(card, dai_link);
		...
	}
	...
	/*
	 * (2) connect card pre-linked dai_link to card list
	 *
	 * connect all card pre-linked dai_link to *card list*.
	 */
	for_each_card_prelinks(card, i, dai_link) {
		ret = snd_soc_add_dai_link(card, dai_link);
		...
	}
	...
	/*
	 * (3) probe binded component
	 *
	 * probe *rtd* connected component. This means, connected
	 * component at (1) is the probe target.
	 *
	 * At this component probe, topology may add new dai_link to
	 * *card list* by using snd_soc_add_dai_link() which is
	 * used at (2).
	 */
	ret = soc_probe_link_components(card);
	...

	/*
	 * (4) find component again
	 *
	 * find component again. card pre-linked dai_link listed components
	 * are already found at (1), but topology added one via (3) is not
	 * yet found. Here try to find component for it.
	 *
	 * for_each_card_links() here means *card list* loop,
	 * which is connected via (2) and (3).
	 * It ignores already added one, this means it ignores component
	 * which is connected at (1).
	 * Thus, find target here is new added one at (3).
	 */
	for_each_card_links(card, dai_link) {
		ret = soc_bind_dai_link(card, dai_link);
		...
	}
	...
}

It is doing very complex method.
The problem is finding component for "card pre-linked" (= (1)) and
"topology added dai_link" (= (3)) are separated.
If we can "find component" when dai_link is connected to "card list",
the code will be very simple. This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 sound/soc/soc-core.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 4edac93..a0c80f7 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1409,6 +1409,8 @@ EXPORT_SYMBOL_GPL(snd_soc_disconnect_sync);
 int snd_soc_add_dai_link(struct snd_soc_card *card,
 		struct snd_soc_dai_link *dai_link)
 {
+	int ret;
+
 	if (dai_link->dobj.type
 	    && dai_link->dobj.type != SND_SOC_DOBJ_DAI_LINK) {
 		dev_err(card->dev, "Invalid dai link type %d\n",
@@ -1424,6 +1426,10 @@ int snd_soc_add_dai_link(struct snd_soc_card *card,
 	if (dai_link->dobj.type && card->add_dai_link)
 		card->add_dai_link(card, dai_link);
 
+	ret = soc_bind_dai_link(card, dai_link);
+	if (ret < 0)
+		return ret;
+
 	/* see for_each_card_links */
 	list_add_tail(&dai_link->list, &card->dai_link_list);
 
@@ -1996,13 +2002,6 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card)
 	/* check whether any platform is ignore machine FE and using topology */
 	soc_check_tplg_fes(card);
 
-	/* bind DAIs */
-	for_each_card_prelinks(card, i, dai_link) {
-		ret = soc_bind_dai_link(card, dai_link);
-		if (ret != 0)
-			goto probe_end;
-	}
-
 	/* bind aux_devs too */
 	ret = soc_bind_aux_dev(card);
 	if (ret < 0)
@@ -2060,16 +2059,6 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card)
 	if (ret < 0)
 		goto probe_end;
 
-	/*
-	 * Find new DAI links added during probing components and bind them.
-	 * Components with topology may bring new DAIs and DAI links.
-	 */
-	for_each_card_links(card, dai_link) {
-		ret = soc_bind_dai_link(card, dai_link);
-		if (ret)
-			goto probe_end;
-	}
-
 	/* probe all DAI links on this card */
 	ret = soc_probe_link_dais(card);
 	if (ret < 0) {
-- 
2.7.4

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-10-09  4:34 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09  4:29 [alsa-devel] [PATCH 00/21] ASoC: soc-core cleanup - step 4 Kuninori Morimoto
2019-10-09  4:29 ` [alsa-devel] [PATCH 01/21] ASoC: soc-core: remove for_each_rtdcom_safe() Kuninori Morimoto
2019-10-09  4:29 ` [alsa-devel] [PATCH 02/21] ASoC: soc-core: add for_each_rtd_components() and replace Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 03/21] ASoC: soc-core: move soc_init_dai_link() Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 04/21] ASoC: soc-core: rename soc_init_dai_link() to soc_dai_link_sanity_check() Kuninori Morimoto
2019-10-10 14:17   ` Pierre-Louis Bossart
2019-10-11  1:19     ` Kuninori Morimoto
2019-10-11 13:38       ` Pierre-Louis Bossart
2019-10-09  4:30 ` [alsa-devel] [PATCH 05/21] ASoC: soc-core: remove duplicated soc_is_dai_link_bound() Kuninori Morimoto
2019-10-10 15:09   ` Pierre-Louis Bossart
2019-10-09  4:30 ` Kuninori Morimoto [this message]
2019-10-09  4:30 ` [alsa-devel] [PATCH 07/21] ASoC: soc-core: add soc_unbind_dai_link() Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 08/21] ASoC: soc-core: snd_soc_unbind_card() cleanup Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 09/21] ASoC: soc-core: remove unneeded snd_soc_tplg_component_remove() Kuninori Morimoto
2019-10-10 15:09   ` Pierre-Louis Bossart
2019-10-11  1:30     ` Kuninori Morimoto
2019-10-11 13:40       ` Pierre-Louis Bossart
2019-10-09  4:30 ` [alsa-devel] [PATCH 10/21] ASoC: soc-core: move snd_soc_lookup_component() Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 11/21] ASoC: soc-core: add snd_soc_del_component() Kuninori Morimoto
2019-10-10 15:16   ` Pierre-Louis Bossart
2019-10-11  1:35     ` Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 12/21] ASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component() Kuninori Morimoto
2019-10-10 15:19   ` Pierre-Louis Bossart
2019-10-11  1:38     ` Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 13/21] ASoC: soc-core: move snd_soc_register_dai() Kuninori Morimoto
2019-10-09  4:30 ` [alsa-devel] [PATCH 14/21] ASoC: soc-core: have legacy_dai_naming at snd_soc_register_dai() Kuninori Morimoto
2019-10-10 15:26   ` Pierre-Louis Bossart
2019-10-11  1:07     ` Kuninori Morimoto
2019-10-11 13:43       ` Pierre-Louis Bossart
2019-10-09  4:30 ` [alsa-devel] [PATCH 15/21] ASoC: soc-core: move snd_soc_unregister_dais() Kuninori Morimoto
2019-10-09  4:31 ` [alsa-devel] [PATCH 16/21] ASoC: soc-core: add snd_soc_unregister_dai() Kuninori Morimoto
2019-10-09  4:31 ` [alsa-devel] [PATCH 17/21] ASoC: soc-core: don't call snd_soc_dapm_new_dai_widgets() at snd_soc_register_dai() Kuninori Morimoto
2019-10-09  4:31 ` [alsa-devel] [PATCH 18/21] ASoC: soc-core: use mutex_lock() at snd_soc_add_component() Kuninori Morimoto
2019-10-10 15:29   ` Pierre-Louis Bossart
2019-10-09  4:31 ` [alsa-devel] [PATCH 19/21] ASoC: soc-core: call snd_soc_register_dai() from snd_soc_register_dais() Kuninori Morimoto
2019-10-10 15:34   ` Pierre-Louis Bossart
2019-10-11  1:44     ` Kuninori Morimoto
2019-10-09  4:31 ` [alsa-devel] [PATCH 20/21] ASoC: soc-core: remove topology specific operation Kuninori Morimoto
2019-10-09  4:31 ` [alsa-devel] [PATCH 21/21] ASoC: soc.h: dobj is used only when SND_SOC_TOPOLOGY Kuninori Morimoto
2019-10-09 14:16 ` [alsa-devel] [PATCH 00/21] ASoC: soc-core cleanup - step 4 Pierre-Louis Bossart
2019-10-10 15:38 ` Pierre-Louis Bossart
2019-10-11  1:53   ` Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87k19eilrd.wl-kuninori.morimoto.gx@renesas.com \
    --to=kuninori.morimoto.gx@renesas.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.