* [bpf-next v3 0/9] bpf: Add helper to do FIB lookups
@ 2018-05-10 3:34 David Ahern
2018-05-10 3:34 ` [bpf-next v3 1/9] net/ipv6: Rename fib6_lookup to fib6_node_lookup David Ahern
` (9 more replies)
0 siblings, 10 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet is expected to continue up the stack
for full processing.
The response from a FIB and neighbor lookup is either the egress index
with the bpf_fib_lookup struct filled in with dmac and gateway or
0 meaning the packet should continue up the stack. In time we can
revisit this to return the FIB lookup result errno if it is one of the
special RTN_'s such as RTN_BLACKHOLE (-EINVAL) so that the XDP
programs can do an early drop if desired.
Patches 1-6 do some more refactoring to IPv6 with the end goal of
extracting a FIB lookup function that aligns with fib_lookup for IPv4,
basically returning a fib6_info without creating a dst based entry.
Patch 7 adds lookup functions to the ipv6 stub. These are needed since
bpf is built into the kernel and ipv6 may not be built or loaded.
Patch 8 adds the bpf helper and 9 adds a sample program.
v3
- remove ETH_ALEN and in6_addr from uapi header
v2
- removed pkt_access from bpf_func_proto as noticed by Daniel
- added check in that IPv6 forwarding is enabled
- added DaveM's ack on patches 1-7 and 9 based on v1 response and
fact that no changes were made to them in v2
v1
- updated commit messages and cover letter
- added comment to sample program noting lack of verification on
egress device supporting XDP
RFC v2
- fixed use of foward helper from cls_act as noted by Daniel
- in patch 1 rename fib6_lookup_1 as well for consistency
David Ahern (9):
net/ipv6: Rename fib6_lookup to fib6_node_lookup
net/ipv6: Rename rt6_multipath_select
net/ipv6: Extract table lookup from ip6_pol_route
net/ipv6: Refactor fib6_rule_action
net/ipv6: Add fib6_lookup
net/ipv6: Update fib6 tracepoint to take fib6_info
net/ipv6: Add fib lookup stubs for use in bpf helper
bpf: Provide helper to do forwarding lookups in kernel FIB table
samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP
include/net/addrconf.h | 14 ++
include/net/ip6_fib.h | 21 ++-
include/trace/events/fib6.h | 14 +-
include/uapi/linux/bpf.h | 81 ++++++++-
net/core/filter.c | 267 ++++++++++++++++++++++++++++++
net/ipv6/addrconf_core.c | 33 +++-
net/ipv6/af_inet6.c | 6 +-
net/ipv6/fib6_rules.c | 138 ++++++++++++---
net/ipv6/ip6_fib.c | 21 ++-
net/ipv6/route.c | 76 +++++----
samples/bpf/Makefile | 4 +
samples/bpf/xdp_fwd_kern.c | 115 +++++++++++++
samples/bpf/xdp_fwd_user.c | 136 +++++++++++++++
tools/testing/selftests/bpf/bpf_helpers.h | 3 +
14 files changed, 854 insertions(+), 75 deletions(-)
create mode 100644 samples/bpf/xdp_fwd_kern.c
create mode 100644 samples/bpf/xdp_fwd_user.c
--
2.11.0
^ permalink raw reply [flat|nested] 16+ messages in thread
* [bpf-next v3 1/9] net/ipv6: Rename fib6_lookup to fib6_node_lookup
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 2/9] net/ipv6: Rename rt6_multipath_select David Ahern
` (8 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Rename fib6_lookup to fib6_node_lookup to better reflect what it
returns. The fib6_lookup name will be used in a later patch for
an IPv6 equivalent to IPv4's fib_lookup.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
include/net/ip6_fib.h | 6 +++---
net/ipv6/ip6_fib.c | 14 ++++++++------
net/ipv6/route.c | 8 ++++----
3 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index a3ec08d05756..43ab545e64ea 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -376,9 +376,9 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
const struct sk_buff *skb,
int flags, pol_lookup_t lookup);
-struct fib6_node *fib6_lookup(struct fib6_node *root,
- const struct in6_addr *daddr,
- const struct in6_addr *saddr);
+struct fib6_node *fib6_node_lookup(struct fib6_node *root,
+ const struct in6_addr *daddr,
+ const struct in6_addr *saddr);
struct fib6_node *fib6_locate(struct fib6_node *root,
const struct in6_addr *daddr, int dst_len,
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index f0a4262a4789..487faffeae28 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1354,8 +1354,8 @@ struct lookup_args {
const struct in6_addr *addr; /* search key */
};
-static struct fib6_node *fib6_lookup_1(struct fib6_node *root,
- struct lookup_args *args)
+static struct fib6_node *fib6_node_lookup_1(struct fib6_node *root,
+ struct lookup_args *args)
{
struct fib6_node *fn;
__be32 dir;
@@ -1400,7 +1400,8 @@ static struct fib6_node *fib6_lookup_1(struct fib6_node *root,
#ifdef CONFIG_IPV6_SUBTREES
if (subtree) {
struct fib6_node *sfn;
- sfn = fib6_lookup_1(subtree, args + 1);
+ sfn = fib6_node_lookup_1(subtree,
+ args + 1);
if (!sfn)
goto backtrack;
fn = sfn;
@@ -1422,8 +1423,9 @@ static struct fib6_node *fib6_lookup_1(struct fib6_node *root,
/* called with rcu_read_lock() held
*/
-struct fib6_node *fib6_lookup(struct fib6_node *root, const struct in6_addr *daddr,
- const struct in6_addr *saddr)
+struct fib6_node *fib6_node_lookup(struct fib6_node *root,
+ const struct in6_addr *daddr,
+ const struct in6_addr *saddr)
{
struct fib6_node *fn;
struct lookup_args args[] = {
@@ -1442,7 +1444,7 @@ struct fib6_node *fib6_lookup(struct fib6_node *root, const struct in6_addr *dad
}
};
- fn = fib6_lookup_1(root, daddr ? args : args + 1);
+ fn = fib6_node_lookup_1(root, daddr ? args : args + 1);
if (!fn || fn->fn_flags & RTN_TL_ROOT)
fn = root;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index daa3662da0ee..443d2a0bc150 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1006,7 +1006,7 @@ static struct fib6_node* fib6_backtrack(struct fib6_node *fn,
pn = rcu_dereference(fn->parent);
sn = FIB6_SUBTREE(pn);
if (sn && sn != fn)
- fn = fib6_lookup(sn, NULL, saddr);
+ fn = fib6_node_lookup(sn, NULL, saddr);
else
fn = pn;
if (fn->fn_flags & RTN_RTINFO)
@@ -1059,7 +1059,7 @@ static struct rt6_info *ip6_pol_route_lookup(struct net *net,
flags &= ~RT6_LOOKUP_F_IFACE;
rcu_read_lock();
- fn = fib6_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
+ fn = fib6_node_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
restart:
f6i = rcu_dereference(fn->leaf);
if (!f6i) {
@@ -1815,7 +1815,7 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
rcu_read_lock();
- fn = fib6_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
+ fn = fib6_node_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
saved_fn = fn;
if (fl6->flowi6_flags & FLOWI_FLAG_SKIP_NH_OIF)
@@ -2425,7 +2425,7 @@ static struct rt6_info *__ip6_route_redirect(struct net *net,
*/
rcu_read_lock();
- fn = fib6_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
+ fn = fib6_node_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
restart:
for_each_fib6_node_rt_rcu(fn) {
if (rt->fib6_nh.nh_flags & RTNH_F_DEAD)
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 2/9] net/ipv6: Rename rt6_multipath_select
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
2018-05-10 3:34 ` [bpf-next v3 1/9] net/ipv6: Rename fib6_lookup to fib6_node_lookup David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 3/9] net/ipv6: Extract table lookup from ip6_pol_route David Ahern
` (7 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Rename rt6_multipath_select to fib6_multipath_select and export it.
A later patch wants access to it similar to IPv4's fib_select_path.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
include/net/ip6_fib.h | 5 +++++
net/ipv6/route.c | 17 +++++++++--------
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 43ab545e64ea..2597d8fdd92f 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -376,6 +376,11 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
const struct sk_buff *skb,
int flags, pol_lookup_t lookup);
+struct fib6_info *fib6_multipath_select(const struct net *net,
+ struct fib6_info *match,
+ struct flowi6 *fl6, int oif,
+ const struct sk_buff *skb, int strict);
+
struct fib6_node *fib6_node_lookup(struct fib6_node *root,
const struct in6_addr *daddr,
const struct in6_addr *saddr);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 443d2a0bc150..6a10608d9025 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -419,11 +419,11 @@ static bool rt6_check_expired(const struct rt6_info *rt)
return false;
}
-static struct fib6_info *rt6_multipath_select(const struct net *net,
- struct fib6_info *match,
- struct flowi6 *fl6, int oif,
- const struct sk_buff *skb,
- int strict)
+struct fib6_info *fib6_multipath_select(const struct net *net,
+ struct fib6_info *match,
+ struct flowi6 *fl6, int oif,
+ const struct sk_buff *skb,
+ int strict)
{
struct fib6_info *sibling, *next_sibling;
@@ -1068,8 +1068,9 @@ static struct rt6_info *ip6_pol_route_lookup(struct net *net,
f6i = rt6_device_match(net, f6i, &fl6->saddr,
fl6->flowi6_oif, flags);
if (f6i->fib6_nsiblings && fl6->flowi6_oif == 0)
- f6i = rt6_multipath_select(net, f6i, fl6,
- fl6->flowi6_oif, skb, flags);
+ f6i = fib6_multipath_select(net, f6i, fl6,
+ fl6->flowi6_oif, skb,
+ flags);
}
if (f6i == net->ipv6.fib6_null_entry) {
fn = fib6_backtrack(fn, &fl6->saddr);
@@ -1824,7 +1825,7 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
redo_rt6_select:
f6i = rt6_select(net, fn, oif, strict);
if (f6i->fib6_nsiblings)
- f6i = rt6_multipath_select(net, f6i, fl6, oif, skb, strict);
+ f6i = fib6_multipath_select(net, f6i, fl6, oif, skb, strict);
if (f6i == net->ipv6.fib6_null_entry) {
fn = fib6_backtrack(fn, &fl6->saddr);
if (fn)
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 3/9] net/ipv6: Extract table lookup from ip6_pol_route
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
2018-05-10 3:34 ` [bpf-next v3 1/9] net/ipv6: Rename fib6_lookup to fib6_node_lookup David Ahern
2018-05-10 3:34 ` [bpf-next v3 2/9] net/ipv6: Rename rt6_multipath_select David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 4/9] net/ipv6: Refactor fib6_rule_action David Ahern
` (6 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
ip6_pol_route is used for ingress and egress FIB lookups. Refactor it
moving the table lookup into a separate fib6_table_lookup that can be
invoked separately and export the new function.
ip6_pol_route now calls fib6_table_lookup and uses the result to generate
a dst based rt6_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
include/net/ip6_fib.h | 4 ++++
net/ipv6/route.c | 39 +++++++++++++++++++++++++--------------
2 files changed, 29 insertions(+), 14 deletions(-)
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 2597d8fdd92f..c70705f2647a 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -376,6 +376,10 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
const struct sk_buff *skb,
int flags, pol_lookup_t lookup);
+/* called with rcu lock held; caller needs to select path */
+struct fib6_info *fib6_table_lookup(struct net *net, struct fib6_table *table,
+ int oif, struct flowi6 *fl6, int strict);
+
struct fib6_info *fib6_multipath_select(const struct net *net,
struct fib6_info *match,
struct flowi6 *fl6, int oif,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 6a10608d9025..019d8ba9021e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1800,21 +1800,12 @@ void rt6_age_exceptions(struct fib6_info *rt,
rcu_read_unlock_bh();
}
-struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
- int oif, struct flowi6 *fl6,
- const struct sk_buff *skb, int flags)
+/* must be called with rcu lock held */
+struct fib6_info *fib6_table_lookup(struct net *net, struct fib6_table *table,
+ int oif, struct flowi6 *fl6, int strict)
{
struct fib6_node *fn, *saved_fn;
struct fib6_info *f6i;
- struct rt6_info *rt;
- int strict = 0;
-
- strict |= flags & RT6_LOOKUP_F_IFACE;
- strict |= flags & RT6_LOOKUP_F_IGNORE_LINKSTATE;
- if (net->ipv6.devconf_all->forwarding == 0)
- strict |= RT6_LOOKUP_F_REACHABLE;
-
- rcu_read_lock();
fn = fib6_node_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
saved_fn = fn;
@@ -1824,8 +1815,6 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
redo_rt6_select:
f6i = rt6_select(net, fn, oif, strict);
- if (f6i->fib6_nsiblings)
- f6i = fib6_multipath_select(net, f6i, fl6, oif, skb, strict);
if (f6i == net->ipv6.fib6_null_entry) {
fn = fib6_backtrack(fn, &fl6->saddr);
if (fn)
@@ -1838,6 +1827,28 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
}
}
+ return f6i;
+}
+
+struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
+ int oif, struct flowi6 *fl6,
+ const struct sk_buff *skb, int flags)
+{
+ struct fib6_info *f6i;
+ struct rt6_info *rt;
+ int strict = 0;
+
+ strict |= flags & RT6_LOOKUP_F_IFACE;
+ strict |= flags & RT6_LOOKUP_F_IGNORE_LINKSTATE;
+ if (net->ipv6.devconf_all->forwarding == 0)
+ strict |= RT6_LOOKUP_F_REACHABLE;
+
+ rcu_read_lock();
+
+ f6i = fib6_table_lookup(net, table, oif, fl6, strict);
+ if (f6i->fib6_nsiblings)
+ f6i = fib6_multipath_select(net, f6i, fl6, oif, skb, strict);
+
if (f6i == net->ipv6.fib6_null_entry) {
rt = net->ipv6.ip6_null_entry;
rcu_read_unlock();
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 4/9] net/ipv6: Refactor fib6_rule_action
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (2 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 3/9] net/ipv6: Extract table lookup from ip6_pol_route David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 5/9] net/ipv6: Add fib6_lookup David Ahern
` (5 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Move source address lookup from fib6_rule_action to a helper. It will be
used in a later patch by a second variant for fib6_rule_action.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
net/ipv6/fib6_rules.c | 52 ++++++++++++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 6547fc6491a6..d040c4bff3a0 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -96,6 +96,31 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
return &net->ipv6.ip6_null_entry->dst;
}
+static int fib6_rule_saddr(struct net *net, struct fib_rule *rule, int flags,
+ struct flowi6 *flp6, const struct net_device *dev)
+{
+ struct fib6_rule *r = (struct fib6_rule *)rule;
+
+ /* If we need to find a source address for this traffic,
+ * we check the result if it meets requirement of the rule.
+ */
+ if ((rule->flags & FIB_RULE_FIND_SADDR) &&
+ r->src.plen && !(flags & RT6_LOOKUP_F_HAS_SADDR)) {
+ struct in6_addr saddr;
+
+ if (ipv6_dev_get_saddr(net, dev, &flp6->daddr,
+ rt6_flags2srcprefs(flags), &saddr))
+ return -EAGAIN;
+
+ if (!ipv6_prefix_equal(&saddr, &r->src.addr, r->src.plen))
+ return -EAGAIN;
+
+ flp6->saddr = saddr;
+ }
+
+ return 0;
+}
+
static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
int flags, struct fib_lookup_arg *arg)
{
@@ -134,27 +159,12 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
rt = lookup(net, table, flp6, arg->lookup_data, flags);
if (rt != net->ipv6.ip6_null_entry) {
- struct fib6_rule *r = (struct fib6_rule *)rule;
-
- /*
- * If we need to find a source address for this traffic,
- * we check the result if it meets requirement of the rule.
- */
- if ((rule->flags & FIB_RULE_FIND_SADDR) &&
- r->src.plen && !(flags & RT6_LOOKUP_F_HAS_SADDR)) {
- struct in6_addr saddr;
-
- if (ipv6_dev_get_saddr(net,
- ip6_dst_idev(&rt->dst)->dev,
- &flp6->daddr,
- rt6_flags2srcprefs(flags),
- &saddr))
- goto again;
- if (!ipv6_prefix_equal(&saddr, &r->src.addr,
- r->src.plen))
- goto again;
- flp6->saddr = saddr;
- }
+ err = fib6_rule_saddr(net, rule, flags, flp6,
+ ip6_dst_idev(&rt->dst)->dev);
+
+ if (err == -EAGAIN)
+ goto again;
+
err = rt->dst.error;
if (err != -EAGAIN)
goto out;
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 5/9] net/ipv6: Add fib6_lookup
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (3 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 4/9] net/ipv6: Refactor fib6_rule_action David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 6/9] net/ipv6: Update fib6 tracepoint to take fib6_info David Ahern
` (4 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Add IPv6 equivalent to fib_lookup. Does a fib lookup, including rules,
but returns a FIB entry, fib6_info, rather than a dst based rt6_info.
fib6_lookup is any where from 140% (MULTIPLE_TABLES config disabled)
to 60% faster than any of the dst based lookup methods (without custom
rules) and 25% faster with custom rules (e.g., l3mdev rule).
Since the lookup function has a completely different signature,
fib6_rule_action is split into 2 paths: the existing one is
renamed __fib6_rule_action and a new one for the fib6_info path
is added. fib6_rule_action decides which to call based on the
lookup_ptr. If it is fib6_table_lookup then the new path is taken.
Caller must hold rcu lock as no reference is taken on the returned
fib entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
include/net/ip6_fib.h | 6 ++++
net/ipv6/fib6_rules.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++--
net/ipv6/ip6_fib.c | 7 +++++
3 files changed, 97 insertions(+), 2 deletions(-)
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index c70705f2647a..cc70f6da8462 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -376,6 +376,12 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
const struct sk_buff *skb,
int flags, pol_lookup_t lookup);
+/* called with rcu lock held; can return error pointer
+ * caller needs to select path
+ */
+struct fib6_info *fib6_lookup(struct net *net, int oif, struct flowi6 *fl6,
+ int flags);
+
/* called with rcu lock held; caller needs to select path */
struct fib6_info *fib6_table_lookup(struct net *net, struct fib6_table *table,
int oif, struct flowi6 *fl6, int strict);
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index d040c4bff3a0..f590446595d8 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -60,6 +60,39 @@ unsigned int fib6_rules_seq_read(struct net *net)
return fib_rules_seq_read(net, AF_INET6);
}
+/* called with rcu lock held; no reference taken on fib6_info */
+struct fib6_info *fib6_lookup(struct net *net, int oif, struct flowi6 *fl6,
+ int flags)
+{
+ struct fib6_info *f6i;
+ int err;
+
+ if (net->ipv6.fib6_has_custom_rules) {
+ struct fib_lookup_arg arg = {
+ .lookup_ptr = fib6_table_lookup,
+ .lookup_data = &oif,
+ .flags = FIB_LOOKUP_NOREF,
+ };
+
+ l3mdev_update_flow(net, flowi6_to_flowi(fl6));
+
+ err = fib_rules_lookup(net->ipv6.fib6_rules_ops,
+ flowi6_to_flowi(fl6), flags, &arg);
+ if (err)
+ return ERR_PTR(err);
+
+ f6i = arg.result ? : net->ipv6.fib6_null_entry;
+ } else {
+ f6i = fib6_table_lookup(net, net->ipv6.fib6_local_tbl,
+ oif, fl6, flags);
+ if (!f6i || f6i == net->ipv6.fib6_null_entry)
+ f6i = fib6_table_lookup(net, net->ipv6.fib6_main_tbl,
+ oif, fl6, flags);
+ }
+
+ return f6i;
+}
+
struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
const struct sk_buff *skb,
int flags, pol_lookup_t lookup)
@@ -121,8 +154,48 @@ static int fib6_rule_saddr(struct net *net, struct fib_rule *rule, int flags,
return 0;
}
-static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
- int flags, struct fib_lookup_arg *arg)
+static int fib6_rule_action_alt(struct fib_rule *rule, struct flowi *flp,
+ int flags, struct fib_lookup_arg *arg)
+{
+ struct flowi6 *flp6 = &flp->u.ip6;
+ struct net *net = rule->fr_net;
+ struct fib6_table *table;
+ struct fib6_info *f6i;
+ int err = -EAGAIN, *oif;
+ u32 tb_id;
+
+ switch (rule->action) {
+ case FR_ACT_TO_TBL:
+ break;
+ case FR_ACT_UNREACHABLE:
+ return -ENETUNREACH;
+ case FR_ACT_PROHIBIT:
+ return -EACCES;
+ case FR_ACT_BLACKHOLE:
+ default:
+ return -EINVAL;
+ }
+
+ tb_id = fib_rule_get_table(rule, arg);
+ table = fib6_get_table(net, tb_id);
+ if (!table)
+ return -EAGAIN;
+
+ oif = (int *)arg->lookup_data;
+ f6i = fib6_table_lookup(net, table, *oif, flp6, flags);
+ if (f6i != net->ipv6.fib6_null_entry) {
+ err = fib6_rule_saddr(net, rule, flags, flp6,
+ fib6_info_nh_dev(f6i));
+
+ if (likely(!err))
+ arg->result = f6i;
+ }
+
+ return err;
+}
+
+static int __fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
+ int flags, struct fib_lookup_arg *arg)
{
struct flowi6 *flp6 = &flp->u.ip6;
struct rt6_info *rt = NULL;
@@ -182,6 +255,15 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
return err;
}
+static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
+ int flags, struct fib_lookup_arg *arg)
+{
+ if (arg->lookup_ptr == fib6_table_lookup)
+ return fib6_rule_action_alt(rule, flp, flags, arg);
+
+ return __fib6_rule_action(rule, flp, flags, arg);
+}
+
static bool fib6_rule_suppress(struct fib_rule *rule, struct fib_lookup_arg *arg)
{
struct rt6_info *rt = (struct rt6_info *) arg->result;
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 487faffeae28..d1dc6017f5a6 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -354,6 +354,13 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
return &rt->dst;
}
+/* called with rcu lock held; no reference taken on fib6_info */
+struct fib6_info *fib6_lookup(struct net *net, int oif, struct flowi6 *fl6,
+ int flags)
+{
+ return fib6_table_lookup(net, net->ipv6.fib6_main_tbl, oif, fl6, flags);
+}
+
static void __net_init fib6_tables_init(struct net *net)
{
fib6_link_table(net, net->ipv6.fib6_main_tbl);
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 6/9] net/ipv6: Update fib6 tracepoint to take fib6_info
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (4 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 5/9] net/ipv6: Add fib6_lookup David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 7/9] net/ipv6: Add fib lookup stubs for use in bpf helper David Ahern
` (3 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Similar to IPv4, IPv6 should use the FIB lookup result in the
tracepoint.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
include/trace/events/fib6.h | 14 +++++++-------
net/ipv6/route.c | 14 ++++++--------
2 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/include/trace/events/fib6.h b/include/trace/events/fib6.h
index 7e8d48a81b91..1b8d951e3c12 100644
--- a/include/trace/events/fib6.h
+++ b/include/trace/events/fib6.h
@@ -12,10 +12,10 @@
TRACE_EVENT(fib6_table_lookup,
- TP_PROTO(const struct net *net, const struct rt6_info *rt,
+ TP_PROTO(const struct net *net, const struct fib6_info *f6i,
struct fib6_table *table, const struct flowi6 *flp),
- TP_ARGS(net, rt, table, flp),
+ TP_ARGS(net, f6i, table, flp),
TP_STRUCT__entry(
__field( u32, tb_id )
@@ -48,20 +48,20 @@ TRACE_EVENT(fib6_table_lookup,
in6 = (struct in6_addr *)__entry->dst;
*in6 = flp->daddr;
- if (rt->rt6i_idev) {
- __assign_str(name, rt->rt6i_idev->dev->name);
+ if (f6i->fib6_nh.nh_dev) {
+ __assign_str(name, f6i->fib6_nh.nh_dev);
} else {
__assign_str(name, "");
}
- if (rt == net->ipv6.ip6_null_entry) {
+ if (f6i == net->ipv6.fib6_null_entry) {
struct in6_addr in6_zero = {};
in6 = (struct in6_addr *)__entry->gw;
*in6 = in6_zero;
- } else if (rt) {
+ } else if (f6i) {
in6 = (struct in6_addr *)__entry->gw;
- *in6 = rt->rt6i_gateway;
+ *in6 = f6i->fib6_nh.nh_gw;
}
),
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 019d8ba9021e..73f9c29a5878 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1078,6 +1078,8 @@ static struct rt6_info *ip6_pol_route_lookup(struct net *net,
goto restart;
}
+ trace_fib6_table_lookup(net, f6i, table, fl6);
+
/* Search through exception table */
rt = rt6_find_cached_rt(f6i, &fl6->daddr, &fl6->saddr);
if (rt) {
@@ -1096,8 +1098,6 @@ static struct rt6_info *ip6_pol_route_lookup(struct net *net,
rcu_read_unlock();
- trace_fib6_table_lookup(net, rt, table, fl6);
-
return rt;
}
@@ -1827,6 +1827,8 @@ struct fib6_info *fib6_table_lookup(struct net *net, struct fib6_table *table,
}
}
+ trace_fib6_table_lookup(net, f6i, table, fl6);
+
return f6i;
}
@@ -1853,7 +1855,6 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
rt = net->ipv6.ip6_null_entry;
rcu_read_unlock();
dst_hold(&rt->dst);
- trace_fib6_table_lookup(net, rt, table, fl6);
return rt;
}
@@ -1864,7 +1865,6 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
dst_use_noref(&rt->dst, jiffies);
rcu_read_unlock();
- trace_fib6_table_lookup(net, rt, table, fl6);
return rt;
} else if (unlikely((fl6->flowi6_flags & FLOWI_FLAG_KNOWN_NH) &&
!(f6i->fib6_flags & RTF_GATEWAY))) {
@@ -1890,9 +1890,7 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
dst_hold(&uncached_rt->dst);
}
- trace_fib6_table_lookup(net, uncached_rt, table, fl6);
return uncached_rt;
-
} else {
/* Get a percpu copy */
@@ -1906,7 +1904,7 @@ struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
local_bh_enable();
rcu_read_unlock();
- trace_fib6_table_lookup(net, pcpu_rt, table, fl6);
+
return pcpu_rt;
}
}
@@ -2491,7 +2489,7 @@ static struct rt6_info *__ip6_route_redirect(struct net *net,
rcu_read_unlock();
- trace_fib6_table_lookup(net, ret, table, fl6);
+ trace_fib6_table_lookup(net, rt, table, fl6);
return ret;
};
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 7/9] net/ipv6: Add fib lookup stubs for use in bpf helper
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (5 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 6/9] net/ipv6: Update fib6 tracepoint to take fib6_info David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table David Ahern
` (2 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Add stubs to retrieve a handle to an IPv6 FIB table, fib6_get_table,
a stub to do a lookup in a specific table, fib6_table_lookup, and
a stub for a full route lookup.
The stubs are needed for core bpf code to handle the case when the
IPv6 module is not builtin.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
include/net/addrconf.h | 14 ++++++++++++++
net/ipv6/addrconf_core.c | 33 ++++++++++++++++++++++++++++++++-
net/ipv6/af_inet6.c | 6 +++++-
3 files changed, 51 insertions(+), 2 deletions(-)
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 8312cc25a3af..ff766ab207e0 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -223,6 +223,20 @@ struct ipv6_stub {
const struct in6_addr *addr);
int (*ipv6_dst_lookup)(struct net *net, struct sock *sk,
struct dst_entry **dst, struct flowi6 *fl6);
+
+ struct fib6_table *(*fib6_get_table)(struct net *net, u32 id);
+ struct fib6_info *(*fib6_lookup)(struct net *net, int oif,
+ struct flowi6 *fl6, int flags);
+ struct fib6_info *(*fib6_table_lookup)(struct net *net,
+ struct fib6_table *table,
+ int oif, struct flowi6 *fl6,
+ int flags);
+ struct fib6_info *(*fib6_multipath_select)(const struct net *net,
+ struct fib6_info *f6i,
+ struct flowi6 *fl6, int oif,
+ const struct sk_buff *skb,
+ int strict);
+
void (*udpv6_encap_enable)(void);
void (*ndisc_send_na)(struct net_device *dev, const struct in6_addr *daddr,
const struct in6_addr *solicited_addr,
diff --git a/net/ipv6/addrconf_core.c b/net/ipv6/addrconf_core.c
index 32b564dfd02a..2fe754fd4f5e 100644
--- a/net/ipv6/addrconf_core.c
+++ b/net/ipv6/addrconf_core.c
@@ -134,8 +134,39 @@ static int eafnosupport_ipv6_dst_lookup(struct net *net, struct sock *u1,
return -EAFNOSUPPORT;
}
+static struct fib6_table *eafnosupport_fib6_get_table(struct net *net, u32 id)
+{
+ return NULL;
+}
+
+static struct fib6_info *
+eafnosupport_fib6_table_lookup(struct net *net, struct fib6_table *table,
+ int oif, struct flowi6 *fl6, int flags)
+{
+ return NULL;
+}
+
+static struct fib6_info *
+eafnosupport_fib6_lookup(struct net *net, int oif, struct flowi6 *fl6,
+ int flags)
+{
+ return NULL;
+}
+
+static struct fib6_info *
+eafnosupport_fib6_multipath_select(const struct net *net, struct fib6_info *f6i,
+ struct flowi6 *fl6, int oif,
+ const struct sk_buff *skb, int strict)
+{
+ return f6i;
+}
+
const struct ipv6_stub *ipv6_stub __read_mostly = &(struct ipv6_stub) {
- .ipv6_dst_lookup = eafnosupport_ipv6_dst_lookup,
+ .ipv6_dst_lookup = eafnosupport_ipv6_dst_lookup,
+ .fib6_get_table = eafnosupport_fib6_get_table,
+ .fib6_table_lookup = eafnosupport_fib6_table_lookup,
+ .fib6_lookup = eafnosupport_fib6_lookup,
+ .fib6_multipath_select = eafnosupport_fib6_multipath_select,
};
EXPORT_SYMBOL_GPL(ipv6_stub);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index d0af96e0d109..50de8b0d4f70 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -889,7 +889,11 @@ static struct pernet_operations inet6_net_ops = {
static const struct ipv6_stub ipv6_stub_impl = {
.ipv6_sock_mc_join = ipv6_sock_mc_join,
.ipv6_sock_mc_drop = ipv6_sock_mc_drop,
- .ipv6_dst_lookup = ip6_dst_lookup,
+ .ipv6_dst_lookup = ip6_dst_lookup,
+ .fib6_get_table = fib6_get_table,
+ .fib6_table_lookup = fib6_table_lookup,
+ .fib6_lookup = fib6_lookup,
+ .fib6_multipath_select = fib6_multipath_select,
.udpv6_encap_enable = udpv6_encap_enable,
.ndisc_send_na = ndisc_send_na,
.nd_tbl = &nd_tbl,
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (6 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 7/9] net/ipv6: Add fib lookup stubs for use in bpf helper David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 7:31 ` Jesper Dangaard Brouer
2018-05-10 19:27 ` Mathieu Xhonneux
2018-05-10 3:34 ` [bpf-next v3 9/9] samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP David Ahern
2018-05-10 23:30 ` [bpf-next v3 0/9] bpf: Add helper to do FIB lookups Daniel Borkmann
9 siblings, 2 replies; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet continues up the stack.
If it is to be forwarded, the forwarding can be done directly if the
neighbor is already known. If the neighbor does not exist, the first
few packets go up the stack for neighbor resolution. Once resolved, the
xdp program provides the fast path.
On successful lookup the nexthop dmac, current device smac and egress
device index are returned.
The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
are implemented in this patch. The API includes layer 4 parameters if
the XDP program chooses to do deep packet inspection to allow compare
against ACLs implemented as FIB rules.
Header rewrite is left to the XDP program.
The lookup takes 2 flags:
- BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
straight to the table associated with the device (expert setting for
those looking to maximize throughput)
- BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
Default is an ingress lookup.
Initial performance numbers collected by Jesper, forwarded packets/sec:
Full stack XDP FIB lookup XDP Direct lookup
IPv4 1,947,969 7,074,156 7,415,333
IPv6 1,728,000 6,165,504 7,262,720
These number are single CPU core forwarding on a Broadwell
E5-1650 v4 @ 3.60GHz.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
include/uapi/linux/bpf.h | 81 +++++++++++++-
net/core/filter.c | 267 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 347 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index d615c777b573..02e4112510f8 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1828,6 +1828,33 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
+ *
+ * int bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
+ * Description
+ * Do FIB lookup in kernel tables using parameters in *params*.
+ * If lookup is successful and result shows packet is to be
+ * forwarded, the neighbor tables are searched for the nexthop.
+ * If successful (ie., FIB lookup shows forwarding and nexthop
+ * is resolved), the nexthop address is returned in ipv4_dst,
+ * ipv6_dst or mpls_out based on family, smac is set to mac
+ * address of egress device, dmac is set to nexthop mac address,
+ * rt_metric is set to metric from route.
+ *
+ * *plen* argument is the size of the passed in struct.
+ * *flags* argument can be one or more BPF_FIB_LOOKUP_ flags:
+ *
+ * **BPF_FIB_LOOKUP_DIRECT** means do a direct table lookup vs
+ * full lookup using FIB rules
+ * **BPF_FIB_LOOKUP_OUTPUT** means do lookup from an egress
+ * perspective (default is ingress)
+ *
+ * *ctx* is either **struct xdp_md** for XDP programs or
+ * **struct sk_buff** tc cls_act programs.
+ *
+ * Return
+ * Egress device index on success, 0 if packet needs to continue
+ * up the stack for further processing or a negative error in case
+ * of failure.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -1898,7 +1925,8 @@ union bpf_attr {
FN(xdp_adjust_tail), \
FN(skb_get_xfrm_state), \
FN(get_stack), \
- FN(skb_load_bytes_relative),
+ FN(skb_load_bytes_relative), \
+ FN(fib_lookup),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
@@ -2321,4 +2349,55 @@ struct bpf_raw_tracepoint_args {
__u64 args[0];
};
+/* DIRECT: Skip the FIB rules and go to FIB table associated with device
+ * OUTPUT: Do lookup from egress perspective; default is ingress
+ */
+#define BPF_FIB_LOOKUP_DIRECT BIT(0)
+#define BPF_FIB_LOOKUP_OUTPUT BIT(1)
+
+struct bpf_fib_lookup {
+ /* input */
+ __u8 family; /* network family, AF_INET, AF_INET6, AF_MPLS */
+
+ /* set if lookup is to consider L4 data - e.g., FIB rules */
+ __u8 l4_protocol;
+ __be16 sport;
+ __be16 dport;
+
+ /* total length of packet from network header - used for MTU check */
+ __u16 tot_len;
+ __u32 ifindex; /* L3 device index for lookup */
+
+ union {
+ /* inputs to lookup */
+ __u8 tos; /* AF_INET */
+ __be32 flowlabel; /* AF_INET6 */
+
+ /* output: metric of fib result */
+ __u32 rt_metric;
+ };
+
+ union {
+ __be32 mpls_in;
+ __be32 ipv4_src;
+ __u32 ipv6_src[4]; /* in6_addr; network order */
+ };
+
+ /* input to bpf_fib_lookup, *dst is destination address.
+ * output: bpf_fib_lookup sets to gateway address
+ */
+ union {
+ /* return for MPLS lookups */
+ __be32 mpls_out[4]; /* support up to 4 labels */
+ __be32 ipv4_dst;
+ __u32 ipv6_dst[4]; /* in6_addr; network order */
+ };
+
+ /* output */
+ __be16 h_vlan_proto;
+ __be16 h_vlan_TCI;
+ __u8 smac[6]; /* ETH_ALEN */
+ __u8 dmac[6]; /* ETH_ALEN */
+};
+
#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/net/core/filter.c b/net/core/filter.c
index 0baa715e4699..ca60d2872da4 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -60,6 +60,10 @@
#include <net/xfrm.h>
#include <linux/bpf_trace.h>
#include <net/xdp_sock.h>
+#include <linux/inetdevice.h>
+#include <net/ip_fib.h>
+#include <net/flow.h>
+#include <net/arp.h>
/**
* sk_filter_trim_cap - run a packet through a socket filter
@@ -4032,6 +4036,265 @@ static const struct bpf_func_proto bpf_skb_get_xfrm_state_proto = {
};
#endif
+#if IS_ENABLED(CONFIG_INET) || IS_ENABLED(CONFIG_IPV6)
+static int bpf_fib_set_fwd_params(struct bpf_fib_lookup *params,
+ const struct neighbour *neigh,
+ const struct net_device *dev)
+{
+ memcpy(params->dmac, neigh->ha, ETH_ALEN);
+ memcpy(params->smac, dev->dev_addr, ETH_ALEN);
+ params->h_vlan_TCI = 0;
+ params->h_vlan_proto = 0;
+
+ return dev->ifindex;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_INET)
+static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
+ u32 flags)
+{
+ struct in_device *in_dev;
+ struct neighbour *neigh;
+ struct net_device *dev;
+ struct fib_result res;
+ struct fib_nh *nh;
+ struct flowi4 fl4;
+ int err;
+
+ dev = dev_get_by_index_rcu(net, params->ifindex);
+ if (unlikely(!dev))
+ return -ENODEV;
+
+ /* verify forwarding is enabled on this interface */
+ in_dev = __in_dev_get_rcu(dev);
+ if (unlikely(!in_dev || !IN_DEV_FORWARD(in_dev)))
+ return 0;
+
+ if (flags & BPF_FIB_LOOKUP_OUTPUT) {
+ fl4.flowi4_iif = 1;
+ fl4.flowi4_oif = params->ifindex;
+ } else {
+ fl4.flowi4_iif = params->ifindex;
+ fl4.flowi4_oif = 0;
+ }
+ fl4.flowi4_tos = params->tos & IPTOS_RT_MASK;
+ fl4.flowi4_scope = RT_SCOPE_UNIVERSE;
+ fl4.flowi4_flags = 0;
+
+ fl4.flowi4_proto = params->l4_protocol;
+ fl4.daddr = params->ipv4_dst;
+ fl4.saddr = params->ipv4_src;
+ fl4.fl4_sport = params->sport;
+ fl4.fl4_dport = params->dport;
+
+ if (flags & BPF_FIB_LOOKUP_DIRECT) {
+ u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN;
+ struct fib_table *tb;
+
+ tb = fib_get_table(net, tbid);
+ if (unlikely(!tb))
+ return 0;
+
+ err = fib_table_lookup(tb, &fl4, &res, FIB_LOOKUP_NOREF);
+ } else {
+ fl4.flowi4_mark = 0;
+ fl4.flowi4_secid = 0;
+ fl4.flowi4_tun_key.tun_id = 0;
+ fl4.flowi4_uid = sock_net_uid(net, NULL);
+
+ err = fib_lookup(net, &fl4, &res, FIB_LOOKUP_NOREF);
+ }
+
+ if (err || res.type != RTN_UNICAST)
+ return 0;
+
+ if (res.fi->fib_nhs > 1)
+ fib_select_path(net, &res, &fl4, NULL);
+
+ nh = &res.fi->fib_nh[res.nh_sel];
+
+ /* do not handle lwt encaps right now */
+ if (nh->nh_lwtstate)
+ return 0;
+
+ dev = nh->nh_dev;
+ if (unlikely(!dev))
+ return 0;
+
+ if (nh->nh_gw)
+ params->ipv4_dst = nh->nh_gw;
+
+ params->rt_metric = res.fi->fib_priority;
+
+ /* xdp and cls_bpf programs are run in RCU-bh so
+ * rcu_read_lock_bh is not needed here
+ */
+ neigh = __ipv4_neigh_lookup_noref(dev, (__force u32)params->ipv4_dst);
+ if (neigh)
+ return bpf_fib_set_fwd_params(params, neigh, dev);
+
+ return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_IPV6)
+static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
+ u32 flags)
+{
+ struct in6_addr *src = (struct in6_addr *) params->ipv6_src;
+ struct in6_addr *dst = (struct in6_addr *) params->ipv6_dst;
+ struct neighbour *neigh;
+ struct net_device *dev;
+ struct inet6_dev *idev;
+ struct fib6_info *f6i;
+ struct flowi6 fl6;
+ int strict = 0;
+ int oif;
+
+ /* link local addresses are never forwarded */
+ if (rt6_need_strict(dst) || rt6_need_strict(src))
+ return 0;
+
+ dev = dev_get_by_index_rcu(net, params->ifindex);
+ if (unlikely(!dev))
+ return -ENODEV;
+
+ idev = __in6_dev_get_safely(dev);
+ if (unlikely(!idev || !net->ipv6.devconf_all->forwarding))
+ return 0;
+
+ if (flags & BPF_FIB_LOOKUP_OUTPUT) {
+ fl6.flowi6_iif = 1;
+ oif = fl6.flowi6_oif = params->ifindex;
+ } else {
+ oif = fl6.flowi6_iif = params->ifindex;
+ fl6.flowi6_oif = 0;
+ strict = RT6_LOOKUP_F_HAS_SADDR;
+ }
+ fl6.flowlabel = params->flowlabel;
+ fl6.flowi6_scope = 0;
+ fl6.flowi6_flags = 0;
+ fl6.mp_hash = 0;
+
+ fl6.flowi6_proto = params->l4_protocol;
+ fl6.daddr = *dst;
+ fl6.saddr = *src;
+ fl6.fl6_sport = params->sport;
+ fl6.fl6_dport = params->dport;
+
+ if (flags & BPF_FIB_LOOKUP_DIRECT) {
+ u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN;
+ struct fib6_table *tb;
+
+ tb = ipv6_stub->fib6_get_table(net, tbid);
+ if (unlikely(!tb))
+ return 0;
+
+ f6i = ipv6_stub->fib6_table_lookup(net, tb, oif, &fl6, strict);
+ } else {
+ fl6.flowi6_mark = 0;
+ fl6.flowi6_secid = 0;
+ fl6.flowi6_tun_key.tun_id = 0;
+ fl6.flowi6_uid = sock_net_uid(net, NULL);
+
+ f6i = ipv6_stub->fib6_lookup(net, oif, &fl6, strict);
+ }
+
+ if (unlikely(IS_ERR_OR_NULL(f6i) || f6i == net->ipv6.fib6_null_entry))
+ return 0;
+
+ if (unlikely(f6i->fib6_flags & RTF_REJECT ||
+ f6i->fib6_type != RTN_UNICAST))
+ return 0;
+
+ if (f6i->fib6_nsiblings && fl6.flowi6_oif == 0)
+ f6i = ipv6_stub->fib6_multipath_select(net, f6i, &fl6,
+ fl6.flowi6_oif, NULL,
+ strict);
+
+ if (f6i->fib6_nh.nh_lwtstate)
+ return 0;
+
+ if (f6i->fib6_flags & RTF_GATEWAY)
+ *dst = f6i->fib6_nh.nh_gw;
+
+ dev = f6i->fib6_nh.nh_dev;
+ params->rt_metric = f6i->fib6_metric;
+
+ /* xdp and cls_bpf programs are run in RCU-bh so rcu_read_lock_bh is
+ * not needed here. Can not use __ipv6_neigh_lookup_noref here
+ * because we need to get nd_tbl via the stub
+ */
+ neigh = ___neigh_lookup_noref(ipv6_stub->nd_tbl, neigh_key_eq128,
+ ndisc_hashfn, dst, dev);
+ if (neigh)
+ return bpf_fib_set_fwd_params(params, neigh, dev);
+
+ return 0;
+}
+#endif
+
+BPF_CALL_4(bpf_xdp_fib_lookup, struct xdp_buff *, ctx,
+ struct bpf_fib_lookup *, params, int, plen, u32, flags)
+{
+ if (plen < sizeof(*params))
+ return -EINVAL;
+
+ switch (params->family) {
+#if IS_ENABLED(CONFIG_INET)
+ case AF_INET:
+ return bpf_ipv4_fib_lookup(dev_net(ctx->rxq->dev), params,
+ flags);
+#endif
+#if IS_ENABLED(CONFIG_IPV6)
+ case AF_INET6:
+ return bpf_ipv6_fib_lookup(dev_net(ctx->rxq->dev), params,
+ flags);
+#endif
+ }
+ return 0;
+}
+
+static const struct bpf_func_proto bpf_xdp_fib_lookup_proto = {
+ .func = bpf_xdp_fib_lookup,
+ .gpl_only = true,
+ .ret_type = RET_INTEGER,
+ .arg1_type = ARG_PTR_TO_CTX,
+ .arg2_type = ARG_PTR_TO_MEM,
+ .arg3_type = ARG_CONST_SIZE,
+ .arg4_type = ARG_ANYTHING,
+};
+
+BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb,
+ struct bpf_fib_lookup *, params, int, plen, u32, flags)
+{
+ if (plen < sizeof(*params))
+ return -EINVAL;
+
+ switch (params->family) {
+#if IS_ENABLED(CONFIG_INET)
+ case AF_INET:
+ return bpf_ipv4_fib_lookup(dev_net(skb->dev), params, flags);
+#endif
+#if IS_ENABLED(CONFIG_IPV6)
+ case AF_INET6:
+ return bpf_ipv6_fib_lookup(dev_net(skb->dev), params, flags);
+#endif
+ }
+ return -ENOTSUPP;
+}
+
+static const struct bpf_func_proto bpf_skb_fib_lookup_proto = {
+ .func = bpf_skb_fib_lookup,
+ .gpl_only = true,
+ .ret_type = RET_INTEGER,
+ .arg1_type = ARG_PTR_TO_CTX,
+ .arg2_type = ARG_PTR_TO_MEM,
+ .arg3_type = ARG_CONST_SIZE,
+ .arg4_type = ARG_ANYTHING,
+};
+
static const struct bpf_func_proto *
bpf_base_func_proto(enum bpf_func_id func_id)
{
@@ -4181,6 +4444,8 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
case BPF_FUNC_skb_get_xfrm_state:
return &bpf_skb_get_xfrm_state_proto;
#endif
+ case BPF_FUNC_fib_lookup:
+ return &bpf_skb_fib_lookup_proto;
default:
return bpf_base_func_proto(func_id);
}
@@ -4206,6 +4471,8 @@ xdp_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
return &bpf_xdp_redirect_map_proto;
case BPF_FUNC_xdp_adjust_tail:
return &bpf_xdp_adjust_tail_proto;
+ case BPF_FUNC_fib_lookup:
+ return &bpf_xdp_fib_lookup_proto;
default:
return bpf_base_func_proto(func_id);
}
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [bpf-next v3 9/9] samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (7 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table David Ahern
@ 2018-05-10 3:34 ` David Ahern
2018-05-10 7:22 ` Jesper Dangaard Brouer
2018-05-10 23:30 ` [bpf-next v3 0/9] bpf: Add helper to do FIB lookups Daniel Borkmann
9 siblings, 1 reply; 16+ messages in thread
From: David Ahern @ 2018-05-10 3:34 UTC (permalink / raw)
To: netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend, David Ahern
Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.
Take this only as a simple example of fast-path forwarding.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
samples/bpf/Makefile | 4 +
samples/bpf/xdp_fwd_kern.c | 115 +++++++++++++++++++++++++
samples/bpf/xdp_fwd_user.c | 136 ++++++++++++++++++++++++++++++
tools/testing/selftests/bpf/bpf_helpers.h | 3 +
4 files changed, 258 insertions(+)
create mode 100644 samples/bpf/xdp_fwd_kern.c
create mode 100644 samples/bpf/xdp_fwd_user.c
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 8e0c7fb6d7cc..28513d6be1bf 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -46,6 +46,7 @@ hostprogs-y += syscall_tp
hostprogs-y += cpustat
hostprogs-y += xdp_adjust_tail
hostprogs-y += xdpsock
+hostprogs-y += xdp_fwd
# Libbpf dependencies
LIBBPF := ../../tools/lib/bpf/bpf.o ../../tools/lib/bpf/nlattr.o
@@ -100,6 +101,7 @@ syscall_tp-objs := bpf_load.o $(LIBBPF) syscall_tp_user.o
cpustat-objs := bpf_load.o $(LIBBPF) cpustat_user.o
xdp_adjust_tail-objs := bpf_load.o $(LIBBPF) xdp_adjust_tail_user.o
xdpsock-objs := bpf_load.o $(LIBBPF) xdpsock_user.o
+xdp_fwd-objs := bpf_load.o $(LIBBPF) xdp_fwd_user.o
# Tell kbuild to always build the programs
always := $(hostprogs-y)
@@ -154,6 +156,7 @@ always += syscall_tp_kern.o
always += cpustat_kern.o
always += xdp_adjust_tail_kern.o
always += xdpsock_kern.o
+always += xdp_fwd_kern.o
HOSTCFLAGS += -I$(objtree)/usr/include
HOSTCFLAGS += -I$(srctree)/tools/lib/
@@ -201,6 +204,7 @@ HOSTLOADLIBES_syscall_tp += -lelf
HOSTLOADLIBES_cpustat += -lelf
HOSTLOADLIBES_xdp_adjust_tail += -lelf
HOSTLOADLIBES_xdpsock += -lelf -pthread
+HOSTLOADLIBES_xdp_fwd += -lelf
# Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline:
# make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang
diff --git a/samples/bpf/xdp_fwd_kern.c b/samples/bpf/xdp_fwd_kern.c
new file mode 100644
index 000000000000..cdf4fc383cc9
--- /dev/null
+++ b/samples/bpf/xdp_fwd_kern.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017-18 David Ahern <dsahern@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#define KBUILD_MODNAME "foo"
+#include <uapi/linux/bpf.h>
+#include <linux/in.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+
+#include "bpf_helpers.h"
+
+#define IPV6_FLOWINFO_MASK cpu_to_be32(0x0FFFFFFF)
+
+struct bpf_map_def SEC("maps") tx_port = {
+ .type = BPF_MAP_TYPE_DEVMAP,
+ .key_size = sizeof(int),
+ .value_size = sizeof(int),
+ .max_entries = 64,
+};
+
+static __always_inline int xdp_fwd_flags(struct xdp_md *ctx, u32 flags)
+{
+ void *data_end = (void *)(long)ctx->data_end;
+ void *data = (void *)(long)ctx->data;
+ struct bpf_fib_lookup fib_params;
+ struct ethhdr *eth = data;
+ int out_index;
+ u16 h_proto;
+ u64 nh_off;
+
+ nh_off = sizeof(*eth);
+ if (data + nh_off > data_end)
+ return XDP_DROP;
+
+ __builtin_memset(&fib_params, 0, sizeof(fib_params));
+
+ h_proto = eth->h_proto;
+ if (h_proto == htons(ETH_P_IP)) {
+ struct iphdr *iph = data + nh_off;
+
+ if (iph + 1 > data_end)
+ return XDP_DROP;
+
+ fib_params.family = AF_INET;
+ fib_params.tos = iph->tos;
+ fib_params.l4_protocol = iph->protocol;
+ fib_params.sport = 0;
+ fib_params.dport = 0;
+ fib_params.tot_len = ntohs(iph->tot_len);
+ fib_params.ipv4_src = iph->saddr;
+ fib_params.ipv4_dst = iph->daddr;
+ } else if (h_proto == htons(ETH_P_IPV6)) {
+ struct in6_addr *src = (struct in6_addr *) fib_params.ipv6_src;
+ struct in6_addr *dst = (struct in6_addr *) fib_params.ipv6_dst;
+ struct ipv6hdr *iph = data + nh_off;
+
+ if (iph + 1 > data_end)
+ return XDP_DROP;
+
+ fib_params.family = AF_INET6;
+ fib_params.flowlabel = *(__be32 *)iph & IPV6_FLOWINFO_MASK;
+ fib_params.l4_protocol = iph->nexthdr;
+ fib_params.sport = 0;
+ fib_params.dport = 0;
+ fib_params.tot_len = ntohs(iph->payload_len);
+ *src = iph->saddr;
+ *dst = iph->daddr;
+ } else {
+ return XDP_PASS;
+ }
+
+ fib_params.ifindex = ctx->ingress_ifindex;
+
+ out_index = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), flags);
+
+ /* verify egress index has xdp support
+ * TO-DO bpf_map_lookup_elem(&tx_port, &key) fails with
+ * cannot pass map_type 14 into func bpf_map_lookup_elem#1:
+ * NOTE: without verification that egress index supports XDP
+ * forwarding packets are dropped.
+ */
+ if (out_index > 0) {
+ memcpy(eth->h_dest, fib_params.dmac, ETH_ALEN);
+ memcpy(eth->h_source, fib_params.smac, ETH_ALEN);
+ return bpf_redirect_map(&tx_port, out_index, 0);
+ }
+
+ return XDP_PASS;
+}
+
+SEC("xdp_fwd")
+int xdp_fwd_prog(struct xdp_md *ctx)
+{
+ return xdp_fwd_flags(ctx, 0);
+}
+
+SEC("xdp_fwd_direct")
+int xdp_fwd_direct_prog(struct xdp_md *ctx)
+{
+ return xdp_fwd_flags(ctx, BPF_FIB_LOOKUP_DIRECT);
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/samples/bpf/xdp_fwd_user.c b/samples/bpf/xdp_fwd_user.c
new file mode 100644
index 000000000000..9c6606f57126
--- /dev/null
+++ b/samples/bpf/xdp_fwd_user.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017-18 David Ahern <dsahern@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/bpf.h>
+#include <linux/if_link.h>
+#include <linux/limits.h>
+#include <net/if.h>
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <libgen.h>
+
+#include "bpf_load.h"
+#include "bpf_util.h"
+#include "libbpf.h"
+
+
+static int do_attach(int idx, int fd, const char *name)
+{
+ int err;
+
+ err = bpf_set_link_xdp_fd(idx, fd, 0);
+ if (err < 0)
+ printf("ERROR: failed to attach program to %s\n", name);
+
+ return err;
+}
+
+static int do_detach(int idx, const char *name)
+{
+ int err;
+
+ err = bpf_set_link_xdp_fd(idx, -1, 0);
+ if (err < 0)
+ printf("ERROR: failed to detach program from %s\n", name);
+
+ return err;
+}
+
+static void usage(const char *prog)
+{
+ fprintf(stderr,
+ "usage: %s [OPTS] interface-list\n"
+ "\nOPTS:\n"
+ " -d detach program\n"
+ " -D direct table lookups (skip fib rules)\n",
+ prog);
+}
+
+int main(int argc, char **argv)
+{
+ char filename[PATH_MAX];
+ int opt, i, idx, err;
+ int prog_id = 0;
+ int attach = 1;
+ int ret = 0;
+
+ while ((opt = getopt(argc, argv, ":dD")) != -1) {
+ switch (opt) {
+ case 'd':
+ attach = 0;
+ break;
+ case 'D':
+ prog_id = 1;
+ break;
+ default:
+ usage(basename(argv[0]));
+ return 1;
+ }
+ }
+
+ if (optind == argc) {
+ usage(basename(argv[0]));
+ return 1;
+ }
+
+ if (attach) {
+ snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+
+ if (access(filename, O_RDONLY) < 0) {
+ printf("error accessing file %s: %s\n",
+ filename, strerror(errno));
+ return 1;
+ }
+
+ if (load_bpf_file(filename)) {
+ printf("%s", bpf_log_buf);
+ return 1;
+ }
+
+ if (!prog_fd[prog_id]) {
+ printf("load_bpf_file: %s\n", strerror(errno));
+ return 1;
+ }
+ }
+ if (attach) {
+ for (i = 1; i < 64; ++i)
+ bpf_map_update_elem(map_fd[0], &i, &i, 0);
+ }
+
+ for (i = optind; i < argc; ++i) {
+ idx = if_nametoindex(argv[i]);
+ if (!idx)
+ idx = strtoul(argv[i], NULL, 0);
+
+ if (!idx) {
+ fprintf(stderr, "Invalid arg\n");
+ return 1;
+ }
+ if (!attach) {
+ err = do_detach(idx, argv[i]);
+ if (err)
+ ret = err;
+ } else {
+ err = do_attach(idx, prog_fd[prog_id], argv[i]);
+ if (err)
+ ret = err;
+ }
+ }
+
+ return ret;
+}
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index 265f8e0e8ada..2375d06c706b 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -103,6 +103,9 @@ static int (*bpf_skb_get_xfrm_state)(void *ctx, int index, void *state,
(void *) BPF_FUNC_skb_get_xfrm_state;
static int (*bpf_get_stack)(void *ctx, void *buf, int size, int flags) =
(void *) BPF_FUNC_get_stack;
+static int (*bpf_fib_lookup)(void *ctx, struct bpf_fib_lookup *params,
+ int plen, __u32 flags) =
+ (void *) BPF_FUNC_fib_lookup;
/* llvm builtin functions that eBPF C program may use to
* emit BPF_LD_ABS and BPF_LD_IND instructions
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [bpf-next v3 9/9] samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP
2018-05-10 3:34 ` [bpf-next v3 9/9] samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP David Ahern
@ 2018-05-10 7:22 ` Jesper Dangaard Brouer
0 siblings, 0 replies; 16+ messages in thread
From: Jesper Dangaard Brouer @ 2018-05-10 7:22 UTC (permalink / raw)
To: David Ahern
Cc: netdev, borkmann, ast, davem, shm, roopa, toke, john.fastabend,
brouer, Tariq Toukan
On Wed, 9 May 2018 20:34:27 -0700
David Ahern <dsahern@gmail.com> wrote:
> Simple example of fast-path forwarding. It has a serious flaw
> in not verifying the egress device index supports XDP forwarding.
> If the egress device does not packets are dropped.
>
> Take this only as a simple example of fast-path forwarding.
>
> Signed-off-by: David Ahern <dsahern@gmail.com>
> Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
I agree that sample program have this flaw, but it should not stop this
patchset. We need to find a more reliable way of detecting/verifying
that an egress device supports XDP forwarding, from within the BPF prog.
As this sample program hints, we could do a lookup in the devmap, to
get this info(?)
--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table
2018-05-10 3:34 ` [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table David Ahern
@ 2018-05-10 7:31 ` Jesper Dangaard Brouer
2018-05-10 9:09 ` Toke Høiland-Jørgensen
2018-05-10 19:27 ` Mathieu Xhonneux
1 sibling, 1 reply; 16+ messages in thread
From: Jesper Dangaard Brouer @ 2018-05-10 7:31 UTC (permalink / raw)
To: David Ahern
Cc: netdev, borkmann, ast, davem, shm, roopa, toke, john.fastabend, brouer
On Wed, 9 May 2018 20:34:26 -0700
David Ahern <dsahern@gmail.com> wrote:
> Provide a helper for doing a FIB and neighbor lookup in the kernel
> tables from an XDP program. The helper provides a fastpath for forwarding
> packets. If the packet is a local delivery or for any reason is not a
> simple lookup and forward, the packet continues up the stack.
>
> If it is to be forwarded, the forwarding can be done directly if the
> neighbor is already known. If the neighbor does not exist, the first
> few packets go up the stack for neighbor resolution. Once resolved, the
> xdp program provides the fast path.
>
> On successful lookup the nexthop dmac, current device smac and egress
> device index are returned.
>
> The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
> are implemented in this patch. The API includes layer 4 parameters if
> the XDP program chooses to do deep packet inspection to allow compare
> against ACLs implemented as FIB rules.
>
> Header rewrite is left to the XDP program.
>
> The lookup takes 2 flags:
> - BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
> straight to the table associated with the device (expert setting for
> those looking to maximize throughput)
>
> - BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
> Default is an ingress lookup.
>
> Initial performance numbers collected by Jesper, forwarded packets/sec:
>
> Full stack XDP FIB lookup XDP Direct lookup
> IPv4 1,947,969 7,074,156 7,415,333
> IPv6 1,728,000 6,165,504 7,262,720
>
The "Full stack" tests were with netfilter modules unloaded. Default
setting with netfilter conntrack loaded and default Fedora firewall
rules, show around 700Kpps.
> These number are single CPU core forwarding on a Broadwell
> E5-1650 v4 @ 3.60GHz.
>
> Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
This helper is awesome, as it really shows how XDP is meant to work in
concert and cooperate with the existing network stack.
--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table
2018-05-10 7:31 ` Jesper Dangaard Brouer
@ 2018-05-10 9:09 ` Toke Høiland-Jørgensen
0 siblings, 0 replies; 16+ messages in thread
From: Toke Høiland-Jørgensen @ 2018-05-10 9:09 UTC (permalink / raw)
To: Jesper Dangaard Brouer, David Ahern
Cc: netdev, borkmann, ast, davem, shm, roopa, john.fastabend, brouer
Jesper Dangaard Brouer <brouer@redhat.com> writes:
> On Wed, 9 May 2018 20:34:26 -0700
> David Ahern <dsahern@gmail.com> wrote:
>
>> Provide a helper for doing a FIB and neighbor lookup in the kernel
>> tables from an XDP program. The helper provides a fastpath for forwarding
>> packets. If the packet is a local delivery or for any reason is not a
>> simple lookup and forward, the packet continues up the stack.
>>
>> If it is to be forwarded, the forwarding can be done directly if the
>> neighbor is already known. If the neighbor does not exist, the first
>> few packets go up the stack for neighbor resolution. Once resolved, the
>> xdp program provides the fast path.
>>
>> On successful lookup the nexthop dmac, current device smac and egress
>> device index are returned.
>>
>> The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
>> are implemented in this patch. The API includes layer 4 parameters if
>> the XDP program chooses to do deep packet inspection to allow compare
>> against ACLs implemented as FIB rules.
>>
>> Header rewrite is left to the XDP program.
>>
>> The lookup takes 2 flags:
>> - BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
>> straight to the table associated with the device (expert setting for
>> those looking to maximize throughput)
>>
>> - BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
>> Default is an ingress lookup.
>>
>> Initial performance numbers collected by Jesper, forwarded packets/sec:
>>
>> Full stack XDP FIB lookup XDP Direct lookup
>> IPv4 1,947,969 7,074,156 7,415,333
>> IPv6 1,728,000 6,165,504 7,262,720
>>
>
> The "Full stack" tests were with netfilter modules unloaded. Default
> setting with netfilter conntrack loaded and default Fedora firewall
> rules, show around 700Kpps.
>
>> These number are single CPU core forwarding on a Broadwell
>> E5-1650 v4 @ 3.60GHz.
>>
>> Signed-off-by: David Ahern <dsahern@gmail.com>
>
> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
>
> This helper is awesome, as it really shows how XDP is meant to work in
> concert and cooperate with the existing network stack.
+1!
-Toke
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table
2018-05-10 3:34 ` [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table David Ahern
2018-05-10 7:31 ` Jesper Dangaard Brouer
@ 2018-05-10 19:27 ` Mathieu Xhonneux
2018-05-11 6:30 ` David Ahern
1 sibling, 1 reply; 16+ messages in thread
From: Mathieu Xhonneux @ 2018-05-10 19:27 UTC (permalink / raw)
To: David Ahern
Cc: netdev, borkmann, ast, David Miller, shm, roopa, brouer, toke,
john.fastabend
I'm quite interested in this helper to implement OAM features (through
other hooks, e.g. the BPF LWT hook). Do you have an idea about how it
behaves with ECMP routes (with IPv4 and/or IPv6) ? In IPv6, I'm
guessing that the returned gateway address is always a link-local
address ?
Thanks.
2018-05-10 5:34 GMT+02:00 David Ahern <dsahern@gmail.com>:
>
> Provide a helper for doing a FIB and neighbor lookup in the kernel
> tables from an XDP program. The helper provides a fastpath for forwarding
> packets. If the packet is a local delivery or for any reason is not a
> simple lookup and forward, the packet continues up the stack.
>
> If it is to be forwarded, the forwarding can be done directly if the
> neighbor is already known. If the neighbor does not exist, the first
> few packets go up the stack for neighbor resolution. Once resolved, the
> xdp program provides the fast path.
>
> On successful lookup the nexthop dmac, current device smac and egress
> device index are returned.
>
> The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
> are implemented in this patch. The API includes layer 4 parameters if
> the XDP program chooses to do deep packet inspection to allow compare
> against ACLs implemented as FIB rules.
>
> Header rewrite is left to the XDP program.
>
> The lookup takes 2 flags:
> - BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
> straight to the table associated with the device (expert setting for
> those looking to maximize throughput)
>
> - BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
> Default is an ingress lookup.
>
> Initial performance numbers collected by Jesper, forwarded packets/sec:
>
> Full stack XDP FIB lookup XDP Direct lookup
> IPv4 1,947,969 7,074,156 7,415,333
> IPv6 1,728,000 6,165,504 7,262,720
>
> These number are single CPU core forwarding on a Broadwell
> E5-1650 v4 @ 3.60GHz.
>
> Signed-off-by: David Ahern <dsahern@gmail.com>
> ---
> include/uapi/linux/bpf.h | 81 +++++++++++++-
> net/core/filter.c | 267 +++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 347 insertions(+), 1 deletion(-)
>
> diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> index d615c777b573..02e4112510f8 100644
> --- a/include/uapi/linux/bpf.h
> +++ b/include/uapi/linux/bpf.h
> @@ -1828,6 +1828,33 @@ union bpf_attr {
> * Return
> * 0 on success, or a negative error in case of failure.
> *
> + *
> + * int bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
> + * Description
> + * Do FIB lookup in kernel tables using parameters in *params*.
> + * If lookup is successful and result shows packet is to be
> + * forwarded, the neighbor tables are searched for the nexthop.
> + * If successful (ie., FIB lookup shows forwarding and nexthop
> + * is resolved), the nexthop address is returned in ipv4_dst,
> + * ipv6_dst or mpls_out based on family, smac is set to mac
> + * address of egress device, dmac is set to nexthop mac address,
> + * rt_metric is set to metric from route.
> + *
> + * *plen* argument is the size of the passed in struct.
> + * *flags* argument can be one or more BPF_FIB_LOOKUP_ flags:
> + *
> + * **BPF_FIB_LOOKUP_DIRECT** means do a direct table lookup vs
> + * full lookup using FIB rules
> + * **BPF_FIB_LOOKUP_OUTPUT** means do lookup from an egress
> + * perspective (default is ingress)
> + *
> + * *ctx* is either **struct xdp_md** for XDP programs or
> + * **struct sk_buff** tc cls_act programs.
> + *
> + * Return
> + * Egress device index on success, 0 if packet needs to continue
> + * up the stack for further processing or a negative error in case
> + * of failure.
> */
> #define __BPF_FUNC_MAPPER(FN) \
> FN(unspec), \
> @@ -1898,7 +1925,8 @@ union bpf_attr {
> FN(xdp_adjust_tail), \
> FN(skb_get_xfrm_state), \
> FN(get_stack), \
> - FN(skb_load_bytes_relative),
> + FN(skb_load_bytes_relative), \
> + FN(fib_lookup),
>
> /* integer value in 'imm' field of BPF_CALL instruction selects which helper
> * function eBPF program intends to call
> @@ -2321,4 +2349,55 @@ struct bpf_raw_tracepoint_args {
> __u64 args[0];
> };
>
> +/* DIRECT: Skip the FIB rules and go to FIB table associated with device
> + * OUTPUT: Do lookup from egress perspective; default is ingress
> + */
> +#define BPF_FIB_LOOKUP_DIRECT BIT(0)
> +#define BPF_FIB_LOOKUP_OUTPUT BIT(1)
> +
> +struct bpf_fib_lookup {
> + /* input */
> + __u8 family; /* network family, AF_INET, AF_INET6, AF_MPLS */
> +
> + /* set if lookup is to consider L4 data - e.g., FIB rules */
> + __u8 l4_protocol;
> + __be16 sport;
> + __be16 dport;
> +
> + /* total length of packet from network header - used for MTU check */
> + __u16 tot_len;
> + __u32 ifindex; /* L3 device index for lookup */
> +
> + union {
> + /* inputs to lookup */
> + __u8 tos; /* AF_INET */
> + __be32 flowlabel; /* AF_INET6 */
> +
> + /* output: metric of fib result */
> + __u32 rt_metric;
> + };
> +
> + union {
> + __be32 mpls_in;
> + __be32 ipv4_src;
> + __u32 ipv6_src[4]; /* in6_addr; network order */
> + };
> +
> + /* input to bpf_fib_lookup, *dst is destination address.
> + * output: bpf_fib_lookup sets to gateway address
> + */
> + union {
> + /* return for MPLS lookups */
> + __be32 mpls_out[4]; /* support up to 4 labels */
> + __be32 ipv4_dst;
> + __u32 ipv6_dst[4]; /* in6_addr; network order */
> + };
> +
> + /* output */
> + __be16 h_vlan_proto;
> + __be16 h_vlan_TCI;
> + __u8 smac[6]; /* ETH_ALEN */
> + __u8 dmac[6]; /* ETH_ALEN */
> +};
> +
> #endif /* _UAPI__LINUX_BPF_H__ */
> diff --git a/net/core/filter.c b/net/core/filter.c
> index 0baa715e4699..ca60d2872da4 100644
> --- a/net/core/filter.c
> +++ b/net/core/filter.c
> @@ -60,6 +60,10 @@
> #include <net/xfrm.h>
> #include <linux/bpf_trace.h>
> #include <net/xdp_sock.h>
> +#include <linux/inetdevice.h>
> +#include <net/ip_fib.h>
> +#include <net/flow.h>
> +#include <net/arp.h>
>
> /**
> * sk_filter_trim_cap - run a packet through a socket filter
> @@ -4032,6 +4036,265 @@ static const struct bpf_func_proto bpf_skb_get_xfrm_state_proto = {
> };
> #endif
>
> +#if IS_ENABLED(CONFIG_INET) || IS_ENABLED(CONFIG_IPV6)
> +static int bpf_fib_set_fwd_params(struct bpf_fib_lookup *params,
> + const struct neighbour *neigh,
> + const struct net_device *dev)
> +{
> + memcpy(params->dmac, neigh->ha, ETH_ALEN);
> + memcpy(params->smac, dev->dev_addr, ETH_ALEN);
> + params->h_vlan_TCI = 0;
> + params->h_vlan_proto = 0;
> +
> + return dev->ifindex;
> +}
> +#endif
> +
> +#if IS_ENABLED(CONFIG_INET)
> +static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
> + u32 flags)
> +{
> + struct in_device *in_dev;
> + struct neighbour *neigh;
> + struct net_device *dev;
> + struct fib_result res;
> + struct fib_nh *nh;
> + struct flowi4 fl4;
> + int err;
> +
> + dev = dev_get_by_index_rcu(net, params->ifindex);
> + if (unlikely(!dev))
> + return -ENODEV;
> +
> + /* verify forwarding is enabled on this interface */
> + in_dev = __in_dev_get_rcu(dev);
> + if (unlikely(!in_dev || !IN_DEV_FORWARD(in_dev)))
> + return 0;
> +
> + if (flags & BPF_FIB_LOOKUP_OUTPUT) {
> + fl4.flowi4_iif = 1;
> + fl4.flowi4_oif = params->ifindex;
> + } else {
> + fl4.flowi4_iif = params->ifindex;
> + fl4.flowi4_oif = 0;
> + }
> + fl4.flowi4_tos = params->tos & IPTOS_RT_MASK;
> + fl4.flowi4_scope = RT_SCOPE_UNIVERSE;
> + fl4.flowi4_flags = 0;
> +
> + fl4.flowi4_proto = params->l4_protocol;
> + fl4.daddr = params->ipv4_dst;
> + fl4.saddr = params->ipv4_src;
> + fl4.fl4_sport = params->sport;
> + fl4.fl4_dport = params->dport;
> +
> + if (flags & BPF_FIB_LOOKUP_DIRECT) {
> + u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN;
> + struct fib_table *tb;
> +
> + tb = fib_get_table(net, tbid);
> + if (unlikely(!tb))
> + return 0;
> +
> + err = fib_table_lookup(tb, &fl4, &res, FIB_LOOKUP_NOREF);
> + } else {
> + fl4.flowi4_mark = 0;
> + fl4.flowi4_secid = 0;
> + fl4.flowi4_tun_key.tun_id = 0;
> + fl4.flowi4_uid = sock_net_uid(net, NULL);
> +
> + err = fib_lookup(net, &fl4, &res, FIB_LOOKUP_NOREF);
> + }
> +
> + if (err || res.type != RTN_UNICAST)
> + return 0;
> +
> + if (res.fi->fib_nhs > 1)
> + fib_select_path(net, &res, &fl4, NULL);
> +
> + nh = &res.fi->fib_nh[res.nh_sel];
> +
> + /* do not handle lwt encaps right now */
> + if (nh->nh_lwtstate)
> + return 0;
> +
> + dev = nh->nh_dev;
> + if (unlikely(!dev))
> + return 0;
> +
> + if (nh->nh_gw)
> + params->ipv4_dst = nh->nh_gw;
> +
> + params->rt_metric = res.fi->fib_priority;
> +
> + /* xdp and cls_bpf programs are run in RCU-bh so
> + * rcu_read_lock_bh is not needed here
> + */
> + neigh = __ipv4_neigh_lookup_noref(dev, (__force u32)params->ipv4_dst);
> + if (neigh)
> + return bpf_fib_set_fwd_params(params, neigh, dev);
> +
> + return 0;
> +}
> +#endif
> +
> +#if IS_ENABLED(CONFIG_IPV6)
> +static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
> + u32 flags)
> +{
> + struct in6_addr *src = (struct in6_addr *) params->ipv6_src;
> + struct in6_addr *dst = (struct in6_addr *) params->ipv6_dst;
> + struct neighbour *neigh;
> + struct net_device *dev;
> + struct inet6_dev *idev;
> + struct fib6_info *f6i;
> + struct flowi6 fl6;
> + int strict = 0;
> + int oif;
> +
> + /* link local addresses are never forwarded */
> + if (rt6_need_strict(dst) || rt6_need_strict(src))
> + return 0;
> +
> + dev = dev_get_by_index_rcu(net, params->ifindex);
> + if (unlikely(!dev))
> + return -ENODEV;
> +
> + idev = __in6_dev_get_safely(dev);
> + if (unlikely(!idev || !net->ipv6.devconf_all->forwarding))
> + return 0;
> +
> + if (flags & BPF_FIB_LOOKUP_OUTPUT) {
> + fl6.flowi6_iif = 1;
> + oif = fl6.flowi6_oif = params->ifindex;
> + } else {
> + oif = fl6.flowi6_iif = params->ifindex;
> + fl6.flowi6_oif = 0;
> + strict = RT6_LOOKUP_F_HAS_SADDR;
> + }
> + fl6.flowlabel = params->flowlabel;
> + fl6.flowi6_scope = 0;
> + fl6.flowi6_flags = 0;
> + fl6.mp_hash = 0;
> +
> + fl6.flowi6_proto = params->l4_protocol;
> + fl6.daddr = *dst;
> + fl6.saddr = *src;
> + fl6.fl6_sport = params->sport;
> + fl6.fl6_dport = params->dport;
> +
> + if (flags & BPF_FIB_LOOKUP_DIRECT) {
> + u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN;
> + struct fib6_table *tb;
> +
> + tb = ipv6_stub->fib6_get_table(net, tbid);
> + if (unlikely(!tb))
> + return 0;
> +
> + f6i = ipv6_stub->fib6_table_lookup(net, tb, oif, &fl6, strict);
> + } else {
> + fl6.flowi6_mark = 0;
> + fl6.flowi6_secid = 0;
> + fl6.flowi6_tun_key.tun_id = 0;
> + fl6.flowi6_uid = sock_net_uid(net, NULL);
> +
> + f6i = ipv6_stub->fib6_lookup(net, oif, &fl6, strict);
> + }
> +
> + if (unlikely(IS_ERR_OR_NULL(f6i) || f6i == net->ipv6.fib6_null_entry))
> + return 0;
> +
> + if (unlikely(f6i->fib6_flags & RTF_REJECT ||
> + f6i->fib6_type != RTN_UNICAST))
> + return 0;
> +
> + if (f6i->fib6_nsiblings && fl6.flowi6_oif == 0)
> + f6i = ipv6_stub->fib6_multipath_select(net, f6i, &fl6,
> + fl6.flowi6_oif, NULL,
> + strict);
> +
> + if (f6i->fib6_nh.nh_lwtstate)
> + return 0;
> +
> + if (f6i->fib6_flags & RTF_GATEWAY)
> + *dst = f6i->fib6_nh.nh_gw;
> +
> + dev = f6i->fib6_nh.nh_dev;
> + params->rt_metric = f6i->fib6_metric;
> +
> + /* xdp and cls_bpf programs are run in RCU-bh so rcu_read_lock_bh is
> + * not needed here. Can not use __ipv6_neigh_lookup_noref here
> + * because we need to get nd_tbl via the stub
> + */
> + neigh = ___neigh_lookup_noref(ipv6_stub->nd_tbl, neigh_key_eq128,
> + ndisc_hashfn, dst, dev);
> + if (neigh)
> + return bpf_fib_set_fwd_params(params, neigh, dev);
> +
> + return 0;
> +}
> +#endif
> +
> +BPF_CALL_4(bpf_xdp_fib_lookup, struct xdp_buff *, ctx,
> + struct bpf_fib_lookup *, params, int, plen, u32, flags)
> +{
> + if (plen < sizeof(*params))
> + return -EINVAL;
> +
> + switch (params->family) {
> +#if IS_ENABLED(CONFIG_INET)
> + case AF_INET:
> + return bpf_ipv4_fib_lookup(dev_net(ctx->rxq->dev), params,
> + flags);
> +#endif
> +#if IS_ENABLED(CONFIG_IPV6)
> + case AF_INET6:
> + return bpf_ipv6_fib_lookup(dev_net(ctx->rxq->dev), params,
> + flags);
> +#endif
> + }
> + return 0;
> +}
> +
> +static const struct bpf_func_proto bpf_xdp_fib_lookup_proto = {
> + .func = bpf_xdp_fib_lookup,
> + .gpl_only = true,
> + .ret_type = RET_INTEGER,
> + .arg1_type = ARG_PTR_TO_CTX,
> + .arg2_type = ARG_PTR_TO_MEM,
> + .arg3_type = ARG_CONST_SIZE,
> + .arg4_type = ARG_ANYTHING,
> +};
> +
> +BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb,
> + struct bpf_fib_lookup *, params, int, plen, u32, flags)
> +{
> + if (plen < sizeof(*params))
> + return -EINVAL;
> +
> + switch (params->family) {
> +#if IS_ENABLED(CONFIG_INET)
> + case AF_INET:
> + return bpf_ipv4_fib_lookup(dev_net(skb->dev), params, flags);
> +#endif
> +#if IS_ENABLED(CONFIG_IPV6)
> + case AF_INET6:
> + return bpf_ipv6_fib_lookup(dev_net(skb->dev), params, flags);
> +#endif
> + }
> + return -ENOTSUPP;
> +}
> +
> +static const struct bpf_func_proto bpf_skb_fib_lookup_proto = {
> + .func = bpf_skb_fib_lookup,
> + .gpl_only = true,
> + .ret_type = RET_INTEGER,
> + .arg1_type = ARG_PTR_TO_CTX,
> + .arg2_type = ARG_PTR_TO_MEM,
> + .arg3_type = ARG_CONST_SIZE,
> + .arg4_type = ARG_ANYTHING,
> +};
> +
> static const struct bpf_func_proto *
> bpf_base_func_proto(enum bpf_func_id func_id)
> {
> @@ -4181,6 +4444,8 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
> case BPF_FUNC_skb_get_xfrm_state:
> return &bpf_skb_get_xfrm_state_proto;
> #endif
> + case BPF_FUNC_fib_lookup:
> + return &bpf_skb_fib_lookup_proto;
> default:
> return bpf_base_func_proto(func_id);
> }
> @@ -4206,6 +4471,8 @@ xdp_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
> return &bpf_xdp_redirect_map_proto;
> case BPF_FUNC_xdp_adjust_tail:
> return &bpf_xdp_adjust_tail_proto;
> + case BPF_FUNC_fib_lookup:
> + return &bpf_xdp_fib_lookup_proto;
> default:
> return bpf_base_func_proto(func_id);
> }
> --
> 2.11.0
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [bpf-next v3 0/9] bpf: Add helper to do FIB lookups
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
` (8 preceding siblings ...)
2018-05-10 3:34 ` [bpf-next v3 9/9] samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP David Ahern
@ 2018-05-10 23:30 ` Daniel Borkmann
9 siblings, 0 replies; 16+ messages in thread
From: Daniel Borkmann @ 2018-05-10 23:30 UTC (permalink / raw)
To: David Ahern, netdev, borkmann, ast
Cc: davem, shm, roopa, brouer, toke, john.fastabend
On 05/10/2018 05:34 AM, David Ahern wrote:
> Provide a helper for doing a FIB and neighbor lookup in the kernel
> tables from an XDP program. The helper provides a fastpath for forwarding
> packets. If the packet is a local delivery or for any reason is not a
> simple lookup and forward, the packet is expected to continue up the stack
> for full processing.
>
> The response from a FIB and neighbor lookup is either the egress index
> with the bpf_fib_lookup struct filled in with dmac and gateway or
> 0 meaning the packet should continue up the stack. In time we can
> revisit this to return the FIB lookup result errno if it is one of the
> special RTN_'s such as RTN_BLACKHOLE (-EINVAL) so that the XDP
> programs can do an early drop if desired.
>
> Patches 1-6 do some more refactoring to IPv6 with the end goal of
> extracting a FIB lookup function that aligns with fib_lookup for IPv4,
> basically returning a fib6_info without creating a dst based entry.
>
> Patch 7 adds lookup functions to the ipv6 stub. These are needed since
> bpf is built into the kernel and ipv6 may not be built or loaded.
>
> Patch 8 adds the bpf helper and 9 adds a sample program.
>
> v3
> - remove ETH_ALEN and in6_addr from uapi header
Applied to bpf-next, thanks David!
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table
2018-05-10 19:27 ` Mathieu Xhonneux
@ 2018-05-11 6:30 ` David Ahern
0 siblings, 0 replies; 16+ messages in thread
From: David Ahern @ 2018-05-11 6:30 UTC (permalink / raw)
To: Mathieu Xhonneux
Cc: netdev, borkmann, ast, David Miller, shm, roopa, brouer, toke,
john.fastabend
On 5/10/18 12:27 PM, Mathieu Xhonneux wrote:
> I'm quite interested in this helper to implement OAM features (through
> other hooks, e.g. the BPF LWT hook). Do you have an idea about how it
> behaves with ECMP routes (with IPv4 and/or IPv6) ? In IPv6, I'm
> guessing that the returned gateway address is always a link-local
> address ?
ECMP works with BPF and forwarding just like it does with the full stack
-- the traffic should be distributed based on the L3 or L4 hash
algorithm and the number of links.
As for the IPv6 gateway question, it returns the gateway of the route in
the FIB -- ie., link local or global address. No assumptions are
necessary or made for the BPF helper.
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2018-05-11 6:29 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-10 3:34 [bpf-next v3 0/9] bpf: Add helper to do FIB lookups David Ahern
2018-05-10 3:34 ` [bpf-next v3 1/9] net/ipv6: Rename fib6_lookup to fib6_node_lookup David Ahern
2018-05-10 3:34 ` [bpf-next v3 2/9] net/ipv6: Rename rt6_multipath_select David Ahern
2018-05-10 3:34 ` [bpf-next v3 3/9] net/ipv6: Extract table lookup from ip6_pol_route David Ahern
2018-05-10 3:34 ` [bpf-next v3 4/9] net/ipv6: Refactor fib6_rule_action David Ahern
2018-05-10 3:34 ` [bpf-next v3 5/9] net/ipv6: Add fib6_lookup David Ahern
2018-05-10 3:34 ` [bpf-next v3 6/9] net/ipv6: Update fib6 tracepoint to take fib6_info David Ahern
2018-05-10 3:34 ` [bpf-next v3 7/9] net/ipv6: Add fib lookup stubs for use in bpf helper David Ahern
2018-05-10 3:34 ` [bpf-next v3 8/9] bpf: Provide helper to do forwarding lookups in kernel FIB table David Ahern
2018-05-10 7:31 ` Jesper Dangaard Brouer
2018-05-10 9:09 ` Toke Høiland-Jørgensen
2018-05-10 19:27 ` Mathieu Xhonneux
2018-05-11 6:30 ` David Ahern
2018-05-10 3:34 ` [bpf-next v3 9/9] samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP David Ahern
2018-05-10 7:22 ` Jesper Dangaard Brouer
2018-05-10 23:30 ` [bpf-next v3 0/9] bpf: Add helper to do FIB lookups Daniel Borkmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.