From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kuninori Morimoto Subject: [PATCH 044/187] ASoC: wm9090: replace codec to component Date: Fri, 12 Jan 2018 01:20:43 +0000 Message-ID: <87lgh3c1qw.wl%kuninori.morimoto.gx@renesas.com> References: <87bmhzevk9.wl%kuninori.morimoto.gx@renesas.com> Mime-Version: 1.0 (generated by SEMI-EPG 1.14.7 - "Harue") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from relmlie1.idc.renesas.com (relmlor2.renesas.com [210.160.252.172]) by alsa0.perex.cz (Postfix) with ESMTP id 6E0FB267C71 for ; Fri, 12 Jan 2018 02:20:48 +0100 (CET) In-Reply-To: <87bmhzevk9.wl%kuninori.morimoto.gx@renesas.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Mark Brown Cc: Linux-ALSA , Simon List-Id: alsa-devel@alsa-project.org From: Kuninori Morimoto Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto --- sound/soc/codecs/wm9090.c | 109 ++++++++++++++++++++++------------------------ 1 file changed, 53 insertions(+), 56 deletions(-) diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c index 5a13138..9cd5f93 100644 --- a/sound/soc/codecs/wm9090.c +++ b/sound/soc/codecs/wm9090.c @@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg) } } -static void wait_for_dc_servo(struct snd_soc_codec *codec) +static void wait_for_dc_servo(struct snd_soc_component *component) { unsigned int reg; int count = 0; - dev_dbg(codec->dev, "Waiting for DC servo...\n"); + dev_dbg(component->dev, "Waiting for DC servo...\n"); do { count++; msleep(1); - reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0); - dev_dbg(codec->dev, "DC servo status: %x\n", reg); + reg = snd_soc_component_read32(component, WM9090_DC_SERVO_READBACK_0); + dev_dbg(component->dev, "DC servo status: %x\n", reg); } while ((reg & WM9090_DCS_CAL_COMPLETE_MASK) != WM9090_DCS_CAL_COMPLETE_MASK && count < 1000); if ((reg & WM9090_DCS_CAL_COMPLETE_MASK) != WM9090_DCS_CAL_COMPLETE_MASK) - dev_err(codec->dev, "Timed out waiting for DC Servo\n"); + dev_err(component->dev, "Timed out waiting for DC Servo\n"); } static const DECLARE_TLV_DB_RANGE(in_tlv, @@ -251,22 +251,22 @@ static const DECLARE_TLV_DB_RANGE(spkboost_tlv, static int hp_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); - unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + unsigned int reg = snd_soc_component_read32(component, WM9090_ANALOGUE_HP_0); switch (event) { case SND_SOC_DAPM_POST_PMU: - snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, + snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1, WM9090_CP_ENA, WM9090_CP_ENA); msleep(5); - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA); reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY; - snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); + snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg); /* Start the DC servo. We don't currently use the * ability to save the state since we don't have full @@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w, * DC offsets; see the WM8904 driver for an example of * doing so. */ - snd_soc_write(codec, WM9090_DC_SERVO_0, + snd_soc_component_write(component, WM9090_DC_SERVO_0, WM9090_DCS_ENA_CHAN_0 | WM9090_DCS_ENA_CHAN_1 | WM9090_DCS_TRIG_STARTUP_1 | WM9090_DCS_TRIG_STARTUP_0); - wait_for_dc_servo(codec); + wait_for_dc_servo(component); reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT | WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT; - snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); + snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg); break; case SND_SOC_DAPM_PRE_PMD: @@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w, WM9090_HPOUT1R_DLY | WM9090_HPOUT1R_OUTP); - snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); + snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg); - snd_soc_write(codec, WM9090_DC_SERVO_0, 0); + snd_soc_component_write(component, WM9090_DC_SERVO_0, 0); - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, 0); - snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, + snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1, WM9090_CP_ENA, 0); break; } @@ -419,10 +419,10 @@ static int hp_ev(struct snd_soc_dapm_widget *w, { "IN2A PGA", NULL, "IN2-" }, }; -static int wm9090_add_controls(struct snd_soc_codec *codec) +static int wm9090_add_controls(struct snd_soc_component *component) { - struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); - struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); + struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); int i; snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets, @@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); - snd_soc_add_codec_controls(codec, wm9090_controls, + snd_soc_add_component_controls(component, wm9090_controls, ARRAY_SIZE(wm9090_controls)); if (wm9090->pdata.lin1_diff) { @@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) } else { snd_soc_dapm_add_routes(dapm, audio_map_in1_se, ARRAY_SIZE(audio_map_in1_se)); - snd_soc_add_codec_controls(codec, wm9090_in1_se_controls, + snd_soc_add_component_controls(component, wm9090_in1_se_controls, ARRAY_SIZE(wm9090_in1_se_controls)); } @@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) } else { snd_soc_dapm_add_routes(dapm, audio_map_in2_se, ARRAY_SIZE(audio_map_in2_se)); - snd_soc_add_codec_controls(codec, wm9090_in2_se_controls, + snd_soc_add_component_controls(component, wm9090_in2_se_controls, ARRAY_SIZE(wm9090_in2_se_controls)); } if (wm9090->pdata.agc_ena) { for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++) - snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i, + snd_soc_component_write(component, WM9090_AGC_CONTROL_0 + i, wm9090->pdata.agc[i]); - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3, WM9090_AGC_ENA, WM9090_AGC_ENA); } else { - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3, WM9090_AGC_ENA, 0); } @@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) * The machine driver should call this from their set_bias_level; if there * isn't one then this can just be set as the set_bias_level function. */ -static int wm9090_set_bias_level(struct snd_soc_codec *codec, +static int wm9090_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { - struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); + struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component); switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA, + snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA, WM9090_VMID_ENA); - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, WM9090_BIAS_ENA | @@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, break; case SND_SOC_BIAS_STANDBY: - if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { /* Restore the register cache */ regcache_sync(wm9090->regmap); } @@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, * ground referenced outputs and class D speaker mean that * latency is not an issue. */ - snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1, WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0); - snd_soc_update_bits(codec, WM9090_ANTIPOP2, + snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA, 0); break; @@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, return 0; } -static int wm9090_probe(struct snd_soc_codec *codec) +static int wm9090_probe(struct snd_soc_component *component) { /* Configure some defaults; they will be written out when we * bring the bias up. */ - snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_A_VOLUME, WM9090_IN1_VU | WM9090_IN1A_ZC, WM9090_IN1_VU | WM9090_IN1A_ZC); - snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_B_VOLUME, WM9090_IN1_VU | WM9090_IN1B_ZC, WM9090_IN1_VU | WM9090_IN1B_ZC); - snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_A_VOLUME, WM9090_IN2_VU | WM9090_IN2A_ZC, WM9090_IN2_VU | WM9090_IN2A_ZC); - snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME, + snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_B_VOLUME, WM9090_IN2_VU | WM9090_IN2B_ZC, WM9090_IN2_VU | WM9090_IN2B_ZC); - snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT, + snd_soc_component_update_bits(component, WM9090_SPEAKER_VOLUME_LEFT, WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC, WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC); - snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME, + snd_soc_component_update_bits(component, WM9090_LEFT_OUTPUT_VOLUME, WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC, WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC); - snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME, + snd_soc_component_update_bits(component, WM9090_RIGHT_OUTPUT_VOLUME, WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC, WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC); - snd_soc_update_bits(codec, WM9090_CLOCKING_1, + snd_soc_component_update_bits(component, WM9090_CLOCKING_1, WM9090_TOCLK_ENA, WM9090_TOCLK_ENA); - wm9090_add_controls(codec); + wm9090_add_controls(component); return 0; } -static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = { - .probe = wm9090_probe, - .set_bias_level = wm9090_set_bias_level, - .suspend_bias_off = true, +static const struct snd_soc_component_driver soc_component_dev_wm9090 = { + .probe = wm9090_probe, + .set_bias_level = wm9090_set_bias_level, + .suspend_bias_off = 1, + .idle_bias_on = 1, + .pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, }; static const struct regmap_config wm9090_regmap = { @@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, wm9090); - ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_wm9090, NULL, 0); + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_wm9090, NULL, 0); if (ret != 0) { dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); return ret; @@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, return 0; } -static int wm9090_i2c_remove(struct i2c_client *i2c) -{ - snd_soc_unregister_codec(&i2c->dev); - return 0; -} - static const struct i2c_device_id wm9090_id[] = { { "wm9090", 0 }, { "wm9093", 0 }, @@ -635,7 +633,6 @@ static int wm9090_i2c_remove(struct i2c_client *i2c) .name = "wm9090", }, .probe = wm9090_i2c_probe, - .remove = wm9090_i2c_remove, .id_table = wm9090_id, }; -- 1.9.1