[PATCH v6 00/17] archs/random: fallback to best raw ktime when no cycle counter

[PATCH v6 00/17] archs/random: fallback to best raw ktime when no cycle counter

[Jason A. Donenfeld]

[Preface for v6: if you're an arch maintainer, a simple Acked-by would
 be appreciated if this looks okay.]

Hi folks,

The RNG uses a function called random_get_entropy() basically anytime
that it needs to timestamp an event. For example, an interrupt comes in,
and we mix a random_get_entropy() into the entropy pool somehow.
Somebody mashes their keyboard or moves their mouse around? We mix a
random_get_entropy() into the entropy pool. It's one of the main
varieties of input.

Unfortunately, it's always 0 on a few platforms. The RNG has accumulated
various hacks to deal with this, but in general it's not great. Surely
we can do better than 0. In fact, *anything* that's not the same exact
value all the time would be better than 0. Even a counter that
increments once per hour would be better than 0! I think you get the
idea.

On most platforms, random_get_entropy() is aliased to get_cycles(),
which makes sense for platforms where get_cycles() is defined. RDTSC,
for example, has all the characteristics we care about for this
function: it's fast to acquire (i.e. acceptable in an irq handler),
pretty high precision, available, forms a 2-monotone distribution, etc.
But for platforms without that, what is the next best thing?

Sometimes the next best thing is architecture-defined. For example,
really old MIPS has the C0 random register, which isn't quite a cycle
counter, but is at least something. However, some platforms don't even
have an architecture-defined fallback.

Fortunately, the timekeeping subsystem has already solved this problem
of trying to determine what the least bad clock is on constrained
systems, falling back to jiffies in the worst case. By exporting the raw
clock, we can get a decent fallback function for when there's no cycle
counter or architecture-specific function.

This series makes the RNG more useful on: m68k, RISC-V, MIPS, ARM32,
NIOS II, SPARC32, Xtensa, OpenRISC, and Usermode Linux. Previously these
platforms would, in certain circumstances, but out of luck with regards to
having any type of event timestamping source in the RNG.

Finally, note that this series isn't about "jitter entropy" or other
ways of initializing the RNG. That's a different topic for a different
thread. Please don't let this discussion veer off into that. Here, I'm
just trying to find a good fallback counter/timer for platforms without
get_cycles(), a question with limited scope.

If this (or a future revision) looks good to you all and receives the
requisite acks, my plan was to take these through the random.git tree
for 5.19, so that I can then build on top of it.

Thanks,
Jason

Changes v5->v6:
- Use cpu_feature_enabled() instead of boot_cpu_has() on x86.
- OpenRISC support.
- Define missing `#define get_cycles get_cycles` on various platforms.

Changes v4->v5:
- Do not prototype symbol with 'extern', according to style guide.
- On MIPS, combine random_get_entropy_fallback() with the c0 random
  register in a way that matches the format of the c0 random value, so
  that we get the best of a high precision cycle counter and of larger
  period timer, joined together. As a result, Thomas Bogendoerfer's
  ack on v4 of patch 4 has been dropped, since this is a substantial
  change.

Changes v3->v4:
- Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Changes v2->v3:
- Name the fallback function random_get_entropy_fallback(), so that it
  can be changed out as needed.
- Include header with prototype in timekeeping.c to avoid compiler
  warning.
- Export fallback function symbol.

Changes v1->v2:
- Use ktime_read_raw_clock() instead of sched_clock(), per Thomas'
  suggestion.
- Drop arm64 change.
- Cleanup header inclusion ordering problem.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: x86@kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: openrisc@lists.librecores.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org

Jason A. Donenfeld (17):
  ia64: define get_cycles macro for arch-override
  s390: define get_cycles macro for arch-override
  parisc: define get_cycles macro for arch-override
  alpha: define get_cycles macro for arch-override
  powerpc: define get_cycles macro for arch-override
  timekeeping: add raw clock fallback for random_get_entropy()
  m68k: use fallback for random_get_entropy() instead of zero
  riscv: use fallback for random_get_entropy() instead of zero
  mips: use fallback for random_get_entropy() instead of just c0 random
  arm: use fallback for random_get_entropy() instead of zero
  openrisc: use fallback for random_get_entropy() instead of zero
  nios2: use fallback for random_get_entropy() instead of zero
  x86: use fallback for random_get_entropy() instead of zero
  um: use fallback for random_get_entropy() instead of zero
  sparc: use fallback for random_get_entropy() instead of zero
  xtensa: use fallback for random_get_entropy() instead of zero
  random: insist on random_get_entropy() existing in order to simplify

 arch/alpha/include/asm/timex.h    |  1 +
 arch/arm/include/asm/timex.h      |  1 +
 arch/ia64/include/asm/timex.h     |  1 +
 arch/m68k/include/asm/timex.h     |  2 +-
 arch/mips/include/asm/timex.h     | 17 +++---
 arch/nios2/include/asm/timex.h    |  3 ++
 arch/openrisc/include/asm/timex.h |  3 ++
 arch/parisc/include/asm/timex.h   |  3 +-
 arch/powerpc/include/asm/timex.h  |  1 +
 arch/riscv/include/asm/timex.h    |  2 +-
 arch/s390/include/asm/timex.h     |  1 +
 arch/sparc/include/asm/timex_32.h |  4 +-
 arch/um/include/asm/timex.h       |  9 +---
 arch/x86/include/asm/timex.h      | 10 ++++
 arch/x86/include/asm/tsc.h        |  4 +-
 arch/xtensa/include/asm/timex.h   |  6 +--
 drivers/char/random.c             | 89 ++++++++++---------------------
 include/linux/timex.h             |  8 +++
 kernel/time/timekeeping.c         | 10 ++++
 19 files changed, 87 insertions(+), 88 deletions(-)

-- 
2.35.1

[PATCH v6 00/17] archs/random: fallback to best raw ktime when no cycle counter

[Jason A. Donenfeld]

[Preface for v6: if you're an arch maintainer, a simple Acked-by would
 be appreciated if this looks okay.]

Hi folks,

The RNG uses a function called random_get_entropy() basically anytime
that it needs to timestamp an event. For example, an interrupt comes in,
and we mix a random_get_entropy() into the entropy pool somehow.
Somebody mashes their keyboard or moves their mouse around? We mix a
random_get_entropy() into the entropy pool. It's one of the main
varieties of input.

Unfortunately, it's always 0 on a few platforms. The RNG has accumulated
various hacks to deal with this, but in general it's not great. Surely
we can do better than 0. In fact, *anything* that's not the same exact
value all the time would be better than 0. Even a counter that
increments once per hour would be better than 0! I think you get the
idea.

On most platforms, random_get_entropy() is aliased to get_cycles(),
which makes sense for platforms where get_cycles() is defined. RDTSC,
for example, has all the characteristics we care about for this
function: it's fast to acquire (i.e. acceptable in an irq handler),
pretty high precision, available, forms a 2-monotone distribution, etc.
But for platforms without that, what is the next best thing?

Sometimes the next best thing is architecture-defined. For example,
really old MIPS has the C0 random register, which isn't quite a cycle
counter, but is at least something. However, some platforms don't even
have an architecture-defined fallback.

Fortunately, the timekeeping subsystem has already solved this problem
of trying to determine what the least bad clock is on constrained
systems, falling back to jiffies in the worst case. By exporting the raw
clock, we can get a decent fallback function for when there's no cycle
counter or architecture-specific function.

This series makes the RNG more useful on: m68k, RISC-V, MIPS, ARM32,
NIOS II, SPARC32, Xtensa, OpenRISC, and Usermode Linux. Previously these
platforms would, in certain circumstances, but out of luck with regards to
having any type of event timestamping source in the RNG.

Finally, note that this series isn't about "jitter entropy" or other
ways of initializing the RNG. That's a different topic for a different
thread. Please don't let this discussion veer off into that. Here, I'm
just trying to find a good fallback counter/timer for platforms without
get_cycles(), a question with limited scope.

If this (or a future revision) looks good to you all and receives the
requisite acks, my plan was to take these through the random.git tree
for 5.19, so that I can then build on top of it.

Thanks,
Jason

Changes v5->v6:
- Use cpu_feature_enabled() instead of boot_cpu_has() on x86.
- OpenRISC support.
- Define missing `#define get_cycles get_cycles` on various platforms.

Changes v4->v5:
- Do not prototype symbol with 'extern', according to style guide.
- On MIPS, combine random_get_entropy_fallback() with the c0 random
  register in a way that matches the format of the c0 random value, so
  that we get the best of a high precision cycle counter and of larger
  period timer, joined together. As a result, Thomas Bogendoerfer's
  ack on v4 of patch 4 has been dropped, since this is a substantial
  change.

Changes v3->v4:
- Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Changes v2->v3:
- Name the fallback function random_get_entropy_fallback(), so that it
  can be changed out as needed.
- Include header with prototype in timekeeping.c to avoid compiler
  warning.
- Export fallback function symbol.

Changes v1->v2:
- Use ktime_read_raw_clock() instead of sched_clock(), per Thomas'
  suggestion.
- Drop arm64 change.
- Cleanup header inclusion ordering problem.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: x86@kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: openrisc@lists.librecores.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org

Jason A. Donenfeld (17):
  ia64: define get_cycles macro for arch-override
  s390: define get_cycles macro for arch-override
  parisc: define get_cycles macro for arch-override
  alpha: define get_cycles macro for arch-override
  powerpc: define get_cycles macro for arch-override
  timekeeping: add raw clock fallback for random_get_entropy()
  m68k: use fallback for random_get_entropy() instead of zero
  riscv: use fallback for random_get_entropy() instead of zero
  mips: use fallback for random_get_entropy() instead of just c0 random
  arm: use fallback for random_get_entropy() instead of zero
  openrisc: use fallback for random_get_entropy() instead of zero
  nios2: use fallback for random_get_entropy() instead of zero
  x86: use fallback for random_get_entropy() instead of zero
  um: use fallback for random_get_entropy() instead of zero
  sparc: use fallback for random_get_entropy() instead of zero
  xtensa: use fallback for random_get_entropy() instead of zero
  random: insist on random_get_entropy() existing in order to simplify

 arch/alpha/include/asm/timex.h    |  1 +
 arch/arm/include/asm/timex.h      |  1 +
 arch/ia64/include/asm/timex.h     |  1 +
 arch/m68k/include/asm/timex.h     |  2 +-
 arch/mips/include/asm/timex.h     | 17 +++---
 arch/nios2/include/asm/timex.h    |  3 ++
 arch/openrisc/include/asm/timex.h |  3 ++
 arch/parisc/include/asm/timex.h   |  3 +-
 arch/powerpc/include/asm/timex.h  |  1 +
 arch/riscv/include/asm/timex.h    |  2 +-
 arch/s390/include/asm/timex.h     |  1 +
 arch/sparc/include/asm/timex_32.h |  4 +-
 arch/um/include/asm/timex.h       |  9 +---
 arch/x86/include/asm/timex.h      | 10 ++++
 arch/x86/include/asm/tsc.h        |  4 +-
 arch/xtensa/include/asm/timex.h   |  6 +--
 drivers/char/random.c             | 89 ++++++++++---------------------
 include/linux/timex.h             |  8 +++
 kernel/time/timekeeping.c         | 10 ++++
 19 files changed, 87 insertions(+), 88 deletions(-)

-- 
2.35.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 00/17] archs/random: fallback to best raw ktime when no cycle counter

[Jason A. Donenfeld]

[Preface for v6: if you're an arch maintainer, a simple Acked-by would
 be appreciated if this looks okay.]

Hi folks,

The RNG uses a function called random_get_entropy() basically anytime
that it needs to timestamp an event. For example, an interrupt comes in,
and we mix a random_get_entropy() into the entropy pool somehow.
Somebody mashes their keyboard or moves their mouse around? We mix a
random_get_entropy() into the entropy pool. It's one of the main
varieties of input.

Unfortunately, it's always 0 on a few platforms. The RNG has accumulated
various hacks to deal with this, but in general it's not great. Surely
we can do better than 0. In fact, *anything* that's not the same exact
value all the time would be better than 0. Even a counter that
increments once per hour would be better than 0! I think you get the
idea.

On most platforms, random_get_entropy() is aliased to get_cycles(),
which makes sense for platforms where get_cycles() is defined. RDTSC,
for example, has all the characteristics we care about for this
function: it's fast to acquire (i.e. acceptable in an irq handler),
pretty high precision, available, forms a 2-monotone distribution, etc.
But for platforms without that, what is the next best thing?

Sometimes the next best thing is architecture-defined. For example,
really old MIPS has the C0 random register, which isn't quite a cycle
counter, but is at least something. However, some platforms don't even
have an architecture-defined fallback.

Fortunately, the timekeeping subsystem has already solved this problem
of trying to determine what the least bad clock is on constrained
systems, falling back to jiffies in the worst case. By exporting the raw
clock, we can get a decent fallback function for when there's no cycle
counter or architecture-specific function.

This series makes the RNG more useful on: m68k, RISC-V, MIPS, ARM32,
NIOS II, SPARC32, Xtensa, OpenRISC, and Usermode Linux. Previously these
platforms would, in certain circumstances, but out of luck with regards to
having any type of event timestamping source in the RNG.

Finally, note that this series isn't about "jitter entropy" or other
ways of initializing the RNG. That's a different topic for a different
thread. Please don't let this discussion veer off into that. Here, I'm
just trying to find a good fallback counter/timer for platforms without
get_cycles(), a question with limited scope.

If this (or a future revision) looks good to you all and receives the
requisite acks, my plan was to take these through the random.git tree
for 5.19, so that I can then build on top of it.

Thanks,
Jason

Changes v5->v6:
- Use cpu_feature_enabled() instead of boot_cpu_has() on x86.
- OpenRISC support.
- Define missing `#define get_cycles get_cycles` on various platforms.

Changes v4->v5:
- Do not prototype symbol with 'extern', according to style guide.
- On MIPS, combine random_get_entropy_fallback() with the c0 random
  register in a way that matches the format of the c0 random value, so
  that we get the best of a high precision cycle counter and of larger
  period timer, joined together. As a result, Thomas Bogendoerfer's
  ack on v4 of patch 4 has been dropped, since this is a substantial
  change.

Changes v3->v4:
- Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Changes v2->v3:
- Name the fallback function random_get_entropy_fallback(), so that it
  can be changed out as needed.
- Include header with prototype in timekeeping.c to avoid compiler
  warning.
- Export fallback function symbol.

Changes v1->v2:
- Use ktime_read_raw_clock() instead of sched_clock(), per Thomas'
  suggestion.
- Drop arm64 change.
- Cleanup header inclusion ordering problem.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: x86@kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: openrisc@lists.librecores.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org

Jason A. Donenfeld (17):
  ia64: define get_cycles macro for arch-override
  s390: define get_cycles macro for arch-override
  parisc: define get_cycles macro for arch-override
  alpha: define get_cycles macro for arch-override
  powerpc: define get_cycles macro for arch-override
  timekeeping: add raw clock fallback for random_get_entropy()
  m68k: use fallback for random_get_entropy() instead of zero
  riscv: use fallback for random_get_entropy() instead of zero
  mips: use fallback for random_get_entropy() instead of just c0 random
  arm: use fallback for random_get_entropy() instead of zero
  openrisc: use fallback for random_get_entropy() instead of zero
  nios2: use fallback for random_get_entropy() instead of zero
  x86: use fallback for random_get_entropy() instead of zero
  um: use fallback for random_get_entropy() instead of zero
  sparc: use fallback for random_get_entropy() instead of zero
  xtensa: use fallback for random_get_entropy() instead of zero
  random: insist on random_get_entropy() existing in order to simplify

 arch/alpha/include/asm/timex.h    |  1 +
 arch/arm/include/asm/timex.h      |  1 +
 arch/ia64/include/asm/timex.h     |  1 +
 arch/m68k/include/asm/timex.h     |  2 +-
 arch/mips/include/asm/timex.h     | 17 +++---
 arch/nios2/include/asm/timex.h    |  3 ++
 arch/openrisc/include/asm/timex.h |  3 ++
 arch/parisc/include/asm/timex.h   |  3 +-
 arch/powerpc/include/asm/timex.h  |  1 +
 arch/riscv/include/asm/timex.h    |  2 +-
 arch/s390/include/asm/timex.h     |  1 +
 arch/sparc/include/asm/timex_32.h |  4 +-
 arch/um/include/asm/timex.h       |  9 +---
 arch/x86/include/asm/timex.h      | 10 ++++
 arch/x86/include/asm/tsc.h        |  4 +-
 arch/xtensa/include/asm/timex.h   |  6 +--
 drivers/char/random.c             | 89 ++++++++++---------------------
 include/linux/timex.h             |  8 +++
 kernel/time/timekeeping.c         | 10 ++++
 19 files changed, 87 insertions(+), 88 deletions(-)

-- 
2.35.1

[OpenRISC] [PATCH v6 00/17] archs/random: fallback to best raw ktime when no cycle counter

[Jason A. Donenfeld]

[Preface for v6: if you're an arch maintainer, a simple Acked-by would
 be appreciated if this looks okay.]

Hi folks,

The RNG uses a function called random_get_entropy() basically anytime
that it needs to timestamp an event. For example, an interrupt comes in,
and we mix a random_get_entropy() into the entropy pool somehow.
Somebody mashes their keyboard or moves their mouse around? We mix a
random_get_entropy() into the entropy pool. It's one of the main
varieties of input.

Unfortunately, it's always 0 on a few platforms. The RNG has accumulated
various hacks to deal with this, but in general it's not great. Surely
we can do better than 0. In fact, *anything* that's not the same exact
value all the time would be better than 0. Even a counter that
increments once per hour would be better than 0! I think you get the
idea.

On most platforms, random_get_entropy() is aliased to get_cycles(),
which makes sense for platforms where get_cycles() is defined. RDTSC,
for example, has all the characteristics we care about for this
function: it's fast to acquire (i.e. acceptable in an irq handler),
pretty high precision, available, forms a 2-monotone distribution, etc.
But for platforms without that, what is the next best thing?

Sometimes the next best thing is architecture-defined. For example,
really old MIPS has the C0 random register, which isn't quite a cycle
counter, but is at least something. However, some platforms don't even
have an architecture-defined fallback.

Fortunately, the timekeeping subsystem has already solved this problem
of trying to determine what the least bad clock is on constrained
systems, falling back to jiffies in the worst case. By exporting the raw
clock, we can get a decent fallback function for when there's no cycle
counter or architecture-specific function.

This series makes the RNG more useful on: m68k, RISC-V, MIPS, ARM32,
NIOS II, SPARC32, Xtensa, OpenRISC, and Usermode Linux. Previously these
platforms would, in certain circumstances, but out of luck with regards to
having any type of event timestamping source in the RNG.

Finally, note that this series isn't about "jitter entropy" or other
ways of initializing the RNG. That's a different topic for a different
thread. Please don't let this discussion veer off into that. Here, I'm
just trying to find a good fallback counter/timer for platforms without
get_cycles(), a question with limited scope.

If this (or a future revision) looks good to you all and receives the
requisite acks, my plan was to take these through the random.git tree
for 5.19, so that I can then build on top of it.

Thanks,
Jason

Changes v5->v6:
- Use cpu_feature_enabled() instead of boot_cpu_has() on x86.
- OpenRISC support.
- Define missing `#define get_cycles get_cycles` on various platforms.

Changes v4->v5:
- Do not prototype symbol with 'extern', according to style guide.
- On MIPS, combine random_get_entropy_fallback() with the c0 random
  register in a way that matches the format of the c0 random value, so
  that we get the best of a high precision cycle counter and of larger
  period timer, joined together. As a result, Thomas Bogendoerfer's
  ack on v4 of patch 4 has been dropped, since this is a substantial
  change.

Changes v3->v4:
- Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Changes v2->v3:
- Name the fallback function random_get_entropy_fallback(), so that it
  can be changed out as needed.
- Include header with prototype in timekeeping.c to avoid compiler
  warning.
- Export fallback function symbol.

Changes v1->v2:
- Use ktime_read_raw_clock() instead of sched_clock(), per Thomas'
  suggestion.
- Drop arm64 change.
- Cleanup header inclusion ordering problem.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-m68k at lists.linux-m68k.org
Cc: linux-mips at vger.kernel.org
Cc: linux-riscv at lists.infradead.org
Cc: sparclinux at vger.kernel.org
Cc: linux-um at lists.infradead.org
Cc: x86 at kernel.org
Cc: linux-xtensa at linux-xtensa.org
Cc: openrisc at lists.librecores.org
Cc: linux-ia64 at vger.kernel.org
Cc: linux-s390 at vger.kernel.org
Cc: linux-parisc at vger.kernel.org
Cc: linuxppc-dev at lists.ozlabs.org

Jason A. Donenfeld (17):
  ia64: define get_cycles macro for arch-override
  s390: define get_cycles macro for arch-override
  parisc: define get_cycles macro for arch-override
  alpha: define get_cycles macro for arch-override
  powerpc: define get_cycles macro for arch-override
  timekeeping: add raw clock fallback for random_get_entropy()
  m68k: use fallback for random_get_entropy() instead of zero
  riscv: use fallback for random_get_entropy() instead of zero
  mips: use fallback for random_get_entropy() instead of just c0 random
  arm: use fallback for random_get_entropy() instead of zero
  openrisc: use fallback for random_get_entropy() instead of zero
  nios2: use fallback for random_get_entropy() instead of zero
  x86: use fallback for random_get_entropy() instead of zero
  um: use fallback for random_get_entropy() instead of zero
  sparc: use fallback for random_get_entropy() instead of zero
  xtensa: use fallback for random_get_entropy() instead of zero
  random: insist on random_get_entropy() existing in order to simplify

 arch/alpha/include/asm/timex.h    |  1 +
 arch/arm/include/asm/timex.h      |  1 +
 arch/ia64/include/asm/timex.h     |  1 +
 arch/m68k/include/asm/timex.h     |  2 +-
 arch/mips/include/asm/timex.h     | 17 +++---
 arch/nios2/include/asm/timex.h    |  3 ++
 arch/openrisc/include/asm/timex.h |  3 ++
 arch/parisc/include/asm/timex.h   |  3 +-
 arch/powerpc/include/asm/timex.h  |  1 +
 arch/riscv/include/asm/timex.h    |  2 +-
 arch/s390/include/asm/timex.h     |  1 +
 arch/sparc/include/asm/timex_32.h |  4 +-
 arch/um/include/asm/timex.h       |  9 +---
 arch/x86/include/asm/timex.h      | 10 ++++
 arch/x86/include/asm/tsc.h        |  4 +-
 arch/xtensa/include/asm/timex.h   |  6 +--
 drivers/char/random.c             | 89 ++++++++++---------------------
 include/linux/timex.h             |  8 +++
 kernel/time/timekeeping.c         | 10 ++++
 19 files changed, 87 insertions(+), 88 deletions(-)

-- 
2.35.1

[PATCH v6 00/17] archs/random: fallback to best raw ktime when no cycle counter

[Jason A. Donenfeld]

[Preface for v6: if you're an arch maintainer, a simple Acked-by would
 be appreciated if this looks okay.]

Hi folks,

The RNG uses a function called random_get_entropy() basically anytime
that it needs to timestamp an event. For example, an interrupt comes in,
and we mix a random_get_entropy() into the entropy pool somehow.
Somebody mashes their keyboard or moves their mouse around? We mix a
random_get_entropy() into the entropy pool. It's one of the main
varieties of input.

Unfortunately, it's always 0 on a few platforms. The RNG has accumulated
various hacks to deal with this, but in general it's not great. Surely
we can do better than 0. In fact, *anything* that's not the same exact
value all the time would be better than 0. Even a counter that
increments once per hour would be better than 0! I think you get the
idea.

On most platforms, random_get_entropy() is aliased to get_cycles(),
which makes sense for platforms where get_cycles() is defined. RDTSC,
for example, has all the characteristics we care about for this
function: it's fast to acquire (i.e. acceptable in an irq handler),
pretty high precision, available, forms a 2-monotone distribution, etc.
But for platforms without that, what is the next best thing?

Sometimes the next best thing is architecture-defined. For example,
really old MIPS has the C0 random register, which isn't quite a cycle
counter, but is at least something. However, some platforms don't even
have an architecture-defined fallback.

Fortunately, the timekeeping subsystem has already solved this problem
of trying to determine what the least bad clock is on constrained
systems, falling back to jiffies in the worst case. By exporting the raw
clock, we can get a decent fallback function for when there's no cycle
counter or architecture-specific function.

This series makes the RNG more useful on: m68k, RISC-V, MIPS, ARM32,
NIOS II, SPARC32, Xtensa, OpenRISC, and Usermode Linux. Previously these
platforms would, in certain circumstances, but out of luck with regards to
having any type of event timestamping source in the RNG.

Finally, note that this series isn't about "jitter entropy" or other
ways of initializing the RNG. That's a different topic for a different
thread. Please don't let this discussion veer off into that. Here, I'm
just trying to find a good fallback counter/timer for platforms without
get_cycles(), a question with limited scope.

If this (or a future revision) looks good to you all and receives the
requisite acks, my plan was to take these through the random.git tree
for 5.19, so that I can then build on top of it.

Thanks,
Jason

Changes v5->v6:
- Use cpu_feature_enabled() instead of boot_cpu_has() on x86.
- OpenRISC support.
- Define missing `#define get_cycles get_cycles` on various platforms.

Changes v4->v5:
- Do not prototype symbol with 'extern', according to style guide.
- On MIPS, combine random_get_entropy_fallback() with the c0 random
  register in a way that matches the format of the c0 random value, so
  that we get the best of a high precision cycle counter and of larger
  period timer, joined together. As a result, Thomas Bogendoerfer's
  ack on v4 of patch 4 has been dropped, since this is a substantial
  change.

Changes v3->v4:
- Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Changes v2->v3:
- Name the fallback function random_get_entropy_fallback(), so that it
  can be changed out as needed.
- Include header with prototype in timekeeping.c to avoid compiler
  warning.
- Export fallback function symbol.

Changes v1->v2:
- Use ktime_read_raw_clock() instead of sched_clock(), per Thomas'
  suggestion.
- Drop arm64 change.
- Cleanup header inclusion ordering problem.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: x86@kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: openrisc@lists.librecores.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org

Jason A. Donenfeld (17):
  ia64: define get_cycles macro for arch-override
  s390: define get_cycles macro for arch-override
  parisc: define get_cycles macro for arch-override
  alpha: define get_cycles macro for arch-override
  powerpc: define get_cycles macro for arch-override
  timekeeping: add raw clock fallback for random_get_entropy()
  m68k: use fallback for random_get_entropy() instead of zero
  riscv: use fallback for random_get_entropy() instead of zero
  mips: use fallback for random_get_entropy() instead of just c0 random
  arm: use fallback for random_get_entropy() instead of zero
  openrisc: use fallback for random_get_entropy() instead of zero
  nios2: use fallback for random_get_entropy() instead of zero
  x86: use fallback for random_get_entropy() instead of zero
  um: use fallback for random_get_entropy() instead of zero
  sparc: use fallback for random_get_entropy() instead of zero
  xtensa: use fallback for random_get_entropy() instead of zero
  random: insist on random_get_entropy() existing in order to simplify

 arch/alpha/include/asm/timex.h    |  1 +
 arch/arm/include/asm/timex.h      |  1 +
 arch/ia64/include/asm/timex.h     |  1 +
 arch/m68k/include/asm/timex.h     |  2 +-
 arch/mips/include/asm/timex.h     | 17 +++---
 arch/nios2/include/asm/timex.h    |  3 ++
 arch/openrisc/include/asm/timex.h |  3 ++
 arch/parisc/include/asm/timex.h   |  3 +-
 arch/powerpc/include/asm/timex.h  |  1 +
 arch/riscv/include/asm/timex.h    |  2 +-
 arch/s390/include/asm/timex.h     |  1 +
 arch/sparc/include/asm/timex_32.h |  4 +-
 arch/um/include/asm/timex.h       |  9 +---
 arch/x86/include/asm/timex.h      | 10 ++++
 arch/x86/include/asm/tsc.h        |  4 +-
 arch/xtensa/include/asm/timex.h   |  6 +--
 drivers/char/random.c             | 89 ++++++++++---------------------
 include/linux/timex.h             |  8 +++
 kernel/time/timekeeping.c         | 10 ++++
 19 files changed, 87 insertions(+), 88 deletions(-)

-- 
2.35.1

[PATCH v6 01/17] ia64: define get_cycles macro for arch-override

[Jason A. Donenfeld]

Itanium defines a get_cycles() function, but it forgot to do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/ia64/include/asm/timex.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h
index 869a3ac6bf23..7ccc077a60be 100644
--- a/arch/ia64/include/asm/timex.h
+++ b/arch/ia64/include/asm/timex.h
@@ -39,6 +39,7 @@ get_cycles (void)
 	ret = ia64_getreg(_IA64_REG_AR_ITC);
 	return ret;
 }
+#define get_cycles get_cycles
 
 extern void ia64_cpu_local_tick (void);
 extern unsigned long long ia64_native_sched_clock (void);
-- 
2.35.1

[PATCH v6 02/17] s390: define get_cycles macro for arch-override

[Jason A. Donenfeld]

S390x defines a get_cycles() function, but it forgot to do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/s390/include/asm/timex.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 2cfce42aa7fc..ce878e85b6e4 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -197,6 +197,7 @@ static inline cycles_t get_cycles(void)
 {
 	return (cycles_t) get_tod_clock() >> 2;
 }
+#define get_cycles get_cycles
 
 int get_phys_clock(unsigned long *clock);
 void init_cpu_timer(void);
-- 
2.35.1

[PATCH v6 03/17] parisc: define get_cycles macro for arch-override

[Jason A. Donenfeld]

PA-RISC defines a get_cycles() function, but it forgot to do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/parisc/include/asm/timex.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/parisc/include/asm/timex.h b/arch/parisc/include/asm/timex.h
index 06b510f8172e..b4622cb06a75 100644
--- a/arch/parisc/include/asm/timex.h
+++ b/arch/parisc/include/asm/timex.h
@@ -13,9 +13,10 @@
 
 typedef unsigned long cycles_t;
 
-static inline cycles_t get_cycles (void)
+static inline cycles_t get_cycles(void)
 {
 	return mfctl(16);
 }
+#define get_cycles get_cycles
 
 #endif
-- 
2.35.1

[PATCH v6 04/17] alpha: define get_cycles macro for arch-override

[Jason A. Donenfeld]

Alpha defines a get_cycles() function, but it forgot to do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/alpha/include/asm/timex.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/alpha/include/asm/timex.h b/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- a/arch/alpha/include/asm/timex.h
+++ b/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
-- 
2.35.1

[PATCH v6 05/17] powerpc: define get_cycles macro for arch-override

[Jason A. Donenfeld]

PowerPC defines a get_cycles() function, but it forgot to do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/powerpc/include/asm/timex.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
index fa2e76e4093a..14b4489de52c 100644
--- a/arch/powerpc/include/asm/timex.h
+++ b/arch/powerpc/include/asm/timex.h
@@ -19,6 +19,7 @@ static inline cycles_t get_cycles(void)
 {
 	return mftb();
 }
+#define get_cycles get_cycles
 
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_TIMEX_H */
-- 
2.35.1

[PATCH v6 05/17] powerpc: define get_cycles macro for arch-override

[Jason A. Donenfeld]

PowerPC defines a get_cycles() function, but it forgot to do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/powerpc/include/asm/timex.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
index fa2e76e4093a..14b4489de52c 100644
--- a/arch/powerpc/include/asm/timex.h
+++ b/arch/powerpc/include/asm/timex.h
@@ -19,6 +19,7 @@ static inline cycles_t get_cycles(void)
 {
 	return mftb();
 }
+#define get_cycles get_cycles
 
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_TIMEX_H */
-- 
2.35.1

[PATCH v6 06/17] timekeeping: add raw clock fallback for random_get_entropy()

[Jason A. Donenfeld]

The addition of random_get_entropy_fallback() provides access to
whichever time source has the highest frequency, which is useful for
gathering entropy on platforms without available cycle counters. It's
not necessarily as good as being able to quickly access a cycle counter
that the CPU has, but it's still something, even when it falls back to
being jiffies-based.

In the event that a given arch does not define get_cycles(), falling
back to the get_cycles() default implementation that returns 0 is really
not the best we can do. Instead, at least calling
random_get_entropy_fallback() would be preferable, because that always
needs to return _something_, even falling back to jiffies eventually.
It's not as though random_get_entropy_fallback() is super high precision
or guaranteed to be entropic, but basically anything that's not zero all
the time is better than returning zero all the time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 include/linux/timex.h     |  8 ++++++++
 kernel/time/timekeeping.c | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/include/linux/timex.h b/include/linux/timex.h
index 5745c90c8800..3871b06bd302 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -62,6 +62,8 @@
 #include <linux/types.h>
 #include <linux/param.h>
 
+unsigned long random_get_entropy_fallback(void);
+
 #include <asm/timex.h>
 
 #ifndef random_get_entropy
@@ -74,8 +76,14 @@
  *
  * By default we use get_cycles() for this purpose, but individual
  * architectures may override this in their asm/timex.h header file.
+ * If a given arch does not have get_cycles(), then we fallback to
+ * using random_get_entropy_fallback().
  */
+#ifdef get_cycles
 #define random_get_entropy()	((unsigned long)get_cycles())
+#else
+#define random_get_entropy()	random_get_entropy_fallback()
+#endif
 #endif
 
 /*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index dcdcb85121e4..7cd2ec239cae 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -17,6 +17,7 @@
 #include <linux/clocksource.h>
 #include <linux/jiffies.h>
 #include <linux/time.h>
+#include <linux/timex.h>
 #include <linux/tick.h>
 #include <linux/stop_machine.h>
 #include <linux/pvclock_gtod.h>
@@ -2380,6 +2381,15 @@ static int timekeeping_validate_timex(const struct __kernel_timex *txc)
 	return 0;
 }
 
+/**
+ * random_get_entropy_fallback - Returns the raw clock source value,
+ * used by random.c for platforms with no valid random_get_entropy().
+ */
+unsigned long random_get_entropy_fallback(void)
+{
+	return tk_clock_read(&tk_core.timekeeper.tkr_mono);
+}
+EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
 
 /**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function
-- 
2.35.1

[PATCH v6 07/17] m68k: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/m68k/include/asm/timex.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
index 6a21d9358280..f4a7a340f4ca 100644
--- a/arch/m68k/include/asm/timex.h
+++ b/arch/m68k/include/asm/timex.h
@@ -35,7 +35,7 @@ static inline unsigned long random_get_entropy(void)
 {
 	if (mach_random_get_entropy)
 		return mach_random_get_entropy();
-	return 0;
+	return random_get_entropy_fallback();
 }
 #define random_get_entropy	random_get_entropy
 
-- 
2.35.1

[PATCH v6 08/17] riscv: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/riscv/include/asm/timex.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index 507cae273bc6..d6a7428f6248 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -41,7 +41,7 @@ static inline u32 get_cycles_hi(void)
 static inline unsigned long random_get_entropy(void)
 {
 	if (unlikely(clint_time_val == NULL))
-		return 0;
+		return random_get_entropy_fallback();
 	return get_cycles();
 }
 #define random_get_entropy()	random_get_entropy()
-- 
2.35.1

[PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Jason A. Donenfeld]

For situations in which we don't have a c0 counter register available,
we've been falling back to reading the c0 "random" register, which is
usually bounded by the amount of TLB entries and changes every other
cycle or so. This means it wraps extremely often. We can do better by
combining this fast-changing counter with a potentially slower-changing
counter from random_get_entropy_fallback() in the more significant bits.
This commit combines the two, taking into account that the changing bits
are in a different bit position depending on the CPU model. In addition,
we previously were falling back to 0 for ancient CPUs that Linux does
not support anyway; remove that dead path entirely.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/mips/include/asm/timex.h | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
index b05bb70a2e46..8cfa485d19e6 100644
--- a/arch/mips/include/asm/timex.h
+++ b/arch/mips/include/asm/timex.h
@@ -76,25 +76,24 @@ static inline cycles_t get_cycles(void)
 	else
 		return 0;	/* no usable counter */
 }
+#define get_cycles get_cycles
 
 /*
  * Like get_cycles - but where c0_count is not available we desperately
  * use c0_random in an attempt to get at least a little bit of entropy.
- *
- * R6000 and R6000A neither have a count register nor a random register.
- * That leaves no entropy source in the CPU itself.
  */
 static inline unsigned long random_get_entropy(void)
 {
-	unsigned int prid = read_c0_prid();
-	unsigned int imp = prid & PRID_IMP_MASK;
+	unsigned int c0_random;
 
-	if (can_use_mips_counter(prid))
+	if (can_use_mips_counter(read_c0_prid()))
 		return read_c0_count();
-	else if (likely(imp != PRID_IMP_R6000 && imp != PRID_IMP_R6000A))
-		return read_c0_random();
+
+	if (cpu_has_3kex)
+		c0_random = (read_c0_random() >> 8) & 0x3f;
 	else
-		return 0;	/* no usable register */
+		c0_random = read_c0_random() & 0x3f;
+	return (random_get_entropy_fallback() << 6) | (0x3f - c0_random);
 }
 #define random_get_entropy random_get_entropy
 
-- 
2.35.1

[PATCH v6 10/17] arm: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/arm/include/asm/timex.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 7c3b3671d6c2..6d1337c169cd 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -11,5 +11,6 @@
 
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
-- 
2.35.1

[PATCH v6 11/17] openrisc: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/openrisc/include/asm/timex.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
index d52b4e536e3f..115e89b336cd 100644
--- a/arch/openrisc/include/asm/timex.h
+++ b/arch/openrisc/include/asm/timex.h
@@ -23,6 +23,9 @@ static inline cycles_t get_cycles(void)
 {
 	return mfspr(SPR_TTCR);
 }
+#define get_cycles get_cycles
+
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 /* This isn't really used any more */
 #define CLOCK_TICK_RATE 1000
-- 
2.35.1

[PATCH v6 12/17] nios2: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/nios2/include/asm/timex.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/nios2/include/asm/timex.h b/arch/nios2/include/asm/timex.h
index a769f871b28d..40a1adc9bd03 100644
--- a/arch/nios2/include/asm/timex.h
+++ b/arch/nios2/include/asm/timex.h
@@ -8,5 +8,8 @@
 typedef unsigned long cycles_t;
 
 extern cycles_t get_cycles(void);
+#define get_cycles get_cycles
+
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
-- 
2.35.1

[PATCH v6 13/17] x86: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

If CONFIG_X86_TSC=n, then it's possible that we're running on a 486 with
no RDTSC, so we only need the fallback code for that case. While we're
at it, fix up both the new function and the get_cycles() function from
which its derived to use cpu_feature_enabled() rather than boot_cpu_has().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/x86/include/asm/timex.h | 10 ++++++++++
 arch/x86/include/asm/tsc.h   |  4 ++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index a4a8b1b16c0c..2b841c39d876 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -5,6 +5,16 @@
 #include <asm/processor.h>
 #include <asm/tsc.h>
 
+static inline unsigned long random_get_entropy(void)
+{
+#ifndef CONFIG_X86_TSC
+	if (!cpu_feature_enabled(X86_FEATURE_TSC))
+		return random_get_entropy_fallback();
+#endif
+	return rdtsc();
+}
+#define random_get_entropy random_get_entropy
+
 /* Assume we use the PIT time source for the clock tick */
 #define CLOCK_TICK_RATE		PIT_TICK_RATE
 
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 01a300a9700b..192ea48ec80b 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -21,12 +21,12 @@ extern void disable_TSC(void);
 static inline cycles_t get_cycles(void)
 {
 #ifndef CONFIG_X86_TSC
-	if (!boot_cpu_has(X86_FEATURE_TSC))
+	if (!cpu_feature_enabled(X86_FEATURE_TSC))
 		return 0;
 #endif
-
 	return rdtsc();
 }
+#define get_cycles get_cycles
 
 extern struct system_counterval_t convert_art_to_tsc(u64 art);
 extern struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns);
-- 
2.35.1

[PATCH v6 14/17] um: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

This is accomplished by just including the asm-generic code like on
other architectures, which means we can get rid of the empty stub
function here.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/um/include/asm/timex.h | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/um/include/asm/timex.h b/arch/um/include/asm/timex.h
index e392a9a5bc9b..9f27176adb26 100644
--- a/arch/um/include/asm/timex.h
+++ b/arch/um/include/asm/timex.h
@@ -2,13 +2,8 @@
 #ifndef __UM_TIMEX_H
 #define __UM_TIMEX_H
 
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-	return 0;
-}
-
 #define CLOCK_TICK_RATE (HZ)
 
+#include <asm-generic/timex.h>
+
 #endif
-- 
2.35.1

[PATCH v6 15/17] sparc: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

This is accomplished by just including the asm-generic code like on
other architectures, which means we can get rid of the empty stub
function here.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/sparc/include/asm/timex_32.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
index 542915b46209..f86326a6f89e 100644
--- a/arch/sparc/include/asm/timex_32.h
+++ b/arch/sparc/include/asm/timex_32.h
@@ -9,8 +9,6 @@
 
 #define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
 
-/* XXX Maybe do something better at some point... -DaveM */
-typedef unsigned long cycles_t;
-#define get_cycles()	(0)
+#include <asm-generic/timex.h>
 
 #endif
-- 
2.35.1

[PATCH v6 16/17] xtensa: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.

This is accomplished by just including the asm-generic code like on
other architectures, which means we can get rid of the empty stub
function here.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 arch/xtensa/include/asm/timex.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index 233ec75e60c6..3f2462f2d027 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -29,10 +29,6 @@
 
 extern unsigned long ccount_freq;
 
-typedef unsigned long long cycles_t;
-
-#define get_cycles()	(0)
-
 void local_timer_setup(unsigned cpu);
 
 /*
@@ -59,4 +55,6 @@ static inline void set_linux_timer (unsigned long ccompare)
 	xtensa_set_sr(ccompare, SREG_CCOMPARE + LINUX_TIMER);
 }
 
+#include <asm-generic/timex.h>
+
 #endif	/* _XTENSA_TIMEX_H */
-- 
2.35.1

[PATCH v6 17/17] random: insist on random_get_entropy() existing in order to simplify

[Jason A. Donenfeld]

All platforms are now guaranteed to provide some value for
random_get_entropy(). In case some bug leads to this not being so, we
print a warning, because that indicates that something is really very
wrong (and likely other things are impacted too). This should never be
hit, but it's a good and cheap way of finding out if something ever is
problematic.

Since we now have viable fallback code for random_get_entropy() on all
platforms, which is, in the worst case, not worse than jiffies, we can
count on getting the best possible value out of it. That means there's
no longer a use for using jiffies as entropy input. It also means we no
longer have a reason for doing the round-robin register flow in the IRQ
handler, which was always of fairly dubious value.

Instead we can greatly simplify the IRQ handler inputs and also unify
the construction between 64-bits and 32-bits. We now collect the cycle
counter and the return address, since those are the two things that
matter. Because the return address and the irq number are likely
related, to the extent we mix in the irq number, we can just xor it into
the top unchanging bytes of the return address, rather than the bottom
changing bytes of the cycle counter as before. Then, we can do a fixed 2
rounds of SipHash/HSipHash. Finally, we use the same construction of
hashing only half of the [H]SipHash state on 32-bit and 64-bit. We're
not actually discarding any entropy, since that entropy is carried
through until the next time. And more importantly, it lets us do the
same sponge-like construction everywhere.

Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 drivers/char/random.c | 89 ++++++++++++++-----------------------------
 1 file changed, 29 insertions(+), 60 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 4c9adb4f3d5d..bf89c6f27a19 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1012,6 +1012,9 @@ int __init rand_initialize(void)
 		urandom_warning.interval = 0;
 		unseeded_warning.interval = 0;
 	}
+
+	WARN(!random_get_entropy(), "Missing cycle counter and fallback timer; RNG "
+				    "entropy collection will consequently suffer.");
 	return 0;
 }
 
@@ -1025,15 +1028,14 @@ int __init rand_initialize(void)
  */
 void add_device_randomness(const void *buf, size_t size)
 {
-	unsigned long cycles = random_get_entropy();
-	unsigned long flags, now = jiffies;
+	unsigned long entropy = random_get_entropy();
+	unsigned long flags;
 
 	if (crng_init == 0 && size)
 		crng_pre_init_inject(buf, size, false);
 
 	spin_lock_irqsave(&input_pool.lock, flags);
-	_mix_pool_bytes(&cycles, sizeof(cycles));
-	_mix_pool_bytes(&now, sizeof(now));
+	_mix_pool_bytes(&entropy, sizeof(entropy));
 	_mix_pool_bytes(buf, size);
 	spin_unlock_irqrestore(&input_pool.lock, flags);
 }
@@ -1056,12 +1058,11 @@ struct timer_rand_state {
  */
 static void add_timer_randomness(struct timer_rand_state *state, unsigned int num)
 {
-	unsigned long cycles = random_get_entropy(), now = jiffies, flags;
+	unsigned long entropy = random_get_entropy(), now = jiffies, flags;
 	long delta, delta2, delta3;
 
 	spin_lock_irqsave(&input_pool.lock, flags);
-	_mix_pool_bytes(&cycles, sizeof(cycles));
-	_mix_pool_bytes(&now, sizeof(now));
+	_mix_pool_bytes(&entropy, sizeof(entropy));
 	_mix_pool_bytes(&num, sizeof(num));
 	spin_unlock_irqrestore(&input_pool.lock, flags);
 
@@ -1223,7 +1224,6 @@ struct fast_pool {
 	unsigned long pool[4];
 	unsigned long last;
 	unsigned int count;
-	u16 reg_idx;
 };
 
 static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = {
@@ -1241,13 +1241,13 @@ static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = {
  * This is [Half]SipHash-1-x, starting from an empty key. Because
  * the key is fixed, it assumes that its inputs are non-malicious,
  * and therefore this has no security on its own. s represents the
- * 128 or 256-bit SipHash state, while v represents a 128-bit input.
+ * four-word SipHash state, while v represents a two-word input.
  */
-static void fast_mix(unsigned long s[4], const unsigned long *v)
+static void fast_mix(unsigned long s[4], const unsigned long v[2])
 {
 	size_t i;
 
-	for (i = 0; i < 16 / sizeof(long); ++i) {
+	for (i = 0; i < 2; ++i) {
 		s[3] ^= v[i];
 #ifdef CONFIG_64BIT
 		s[0] += s[1]; s[1] = rol64(s[1], 13); s[1] ^= s[0]; s[0] = rol64(s[0], 32);
@@ -1287,33 +1287,17 @@ int random_online_cpu(unsigned int cpu)
 }
 #endif
 
-static unsigned long get_reg(struct fast_pool *f, struct pt_regs *regs)
-{
-	unsigned long *ptr = (unsigned long *)regs;
-	unsigned int idx;
-
-	if (regs == NULL)
-		return 0;
-	idx = READ_ONCE(f->reg_idx);
-	if (idx >= sizeof(struct pt_regs) / sizeof(unsigned long))
-		idx = 0;
-	ptr += idx++;
-	WRITE_ONCE(f->reg_idx, idx);
-	return *ptr;
-}
-
 static void mix_interrupt_randomness(struct work_struct *work)
 {
 	struct fast_pool *fast_pool = container_of(work, struct fast_pool, mix);
 	/*
-	 * The size of the copied stack pool is explicitly 16 bytes so that we
-	 * tax mix_pool_byte()'s compression function the same amount on all
-	 * platforms. This means on 64-bit we copy half the pool into this,
-	 * while on 32-bit we copy all of it. The entropy is supposed to be
-	 * sufficiently dispersed between bits that in the sponge-like
-	 * half case, on average we don't wind up "losing" some.
+	 * The size of the copied stack pool is explicitly 2 longs so that we
+	 * only ever ingest half of the siphash output each time, retaining
+	 * the other half as the next "key" that carries over. The entropy is
+	 * supposed to be sufficiently dispersed between bits so on average
+	 * we don't wind up "losing" some.
 	 */
-	u8 pool[16];
+	unsigned long pool[2];
 
 	/* Check to see if we're running on the wrong CPU due to hotplug. */
 	local_irq_disable();
@@ -1345,36 +1329,21 @@ static void mix_interrupt_randomness(struct work_struct *work)
 void add_interrupt_randomness(int irq)
 {
 	enum { MIX_INFLIGHT = 1U << 31 };
-	unsigned long cycles = random_get_entropy(), now = jiffies;
+	unsigned long cycles = random_get_entropy();
 	struct fast_pool *fast_pool = this_cpu_ptr(&irq_randomness);
 	struct pt_regs *regs = get_irq_regs();
 	unsigned int new_count;
-	union {
-		u32 u32[4];
-		u64 u64[2];
-		unsigned long longs[16 / sizeof(long)];
-	} irq_data;
-
-	if (cycles == 0)
-		cycles = get_reg(fast_pool, regs);
-
-	if (sizeof(unsigned long) == 8) {
-		irq_data.u64[0] = cycles ^ rol64(now, 32) ^ irq;
-		irq_data.u64[1] = regs ? instruction_pointer(regs) : _RET_IP_;
-	} else {
-		irq_data.u32[0] = cycles ^ irq;
-		irq_data.u32[1] = now;
-		irq_data.u32[2] = regs ? instruction_pointer(regs) : _RET_IP_;
-		irq_data.u32[3] = get_reg(fast_pool, regs);
-	}
 
-	fast_mix(fast_pool->pool, irq_data.longs);
+	fast_mix(fast_pool->pool, (unsigned long[2]){
+		(regs ? instruction_pointer(regs) : _RET_IP_) ^ swab(irq),
+		cycles
+	});
 	new_count = ++fast_pool->count;
 
 	if (new_count & MIX_INFLIGHT)
 		return;
 
-	if (new_count < 64 && (!time_after(now, fast_pool->last + HZ) ||
+	if (new_count < 64 && (!time_is_before_jiffies(fast_pool->last + HZ) ||
 			       unlikely(crng_init == 0)))
 		return;
 
@@ -1410,28 +1379,28 @@ static void entropy_timer(struct timer_list *t)
 static void try_to_generate_entropy(void)
 {
 	struct {
-		unsigned long cycles;
+		unsigned long entropy;
 		struct timer_list timer;
 	} stack;
 
-	stack.cycles = random_get_entropy();
+	stack.entropy = random_get_entropy();
 
 	/* Slow counter - or none. Don't even bother */
-	if (stack.cycles == random_get_entropy())
+	if (stack.entropy == random_get_entropy())
 		return;
 
 	timer_setup_on_stack(&stack.timer, entropy_timer, 0);
 	while (!crng_ready() && !signal_pending(current)) {
 		if (!timer_pending(&stack.timer))
 			mod_timer(&stack.timer, jiffies + 1);
-		mix_pool_bytes(&stack.cycles, sizeof(stack.cycles));
+		mix_pool_bytes(&stack.entropy, sizeof(stack.entropy));
 		schedule();
-		stack.cycles = random_get_entropy();
+		stack.entropy = random_get_entropy();
 	}
 
 	del_timer_sync(&stack.timer);
 	destroy_timer_on_stack(&stack.timer);
-	mix_pool_bytes(&stack.cycles, sizeof(stack.cycles));
+	mix_pool_bytes(&stack.entropy, sizeof(stack.entropy));
 }
 
 
-- 
2.35.1

Re: [PATCH v6 03/17] parisc: define get_cycles macro for arch-override

[Helge Deller]

On 4/23/22 23:26, Jason A. Donenfeld wrote:
> PA-RISC defines a get_cycles() function, but it forgot to do the usual
> `#define get_cycles get_cycles` dance, making it impossible for generic
> code to see if an arch-specific function was defined.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Helge Deller <deller@gmx.de>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Acked-by: Helge Deller <deller@gmx.de> # parisc

Thank you!
Helge

> ---
>  arch/parisc/include/asm/timex.h | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/parisc/include/asm/timex.h b/arch/parisc/include/asm/timex.h
> index 06b510f8172e..b4622cb06a75 100644
> --- a/arch/parisc/include/asm/timex.h
> +++ b/arch/parisc/include/asm/timex.h
> @@ -13,9 +13,10 @@
>
>  typedef unsigned long cycles_t;
>
> -static inline cycles_t get_cycles (void)
> +static inline cycles_t get_cycles(void)
>  {
>  	return mfctl(16);
>  }
> +#define get_cycles get_cycles
>
>  #endif

Re: [PATCH v6 02/17] s390: define get_cycles macro for arch-override

[Heiko Carstens]

On Sat, Apr 23, 2022 at 11:26:08PM +0200, Jason A. Donenfeld wrote:
> S390x defines a get_cycles() function, but it forgot to do the usual
> `#define get_cycles get_cycles` dance, making it impossible for generic
> code to see if an arch-specific function was defined.
> 
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Heiko Carstens <hca@linux.ibm.com>
> Cc: Vasily Gorbik <gor@linux.ibm.com>
> Cc: Alexander Gordeev <agordeev@linux.ibm.com>
> Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
> Cc: Sven Schnelle <svens@linux.ibm.com>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
>  arch/s390/include/asm/timex.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
> index 2cfce42aa7fc..ce878e85b6e4 100644
> --- a/arch/s390/include/asm/timex.h
> +++ b/arch/s390/include/asm/timex.h
> @@ -197,6 +197,7 @@ static inline cycles_t get_cycles(void)
>  {
>  	return (cycles_t) get_tod_clock() >> 2;
>  }
> +#define get_cycles get_cycles

As far as I can tell this doesn't change anything, since the
asm-generic timex.h header file is not included/used at all on s390
(and if it would, this would have resulted in a compile error).

FWIW, the compiled code also tells me that the s390 specific
get_cycles() version is already used.

Is any of your subsequent patches making sure that the asm generic
header file gets included everywhere? Otherwise I don't see the point
of this patch.

Re: [PATCH v6 02/17] s390: define get_cycles macro for arch-override

[Jason A. Donenfeld]

On 4/25/22, Heiko Carstens <hca@linux.ibm.com> wrote:
> Is any of your subsequent patches making sure that the asm generic
> header file gets included everywhere? Otherwise I don't see the point
> of this patch.
>

Yes; patch 6 requires this as a prereq. I'm not doing this arbitrarily.

Jason

Re: [PATCH v6 02/17] s390: define get_cycles macro for arch-override

[Heiko Carstens]

On Mon, Apr 25, 2022 at 11:48:34AM +0200, Jason A. Donenfeld wrote:
> On 4/25/22, Heiko Carstens <hca@linux.ibm.com> wrote:
> > Is any of your subsequent patches making sure that the asm generic
> > header file gets included everywhere? Otherwise I don't see the point
> > of this patch.
> 
> Yes; patch 6 requires this as a prereq. I'm not doing this arbitrarily.

Ok, that was not obvious to me, especially since I was only cc'ed for
this patch and assumed this was actually a bug fix.
Thanks for clarifying.

Acked-by: Heiko Carstens <hca@linux.ibm.com>

Re: [PATCH v6 13/17] x86: use fallback for random_get_entropy() instead of zero

[Thomas Gleixner]

On Sat, Apr 23 2022 at 23:26, Jason A. Donenfeld wrote:

Please follow the guidelines of the tip maintainers when touching x86
code. https://www.kernel.org/doc/html/latest/process/maintainer-tip.html#patch-subject

> In the event that random_get_entropy() can't access a cycle counter or
> similar, falling back to returning 0 is really not the best we can do.
> Instead, at least calling random_get_entropy_fallback() would be
> preferable, because that always needs to return _something_, even
> falling back to jiffies eventually. It's not as though
> random_get_entropy_fallback() is super high precision or guaranteed to
> be entropic, but basically anything that's not zero all the time is
> better than returning zero all the time.
>
> If CONFIG_X86_TSC=n, then it's possible that we're running on a 486
> with no RDTSC, so we only need the fallback code for that case.

There are also 586 CPUs which lack TSC.

> While we're at it, fix up both the new function and the get_cycles()
> function from which its derived to use cpu_feature_enabled() rather
> than boot_cpu_has().

Lot's of 'we' here. We are not doing anything.

https://www.kernel.org/doc/html/latest/process/maintainer-tip.html#changelog

> +static inline unsigned long random_get_entropy(void)
> +{
> +#ifndef CONFIG_X86_TSC
> +	if (!cpu_feature_enabled(X86_FEATURE_TSC))
> +		return random_get_entropy_fallback();
> +#endif

Please get rid of this ifdeffery. While you are right, that anything
with CONFIG_X86_TSC=y should have a TSC, there is virt ....

cpu_feature_enabled() is runtime patched and only evaluated before
alternative patching, so the win of this ifdef is marginally, if even
noticable.

We surely can think about making TSC mandatory, but not selectively in a
particalur context.

Thanks,

        tglx

Re: [PATCH v6 06/17] timekeeping: add raw clock fallback for random_get_entropy()

[Thomas Gleixner]

On Sat, Apr 23 2022 at 23:26, Jason A. Donenfeld wrote:
> The addition of random_get_entropy_fallback() provides access to
> whichever time source has the highest frequency, which is useful for
> gathering entropy on platforms without available cycle counters. It's
> not necessarily as good as being able to quickly access a cycle counter
> that the CPU has, but it's still something, even when it falls back to
> being jiffies-based.
>
> In the event that a given arch does not define get_cycles(), falling
> back to the get_cycles() default implementation that returns 0 is really
> not the best we can do. Instead, at least calling
> random_get_entropy_fallback() would be preferable, because that always
> needs to return _something_, even falling back to jiffies eventually.
> It's not as though random_get_entropy_fallback() is super high precision
> or guaranteed to be entropic, but basically anything that's not zero all
> the time is better than returning zero all the time.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Theodore Ts'o <tytso@mit.edu>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Not that I care much, but in general taking over authorship w/o
attribution via Suggested-by or such is frowned upon.

Thanks,

        tglx

Re: [PATCH v6 06/17] timekeeping: add raw clock fallback for random_get_entropy()

[Jason A. Donenfeld]

Hi Thomas,

On Mon, Apr 25, 2022 at 02:37:11PM +0200, Thomas Gleixner wrote:
> On Sat, Apr 23 2022 at 23:26, Jason A. Donenfeld wrote:
> > The addition of random_get_entropy_fallback() provides access to
> > whichever time source has the highest frequency, which is useful for
> > gathering entropy on platforms without available cycle counters. It's
> > not necessarily as good as being able to quickly access a cycle counter
> > that the CPU has, but it's still something, even when it falls back to
> > being jiffies-based.
> >
> > In the event that a given arch does not define get_cycles(), falling
> > back to the get_cycles() default implementation that returns 0 is really
> > not the best we can do. Instead, at least calling
> > random_get_entropy_fallback() would be preferable, because that always
> > needs to return _something_, even falling back to jiffies eventually.
> > It's not as though random_get_entropy_fallback() is super high precision
> > or guaranteed to be entropic, but basically anything that's not zero all
> > the time is better than returning zero all the time.
> >
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Theodore Ts'o <tytso@mit.edu>
> > Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> 
> Not that I care much, but in general taking over authorship w/o
> attribution via Suggested-by or such is frowned upon.

Sorry about that. Usually I'm pretty good about adding those. I guess
something must have gotten lost this time through, as the v1 of this
started out using sched_clock() (Arnd's suggestion) and then moved to
using the raw ktime clock after your suggestion, and I missed the
Suggested-by. I'll add that. Meanwhile, do you want to Ack this patch?
Do the technical aspects look okay to you?

Jason

Re: [PATCH v6 13/17] x86: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

Hi Thomas,

On Mon, Apr 25, 2022 at 02:35:39PM +0200, Thomas Gleixner wrote:
> On Sat, Apr 23 2022 at 23:26, Jason A. Donenfeld wrote:
> 
> Please follow the guidelines of the tip maintainers when touching x86
> code. https://www.kernel.org/doc/html/latest/process/maintainer-tip.html#patch-subject
> https://www.kernel.org/doc/html/latest/process/maintainer-tip.html#changelog

Will fix up the message and topic.

> > In the event that random_get_entropy() can't access a cycle counter or
> > similar, falling back to returning 0 is really not the best we can do.
> > Instead, at least calling random_get_entropy_fallback() would be
> > preferable, because that always needs to return _something_, even
> > falling back to jiffies eventually. It's not as though
> > random_get_entropy_fallback() is super high precision or guaranteed to
> > be entropic, but basically anything that's not zero all the time is
> > better than returning zero all the time.
> >
> > If CONFIG_X86_TSC=n, then it's possible that we're running on a 486
> > with no RDTSC, so we only need the fallback code for that case.
> 
> There are also 586 CPUs which lack TSC.

Will note this in the rewritten commit message.

> > +static inline unsigned long random_get_entropy(void)
> > +{
> > +#ifndef CONFIG_X86_TSC
> > +	if (!cpu_feature_enabled(X86_FEATURE_TSC))
> > +		return random_get_entropy_fallback();
> > +#endif
> 
> Please get rid of this ifdeffery. While you are right, that anything
> with CONFIG_X86_TSC=y should have a TSC, there is virt ....
> 
> cpu_feature_enabled() is runtime patched and only evaluated before
> alternative patching, so the win of this ifdef is marginally, if even
> noticable.
> 
> We surely can think about making TSC mandatory, but not selectively in a
> particalur context.

This would be a regression of sorts from the current code, which reads:

    static inline cycles_t get_cycles(void)
    {
    #ifndef CONFIG_X86_TSC
            if (!boot_cpu_has(X86_FEATURE_TSC))
                    return 0;
    #endif
            return rdtsc();
    }

So my ifdef is just copying that one. I can make it into a `if
(IS_ENABLED(CONFIG_X86_TSC))` thing, if you'd prefer that. But on
systems where CONFIG_X86_TSC=n, including the extra code there seems
kind of undesirable. Consider the current interrupt handler random.c
code on x86, whose first lines (usually) compile to:

.text:0000000000001A70 add_interrupt_randomness proc near
.text:0000000000001A70                 movsxd  rcx, edi
.text:0000000000001A73                 rdtsc
.text:0000000000001A75                 shl     rdx, 20h
.text:0000000000001A79                 mov     rdi, [rsp+0]
.text:0000000000001A7D                 or      rax, rdx
.text:0000000000001A80                 mov     rdx, offset irq_randomness
.text:0000000000001A87                 mov     rsi, gs:__irq_regs
.text:0000000000001A8F                 add     rdx, gs:this_cpu_off

I'm not sure what advantage we'd get by changing that from the ifdefs to
unconditionally including that if statement. Your argument about virt
can't be valid, since the current get_cycles() code uses the ifdefs. And
if you're arguing from the basis that CONFIG_X86_TSC=y is not reliable,
then why does CONFIG_X86_TSC even exist in the first place?

Rather the stronger argument you could make would be that moving from
boot_cpu_has() to cpu_feature_enabled() (Borislav's suggestion) means
that there's now a static branch here, so the actual cost to the
assembly is a few meaningless nops, which you don't think would play a
part in quantizing when rdtsc is called. If this is actually what you
have in mind, and you find that ifdef ugly enough that this would be
worth it, I can understand, and I'll make that change for v7. But I
don't understand you to currently be making that argument, so I'm not
quite sure what your position is.

Could you clarify what you mean here and what your expectations are? And
how does that point of view tie into the fact that get_cycles()
currently uses the ifdef?

Thanks,
Jason

Re: [PATCH v6 13/17] x86: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

On Mon, Apr 25, 2022 at 03:41:00PM +0200, Jason A. Donenfeld wrote:
> .text:0000000000001A70 add_interrupt_randomness proc near
> .text:0000000000001A70                 movsxd  rcx, edi
> .text:0000000000001A73                 rdtsc
> .text:0000000000001A75                 shl     rdx, 20h
> .text:0000000000001A79                 mov     rdi, [rsp+0]
> .text:0000000000001A7D                 or      rax, rdx
> .text:0000000000001A80                 mov     rdx, offset irq_randomness
> .text:0000000000001A87                 mov     rsi, gs:__irq_regs
> .text:0000000000001A8F                 add     rdx, gs:this_cpu_off

For context, here's what your suggested change looks like:

.text:0000000000001AF0 add_interrupt_randomness proc near
.text:0000000000001AF0                 push    rbx
.text:0000000000001AF1                 movsxd  rbx, edi
.text:0000000000001AF4                 jmp     loc_25AA
.text:0000000000001AF9 loc_1AF9:                               ; CODE XREF: add_interrupt_randomness+AC1↓j
.text:0000000000001AF9                 rdtsc
.text:0000000000001AFB                 shl     rdx, 20h
.text:0000000000001AFF                 or      rax, rdx
.text:0000000000001B02
.text:0000000000001B02 loc_1B02:                               ; CODE XREF: add_interrupt_randomness+12C↓j
.text:0000000000001B02                 mov     rdx, offset irq_randomness
.text:0000000000001B09                 mov     rcx, gs:__irq_regs
.text:0000000000001B11                 add     rdx, gs:this_cpu_off
[...]
.altinstr_aux:00000000000025AA loc_25AA:                               ; CODE XREF: add_interrupt_randomness+4↑j
.altinstr_aux:00000000000025AA                 test    byte ptr cs:boot_cpu_data+20h, 10h
.altinstr_aux:00000000000025B1                 jnz     loc_1AF9
.altinstr_aux:00000000000025B7                 jmp     loc_1C17

So an extra push, and then that jmp gets nop'd out (I hope). Plus the
altinstr area. I guess that's not awful, but I fail to see what we
actually gain here over the existing code, which doesn't bother messing
with this at runtime when the kernel builder opts out. The ifdef has
always been there; what's the reason for adding it now in 2022?
Virtualization cannot be it.

Jason

Re: [PATCH v6 10/17] arm: use fallback for random_get_entropy() instead of zero

[Russell King (Oracle)]

On Sat, Apr 23, 2022 at 11:26:16PM +0200, Jason A. Donenfeld wrote:
> In the event that random_get_entropy() can't access a cycle counter or
> similar, falling back to returning 0 is really not the best we can do.
> Instead, at least calling random_get_entropy_fallback() would be
> preferable, because that always needs to return _something_, even
> falling back to jiffies eventually. It's not as though
> random_get_entropy_fallback() is super high precision or guaranteed to
> be entropic, but basically anything that's not zero all the time is
> better than returning zero all the time.
> 
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Russell King <linux@armlinux.org.uk>

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v6 08/17] riscv: use fallback for random_get_entropy() instead of zero

[Palmer Dabbelt]

On Sat, 23 Apr 2022 14:26:14 PDT (-0700), Jason@zx2c4.com wrote:
> In the event that random_get_entropy() can't access a cycle counter or
> similar, falling back to returning 0 is really not the best we can do.
> Instead, at least calling random_get_entropy_fallback() would be
> preferable, because that always needs to return _something_, even
> falling back to jiffies eventually. It's not as though
> random_get_entropy_fallback() is super high precision or guaranteed to
> be entropic, but basically anything that's not zero all the time is
> better than returning zero all the time.

Makes sense: we had an architecturally-mandated timer at the time, but 
we don't any more.  Every real implementation has a timer right now, but 
that may change in the future so it doesn't hurt to fix it before it's 
broken.

> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
>  arch/riscv/include/asm/timex.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> index 507cae273bc6..d6a7428f6248 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -41,7 +41,7 @@ static inline u32 get_cycles_hi(void)
>  static inline unsigned long random_get_entropy(void)
>  {
>  	if (unlikely(clint_time_val == NULL))
> -		return 0;
> +		return random_get_entropy_fallback();
>  	return get_cycles();
>  }
>  #define random_get_entropy()	random_get_entropy()

Fine for me if this goes in via some other tree, but also happy to take 
it via the RISC-V tree if you'd like.  IMO we could just call this a 
fix, maybe

Fixes: aa9887608e77 ("RISC-V: Check clint_time_val before use")

(but that just brought this back, so there's likely older kernels broken 
too).  Shouldn't be breaking any real hardware, though, so no rush on my 
end.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>

Thanks!

Re: [PATCH v6 08/17] riscv: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

Hi Palmer,

On Mon, Apr 25, 2022 at 4:55 PM Palmer Dabbelt <palmer@dabbelt.com> wrote:
> Fine for me if this goes in via some other tree, but also happy to take
> it via the RISC-V tree if you'd like.

I'm going to take this series through the random.git tree, as I've got
things that build on top of it for random.c slated for 5.19.

> IMO we could just call this a
> fix, maybe
>
> Fixes: aa9887608e77 ("RISC-V: Check clint_time_val before use")
>
> (but that just brought this back, so there's likely older kernels broken
> too).  Shouldn't be breaking any real hardware, though, so no rush on my
> end.

That'd be fine with me, but it'd involve also backporting the
timekeeping patch, which adds a new API, so maybe we better err on the
side of caution with that new code.

> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>

Thanks for the review.

> Makes sense: we had an architecturally-mandated timer at the time, but
> we don't any more.

That's too bad. Out of curiosity, what happened? Was that deemed too
expensive for certain types of chips that western digital wanted to
produce for their hard drives, or some really constrained use case
like that?

Jason

Re: [PATCH v6 08/17] riscv: use fallback for random_get_entropy() instead of zero

[Palmer Dabbelt]

On Mon, 25 Apr 2022 08:02:49 PDT (-0700), Jason@zx2c4.com wrote:
> Hi Palmer,
>
> On Mon, Apr 25, 2022 at 4:55 PM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>> Fine for me if this goes in via some other tree, but also happy to take
>> it via the RISC-V tree if you'd like.
>
> I'm going to take this series through the random.git tree, as I've got
> things that build on top of it for random.c slated for 5.19.
>
>> IMO we could just call this a
>> fix, maybe
>>
>> Fixes: aa9887608e77 ("RISC-V: Check clint_time_val before use")
>>
>> (but that just brought this back, so there's likely older kernels broken
>> too).  Shouldn't be breaking any real hardware, though, so no rush on my
>> end.
>
> That'd be fine with me, but it'd involve also backporting the
> timekeeping patch, which adds a new API, so maybe we better err on the
> side of caution with that new code.

wFM.  Like I said this isn't going to break any existing hardware, and 
anyone trying to ship something without the timers is likely going to be 
in for way more trouble than this so will probably be stuck with newer 
kernels anyway.

>> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
>> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
>
> Thanks for the review.
>
>> Makes sense: we had an architecturally-mandated timer at the time, but
>> we don't any more.
>
> That's too bad. Out of curiosity, what happened? Was that deemed too
> expensive for certain types of chips that western digital wanted to
> produce for their hard drives, or some really constrained use case
> like that?

No idea, but it was at the beginning of the "everything is 
optional"-ification of the ISA so I'm guessing it's just part of that.

Re: [PATCH v6 13/17] x86: use fallback for random_get_entropy() instead of zero

[Thomas Gleixner]

On Mon, Apr 25 2022 at 15:41, Jason A. Donenfeld wrote:
> On Mon, Apr 25, 2022 at 02:35:39PM +0200, Thomas Gleixner wrote:
>> > +static inline unsigned long random_get_entropy(void)
>> > +{
>> > +#ifndef CONFIG_X86_TSC
>> > +	if (!cpu_feature_enabled(X86_FEATURE_TSC))
>> > +		return random_get_entropy_fallback();
>> > +#endif
>> 
>> Please get rid of this ifdeffery. While you are right, that anything
>> with CONFIG_X86_TSC=y should have a TSC, there is virt ....
>> 
>> cpu_feature_enabled() is runtime patched and only evaluated before
>> alternative patching, so the win of this ifdef is marginally, if even
>> noticable.
>> 
>> We surely can think about making TSC mandatory, but not selectively in a
>> particalur context.
>
> This would be a regression of sorts from the current code, which reads:
>
>     static inline cycles_t get_cycles(void)
>     {
>     #ifndef CONFIG_X86_TSC
>             if (!boot_cpu_has(X86_FEATURE_TSC))
>                     return 0;
>     #endif
>             return rdtsc();
>     }

Bah. Indeed. Misread the patch, but yes, if you are at it to make that
cpu_feature_enabled() then change the config thing to IS_ENABLED() too.

Thanks,

        tglx

Re: [PATCH v6 13/17] x86: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

Hey Thomas,

On Mon, Apr 25, 2022 at 07:03:54PM +0200, Thomas Gleixner wrote:
> Bah. Indeed. Misread the patch, but yes, if you are at it to make that
> cpu_feature_enabled() then change the config thing to IS_ENABLED() too.

Alright, will do for v7. I also just confirmed the !IS_ENABLED() way
produces the same code as the #ifndef.

Jason

[PATCH v7 13/17] x86/asm: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is suboptimal. Instead, fallback
to calling random_get_entropy_fallback(), which isn't extremely high
precision or guaranteed to be entropic, but is certainly better than
returning zero all the time.

If CONFIG_X86_TSC=n, then it's possible for the kernel to run on systems
without RDTSC, such as 486 and certain 586, so the fallback code is only
required for that case.

As well, fix up both the new function and the get_cycles() function from
which it was derived to use cpu_feature_enabled() rather than
boot_cpu_has(), and use !IS_ENABLED() instead of #ifndef.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
Changes v6->v7:
- Adjust commit subject and body to match tip commit style.
- Use !IS_ENABLED() instead of #ifndef.

 arch/x86/include/asm/timex.h | 9 +++++++++
 arch/x86/include/asm/tsc.h   | 7 +++----
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index a4a8b1b16c0c..956e4145311b 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -5,6 +5,15 @@
 #include <asm/processor.h>
 #include <asm/tsc.h>
 
+static inline unsigned long random_get_entropy(void)
+{
+	if (!IS_ENABLED(CONFIG_X86_TSC) &&
+	    !cpu_feature_enabled(X86_FEATURE_TSC))
+		return random_get_entropy_fallback();
+	return rdtsc();
+}
+#define random_get_entropy random_get_entropy
+
 /* Assume we use the PIT time source for the clock tick */
 #define CLOCK_TICK_RATE		PIT_TICK_RATE
 
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 01a300a9700b..fbdc3d951494 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -20,13 +20,12 @@ extern void disable_TSC(void);
 
 static inline cycles_t get_cycles(void)
 {
-#ifndef CONFIG_X86_TSC
-	if (!boot_cpu_has(X86_FEATURE_TSC))
+	if (!IS_ENABLED(CONFIG_X86_TSC) &&
+	    !cpu_feature_enabled(X86_FEATURE_TSC))
 		return 0;
-#endif
-
 	return rdtsc();
 }
+#define get_cycles get_cycles
 
 extern struct system_counterval_t convert_art_to_tsc(u64 art);
 extern struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns);
-- 
2.35.1

Re: [PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Maciej W. Rozycki]

On Sat, 23 Apr 2022, Jason A. Donenfeld wrote:

> diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
> index b05bb70a2e46..8cfa485d19e6 100644
> --- a/arch/mips/include/asm/timex.h
> +++ b/arch/mips/include/asm/timex.h
[...]
> +	if (cpu_has_3kex)
> +		c0_random = (read_c0_random() >> 8) & 0x3f;

 Hmm, I wonder whether we do need to mask the contents of the register out 
here given that known implementations return zeros in reserved bits.  Even 
though R3000 documentation I have access to makes no guarantee as to the 
values of the reserved bits here I think we can safely proceed according 
to what systems we do actually support do (even though it only saves one 
instruction).

>  	else
> -		return 0;	/* no usable register */
> +		c0_random = read_c0_random() & 0x3f;

 Here the architecture guarantees unused bits to be zero, but the number 
of them varies between implementations.  However we'll only ever use this 
leg for the R4000/R4400 processors, which have 48 TLB entries, and for the 
Ingenic XBurst cores, which I have now verified in documentation (which 
user-reported dumps from /proc/cpuinfo are consistent with) that have 32 
TLB entries.  So I think this mask operation can go as well.

 I guess these updates can be made with a follow-up change though.

  Maciej

Re: [PATCH v6 04/17] alpha: define get_cycles macro for arch-override

[Matt Turner]

Acked-by: Matt Turner <mattst88@gmail.com>

Re: [PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Jason A. Donenfeld]

Hey Maciej,

On Tue, Apr 26, 2022 at 09:28:39PM +0100, Maciej W. Rozycki wrote:
> On Sat, 23 Apr 2022, Jason A. Donenfeld wrote:
> 
> > diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
> > index b05bb70a2e46..8cfa485d19e6 100644
> > --- a/arch/mips/include/asm/timex.h
> > +++ b/arch/mips/include/asm/timex.h
> [...]
> > +	if (cpu_has_3kex)
> > +		c0_random = (read_c0_random() >> 8) & 0x3f;
> 
>  Hmm, I wonder whether we do need to mask the contents of the register out 
> here given that known implementations return zeros in reserved bits.  Even 
> though R3000 documentation I have access to makes no guarantee as to the 
> values of the reserved bits here I think we can safely proceed according 
> to what systems we do actually support do (even though it only saves one 
> instruction).
> 
> >  	else
> > -		return 0;	/* no usable register */
> > +		c0_random = read_c0_random() & 0x3f;
> 
>  Here the architecture guarantees unused bits to be zero, but the number 
> of them varies between implementations.  However we'll only ever use this 
> leg for the R4000/R4400 processors, which have 48 TLB entries, and for the 
> Ingenic XBurst cores, which I have now verified in documentation (which 
> user-reported dumps from /proc/cpuinfo are consistent with) that have 32 
> TLB entries.  So I think this mask operation can go as well.
> 
>  I guess these updates can be made with a follow-up change though.

There is lots of optimization potential on a few fronts we've identified
in this thread. Let's save these for a follow-up. I'd rather this
initial one be at least somewhat simple, so that as it gets optimized,
it'll be easy to handle regressions. Also, it probably makes sense for
you to send the patches for these, since you have both the hardware
chops and the hardware itself to assess these ideas. I am interested in
the topic though, so please do CC me.

Jason

Re: [PATCH v6 11/17] openrisc: use fallback for random_get_entropy() instead of zero

[Stafford Horne]

On Sat, Apr 23, 2022 at 11:26:17PM +0200, Jason A. Donenfeld wrote:
> In the event that random_get_entropy() can't access a cycle counter or
> similar, falling back to returning 0 is really not the best we can do.
> Instead, at least calling random_get_entropy_fallback() would be
> preferable, because that always needs to return _something_, even
> falling back to jiffies eventually. It's not as though
> random_get_entropy_fallback() is super high precision or guaranteed to
> be entropic, but basically anything that's not zero all the time is
> better than returning zero all the time.
> 
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Jonas Bonn <jonas@southpole.se>
> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> Cc: Stafford Horne <shorne@gmail.com>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
>  arch/openrisc/include/asm/timex.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
> index d52b4e536e3f..115e89b336cd 100644
> --- a/arch/openrisc/include/asm/timex.h
> +++ b/arch/openrisc/include/asm/timex.h
> @@ -23,6 +23,9 @@ static inline cycles_t get_cycles(void)
>  {
>  	return mfspr(SPR_TTCR);
>  }
> +#define get_cycles get_cycles
> +
> +#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
>  
>  /* This isn't really used any more */
>  #define CLOCK_TICK_RATE 1000
> -- 
> 2.35.1

Hi Jason,

This looks OK, but I am wondering why we cannot add this to
"include/linux/timex.h" as the default implementation of random_get_entropy
if get_cycles is defined.  I see there are 2 cases:

   1. architectures that define get_cycles, and random_get_entropy is defined in
      include/linux/timex.h.
      (openrisc, sparc*, xtensa*, nios2, um*, arm)

   2. architectures that define random_get_entropy explicitly
      (mips, m68k, riscv, x86)

* Those marked with * just define get_cycles as 0.

I would think in "include/linux/timex.h" we could define.

    #ifndef random_get_entropy
    #ifdef get_cycles
    #define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
    #else
    #define random_get_entropy()   random_get_entropy_fallback()
    #endif
    #endif

For architectures that define get_cycles as 0, they can be cleaned up.

-Stafford

Re: [PATCH v6 11/17] openrisc: use fallback for random_get_entropy() instead of zero

[Jason A. Donenfeld]

Hi Stafford,

On Thu, Apr 28, 2022 at 06:42:30AM +0900, Stafford Horne wrote:
> On Sat, Apr 23, 2022 at 11:26:17PM +0200, Jason A. Donenfeld wrote:
> > In the event that random_get_entropy() can't access a cycle counter or
> > similar, falling back to returning 0 is really not the best we can do.
> > Instead, at least calling random_get_entropy_fallback() would be
> > preferable, because that always needs to return _something_, even
> > falling back to jiffies eventually. It's not as though
> > random_get_entropy_fallback() is super high precision or guaranteed to
> > be entropic, but basically anything that's not zero all the time is
> > better than returning zero all the time.
> > 
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Jonas Bonn <jonas@southpole.se>
> > Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> > Cc: Stafford Horne <shorne@gmail.com>
> > Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> > ---
> >  arch/openrisc/include/asm/timex.h | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
> > index d52b4e536e3f..115e89b336cd 100644
> > --- a/arch/openrisc/include/asm/timex.h
> > +++ b/arch/openrisc/include/asm/timex.h
> > @@ -23,6 +23,9 @@ static inline cycles_t get_cycles(void)
> >  {
> >  	return mfspr(SPR_TTCR);
> >  }
> > +#define get_cycles get_cycles
> > +
> > +#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
> >  
> >  /* This isn't really used any more */
> >  #define CLOCK_TICK_RATE 1000
> > -- 
> > 2.35.1
> 
> Hi Jason,
> 
> This looks OK, but I am wondering why we cannot add this to
> "include/linux/timex.h" as the default implementation of random_get_entropy
> if get_cycles is defined.  I see there are 2 cases:
> 
>    1. architectures that define get_cycles, and random_get_entropy is defined in
>       include/linux/timex.h.
>       (openrisc, sparc*, xtensa*, nios2, um*, arm)
> 
>    2. architectures that define random_get_entropy explicitly
>       (mips, m68k, riscv, x86)
> 
> * Those marked with * just define get_cycles as 0.
> 
> I would think in "include/linux/timex.h" we could define.
> 
>     #ifndef random_get_entropy
>     #ifdef get_cycles
>     #define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
>     #else
>     #define random_get_entropy()   random_get_entropy_fallback()
>     #endif
>     #endif
> 
> For architectures that define get_cycles as 0, they can be cleaned up.
> 
> -Stafford

What you've described is what patch 6 of this series already does.

However, it does it assuming that if get_cycles() exists, it returns a
real value, because most architectures do the right thing by default
when they choose to define that function, and thus there is no purpose
in adding the needless branch.

OpenRISC, however, is a notable outlier in that the code generated by
get_cycles() does not correspond to an actual cycle counter on all CPU
implementations. In particular, the QEMU simulator always returns 0. And
the QEMU simulator is in fact what people are using to test this stuff,
so the kernel code needs to actually work for this prevalent "virtual
silicon", which I assume is much more widely deployed than any real FPGA
running this or that OpenRISC softcore.

So this patch includes the branch as part of its definition, so that we
get the best of both worlds, which seems to me like a pretty acceptable
compromise.

Thanks,
Jason

Re: [PATCH v6 05/17] powerpc: define get_cycles macro for arch-override

[Michael Ellerman]

"Jason A. Donenfeld" <Jason@zx2c4.com> writes:
> PowerPC defines a get_cycles() function, but it forgot to do the usual
> `#define get_cycles get_cycles` dance, making it impossible for generic
> code to see if an arch-specific function was defined.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
>  arch/powerpc/include/asm/timex.h | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Michael Ellerman <mpe@ellerman.id.au>

cheers

> diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
> index fa2e76e4093a..14b4489de52c 100644
> --- a/arch/powerpc/include/asm/timex.h
> +++ b/arch/powerpc/include/asm/timex.h
> @@ -19,6 +19,7 @@ static inline cycles_t get_cycles(void)
>  {
>  	return mftb();
>  }
> +#define get_cycles get_cycles
>  
>  #endif	/* __KERNEL__ */
>  #endif	/* _ASM_POWERPC_TIMEX_H */
> -- 
> 2.35.1

[PATCH v7 11/17] openrisc: account for 0 starting value in random_get_entropy()

[Jason A. Donenfeld]

As a sanity check, this series makes sure that during early boot, the
cycle counter isn't returning all zeros. However, OpenRISC's TTCR timer
can be rather slow and starts out as zero during stages of early boot.
We know it works, however. So just always add 1 to random_get_entropy()
so that it doesn't trigger these checks.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
Changes v6->v7:
- Add 1 to cycle counter to account for functional but slow-to-begin
  counter on QEMU.

 arch/openrisc/include/asm/timex.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
index d52b4e536e3f..a78a5807c927 100644
--- a/arch/openrisc/include/asm/timex.h
+++ b/arch/openrisc/include/asm/timex.h
@@ -23,6 +23,9 @@ static inline cycles_t get_cycles(void)
 {
 	return mfspr(SPR_TTCR);
 }
+#define get_cycles get_cycles
+
+#define random_get_entropy() ((unsigned long)get_cycles() + 1)
 
 /* This isn't really used any more */
 #define CLOCK_TICK_RATE 1000
-- 
2.35.1

Re: [PATCH v7 11/17] openrisc: account for 0 starting value in random_get_entropy()

[Stafford Horne]

Hi Jason,

On Fri, Apr 29, 2022 at 02:16:48AM +0200, Jason A. Donenfeld wrote:
> As a sanity check, this series makes sure that during early boot, the
> cycle counter isn't returning all zeros. However, OpenRISC's TTCR timer
> can be rather slow and starts out as zero during stages of early boot.
> We know it works, however. So just always add 1 to random_get_entropy()
> so that it doesn't trigger these checks.

Just one nit, you might want to qualify that this is related to simulators/qemu:
 * "However, in simulators OpenRISC's TTCR timer can be rather slow..."

> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Jonas Bonn <jonas@southpole.se>
> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> Acked-by: Stafford Horne <shorne@gmail.com>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
> Changes v6->v7:
> - Add 1 to cycle counter to account for functional but slow-to-begin
>   counter on QEMU.
> 
>  arch/openrisc/include/asm/timex.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
> index d52b4e536e3f..a78a5807c927 100644
> --- a/arch/openrisc/include/asm/timex.h
> +++ b/arch/openrisc/include/asm/timex.h
> @@ -23,6 +23,9 @@ static inline cycles_t get_cycles(void)
>  {
>  	return mfspr(SPR_TTCR);
>  }
> +#define get_cycles get_cycles
> +
> +#define random_get_entropy() ((unsigned long)get_cycles() + 1)
>  
>  /* This isn't really used any more */
>  #define CLOCK_TICK_RATE 1000

Thanks,

-Stafford

Re: [PATCH v7 11/17] openrisc: account for 0 starting value in random_get_entropy()

[Jason A. Donenfeld]

Hi Stafford,

On Sat, Apr 30, 2022 at 10:19:03AM +0900, Stafford Horne wrote:
> Hi Jason,
> 
> On Fri, Apr 29, 2022 at 02:16:48AM +0200, Jason A. Donenfeld wrote:
> > As a sanity check, this series makes sure that during early boot, the
> > cycle counter isn't returning all zeros. However, OpenRISC's TTCR timer
> > can be rather slow and starts out as zero during stages of early boot.
> > We know it works, however. So just always add 1 to random_get_entropy()
> > so that it doesn't trigger these checks.
> 
> Just one nit, you might want to qualify that this is related to simulators/qemu:
>  * "However, in simulators OpenRISC's TTCR timer can be rather slow..."

Nice catch, will do.

Jason

> 
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Jonas Bonn <jonas@southpole.se>
> > Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> > Acked-by: Stafford Horne <shorne@gmail.com>
> > Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> > ---
> > Changes v6->v7:
> > - Add 1 to cycle counter to account for functional but slow-to-begin
> >   counter on QEMU.
> > 
> >  arch/openrisc/include/asm/timex.h | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
> > index d52b4e536e3f..a78a5807c927 100644
> > --- a/arch/openrisc/include/asm/timex.h
> > +++ b/arch/openrisc/include/asm/timex.h
> > @@ -23,6 +23,9 @@ static inline cycles_t get_cycles(void)
> >  {
> >  	return mfspr(SPR_TTCR);
> >  }
> > +#define get_cycles get_cycles
> > +
> > +#define random_get_entropy() ((unsigned long)get_cycles() + 1)
> >  
> >  /* This isn't really used any more */
> >  #define CLOCK_TICK_RATE 1000
> 
> Thanks,
> 
> -Stafford

Re: [PATCH v7 11/17] openrisc: account for 0 starting value in random_get_entropy()

[Stafford Horne]

On Sat, Apr 30, 2022 at 03:29:37AM +0200, Jason A. Donenfeld wrote:
> Hi Stafford,
> 
> On Sat, Apr 30, 2022 at 10:19:03AM +0900, Stafford Horne wrote:
> > Hi Jason,
> > 
> > On Fri, Apr 29, 2022 at 02:16:48AM +0200, Jason A. Donenfeld wrote:
> > > As a sanity check, this series makes sure that during early boot, the
> > > cycle counter isn't returning all zeros. However, OpenRISC's TTCR timer
> > > can be rather slow and starts out as zero during stages of early boot.
> > > We know it works, however. So just always add 1 to random_get_entropy()
> > > so that it doesn't trigger these checks.
> > 
> > Just one nit, you might want to qualify that this is related to simulators/qemu:
> >  * "However, in simulators OpenRISC's TTCR timer can be rather slow..."
> 
> Nice catch, will do.

I was thinking about this, the reason the tick timer is returing 0 is because
the timer is not started.  It's getting initialized right after the random
number generator.

A patch like this helps to startup the timer during intial startup, but I am not
sure its the best thing:

diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 15f1b38dfe03..a9b3b5614e13 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -521,6 +521,9 @@ _start:
        l.ori   r3,r0,0x1
        l.mtspr r0,r3,SPR_SR
 
+       l.movhi r3,hi(SPR_TTMR_CR)
+       l.mtspr r0,r3,SPR_TTMR
+
        CLEAR_GPR(r1)
        CLEAR_GPR(r2)
        CLEAR_GPR(r3)

I was testing this by removing the get_cycles() + 1 patch and I get the
following warning. Starting the tick timer early on in kernel boot helps fix
this issue as well.

But I wonder:
 - Why don't any other architectures have similar issues.
 - Is there any more correct place to do an early timer kick off.

    exec: /home/shorne/work/openrisc/qemu/build/or1k-softmmu/qemu-system-or1k -cpu or1200 -M or1k-sim -kernel /home/shorne/work/linux/vmlinux -initrd /home/shorne/work/linux/initramfs.cpio.gz -serial mon:stdi
    o -nographic -gdb tcp::10001 -m 64

    [    0.000000] OpenRISC Linux -- http://openrisc.io
    [    0.000000] percpu: Embedded 5 pages/cpu s11584 r8192 d21184 u40960
    [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8160
    [    0.000000] Kernel command line:
    [    0.000000] Dentry cache hash table entries: 8192 (order: 2, 32768 bytes, linear)
    [    0.000000] Inode-cache hash table entries: 4096 (order: 1, 16384 bytes, linear)
    [    0.000000] Sorting __ex_table...
    [    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
    [    0.000000] mem_init_done ...........................................
    [    0.000000] Memory: 57424K/65536K available (4595K kernel code, 157K rwdata, 976K rodata, 195K init, 89K bss, 8112K reserved, 0K cma-reserved)
    [    0.000000] rcu: Hierarchical RCU implementation.
    [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
    [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
    [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
    [    0.000000] NR_IRQS: 32, nr_irqs: 32, preallocated irqs: 0

(Warning for get_cycles returning 0)

    [    0.000000] ------------[ cut here ]------------
    [    0.000000] WARNING: CPU: 0 PID: 0 at drivers/char/random.c:1016 rand_initialize+0x15c/0x18c
    [    0.000000] Missing cycle counter and fallback timer; RNG entropy collection will consequently suffer.
    [    0.000000] Modules linked in:
    [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.18.0-rc4-17398-gc576c8ccdc30-dirty #724
    [    0.000000] Call trace:
    [    0.000000] [<(ptrval)>] dump_stack_lvl+0x78/0xa0
    [    0.000000] [<(ptrval)>] dump_stack+0x1c/0x2c
    [    0.000000] [<(ptrval)>] __warn+0x100/0x13c
    [    0.000000] [<(ptrval)>] ? rand_initialize+0x15c/0x18c
    [    0.000000] [<(ptrval)>] warn_slowpath_fmt+0x84/0x9c
    [    0.000000] [<(ptrval)>] rand_initialize+0x15c/0x18c
    [    0.000000] [<(ptrval)>] ? start_kernel+0x5dc/0x7c4
    [    0.000000] [<(ptrval)>] ? start_kernel+0x0/0x7c4
    [    0.000000] ---[ end trace 0000000000000000 ]---

(Start of OpenRISC tick timer)

    [    0.000000] clocksource: openrisc_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
    [    0.000000] 40.00 BogoMIPS (lpj=200000)
    [    0.000000] pid_max: default: 32768 minimum: 301
    [    0.000000] random: get_random_bytes called from net_ns_init+0x94/0x3f8 with crng_init=0
    [    0.000000] Mount-cache hash table entries: 2048 (order: 0, 8192 bytes, linear)
    [    0.000000] Mountpoint-cache hash table entries: 2048 (order: 0, 8192 bytes, linear)
    [    0.010000] rcu: Hierarchical SRCU implementation.

Re: [PATCH v7 11/17] openrisc: account for 0 starting value in random_get_entropy()

[Jason A. Donenfeld]

Hi Stafford,

On Sun, May 01, 2022 at 07:11:37AM +0900, Stafford Horne wrote:
 
> I was thinking about this, the reason the tick timer is returing 0 is because
> the timer is not started.  It's getting initialized right after the random
> number generator.
> 
> A patch like this helps to startup the timer during intial startup, but I am not
> sure its the best thing:
> 
> diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
> index 15f1b38dfe03..a9b3b5614e13 100644
> --- a/arch/openrisc/kernel/head.S
> +++ b/arch/openrisc/kernel/head.S
> @@ -521,6 +521,9 @@ _start:
>         l.ori   r3,r0,0x1
>         l.mtspr r0,r3,SPR_SR
>  
> +       l.movhi r3,hi(SPR_TTMR_CR)
> +       l.mtspr r0,r3,SPR_TTMR
> +
>         CLEAR_GPR(r1)
>         CLEAR_GPR(r2)
>         CLEAR_GPR(r3)

Yea, great, I was thinking about doing it in assembly earlier in boot
too, but didn't know how you'd feel about that. I like this better.

The reason I think this is a good approach is that it means the cycle
counter includes some information about how long startup takes from the
earliest stages -- which could involve probing various devices or
strange things. So enabling the timer in head.S seems good to me.

> But I wonder:
>  - Why don't any other architectures have similar issues.
>  - Is there any more correct place to do an early timer kick off.

I think most other archs (like, say, x86) have their cycle counter
enabled by default at boot time. I was surprised to see that the or1k
risc cycle counter comes disabled by default actually.

I'll send a v9 incorporating your suggested assembly change.

Jason

Re: [PATCH v7 11/17] openrisc: account for 0 starting value in random_get_entropy()

[Stafford Horne]

On Sun, May 01, 2022 at 12:34:02AM +0200, Jason A. Donenfeld wrote:
> Hi Stafford,
> 
> On Sun, May 01, 2022 at 07:11:37AM +0900, Stafford Horne wrote:
>  
> > I was thinking about this, the reason the tick timer is returing 0 is because
> > the timer is not started.  It's getting initialized right after the random
> > number generator.
> > 
> > A patch like this helps to startup the timer during intial startup, but I am not
> > sure its the best thing:
> > 
> > diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
> > index 15f1b38dfe03..a9b3b5614e13 100644
> > --- a/arch/openrisc/kernel/head.S
> > +++ b/arch/openrisc/kernel/head.S
> > @@ -521,6 +521,9 @@ _start:
> >         l.ori   r3,r0,0x1
> >         l.mtspr r0,r3,SPR_SR
> >  
> > +       l.movhi r3,hi(SPR_TTMR_CR)
> > +       l.mtspr r0,r3,SPR_TTMR
> > +
> >         CLEAR_GPR(r1)
> >         CLEAR_GPR(r2)
> >         CLEAR_GPR(r3)
> 
> Yea, great, I was thinking about doing it in assembly earlier in boot
> too, but didn't know how you'd feel about that. I like this better.
> 
> The reason I think this is a good approach is that it means the cycle
> counter includes some information about how long startup takes from the
> earliest stages -- which could involve probing various devices or
> strange things. So enabling the timer in head.S seems good to me.
> 
> > But I wonder:
> >  - Why don't any other architectures have similar issues.
> >  - Is there any more correct place to do an early timer kick off.
> 
> I think most other archs (like, say, x86) have their cycle counter
> enabled by default at boot time. I was surprised to see that the or1k
> risc cycle counter comes disabled by default actually.
> 
> I'll send a v9 incorporating your suggested assembly change.

Thanks!

-Stafford

Re: [PATCH v6 06/17] timekeeping: add raw clock fallback for random_get_entropy()

[Thomas Gleixner]

On Mon, Apr 25 2022 at 15:22, Jason A. Donenfeld wrote:
> On Mon, Apr 25, 2022 at 02:37:11PM +0200, Thomas Gleixner wrote:
>> On Sat, Apr 23 2022 at 23:26, Jason A. Donenfeld wrote:
>> >
>> > Cc: Thomas Gleixner <tglx@linutronix.de>
>> > Cc: Arnd Bergmann <arnd@arndb.de>
>> > Cc: Theodore Ts'o <tytso@mit.edu>
>> > Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
>> 
>> Not that I care much, but in general taking over authorship w/o
>> attribution via Suggested-by or such is frowned upon.
>
> Sorry about that. Usually I'm pretty good about adding those. I guess
> something must have gotten lost this time through, as the v1 of this
> started out using sched_clock() (Arnd's suggestion) and then moved to
> using the raw ktime clock after your suggestion, and I missed the
> Suggested-by. I'll add that. Meanwhile, do you want to Ack this patch?
> Do the technical aspects look okay to you?

Yes. Please fix the subject line:

     timekeeping: Add raw clock fallback for random_get_entropy()

and stick the Cc's below the SOB, so it conforms with the TIP tree
rules. Other than that:

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v7 13/17] x86/asm: use fallback for random_get_entropy() instead of zero

[Thomas Gleixner]

On Tue, Apr 26 2022 at 10:33, Jason A. Donenfeld wrote:

Subject: x86/tsc: Use .....

This has absolutely nothing to do with ASM and the sentence after the
colon starts with an uppercase letter.

> In the event that random_get_entropy() can't access a cycle counter or
> similar, falling back to returning 0 is suboptimal. Instead, fallback
> to calling random_get_entropy_fallback(), which isn't extremely high
> precision or guaranteed to be entropic, but is certainly better than
> returning zero all the time.
>
> If CONFIG_X86_TSC=n, then it's possible for the kernel to run on systems
> without RDTSC, such as 486 and certain 586, so the fallback code is only
> required for that case.
>
> As well, fix up both the new function and the get_cycles() function from
> which it was derived to use cpu_feature_enabled() rather than
> boot_cpu_has(), and use !IS_ENABLED() instead of #ifndef.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: x86@kernel.org

Same comments vs. Cc's

> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
> Changes v6->v7:
> - Adjust commit subject and body to match tip commit style.

Mostly ... :)

With that fixed:

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH v7] timekeeping: Add raw clock fallback for random_get_entropy()

[Jason A. Donenfeld]

The addition of random_get_entropy_fallback() provides access to
whichever time source has the highest frequency, which is useful for
gathering entropy on platforms without available cycle counters. It's
not necessarily as good as being able to quickly access a cycle counter
that the CPU has, but it's still something, even when it falls back to
being jiffies-based.

In the event that a given arch does not define get_cycles(), falling
back to the get_cycles() default implementation that returns 0 is really
not the best we can do. Instead, at least calling
random_get_entropy_fallback() would be preferable, because that always
needs to return _something_, even falling back to jiffies eventually.
It's not as though random_get_entropy_fallback() is super high precision
or guaranteed to be entropic, but basically anything that's not zero all
the time is better than returning zero all the time.

Finally, since random_get_entropy_fallback() is used during extremely
early boot when randomizing freelists in mm_init(), it can be called
before timekeeping has been initialized. In that case there really is
nothing we can do; jiffies hasn't even started ticking yet. So just give
up and return 0.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
---
Changes v6->v7:
- Return 0 if we're called before timekeeping has been initialized,
  reported by Nathan.

 include/linux/timex.h     |  8 ++++++++
 kernel/time/timekeeping.c | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/include/linux/timex.h b/include/linux/timex.h
index 5745c90c8800..3871b06bd302 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -62,6 +62,8 @@
 #include <linux/types.h>
 #include <linux/param.h>
 
+unsigned long random_get_entropy_fallback(void);
+
 #include <asm/timex.h>
 
 #ifndef random_get_entropy
@@ -74,8 +76,14 @@
  *
  * By default we use get_cycles() for this purpose, but individual
  * architectures may override this in their asm/timex.h header file.
+ * If a given arch does not have get_cycles(), then we fallback to
+ * using random_get_entropy_fallback().
  */
+#ifdef get_cycles
 #define random_get_entropy()	((unsigned long)get_cycles())
+#else
+#define random_get_entropy()	random_get_entropy_fallback()
+#endif
 #endif
 
 /*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index dcdcb85121e4..7cd2ec239cae 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -17,6 +17,7 @@
 #include <linux/clocksource.h>
 #include <linux/jiffies.h>
 #include <linux/time.h>
+#include <linux/timex.h>
 #include <linux/tick.h>
 #include <linux/stop_machine.h>
 #include <linux/pvclock_gtod.h>
@@ -2380,6 +2381,15 @@ static int timekeeping_validate_timex(const struct __kernel_timex *txc)
 	return 0;
 }
 
+/**
+ * random_get_entropy_fallback - Returns the raw clock source value,
+ * used by random.c for platforms with no valid random_get_entropy().
+ */
+unsigned long random_get_entropy_fallback(void)
+{
+	return tk_clock_read(&tk_core.timekeeper.tkr_mono);
+}
+EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
 
 /**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function
-- 
2.35.1

[PATCH v7] timekeeping: Add raw clock fallback for random_get_entropy()

[Jason A. Donenfeld]

The addition of random_get_entropy_fallback() provides access to
whichever time source has the highest frequency, which is useful for
gathering entropy on platforms without available cycle counters. It's
not necessarily as good as being able to quickly access a cycle counter
that the CPU has, but it's still something, even when it falls back to
being jiffies-based.

In the event that a given arch does not define get_cycles(), falling
back to the get_cycles() default implementation that returns 0 is really
not the best we can do. Instead, at least calling
random_get_entropy_fallback() would be preferable, because that always
needs to return _something_, even falling back to jiffies eventually.
It's not as though random_get_entropy_fallback() is super high precision
or guaranteed to be entropic, but basically anything that's not zero all
the time is better than returning zero all the time.

Finally, since random_get_entropy_fallback() is used during extremely
early boot when randomizing freelists in mm_init(), it can be called
before timekeeping has been initialized. In that case there really is
nothing we can do; jiffies hasn't even started ticking yet. So just give
up and return 0.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
---
Changes v6->v7:
- Return 0 if we're called before timekeeping has been initialized,
  reported by Nathan.

 include/linux/timex.h     |  8 ++++++++
 kernel/time/timekeeping.c | 12 ++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/include/linux/timex.h b/include/linux/timex.h
index 5745c90c8800..3871b06bd302 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -62,6 +62,8 @@
 #include <linux/types.h>
 #include <linux/param.h>
 
+unsigned long random_get_entropy_fallback(void);
+
 #include <asm/timex.h>
 
 #ifndef random_get_entropy
@@ -74,8 +76,14 @@
  *
  * By default we use get_cycles() for this purpose, but individual
  * architectures may override this in their asm/timex.h header file.
+ * If a given arch does not have get_cycles(), then we fallback to
+ * using random_get_entropy_fallback().
  */
+#ifdef get_cycles
 #define random_get_entropy()	((unsigned long)get_cycles())
+#else
+#define random_get_entropy()	random_get_entropy_fallback()
+#endif
 #endif
 
 /*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index dcdcb85121e4..1d1302ca8d36 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -17,6 +17,7 @@
 #include <linux/clocksource.h>
 #include <linux/jiffies.h>
 #include <linux/time.h>
+#include <linux/timex.h>
 #include <linux/tick.h>
 #include <linux/stop_machine.h>
 #include <linux/pvclock_gtod.h>
@@ -2380,6 +2381,17 @@ static int timekeeping_validate_timex(const struct __kernel_timex *txc)
 	return 0;
 }
 
+/**
+ * random_get_entropy_fallback - Returns the raw clock source value,
+ * used by random.c for platforms with no valid random_get_entropy().
+ */
+unsigned long random_get_entropy_fallback(void)
+{
+	if (unlikely(!tk_core.timekeeper.tkr_mono.clock))
+		return 0;
+	return tk_clock_read(&tk_core.timekeeper.tkr_mono);
+}
+EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
 
 /**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function
-- 
2.35.1

[timekeeping] 3aeaac747d: PANIC:early_exception

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 5721 bytes --]



Greeting,

FYI, we noticed the following commit (built with clang-15):

commit: 3aeaac747d194aa3cff28351b4a83267faa11b3a ("[PATCH v7] timekeeping: Add raw clock fallback for random_get_entropy()")
url: https://github.com/intel-lab-lkp/linux/commits/Jason-A-Donenfeld/timekeeping-Add-raw-clock-fallback-for-random_get_entropy/20220505-082221
base: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git 107c948d1d3e61d10aee9d0f7c3d81bbee9842af
patch link: https://lore.kernel.org/lkml/20220505001924.176087-1-Jason@zx2c4.com

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------+------------+------------+
|                                 | 107c948d1d | 3aeaac747d |
+---------------------------------+------------+------------+
| boot_successes                  | 14         | 0          |
| boot_failures                   | 0          | 12         |
| PANIC:early_exception           | 0          | 12         |
| RIP:random_get_entropy_fallback | 0          | 12         |
| BUG:kernel_hang_in_boot_stage   | 0          | 12         |
+---------------------------------+------------+------------+


If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>


[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: bootconsole [earlyser0] enabled
[    0.000000][    T0] NX (Execute Disable) protection: active
PANIC: early exception 0x0d IP 10:ffffffff812cef11 error 0 cr2 0xffff888004a3aff8
[    0.000000][    T0] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc5-00017-g3aeaac747d19 #4
[ 0.000000][ T0] RIP: 0010:random_get_entropy_fallback (kbuild/src/rand-3/kernel/time/timekeeping.c:194 kbuild/src/rand-3/kernel/time/timekeeping.c:2390) 
[ 0.000000][ T0] Code: 41 5d 41 5e 41 5f 5d c3 90 f3 0f 1e fa 55 48 89 e5 53 48 8b 1d 00 4e df 03 48 89 d8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 df e8 d1 2f 3b 00 4c 8b 1b 48 89 df e8 f6
All code
========
   0:	41 5d                	pop    %r13
   2:	41 5e                	pop    %r14
   4:	41 5f                	pop    %r15
   6:	5d                   	pop    %rbp
   7:	c3                   	retq   
   8:	90                   	nop
   9:	f3 0f 1e fa          	endbr64 
   d:	55                   	push   %rbp
   e:	48 89 e5             	mov    %rsp,%rbp
  11:	53                   	push   %rbx
  12:	48 8b 1d 00 4e df 03 	mov    0x3df4e00(%rip),%rbx        # 0x3df4e19
  19:	48 89 d8             	mov    %rbx,%rax
  1c:	48 c1 e8 03          	shr    $0x3,%rax
  20:	48 b9 00 00 00 00 00 	movabs $0xdffffc0000000000,%rcx
  27:	fc ff df 
  2a:*	80 3c 08 00          	cmpb   $0x0,(%rax,%rcx,1)		<-- trapping instruction
  2e:	74 08                	je     0x38
  30:	48 89 df             	mov    %rbx,%rdi
  33:	e8 d1 2f 3b 00       	callq  0x3b3009
  38:	4c 8b 1b             	mov    (%rbx),%r11
  3b:	48 89 df             	mov    %rbx,%rdi
  3e:	e8                   	.byte 0xe8
  3f:	f6                   	.byte 0xf6

Code starting with the faulting instruction
===========================================
   0:	80 3c 08 00          	cmpb   $0x0,(%rax,%rcx,1)
   4:	74 08                	je     0xe
   6:	48 89 df             	mov    %rbx,%rdi
   9:	e8 d1 2f 3b 00       	callq  0x3b2fdf
   e:	4c 8b 1b             	mov    (%rbx),%r11
  11:	48 89 df             	mov    %rbx,%rdi
  14:	e8                   	.byte 0xe8
  15:	f6                   	.byte 0xf6
[    0.000000][    T0] RSP: 0000:ffffffff84a07d70 EFLAGS: 00010046 ORIG_RAX: 0000000000000000
[    0.000000][    T0] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[    0.000000][    T0] RDX: ffffffffff240a7a RSI: 00000000000001da RDI: ffffffffff2408a0
[    0.000000][    T0] RBP: ffffffff84a07d78 R08: 0000000000dbf764 R09: 000000000000000b
[    0.000000][    T0] R10: ffffffff86a00070 R11: ffffffff8583df04 R12: dffffc0000000000
[    0.000000][    T0] R13: ffffffff84a07e50 R14: ffffffffff2408a0 R15: 00000000000001da
[    0.000000][    T0] FS:  0000000000000000(0000) GS:ffffffff84a9e000(0000) knlGS:0000000000000000
[    0.000000][    T0] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.000000][    T0] CR2: ffff888004a3aff8 CR3: 0000000005876000 CR4: 00000000000406a0
[    0.000000][    T0] Call Trace:
[    0.000000][    T0]  <TASK>
[ 0.000000][ T0] add_device_randomness (kbuild/src/rand-3/drivers/char/random.c:1028) 
[ 0.000000][ T0] ? dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:470) 
[ 0.000000][ T0] dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:151) 
[ 0.000000][ T0] dmi_present (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:605) 


To reproduce:

        # build kernel
	cd linux
	cp config-5.18.0-rc5-00017-g3aeaac747d19 .config
	make HOSTCC=clang-15 CC=clang-15 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
	make HOSTCC=clang-15 CC=clang-15 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
	cd <mod-install-dir>
	find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email

        # if come across any failure that blocks the test,
        # please remove ~/.lkp and /lkp dir to run from a clean state.



-- 
0-DAY CI Kernel Test Service
https://01.org/lkp



[-- Attachment #2: config-5.18.0-rc5-00017-g3aeaac747d19 --]
[-- Type: text/plain, Size: 130859 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.18.0-rc5 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 15.0.0 (git://gitmirror/llvm_project 5e004fb787698440a387750db7f8028e7cb14cfc)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=150000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=150000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=150000
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
CONFIG_BPF_PRELOAD=y
CONFIG_BPF_PRELOAD_UMD=y
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_DEBUG_RSEQ=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_HAVE_INTEL_TXT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_X2APIC is not set
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# end of Performance monitoring

CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
# CONFIG_X86_UMIP is not set
CONFIG_CC_HAS_IBT=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_TINY_POWER_BUTTON=m
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=38
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
# CONFIG_ACPI_APEI_EINJ is not set
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_ACPI_PFRUT=y
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
# end of Binary Emulations

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_WERROR is not set
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
CONFIG_KVM_XEN=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_UNUSED_KSYMS_WHITELIST=""
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_ZPOOL=m
CONFIG_ZBUD=m
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=m
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_HMM_MIRROR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set

#
# Data Access Monitoring
#
CONFIG_DAMON=y
# CONFIG_DAMON_VADDR is not set
CONFIG_DAMON_PADDR=y
# CONFIG_DAMON_SYSFS is not set
CONFIG_DAMON_RECLAIM=y
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
CONFIG_TLS=m
# CONFIG_TLS_DEVICE is not set
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=m
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_IPV6_IOAM6_LWTUNNEL=y
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=y
# CONFIG_NETFILTER_XT_SET is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=y
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_TIME=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
# CONFIG_IP_SET_BITMAP_IPMAC is not set
# CONFIG_IP_SET_BITMAP_PORT is not set
# CONFIG_IP_SET_HASH_IP is not set
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=m
# CONFIG_IP_SET_HASH_MAC is not set
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
# CONFIG_IP_SET_LIST_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
# CONFIG_IP_VS_LBLCR is not set
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
CONFIG_IP_VS_TWOS=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
# end of DECnet: Netfilter Configuration

CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
# CONFIG_BRIDGE_EBT_MARK is not set
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
# CONFIG_BRIDGE_EBT_DNAT is not set
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
# CONFIG_TIPC_DIAG is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
# CONFIG_L2TP_IP is not set
# CONFIG_L2TP_ETH is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_BRIDGE_MRP=y
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_ATALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
# CONFIG_IEEE802154_SOCKET is not set
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_TAPRIO=m
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=m
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_CAKE=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
CONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_ACT_GATE=y
# CONFIG_NET_IFE_SKBMARK is not set
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=m
# CONFIG_OPENVSWITCH_GRE is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=m
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=m
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_QRTR=y
# CONFIG_QRTR_SMD is not set
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=y
# CONFIG_NET_NCSI is not set
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=m
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=y
# end of AX.25 network device drivers

CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
# CONFIG_CAN_SLCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIDTL1=m
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
CONFIG_BT_MTKUART=m
CONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
# CONFIG_CAIF_USB is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not set
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
# CONFIG_NFC_MEI_PHY is not set
# CONFIG_NFC_SIM is not set
CONFIG_NFC_VIRTUAL_NCI=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
# CONFIG_NFC_ST21NFCA_I2C is not set
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
# CONFIG_NFC_NXP_NCI_I2C is not set
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
# CONFIG_NFC_S3FWRN82_UART is not set
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices

# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=y

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCI_MESON=m
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
# CONFIG_CXL_PCI is not set
# CONFIG_CXL_ACPI is not set
CONFIG_CXL_PORT=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=m
# end of Bus devices

CONFIG_CONNECTOR=m

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_SMI=m
# CONFIG_GOOGLE_COREBOOT_TABLE is not set
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
# CONFIG_GNSS_MTK_SERIAL is not set
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_MCHP48L640=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_MXIC=m
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_ARASAN=y

#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=m

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
# CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE is not set
CONFIG_MTD_SPI_NOR_SWP_KEEP=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=m
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=y
CONFIG_HABANA_AI=y
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# end of SCSI device support

# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NTB_NETDEV is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_MHI_NET is not set
# CONFIG_ARCNET is not set
# CONFIG_CAIF_DRIVERS is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_DLINK_DIR685=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_IQS62X=y
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=m
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=m
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_JOYSTICK_QWIIC=y
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM80X_ONKEY is not set
CONFIG_INPUT_AD714X=y
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_BMA150=y
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX77693_HAPTIC=m
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=m
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_PCAP=y
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_IQS269A=y
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=m
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=m
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# end of PCMCIA character devices

# CONFIG_MWAVE is not set
# CONFIG_DEVMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_DEVPORT is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
# CONFIG_XILLYBUS_PCIE is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_NVIDIA_GPU=m
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MMIO=m
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_SC18IS602 is not set
CONFIG_SPI_SIFIVE=m
# CONFIG_SPI_MXIC is not set
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=m
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=m
CONFIG_SPMI_HISI3670=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_DA9062 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_SX150X is not set

#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
CONFIG_PINCTRL_CHERRYVIEW=y
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_MERRIFIELD=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not set
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=m
# CONFIG_PINCTRL_CEDARFORK is not set
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_ELKHARTLAKE=y
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=m
CONFIG_PINCTRL_JASPERLAKE=m
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_PINCTRL_TIGERLAKE=y
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_VX855=m
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
# CONFIG_GPIO_104_IDIO_16 is not set
CONFIG_GPIO_104_IDI_48=m
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=m
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9052=m
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP3943=y
# CONFIG_GPIO_LP873X is not set
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TPS68470 is not set
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_MERRIFIELD is not set
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
# CONFIG_GPIO_PISOSR is not set
CONFIG_GPIO_XRA1403=y
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers

CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=m
CONFIG_IP5XXX_POWER=m
CONFIG_MAX8925_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=m
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9052=m
CONFIG_BATTERY_DA9150=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=m
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_CROS_USBPD=m
# CONFIG_CHARGER_CROS_PCHG is not set
CONFIG_CHARGER_BD99954=m
CONFIG_CHARGER_WILCO=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AS370=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=m
# CONFIG_I8K is not set
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=y
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC2992=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX31730=m
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=y
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_STTS751=y
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA238=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_XGENE=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_SENSORS_ASUS_EC=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=y
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
CONFIG_INTEL_MENLOW=m
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC_DEV=m
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_INTEL_SOC_PMIC_MRFLD=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_ACPI=m
CONFIG_MFD_INTEL_LPSS_PCI=m
# CONFIG_MFD_INTEL_PMC_BXT is not set
CONFIG_MFD_IQS62X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=m
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=m
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
CONFIG_EZX_PCAP=y
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_WCD934X is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_DA9052=m
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LP8788 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX14577 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=m
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6315=m
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_SPMI=m
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RT5190A=y
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6245 is not set
CONFIG_REGULATOR_RTQ2134=m
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=m
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_QCOM_LABIBB=m
# CONFIG_RC_CORE is not set
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_CROS_EC=m
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=m
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_LCD_AMS369FG06=m
# CONFIG_LCD_LMS501KF03 is not set
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_ADP5520=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
CONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_COUGAR=m
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_XIAOMI=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=m
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=m
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEAM=m
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_UDRAW_PS3=m
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
CONFIG_HID_ALPS=m
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=m
# end of I2C HID support

CONFIG_I2C_HID_CORE=m

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=m
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_APU=m
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP8788=y
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA9052=m
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_MLXCPLD=m
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=y
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM36274=m
CONFIG_LEDS_TPS6105X=m

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AS3645A=y
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_MTD=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_LEDS_TRIGGER_PATTERN=y
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_LEDS_SIEMENS_SIMATIC_IPC=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
# CONFIG_INFINIBAND_ADDR_TRANS is not set
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
CONFIG_INFINIBAND_HFI1=y
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
CONFIG_SDMA_VERBOSITY=y
CONFIG_INFINIBAND_RDMAVT=y
# CONFIG_RDMA_RXE is not set
CONFIG_RDMA_SIW=y
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_OPA_VNIC=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=m
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
# CONFIG_EDAC_X38 is not set
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_LP8788 is not set
CONFIG_RTC_DRV_MAX6900=m
# CONFIG_RTC_DRV_MAX8907 is not set
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
# CONFIG_RTC_DRV_MAX6916 is not set
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=m
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RV3029_HWMON is not set
CONFIG_RTC_DRV_RX6110=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=m
# CONFIG_RTC_DRV_DS1685 is not set
CONFIG_RTC_DRV_DS1689=y
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_CROS_EC is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_RTC_DRV_WILCO_EC is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
CONFIG_DMABUF_SYSFS_STATS=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
# CONFIG_LCD2S is not set
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=m
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=m
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_VDPA=m
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VDPA=m
CONFIG_VDPA_USER=m
# CONFIG_IFCVF is not set
# CONFIG_VP_VDPA is not set
CONFIG_ALIBABA_ENI_VDPA=m
CONFIG_VHOST_IOTLB=m
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
# CONFIG_COMEDI_TEST is not set
# CONFIG_COMEDI_PARPORT is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=y
# CONFIG_COMEDI_8255_PCI is not set
CONFIG_COMEDI_ADDI_WATCHDOG=m
# CONFIG_COMEDI_ADDI_APCI_1032 is not set
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=y
# CONFIG_COMEDI_ADDI_APCI_2032 is not set
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=y
# CONFIG_COMEDI_ADL_PCI7X3X is not set
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
# CONFIG_COMEDI_ADV_PCI1720 is not set
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=y
CONFIG_COMEDI_ADV_PCI1760=m
CONFIG_COMEDI_ADV_PCI_DIO=y
# CONFIG_COMEDI_AMPLC_DIO200_PCI is not set
CONFIG_COMEDI_AMPLC_PC236_PCI=y
# CONFIG_COMEDI_AMPLC_PC263_PCI is not set
# CONFIG_COMEDI_AMPLC_PCI224 is not set
CONFIG_COMEDI_AMPLC_PCI230=m
# CONFIG_COMEDI_CONTEC_PCI_DIO is not set
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
# CONFIG_COMEDI_DYNA_PCI10XX is not set
CONFIG_COMEDI_GSC_HPDI=m
# CONFIG_COMEDI_MF6X4 is not set
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
# CONFIG_COMEDI_KE_COUNTER is not set
CONFIG_COMEDI_CB_PCIDAS64=m
# CONFIG_COMEDI_CB_PCIDAS is not set
CONFIG_COMEDI_CB_PCIDDA=y
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
# CONFIG_COMEDI_NI_6527 is not set
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
# CONFIG_COMEDI_NI_PCIDIO is not set
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
# CONFIG_COMEDI_PCMCIA_DRIVERS is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
# CONFIG_RTLLIB is not set
# CONFIG_FB_SM750 is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_UNISYSSPAR=y
# CONFIG_UNISYS_VISORNIC is not set
CONFIG_UNISYS_VISORINPUT=y
# CONFIG_FB_TFT is not set
CONFIG_PI433=y
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACPI_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
CONFIG_ADV_SWBUTTON=m
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_ASUS_WIRELESS=y
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_DCDBAS=y
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DELL_RBTN=m
CONFIG_DELL_SMBIOS=y
# CONFIG_DELL_SMBIOS_SMM is not set
CONFIG_DELL_SMO8800=m
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_GPD_POCKET_FAN=y
# CONFIG_HP_ACCEL is not set
CONFIG_WIRELESS_HOTKEY=y
CONFIG_IBM_RTL=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_ATOMISP2_PDX86=y
# CONFIG_INTEL_ATOMISP2_LED is not set
CONFIG_INTEL_ATOMISP2_PM=y
CONFIG_INTEL_SAR_INT1092=y
CONFIG_INTEL_SKL_INT3472=y
CONFIG_INTEL_PMC_CORE=y

#
# Intel Speed Select Technology interface support
#
CONFIG_INTEL_SPEED_SELECT_INTERFACE=y
# end of Intel Speed Select Technology interface support

#
# Intel Uncore Frequency Control
#
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
# end of Intel Uncore Frequency Control

CONFIG_INTEL_HID_EVENT=y
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_ISHTP_ECLITE=m
# CONFIG_INTEL_MRFLD_PWRBTN is not set
CONFIG_INTEL_PUNIT_IPC=y
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_VSEC is not set
CONFIG_MSI_LAPTOP=m
CONFIG_PCENGINES_APU2=y
CONFIG_BARCO_P50_GPIO=m
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=m
# CONFIG_ACPI_CMPC is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_SYSTEM76_ACPI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_SERIAL_MULTI_INSTANTIATE=m
CONFIG_MLX_PLATFORM=y
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_SIEMENS_SIMATIC_IPC=m
CONFIG_PMC_ATOM=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=m
# CONFIG_CHROMEOS_PSTORE is not set
# CONFIG_CHROMEOS_TBMC is not set
CONFIG_CROS_EC=m
# CONFIG_CROS_EC_I2C is not set
CONFIG_CROS_EC_ISHTP=m
# CONFIG_CROS_EC_SPI is not set
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CROS_EC_CHARDEV=m
# CONFIG_CROS_EC_LIGHTBAR is not set
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
# CONFIG_CROS_EC_SYSFS is not set
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_WILCO_EC=m
# CONFIG_WILCO_EC_DEBUGFS is not set
CONFIG_WILCO_EC_EVENTS=m
CONFIG_WILCO_EC_TELEMETRY=m
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_LMK04832=m
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_CLK_TWL6040 is not set
CONFIG_COMMON_CLK_PWM=y
CONFIG_XILINX_VCU=m
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_DMAR_PERF=y
CONFIG_DMAR_DEBUG=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEBUGFS=y
# CONFIG_INTEL_IOMMU_SVM is not set
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
# CONFIG_IRQ_REMAP is not set
CONFIG_VIRTIO_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=m

#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_INTEL_INT3496=m
CONFIG_EXTCON_INTEL_MRFLD=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_CROS_EC=m
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_NTB=y
CONFIG_NTB_MSI=y
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
CONFIG_NTB_INTEL=y
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_MSI_TEST is not set
CONFIG_NTB_TRANSPORT=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m
CONFIG_VME_FAKE=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
# CONFIG_VME_USER is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_DWC=m
# CONFIG_PWM_IQS620A is not set
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=y

#
# IRQ chip support
#
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=m
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_PXA_28NM_HSIC=m
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_USB4 is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=m
CONFIG_NVMEM_RMEM=m

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
# CONFIG_INTEL_TH_PCI is not set
# CONFIG_INTEL_TH_ACPI is not set
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_MSU=m
# CONFIG_INTEL_TH_PTI is not set
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=m
CONFIG_ALTERA_PR_IP_CORE=m
# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set
CONFIG_FPGA_MGR_ALTERA_CVP=m
CONFIG_FPGA_MGR_XILINX_SPI=m
# CONFIG_FPGA_MGR_MACHXO2_SPI is not set
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
# CONFIG_FPGA_DFL is not set
CONFIG_TEE=m

#
# TEE drivers
#
# end of TEE drivers

CONFIG_PM_OPP=y
CONFIG_UNISYS_VISORBUS=y
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=m
CONFIG_104_QUAD_8=m
CONFIG_INTERRUPT_CNT=m
# CONFIG_INTEL_QEP is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_DEBUG is not set
# end of Caches

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_CRAMFS_MTD is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=m
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4hc"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_RAM is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
CONFIG_CODA_FS=y
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
# CONFIG_AFS_DEBUG_CURSOR is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_ENCRYPTED_KEYS=m
CONFIG_USER_DECRYPTED_DATA=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=m
CONFIG_CRYPTO_CURVE25519_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=y
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
# CONFIG_CRYPTO_BLAKE2B is not set
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_BLAKE2S_X86=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA1_SSSE3=m
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM3=m
CONFIG_CRYPTO_LIB_SM4=m
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
CONFIG_CRC4=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_REF_TRACKER=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_BTF_TAG=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_FRAME_POINTER=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
CONFIG_NET_NS_REFCNT_TRACKER=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_PAGE_REF=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
# CONFIG_KASAN_STACK is not set
CONFIG_KASAN_VMALLOC=y
# CONFIG_KASAN_MODULE_TEST is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
CONFIG_CSD_LOCK_WAIT_DEBUG=y
CONFIG_PROVE_CXL_LOCKING=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
CONFIG_SAMPLE_TRACE_EVENTS=m
CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS=m
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_SAMPLE_TRACE_ARRAY=m
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_KPROBES=m
# CONFIG_SAMPLE_KRETPROBES is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_RPMSG_CLIENT is not set
CONFIG_SAMPLE_CONFIGFS=m
CONFIG_SAMPLE_CONNECTOR=m
# CONFIG_SAMPLE_FANOTIFY_ERROR is not set
# CONFIG_SAMPLE_HIDRAW is not set
# CONFIG_SAMPLE_LANDLOCK is not set
# CONFIG_SAMPLE_PIDFD is not set
CONFIG_SAMPLE_SECCOMP=y
CONFIG_SAMPLE_TIMER=y
CONFIG_SAMPLE_UHID=y
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_ANDROID_BINDERFS is not set
CONFIG_SAMPLE_VFS=y
# CONFIG_SAMPLE_INTEL_MEI is not set
CONFIG_SAMPLE_WATCHDOG=y
CONFIG_SAMPLE_WATCH_QUEUE=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
# CONFIG_UNWINDER_ORC is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
# CONFIG_KCOV_INSTRUMENT_ALL is not set
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 5163 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export category='functional'
	export timeout='10m'
	export job_origin='boot.yaml'
	export queue_cmdline_keys='branch
commit
kbuild_queue_analysis'
	export queue='validate'
	export testbox='vm-snb-120'
	export tbox_group='vm-snb'
	export branch='linux-review/Jason-A-Donenfeld/timekeeping-Add-raw-clock-fallback-for-random_get_entropy/20220505-082221'
	export commit='3aeaac747d194aa3cff28351b4a83267faa11b3a'
	export kconfig='x86_64-randconfig-a012-20220502'
	export repeat_to=6
	export stop_repeat_if_found=
	export nr_vm=160
	export submit_id='62734ccbcfa1ac070aed7d0d'
	export job_file='/lkp/jobs/scheduled/vm-snb-120/boot-1-debian-10.4-x86_64-20200603.cgz-3aeaac747d194aa3cff28351b4a83267faa11b3a-20220505-1802-1930d57-4.yaml'
	export id='c13a0564bc4b105a19a045b1b3d3c7dcb9d31cfd'
	export queuer_version='/zday/lkp'
	export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
	export nr_cpu=2
	export memory='16G'
	export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
	export ssh_base_port=23032
	export kernel_cmdline='vmalloc=128M initramfs_async=0 page_owner=on'
	export rootfs='debian-10.4-x86_64-20200603.cgz'
	export compiler='clang-15'
	export enqueue_time='2022-05-05 12:04:27 +0800'
	export _id='62734ccbcfa1ac070aed7d0f'
	export _rt='/result/boot/1/vm-snb/debian-10.4-x86_64-20200603.cgz/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a'
	export user='lkp'
	export LKP_SERVER='internal-lkp-server'
	export result_root='/result/boot/1/vm-snb/debian-10.4-x86_64-20200603.cgz/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/3'
	export scheduler_version='/lkp/lkp/.src-20220505-113744'
	export arch='x86_64'
	export max_uptime=600
	export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
	export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-snb/debian-10.4-x86_64-20200603.cgz/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/3
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/vmlinuz-5.18.0-rc5-00017-g3aeaac747d19
branch=linux-review/Jason-A-Donenfeld/timekeeping-Add-raw-clock-fallback-for-random_get_entropy/20220505-082221
job=/lkp/jobs/scheduled/vm-snb-120/boot-1-debian-10.4-x86_64-20200603.cgz-3aeaac747d194aa3cff28351b4a83267faa11b3a-20220505-1802-1930d57-4.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-randconfig-a012-20220502
commit=3aeaac747d194aa3cff28351b4a83267faa11b3a
vmalloc=128M initramfs_async=0 page_owner=on
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/modules.cgz'
	export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20220105.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export schedule_notify_address=
	export kbuild_queue_analysis=1
	export kernel='/pkg/linux/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/vmlinuz-5.18.0-rc5-00017-g3aeaac747d19'
	export dequeue_time='2022-05-05 12:04:47 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-snb-120/boot-1-debian-10.4-x86_64-20200603.cgz-3aeaac747d194aa3cff28351b4a83267faa11b3a-20220505-1802-1930d57-4.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper sleep
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 2432 bytes --]

[timekeeping] 3aeaac747d: PANIC:early_exception

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 5843 bytes --]



Greeting,

FYI, we noticed the following commit (built with clang-15):

commit: 3aeaac747d194aa3cff28351b4a83267faa11b3a ("[PATCH v7] timekeeping: Add raw clock fallback for random_get_entropy()")
url: https://github.com/intel-lab-lkp/linux/commits/Jason-A-Donenfeld/timekeeping-Add-raw-clock-fallback-for-random_get_entropy/20220505-082221
base: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git 107c948d1d3e61d10aee9d0f7c3d81bbee9842af
patch link: https://lore.kernel.org/lkml/20220505001924.176087-1-Jason(a)zx2c4.com

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------+------------+------------+
|                                 | 107c948d1d | 3aeaac747d |
+---------------------------------+------------+------------+
| boot_successes                  | 14         | 0          |
| boot_failures                   | 0          | 12         |
| PANIC:early_exception           | 0          | 12         |
| RIP:random_get_entropy_fallback | 0          | 12         |
| BUG:kernel_hang_in_boot_stage   | 0          | 12         |
+---------------------------------+------------+------------+


If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>


[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: bootconsole [earlyser0] enabled
[    0.000000][    T0] NX (Execute Disable) protection: active
PANIC: early exception 0x0d IP 10:ffffffff812cef11 error 0 cr2 0xffff888004a3aff8
[    0.000000][    T0] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc5-00017-g3aeaac747d19 #4
[ 0.000000][ T0] RIP: 0010:random_get_entropy_fallback (kbuild/src/rand-3/kernel/time/timekeeping.c:194 kbuild/src/rand-3/kernel/time/timekeeping.c:2390) 
[ 0.000000][ T0] Code: 41 5d 41 5e 41 5f 5d c3 90 f3 0f 1e fa 55 48 89 e5 53 48 8b 1d 00 4e df 03 48 89 d8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 df e8 d1 2f 3b 00 4c 8b 1b 48 89 df e8 f6
All code
========
   0:	41 5d                	pop    %r13
   2:	41 5e                	pop    %r14
   4:	41 5f                	pop    %r15
   6:	5d                   	pop    %rbp
   7:	c3                   	retq   
   8:	90                   	nop
   9:	f3 0f 1e fa          	endbr64 
   d:	55                   	push   %rbp
   e:	48 89 e5             	mov    %rsp,%rbp
  11:	53                   	push   %rbx
  12:	48 8b 1d 00 4e df 03 	mov    0x3df4e00(%rip),%rbx        # 0x3df4e19
  19:	48 89 d8             	mov    %rbx,%rax
  1c:	48 c1 e8 03          	shr    $0x3,%rax
  20:	48 b9 00 00 00 00 00 	movabs $0xdffffc0000000000,%rcx
  27:	fc ff df 
  2a:*	80 3c 08 00          	cmpb   $0x0,(%rax,%rcx,1)		<-- trapping instruction
  2e:	74 08                	je     0x38
  30:	48 89 df             	mov    %rbx,%rdi
  33:	e8 d1 2f 3b 00       	callq  0x3b3009
  38:	4c 8b 1b             	mov    (%rbx),%r11
  3b:	48 89 df             	mov    %rbx,%rdi
  3e:	e8                   	.byte 0xe8
  3f:	f6                   	.byte 0xf6

Code starting with the faulting instruction
===========================================
   0:	80 3c 08 00          	cmpb   $0x0,(%rax,%rcx,1)
   4:	74 08                	je     0xe
   6:	48 89 df             	mov    %rbx,%rdi
   9:	e8 d1 2f 3b 00       	callq  0x3b2fdf
   e:	4c 8b 1b             	mov    (%rbx),%r11
  11:	48 89 df             	mov    %rbx,%rdi
  14:	e8                   	.byte 0xe8
  15:	f6                   	.byte 0xf6
[    0.000000][    T0] RSP: 0000:ffffffff84a07d70 EFLAGS: 00010046 ORIG_RAX: 0000000000000000
[    0.000000][    T0] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[    0.000000][    T0] RDX: ffffffffff240a7a RSI: 00000000000001da RDI: ffffffffff2408a0
[    0.000000][    T0] RBP: ffffffff84a07d78 R08: 0000000000dbf764 R09: 000000000000000b
[    0.000000][    T0] R10: ffffffff86a00070 R11: ffffffff8583df04 R12: dffffc0000000000
[    0.000000][    T0] R13: ffffffff84a07e50 R14: ffffffffff2408a0 R15: 00000000000001da
[    0.000000][    T0] FS:  0000000000000000(0000) GS:ffffffff84a9e000(0000) knlGS:0000000000000000
[    0.000000][    T0] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.000000][    T0] CR2: ffff888004a3aff8 CR3: 0000000005876000 CR4: 00000000000406a0
[    0.000000][    T0] Call Trace:
[    0.000000][    T0]  <TASK>
[ 0.000000][ T0] add_device_randomness (kbuild/src/rand-3/drivers/char/random.c:1028) 
[ 0.000000][ T0] ? dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:470) 
[ 0.000000][ T0] dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:151) 
[ 0.000000][ T0] dmi_present (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:605) 


To reproduce:

        # build kernel
	cd linux
	cp config-5.18.0-rc5-00017-g3aeaac747d19 .config
	make HOSTCC=clang-15 CC=clang-15 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
	make HOSTCC=clang-15 CC=clang-15 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
	cd <mod-install-dir>
	find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email

        # if come across any failure that blocks the test,
        # please remove ~/.lkp and /lkp dir to run from a clean state.



-- 
0-DAY CI Kernel Test Service
https://01.org/lkp



[-- Attachment #2: config-5.18.0-rc5-00017-g3aeaac747d19 --]
[-- Type: text/plain, Size: 130859 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.18.0-rc5 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 15.0.0 (git://gitmirror/llvm_project 5e004fb787698440a387750db7f8028e7cb14cfc)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=150000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=150000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=150000
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
CONFIG_BPF_PRELOAD=y
CONFIG_BPF_PRELOAD_UMD=y
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_DEBUG_RSEQ=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_HAVE_INTEL_TXT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_X2APIC is not set
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# end of Performance monitoring

CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
# CONFIG_X86_UMIP is not set
CONFIG_CC_HAS_IBT=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_TINY_POWER_BUTTON=m
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=38
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
# CONFIG_ACPI_APEI_EINJ is not set
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_ACPI_PFRUT=y
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
# end of Binary Emulations

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_WERROR is not set
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
CONFIG_KVM_XEN=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_UNUSED_KSYMS_WHITELIST=""
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_ZPOOL=m
CONFIG_ZBUD=m
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=m
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_HMM_MIRROR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set

#
# Data Access Monitoring
#
CONFIG_DAMON=y
# CONFIG_DAMON_VADDR is not set
CONFIG_DAMON_PADDR=y
# CONFIG_DAMON_SYSFS is not set
CONFIG_DAMON_RECLAIM=y
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
CONFIG_TLS=m
# CONFIG_TLS_DEVICE is not set
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=m
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_IPV6_IOAM6_LWTUNNEL=y
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=y
# CONFIG_NETFILTER_XT_SET is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=y
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_TIME=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
# CONFIG_IP_SET_BITMAP_IPMAC is not set
# CONFIG_IP_SET_BITMAP_PORT is not set
# CONFIG_IP_SET_HASH_IP is not set
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=m
# CONFIG_IP_SET_HASH_MAC is not set
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
# CONFIG_IP_SET_LIST_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
# CONFIG_IP_VS_LBLCR is not set
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
CONFIG_IP_VS_TWOS=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
# end of DECnet: Netfilter Configuration

CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
# CONFIG_BRIDGE_EBT_MARK is not set
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
# CONFIG_BRIDGE_EBT_DNAT is not set
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
# CONFIG_TIPC_DIAG is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
# CONFIG_L2TP_IP is not set
# CONFIG_L2TP_ETH is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_BRIDGE_MRP=y
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_ATALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
# CONFIG_IEEE802154_SOCKET is not set
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_TAPRIO=m
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=m
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_CAKE=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
CONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_ACT_GATE=y
# CONFIG_NET_IFE_SKBMARK is not set
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=m
# CONFIG_OPENVSWITCH_GRE is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=m
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=m
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_QRTR=y
# CONFIG_QRTR_SMD is not set
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=y
# CONFIG_NET_NCSI is not set
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=m
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=y
# end of AX.25 network device drivers

CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
# CONFIG_CAN_SLCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIDTL1=m
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
CONFIG_BT_MTKUART=m
CONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
# CONFIG_CAIF_USB is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not set
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
# CONFIG_NFC_MEI_PHY is not set
# CONFIG_NFC_SIM is not set
CONFIG_NFC_VIRTUAL_NCI=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
# CONFIG_NFC_ST21NFCA_I2C is not set
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
# CONFIG_NFC_NXP_NCI_I2C is not set
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
# CONFIG_NFC_S3FWRN82_UART is not set
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices

# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=y

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCI_MESON=m
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
# CONFIG_CXL_PCI is not set
# CONFIG_CXL_ACPI is not set
CONFIG_CXL_PORT=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=m
# end of Bus devices

CONFIG_CONNECTOR=m

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_SMI=m
# CONFIG_GOOGLE_COREBOOT_TABLE is not set
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
# CONFIG_GNSS_MTK_SERIAL is not set
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_MCHP48L640=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_MXIC=m
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_ARASAN=y

#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=m

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
# CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE is not set
CONFIG_MTD_SPI_NOR_SWP_KEEP=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=m
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=y
CONFIG_HABANA_AI=y
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# end of SCSI device support

# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NTB_NETDEV is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_MHI_NET is not set
# CONFIG_ARCNET is not set
# CONFIG_CAIF_DRIVERS is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_DLINK_DIR685=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_IQS62X=y
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=m
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=m
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_JOYSTICK_QWIIC=y
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM80X_ONKEY is not set
CONFIG_INPUT_AD714X=y
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_BMA150=y
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX77693_HAPTIC=m
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=m
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_PCAP=y
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_IQS269A=y
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=m
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=m
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# end of PCMCIA character devices

# CONFIG_MWAVE is not set
# CONFIG_DEVMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_DEVPORT is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
# CONFIG_XILLYBUS_PCIE is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_NVIDIA_GPU=m
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MMIO=m
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_SC18IS602 is not set
CONFIG_SPI_SIFIVE=m
# CONFIG_SPI_MXIC is not set
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=m
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=m
CONFIG_SPMI_HISI3670=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_DA9062 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_SX150X is not set

#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
CONFIG_PINCTRL_CHERRYVIEW=y
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_MERRIFIELD=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not set
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=m
# CONFIG_PINCTRL_CEDARFORK is not set
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_ELKHARTLAKE=y
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=m
CONFIG_PINCTRL_JASPERLAKE=m
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_PINCTRL_TIGERLAKE=y
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_VX855=m
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
# CONFIG_GPIO_104_IDIO_16 is not set
CONFIG_GPIO_104_IDI_48=m
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=m
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9052=m
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP3943=y
# CONFIG_GPIO_LP873X is not set
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TPS68470 is not set
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_MERRIFIELD is not set
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
# CONFIG_GPIO_PISOSR is not set
CONFIG_GPIO_XRA1403=y
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers

CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=m
CONFIG_IP5XXX_POWER=m
CONFIG_MAX8925_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=m
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9052=m
CONFIG_BATTERY_DA9150=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=m
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_CROS_USBPD=m
# CONFIG_CHARGER_CROS_PCHG is not set
CONFIG_CHARGER_BD99954=m
CONFIG_CHARGER_WILCO=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AS370=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=m
# CONFIG_I8K is not set
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=y
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC2992=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX31730=m
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=y
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_STTS751=y
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA238=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_XGENE=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_SENSORS_ASUS_EC=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=y
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
CONFIG_INTEL_MENLOW=m
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC_DEV=m
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_INTEL_SOC_PMIC_MRFLD=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_ACPI=m
CONFIG_MFD_INTEL_LPSS_PCI=m
# CONFIG_MFD_INTEL_PMC_BXT is not set
CONFIG_MFD_IQS62X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=m
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=m
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
CONFIG_EZX_PCAP=y
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_WCD934X is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_DA9052=m
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LP8788 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX14577 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=m
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6315=m
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_SPMI=m
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RT5190A=y
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6245 is not set
CONFIG_REGULATOR_RTQ2134=m
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=m
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_QCOM_LABIBB=m
# CONFIG_RC_CORE is not set
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_CROS_EC=m
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=m
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_LCD_AMS369FG06=m
# CONFIG_LCD_LMS501KF03 is not set
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_ADP5520=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
CONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_COUGAR=m
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_XIAOMI=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=m
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=m
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEAM=m
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_UDRAW_PS3=m
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
CONFIG_HID_ALPS=m
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=m
# end of I2C HID support

CONFIG_I2C_HID_CORE=m

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=m
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_APU=m
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP8788=y
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA9052=m
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_MLXCPLD=m
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=y
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM36274=m
CONFIG_LEDS_TPS6105X=m

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AS3645A=y
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_MTD=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_LEDS_TRIGGER_PATTERN=y
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_LEDS_SIEMENS_SIMATIC_IPC=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
# CONFIG_INFINIBAND_ADDR_TRANS is not set
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
CONFIG_INFINIBAND_HFI1=y
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
CONFIG_SDMA_VERBOSITY=y
CONFIG_INFINIBAND_RDMAVT=y
# CONFIG_RDMA_RXE is not set
CONFIG_RDMA_SIW=y
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_OPA_VNIC=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=m
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
# CONFIG_EDAC_X38 is not set
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_LP8788 is not set
CONFIG_RTC_DRV_MAX6900=m
# CONFIG_RTC_DRV_MAX8907 is not set
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
# CONFIG_RTC_DRV_MAX6916 is not set
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=m
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RV3029_HWMON is not set
CONFIG_RTC_DRV_RX6110=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=m
# CONFIG_RTC_DRV_DS1685 is not set
CONFIG_RTC_DRV_DS1689=y
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_CROS_EC is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_RTC_DRV_WILCO_EC is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
CONFIG_DMABUF_SYSFS_STATS=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
# CONFIG_LCD2S is not set
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=m
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=m
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_VDPA=m
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VDPA=m
CONFIG_VDPA_USER=m
# CONFIG_IFCVF is not set
# CONFIG_VP_VDPA is not set
CONFIG_ALIBABA_ENI_VDPA=m
CONFIG_VHOST_IOTLB=m
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
# CONFIG_COMEDI_TEST is not set
# CONFIG_COMEDI_PARPORT is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=y
# CONFIG_COMEDI_8255_PCI is not set
CONFIG_COMEDI_ADDI_WATCHDOG=m
# CONFIG_COMEDI_ADDI_APCI_1032 is not set
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=y
# CONFIG_COMEDI_ADDI_APCI_2032 is not set
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=y
# CONFIG_COMEDI_ADL_PCI7X3X is not set
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
# CONFIG_COMEDI_ADV_PCI1720 is not set
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=y
CONFIG_COMEDI_ADV_PCI1760=m
CONFIG_COMEDI_ADV_PCI_DIO=y
# CONFIG_COMEDI_AMPLC_DIO200_PCI is not set
CONFIG_COMEDI_AMPLC_PC236_PCI=y
# CONFIG_COMEDI_AMPLC_PC263_PCI is not set
# CONFIG_COMEDI_AMPLC_PCI224 is not set
CONFIG_COMEDI_AMPLC_PCI230=m
# CONFIG_COMEDI_CONTEC_PCI_DIO is not set
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
# CONFIG_COMEDI_DYNA_PCI10XX is not set
CONFIG_COMEDI_GSC_HPDI=m
# CONFIG_COMEDI_MF6X4 is not set
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
# CONFIG_COMEDI_KE_COUNTER is not set
CONFIG_COMEDI_CB_PCIDAS64=m
# CONFIG_COMEDI_CB_PCIDAS is not set
CONFIG_COMEDI_CB_PCIDDA=y
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
# CONFIG_COMEDI_NI_6527 is not set
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
# CONFIG_COMEDI_NI_PCIDIO is not set
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
# CONFIG_COMEDI_PCMCIA_DRIVERS is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
# CONFIG_RTLLIB is not set
# CONFIG_FB_SM750 is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_UNISYSSPAR=y
# CONFIG_UNISYS_VISORNIC is not set
CONFIG_UNISYS_VISORINPUT=y
# CONFIG_FB_TFT is not set
CONFIG_PI433=y
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACPI_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
CONFIG_ADV_SWBUTTON=m
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_ASUS_WIRELESS=y
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_DCDBAS=y
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DELL_RBTN=m
CONFIG_DELL_SMBIOS=y
# CONFIG_DELL_SMBIOS_SMM is not set
CONFIG_DELL_SMO8800=m
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_GPD_POCKET_FAN=y
# CONFIG_HP_ACCEL is not set
CONFIG_WIRELESS_HOTKEY=y
CONFIG_IBM_RTL=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_ATOMISP2_PDX86=y
# CONFIG_INTEL_ATOMISP2_LED is not set
CONFIG_INTEL_ATOMISP2_PM=y
CONFIG_INTEL_SAR_INT1092=y
CONFIG_INTEL_SKL_INT3472=y
CONFIG_INTEL_PMC_CORE=y

#
# Intel Speed Select Technology interface support
#
CONFIG_INTEL_SPEED_SELECT_INTERFACE=y
# end of Intel Speed Select Technology interface support

#
# Intel Uncore Frequency Control
#
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
# end of Intel Uncore Frequency Control

CONFIG_INTEL_HID_EVENT=y
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_ISHTP_ECLITE=m
# CONFIG_INTEL_MRFLD_PWRBTN is not set
CONFIG_INTEL_PUNIT_IPC=y
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_VSEC is not set
CONFIG_MSI_LAPTOP=m
CONFIG_PCENGINES_APU2=y
CONFIG_BARCO_P50_GPIO=m
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=m
# CONFIG_ACPI_CMPC is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_SYSTEM76_ACPI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_SERIAL_MULTI_INSTANTIATE=m
CONFIG_MLX_PLATFORM=y
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_SIEMENS_SIMATIC_IPC=m
CONFIG_PMC_ATOM=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=m
# CONFIG_CHROMEOS_PSTORE is not set
# CONFIG_CHROMEOS_TBMC is not set
CONFIG_CROS_EC=m
# CONFIG_CROS_EC_I2C is not set
CONFIG_CROS_EC_ISHTP=m
# CONFIG_CROS_EC_SPI is not set
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CROS_EC_CHARDEV=m
# CONFIG_CROS_EC_LIGHTBAR is not set
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
# CONFIG_CROS_EC_SYSFS is not set
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_WILCO_EC=m
# CONFIG_WILCO_EC_DEBUGFS is not set
CONFIG_WILCO_EC_EVENTS=m
CONFIG_WILCO_EC_TELEMETRY=m
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_LMK04832=m
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_CLK_TWL6040 is not set
CONFIG_COMMON_CLK_PWM=y
CONFIG_XILINX_VCU=m
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_DMAR_PERF=y
CONFIG_DMAR_DEBUG=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEBUGFS=y
# CONFIG_INTEL_IOMMU_SVM is not set
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
# CONFIG_IRQ_REMAP is not set
CONFIG_VIRTIO_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=m

#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_INTEL_INT3496=m
CONFIG_EXTCON_INTEL_MRFLD=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_CROS_EC=m
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_NTB=y
CONFIG_NTB_MSI=y
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
CONFIG_NTB_INTEL=y
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_MSI_TEST is not set
CONFIG_NTB_TRANSPORT=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m
CONFIG_VME_FAKE=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
# CONFIG_VME_USER is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_DWC=m
# CONFIG_PWM_IQS620A is not set
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=y

#
# IRQ chip support
#
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=m
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_PXA_28NM_HSIC=m
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_USB4 is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=m
CONFIG_NVMEM_RMEM=m

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
# CONFIG_INTEL_TH_PCI is not set
# CONFIG_INTEL_TH_ACPI is not set
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_MSU=m
# CONFIG_INTEL_TH_PTI is not set
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=m
CONFIG_ALTERA_PR_IP_CORE=m
# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set
CONFIG_FPGA_MGR_ALTERA_CVP=m
CONFIG_FPGA_MGR_XILINX_SPI=m
# CONFIG_FPGA_MGR_MACHXO2_SPI is not set
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
# CONFIG_FPGA_DFL is not set
CONFIG_TEE=m

#
# TEE drivers
#
# end of TEE drivers

CONFIG_PM_OPP=y
CONFIG_UNISYS_VISORBUS=y
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=m
CONFIG_104_QUAD_8=m
CONFIG_INTERRUPT_CNT=m
# CONFIG_INTEL_QEP is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_DEBUG is not set
# end of Caches

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_CRAMFS_MTD is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=m
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4hc"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_RAM is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
CONFIG_CODA_FS=y
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
# CONFIG_AFS_DEBUG_CURSOR is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_ENCRYPTED_KEYS=m
CONFIG_USER_DECRYPTED_DATA=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=m
CONFIG_CRYPTO_CURVE25519_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=y
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
# CONFIG_CRYPTO_BLAKE2B is not set
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_BLAKE2S_X86=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA1_SSSE3=m
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM3=m
CONFIG_CRYPTO_LIB_SM4=m
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
CONFIG_CRC4=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_REF_TRACKER=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_BTF_TAG=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_FRAME_POINTER=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
CONFIG_NET_NS_REFCNT_TRACKER=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_PAGE_REF=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
# CONFIG_KASAN_STACK is not set
CONFIG_KASAN_VMALLOC=y
# CONFIG_KASAN_MODULE_TEST is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
CONFIG_CSD_LOCK_WAIT_DEBUG=y
CONFIG_PROVE_CXL_LOCKING=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
CONFIG_SAMPLE_TRACE_EVENTS=m
CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS=m
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_SAMPLE_TRACE_ARRAY=m
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_KPROBES=m
# CONFIG_SAMPLE_KRETPROBES is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_RPMSG_CLIENT is not set
CONFIG_SAMPLE_CONFIGFS=m
CONFIG_SAMPLE_CONNECTOR=m
# CONFIG_SAMPLE_FANOTIFY_ERROR is not set
# CONFIG_SAMPLE_HIDRAW is not set
# CONFIG_SAMPLE_LANDLOCK is not set
# CONFIG_SAMPLE_PIDFD is not set
CONFIG_SAMPLE_SECCOMP=y
CONFIG_SAMPLE_TIMER=y
CONFIG_SAMPLE_UHID=y
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_ANDROID_BINDERFS is not set
CONFIG_SAMPLE_VFS=y
# CONFIG_SAMPLE_INTEL_MEI is not set
CONFIG_SAMPLE_WATCHDOG=y
CONFIG_SAMPLE_WATCH_QUEUE=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
# CONFIG_UNWINDER_ORC is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
# CONFIG_KCOV_INSTRUMENT_ALL is not set
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 5163 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export category='functional'
	export timeout='10m'
	export job_origin='boot.yaml'
	export queue_cmdline_keys='branch
commit
kbuild_queue_analysis'
	export queue='validate'
	export testbox='vm-snb-120'
	export tbox_group='vm-snb'
	export branch='linux-review/Jason-A-Donenfeld/timekeeping-Add-raw-clock-fallback-for-random_get_entropy/20220505-082221'
	export commit='3aeaac747d194aa3cff28351b4a83267faa11b3a'
	export kconfig='x86_64-randconfig-a012-20220502'
	export repeat_to=6
	export stop_repeat_if_found=
	export nr_vm=160
	export submit_id='62734ccbcfa1ac070aed7d0d'
	export job_file='/lkp/jobs/scheduled/vm-snb-120/boot-1-debian-10.4-x86_64-20200603.cgz-3aeaac747d194aa3cff28351b4a83267faa11b3a-20220505-1802-1930d57-4.yaml'
	export id='c13a0564bc4b105a19a045b1b3d3c7dcb9d31cfd'
	export queuer_version='/zday/lkp'
	export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
	export nr_cpu=2
	export memory='16G'
	export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
	export ssh_base_port=23032
	export kernel_cmdline='vmalloc=128M initramfs_async=0 page_owner=on'
	export rootfs='debian-10.4-x86_64-20200603.cgz'
	export compiler='clang-15'
	export enqueue_time='2022-05-05 12:04:27 +0800'
	export _id='62734ccbcfa1ac070aed7d0f'
	export _rt='/result/boot/1/vm-snb/debian-10.4-x86_64-20200603.cgz/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a'
	export user='lkp'
	export LKP_SERVER='internal-lkp-server'
	export result_root='/result/boot/1/vm-snb/debian-10.4-x86_64-20200603.cgz/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/3'
	export scheduler_version='/lkp/lkp/.src-20220505-113744'
	export arch='x86_64'
	export max_uptime=600
	export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
	export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-snb/debian-10.4-x86_64-20200603.cgz/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/3
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/vmlinuz-5.18.0-rc5-00017-g3aeaac747d19
branch=linux-review/Jason-A-Donenfeld/timekeeping-Add-raw-clock-fallback-for-random_get_entropy/20220505-082221
job=/lkp/jobs/scheduled/vm-snb-120/boot-1-debian-10.4-x86_64-20200603.cgz-3aeaac747d194aa3cff28351b4a83267faa11b3a-20220505-1802-1930d57-4.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-randconfig-a012-20220502
commit=3aeaac747d194aa3cff28351b4a83267faa11b3a
vmalloc=128M initramfs_async=0 page_owner=on
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/modules.cgz'
	export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20220105.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export schedule_notify_address=
	export kbuild_queue_analysis=1
	export kernel='/pkg/linux/x86_64-randconfig-a012-20220502/clang-15/3aeaac747d194aa3cff28351b4a83267faa11b3a/vmlinuz-5.18.0-rc5-00017-g3aeaac747d19'
	export dequeue_time='2022-05-05 12:04:47 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-snb-120/boot-1-debian-10.4-x86_64-20200603.cgz-3aeaac747d194aa3cff28351b4a83267faa11b3a-20220505-1802-1930d57-4.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper sleep
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 2432 bytes --]

Re: [timekeeping] 3aeaac747d: PANIC:early_exception

[Thomas Gleixner]

On Fri, May 06 2022 at 11:20, kernel test robot wrote:
> PANIC: early exception 0x0d IP 10:ffffffff812cef11 error 0 cr2 0xffff888004a3aff8
> [ 0.000000][ T0] add_device_randomness (kbuild/src/rand-3/drivers/char/random.c:1028) 
> [ 0.000000][ T0] ? dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:470) 
> [ 0.000000][ T0] dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:151) 
> [ 0.000000][ T0] dmi_present (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:605)

Duh.

So this wants to be:

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2380,6 +2381,20 @@ static int timekeeping_validate_timex(co
 	return 0;
 }
 
+/**
+ * random_get_entropy_fallback - Returns the raw clock source value,
+ * used by random.c for platforms with no valid random_get_entropy().
+ */
+unsigned long random_get_entropy_fallback(void)
+{
+	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
+	struct clocksource *clock = READ_ONCE(tkr->clock);
+
+	if (!timekeeping_suspended && clock)
+		return clock->read(clock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
 
 /**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function

Re: [timekeeping] 3aeaac747d: PANIC:early_exception

[Thomas Gleixner]

[-- Attachment #1: Type: text/plain, Size: 1218 bytes --]

On Fri, May 06 2022 at 11:20, kernel test robot wrote:
> PANIC: early exception 0x0d IP 10:ffffffff812cef11 error 0 cr2 0xffff888004a3aff8
> [ 0.000000][ T0] add_device_randomness (kbuild/src/rand-3/drivers/char/random.c:1028) 
> [ 0.000000][ T0] ? dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:470) 
> [ 0.000000][ T0] dmi_walk_early (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:151) 
> [ 0.000000][ T0] dmi_present (kbuild/src/rand-3/drivers/firmware/dmi_scan.c:605)

Duh.

So this wants to be:

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2380,6 +2381,20 @@ static int timekeeping_validate_timex(co
 	return 0;
 }
 
+/**
+ * random_get_entropy_fallback - Returns the raw clock source value,
+ * used by random.c for platforms with no valid random_get_entropy().
+ */
+unsigned long random_get_entropy_fallback(void)
+{
+	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
+	struct clocksource *clock = READ_ONCE(tkr->clock);
+
+	if (!timekeeping_suspended && clock)
+		return clock->read(clock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
 
 /**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function

Re: [timekeeping] 3aeaac747d: PANIC:early_exception

[Jason A. Donenfeld]

Hi Thomas,

On Fri, May 06, 2022 at 09:59:13AM +0200, Thomas Gleixner wrote:
> +/**
> + * random_get_entropy_fallback - Returns the raw clock source value,
> + * used by random.c for platforms with no valid random_get_entropy().
> + */
> +unsigned long random_get_entropy_fallback(void)
> +{
> +	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
> +	struct clocksource *clock = READ_ONCE(tkr->clock);
> +
> +	if (!timekeeping_suspended && clock)
> +		return clock->read(clock);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(random_get_entropy_fallback);

I tried to address this already in
<https://lore.kernel.org/lkml/20220505002910.IAcnpEOE2zR2ibERl4Lh3Y_PMmtb0Rf43lVevgztJiM@z/>,
though yours looks better with the READ_ONCE() around clock, and I'll
send a v8 doing it that way. I didn't realize that clock could become
NULL again after becoming non-NULL.

I'm not quite sure I understand the purpose of !timekeeping_suspended
there, though. I'm not seeing the path where reading with it suspended
negatively affects things. I'll take your word for it though.

Jason

Re: [timekeeping] 3aeaac747d: PANIC:early_exception

[Jason A. Donenfeld]

[-- Attachment #1: Type: text/plain, Size: 1099 bytes --]

Hi Thomas,

On Fri, May 06, 2022 at 09:59:13AM +0200, Thomas Gleixner wrote:
> +/**
> + * random_get_entropy_fallback - Returns the raw clock source value,
> + * used by random.c for platforms with no valid random_get_entropy().
> + */
> +unsigned long random_get_entropy_fallback(void)
> +{
> +	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
> +	struct clocksource *clock = READ_ONCE(tkr->clock);
> +
> +	if (!timekeeping_suspended && clock)
> +		return clock->read(clock);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(random_get_entropy_fallback);

I tried to address this already in
<https://lore.kernel.org/lkml/20220505002910.IAcnpEOE2zR2ibERl4Lh3Y_PMmtb0Rf43lVevgztJiM@z/>,
though yours looks better with the READ_ONCE() around clock, and I'll
send a v8 doing it that way. I didn't realize that clock could become
NULL again after becoming non-NULL.

I'm not quite sure I understand the purpose of !timekeeping_suspended
there, though. I'm not seeing the path where reading with it suspended
negatively affects things. I'll take your word for it though.

Jason

[PATCH v8] timekeeping: Add raw clock fallback for random_get_entropy()

[Jason A. Donenfeld]

The addition of random_get_entropy_fallback() provides access to
whichever time source has the highest frequency, which is useful for
gathering entropy on platforms without available cycle counters. It's
not necessarily as good as being able to quickly access a cycle counter
that the CPU has, but it's still something, even when it falls back to
being jiffies-based.

In the event that a given arch does not define get_cycles(), falling
back to the get_cycles() default implementation that returns 0 is really
not the best we can do. Instead, at least calling
random_get_entropy_fallback() would be preferable, because that always
needs to return _something_, even falling back to jiffies eventually.
It's not as though random_get_entropy_fallback() is super high precision
or guaranteed to be entropic, but basically anything that's not zero all
the time is better than returning zero all the time.

Finally, since random_get_entropy_fallback() is used during extremely
early boot when randomizing freelists in mm_init(), it can be called
before timekeeping has been initialized. In that case there really is
nothing we can do; jiffies hasn't even started ticking yet. So just give
up and return 0.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
---
Changes v7->v8:
- Use READ_ONCE around clock and check timekeeping_suspended before
  reading, suggested by Thomas.

Changes v6->v7:
- Return 0 if we're called before timekeeping has been initialized,
  reported by Nathan.

 include/linux/timex.h     |  8 ++++++++
 kernel/time/timekeeping.c | 15 +++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/linux/timex.h b/include/linux/timex.h
index 5745c90c8800..3871b06bd302 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -62,6 +62,8 @@
 #include <linux/types.h>
 #include <linux/param.h>
 
+unsigned long random_get_entropy_fallback(void);
+
 #include <asm/timex.h>
 
 #ifndef random_get_entropy
@@ -74,8 +76,14 @@
  *
  * By default we use get_cycles() for this purpose, but individual
  * architectures may override this in their asm/timex.h header file.
+ * If a given arch does not have get_cycles(), then we fallback to
+ * using random_get_entropy_fallback().
  */
+#ifdef get_cycles
 #define random_get_entropy()	((unsigned long)get_cycles())
+#else
+#define random_get_entropy()	random_get_entropy_fallback()
+#endif
 #endif
 
 /*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index dcdcb85121e4..461d17c0f3d6 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -17,6 +17,7 @@
 #include <linux/clocksource.h>
 #include <linux/jiffies.h>
 #include <linux/time.h>
+#include <linux/timex.h>
 #include <linux/tick.h>
 #include <linux/stop_machine.h>
 #include <linux/pvclock_gtod.h>
@@ -2380,6 +2381,20 @@ static int timekeeping_validate_timex(const struct __kernel_timex *txc)
 	return 0;
 }
 
+/**
+ * random_get_entropy_fallback - Returns the raw clock source value,
+ * used by random.c for platforms with no valid random_get_entropy().
+ */
+unsigned long random_get_entropy_fallback(void)
+{
+	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
+	struct clocksource *clock = READ_ONCE(tkr->clock);
+
+	if (unlikely(timekeeping_suspended || !clock))
+		return 0;
+	return clock->read(clock);
+}
+EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
 
 /**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function
-- 
2.35.1

Re: [timekeeping] 3aeaac747d: PANIC:early_exception

[Thomas Gleixner]

On Fri, May 06 2022 at 12:12, Jason A. Donenfeld wrote:
> On Fri, May 06, 2022 at 09:59:13AM +0200, Thomas Gleixner wrote:
>> +/**
>> + * random_get_entropy_fallback - Returns the raw clock source value,
>> + * used by random.c for platforms with no valid random_get_entropy().
>> + */
>> +unsigned long random_get_entropy_fallback(void)
>> +{
>> +	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
>> +	struct clocksource *clock = READ_ONCE(tkr->clock);
>> +
>> +	if (!timekeeping_suspended && clock)
>> +		return clock->read(clock);
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
>
> I tried to address this already in
> <https://lore.kernel.org/lkml/20220505002910.IAcnpEOE2zR2ibERl4Lh3Y_PMmtb0Rf43lVevgztJiM@z/>,
> though yours looks better with the READ_ONCE() around clock, and I'll
> send a v8 doing it that way. I didn't realize that clock could become
> NULL again after becoming non-NULL.

This happens at early boot where clock is NULL.

> I'm not quite sure I understand the purpose of !timekeeping_suspended
> there, though. I'm not seeing the path where reading with it suspended
> negatively affects things. I'll take your word for it though.

Some clocks are not accessible during suspend.

Thanks,

        tglx

Re: [timekeeping] 3aeaac747d: PANIC:early_exception

[Thomas Gleixner]

[-- Attachment #1: Type: text/plain, Size: 1294 bytes --]

On Fri, May 06 2022 at 12:12, Jason A. Donenfeld wrote:
> On Fri, May 06, 2022 at 09:59:13AM +0200, Thomas Gleixner wrote:
>> +/**
>> + * random_get_entropy_fallback - Returns the raw clock source value,
>> + * used by random.c for platforms with no valid random_get_entropy().
>> + */
>> +unsigned long random_get_entropy_fallback(void)
>> +{
>> +	struct tk_read_base *tkr = &tk_core.timekeeper.tkr_mono;
>> +	struct clocksource *clock = READ_ONCE(tkr->clock);
>> +
>> +	if (!timekeeping_suspended && clock)
>> +		return clock->read(clock);
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(random_get_entropy_fallback);
>
> I tried to address this already in
> <https://lore.kernel.org/lkml/20220505002910.IAcnpEOE2zR2ibERl4Lh3Y_PMmtb0Rf43lVevgztJiM@z/>,
> though yours looks better with the READ_ONCE() around clock, and I'll
> send a v8 doing it that way. I didn't realize that clock could become
> NULL again after becoming non-NULL.

This happens at early boot where clock is NULL.

> I'm not quite sure I understand the purpose of !timekeeping_suspended
> there, though. I'm not seeing the path where reading with it suspended
> negatively affects things. I'll take your word for it though.

Some clocks are not accessible during suspend.

Thanks,

        tglx

Re: [PATCH v6 12/17] nios2: use fallback for random_get_entropy() instead of zero

[Dinh Nguyen]

On 4/23/22 16:26, Jason A. Donenfeld wrote:
> In the event that random_get_entropy() can't access a cycle counter or
> similar, falling back to returning 0 is really not the best we can do.
> Instead, at least calling random_get_entropy_fallback() would be
> preferable, because that always needs to return _something_, even
> falling back to jiffies eventually. It's not as though
> random_get_entropy_fallback() is super high precision or guaranteed to
> be entropic, but basically anything that's not zero all the time is
> better than returning zero all the time.
> 
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Dinh Nguyen <dinguyen@kernel.org>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> ---
>   arch/nios2/include/asm/timex.h | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/nios2/include/asm/timex.h b/arch/nios2/include/asm/timex.h
> index a769f871b28d..40a1adc9bd03 100644
> --- a/arch/nios2/include/asm/timex.h
> +++ b/arch/nios2/include/asm/timex.h
> @@ -8,5 +8,8 @@
>   typedef unsigned long cycles_t;
>   
>   extern cycles_t get_cycles(void);
> +#define get_cycles get_cycles
> +
> +#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
>   
>   #endif

Acked-by: Dinh Nguyen <dinguyen@kernel.org>

Re: [PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Jason A. Donenfeld]

Hey Maciej,

On Wed, Apr 27, 2022 at 3:29 AM Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>
> Hey Maciej,
>
> On Tue, Apr 26, 2022 at 09:28:39PM +0100, Maciej W. Rozycki wrote:
> > On Sat, 23 Apr 2022, Jason A. Donenfeld wrote:
> >
> > > diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
> > > index b05bb70a2e46..8cfa485d19e6 100644
> > > --- a/arch/mips/include/asm/timex.h
> > > +++ b/arch/mips/include/asm/timex.h
> > [...]
> > > +   if (cpu_has_3kex)
> > > +           c0_random = (read_c0_random() >> 8) & 0x3f;
> >
> >  Hmm, I wonder whether we do need to mask the contents of the register out
> > here given that known implementations return zeros in reserved bits.  Even
> > though R3000 documentation I have access to makes no guarantee as to the
> > values of the reserved bits here I think we can safely proceed according
> > to what systems we do actually support do (even though it only saves one
> > instruction).
> >
> > >     else
> > > -           return 0;       /* no usable register */
> > > +           c0_random = read_c0_random() & 0x3f;
> >
> >  Here the architecture guarantees unused bits to be zero, but the number
> > of them varies between implementations.  However we'll only ever use this
> > leg for the R4000/R4400 processors, which have 48 TLB entries, and for the
> > Ingenic XBurst cores, which I have now verified in documentation (which
> > user-reported dumps from /proc/cpuinfo are consistent with) that have 32
> > TLB entries.  So I think this mask operation can go as well.
> >
> >  I guess these updates can be made with a follow-up change though.
>
> There is lots of optimization potential on a few fronts we've identified
> in this thread. Let's save these for a follow-up. I'd rather this
> initial one be at least somewhat simple, so that as it gets optimized,
> it'll be easy to handle regressions. Also, it probably makes sense for
> you to send the patches for these, since you have both the hardware
> chops and the hardware itself to assess these ideas. I am interested in
> the topic though, so please do CC me.

Everything has been upstream for a little while now, which means
development of this can move back to the proper MIPS tree like normal.
Did you want to submit some optimizations? Would be happy to look at
whatever you have in mind.

Jason

Re: [PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Maciej W. Rozycki]

Hi Jason,

> > There is lots of optimization potential on a few fronts we've identified
> > in this thread. Let's save these for a follow-up. I'd rather this
> > initial one be at least somewhat simple, so that as it gets optimized,
> > it'll be easy to handle regressions. Also, it probably makes sense for
> > you to send the patches for these, since you have both the hardware
> > chops and the hardware itself to assess these ideas. I am interested in
> > the topic though, so please do CC me.
> 
> Everything has been upstream for a little while now, which means
> development of this can move back to the proper MIPS tree like normal.
> Did you want to submit some optimizations? Would be happy to look at
> whatever you have in mind.

 Thank you for the heads-up!

 Unfortunately I'm a little stuck at the moment, especially as one of my
main MIPS machines (a 5Kc Malta system) died mid-May while operating.  It 
seems to be a faulty CPU core card and the base board may be fine, though 
I cannot know for sure as I only have one each and I don't have a logic 
analyser or at least a JTAG probe to peek at the system and see what's 
going on inside.

 If anyone knows a source of a replacement Malta, preferably with a 5Kc 
CoreLV CPU module or another 64-bit hard core card (a number of different 
ones have been made), then I'll appreciate if you let me know.  I feel 
rather depressed knowing that many if not most hit the scrapper already 
while they could still find a good use.  Somehow it is easier to get way 
more obsolete hardware from 1980/90s just because it was general purpose 
rather than niche.

 Otherwise I'll try to get back to this stuff later in the year with 
whatever I have that still runs, but don't hold your breath.  Sorry!

  Maciej

Re: [PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Jason A. Donenfeld]

Hey Maciej,

On Fri, Jun 24, 2022 at 02:25:17PM +0100, Maciej W. Rozycki wrote:
> Hi Jason,
> 
> > > There is lots of optimization potential on a few fronts we've identified
> > > in this thread. Let's save these for a follow-up. I'd rather this
> > > initial one be at least somewhat simple, so that as it gets optimized,
> > > it'll be easy to handle regressions. Also, it probably makes sense for
> > > you to send the patches for these, since you have both the hardware
> > > chops and the hardware itself to assess these ideas. I am interested in
> > > the topic though, so please do CC me.
> > 
> > Everything has been upstream for a little while now, which means
> > development of this can move back to the proper MIPS tree like normal.
> > Did you want to submit some optimizations? Would be happy to look at
> > whatever you have in mind.
> 
>  Thank you for the heads-up!
> 
>  Unfortunately I'm a little stuck at the moment, especially as one of my
> main MIPS machines (a 5Kc Malta system) died mid-May while operating.  It 
> seems to be a faulty CPU core card and the base board may be fine, though 
> I cannot know for sure as I only have one each and I don't have a logic 
> analyser or at least a JTAG probe to peek at the system and see what's 
> going on inside.
> 
>  If anyone knows a source of a replacement Malta, preferably with a 5Kc 
> CoreLV CPU module or another 64-bit hard core card (a number of different 
> ones have been made), then I'll appreciate if you let me know.  I feel 
> rather depressed knowing that many if not most hit the scrapper already 
> while they could still find a good use.  Somehow it is easier to get way 
> more obsolete hardware from 1980/90s just because it was general purpose 
> rather than niche.
> 
>  Otherwise I'll try to get back to this stuff later in the year with 
> whatever I have that still runs, but don't hold your breath.  Sorry!
> 
>   Maciej

Just thought I'd poke you about this, on the off chance that you found
some new hardware and feel like tinkering around with cycle counters
again. Some old MIPS platforms were recently dropped, too, which makes
me wonder whether there's some room for more simplification here.

Jason

Re: [PATCH v6 09/17] mips: use fallback for random_get_entropy() instead of just c0 random

[Maciej W. Rozycki]

Hi Jason,

> >  Unfortunately I'm a little stuck at the moment, especially as one of my
> > main MIPS machines (a 5Kc Malta system) died mid-May while operating.  It 
> > seems to be a faulty CPU core card and the base board may be fine, though 
> > I cannot know for sure as I only have one each and I don't have a logic 
> > analyser or at least a JTAG probe to peek at the system and see what's 
> > going on inside.
> > 
> >  If anyone knows a source of a replacement Malta, preferably with a 5Kc 
> > CoreLV CPU module or another 64-bit hard core card (a number of different 
> > ones have been made), then I'll appreciate if you let me know.  I feel 
> > rather depressed knowing that many if not most hit the scrapper already 
> > while they could still find a good use.  Somehow it is easier to get way 
> > more obsolete hardware from 1980/90s just because it was general purpose 
> > rather than niche.
> > 
> >  Otherwise I'll try to get back to this stuff later in the year with 
> > whatever I have that still runs, but don't hold your breath.  Sorry!
> 
> Just thought I'd poke you about this, on the off chance that you found
> some new hardware and feel like tinkering around with cycle counters
> again. Some old MIPS platforms were recently dropped, too, which makes
> me wonder whether there's some room for more simplification here.

 I have a replacement CPU module now, but it is not the same as the old 
one was and it has a built-in different system controller (a MIPS SOC-it 
IP implementation) rather than a discrete Galileo GT-64120A chip the 
original module had.

 And the system controller suffers from PCI handling issues, i.e. the 
YAMON firmware hangs in PCI enumeration if there are more than 2 buses 
present (my configuration used to have 3) and in Linux one of the option 
cards seems not to respond to MMIO accesses (a mapping error?), with 
exactly the same hardware configuration that worked just fine with the 
Galileo.  I had to pull some hardware to make the system boot at all.

 It's not clear to me yet if these are symptoms of hardware errata or bugs 
in the respective pieces of software, but I fear debugging fatal issues 
has to take precedence over optimisations for me, so I have to defer cycle 
counter tinkering yet more.

 NB the replacement CPU module is also 32-bit rather than 64-bit as the 
broken one was and therefore I'm still looking for a replacement 64-bit 
CPU module.  Malta CPU modules seem exceedingly scarce nowadays, it seems 
easier to track down a 30 years old MIPS R3000 DECstation machine, sigh...

  Maciej