[PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Kajol Jain]

Patch set adds a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Patch 1 of the patch-set adds a comment about current state of
PERF_MEM_LVL_* namespace and remove an extra line present in
perf_mem__lvl_scnprintf function.

Patch 2 & 3 adds tool and kernel side changes to add mem_hops field.

Patch 4 of the patch-set fix the data source encodings to represent
L2.1/L3.1 cache access data for powerpc platform.

Changelog:
v2 -> v3
- Since added field HOPS related to NUMA, update the data presented
  by HOPS_0 to denotes accesses from 'remote core, same node' as
  suggested by Peter Zijlstra.

- Link to the patchset v2: https://lkml.org/lkml/2021/10/5/271

v1 -> v2:
- Rather then adding new macros for L2.1/L3.1 (same chip, different
  core) entries as part of field lvlnum, we are introducing new field
  called 'mem_hops' which can be used to get hops
  level data(intra-chip/package or inter-chip/off-package details).
  As suggested by Peter Zijlstra.

- Using OnChip to denote data accesses from 'another core of same chip'
  is not too clear. Update it to 'remote core, same chip' as pointed by
  Michael Ellerman.

- Update the fix patch of correcting data source encodings to use new
  added field 'mem_hops'

- Link to the patchset v1: https://lkml.org/lkml/2021/9/4/37

Kajol Jain (4):
  perf: Add comment about current state of PERF_MEM_LVL_* namespace and
    remove an extra line
  perf: Add mem_hops field in perf_mem_data_src structure
  tools/perf: Add mem_hops field in perf_mem_data_src structure
  powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses

 arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
 arch/powerpc/perf/isa207-common.h     |  2 ++
 include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
 tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
 tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
 5 files changed, 73 insertions(+), 13 deletions(-)

-- 
2.26.2

[PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Kajol Jain]

Patch set adds a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Patch 1 of the patch-set adds a comment about current state of
PERF_MEM_LVL_* namespace and remove an extra line present in
perf_mem__lvl_scnprintf function.

Patch 2 & 3 adds tool and kernel side changes to add mem_hops field.

Patch 4 of the patch-set fix the data source encodings to represent
L2.1/L3.1 cache access data for powerpc platform.

Changelog:
v2 -> v3
- Since added field HOPS related to NUMA, update the data presented
  by HOPS_0 to denotes accesses from 'remote core, same node' as
  suggested by Peter Zijlstra.

- Link to the patchset v2: https://lkml.org/lkml/2021/10/5/271

v1 -> v2:
- Rather then adding new macros for L2.1/L3.1 (same chip, different
  core) entries as part of field lvlnum, we are introducing new field
  called 'mem_hops' which can be used to get hops
  level data(intra-chip/package or inter-chip/off-package details).
  As suggested by Peter Zijlstra.

- Using OnChip to denote data accesses from 'another core of same chip'
  is not too clear. Update it to 'remote core, same chip' as pointed by
  Michael Ellerman.

- Update the fix patch of correcting data source encodings to use new
  added field 'mem_hops'

- Link to the patchset v1: https://lkml.org/lkml/2021/9/4/37

Kajol Jain (4):
  perf: Add comment about current state of PERF_MEM_LVL_* namespace and
    remove an extra line
  perf: Add mem_hops field in perf_mem_data_src structure
  tools/perf: Add mem_hops field in perf_mem_data_src structure
  powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses

 arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
 arch/powerpc/perf/isa207-common.h     |  2 ++
 include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
 tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
 tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
 5 files changed, 73 insertions(+), 13 deletions(-)

-- 
2.26.2

[PATCH v3 1/4] perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line

[Kajol Jain]

Add a comment about PERF_MEM_LVL_* namespace being depricated
to some extent in favour of added PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_}
fields.

Remove an extra line present in perf_mem__lvl_scnprintf function.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 include/uapi/linux/perf_event.h       | 8 +++++++-
 tools/include/uapi/linux/perf_event.h | 8 +++++++-
 tools/perf/util/mem-events.c          | 1 -
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index f92880a15645..e1701e9c7858 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1241,7 +1241,13 @@ union perf_mem_data_src {
 #define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
 #define PERF_MEM_OP_SHIFT	0
 
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
 #define PERF_MEM_LVL_NA		0x01  /* not available */
 #define PERF_MEM_LVL_HIT	0x02  /* hit level */
 #define PERF_MEM_LVL_MISS	0x04  /* miss level  */
diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index f92880a15645..e1701e9c7858 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -1241,7 +1241,13 @@ union perf_mem_data_src {
 #define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
 #define PERF_MEM_OP_SHIFT	0
 
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
 #define PERF_MEM_LVL_NA		0x01  /* not available */
 #define PERF_MEM_LVL_HIT	0x02  /* hit level */
 #define PERF_MEM_LVL_MISS	0x04  /* miss level  */
diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c
index f0e75df72b80..ff7289e28192 100644
--- a/tools/perf/util/mem-events.c
+++ b/tools/perf/util/mem-events.c
@@ -320,7 +320,6 @@ int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 	/* already taken care of */
 	m &= ~(PERF_MEM_LVL_HIT|PERF_MEM_LVL_MISS);
 
-
 	if (mem_info && mem_info->data_src.mem_remote) {
 		strcat(out, "Remote ");
 		l += 7;
-- 
2.26.2

[PATCH v3 1/4] perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line

[Kajol Jain]

Add a comment about PERF_MEM_LVL_* namespace being depricated
to some extent in favour of added PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_}
fields.

Remove an extra line present in perf_mem__lvl_scnprintf function.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 include/uapi/linux/perf_event.h       | 8 +++++++-
 tools/include/uapi/linux/perf_event.h | 8 +++++++-
 tools/perf/util/mem-events.c          | 1 -
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index f92880a15645..e1701e9c7858 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1241,7 +1241,13 @@ union perf_mem_data_src {
 #define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
 #define PERF_MEM_OP_SHIFT	0
 
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
 #define PERF_MEM_LVL_NA		0x01  /* not available */
 #define PERF_MEM_LVL_HIT	0x02  /* hit level */
 #define PERF_MEM_LVL_MISS	0x04  /* miss level  */
diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index f92880a15645..e1701e9c7858 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -1241,7 +1241,13 @@ union perf_mem_data_src {
 #define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
 #define PERF_MEM_OP_SHIFT	0
 
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
 #define PERF_MEM_LVL_NA		0x01  /* not available */
 #define PERF_MEM_LVL_HIT	0x02  /* hit level */
 #define PERF_MEM_LVL_MISS	0x04  /* miss level  */
diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c
index f0e75df72b80..ff7289e28192 100644
--- a/tools/perf/util/mem-events.c
+++ b/tools/perf/util/mem-events.c
@@ -320,7 +320,6 @@ int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 	/* already taken care of */
 	m &= ~(PERF_MEM_LVL_HIT|PERF_MEM_LVL_MISS);
 
-
 	if (mem_info && mem_info->data_src.mem_remote) {
 		strcat(out, "Remote ");
 		l += 7;
-- 
2.26.2

[PATCH v3 2/4] perf: Add mem_hops field in perf_mem_data_src structure

[Kajol Jain]

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

For ex: Encodings for mem_hops fields with L2 cache:

L2			- local L2
L2 | REMOTE | HOPS_0	- remote core, same node L2

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 include/uapi/linux/perf_event.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index e1701e9c7858..2fc09579e24a 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1210,14 +1210,16 @@ union perf_mem_data_src {
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_blk:3,	/* access blocked */
-			mem_rsvd:21;
+			mem_hops:3,	/* hop level */
+			mem_rsvd:18;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:21,
+		__u64	mem_rsvd:18,
+			mem_hops:3,	/* hop level */
 			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
@@ -1313,6 +1315,11 @@ union perf_mem_data_src {
 #define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
 #define PERF_MEM_BLK_SHIFT	40
 
+/* hop level */
+#define PERF_MEM_HOPS_0		0x01 /* remote core, same node */
+/* 2-7 available */
+#define PERF_MEM_HOPS_SHIFT	43
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 
-- 
2.26.2

[PATCH v3 2/4] perf: Add mem_hops field in perf_mem_data_src structure

[Kajol Jain]

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

For ex: Encodings for mem_hops fields with L2 cache:

L2			- local L2
L2 | REMOTE | HOPS_0	- remote core, same node L2

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 include/uapi/linux/perf_event.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index e1701e9c7858..2fc09579e24a 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1210,14 +1210,16 @@ union perf_mem_data_src {
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_blk:3,	/* access blocked */
-			mem_rsvd:21;
+			mem_hops:3,	/* hop level */
+			mem_rsvd:18;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:21,
+		__u64	mem_rsvd:18,
+			mem_hops:3,	/* hop level */
 			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
@@ -1313,6 +1315,11 @@ union perf_mem_data_src {
 #define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
 #define PERF_MEM_BLK_SHIFT	40
 
+/* hop level */
+#define PERF_MEM_HOPS_0		0x01 /* remote core, same node */
+/* 2-7 available */
+#define PERF_MEM_HOPS_SHIFT	43
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 
-- 
2.26.2

[PATCH v3 3/4] tools/perf: Add mem_hops field in perf_mem_data_src structure

[Kajol Jain]

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

Add functionality to represent mem_hop field data in
perf_mem__lvl_scnprintf function with the help of added string
array called mem_hops.

For ex: Encodings for mem_hops fields with L2 cache:

L2                      - local L2
L2 | REMOTE | HOPS_0    - remote core, same node L2

Since with the addition of HOPS field, now remote can be used to
denote cache access from the same node but different core, a check
is added in the c2c_decode_stats function to set mrem only when HOPS
is zero along with set remote field.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 tools/include/uapi/linux/perf_event.h | 11 +++++++++--
 tools/perf/util/mem-events.c          | 19 ++++++++++++++++++-
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index e1701e9c7858..2fc09579e24a 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -1210,14 +1210,16 @@ union perf_mem_data_src {
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_blk:3,	/* access blocked */
-			mem_rsvd:21;
+			mem_hops:3,	/* hop level */
+			mem_rsvd:18;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:21,
+		__u64	mem_rsvd:18,
+			mem_hops:3,	/* hop level */
 			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
@@ -1313,6 +1315,11 @@ union perf_mem_data_src {
 #define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
 #define PERF_MEM_BLK_SHIFT	40
 
+/* hop level */
+#define PERF_MEM_HOPS_0		0x01 /* remote core, same node */
+/* 2-7 available */
+#define PERF_MEM_HOPS_SHIFT	43
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 
diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c
index ff7289e28192..3167b4628b6d 100644
--- a/tools/perf/util/mem-events.c
+++ b/tools/perf/util/mem-events.c
@@ -301,6 +301,16 @@ static const char * const mem_lvlnum[] = {
 	[PERF_MEM_LVLNUM_NA] = "N/A",
 };
 
+static const char * const mem_hops[] = {
+	"N/A",
+	/*
+	 * While printing, 'Remote' will be added to represent
+	 * 'Remote core, same node' accesses as remote field need
+	 * to be set with mem_hops field.
+	 */
+	"core, same node",
+};
+
 int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 {
 	size_t i, l = 0;
@@ -325,6 +335,9 @@ int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 		l += 7;
 	}
 
+	if (mem_info && mem_info->data_src.mem_hops)
+		l += scnprintf(out + l, sz - l, "%s ", mem_hops[mem_info->data_src.mem_hops]);
+
 	printed = 0;
 	for (i = 0; m && i < ARRAY_SIZE(mem_lvl); i++, m >>= 1) {
 		if (!(m & 0x1))
@@ -471,8 +484,12 @@ int c2c_decode_stats(struct c2c_stats *stats, struct mem_info *mi)
 	/*
 	 * Skylake might report unknown remote level via this
 	 * bit, consider it when evaluating remote HITMs.
+	 *
+	 * Incase of power, remote field can also be used to denote cache
+	 * accesses from the another core of same node. Hence, setting
+	 * mrem only when HOPS is zero along with set remote field.
 	 */
-	bool mrem  = data_src->mem_remote;
+	bool mrem  = (data_src->mem_remote && !data_src->mem_hops);
 	int err = 0;
 
 #define HITM_INC(__f)		\
-- 
2.26.2

[PATCH v3 3/4] tools/perf: Add mem_hops field in perf_mem_data_src structure

[Kajol Jain]

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

Add functionality to represent mem_hop field data in
perf_mem__lvl_scnprintf function with the help of added string
array called mem_hops.

For ex: Encodings for mem_hops fields with L2 cache:

L2                      - local L2
L2 | REMOTE | HOPS_0    - remote core, same node L2

Since with the addition of HOPS field, now remote can be used to
denote cache access from the same node but different core, a check
is added in the c2c_decode_stats function to set mrem only when HOPS
is zero along with set remote field.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 tools/include/uapi/linux/perf_event.h | 11 +++++++++--
 tools/perf/util/mem-events.c          | 19 ++++++++++++++++++-
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index e1701e9c7858..2fc09579e24a 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -1210,14 +1210,16 @@ union perf_mem_data_src {
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_blk:3,	/* access blocked */
-			mem_rsvd:21;
+			mem_hops:3,	/* hop level */
+			mem_rsvd:18;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:21,
+		__u64	mem_rsvd:18,
+			mem_hops:3,	/* hop level */
 			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
@@ -1313,6 +1315,11 @@ union perf_mem_data_src {
 #define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
 #define PERF_MEM_BLK_SHIFT	40
 
+/* hop level */
+#define PERF_MEM_HOPS_0		0x01 /* remote core, same node */
+/* 2-7 available */
+#define PERF_MEM_HOPS_SHIFT	43
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 
diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c
index ff7289e28192..3167b4628b6d 100644
--- a/tools/perf/util/mem-events.c
+++ b/tools/perf/util/mem-events.c
@@ -301,6 +301,16 @@ static const char * const mem_lvlnum[] = {
 	[PERF_MEM_LVLNUM_NA] = "N/A",
 };
 
+static const char * const mem_hops[] = {
+	"N/A",
+	/*
+	 * While printing, 'Remote' will be added to represent
+	 * 'Remote core, same node' accesses as remote field need
+	 * to be set with mem_hops field.
+	 */
+	"core, same node",
+};
+
 int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 {
 	size_t i, l = 0;
@@ -325,6 +335,9 @@ int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 		l += 7;
 	}
 
+	if (mem_info && mem_info->data_src.mem_hops)
+		l += scnprintf(out + l, sz - l, "%s ", mem_hops[mem_info->data_src.mem_hops]);
+
 	printed = 0;
 	for (i = 0; m && i < ARRAY_SIZE(mem_lvl); i++, m >>= 1) {
 		if (!(m & 0x1))
@@ -471,8 +484,12 @@ int c2c_decode_stats(struct c2c_stats *stats, struct mem_info *mi)
 	/*
 	 * Skylake might report unknown remote level via this
 	 * bit, consider it when evaluating remote HITMs.
+	 *
+	 * Incase of power, remote field can also be used to denote cache
+	 * accesses from the another core of same node. Hence, setting
+	 * mrem only when HOPS is zero along with set remote field.
 	 */
-	bool mrem  = data_src->mem_remote;
+	bool mrem  = (data_src->mem_remote && !data_src->mem_hops);
 	int err = 0;
 
 #define HITM_INC(__f)		\
-- 
2.26.2

[PATCH v3 4/4] powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses

[Kajol Jain]

Fix the data source encodings to represent L2.1/L3.1(another core's
L2/L3 on the same node) accesses properly for power10 and older
plaforms.

Add new macros(LEVEL/REM) which can be used to add mem_lvl_num and remote
field data inside perf_mem_data_src structure.

Result in power9 system with patch changes:

localhost:~/linux/tools/perf # ./perf mem report | grep Remote
     0.01%             1  252           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff7f25eb90
anon               HitM          N/A                     No       N/A        0              0
     0.01%             1  220           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff77776d90
anon               HitM          N/A                     No       N/A        0              0
     0.01%             1  220           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff817d9410
anon               HitM          N/A                     No       N/A        0              0

Fixes: 79e96f8f930d ("powerpc/perf: Export memory hierarchy info to user
space")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 arch/powerpc/perf/isa207-common.c | 26 +++++++++++++++++++++-----
 arch/powerpc/perf/isa207-common.h |  2 ++
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index f92bf5f6b74f..7ea873ab2e6f 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -238,11 +238,27 @@ static inline u64 isa207_find_source(u64 idx, u32 sub_idx)
 		ret |= P(SNOOP, HIT);
 		break;
 	case 5:
-		ret = PH(LVL, REM_CCE1);
-		if ((sub_idx == 0) || (sub_idx == 2) || (sub_idx == 4))
-			ret |= P(SNOOP, HIT);
-		else if ((sub_idx == 1) || (sub_idx == 3) || (sub_idx == 5))
-			ret |= P(SNOOP, HITM);
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			ret = REM | P(HOPS, 0);
+
+			if (sub_idx == 0 || sub_idx == 4)
+				ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HIT);
+			else if (sub_idx == 1 || sub_idx == 5)
+				ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HITM);
+			else if (sub_idx == 2 || sub_idx == 6)
+				ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
+			else if (sub_idx == 3 || sub_idx == 7)
+				ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
+		} else {
+			if (sub_idx == 0)
+				ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HIT) | P(HOPS, 0);
+			else if (sub_idx == 1)
+				ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HITM) | P(HOPS, 0);
+			else if (sub_idx == 2 || sub_idx == 4)
+				ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HIT) | P(HOPS, 0);
+			else if (sub_idx == 3 || sub_idx == 5)
+				ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HITM) | P(HOPS, 0);
+		}
 		break;
 	case 6:
 		ret = PH(LVL, REM_CCE2);
diff --git a/arch/powerpc/perf/isa207-common.h b/arch/powerpc/perf/isa207-common.h
index 4a2cbc3dc047..ff122603989b 100644
--- a/arch/powerpc/perf/isa207-common.h
+++ b/arch/powerpc/perf/isa207-common.h
@@ -273,6 +273,8 @@
 #define P(a, b)				PERF_MEM_S(a, b)
 #define PH(a, b)			(P(LVL, HIT) | P(a, b))
 #define PM(a, b)			(P(LVL, MISS) | P(a, b))
+#define LEVEL(x)			P(LVLNUM, x)
+#define REM				P(REMOTE, REMOTE)
 
 int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp, u64 event_config1);
 int isa207_compute_mmcr(u64 event[], int n_ev,
-- 
2.26.2

[PATCH v3 4/4] powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses

[Kajol Jain]

Fix the data source encodings to represent L2.1/L3.1(another core's
L2/L3 on the same node) accesses properly for power10 and older
plaforms.

Add new macros(LEVEL/REM) which can be used to add mem_lvl_num and remote
field data inside perf_mem_data_src structure.

Result in power9 system with patch changes:

localhost:~/linux/tools/perf # ./perf mem report | grep Remote
     0.01%             1  252           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff7f25eb90
anon               HitM          N/A                     No       N/A        0              0
     0.01%             1  220           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff77776d90
anon               HitM          N/A                     No       N/A        0              0
     0.01%             1  220           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff817d9410
anon               HitM          N/A                     No       N/A        0              0

Fixes: 79e96f8f930d ("powerpc/perf: Export memory hierarchy info to user
space")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 arch/powerpc/perf/isa207-common.c | 26 +++++++++++++++++++++-----
 arch/powerpc/perf/isa207-common.h |  2 ++
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index f92bf5f6b74f..7ea873ab2e6f 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -238,11 +238,27 @@ static inline u64 isa207_find_source(u64 idx, u32 sub_idx)
 		ret |= P(SNOOP, HIT);
 		break;
 	case 5:
-		ret = PH(LVL, REM_CCE1);
-		if ((sub_idx == 0) || (sub_idx == 2) || (sub_idx == 4))
-			ret |= P(SNOOP, HIT);
-		else if ((sub_idx == 1) || (sub_idx == 3) || (sub_idx == 5))
-			ret |= P(SNOOP, HITM);
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			ret = REM | P(HOPS, 0);
+
+			if (sub_idx == 0 || sub_idx == 4)
+				ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HIT);
+			else if (sub_idx == 1 || sub_idx == 5)
+				ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HITM);
+			else if (sub_idx == 2 || sub_idx == 6)
+				ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
+			else if (sub_idx == 3 || sub_idx == 7)
+				ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
+		} else {
+			if (sub_idx == 0)
+				ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HIT) | P(HOPS, 0);
+			else if (sub_idx == 1)
+				ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HITM) | P(HOPS, 0);
+			else if (sub_idx == 2 || sub_idx == 4)
+				ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HIT) | P(HOPS, 0);
+			else if (sub_idx == 3 || sub_idx == 5)
+				ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HITM) | P(HOPS, 0);
+		}
 		break;
 	case 6:
 		ret = PH(LVL, REM_CCE2);
diff --git a/arch/powerpc/perf/isa207-common.h b/arch/powerpc/perf/isa207-common.h
index 4a2cbc3dc047..ff122603989b 100644
--- a/arch/powerpc/perf/isa207-common.h
+++ b/arch/powerpc/perf/isa207-common.h
@@ -273,6 +273,8 @@
 #define P(a, b)				PERF_MEM_S(a, b)
 #define PH(a, b)			(P(LVL, HIT) | P(a, b))
 #define PM(a, b)			(P(LVL, MISS) | P(a, b))
+#define LEVEL(x)			P(LVLNUM, x)
+#define REM				P(REMOTE, REMOTE)
 
 int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp, u64 event_config1);
 int isa207_compute_mmcr(u64 event[], int n_ev,
-- 
2.26.2

Re: [PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Peter Zijlstra]

On Wed, Oct 06, 2021 at 07:36:50PM +0530, Kajol Jain wrote:

> Kajol Jain (4):
>   perf: Add comment about current state of PERF_MEM_LVL_* namespace and
>     remove an extra line
>   perf: Add mem_hops field in perf_mem_data_src structure
>   tools/perf: Add mem_hops field in perf_mem_data_src structure
>   powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
> 
>  arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
>  arch/powerpc/perf/isa207-common.h     |  2 ++
>  include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
>  tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
>  tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
>  5 files changed, 73 insertions(+), 13 deletions(-)

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

How do we want this routed? Shall I take it, or does Michael want it in
the Power tree?

Re: [PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Peter Zijlstra]

On Wed, Oct 06, 2021 at 07:36:50PM +0530, Kajol Jain wrote:

> Kajol Jain (4):
>   perf: Add comment about current state of PERF_MEM_LVL_* namespace and
>     remove an extra line
>   perf: Add mem_hops field in perf_mem_data_src structure
>   tools/perf: Add mem_hops field in perf_mem_data_src structure
>   powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
> 
>  arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
>  arch/powerpc/perf/isa207-common.h     |  2 ++
>  include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
>  tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
>  tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
>  5 files changed, 73 insertions(+), 13 deletions(-)

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

How do we want this routed? Shall I take it, or does Michael want it in
the Power tree?

Re: [PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Michael Ellerman]

Peter Zijlstra <peterz@infradead.org> writes:
> On Wed, Oct 06, 2021 at 07:36:50PM +0530, Kajol Jain wrote:
>
>> Kajol Jain (4):
>>   perf: Add comment about current state of PERF_MEM_LVL_* namespace and
>>     remove an extra line
>>   perf: Add mem_hops field in perf_mem_data_src structure
>>   tools/perf: Add mem_hops field in perf_mem_data_src structure
>>   powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
>> 
>>  arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
>>  arch/powerpc/perf/isa207-common.h     |  2 ++
>>  include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
>>  tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
>>  tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
>>  5 files changed, 73 insertions(+), 13 deletions(-)
>
> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
>
> How do we want this routed? Shall I take it, or does Michael want it in
> the Power tree?

It's mostly non-powerpc, so I think you should take it.

There's a slim chance we could end up with a conflict in the powerpc
part, but that's no big deal.

cheers

Re: [PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Michael Ellerman]

Peter Zijlstra <peterz@infradead.org> writes:
> On Wed, Oct 06, 2021 at 07:36:50PM +0530, Kajol Jain wrote:
>
>> Kajol Jain (4):
>>   perf: Add comment about current state of PERF_MEM_LVL_* namespace and
>>     remove an extra line
>>   perf: Add mem_hops field in perf_mem_data_src structure
>>   tools/perf: Add mem_hops field in perf_mem_data_src structure
>>   powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
>> 
>>  arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
>>  arch/powerpc/perf/isa207-common.h     |  2 ++
>>  include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
>>  tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
>>  tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
>>  5 files changed, 73 insertions(+), 13 deletions(-)
>
> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
>
> How do we want this routed? Shall I take it, or does Michael want it in
> the Power tree?

It's mostly non-powerpc, so I think you should take it.

There's a slim chance we could end up with a conflict in the powerpc
part, but that's no big deal.

cheers

Re: [PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Peter Zijlstra]

On Mon, Oct 18, 2021 at 02:46:18PM +1100, Michael Ellerman wrote:
> Peter Zijlstra <peterz@infradead.org> writes:
> > On Wed, Oct 06, 2021 at 07:36:50PM +0530, Kajol Jain wrote:
> >
> >> Kajol Jain (4):
> >>   perf: Add comment about current state of PERF_MEM_LVL_* namespace and
> >>     remove an extra line
> >>   perf: Add mem_hops field in perf_mem_data_src structure
> >>   tools/perf: Add mem_hops field in perf_mem_data_src structure
> >>   powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
> >> 
> >>  arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
> >>  arch/powerpc/perf/isa207-common.h     |  2 ++
> >>  include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
> >>  tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
> >>  tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
> >>  5 files changed, 73 insertions(+), 13 deletions(-)
> >
> > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> >
> > How do we want this routed? Shall I take it, or does Michael want it in
> > the Power tree?
> 
> It's mostly non-powerpc, so I think you should take it.
> 
> There's a slim chance we could end up with a conflict in the powerpc
> part, but that's no big deal.

Sure thing, into perf/core it goes. Thanks!

Re: [PATCH v3 0/4] Add mem_hops field in perf_mem_data_src structure

[Peter Zijlstra]

On Mon, Oct 18, 2021 at 02:46:18PM +1100, Michael Ellerman wrote:
> Peter Zijlstra <peterz@infradead.org> writes:
> > On Wed, Oct 06, 2021 at 07:36:50PM +0530, Kajol Jain wrote:
> >
> >> Kajol Jain (4):
> >>   perf: Add comment about current state of PERF_MEM_LVL_* namespace and
> >>     remove an extra line
> >>   perf: Add mem_hops field in perf_mem_data_src structure
> >>   tools/perf: Add mem_hops field in perf_mem_data_src structure
> >>   powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
> >> 
> >>  arch/powerpc/perf/isa207-common.c     | 26 +++++++++++++++++++++-----
> >>  arch/powerpc/perf/isa207-common.h     |  2 ++
> >>  include/uapi/linux/perf_event.h       | 19 ++++++++++++++++---
> >>  tools/include/uapi/linux/perf_event.h | 19 ++++++++++++++++---
> >>  tools/perf/util/mem-events.c          | 20 ++++++++++++++++++--
> >>  5 files changed, 73 insertions(+), 13 deletions(-)
> >
> > Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> >
> > How do we want this routed? Shall I take it, or does Michael want it in
> > the Power tree?
> 
> It's mostly non-powerpc, so I think you should take it.
> 
> There's a slim chance we could end up with a conflict in the powerpc
> part, but that's no big deal.

Sure thing, into perf/core it goes. Thanks!

[tip: perf/core] powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses

[tip-bot2 for Kajol Jain]

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     26da4abfb38201c3cbe127daeded76d4c2bc9077
Gitweb:        https://git.kernel.org/tip/26da4abfb38201c3cbe127daeded76d4c2bc9077
Author:        Kajol Jain <kjain@linux.ibm.com>
AuthorDate:    Wed, 06 Oct 2021 19:36:54 +05:30
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Tue, 19 Oct 2021 17:27:01 +02:00

powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses

Fix the data source encodings to represent L2.1/L3.1(another core's
L2/L3 on the same node) accesses properly for power10 and older
plaforms.

Add new macros(LEVEL/REM) which can be used to add mem_lvl_num and remote
field data inside perf_mem_data_src structure.

Result in power9 system with patch changes:

localhost:~/linux/tools/perf # ./perf mem report | grep Remote
     0.01%             1  252           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff7f25eb90
anon               HitM          N/A                     No       N/A        0              0
     0.01%             1  220           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff77776d90
anon               HitM          N/A                     No       N/A        0              0
     0.01%             1  220           Remote core, same node L3 or L3 hit  [.] 0x0000000000002dd0                producer_consumer   [.] 0x00007fff817d9410
anon               HitM          N/A                     No       N/A        0              0

Fixes: 79e96f8f930d ("powerpc/perf: Export memory hierarchy info to user space")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-5-kjain@linux.ibm.com
---
 arch/powerpc/perf/isa207-common.c | 26 +++++++++++++++++++++-----
 arch/powerpc/perf/isa207-common.h |  2 ++
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index f92bf5f..7ea873a 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -238,11 +238,27 @@ static inline u64 isa207_find_source(u64 idx, u32 sub_idx)
 		ret |= P(SNOOP, HIT);
 		break;
 	case 5:
-		ret = PH(LVL, REM_CCE1);
-		if ((sub_idx == 0) || (sub_idx == 2) || (sub_idx == 4))
-			ret |= P(SNOOP, HIT);
-		else if ((sub_idx == 1) || (sub_idx == 3) || (sub_idx == 5))
-			ret |= P(SNOOP, HITM);
+		if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+			ret = REM | P(HOPS, 0);
+
+			if (sub_idx == 0 || sub_idx == 4)
+				ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HIT);
+			else if (sub_idx == 1 || sub_idx == 5)
+				ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HITM);
+			else if (sub_idx == 2 || sub_idx == 6)
+				ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
+			else if (sub_idx == 3 || sub_idx == 7)
+				ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
+		} else {
+			if (sub_idx == 0)
+				ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HIT) | P(HOPS, 0);
+			else if (sub_idx == 1)
+				ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HITM) | P(HOPS, 0);
+			else if (sub_idx == 2 || sub_idx == 4)
+				ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HIT) | P(HOPS, 0);
+			else if (sub_idx == 3 || sub_idx == 5)
+				ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HITM) | P(HOPS, 0);
+		}
 		break;
 	case 6:
 		ret = PH(LVL, REM_CCE2);
diff --git a/arch/powerpc/perf/isa207-common.h b/arch/powerpc/perf/isa207-common.h
index 4a2cbc3..ff12260 100644
--- a/arch/powerpc/perf/isa207-common.h
+++ b/arch/powerpc/perf/isa207-common.h
@@ -273,6 +273,8 @@
 #define P(a, b)				PERF_MEM_S(a, b)
 #define PH(a, b)			(P(LVL, HIT) | P(a, b))
 #define PM(a, b)			(P(LVL, MISS) | P(a, b))
+#define LEVEL(x)			P(LVLNUM, x)
+#define REM				P(REMOTE, REMOTE)
 
 int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp, u64 event_config1);
 int isa207_compute_mmcr(u64 event[], int n_ev,

[tip: perf/core] tools/perf: Add mem_hops field in perf_mem_data_src structure

[tip-bot2 for Kajol Jain]

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     cae1d759065ee989de246d4a72bc2bfe9ad9d262
Gitweb:        https://git.kernel.org/tip/cae1d759065ee989de246d4a72bc2bfe9ad9d262
Author:        Kajol Jain <kjain@linux.ibm.com>
AuthorDate:    Wed, 06 Oct 2021 19:36:53 +05:30
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Tue, 19 Oct 2021 17:27:00 +02:00

tools/perf: Add mem_hops field in perf_mem_data_src structure

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

Add functionality to represent mem_hop field data in
perf_mem__lvl_scnprintf function with the help of added string
array called mem_hops.

For ex: Encodings for mem_hops fields with L2 cache:

L2                      - local L2
L2 | REMOTE | HOPS_0    - remote core, same node L2

Since with the addition of HOPS field, now remote can be used to
denote cache access from the same node but different core, a check
is added in the c2c_decode_stats function to set mrem only when HOPS
is zero along with set remote field.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-4-kjain@linux.ibm.com
---
 tools/include/uapi/linux/perf_event.h | 11 +++++++++--
 tools/perf/util/mem-events.c          | 19 ++++++++++++++++++-
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index e1701e9..2fc0957 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -1210,14 +1210,16 @@ union perf_mem_data_src {
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_blk:3,	/* access blocked */
-			mem_rsvd:21;
+			mem_hops:3,	/* hop level */
+			mem_rsvd:18;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:21,
+		__u64	mem_rsvd:18,
+			mem_hops:3,	/* hop level */
 			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
@@ -1313,6 +1315,11 @@ union perf_mem_data_src {
 #define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
 #define PERF_MEM_BLK_SHIFT	40
 
+/* hop level */
+#define PERF_MEM_HOPS_0		0x01 /* remote core, same node */
+/* 2-7 available */
+#define PERF_MEM_HOPS_SHIFT	43
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 
diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c
index ff7289e..3167b46 100644
--- a/tools/perf/util/mem-events.c
+++ b/tools/perf/util/mem-events.c
@@ -301,6 +301,16 @@ static const char * const mem_lvlnum[] = {
 	[PERF_MEM_LVLNUM_NA] = "N/A",
 };
 
+static const char * const mem_hops[] = {
+	"N/A",
+	/*
+	 * While printing, 'Remote' will be added to represent
+	 * 'Remote core, same node' accesses as remote field need
+	 * to be set with mem_hops field.
+	 */
+	"core, same node",
+};
+
 int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 {
 	size_t i, l = 0;
@@ -325,6 +335,9 @@ int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 		l += 7;
 	}
 
+	if (mem_info && mem_info->data_src.mem_hops)
+		l += scnprintf(out + l, sz - l, "%s ", mem_hops[mem_info->data_src.mem_hops]);
+
 	printed = 0;
 	for (i = 0; m && i < ARRAY_SIZE(mem_lvl); i++, m >>= 1) {
 		if (!(m & 0x1))
@@ -471,8 +484,12 @@ int c2c_decode_stats(struct c2c_stats *stats, struct mem_info *mi)
 	/*
 	 * Skylake might report unknown remote level via this
 	 * bit, consider it when evaluating remote HITMs.
+	 *
+	 * Incase of power, remote field can also be used to denote cache
+	 * accesses from the another core of same node. Hence, setting
+	 * mrem only when HOPS is zero along with set remote field.
 	 */
-	bool mrem  = data_src->mem_remote;
+	bool mrem  = (data_src->mem_remote && !data_src->mem_hops);
 	int err = 0;
 
 #define HITM_INC(__f)		\

[tip: perf/core] perf: Add mem_hops field in perf_mem_data_src structure

[tip-bot2 for Kajol Jain]

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     fec9cc6175d0ec1e13efe12be491d9bd4de62f80
Gitweb:        https://git.kernel.org/tip/fec9cc6175d0ec1e13efe12be491d9bd4de62f80
Author:        Kajol Jain <kjain@linux.ibm.com>
AuthorDate:    Wed, 06 Oct 2021 19:36:52 +05:30
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Tue, 19 Oct 2021 17:27:00 +02:00

perf: Add mem_hops field in perf_mem_data_src structure

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

For ex: Encodings for mem_hops fields with L2 cache:

L2			- local L2
L2 | REMOTE | HOPS_0	- remote core, same node L2

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-3-kjain@linux.ibm.com
---
 include/uapi/linux/perf_event.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index a74538c..bd8860e 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1225,14 +1225,16 @@ union perf_mem_data_src {
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_blk:3,	/* access blocked */
-			mem_rsvd:21;
+			mem_hops:3,	/* hop level */
+			mem_rsvd:18;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:21,
+		__u64	mem_rsvd:18,
+			mem_hops:3,	/* hop level */
 			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
@@ -1328,6 +1330,11 @@ union perf_mem_data_src {
 #define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
 #define PERF_MEM_BLK_SHIFT	40
 
+/* hop level */
+#define PERF_MEM_HOPS_0		0x01 /* remote core, same node */
+/* 2-7 available */
+#define PERF_MEM_HOPS_SHIFT	43
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 

[tip: perf/core] perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line

[tip-bot2 for Kajol Jain]

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     f4c6217f7f5936f7173d028559ff5d25cce10816
Gitweb:        https://git.kernel.org/tip/f4c6217f7f5936f7173d028559ff5d25cce10816
Author:        Kajol Jain <kjain@linux.ibm.com>
AuthorDate:    Wed, 06 Oct 2021 19:36:51 +05:30
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Tue, 19 Oct 2021 17:27:00 +02:00

perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line

Add a comment about PERF_MEM_LVL_* namespace being depricated
to some extent in favour of added PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_}
fields.

Remove an extra line present in perf_mem__lvl_scnprintf function.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-2-kjain@linux.ibm.com
---
 include/uapi/linux/perf_event.h       | 8 +++++++-
 tools/include/uapi/linux/perf_event.h | 8 +++++++-
 tools/perf/util/mem-events.c          | 1 -
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index c89535d..a74538c 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1256,7 +1256,13 @@ union perf_mem_data_src {
 #define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
 #define PERF_MEM_OP_SHIFT	0
 
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
 #define PERF_MEM_LVL_NA		0x01  /* not available */
 #define PERF_MEM_LVL_HIT	0x02  /* hit level */
 #define PERF_MEM_LVL_MISS	0x04  /* miss level  */
diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h
index f92880a..e1701e9 100644
--- a/tools/include/uapi/linux/perf_event.h
+++ b/tools/include/uapi/linux/perf_event.h
@@ -1241,7 +1241,13 @@ union perf_mem_data_src {
 #define PERF_MEM_OP_EXEC	0x10 /* code (execution) */
 #define PERF_MEM_OP_SHIFT	0
 
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
 #define PERF_MEM_LVL_NA		0x01  /* not available */
 #define PERF_MEM_LVL_HIT	0x02  /* hit level */
 #define PERF_MEM_LVL_MISS	0x04  /* miss level  */
diff --git a/tools/perf/util/mem-events.c b/tools/perf/util/mem-events.c
index f0e75df..ff7289e 100644
--- a/tools/perf/util/mem-events.c
+++ b/tools/perf/util/mem-events.c
@@ -320,7 +320,6 @@ int perf_mem__lvl_scnprintf(char *out, size_t sz, struct mem_info *mem_info)
 	/* already taken care of */
 	m &= ~(PERF_MEM_LVL_HIT|PERF_MEM_LVL_MISS);
 
-
 	if (mem_info && mem_info->data_src.mem_remote) {
 		strcat(out, "Remote ");
 		l += 7;