Marcel Hamer writes: > In dwc3_send_gadget_ep_cmd() a check is performed if the gadget needs > waking up. The following condition is checked before calling the > __dwc3_gadget_wakeup() function: > > needs_wakeup = (dwc->link_state == DWC3_LINK_STATE_U1 || > dwc->link_state == DWC3_LINK_STATE_U2 || > dwc->link_state == DWC3_LINK_STATE_U3); > > Inside __dwc3_gadget_wakeup() only link_state DWC3_LINK_STATE_U3 is checked > and link state DWC3_LINK_STATE_U1 and DWC3_LINK_STATE_U2 are considered > invalid and generate a warning because of the call to: > > dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n", ret); > > because of ret being -EINVAL. > > Signed-off-by: Marcel Hamer > --- > drivers/usb/dwc3/gadget.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c > index c7ef218e7a8c..d05a7d630410 100644 > --- a/drivers/usb/dwc3/gadget.c > +++ b/drivers/usb/dwc3/gadget.c > @@ -1972,6 +1972,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) > switch (link_state) { > case DWC3_LINK_STATE_RESET: > case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ > + case DWC3_LINK_STATE_U1: > + case DWC3_LINK_STATE_U2: I think this was fixed recently by Thinh. https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c560e76319a94a3b9285bc426c609903408e4826 -- balbi