From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kuninori Morimoto Subject: [PATCH 075/127] ASoC: use component probe/remove on wm8990 Date: Tue, 9 Aug 2016 05:26:42 +0000 Message-ID: <87popia5ad.wl%kuninori.morimoto.gx@renesas.com> References: <87popieek9.wl%kuninori.morimoto.gx@renesas.com> Mime-Version: 1.0 (generated by SEMI-EPG 1.14.7 - "Harue") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from relmlie4.idc.renesas.com (relmlor1.renesas.com [210.160.252.171]) by alsa0.perex.cz (Postfix) with ESMTP id 55BD5267645 for ; Tue, 9 Aug 2016 07:26:47 +0200 (CEST) In-Reply-To: <87popieek9.wl%kuninori.morimoto.gx@renesas.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Mark Brown Cc: Linux-ALSA , Simon , Liam Girdwood List-Id: alsa-devel@alsa-project.org From: Kuninori Morimoto codec driver and component driver has duplicated .probe/.remove functions, and codec side is just relayed it. This was quick-hack, but no longer needed. This patch uses component .probe/.remove Signed-off-by: Kuninori Morimoto --- sound/soc/codecs/wm8990.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index a412fd0..6c649ba 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1272,8 +1272,10 @@ static struct snd_soc_dai_driver wm8990_dai = { * initialise the WM8990 driver * register the mixer and dsp interfaces with the kernel */ -static int wm8990_probe(struct snd_soc_codec *codec) +static int wm8990_probe(struct snd_soc_component *component) { + struct snd_soc_codec *codec = snd_soc_component_to_codec(component); + wm8990_reset(codec); /* charge output caps */ @@ -1295,11 +1297,11 @@ static int wm8990_probe(struct snd_soc_codec *codec) } static struct snd_soc_codec_driver soc_codec_dev_wm8990 = { - .probe = wm8990_probe, .set_bias_level = wm8990_set_bias_level, .suspend_bias_off = true, .component_driver = { + .probe = wm8990_probe, .controls = wm8990_snd_controls, .num_controls = ARRAY_SIZE(wm8990_snd_controls), .dapm_widgets = wm8990_dapm_widgets, -- 1.9.1