All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: Re: [RISU v2 15/17] Compute reginfo_size based on the reginfo
Date: Wed, 20 May 2020 18:30:19 +0100	[thread overview]
Message-ID: <87sgfufr9w.fsf@linaro.org> (raw)
In-Reply-To: <20200519025355.4420-16-richard.henderson@linaro.org>


Richard Henderson <richard.henderson@linaro.org> writes:

> This will allow dumping of SVE frames without having
> to know the SVE vector length beforehand.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
>  risu.h                 | 2 +-
>  reginfo.c              | 6 +++---
>  risu_reginfo_aarch64.c | 4 ++--
>  risu_reginfo_arm.c     | 2 +-
>  risu_reginfo_i386.c    | 2 +-
>  risu_reginfo_m68k.c    | 2 +-
>  risu_reginfo_ppc64.c   | 2 +-
>  7 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/risu.h b/risu.h
> index eeb6775..054cef7 100644
> --- a/risu.h
> +++ b/risu.h
> @@ -155,6 +155,6 @@ int reginfo_dump(struct reginfo *ri, FILE * f);
>  int reginfo_dump_mismatch(struct reginfo *m, struct reginfo *a, FILE *f);
>  
>  /* return size of reginfo */
> -const int reginfo_size(void);
> +int reginfo_size(struct reginfo *ri);
>  
>  #endif /* RISU_H */
> diff --git a/reginfo.c b/reginfo.c
> index f187d9c..411c2a6 100644
> --- a/reginfo.c
> +++ b/reginfo.c
> @@ -38,7 +38,7 @@ RisuResult send_register_info(void *uc)
>      case OP_TESTEND:
>      case OP_COMPARE:
>      case OP_SIGILL:
> -        header.size = reginfo_size();
> +        header.size = reginfo_size(&ri);
>          extra = &ri;
>          break;
>  
> @@ -109,7 +109,7 @@ RisuResult recv_and_compare_register_info(void *uc)
>      case OP_TESTEND:
>      case OP_COMPARE:
>      case OP_SIGILL:
> -        extra_size = reginfo_size();
> +        extra_size = reginfo_size(&master_ri);
>          break;
>      case OP_SETMEMBLOCK:
>      case OP_GETMEMBLOCK:
> @@ -217,7 +217,7 @@ void report_mismatch_header(void)
>          case OP_COMPARE:
>          case OP_SIGILL:
>              kind = "reginfo";
> -            a_sz = reginfo_size();
> +            a_sz = reginfo_size(&apprentice_ri);
>              break;
>          case OP_SETMEMBLOCK:
>          case OP_GETMEMBLOCK:
> diff --git a/risu_reginfo_aarch64.c b/risu_reginfo_aarch64.c
> index 028c690..7044648 100644
> --- a/risu_reginfo_aarch64.c
> +++ b/risu_reginfo_aarch64.c
> @@ -69,7 +69,7 @@ void process_arch_opt(int opt, const char *arg)
>  #endif
>  }
>  
> -const int reginfo_size(void)
> +int reginfo_size(struct reginfo *ri)
>  {
>      int size = offsetof(struct reginfo, simd.end);
>  #ifdef SVE_MAGIC
> @@ -194,7 +194,7 @@ void reginfo_init(struct reginfo *ri, ucontext_t *uc)
>  /* reginfo_is_eq: compare the reginfo structs, returns nonzero if equal */
>  int reginfo_is_eq(struct reginfo *r1, struct reginfo *r2)
>  {
> -    return memcmp(r1, r2, reginfo_size()) == 0;
> +    return memcmp(r1, r2, reginfo_size(r1)) == 0;
>  }
>  
>  #ifdef SVE_MAGIC
> diff --git a/risu_reginfo_arm.c b/risu_reginfo_arm.c
> index 3662f12..3832e27 100644
> --- a/risu_reginfo_arm.c
> +++ b/risu_reginfo_arm.c
> @@ -36,7 +36,7 @@ void process_arch_opt(int opt, const char *arg)
>      abort();
>  }
>  
> -const int reginfo_size(void)
> +int reginfo_size(struct reginfo *ri)
>  {
>      return sizeof(struct reginfo);

I wonder if the fixed size architectures should return (sizeof *ri) to
reinforce the point? Anyway:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

-- 
Alex Bennée


  reply	other threads:[~2020-05-20 17:33 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19  2:53 [RISU v2 00/17] risu cleanups and improvements Richard Henderson
2020-05-19  2:53 ` [RISU v2 01/17] Use bool for tracing variables Richard Henderson
2020-05-19 15:52   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 02/17] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2020-05-19 15:52   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 03/17] Hoist trace file opening Richard Henderson
2020-05-19 16:50   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 04/17] Adjust tracefile open for write Richard Henderson
2020-05-19 18:24   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 05/17] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2020-05-19 18:24   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 06/17] Make some risu.c symbols static Richard Henderson
2020-05-19 18:25   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 07/17] Add enum RisuOp Richard Henderson
2020-05-19 18:39   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 08/17] Add enum RisuResult Richard Henderson
2020-05-19 19:06   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 09/17] Unify i/o functions and use RisuResult Richard Henderson
2020-05-20 15:50   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 10/17] Pass non-OK result back through siglongjmp Richard Henderson
2020-05-20 15:52   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 11/17] Always write for --master Richard Henderson
2020-05-20 16:12   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 12/17] Simplify syncing with master Richard Henderson
2020-05-20 16:14   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 13/17] Split RES_MISMATCH for registers and memory Richard Henderson
2020-05-20 16:25   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 14/17] Add magic and size to the trace header Richard Henderson
2020-05-19 21:16   ` Richard Henderson
2020-05-20 16:59     ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 15/17] Compute reginfo_size based on the reginfo Richard Henderson
2020-05-20 17:30   ` Alex Bennée [this message]
2020-05-19  2:53 ` [RISU v2 16/17] aarch64: Reorg sve reginfo to save space Richard Henderson
2020-05-20 18:43   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 17/17] Add --dump option to inspect trace files Richard Henderson
2020-05-20 17:49   ` Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87sgfufr9w.fsf@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.