All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@codeaurora.org>
To: David Miller <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: pull-request: wireless-drivers-next 2019-08-19
Date: Mon, 19 Aug 2019 19:28:28 +0300	[thread overview]
Message-ID: <87tvad9l1v.fsf@kamboji.qca.qualcomm.com> (raw)

Hi Dave,

here's a pull request to net-next for v5.4, more info below. Please let
me know if there are any problems.

Kalle

The following changes since commit 3e3bb69589e482e0783f28d4cd1d8e56fda0bcbb:

  tc-testing: added tdc tests for [b|p]fifo qdisc (2019-07-23 14:08:15 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git tags/wireless-drivers-next-for-davem-2019-08-19

for you to fetch changes up to 6004cf298a4180199dc40bc40466126df8a5a88c:

  b43legacy: Remove pointless cond_resched() wrapper (2019-08-06 15:43:50 +0300)

----------------------------------------------------------------
wireless-drivers-next patches for 5.4

First set of patches for 5.4.

Major changes:

brcmfmac

* enable 160 MHz channel support

rt2x00

* add support for PLANEX GW-USMicroN USB device

rtw88

* add Bluetooth coexistance support

----------------------------------------------------------------
Arend van Spriel (10):
      brcmfmac: add 160MHz in chandef_to_chanspec()
      brcmfmac: enable DFS_OFFLOAD extended feature if supported
      brcmfmac: allow 160MHz in custom regulatory rules
      Revert "brcmfmac: fix NULL pointer derefence during USB disconnect"
      brcmfmac: change the order of things in brcmf_detach()
      brcmfmac: avoid firmware command in brcmf_netdev_open() when bus is down
      brcmfmac: clear events in brcmf_fweh_detach() will always fail
      brcmfmac: avoid firmware commands when bus is down
      brcmfmac: simply remove flowring if bus is down
      brcmfmac: remove unnecessary strlcpy() upon obtaining "ver" iovar

Brian Norris (2):
      rtw88: use txpwr_lmt_cfg_pair struct, not arrays
      Revert "mwifiex: fix system hang problem after resume"

Chris Chiu (1):
      rtl8xxxu: Fix wifi low signal strength issue of RTL8723BU

Chuhong Yuan (5):
      bcma: Use dev_get_drvdata
      iwlegacy: Use dev_get_drvdata where possible
      mwifiex: pcie: Use dev_get_drvdata
      qtnfmac_pcie: Use dev_get_drvdata
      rtlwifi: rtl_pci: Use dev_get_drvdata

Colin Ian King (3):
      libertas: remove redundant assignment to variable ret
      wl3501_cs: remove redundant variable rc
      ipw2x00: remove redundant assignment to err

Dan Williams (1):
      libertas: Fix a double free in if_spi_c2h_data()

Enrico Weigelt (1):
      rsi: return explicit error values

Ganapathi Kondraju (2):
      rsi: fix for sdio interface setup in 9116
      rsi: fix for sdio reset card issue

Greg Kroah-Hartman (1):
      rt2x00: no need to check return value of debugfs_create functions

Hariprasad Kelam (1):
      rtlwifi: btcoex: fix issue possible condition with no effect (if == else)

Jian-Hong Pan (2):
      rtw88: pci: Rearrange the memory usage for skb in RX ISR
      rtw88: pci: Use DMA sync instead of remapping in RX ISR

Joe Perches (1):
      rtw88: Fix misuse of GENMASK macro

Kevin Easton (1):
      libertas: Add missing sentinel at end of if_usb.c fw_table

Larry Finger (9):
      rtlwifi: rtl8188ee: Remove unused GET_XXX and SET_XXX descriptor macros
      rtlwifi: rtl88188ee: Replace local bit manipulation macros
      rtlwifi: rtl8188ee: Convert macros that set descriptor
      rtlwifi: rtl8188ee: Convert inline routines to little-endian words
      rtlwifi: rtl8188ee: Remove local configuration variable
      rtlwifi: rtl8192ce: Remove unused GET_XXX and SET_XXX
      rtlwifi: rtl8192ce: Replace local bit manipulation macros
      rtlwifi: rtl8192ce: Convert macros that set descriptor
      rtlwifi: rtl8192ce: Convert inline routines to little-endian words

Mao Wenan (1):
      mwifiex: use eth_broadcast_addr() to assign broadcast address

Masanari Iida (1):
      rt2800usb: Add new rt2800usb device PLANEX GW-USMicroN

Navid Emamdoost (1):
      mt7601u: null check the allocation

Pavel Machek (1):
      mwifiex: make error values consistent in mwifiex_update_bss_desc_with_ie()

Ping-Ke Shih (1):
      rtlwifi: remove assignment to itself

Rafał Miłecki (1):
      brcmfmac: don't net_ratelimit() CONSOLE messages on firmware crash

Soeren Moch (1):
      rt2x00usb: remove unnecessary rx flag checks

Stanislaw Gruszka (1):
      mt7601u: use params->ssn value directly

Thomas Gleixner (1):
      b43legacy: Remove pointless cond_resched() wrapper

Yan-Hsuan Chuang (3):
      rtw88: allow c2h operation in irq context
      rtw88: enclose c2h cmd handle with mutex
      rtw88: add BT co-existence support

YueHaibing (5):
      libertas_tf: Use correct channel range in lbtf_geo_init
      rtlwifi: remove unneeded function _rtl_dump_channel_map()
      brcmfmac: remove set but not used variable 'dtim_period'
      brcmsmac: remove three set but not used variables
      rtw88: pci: remove set but not used variable 'ip_sel'

Zong-Zhe Yang (1):
      rtw88: debug: dump tx power indexes in use

 drivers/bcma/host_pci.c                            |    6 +-
 drivers/net/wireless/broadcom/b43legacy/phy.c      |   21 +-
 .../wireless/broadcom/brcm80211/brcmfmac/bcdc.c    |   11 +-
 .../wireless/broadcom/brcm80211/brcmfmac/bcdc.h    |    6 +-
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |   61 +-
 .../wireless/broadcom/brcm80211/brcmfmac/common.c  |    1 -
 .../wireless/broadcom/brcm80211/brcmfmac/core.c    |   30 +-
 .../wireless/broadcom/brcm80211/brcmfmac/feature.c |    1 +
 .../wireless/broadcom/brcm80211/brcmfmac/feature.h |    4 +-
 .../wireless/broadcom/brcm80211/brcmfmac/fweh.c    |    9 -
 .../broadcom/brcm80211/brcmfmac/fwsignal.c         |   16 +-
 .../broadcom/brcm80211/brcmfmac/fwsignal.h         |    3 +-
 .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c  |    7 +
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    |    3 +-
 .../wireless/broadcom/brcm80211/brcmfmac/proto.c   |   10 +-
 .../wireless/broadcom/brcm80211/brcmfmac/proto.h   |    3 +-
 .../wireless/broadcom/brcm80211/brcmsmac/main.c    |   13 -
 drivers/net/wireless/intel/ipw2x00/ipw2100.c       |    2 +-
 drivers/net/wireless/intel/iwlegacy/common.c       |    3 +-
 drivers/net/wireless/marvell/libertas/if_spi.c     |   14 +-
 drivers/net/wireless/marvell/libertas/if_usb.c     |    3 +-
 drivers/net/wireless/marvell/libertas/main.c       |    2 +-
 drivers/net/wireless/marvell/libertas_tf/cmd.c     |    2 +-
 drivers/net/wireless/marvell/mwifiex/init.c        |    2 +-
 drivers/net/wireless/marvell/mwifiex/pcie.c        |    8 +-
 drivers/net/wireless/marvell/mwifiex/scan.c        |    2 +-
 drivers/net/wireless/marvell/mwifiex/tdls.c        |    3 +-
 drivers/net/wireless/mediatek/mt7601u/init.c       |    3 +
 drivers/net/wireless/mediatek/mt7601u/main.c       |    4 +-
 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c |    4 +-
 drivers/net/wireless/ralink/rt2x00/rt2800usb.c     |    1 +
 drivers/net/wireless/ralink/rt2x00/rt2x00debug.c   |  136 +-
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c     |    9 +-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c |   11 +-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  |    3 +-
 .../realtek/rtlwifi/btcoexist/halbtcoutsrc.c       |    8 +-
 drivers/net/wireless/realtek/rtlwifi/pci.c         |    6 +-
 drivers/net/wireless/realtek/rtlwifi/regd.c        |   18 -
 .../net/wireless/realtek/rtlwifi/rtl8188ee/dm.c    |    7 +-
 .../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c    |    4 -
 .../net/wireless/realtek/rtlwifi/rtl8188ee/trx.c   |  257 +-
 .../net/wireless/realtek/rtlwifi/rtl8188ee/trx.h   | 1046 ++++----
 .../net/wireless/realtek/rtlwifi/rtl8192ce/sw.c    |    2 -
 .../net/wireless/realtek/rtlwifi/rtl8192ce/trx.c   |  215 +-
 .../net/wireless/realtek/rtlwifi/rtl8192ce/trx.h   |  803 +++---
 .../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c    |    2 -
 .../net/wireless/realtek/rtlwifi/rtl8192se/sw.c    |    2 -
 .../net/wireless/realtek/rtlwifi/rtl8723ae/sw.c    |    4 -
 .../net/wireless/realtek/rtlwifi/rtl8723be/sw.c    |    4 -
 .../net/wireless/realtek/rtlwifi/rtl8821ae/sw.c    |    4 -
 drivers/net/wireless/realtek/rtw88/Makefile        |    1 +
 drivers/net/wireless/realtek/rtw88/coex.c          | 2507 +++++++++++++++++++
 drivers/net/wireless/realtek/rtw88/coex.h          |  369 +++
 drivers/net/wireless/realtek/rtw88/debug.c         |  112 +
 drivers/net/wireless/realtek/rtw88/fw.c            |  135 +-
 drivers/net/wireless/realtek/rtw88/fw.h            |   73 +
 drivers/net/wireless/realtek/rtw88/mac80211.c      |   19 +
 drivers/net/wireless/realtek/rtw88/main.c          |   45 +-
 drivers/net/wireless/realtek/rtw88/main.h          |  233 ++
 drivers/net/wireless/realtek/rtw88/pci.c           |   74 +-
 drivers/net/wireless/realtek/rtw88/phy.c           |   15 +-
 drivers/net/wireless/realtek/rtw88/phy.h           |    9 +
 drivers/net/wireless/realtek/rtw88/ps.c            |    9 +
 drivers/net/wireless/realtek/rtw88/reg.h           |   62 +
 drivers/net/wireless/realtek/rtw88/rtw8822b.c      |  462 +++-
 .../net/wireless/realtek/rtw88/rtw8822b_table.c    | 1564 +++++++++---
 drivers/net/wireless/realtek/rtw88/rtw8822c.c      |  355 ++-
 .../net/wireless/realtek/rtw88/rtw8822c_table.c    | 2635 +++++++++++++-------
 drivers/net/wireless/rsi/rsi_91x_sdio.c            |   31 +-
 drivers/net/wireless/wl3501_cs.c                   |    4 +-
 70 files changed, 8606 insertions(+), 2907 deletions(-)
 create mode 100644 drivers/net/wireless/realtek/rtw88/coex.c
 create mode 100644 drivers/net/wireless/realtek/rtw88/coex.h

             reply	other threads:[~2019-08-19 16:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-19 16:28 Kalle Valo [this message]
2019-08-20  1:34 ` pull-request: wireless-drivers-next 2019-08-19 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87tvad9l1v.fsf@kamboji.qca.qualcomm.com \
    --to=kvalo@codeaurora.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.