From mboxrd@z Thu Jan 1 00:00:00 1970 From: Helmut Klein Subject: Re: meson-gx-mmc: 2nd patch set Date: Sun, 19 Mar 2017 21:46:27 +0100 Message-ID: <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail-wm0-f49.google.com ([74.125.82.49]:35432 "EHLO mail-wm0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752298AbdCSUrc (ORCPT ); Sun, 19 Mar 2017 16:47:32 -0400 Received: by mail-wm0-f49.google.com with SMTP id u132so49994045wmg.0 for ; Sun, 19 Mar 2017 13:46:35 -0700 (PDT) In-Reply-To: <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Heiner Kallweit Cc: "linux-mmc@vger.kernel.org" , linux-amlogic@lists.infradead.org On 19.03.2017 16:35, Heiner Kallweit wrote: > Am 19.03.2017 um 12:23 schrieb Helmut Klein: >> On 18.03.2017 11:24, Heiner Kallweit wrote: >>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>> Hallo Heiner, >>>>>>>> >>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of course the older set v5 1...10). >>>>>>>> >>>>>>>> The performance of the sd-card and the mmc-chip of my minimx is much better now. >>>>>>>> >>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>> >>>>>>>> But: >>>>>>>> the wifi-adapter is no longer operational. The problem starts with patch 3 and gets worse with patch 5. >>>>>>>> >>>>>>>> the adapter (ap6330) is attached to the sdio port of the the s905. (=mmc1) >>>>>>>> >>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>> The board I test on supports block devices only. >>>>>>> >>>>>>> Could you please share few more details: >>>>>>> - Drivers involved >>>>>>> - All syslog messages related to the device / driver >>>>>>> >>>>>>> And please set the relevant mailing lists on cc when providing test feedback. >>>>>>> Others might find your feedback helpful too. >>>>>>> >>>>>>> Thanks, Heiner >>>>>>> >>>>>>>> so i think it is important to test your patch set asap on an officially supported board with a wifi adapter). >>>>>>>> >>>>>>>> regards >>>>>>>> Helmut >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as a module and loaded via /etc/modules. >>>>>> the driver depends on the modules brcmutil and cfg80211, which are auto loaded. >>>>>> >>>>>> my user space is debian unstable. The kernel is cross compiled on my x86-64 laptop with gcc 5.4.1 >>>>>> >>>>>> i use my own kernel configuration without an initial ramdisk. mmc, usb & ext4 drivers are compiled into the kernel >>>>>> >>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>> >>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card reader). >>>>>> >>>>>> >>>>>> here is the filtered (mmc|brcmfmac) syslog output when only patches 1 & 2 are applied >>>>>> >>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 >>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 184 >>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 188 >>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 192 >>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 196 >>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 200 >>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 204 >>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 208 >>>>>> >>>>>> this is the output after adding patch 3 >>>>>> >>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed <<<===== >>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error -84 on writing 239507 membytes at 0x00000000 >>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed >>>>>> >>>>>> and this is the output after adding patches 4 & 5 >>>>>> >>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 KiB <<<===== >>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not supported <<<===== >>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >>>>>> >>>>>> regards >>>>>> Helmut >>>>>> >>>>> >>>>> Thanks a lot for the additional information. The first version of the patch >>>>> set broke byte mode obviously (block mode is working fine). >>>>> >>>>> Before submitting a new version of the patch set: >>>>> Could you please apply patches 1, 2, and 4 of the patch set plus the >>>>> following one and re-test? >>>>> >>>>> Thanks, Heiner >>>>> >>>>> --- >>>>> drivers/mmc/host/meson-gx-mmc.c | 222 ++++++++++++++++++++++------------------ >>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>> >>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>>>> index 6bfd3da9..ca685902 100644 >>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>> @@ -121,6 +121,13 @@ >>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>> >>>>> +struct sd_emmc_desc { >>>>> + u32 cmd_cfg; >>>>> + u32 cmd_arg; >>>>> + u32 cmd_data; >>>>> + u32 cmd_resp; >>>>> +}; >>>>> + >>>>> struct meson_host { >>>>> struct device *dev; >>>>> struct mmc_host *mmc; >>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>> struct clk_divider cfg_div; >>>>> struct clk *cfg_div_clk; >>>>> >>>>> - unsigned int bounce_buf_size; >>>>> - void *bounce_buf; >>>>> - dma_addr_t bounce_dma_addr; >>>>> + struct sd_emmc_desc *descs; >>>>> + dma_addr_t descs_dma_addr; >>>>> >>>>> bool vqmmc_enabled; >>>>> }; >>>>> >>>>> -struct sd_emmc_desc { >>>>> - u32 cmd_cfg; >>>>> - u32 cmd_arg; >>>>> - u32 cmd_data; >>>>> - u32 cmd_resp; >>>>> -}; >>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>> @@ -185,6 +185,36 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>> return NULL; >>>>> } >>>>> >>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) >>>>> +{ >>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; >>>>> +} >>>>> + >>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) >>>>> +{ >>>>> + struct mmc_data *data = mrq->data; >>>>> + >>>>> + if (!data) >>>>> + return; >>>>> + >>>>> + data->host_cookie = true; >>>>> + >>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>> + meson_mmc_get_data_dir(data)); >>>>> + if (!data->sg_count) >>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>> +} >>>>> + >>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, >>>>> + int err) >>>>> +{ >>>>> + struct mmc_data *data = mrq->data; >>>>> + >>>>> + if (data && data->sg_count) >>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>> + meson_mmc_get_data_dir(data)); >>>>> +} >>>>> + >>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) >>>>> { >>>>> struct mmc_host *mmc = host->mmc; >>>>> @@ -434,104 +464,102 @@ static void meson_mmc_request_done(struct mmc_host *mmc, >>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >>>>> { >>>>> struct meson_host *host = mmc_priv(mmc); >>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>> - u32 cfg; >>>>> - u8 blk_len, cmd_cfg_timeout; >>>>> - unsigned int xfer_bytes = 0; >>>>> + struct sd_emmc_desc *desc = host->descs; >>>>> + struct mmc_data *data = cmd->data; >>>>> + struct scatterlist *sg; >>>>> + u32 cfg, cmd_cfg = 0; >>>>> + u8 blk_len; >>>>> + int i; >>>>> >>>>> - /* Setup descriptors */ >>>>> dma_rmb(); >>>>> - desc = &desc_tmp; >>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>> >>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>> - desc->cmd_arg = cmd->arg; >>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>> >>>>> /* Response */ >>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>> if (cmd->flags & MMC_RSP_136) >>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>> - desc->cmd_resp = 0; >>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>> >>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>> >>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>> } else { >>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>> } >>>>> >>>>> - /* data? */ >>>>> - if (cmd->data) { >>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>> - if (cmd->data->blocks > 1) { >>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>> - desc->cmd_cfg |= >>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>> - CMD_CFG_LENGTH_SHIFT; >>>>> + if (data) { >>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>> + >>>>> + if (data->blocks > 1) { >>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>> >>>>> /* check if block-size matches, if not update */ >>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", >>>>> - __func__, blk_len, >>>>> - ilog2(cmd->data->blksz)); >>>>> - blk_len = ilog2(cmd->data->blksz); >>>>> + if (blk_len != ilog2(data->blksz)) { >>>>> + dev_dbg(host->dev, >>>>> + "%s: update blk_len %d -> %d\n", >>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>> + blk_len = ilog2(data->blksz); >>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>> } >>>>> - } else { >>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>> - desc->cmd_cfg |= >>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>> - CMD_CFG_LENGTH_SHIFT; >>>>> } >>>>> >>>>> - cmd->data->bytes_xfered = 0; >>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>> - host->bounce_buf, xfer_bytes); >>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>> - dma_wmb(); >>>>> - } else { >>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>> - } >>>>> + data->bytes_xfered = 0; >>>>> + if (data->flags & MMC_DATA_WRITE) >>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>> >>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>> + >>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>> + unsigned int len = sg_dma_len(sg); >>>>> + >>>>> + if (data->blocks > 1) >>>>> + len /= data->blksz; >>>>> + >>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>> + CMD_CFG_LENGTH_SHIFT; >>>>> + if (i > 0) >>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>> + desc[i].cmd_arg = cmd->arg; >>>>> + desc[i].cmd_resp = 0; >>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>> + } >>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>> >>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>> } else { >>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << CMD_CFG_TIMEOUT_SHIFT; >>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>> + desc[0].cmd_arg = cmd->arg; >>>>> + desc[0].cmd_resp = 0; >>>>> + desc[0].cmd_data = 0; >>>>> } >>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>> >>>>> host->cmd = cmd; >>>>> >>>>> - /* Last descriptor */ >>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>> } >>>>> >>>>> static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>> { >>>>> struct meson_host *host = mmc_priv(mmc); >>>>> + bool needs_pre_post_req = mrq->data && !mrq->data->host_cookie; >>>>> + >>>>> + if (needs_pre_post_req) >>>>> + meson_mmc_pre_req(mmc, mrq); >>>>> >>>>> /* Stop execution */ >>>>> writel(0, host->regs + SD_EMMC_START); >>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>> else >>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>> + >>>>> + if (needs_pre_post_req) >>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>> } >>>>> >>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) >>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>> { >>>>> struct meson_host *host = dev_id; >>>>> struct mmc_command *cmd; >>>>> + struct mmc_data *data; >>>>> u32 irq_en, status, raw_status; >>>>> irqreturn_t ret = IRQ_HANDLED; >>>>> >>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>> if (WARN_ON(!cmd)) >>>>> return IRQ_NONE; >>>>> >>>>> + data = cmd->data; >>>>> + >>>>> spin_lock(&host->lock); >>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>> cmd->error = -ETIMEDOUT; >>>>> } >>>>> + >>>>> + if (data && !cmd->error) >>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>> + >>>>> if (status & IRQ_SDIO) >>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>> >>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>> - ret = IRQ_WAKE_THREAD; >>>>> - else { >>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>> + if (meson_mmc_get_next_command(cmd)) >>>>> + ret = IRQ_WAKE_THREAD; >>>>> + } else { >>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>> status, cmd->opcode, cmd->arg, >>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>> @@ -642,26 +681,12 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) >>>>> { >>>>> struct meson_host *host = dev_id; >>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>> - struct mmc_data *data; >>>>> - unsigned int xfer_bytes; >>>>> >>>>> if (WARN_ON(!cmd)) >>>>> return IRQ_NONE; >>>>> >>>>> - data = cmd->data; >>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>> - xfer_bytes = data->blksz * data->blocks; >>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>> - host->bounce_buf, xfer_bytes); >>>>> - data->bytes_xfered = xfer_bytes; >>>>> - } >>>>> - >>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>> - if (next_cmd) >>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>> - else >>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>> >>>>> return IRQ_HANDLED; >>>>> } >>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops meson_mmc_ops = { >>>>> .request = meson_mmc_request, >>>>> .set_ios = meson_mmc_set_ios, >>>>> .get_cd = meson_mmc_get_cd, >>>>> + .pre_req = meson_mmc_pre_req, >>>>> + .post_req = meson_mmc_post_req, >>>>> }; >>>>> >>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct platform_device *pdev) >>>>> >>>>> mmc->caps |= MMC_CAP_CMD23; >>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>> - >>>>> - /* data bounce buffer */ >>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>> - host->bounce_buf = >>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>> - if (host->bounce_buf == NULL) { >>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); >>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>> + >>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>> + if (!host->descs) { >>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer failed\n"); >>>>> ret = -ENOMEM; >>>>> goto err_div_clk; >>>>> } >>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct platform_device *pdev) >>>>> /* disable interrupts */ >>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>> >>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>> + host->descs_dma_addr); >>>>> >>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>> clk_disable_unprepare(host->core_clk); >>>>> >>>> >>>> compared to the patches 1...5 there is absolutely no change to patches 1, 2, 4 and the above. Neither syslog nor performance. >>>> >>> Thanks for re-testing. I have a little bit of a hard time to understand why SD and eMMC mode >>> are working but SDIO (at least with brcfmac) is not. Especially as I don't have HW to test SDIO mode on. >>> >>> After patches 1, 2, 4 the system is still working normally? >>> And would it be possible for you to compile a DEBUG kernel and post the mmc/brcmfmac related output? >>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>> >>> Last but not least, could you please post /proc/interrupts ? This would give an idea whether any SDIO >>> or just specific ones fail. >>> >>> Thanks, Heiner >>> >>>> regards >>>> Helmut >>>> >>> >>> >> >> i enabled the debug flags for mmc and brcmfmac in the kernel configuration. >> For the test i also changed meson-gx-mmc from built-in to module. >> This resulted in a different order of the mmc devices. The sdio/wifi is now mmc0 and not mmc1 >> >> Without your new patch the wifi adapter works normally. >> >> The debug info was produced with following commad sequence >> dmesg -n 8 >> dmesg -D >> logger "loading meson-gx-mmc...." >> modprobe meson-gx-mmc >> sleep 1 >> logger "loading brcmfmac" >> modprobe brcmfmac >> logger "modules loaded" >> sleep 1 >> cp /var/log/syslog ~/syslog >> cp /proc/interrupts ~/interrupts >> >> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >> >> because of the length of the files i removed most lines of the loading of meson-gx-mmc >> >> unhandled interrupts: independent of the number of applied patches i've always got 11 of them. >> Only the timings differed with the applied patches >> >> the is the log for applied patches 1, 2, 4 & the new one >> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >> loading brcmfmac >> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data available. >> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 48.731881] mmc0: 4 bytes transferred: 0 >> [ 48.731887] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<<<===== wrong! >> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x21 >> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 00000000 00000000 >> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, data:0x00 >> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000f, nbytes=1 >> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 48.732235] mmc0: 4 bytes transferred: 0 >> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 >> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not supported >> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >> [ 48.732273] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering oob=0 sd=0 >> [ 48.732290] brcmfmac: brcmf_detach Enter >> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >> >> this is the debug data for applied patches 1,2 & 4 (left only few lines after the first CMD53) >> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >> loading brcmfmac >> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data available. >> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 53.796829] mmc0: 4 bytes transferred: 0 >> [ 53.796836] brcmfmac: brcmf_sdiod_regrl data:0x16044330 <<<<<====== ok >> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> >> if you need more data: just ask ;-) >> > Thanks a lot for the logs. So the first read returns 0 instead of the actual register value. > Could you please apply the following on top of 1, 2, 4, new one and send the log? > I hope the two debug messages bring me closer to the root cause of the issue. > > Rgds, Heiner > > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 3b3ddf3e..d6d2d1a1 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > for_each_sg(data->sg, sg, data->sg_count, i) { > unsigned int len = sg_dma_len(sg); > > + if (cmd->opcode == 53) > + dev_info(host->info, "cmd 53: idx %d len %u\n", i, len); > + > if (data->blocks > 1) > len /= data->blksz; > > @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) > > meson_mmc_read_resp(host->mmc, cmd); > > + if (cmd->opcode == 53) > + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", host->descs[0].cmd_data); > + > cmd->error = 0; > if (status & IRQ_RXD_ERR_MASK) { > dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); > here is the output: [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 [ 107.510541] mmc0: 4 bytes transferred: 0 [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 Helmut From mboxrd@z Thu Jan 1 00:00:00 1970 From: hgkr.klein@gmail.com (Helmut Klein) Date: Sun, 19 Mar 2017 21:46:27 +0100 Subject: meson-gx-mmc: 2nd patch set In-Reply-To: <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> Message-ID: <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On 19.03.2017 16:35, Heiner Kallweit wrote: > Am 19.03.2017 um 12:23 schrieb Helmut Klein: >> On 18.03.2017 11:24, Heiner Kallweit wrote: >>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>> Hallo Heiner, >>>>>>>> >>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of course the older set v5 1...10). >>>>>>>> >>>>>>>> The performance of the sd-card and the mmc-chip of my minimx is much better now. >>>>>>>> >>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>> >>>>>>>> But: >>>>>>>> the wifi-adapter is no longer operational. The problem starts with patch 3 and gets worse with patch 5. >>>>>>>> >>>>>>>> the adapter (ap6330) is attached to the sdio port of the the s905. (=mmc1) >>>>>>>> >>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>> The board I test on supports block devices only. >>>>>>> >>>>>>> Could you please share few more details: >>>>>>> - Drivers involved >>>>>>> - All syslog messages related to the device / driver >>>>>>> >>>>>>> And please set the relevant mailing lists on cc when providing test feedback. >>>>>>> Others might find your feedback helpful too. >>>>>>> >>>>>>> Thanks, Heiner >>>>>>> >>>>>>>> so i think it is important to test your patch set asap on an officially supported board with a wifi adapter). >>>>>>>> >>>>>>>> regards >>>>>>>> Helmut >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as a module and loaded via /etc/modules. >>>>>> the driver depends on the modules brcmutil and cfg80211, which are auto loaded. >>>>>> >>>>>> my user space is debian unstable. The kernel is cross compiled on my x86-64 laptop with gcc 5.4.1 >>>>>> >>>>>> i use my own kernel configuration without an initial ramdisk. mmc, usb & ext4 drivers are compiled into the kernel >>>>>> >>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>> >>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card reader). >>>>>> >>>>>> >>>>>> here is the filtered (mmc|brcmfmac) syslog output when only patches 1 & 2 are applied >>>>>> >>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 >>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 184 >>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 188 >>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 192 >>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 196 >>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 200 >>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 204 >>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 208 >>>>>> >>>>>> this is the output after adding patch 3 >>>>>> >>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed <<<===== >>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error -84 on writing 239507 membytes at 0x00000000 >>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed >>>>>> >>>>>> and this is the output after adding patches 4 & 5 >>>>>> >>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 KiB <<<===== >>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not supported <<<===== >>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >>>>>> >>>>>> regards >>>>>> Helmut >>>>>> >>>>> >>>>> Thanks a lot for the additional information. The first version of the patch >>>>> set broke byte mode obviously (block mode is working fine). >>>>> >>>>> Before submitting a new version of the patch set: >>>>> Could you please apply patches 1, 2, and 4 of the patch set plus the >>>>> following one and re-test? >>>>> >>>>> Thanks, Heiner >>>>> >>>>> --- >>>>> drivers/mmc/host/meson-gx-mmc.c | 222 ++++++++++++++++++++++------------------ >>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>> >>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>>>> index 6bfd3da9..ca685902 100644 >>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>> @@ -121,6 +121,13 @@ >>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>> >>>>> +struct sd_emmc_desc { >>>>> + u32 cmd_cfg; >>>>> + u32 cmd_arg; >>>>> + u32 cmd_data; >>>>> + u32 cmd_resp; >>>>> +}; >>>>> + >>>>> struct meson_host { >>>>> struct device *dev; >>>>> struct mmc_host *mmc; >>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>> struct clk_divider cfg_div; >>>>> struct clk *cfg_div_clk; >>>>> >>>>> - unsigned int bounce_buf_size; >>>>> - void *bounce_buf; >>>>> - dma_addr_t bounce_dma_addr; >>>>> + struct sd_emmc_desc *descs; >>>>> + dma_addr_t descs_dma_addr; >>>>> >>>>> bool vqmmc_enabled; >>>>> }; >>>>> >>>>> -struct sd_emmc_desc { >>>>> - u32 cmd_cfg; >>>>> - u32 cmd_arg; >>>>> - u32 cmd_data; >>>>> - u32 cmd_resp; >>>>> -}; >>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>> @@ -185,6 +185,36 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>> return NULL; >>>>> } >>>>> >>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) >>>>> +{ >>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; >>>>> +} >>>>> + >>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) >>>>> +{ >>>>> + struct mmc_data *data = mrq->data; >>>>> + >>>>> + if (!data) >>>>> + return; >>>>> + >>>>> + data->host_cookie = true; >>>>> + >>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>> + meson_mmc_get_data_dir(data)); >>>>> + if (!data->sg_count) >>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>> +} >>>>> + >>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, >>>>> + int err) >>>>> +{ >>>>> + struct mmc_data *data = mrq->data; >>>>> + >>>>> + if (data && data->sg_count) >>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>> + meson_mmc_get_data_dir(data)); >>>>> +} >>>>> + >>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) >>>>> { >>>>> struct mmc_host *mmc = host->mmc; >>>>> @@ -434,104 +464,102 @@ static void meson_mmc_request_done(struct mmc_host *mmc, >>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >>>>> { >>>>> struct meson_host *host = mmc_priv(mmc); >>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>> - u32 cfg; >>>>> - u8 blk_len, cmd_cfg_timeout; >>>>> - unsigned int xfer_bytes = 0; >>>>> + struct sd_emmc_desc *desc = host->descs; >>>>> + struct mmc_data *data = cmd->data; >>>>> + struct scatterlist *sg; >>>>> + u32 cfg, cmd_cfg = 0; >>>>> + u8 blk_len; >>>>> + int i; >>>>> >>>>> - /* Setup descriptors */ >>>>> dma_rmb(); >>>>> - desc = &desc_tmp; >>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>> >>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>> - desc->cmd_arg = cmd->arg; >>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>> >>>>> /* Response */ >>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>> if (cmd->flags & MMC_RSP_136) >>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>> - desc->cmd_resp = 0; >>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>> >>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>> >>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>> } else { >>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>> } >>>>> >>>>> - /* data? */ >>>>> - if (cmd->data) { >>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>> - if (cmd->data->blocks > 1) { >>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>> - desc->cmd_cfg |= >>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>> - CMD_CFG_LENGTH_SHIFT; >>>>> + if (data) { >>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>> + >>>>> + if (data->blocks > 1) { >>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>> >>>>> /* check if block-size matches, if not update */ >>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", >>>>> - __func__, blk_len, >>>>> - ilog2(cmd->data->blksz)); >>>>> - blk_len = ilog2(cmd->data->blksz); >>>>> + if (blk_len != ilog2(data->blksz)) { >>>>> + dev_dbg(host->dev, >>>>> + "%s: update blk_len %d -> %d\n", >>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>> + blk_len = ilog2(data->blksz); >>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>> } >>>>> - } else { >>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>> - desc->cmd_cfg |= >>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>> - CMD_CFG_LENGTH_SHIFT; >>>>> } >>>>> >>>>> - cmd->data->bytes_xfered = 0; >>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>> - host->bounce_buf, xfer_bytes); >>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>> - dma_wmb(); >>>>> - } else { >>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>> - } >>>>> + data->bytes_xfered = 0; >>>>> + if (data->flags & MMC_DATA_WRITE) >>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>> >>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>> + >>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>> + unsigned int len = sg_dma_len(sg); >>>>> + >>>>> + if (data->blocks > 1) >>>>> + len /= data->blksz; >>>>> + >>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>> + CMD_CFG_LENGTH_SHIFT; >>>>> + if (i > 0) >>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>> + desc[i].cmd_arg = cmd->arg; >>>>> + desc[i].cmd_resp = 0; >>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>> + } >>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>> >>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>> } else { >>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << CMD_CFG_TIMEOUT_SHIFT; >>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>> + desc[0].cmd_arg = cmd->arg; >>>>> + desc[0].cmd_resp = 0; >>>>> + desc[0].cmd_data = 0; >>>>> } >>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>> >>>>> host->cmd = cmd; >>>>> >>>>> - /* Last descriptor */ >>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>> } >>>>> >>>>> static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>> { >>>>> struct meson_host *host = mmc_priv(mmc); >>>>> + bool needs_pre_post_req = mrq->data && !mrq->data->host_cookie; >>>>> + >>>>> + if (needs_pre_post_req) >>>>> + meson_mmc_pre_req(mmc, mrq); >>>>> >>>>> /* Stop execution */ >>>>> writel(0, host->regs + SD_EMMC_START); >>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>> else >>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>> + >>>>> + if (needs_pre_post_req) >>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>> } >>>>> >>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) >>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>> { >>>>> struct meson_host *host = dev_id; >>>>> struct mmc_command *cmd; >>>>> + struct mmc_data *data; >>>>> u32 irq_en, status, raw_status; >>>>> irqreturn_t ret = IRQ_HANDLED; >>>>> >>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>> if (WARN_ON(!cmd)) >>>>> return IRQ_NONE; >>>>> >>>>> + data = cmd->data; >>>>> + >>>>> spin_lock(&host->lock); >>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>> cmd->error = -ETIMEDOUT; >>>>> } >>>>> + >>>>> + if (data && !cmd->error) >>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>> + >>>>> if (status & IRQ_SDIO) >>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>> >>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>> - ret = IRQ_WAKE_THREAD; >>>>> - else { >>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>> + if (meson_mmc_get_next_command(cmd)) >>>>> + ret = IRQ_WAKE_THREAD; >>>>> + } else { >>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>> status, cmd->opcode, cmd->arg, >>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>> @@ -642,26 +681,12 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) >>>>> { >>>>> struct meson_host *host = dev_id; >>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>> - struct mmc_data *data; >>>>> - unsigned int xfer_bytes; >>>>> >>>>> if (WARN_ON(!cmd)) >>>>> return IRQ_NONE; >>>>> >>>>> - data = cmd->data; >>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>> - xfer_bytes = data->blksz * data->blocks; >>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>> - host->bounce_buf, xfer_bytes); >>>>> - data->bytes_xfered = xfer_bytes; >>>>> - } >>>>> - >>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>> - if (next_cmd) >>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>> - else >>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>> >>>>> return IRQ_HANDLED; >>>>> } >>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops meson_mmc_ops = { >>>>> .request = meson_mmc_request, >>>>> .set_ios = meson_mmc_set_ios, >>>>> .get_cd = meson_mmc_get_cd, >>>>> + .pre_req = meson_mmc_pre_req, >>>>> + .post_req = meson_mmc_post_req, >>>>> }; >>>>> >>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct platform_device *pdev) >>>>> >>>>> mmc->caps |= MMC_CAP_CMD23; >>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>> - >>>>> - /* data bounce buffer */ >>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>> - host->bounce_buf = >>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>> - if (host->bounce_buf == NULL) { >>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); >>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>> + >>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>> + if (!host->descs) { >>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer failed\n"); >>>>> ret = -ENOMEM; >>>>> goto err_div_clk; >>>>> } >>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct platform_device *pdev) >>>>> /* disable interrupts */ >>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>> >>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>> + host->descs_dma_addr); >>>>> >>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>> clk_disable_unprepare(host->core_clk); >>>>> >>>> >>>> compared to the patches 1...5 there is absolutely no change to patches 1, 2, 4 and the above. Neither syslog nor performance. >>>> >>> Thanks for re-testing. I have a little bit of a hard time to understand why SD and eMMC mode >>> are working but SDIO (at least with brcfmac) is not. Especially as I don't have HW to test SDIO mode on. >>> >>> After patches 1, 2, 4 the system is still working normally? >>> And would it be possible for you to compile a DEBUG kernel and post the mmc/brcmfmac related output? >>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>> >>> Last but not least, could you please post /proc/interrupts ? This would give an idea whether any SDIO >>> or just specific ones fail. >>> >>> Thanks, Heiner >>> >>>> regards >>>> Helmut >>>> >>> >>> >> >> i enabled the debug flags for mmc and brcmfmac in the kernel configuration. >> For the test i also changed meson-gx-mmc from built-in to module. >> This resulted in a different order of the mmc devices. The sdio/wifi is now mmc0 and not mmc1 >> >> Without your new patch the wifi adapter works normally. >> >> The debug info was produced with following commad sequence >> dmesg -n 8 >> dmesg -D >> logger "loading meson-gx-mmc...." >> modprobe meson-gx-mmc >> sleep 1 >> logger "loading brcmfmac" >> modprobe brcmfmac >> logger "modules loaded" >> sleep 1 >> cp /var/log/syslog ~/syslog >> cp /proc/interrupts ~/interrupts >> >> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >> >> because of the length of the files i removed most lines of the loading of meson-gx-mmc >> >> unhandled interrupts: independent of the number of applied patches i've always got 11 of them. >> Only the timings differed with the applied patches >> >> the is the log for applied patches 1, 2, 4 & the new one >> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >> loading brcmfmac >> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data available. >> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 48.731881] mmc0: 4 bytes transferred: 0 >> [ 48.731887] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<<<===== wrong! >> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x21 >> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 00000000 00000000 >> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, data:0x00 >> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000f, nbytes=1 >> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 48.732235] mmc0: 4 bytes transferred: 0 >> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 >> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not supported >> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >> [ 48.732273] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering oob=0 sd=0 >> [ 48.732290] brcmfmac: brcmf_detach Enter >> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >> >> this is the debug data for applied patches 1,2 & 4 (left only few lines after the first CMD53) >> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >> loading brcmfmac >> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data available. >> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 53.796829] mmc0: 4 bytes transferred: 0 >> [ 53.796836] brcmfmac: brcmf_sdiod_regrl data:0x16044330 <<<<<====== ok >> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >> >> if you need more data: just ask ;-) >> > Thanks a lot for the logs. So the first read returns 0 instead of the actual register value. > Could you please apply the following on top of 1, 2, 4, new one and send the log? > I hope the two debug messages bring me closer to the root cause of the issue. > > Rgds, Heiner > > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 3b3ddf3e..d6d2d1a1 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > for_each_sg(data->sg, sg, data->sg_count, i) { > unsigned int len = sg_dma_len(sg); > > + if (cmd->opcode == 53) > + dev_info(host->info, "cmd 53: idx %d len %u\n", i, len); > + > if (data->blocks > 1) > len /= data->blksz; > > @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) > > meson_mmc_read_resp(host->mmc, cmd); > > + if (cmd->opcode == 53) > + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", host->descs[0].cmd_data); > + > cmd->error = 0; > if (status & IRQ_RXD_ERR_MASK) { > dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); > here is the output: [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 [ 107.510541] mmc0: 4 bytes transferred: 0 [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 Helmut