On 07/15/2016 12:02 AM, Thierry Reding wrote: > On Thu, Jul 14, 2016 at 06:48:57PM +0200, Ralf Ramsauer wrote: >> c90bb7b enabled the high speed UARTs of the Jetson TK1. The address >> specification inside the dts is wrong. Fix it and use the correct >> address. >> >> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree") >> Signed-off-by: Ralf Ramsauer >> --- >> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) > > These addresses are correct. The 0, prefix was dropped from the unit > address in commit b5896f67ab3c ("ARM: tegra: Remove commas from unit > addresses on Tegra124"). > > What's the problem that you're seeing? What's not working for you? I cannot find b5896f67ab3c neither in swarren's tree nor in linux upstream. But there's d0bc5aaf890 in swarren's linux-tegra tree that matches your described changes and was committed on 1st of July. But this patch is not upstream yet, while the other patch is. Have a look at mainline tegra124-jetson-tk1.dts, there the addresses are erroneous as they still use the 0, annotation. And I just realised, that somehow, upstream patch c90bb7b slightly differs from my initial patch [1] on the mailing list. Ralf [1] http://permalink.gmane.org/gmane.linux.ports.tegra/24779 > > Thierry > -- Ralf Ramsauer PGP: 0x8F10049B