From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753032AbdJTLym (ORCPT ); Fri, 20 Oct 2017 07:54:42 -0400 Received: from fllnx210.ext.ti.com ([198.47.19.17]:61690 "EHLO fllnx210.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752649AbdJTLyk (ORCPT ); Fri, 20 Oct 2017 07:54:40 -0400 Subject: Re: [PATCH v2] mtd: nand: omap2: Fix subpage write To: Boris Brezillon CC: , , , , , "# v4 . 12+" References: <1508402489-7436-1-git-send-email-rogerq@ti.com> <76f4dd14-7cc8-4990-23e6-4caa1fee71df@ti.com> <20171020132503.229b821b@bbrezillon> From: Roger Quadros Message-ID: <8af9b5b8-87c2-f9dc-1ede-01493aef46a0@ti.com> Date: Fri, 20 Oct 2017 14:54:07 +0300 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.4.0 MIME-Version: 1.0 In-Reply-To: <20171020132503.229b821b@bbrezillon> Content-Type: text/plain; charset="utf-8" Content-Language: en-GB Content-Transfer-Encoding: 7bit X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 20/10/17 14:25, Boris Brezillon wrote: > On Fri, 20 Oct 2017 12:59:31 +0300 > Roger Quadros wrote: > >> Since v4.12, NAND subpage writes were causing a NULL pointer >> dereference on OMAP platforms (omap2-nand) using OMAP_ECC_BCH4_CODE_HW, >> OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH16_CODE_HW. >> >> This is because for those ECC modes, omap_calculate_ecc_bch() >> generates ECC bytes for the entire (multi-sector) page and this can >> overflow the ECC buffer provided by nand_write_subpage_hwecc() >> as it expects ecc.calculate() to return ECC bytes for just one sector. >> >> However, the root cause of the problem is present much before >> v4.12 but was not seen then as NAND buffers were being allocated >> as one big chunck prior to >> commit 3deb9979c731 ("mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset") >> >> Fix the issue by providing a OMAP optimized write_subpage() implementation. >> > > Fixes: xxxx ("yyyy") > > xxx being the commit that introduced the omap_calculate_ecc_bch() and > assign chip->ecc.calculate to it. got it. > >> cc: # v4.12+ > > Shouldn't we try to backport the patch to pre-4.12 versions? I mean, > the buffer overflow exist there as well, and we don't know what it > corrupts exactly, but it's potentially harmful. I agree. I'll remove the "# v4.12+" > >> Signed-off-by: Roger Quadros >> --- >> Changelog: >> v2 >> - set ecc.calculate() to NULL for BCH4/8/16 with HW correction as in this >> mode we don't support/need single sector ECC calculations to be used by NAND core. >> - call omap_calculate_ecc_bch_multi() directly from omap_read/write_page_bch(). >> >> drivers/mtd/nand/omap2.c | 338 +++++++++++++++++++++++++++++++---------------- >> 1 file changed, 225 insertions(+), 113 deletions(-) >> >> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c >> index 54540c8..a0bd456 100644 >> --- a/drivers/mtd/nand/omap2.c >> +++ b/drivers/mtd/nand/omap2.c >> @@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, >> 0x97, 0x79, 0xe5, 0x24, 0xb5}; >> >> /** >> - * omap_calculate_ecc_bch - Generate bytes of ECC bytes >> + * _omap_calculate_ecc_bch - Generate ECC bytes for one sector >> * @mtd: MTD device structure >> * @dat: The pointer to data on which ecc is computed >> * @ecc_code: The ecc_code buffer >> + * @i: The sector number (for a multi sector page) >> * >> - * Support calculating of BCH4/8 ecc vectors for the page >> + * Support calculating of BCH4/8/16 ECC vectors for one sector >> + * within a page. Sector number is in @i. >> */ >> -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, >> - const u_char *dat, u_char *ecc_calc) >> +static int _omap_calculate_ecc_bch(struct mtd_info *mtd, >> + const u_char *dat, u_char *ecc_calc, int i) >> { >> struct omap_nand_info *info = mtd_to_omap(mtd); >> int eccbytes = info->nand.ecc.bytes; >> struct gpmc_nand_regs *gpmc_regs = &info->reg; >> u8 *ecc_code; >> - unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; >> + unsigned long bch_val1, bch_val2, bch_val3, bch_val4; >> u32 val; >> - int i, j; >> + int j; >> + >> + ecc_code = ecc_calc; >> + switch (info->ecc_opt) { >> + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> + case OMAP_ECC_BCH8_CODE_HW: >> + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); >> + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); >> + *ecc_code++ = (bch_val4 & 0xFF); >> + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); >> + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); >> + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); >> + *ecc_code++ = (bch_val3 & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); >> + *ecc_code++ = (bch_val2 & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); >> + *ecc_code++ = (bch_val1 & 0xFF); >> + break; >> + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> + case OMAP_ECC_BCH4_CODE_HW: >> + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); >> + *ecc_code++ = ((bch_val2 & 0xF) << 4) | >> + ((bch_val1 >> 28) & 0xF); >> + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); >> + *ecc_code++ = ((bch_val1 & 0xF) << 4); >> + break; >> + case OMAP_ECC_BCH16_CODE_HW: >> + val = readl(gpmc_regs->gpmc_bch_result6[i]); >> + ecc_code[0] = ((val >> 8) & 0xFF); >> + ecc_code[1] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result5[i]); >> + ecc_code[2] = ((val >> 24) & 0xFF); >> + ecc_code[3] = ((val >> 16) & 0xFF); >> + ecc_code[4] = ((val >> 8) & 0xFF); >> + ecc_code[5] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result4[i]); >> + ecc_code[6] = ((val >> 24) & 0xFF); >> + ecc_code[7] = ((val >> 16) & 0xFF); >> + ecc_code[8] = ((val >> 8) & 0xFF); >> + ecc_code[9] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result3[i]); >> + ecc_code[10] = ((val >> 24) & 0xFF); >> + ecc_code[11] = ((val >> 16) & 0xFF); >> + ecc_code[12] = ((val >> 8) & 0xFF); >> + ecc_code[13] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result2[i]); >> + ecc_code[14] = ((val >> 24) & 0xFF); >> + ecc_code[15] = ((val >> 16) & 0xFF); >> + ecc_code[16] = ((val >> 8) & 0xFF); >> + ecc_code[17] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result1[i]); >> + ecc_code[18] = ((val >> 24) & 0xFF); >> + ecc_code[19] = ((val >> 16) & 0xFF); >> + ecc_code[20] = ((val >> 8) & 0xFF); >> + ecc_code[21] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result0[i]); >> + ecc_code[22] = ((val >> 24) & 0xFF); >> + ecc_code[23] = ((val >> 16) & 0xFF); >> + ecc_code[24] = ((val >> 8) & 0xFF); >> + ecc_code[25] = ((val >> 0) & 0xFF); >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + /* ECC scheme specific syndrome customizations */ >> + switch (info->ecc_opt) { >> + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> + /* Add constant polynomial to remainder, so that >> + * ECC of blank pages results in 0x0 on reading back >> + */ >> + for (j = 0; j < eccbytes; j++) >> + ecc_calc[j] ^= bch4_polynomial[j]; >> + break; >> + case OMAP_ECC_BCH4_CODE_HW: >> + /* Set 8th ECC byte as 0x0 for ROM compatibility */ >> + ecc_calc[eccbytes - 1] = 0x0; >> + break; >> + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> + /* Add constant polynomial to remainder, so that >> + * ECC of blank pages results in 0x0 on reading back >> + */ >> + for (j = 0; j < eccbytes; j++) >> + ecc_calc[j] ^= bch8_polynomial[j]; >> + break; >> + case OMAP_ECC_BCH8_CODE_HW: >> + /* Set 14th ECC byte as 0x0 for ROM compatibility */ >> + ecc_calc[eccbytes - 1] = 0x0; >> + break; >> + case OMAP_ECC_BCH16_CODE_HW: >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> +/** >> + * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction >> + * @mtd: MTD device structure >> + * @dat: The pointer to data on which ecc is computed >> + * @ecc_code: The ecc_code buffer >> + * >> + * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used >> + * when SW based correction is required as ECC is required for one sector >> + * at a time. >> + */ >> +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, >> + const u_char *dat, u_char *ecc_calc) >> +{ >> + return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0); >> +} >> + >> +/** >> + * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors >> + * @mtd: MTD device structure >> + * @dat: The pointer to data on which ecc is computed >> + * @ecc_code: The ecc_code buffer >> + * >> + * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go. >> + */ >> +static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd, >> + const u_char *dat, u_char *ecc_calc) >> +{ >> + struct omap_nand_info *info = mtd_to_omap(mtd); >> + int eccbytes = info->nand.ecc.bytes; >> + unsigned long nsectors; >> + int i, ret; >> >> nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; >> for (i = 0; i < nsectors; i++) { >> - ecc_code = ecc_calc; >> - switch (info->ecc_opt) { >> - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> - case OMAP_ECC_BCH8_CODE_HW: >> - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> - bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); >> - bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); >> - *ecc_code++ = (bch_val4 & 0xFF); >> - *ecc_code++ = ((bch_val3 >> 24) & 0xFF); >> - *ecc_code++ = ((bch_val3 >> 16) & 0xFF); >> - *ecc_code++ = ((bch_val3 >> 8) & 0xFF); >> - *ecc_code++ = (bch_val3 & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 24) & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 16) & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 8) & 0xFF); >> - *ecc_code++ = (bch_val2 & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 24) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 16) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 8) & 0xFF); >> - *ecc_code++ = (bch_val1 & 0xFF); >> - break; >> - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> - case OMAP_ECC_BCH4_CODE_HW: >> - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> - *ecc_code++ = ((bch_val2 >> 12) & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 4) & 0xFF); >> - *ecc_code++ = ((bch_val2 & 0xF) << 4) | >> - ((bch_val1 >> 28) & 0xF); >> - *ecc_code++ = ((bch_val1 >> 20) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 12) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 4) & 0xFF); >> - *ecc_code++ = ((bch_val1 & 0xF) << 4); >> - break; >> - case OMAP_ECC_BCH16_CODE_HW: >> - val = readl(gpmc_regs->gpmc_bch_result6[i]); >> - ecc_code[0] = ((val >> 8) & 0xFF); >> - ecc_code[1] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result5[i]); >> - ecc_code[2] = ((val >> 24) & 0xFF); >> - ecc_code[3] = ((val >> 16) & 0xFF); >> - ecc_code[4] = ((val >> 8) & 0xFF); >> - ecc_code[5] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result4[i]); >> - ecc_code[6] = ((val >> 24) & 0xFF); >> - ecc_code[7] = ((val >> 16) & 0xFF); >> - ecc_code[8] = ((val >> 8) & 0xFF); >> - ecc_code[9] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result3[i]); >> - ecc_code[10] = ((val >> 24) & 0xFF); >> - ecc_code[11] = ((val >> 16) & 0xFF); >> - ecc_code[12] = ((val >> 8) & 0xFF); >> - ecc_code[13] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result2[i]); >> - ecc_code[14] = ((val >> 24) & 0xFF); >> - ecc_code[15] = ((val >> 16) & 0xFF); >> - ecc_code[16] = ((val >> 8) & 0xFF); >> - ecc_code[17] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result1[i]); >> - ecc_code[18] = ((val >> 24) & 0xFF); >> - ecc_code[19] = ((val >> 16) & 0xFF); >> - ecc_code[20] = ((val >> 8) & 0xFF); >> - ecc_code[21] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result0[i]); >> - ecc_code[22] = ((val >> 24) & 0xFF); >> - ecc_code[23] = ((val >> 16) & 0xFF); >> - ecc_code[24] = ((val >> 8) & 0xFF); >> - ecc_code[25] = ((val >> 0) & 0xFF); >> - break; >> - default: >> - return -EINVAL; >> - } >> - >> - /* ECC scheme specific syndrome customizations */ >> - switch (info->ecc_opt) { >> - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> - /* Add constant polynomial to remainder, so that >> - * ECC of blank pages results in 0x0 on reading back */ >> - for (j = 0; j < eccbytes; j++) >> - ecc_calc[j] ^= bch4_polynomial[j]; >> - break; >> - case OMAP_ECC_BCH4_CODE_HW: >> - /* Set 8th ECC byte as 0x0 for ROM compatibility */ >> - ecc_calc[eccbytes - 1] = 0x0; >> - break; >> - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> - /* Add constant polynomial to remainder, so that >> - * ECC of blank pages results in 0x0 on reading back */ >> - for (j = 0; j < eccbytes; j++) >> - ecc_calc[j] ^= bch8_polynomial[j]; >> - break; >> - case OMAP_ECC_BCH8_CODE_HW: >> - /* Set 14th ECC byte as 0x0 for ROM compatibility */ >> - ecc_calc[eccbytes - 1] = 0x0; >> - break; >> - case OMAP_ECC_BCH16_CODE_HW: >> - break; >> - default: >> - return -EINVAL; >> - } >> + ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i); >> + if (ret) >> + return ret; >> >> - ecc_calc += eccbytes; >> + ecc_calc += eccbytes; >> } >> >> return 0; >> @@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, >> } >> >> /** >> + * omap_write_subpage_bch - BCH hardware ECC based subpage write >> + * @mtd: mtd info structure >> + * @chip: nand chip info structure >> + * @offset: column address of subpage within the page >> + * @data_len: data length >> + * @buf: data buffer >> + * @oob_required: must write chip->oob_poi to OOB >> + * @page: page number to write >> + * >> + * OMAP optimized subpage write method. >> + */ >> +static int omap_write_subpage_bch(struct mtd_info *mtd, >> + struct nand_chip *chip, u32 offset, >> + u32 data_len, const u8 *buf, >> + int oob_required, int page) >> +{ >> + u8 *ecc_calc = chip->buffers->ecccalc; >> + int ecc_size = chip->ecc.size; >> + int ecc_bytes = chip->ecc.bytes; >> + int ecc_steps = chip->ecc.steps; >> + u32 start_step = offset / ecc_size; >> + u32 end_step = (offset + data_len - 1) / ecc_size; >> + int step, ret = 0; >> + >> + /* >> + * Write entire page at one go as it would be optimal >> + * as ECC is calculated by hardware. >> + * ECC is calculated for all subpages but we choose >> + * only what we want. >> + */ >> + >> + /* Enable GPMC ECC engine */ >> + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); >> + >> + /* Write data */ >> + chip->write_buf(mtd, buf, mtd->writesize); >> + >> + for (step = 0; step < ecc_steps; step++) { >> + /* mask ECC of un-touched subpages by padding 0xFF */ >> + if (step < start_step || step > end_step) >> + memset(ecc_calc, 0xff, ecc_bytes); >> + else >> + ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step); >> + >> + if (ret) >> + return ret; >> + >> + buf += ecc_size; >> + ecc_calc += ecc_bytes; >> + } >> + >> + /* copy calculated ECC for whole page to chip->buffer->oob */ >> + /* this include masked-value(0xFF) for unwritten subpages */ >> + ecc_calc = chip->buffers->ecccalc; >> + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, >> + chip->ecc.total); >> + if (ret) >> + return ret; >> + >> + /* write OOB buffer to NAND device */ >> + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); >> + >> + return 0; >> +} >> + >> +/** >> * omap_read_page_bch - BCH ecc based page read function for entire page >> * @mtd: mtd info structure >> * @chip: nand chip info structure >> @@ -2044,7 +2153,7 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 4; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = nand_bch_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; >> mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); >> /* Reserve one byte for the OMAP marker */ >> oobbytes_per_step = nand_chip->ecc.bytes + 1; >> @@ -2066,9 +2175,10 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 4; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = omap_elm_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_multi; > > It's still wrong. Didn't you say you would leave ecc->calculate > unassigned in this case? > >> nand_chip->ecc.read_page = omap_read_page_bch; >> nand_chip->ecc.write_page = omap_write_page_bch; >> + nand_chip->ecc.write_subpage = omap_write_subpage_bch; >> mtd_set_ooblayout(mtd, &omap_ooblayout_ops); >> oobbytes_per_step = nand_chip->ecc.bytes; >> >> @@ -2087,7 +2197,7 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 8; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = nand_bch_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; >> mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); >> /* Reserve one byte for the OMAP marker */ >> oobbytes_per_step = nand_chip->ecc.bytes + 1; >> @@ -2109,9 +2219,10 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 8; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = omap_elm_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_multi; >> nand_chip->ecc.read_page = omap_read_page_bch; >> nand_chip->ecc.write_page = omap_write_page_bch; >> + nand_chip->ecc.write_subpage = omap_write_subpage_bch; >> mtd_set_ooblayout(mtd, &omap_ooblayout_ops); >> oobbytes_per_step = nand_chip->ecc.bytes; >> >> @@ -2131,9 +2242,10 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 16; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = omap_elm_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_multi; >> nand_chip->ecc.read_page = omap_read_page_bch; >> nand_chip->ecc.write_page = omap_write_page_bch; >> + nand_chip->ecc.write_subpage = omap_write_subpage_bch; >> mtd_set_ooblayout(mtd, &omap_ooblayout_ops); >> oobbytes_per_step = nand_chip->ecc.bytes; >> > -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: Re: [PATCH v2] mtd: nand: omap2: Fix subpage write Date: Fri, 20 Oct 2017 14:54:07 +0300 Message-ID: <8af9b5b8-87c2-f9dc-1ede-01493aef46a0@ti.com> References: <1508402489-7436-1-git-send-email-rogerq@ti.com> <76f4dd14-7cc8-4990-23e6-4caa1fee71df@ti.com> <20171020132503.229b821b@bbrezillon> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20171020132503.229b821b@bbrezillon> Content-Language: en-GB Sender: stable-owner@vger.kernel.org To: Boris Brezillon Cc: richard@nod.at, tony@atomide.com, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, "# v4 . 12+" List-Id: linux-omap@vger.kernel.org On 20/10/17 14:25, Boris Brezillon wrote: > On Fri, 20 Oct 2017 12:59:31 +0300 > Roger Quadros wrote: > >> Since v4.12, NAND subpage writes were causing a NULL pointer >> dereference on OMAP platforms (omap2-nand) using OMAP_ECC_BCH4_CODE_HW, >> OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH16_CODE_HW. >> >> This is because for those ECC modes, omap_calculate_ecc_bch() >> generates ECC bytes for the entire (multi-sector) page and this can >> overflow the ECC buffer provided by nand_write_subpage_hwecc() >> as it expects ecc.calculate() to return ECC bytes for just one sector. >> >> However, the root cause of the problem is present much before >> v4.12 but was not seen then as NAND buffers were being allocated >> as one big chunck prior to >> commit 3deb9979c731 ("mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset") >> >> Fix the issue by providing a OMAP optimized write_subpage() implementation. >> > > Fixes: xxxx ("yyyy") > > xxx being the commit that introduced the omap_calculate_ecc_bch() and > assign chip->ecc.calculate to it. got it. > >> cc: # v4.12+ > > Shouldn't we try to backport the patch to pre-4.12 versions? I mean, > the buffer overflow exist there as well, and we don't know what it > corrupts exactly, but it's potentially harmful. I agree. I'll remove the "# v4.12+" > >> Signed-off-by: Roger Quadros >> --- >> Changelog: >> v2 >> - set ecc.calculate() to NULL for BCH4/8/16 with HW correction as in this >> mode we don't support/need single sector ECC calculations to be used by NAND core. >> - call omap_calculate_ecc_bch_multi() directly from omap_read/write_page_bch(). >> >> drivers/mtd/nand/omap2.c | 338 +++++++++++++++++++++++++++++++---------------- >> 1 file changed, 225 insertions(+), 113 deletions(-) >> >> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c >> index 54540c8..a0bd456 100644 >> --- a/drivers/mtd/nand/omap2.c >> +++ b/drivers/mtd/nand/omap2.c >> @@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, >> 0x97, 0x79, 0xe5, 0x24, 0xb5}; >> >> /** >> - * omap_calculate_ecc_bch - Generate bytes of ECC bytes >> + * _omap_calculate_ecc_bch - Generate ECC bytes for one sector >> * @mtd: MTD device structure >> * @dat: The pointer to data on which ecc is computed >> * @ecc_code: The ecc_code buffer >> + * @i: The sector number (for a multi sector page) >> * >> - * Support calculating of BCH4/8 ecc vectors for the page >> + * Support calculating of BCH4/8/16 ECC vectors for one sector >> + * within a page. Sector number is in @i. >> */ >> -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, >> - const u_char *dat, u_char *ecc_calc) >> +static int _omap_calculate_ecc_bch(struct mtd_info *mtd, >> + const u_char *dat, u_char *ecc_calc, int i) >> { >> struct omap_nand_info *info = mtd_to_omap(mtd); >> int eccbytes = info->nand.ecc.bytes; >> struct gpmc_nand_regs *gpmc_regs = &info->reg; >> u8 *ecc_code; >> - unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; >> + unsigned long bch_val1, bch_val2, bch_val3, bch_val4; >> u32 val; >> - int i, j; >> + int j; >> + >> + ecc_code = ecc_calc; >> + switch (info->ecc_opt) { >> + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> + case OMAP_ECC_BCH8_CODE_HW: >> + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); >> + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); >> + *ecc_code++ = (bch_val4 & 0xFF); >> + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); >> + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); >> + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); >> + *ecc_code++ = (bch_val3 & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); >> + *ecc_code++ = (bch_val2 & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); >> + *ecc_code++ = (bch_val1 & 0xFF); >> + break; >> + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> + case OMAP_ECC_BCH4_CODE_HW: >> + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); >> + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); >> + *ecc_code++ = ((bch_val2 & 0xF) << 4) | >> + ((bch_val1 >> 28) & 0xF); >> + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); >> + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); >> + *ecc_code++ = ((bch_val1 & 0xF) << 4); >> + break; >> + case OMAP_ECC_BCH16_CODE_HW: >> + val = readl(gpmc_regs->gpmc_bch_result6[i]); >> + ecc_code[0] = ((val >> 8) & 0xFF); >> + ecc_code[1] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result5[i]); >> + ecc_code[2] = ((val >> 24) & 0xFF); >> + ecc_code[3] = ((val >> 16) & 0xFF); >> + ecc_code[4] = ((val >> 8) & 0xFF); >> + ecc_code[5] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result4[i]); >> + ecc_code[6] = ((val >> 24) & 0xFF); >> + ecc_code[7] = ((val >> 16) & 0xFF); >> + ecc_code[8] = ((val >> 8) & 0xFF); >> + ecc_code[9] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result3[i]); >> + ecc_code[10] = ((val >> 24) & 0xFF); >> + ecc_code[11] = ((val >> 16) & 0xFF); >> + ecc_code[12] = ((val >> 8) & 0xFF); >> + ecc_code[13] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result2[i]); >> + ecc_code[14] = ((val >> 24) & 0xFF); >> + ecc_code[15] = ((val >> 16) & 0xFF); >> + ecc_code[16] = ((val >> 8) & 0xFF); >> + ecc_code[17] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result1[i]); >> + ecc_code[18] = ((val >> 24) & 0xFF); >> + ecc_code[19] = ((val >> 16) & 0xFF); >> + ecc_code[20] = ((val >> 8) & 0xFF); >> + ecc_code[21] = ((val >> 0) & 0xFF); >> + val = readl(gpmc_regs->gpmc_bch_result0[i]); >> + ecc_code[22] = ((val >> 24) & 0xFF); >> + ecc_code[23] = ((val >> 16) & 0xFF); >> + ecc_code[24] = ((val >> 8) & 0xFF); >> + ecc_code[25] = ((val >> 0) & 0xFF); >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + /* ECC scheme specific syndrome customizations */ >> + switch (info->ecc_opt) { >> + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> + /* Add constant polynomial to remainder, so that >> + * ECC of blank pages results in 0x0 on reading back >> + */ >> + for (j = 0; j < eccbytes; j++) >> + ecc_calc[j] ^= bch4_polynomial[j]; >> + break; >> + case OMAP_ECC_BCH4_CODE_HW: >> + /* Set 8th ECC byte as 0x0 for ROM compatibility */ >> + ecc_calc[eccbytes - 1] = 0x0; >> + break; >> + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> + /* Add constant polynomial to remainder, so that >> + * ECC of blank pages results in 0x0 on reading back >> + */ >> + for (j = 0; j < eccbytes; j++) >> + ecc_calc[j] ^= bch8_polynomial[j]; >> + break; >> + case OMAP_ECC_BCH8_CODE_HW: >> + /* Set 14th ECC byte as 0x0 for ROM compatibility */ >> + ecc_calc[eccbytes - 1] = 0x0; >> + break; >> + case OMAP_ECC_BCH16_CODE_HW: >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> +/** >> + * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction >> + * @mtd: MTD device structure >> + * @dat: The pointer to data on which ecc is computed >> + * @ecc_code: The ecc_code buffer >> + * >> + * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used >> + * when SW based correction is required as ECC is required for one sector >> + * at a time. >> + */ >> +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, >> + const u_char *dat, u_char *ecc_calc) >> +{ >> + return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0); >> +} >> + >> +/** >> + * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors >> + * @mtd: MTD device structure >> + * @dat: The pointer to data on which ecc is computed >> + * @ecc_code: The ecc_code buffer >> + * >> + * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go. >> + */ >> +static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd, >> + const u_char *dat, u_char *ecc_calc) >> +{ >> + struct omap_nand_info *info = mtd_to_omap(mtd); >> + int eccbytes = info->nand.ecc.bytes; >> + unsigned long nsectors; >> + int i, ret; >> >> nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; >> for (i = 0; i < nsectors; i++) { >> - ecc_code = ecc_calc; >> - switch (info->ecc_opt) { >> - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> - case OMAP_ECC_BCH8_CODE_HW: >> - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> - bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); >> - bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); >> - *ecc_code++ = (bch_val4 & 0xFF); >> - *ecc_code++ = ((bch_val3 >> 24) & 0xFF); >> - *ecc_code++ = ((bch_val3 >> 16) & 0xFF); >> - *ecc_code++ = ((bch_val3 >> 8) & 0xFF); >> - *ecc_code++ = (bch_val3 & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 24) & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 16) & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 8) & 0xFF); >> - *ecc_code++ = (bch_val2 & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 24) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 16) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 8) & 0xFF); >> - *ecc_code++ = (bch_val1 & 0xFF); >> - break; >> - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> - case OMAP_ECC_BCH4_CODE_HW: >> - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); >> - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); >> - *ecc_code++ = ((bch_val2 >> 12) & 0xFF); >> - *ecc_code++ = ((bch_val2 >> 4) & 0xFF); >> - *ecc_code++ = ((bch_val2 & 0xF) << 4) | >> - ((bch_val1 >> 28) & 0xF); >> - *ecc_code++ = ((bch_val1 >> 20) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 12) & 0xFF); >> - *ecc_code++ = ((bch_val1 >> 4) & 0xFF); >> - *ecc_code++ = ((bch_val1 & 0xF) << 4); >> - break; >> - case OMAP_ECC_BCH16_CODE_HW: >> - val = readl(gpmc_regs->gpmc_bch_result6[i]); >> - ecc_code[0] = ((val >> 8) & 0xFF); >> - ecc_code[1] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result5[i]); >> - ecc_code[2] = ((val >> 24) & 0xFF); >> - ecc_code[3] = ((val >> 16) & 0xFF); >> - ecc_code[4] = ((val >> 8) & 0xFF); >> - ecc_code[5] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result4[i]); >> - ecc_code[6] = ((val >> 24) & 0xFF); >> - ecc_code[7] = ((val >> 16) & 0xFF); >> - ecc_code[8] = ((val >> 8) & 0xFF); >> - ecc_code[9] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result3[i]); >> - ecc_code[10] = ((val >> 24) & 0xFF); >> - ecc_code[11] = ((val >> 16) & 0xFF); >> - ecc_code[12] = ((val >> 8) & 0xFF); >> - ecc_code[13] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result2[i]); >> - ecc_code[14] = ((val >> 24) & 0xFF); >> - ecc_code[15] = ((val >> 16) & 0xFF); >> - ecc_code[16] = ((val >> 8) & 0xFF); >> - ecc_code[17] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result1[i]); >> - ecc_code[18] = ((val >> 24) & 0xFF); >> - ecc_code[19] = ((val >> 16) & 0xFF); >> - ecc_code[20] = ((val >> 8) & 0xFF); >> - ecc_code[21] = ((val >> 0) & 0xFF); >> - val = readl(gpmc_regs->gpmc_bch_result0[i]); >> - ecc_code[22] = ((val >> 24) & 0xFF); >> - ecc_code[23] = ((val >> 16) & 0xFF); >> - ecc_code[24] = ((val >> 8) & 0xFF); >> - ecc_code[25] = ((val >> 0) & 0xFF); >> - break; >> - default: >> - return -EINVAL; >> - } >> - >> - /* ECC scheme specific syndrome customizations */ >> - switch (info->ecc_opt) { >> - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: >> - /* Add constant polynomial to remainder, so that >> - * ECC of blank pages results in 0x0 on reading back */ >> - for (j = 0; j < eccbytes; j++) >> - ecc_calc[j] ^= bch4_polynomial[j]; >> - break; >> - case OMAP_ECC_BCH4_CODE_HW: >> - /* Set 8th ECC byte as 0x0 for ROM compatibility */ >> - ecc_calc[eccbytes - 1] = 0x0; >> - break; >> - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: >> - /* Add constant polynomial to remainder, so that >> - * ECC of blank pages results in 0x0 on reading back */ >> - for (j = 0; j < eccbytes; j++) >> - ecc_calc[j] ^= bch8_polynomial[j]; >> - break; >> - case OMAP_ECC_BCH8_CODE_HW: >> - /* Set 14th ECC byte as 0x0 for ROM compatibility */ >> - ecc_calc[eccbytes - 1] = 0x0; >> - break; >> - case OMAP_ECC_BCH16_CODE_HW: >> - break; >> - default: >> - return -EINVAL; >> - } >> + ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i); >> + if (ret) >> + return ret; >> >> - ecc_calc += eccbytes; >> + ecc_calc += eccbytes; >> } >> >> return 0; >> @@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, >> } >> >> /** >> + * omap_write_subpage_bch - BCH hardware ECC based subpage write >> + * @mtd: mtd info structure >> + * @chip: nand chip info structure >> + * @offset: column address of subpage within the page >> + * @data_len: data length >> + * @buf: data buffer >> + * @oob_required: must write chip->oob_poi to OOB >> + * @page: page number to write >> + * >> + * OMAP optimized subpage write method. >> + */ >> +static int omap_write_subpage_bch(struct mtd_info *mtd, >> + struct nand_chip *chip, u32 offset, >> + u32 data_len, const u8 *buf, >> + int oob_required, int page) >> +{ >> + u8 *ecc_calc = chip->buffers->ecccalc; >> + int ecc_size = chip->ecc.size; >> + int ecc_bytes = chip->ecc.bytes; >> + int ecc_steps = chip->ecc.steps; >> + u32 start_step = offset / ecc_size; >> + u32 end_step = (offset + data_len - 1) / ecc_size; >> + int step, ret = 0; >> + >> + /* >> + * Write entire page at one go as it would be optimal >> + * as ECC is calculated by hardware. >> + * ECC is calculated for all subpages but we choose >> + * only what we want. >> + */ >> + >> + /* Enable GPMC ECC engine */ >> + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); >> + >> + /* Write data */ >> + chip->write_buf(mtd, buf, mtd->writesize); >> + >> + for (step = 0; step < ecc_steps; step++) { >> + /* mask ECC of un-touched subpages by padding 0xFF */ >> + if (step < start_step || step > end_step) >> + memset(ecc_calc, 0xff, ecc_bytes); >> + else >> + ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step); >> + >> + if (ret) >> + return ret; >> + >> + buf += ecc_size; >> + ecc_calc += ecc_bytes; >> + } >> + >> + /* copy calculated ECC for whole page to chip->buffer->oob */ >> + /* this include masked-value(0xFF) for unwritten subpages */ >> + ecc_calc = chip->buffers->ecccalc; >> + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, >> + chip->ecc.total); >> + if (ret) >> + return ret; >> + >> + /* write OOB buffer to NAND device */ >> + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); >> + >> + return 0; >> +} >> + >> +/** >> * omap_read_page_bch - BCH ecc based page read function for entire page >> * @mtd: mtd info structure >> * @chip: nand chip info structure >> @@ -2044,7 +2153,7 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 4; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = nand_bch_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; >> mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); >> /* Reserve one byte for the OMAP marker */ >> oobbytes_per_step = nand_chip->ecc.bytes + 1; >> @@ -2066,9 +2175,10 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 4; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = omap_elm_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_multi; > > It's still wrong. Didn't you say you would leave ecc->calculate > unassigned in this case? > >> nand_chip->ecc.read_page = omap_read_page_bch; >> nand_chip->ecc.write_page = omap_write_page_bch; >> + nand_chip->ecc.write_subpage = omap_write_subpage_bch; >> mtd_set_ooblayout(mtd, &omap_ooblayout_ops); >> oobbytes_per_step = nand_chip->ecc.bytes; >> >> @@ -2087,7 +2197,7 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 8; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = nand_bch_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; >> mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); >> /* Reserve one byte for the OMAP marker */ >> oobbytes_per_step = nand_chip->ecc.bytes + 1; >> @@ -2109,9 +2219,10 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 8; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = omap_elm_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_multi; >> nand_chip->ecc.read_page = omap_read_page_bch; >> nand_chip->ecc.write_page = omap_write_page_bch; >> + nand_chip->ecc.write_subpage = omap_write_subpage_bch; >> mtd_set_ooblayout(mtd, &omap_ooblayout_ops); >> oobbytes_per_step = nand_chip->ecc.bytes; >> >> @@ -2131,9 +2242,10 @@ static int omap_nand_probe(struct platform_device *pdev) >> nand_chip->ecc.strength = 16; >> nand_chip->ecc.hwctl = omap_enable_hwecc_bch; >> nand_chip->ecc.correct = omap_elm_correct_data; >> - nand_chip->ecc.calculate = omap_calculate_ecc_bch; >> + nand_chip->ecc.calculate = omap_calculate_ecc_bch_multi; >> nand_chip->ecc.read_page = omap_read_page_bch; >> nand_chip->ecc.write_page = omap_write_page_bch; >> + nand_chip->ecc.write_subpage = omap_write_subpage_bch; >> mtd_set_ooblayout(mtd, &omap_ooblayout_ops); >> oobbytes_per_step = nand_chip->ecc.bytes; >> > -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki