[PATCH v2 00/50] hppa: general improvements and tidy-ups

[PATCH v2 00/50] hppa: general improvements and tidy-ups

[Mark Cave-Ayland]

This patchset started off when I noticed that dino.c was accessing parent_obj
directly rather than using a QOM cast. After fixing that I noticed quite a few
other improvements that could be done to bring hppa up to our recommended
coding standards.

The main aim of this patchset is to de-couple the dino and lasi devices from
the board using QOM to handle the initialisation instead of having global
device init functions. Included in this is switching the onboard devices
over to use qdev GPIOs for wiring instead of directly allocating QEMU IRQs.

Along the way I've renamed the board config from CONFIG_DINO to
CONFIG_HPPA_B160L since that better represents the machine type, and then
used CONFIG_DINO and CONFIG_LASI for the appropriate devices which have been
moved to hw/pci-host/dino.c and hw/misc/lasi.c respectively.

After the reorganisation it was trivial to remove hppa_sys.h and the majority
of pci.c which wasn't being used. Finally I tidied up the use of the QOM
machine type macros in machine.c.

The result has been lightly tested with a tiny Linux image I had lying around
for testing my recent ESP changes, so more testing is welcome. There is a bit
more work to be done sorting out the lasips2 device init and machine init, but
since the patchset is already quite big I can follow up with that once this
series has been merged.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

v2:
- Rebase onto master
- Add R-B tag to patch 1 from Richard
- Add A-B tag from Helge to entire series
- Update patch 12 to use CONFIG_HPPA_B160L instead of CONFIG_HPPA_GENERIC and
  also update the machine description


Mark Cave-Ayland (50):
  dino: checkpatch fixes
  dino: move registers from dino_init() to DINO_PCI_BRIDGE init function
  dino: move PCI bus initialisation to dino_pcihost_init()
  dino: move PCI windows initialisation to dino_pcihost_init()
  dino: add memory-as property containing a link to the memory address
    space
  dino: move pci_setup_iommu() to dino_pcihost_init()
  dino: move PCI bus master address space setup to
    dino_pcihost_realize()
  dino: move initial register configuration to new dino_pcihost_reset()
    function
  dino: use QOM cast instead of directly referencing parent_obj
  dino: return PCIBus from dino_init() using qdev_get_child_bus()
  dino: split declarations from dino.c into dino.h
  hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build
    hppa machine
  dino: change dino_init() to return the DINO device instead of PCIBus
  machine.c: map DINO device during board configuration
  dino.h: add defines for DINO IRQ numbers
  dino: define IRQ inputs as qdev GPIOs
  dino: wire up serial IRQ using a qdev GPIO in machine.c
  dino: remove unused dino_set_timer_irq() IRQ handler
  hppa: move dino_init() from dino.c to machine.c
  dino: use numerical constant for iar0 and iar1 reset values
  dino: move DINO HPA constants from hppa_hardware.h to dino.h
  dino: move from hw/hppa to hw/pci-host
  lasi: checkpatch fixes
  lasi: move memory region initialisation to new lasi_init() function
  lasi: move register memory mapping from lasi.c to machine.c
  lasi: move initialisation of iar and rtc to new lasi_reset() function
  lasi: move LASIState and associated QOM structures to lasi.h
  lasi: replace lasi_get_irq() with defined constants
  lasi: define IRQ inputs as qdev GPIOs
  lasi: use qdev GPIOs to wire up IRQs in lasi_initfn()
  lasi: fix serial port initialisation
  lasi: update lasi_initfn() to return LASIState
  lasi: move LAN initialisation to machine.c
  lasi: move parallel port initialisation to machine.c
  lasi: move second serial port initialisation to machine.c
  lasi: move PS2 initialisation to machine.c
  lasi: remove address space parameter from lasi_initfn()
  lasi: move lasi_initfn() to machine.c
  lasi: use constants for device register offsets
  lasi: use numerical constant for iar reset value
  hppa: move device headers from hppa_sys.h into individual .c files
  lasi: move from hw/hppa to hw/misc
  hppa: move hppa_pci_ignore_ops from pci.c to machine.c
  hppa: remove hw/hppa/pci.c
  hppa: remove unused trace-events from from hw/hppa
  hppa: move enable_lan() define from hppa_sys.h to machine.c
  hppa: remove the empty hppa_sys.h file
  hppa: use MACHINE QOM macros for defining the hppa machine
  hppa: fold machine_hppa_machine_init() into
    machine_hppa_machine_init_class_init()
  hppa: simplify machine function names in machine.c

 MAINTAINERS                              |   4 +
 configs/devices/hppa-softmmu/default.mak |   2 +-
 hw/hppa/Kconfig                          |   5 +-
 hw/hppa/hppa_hardware.h                  |   5 -
 hw/hppa/hppa_sys.h                       |  24 ---
 hw/hppa/machine.c                        | 124 +++++++++---
 hw/hppa/meson.build                      |   2 +-
 hw/hppa/pci.c                            |  88 ---------
 hw/hppa/trace-events                     |  14 --
 hw/misc/Kconfig                          |   3 +
 hw/{hppa => misc}/lasi.c                 | 161 ++++------------
 hw/misc/meson.build                      |   3 +
 hw/misc/trace-events                     |   5 +
 hw/pci-host/Kconfig                      |   4 +
 hw/{hppa => pci-host}/dino.c             | 231 +++++++----------------
 hw/pci-host/meson.build                  |   3 +
 hw/pci-host/trace-events                 |   5 +
 include/hw/misc/lasi.h                   |  78 ++++++++
 include/hw/pci-host/dino.h               | 146 ++++++++++++++
 meson.build                              |   1 -
 20 files changed, 463 insertions(+), 445 deletions(-)
 delete mode 100644 hw/hppa/hppa_sys.h
 delete mode 100644 hw/hppa/pci.c
 delete mode 100644 hw/hppa/trace-events
 rename hw/{hppa => misc}/lasi.c (60%)
 rename hw/{hppa => pci-host}/dino.c (71%)
 create mode 100644 include/hw/misc/lasi.h
 create mode 100644 include/hw/pci-host/dino.h

-- 
2.20.1

[PATCH v2 01/50] dino: checkpatch fixes

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index eab96dd84e..4031cfb7f0 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -101,8 +101,10 @@ static const uint32_t reg800_keep_bits[DINO800_REGS] = {
 struct DinoState {
     PCIHostState parent_obj;
 
-    /* PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
-       so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops.  */
+    /*
+     * PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
+     * so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops.
+     */
     uint32_t config_reg_dino; /* keep original copy, including 2 lowest bits */
 
     uint32_t iar0;
-- 
2.20.1

[PATCH v2 02/50] dino: move registers from dino_init() to DINO_PCI_BRIDGE init function

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 44 +++++++++++++++++++++++++++++---------------
 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 4031cfb7f0..9401b68ff7 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -526,21 +526,6 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     s->iar0 = s->iar1 = CPU_HPA + 3;
     s->toc_addr = 0xFFFA0030; /* IO_COMMAND of CPU */
 
-    /* Dino PCI access from main memory.  */
-    memory_region_init_io(&s->this_mem, OBJECT(s), &dino_chip_ops,
-                          s, "dino", 4096);
-    memory_region_add_subregion(addr_space, DINO_HPA, &s->this_mem);
-
-    /* Dino PCI config. */
-    memory_region_init_io(&s->parent_obj.conf_mem, OBJECT(&s->parent_obj),
-                          &dino_config_addr_ops, dev, "pci-conf-idx", 4);
-    memory_region_init_io(&s->parent_obj.data_mem, OBJECT(&s->parent_obj),
-                          &dino_config_data_ops, dev, "pci-conf-data", 4);
-    memory_region_add_subregion(&s->this_mem, DINO_PCI_CONFIG_ADDR,
-                                &s->parent_obj.conf_mem);
-    memory_region_add_subregion(&s->this_mem, DINO_CONFIG_DATA,
-                                &s->parent_obj.data_mem);
-
     /* Dino PCI bus memory.  */
     memory_region_init(&s->pci_mem, OBJECT(s), "pci-memory", 4 * GiB);
 
@@ -550,6 +535,9 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     s->parent_obj.bus = b;
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
+    memory_region_add_subregion(addr_space, DINO_HPA,
+                                sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0));
+
     /* Set up windows into PCI bus memory.  */
     for (i = 1; i < 31; i++) {
         uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
@@ -588,6 +576,31 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     return b;
 }
 
+static void dino_pcihost_init(Object *obj)
+{
+    DinoState *s = DINO_PCI_HOST_BRIDGE(obj);
+    PCIHostState *phb = PCI_HOST_BRIDGE(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+    /* Dino PCI access from main memory.  */
+    memory_region_init_io(&s->this_mem, OBJECT(s), &dino_chip_ops,
+                          s, "dino", 4096);
+
+    /* Dino PCI config. */
+    memory_region_init_io(&phb->conf_mem, OBJECT(phb),
+                          &dino_config_addr_ops, DEVICE(s),
+                          "pci-conf-idx", 4);
+    memory_region_init_io(&phb->data_mem, OBJECT(phb),
+                          &dino_config_data_ops, DEVICE(s),
+                          "pci-conf-data", 4);
+    memory_region_add_subregion(&s->this_mem, DINO_PCI_CONFIG_ADDR,
+                                &phb->conf_mem);
+    memory_region_add_subregion(&s->this_mem, DINO_CONFIG_DATA,
+                                &phb->data_mem);
+
+    sysbus_init_mmio(sbd, &s->this_mem);
+}
+
 static void dino_pcihost_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -598,6 +611,7 @@ static void dino_pcihost_class_init(ObjectClass *klass, void *data)
 static const TypeInfo dino_pcihost_info = {
     .name          = TYPE_DINO_PCI_HOST_BRIDGE,
     .parent        = TYPE_PCI_HOST_BRIDGE,
+    .instance_init = dino_pcihost_init,
     .instance_size = sizeof(DinoState),
     .class_init    = dino_pcihost_class_init,
 };
-- 
2.20.1

[PATCH v2 03/50] dino: move PCI bus initialisation to dino_pcihost_init()

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 9401b68ff7..c6c01ea14c 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -526,13 +526,7 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     s->iar0 = s->iar1 = CPU_HPA + 3;
     s->toc_addr = 0xFFFA0030; /* IO_COMMAND of CPU */
 
-    /* Dino PCI bus memory.  */
-    memory_region_init(&s->pci_mem, OBJECT(s), "pci-memory", 4 * GiB);
-
-    b = pci_register_root_bus(dev, "pci", dino_set_irq, dino_pci_map_irq, s,
-                              &s->pci_mem, get_system_io(),
-                              PCI_DEVFN(0, 0), 32, TYPE_PCI_BUS);
-    s->parent_obj.bus = b;
+    b = s->parent_obj.bus;
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     memory_region_add_subregion(addr_space, DINO_HPA,
@@ -598,6 +592,14 @@ static void dino_pcihost_init(Object *obj)
     memory_region_add_subregion(&s->this_mem, DINO_CONFIG_DATA,
                                 &phb->data_mem);
 
+    /* Dino PCI bus memory.  */
+    memory_region_init(&s->pci_mem, OBJECT(s), "pci-memory", 4 * GiB);
+
+    phb->bus = pci_register_root_bus(DEVICE(s), "pci",
+                                     dino_set_irq, dino_pci_map_irq, s,
+                                     &s->pci_mem, get_system_io(),
+                                     PCI_DEVFN(0, 0), 32, TYPE_PCI_BUS);
+
     sysbus_init_mmio(sbd, &s->this_mem);
 }
 
-- 
2.20.1

[PATCH v2 04/50] dino: move PCI windows initialisation to dino_pcihost_init()

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index c6c01ea14c..bc27aad5dc 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -519,7 +519,6 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     DeviceState *dev;
     DinoState *s;
     PCIBus *b;
-    int i;
 
     dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
     s = DINO_PCI_HOST_BRIDGE(dev);
@@ -532,16 +531,6 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     memory_region_add_subregion(addr_space, DINO_HPA,
                                 sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0));
 
-    /* Set up windows into PCI bus memory.  */
-    for (i = 1; i < 31; i++) {
-        uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
-        char *name = g_strdup_printf("PCI Outbound Window %d", i);
-        memory_region_init_alias(&s->pci_mem_alias[i], OBJECT(s),
-                                 name, &s->pci_mem, addr,
-                                 DINO_MEM_CHUNK_SIZE);
-        g_free(name);
-    }
-
     /* Set up PCI view of memory: Bus master address space.  */
     memory_region_init(&s->bm, OBJECT(s), "bm-dino", 4 * GiB);
     memory_region_init_alias(&s->bm_ram_alias, OBJECT(s),
@@ -575,6 +564,7 @@ static void dino_pcihost_init(Object *obj)
     DinoState *s = DINO_PCI_HOST_BRIDGE(obj);
     PCIHostState *phb = PCI_HOST_BRIDGE(obj);
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    int i;
 
     /* Dino PCI access from main memory.  */
     memory_region_init_io(&s->this_mem, OBJECT(s), &dino_chip_ops,
@@ -600,6 +590,16 @@ static void dino_pcihost_init(Object *obj)
                                      &s->pci_mem, get_system_io(),
                                      PCI_DEVFN(0, 0), 32, TYPE_PCI_BUS);
 
+    /* Set up windows into PCI bus memory.  */
+    for (i = 1; i < 31; i++) {
+        uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
+        char *name = g_strdup_printf("PCI Outbound Window %d", i);
+        memory_region_init_alias(&s->pci_mem_alias[i], OBJECT(s),
+                                 name, &s->pci_mem, addr,
+                                 DINO_MEM_CHUNK_SIZE);
+        g_free(name);
+    }
+
     sysbus_init_mmio(sbd, &s->this_mem);
 }
 
-- 
2.20.1

[PATCH v2 05/50] dino: add memory-as property containing a link to the memory address space

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index bc27aad5dc..13b2210462 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -17,6 +17,7 @@
 #include "hw/irq.h"
 #include "hw/pci/pci.h"
 #include "hw/pci/pci_bus.h"
+#include "hw/qdev-properties.h"
 #include "migration/vmstate.h"
 #include "hppa_sys.h"
 #include "trace.h"
@@ -124,6 +125,8 @@ struct DinoState {
     MemoryRegion pci_mem;
     MemoryRegion pci_mem_alias[32];
 
+    MemoryRegion *memory_as;
+
     AddressSpace bm_as;
     MemoryRegion bm;
     MemoryRegion bm_ram_alias;
@@ -521,6 +524,8 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     PCIBus *b;
 
     dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
+    object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
+                             &error_fatal);
     s = DINO_PCI_HOST_BRIDGE(dev);
     s->iar0 = s->iar1 = CPU_HPA + 3;
     s->toc_addr = 0xFFFA0030; /* IO_COMMAND of CPU */
@@ -603,10 +608,17 @@ static void dino_pcihost_init(Object *obj)
     sysbus_init_mmio(sbd, &s->this_mem);
 }
 
+static Property dino_pcihost_properties[] = {
+    DEFINE_PROP_LINK("memory-as", DinoState, memory_as, TYPE_MEMORY_REGION,
+                     MemoryRegion *),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void dino_pcihost_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    device_class_set_props(dc, dino_pcihost_properties);
     dc->vmsd = &vmstate_dino;
 }
 
-- 
2.20.1

[PATCH v2 06/50] dino: move pci_setup_iommu() to dino_pcihost_init()

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 13b2210462..dcebb9f98f 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -556,7 +556,6 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     memory_region_add_subregion(&s->bm, 0xfff00000,
                                 &s->bm_cpu_alias);
     address_space_init(&s->bm_as, &s->bm, "pci-bm");
-    pci_setup_iommu(b, dino_pcihost_set_iommu, s);
 
     *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
     *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
@@ -605,6 +604,8 @@ static void dino_pcihost_init(Object *obj)
         g_free(name);
     }
 
+    pci_setup_iommu(phb->bus, dino_pcihost_set_iommu, s);
+
     sysbus_init_mmio(sbd, &s->this_mem);
 }
 
-- 
2.20.1

[PATCH v2 07/50] dino: move PCI bus master address space setup to dino_pcihost_realize()

[Mark Cave-Ayland]

Add a new dino_pcihost_unrealize() function to remove the address space when the
device is unrealized.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index dcebb9f98f..ae79ddbf5c 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -536,17 +536,27 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     memory_region_add_subregion(addr_space, DINO_HPA,
                                 sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0));
 
+    *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
+    *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
+
+    return b;
+}
+
+static void dino_pcihost_realize(DeviceState *dev, Error **errp)
+{
+    DinoState *s = DINO_PCI_HOST_BRIDGE(dev);
+
     /* Set up PCI view of memory: Bus master address space.  */
     memory_region_init(&s->bm, OBJECT(s), "bm-dino", 4 * GiB);
     memory_region_init_alias(&s->bm_ram_alias, OBJECT(s),
-                             "bm-system", addr_space, 0,
+                             "bm-system", s->memory_as, 0,
                              0xf0000000 + DINO_MEM_CHUNK_SIZE);
     memory_region_init_alias(&s->bm_pci_alias, OBJECT(s),
                              "bm-pci", &s->pci_mem,
                              0xf0000000 + DINO_MEM_CHUNK_SIZE,
                              30 * DINO_MEM_CHUNK_SIZE);
     memory_region_init_alias(&s->bm_cpu_alias, OBJECT(s),
-                             "bm-cpu", addr_space, 0xfff00000,
+                             "bm-cpu", s->memory_as, 0xfff00000,
                              0xfffff);
     memory_region_add_subregion(&s->bm, 0,
                                 &s->bm_ram_alias);
@@ -555,12 +565,15 @@ PCIBus *dino_init(MemoryRegion *addr_space,
                                 &s->bm_pci_alias);
     memory_region_add_subregion(&s->bm, 0xfff00000,
                                 &s->bm_cpu_alias);
+
     address_space_init(&s->bm_as, &s->bm, "pci-bm");
+}
 
-    *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
-    *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
+static void dino_pcihost_unrealize(DeviceState *dev)
+{
+    DinoState *s = DINO_PCI_HOST_BRIDGE(dev);
 
-    return b;
+    address_space_destroy(&s->bm_as);
 }
 
 static void dino_pcihost_init(Object *obj)
@@ -619,6 +632,8 @@ static void dino_pcihost_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    dc->realize = dino_pcihost_realize;
+    dc->unrealize = dino_pcihost_unrealize;
     device_class_set_props(dc, dino_pcihost_properties);
     dc->vmsd = &vmstate_dino;
 }
-- 
2.20.1

[PATCH v2 08/50] dino: move initial register configuration to new dino_pcihost_reset() function

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index ae79ddbf5c..d3cd8578a1 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -527,8 +527,6 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
                              &error_fatal);
     s = DINO_PCI_HOST_BRIDGE(dev);
-    s->iar0 = s->iar1 = CPU_HPA + 3;
-    s->toc_addr = 0xFFFA0030; /* IO_COMMAND of CPU */
 
     b = s->parent_obj.bus;
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
@@ -542,6 +540,14 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     return b;
 }
 
+static void dino_pcihost_reset(DeviceState *dev)
+{
+    DinoState *s = DINO_PCI_HOST_BRIDGE(dev);
+
+    s->iar0 = s->iar1 = CPU_HPA + 3;
+    s->toc_addr = 0xFFFA0030; /* IO_COMMAND of CPU */
+}
+
 static void dino_pcihost_realize(DeviceState *dev, Error **errp)
 {
     DinoState *s = DINO_PCI_HOST_BRIDGE(dev);
@@ -632,6 +638,7 @@ static void dino_pcihost_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    dc->reset = dino_pcihost_reset;
     dc->realize = dino_pcihost_realize;
     dc->unrealize = dino_pcihost_unrealize;
     device_class_set_props(dc, dino_pcihost_properties);
-- 
2.20.1

[PATCH v2 09/50] dino: use QOM cast instead of directly referencing parent_obj

[Mark Cave-Ayland]

Use a QOM cast in both dino_chip_read_with_attrs() and dino_chip_write_with_attrs()
instead of directly referencing parent_obj.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index d3cd8578a1..77b8089664 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -205,6 +205,7 @@ static MemTxResult dino_chip_read_with_attrs(void *opaque, hwaddr addr,
                                              MemTxAttrs attrs)
 {
     DinoState *s = opaque;
+    PCIHostState *phb = PCI_HOST_BRIDGE(s);
     MemTxResult ret = MEMTX_OK;
     AddressSpace *io;
     uint16_t ioaddr;
@@ -214,7 +215,7 @@ static MemTxResult dino_chip_read_with_attrs(void *opaque, hwaddr addr,
     case DINO_PCI_IO_DATA ... DINO_PCI_IO_DATA + 3:
         /* Read from PCI IO space. */
         io = &address_space_io;
-        ioaddr = s->parent_obj.config_reg + (addr & 3);
+        ioaddr = phb->config_reg + (addr & 3);
         switch (size) {
         case 1:
             val = address_space_ldub(io, ioaddr, attrs, &ret);
@@ -297,6 +298,7 @@ static MemTxResult dino_chip_write_with_attrs(void *opaque, hwaddr addr,
                                               MemTxAttrs attrs)
 {
     DinoState *s = opaque;
+    PCIHostState *phb = PCI_HOST_BRIDGE(s);
     AddressSpace *io;
     MemTxResult ret;
     uint16_t ioaddr;
@@ -308,7 +310,7 @@ static MemTxResult dino_chip_write_with_attrs(void *opaque, hwaddr addr,
     case DINO_IO_DATA ... DINO_PCI_IO_DATA + 3:
         /* Write into PCI IO space.  */
         io = &address_space_io;
-        ioaddr = s->parent_obj.config_reg + (addr & 3);
+        ioaddr = phb->config_reg + (addr & 3);
         switch (size) {
         case 1:
             address_space_stb(io, ioaddr, val, attrs, &ret);
-- 
2.20.1

[PATCH v2 10/50] dino: return PCIBus from dino_init() using qdev_get_child_bus()

[Mark Cave-Ayland]

This allows access to the PCI bus without having to reference parent_obj directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 77b8089664..d89b48493f 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -523,14 +523,12 @@ PCIBus *dino_init(MemoryRegion *addr_space,
 {
     DeviceState *dev;
     DinoState *s;
-    PCIBus *b;
+    PCIBus *pci_bus;
 
     dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
     object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
                              &error_fatal);
     s = DINO_PCI_HOST_BRIDGE(dev);
-
-    b = s->parent_obj.bus;
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     memory_region_add_subregion(addr_space, DINO_HPA,
@@ -539,7 +537,8 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
     *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
 
-    return b;
+    pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci"));
+    return pci_bus;
 }
 
 static void dino_pcihost_reset(DeviceState *dev)
-- 
2.20.1

[PATCH v2 11/50] dino: split declarations from dino.c into dino.h

[Mark Cave-Ayland]

This is to allow access to DinoState from outside dino.c. With the changes to
the headers it is now possible to remove the duplicate definition for
TYPE_DINO_PCI_HOST_BRIDGE from hppa_sys.h.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c     | 111 +--------------------------------------
 hw/hppa/dino.h     | 127 +++++++++++++++++++++++++++++++++++++++++++++
 hw/hppa/hppa_sys.h |   2 -
 3 files changed, 128 insertions(+), 112 deletions(-)
 create mode 100644 hw/hppa/dino.h

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index d89b48493f..01546ff6fc 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -18,122 +18,13 @@
 #include "hw/pci/pci.h"
 #include "hw/pci/pci_bus.h"
 #include "hw/qdev-properties.h"
+#include "dino.h"
 #include "migration/vmstate.h"
 #include "hppa_sys.h"
 #include "trace.h"
 #include "qom/object.h"
 
 
-#define TYPE_DINO_PCI_HOST_BRIDGE "dino-pcihost"
-
-#define DINO_IAR0               0x004
-#define DINO_IODC               0x008
-#define DINO_IRR0               0x00C  /* RO */
-#define DINO_IAR1               0x010
-#define DINO_IRR1               0x014  /* RO */
-#define DINO_IMR                0x018
-#define DINO_IPR                0x01C
-#define DINO_TOC_ADDR           0x020
-#define DINO_ICR                0x024
-#define DINO_ILR                0x028  /* RO */
-#define DINO_IO_COMMAND         0x030  /* WO */
-#define DINO_IO_STATUS          0x034  /* RO */
-#define DINO_IO_CONTROL         0x038
-#define DINO_IO_GSC_ERR_RESP    0x040  /* RO */
-#define DINO_IO_ERR_INFO        0x044  /* RO */
-#define DINO_IO_PCI_ERR_RESP    0x048  /* RO */
-#define DINO_IO_FBB_EN          0x05c
-#define DINO_IO_ADDR_EN         0x060
-#define DINO_PCI_CONFIG_ADDR    0x064
-#define DINO_PCI_CONFIG_DATA    0x068
-#define DINO_PCI_IO_DATA        0x06c
-#define DINO_PCI_MEM_DATA       0x070  /* Dino 3.x only */
-#define DINO_GSC2X_CONFIG       0x7b4  /* RO */
-#define DINO_GMASK              0x800
-#define DINO_PAMR               0x804
-#define DINO_PAPR               0x808
-#define DINO_DAMODE             0x80c
-#define DINO_PCICMD             0x810
-#define DINO_PCISTS             0x814  /* R/WC */
-#define DINO_MLTIM              0x81c
-#define DINO_BRDG_FEAT          0x820
-#define DINO_PCIROR             0x824
-#define DINO_PCIWOR             0x828
-#define DINO_TLTIM              0x830
-
-#define DINO_IRQS         11      /* bits 0-10 are architected */
-#define DINO_IRR_MASK     0x5ff   /* only 10 bits are implemented */
-#define DINO_LOCAL_IRQS   (DINO_IRQS + 1)
-#define DINO_MASK_IRQ(x)  (1 << (x))
-
-#define PCIINTA   0x001
-#define PCIINTB   0x002
-#define PCIINTC   0x004
-#define PCIINTD   0x008
-#define PCIINTE   0x010
-#define PCIINTF   0x020
-#define GSCEXTINT 0x040
-/* #define xxx       0x080 - bit 7 is "default" */
-/* #define xxx    0x100 - bit 8 not used */
-/* #define xxx    0x200 - bit 9 not used */
-#define RS232INT  0x400
-
-#define DINO_MEM_CHUNK_SIZE (8 * MiB)
-
-OBJECT_DECLARE_SIMPLE_TYPE(DinoState, DINO_PCI_HOST_BRIDGE)
-
-#define DINO800_REGS (1 + (DINO_TLTIM - DINO_GMASK) / 4)
-static const uint32_t reg800_keep_bits[DINO800_REGS] = {
-    MAKE_64BIT_MASK(0, 1),  /* GMASK */
-    MAKE_64BIT_MASK(0, 7),  /* PAMR */
-    MAKE_64BIT_MASK(0, 7),  /* PAPR */
-    MAKE_64BIT_MASK(0, 8),  /* DAMODE */
-    MAKE_64BIT_MASK(0, 7),  /* PCICMD */
-    MAKE_64BIT_MASK(0, 9),  /* PCISTS */
-    MAKE_64BIT_MASK(0, 32), /* Undefined */
-    MAKE_64BIT_MASK(0, 8),  /* MLTIM */
-    MAKE_64BIT_MASK(0, 30), /* BRDG_FEAT */
-    MAKE_64BIT_MASK(0, 24), /* PCIROR */
-    MAKE_64BIT_MASK(0, 22), /* PCIWOR */
-    MAKE_64BIT_MASK(0, 32), /* Undocumented */
-    MAKE_64BIT_MASK(0, 9),  /* TLTIM */
-};
-
-struct DinoState {
-    PCIHostState parent_obj;
-
-    /*
-     * PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
-     * so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops.
-     */
-    uint32_t config_reg_dino; /* keep original copy, including 2 lowest bits */
-
-    uint32_t iar0;
-    uint32_t iar1;
-    uint32_t imr;
-    uint32_t ipr;
-    uint32_t icr;
-    uint32_t ilr;
-    uint32_t io_fbb_en;
-    uint32_t io_addr_en;
-    uint32_t io_control;
-    uint32_t toc_addr;
-
-    uint32_t reg800[DINO800_REGS];
-
-    MemoryRegion this_mem;
-    MemoryRegion pci_mem;
-    MemoryRegion pci_mem_alias[32];
-
-    MemoryRegion *memory_as;
-
-    AddressSpace bm_as;
-    MemoryRegion bm;
-    MemoryRegion bm_ram_alias;
-    MemoryRegion bm_pci_alias;
-    MemoryRegion bm_cpu_alias;
-};
-
 /*
  * Dino can forward memory accesses from the CPU in the range between
  * 0xf0800000 and 0xff000000 to the PCI bus.
diff --git a/hw/hppa/dino.h b/hw/hppa/dino.h
new file mode 100644
index 0000000000..1a26667377
--- /dev/null
+++ b/hw/hppa/dino.h
@@ -0,0 +1,127 @@
+/*
+ * HP-PARISC Dino PCI chipset emulation, as in B160L and similiar machines
+ *
+ * (C) 2017-2019 by Helge Deller <deller@gmx.de>
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ * Documentation available at:
+ * https://parisc.wiki.kernel.org/images-parisc/9/91/Dino_ers.pdf
+ * https://parisc.wiki.kernel.org/images-parisc/7/70/Dino_3_1_Errata.pdf
+ */
+
+#ifndef DINO_H
+#define DINO_H
+
+#include "hw/pci/pci_host.h"
+
+#define TYPE_DINO_PCI_HOST_BRIDGE "dino-pcihost"
+OBJECT_DECLARE_SIMPLE_TYPE(DinoState, DINO_PCI_HOST_BRIDGE)
+
+#define DINO_IAR0               0x004
+#define DINO_IODC               0x008
+#define DINO_IRR0               0x00C  /* RO */
+#define DINO_IAR1               0x010
+#define DINO_IRR1               0x014  /* RO */
+#define DINO_IMR                0x018
+#define DINO_IPR                0x01C
+#define DINO_TOC_ADDR           0x020
+#define DINO_ICR                0x024
+#define DINO_ILR                0x028  /* RO */
+#define DINO_IO_COMMAND         0x030  /* WO */
+#define DINO_IO_STATUS          0x034  /* RO */
+#define DINO_IO_CONTROL         0x038
+#define DINO_IO_GSC_ERR_RESP    0x040  /* RO */
+#define DINO_IO_ERR_INFO        0x044  /* RO */
+#define DINO_IO_PCI_ERR_RESP    0x048  /* RO */
+#define DINO_IO_FBB_EN          0x05c
+#define DINO_IO_ADDR_EN         0x060
+#define DINO_PCI_CONFIG_ADDR    0x064
+#define DINO_PCI_CONFIG_DATA    0x068
+#define DINO_PCI_IO_DATA        0x06c
+#define DINO_PCI_MEM_DATA       0x070  /* Dino 3.x only */
+#define DINO_GSC2X_CONFIG       0x7b4  /* RO */
+#define DINO_GMASK              0x800
+#define DINO_PAMR               0x804
+#define DINO_PAPR               0x808
+#define DINO_DAMODE             0x80c
+#define DINO_PCICMD             0x810
+#define DINO_PCISTS             0x814  /* R/WC */
+#define DINO_MLTIM              0x81c
+#define DINO_BRDG_FEAT          0x820
+#define DINO_PCIROR             0x824
+#define DINO_PCIWOR             0x828
+#define DINO_TLTIM              0x830
+
+#define DINO_IRQS         11      /* bits 0-10 are architected */
+#define DINO_IRR_MASK     0x5ff   /* only 10 bits are implemented */
+#define DINO_LOCAL_IRQS   (DINO_IRQS + 1)
+#define DINO_MASK_IRQ(x)  (1 << (x))
+
+#define PCIINTA   0x001
+#define PCIINTB   0x002
+#define PCIINTC   0x004
+#define PCIINTD   0x008
+#define PCIINTE   0x010
+#define PCIINTF   0x020
+#define GSCEXTINT 0x040
+/* #define xxx       0x080 - bit 7 is "default" */
+/* #define xxx    0x100 - bit 8 not used */
+/* #define xxx    0x200 - bit 9 not used */
+#define RS232INT  0x400
+
+#define DINO_MEM_CHUNK_SIZE (8 * MiB)
+
+#define DINO800_REGS (1 + (DINO_TLTIM - DINO_GMASK) / 4)
+static const uint32_t reg800_keep_bits[DINO800_REGS] = {
+    MAKE_64BIT_MASK(0, 1),  /* GMASK */
+    MAKE_64BIT_MASK(0, 7),  /* PAMR */
+    MAKE_64BIT_MASK(0, 7),  /* PAPR */
+    MAKE_64BIT_MASK(0, 8),  /* DAMODE */
+    MAKE_64BIT_MASK(0, 7),  /* PCICMD */
+    MAKE_64BIT_MASK(0, 9),  /* PCISTS */
+    MAKE_64BIT_MASK(0, 32), /* Undefined */
+    MAKE_64BIT_MASK(0, 8),  /* MLTIM */
+    MAKE_64BIT_MASK(0, 30), /* BRDG_FEAT */
+    MAKE_64BIT_MASK(0, 24), /* PCIROR */
+    MAKE_64BIT_MASK(0, 22), /* PCIWOR */
+    MAKE_64BIT_MASK(0, 32), /* Undocumented */
+    MAKE_64BIT_MASK(0, 9),  /* TLTIM */
+};
+
+struct DinoState {
+    PCIHostState parent_obj;
+
+    /*
+     * PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
+     * so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops.
+     */
+    uint32_t config_reg_dino; /* keep original copy, including 2 lowest bits */
+
+    uint32_t iar0;
+    uint32_t iar1;
+    uint32_t imr;
+    uint32_t ipr;
+    uint32_t icr;
+    uint32_t ilr;
+    uint32_t io_fbb_en;
+    uint32_t io_addr_en;
+    uint32_t io_control;
+    uint32_t toc_addr;
+
+    uint32_t reg800[DINO800_REGS];
+
+    MemoryRegion this_mem;
+    MemoryRegion pci_mem;
+    MemoryRegion pci_mem_alias[32];
+
+    MemoryRegion *memory_as;
+
+    AddressSpace bm_as;
+    MemoryRegion bm;
+    MemoryRegion bm_ram_alias;
+    MemoryRegion bm_pci_alias;
+    MemoryRegion bm_cpu_alias;
+};
+
+#endif
diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 0b18271cc9..9d8b28ec01 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -14,8 +14,6 @@ PCIBus *dino_init(MemoryRegion *, qemu_irq *, qemu_irq *);
 DeviceState *lasi_init(MemoryRegion *);
 #define enable_lasi_lan()       0
 
-#define TYPE_DINO_PCI_HOST_BRIDGE "dino-pcihost"
-
 /* hppa_pci.c.  */
 extern const MemoryRegionOps hppa_pci_ignore_ops;
 extern const MemoryRegionOps hppa_pci_conf1_ops;
-- 
2.20.1

[PATCH v2 12/50] hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa machine

[Mark Cave-Ayland]

DINO refers to the GSC-PCI bridge device which will soon be handled separately,
however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated
by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU
MAINTAINERS file.

Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO
and also update the machine description accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 configs/devices/hppa-softmmu/default.mak | 2 +-
 hw/hppa/Kconfig                          | 2 +-
 hw/hppa/machine.c                        | 2 +-
 hw/hppa/meson.build                      | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/configs/devices/hppa-softmmu/default.mak b/configs/devices/hppa-softmmu/default.mak
index b64c5eb3ff..b0364bb88f 100644
--- a/configs/devices/hppa-softmmu/default.mak
+++ b/configs/devices/hppa-softmmu/default.mak
@@ -6,4 +6,4 @@
 
 # Boards:
 #
-CONFIG_DINO=y
+CONFIG_HPPA_B160L=y
diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig
index 22948db025..8d64ead217 100644
--- a/hw/hppa/Kconfig
+++ b/hw/hppa/Kconfig
@@ -1,4 +1,4 @@
-config DINO
+config HPPA_B160L
     bool
     imply PCI_DEVICES
     imply E1000_PCI
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index f7595c0857..971d7ffcfe 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -366,7 +366,7 @@ static void hppa_nmi(NMIState *n, int cpu_index, Error **errp)
 
 static void machine_hppa_machine_init(MachineClass *mc)
 {
-    mc->desc = "HPPA generic machine";
+    mc->desc = "HPPA B160L machine";
     mc->default_cpu_type = TYPE_HPPA_CPU;
     mc->init = machine_hppa_init;
     mc->reset = hppa_machine_reset;
diff --git a/hw/hppa/meson.build b/hw/hppa/meson.build
index 1deae83aee..32072bf204 100644
--- a/hw/hppa/meson.build
+++ b/hw/hppa/meson.build
@@ -1,4 +1,4 @@
 hppa_ss = ss.source_set()
-hppa_ss.add(when: 'CONFIG_DINO', if_true: files('pci.c', 'machine.c', 'dino.c', 'lasi.c'))
+hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('pci.c', 'machine.c', 'dino.c', 'lasi.c'))
 
 hw_arch += {'hppa': hppa_ss}
-- 
2.20.1

[PATCH v2 13/50] dino: change dino_init() to return the DINO device instead of PCIBus

[Mark Cave-Ayland]

This is in preparation for using more qdev APIs during the configuration of the
HPPA generic machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c     | 8 +++-----
 hw/hppa/hppa_sys.h | 3 ++-
 hw/hppa/machine.c  | 6 ++++--
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 01546ff6fc..6c488c908e 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -409,12 +409,11 @@ static void dino_set_serial_irq(void *opaque, int irq, int level)
     dino_set_irq(opaque, 10, level);
 }
 
-PCIBus *dino_init(MemoryRegion *addr_space,
-                  qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
+DinoState *dino_init(MemoryRegion *addr_space,
+                     qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
 {
     DeviceState *dev;
     DinoState *s;
-    PCIBus *pci_bus;
 
     dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
     object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
@@ -428,8 +427,7 @@ PCIBus *dino_init(MemoryRegion *addr_space,
     *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
     *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
 
-    pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci"));
-    return pci_bus;
+    return s;
 }
 
 static void dino_pcihost_reset(DeviceState *dev)
diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 9d8b28ec01..88773d2c35 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -9,8 +9,9 @@
 #include "hw/intc/i8259.h"
 
 #include "hppa_hardware.h"
+#include "dino.h"
 
-PCIBus *dino_init(MemoryRegion *, qemu_irq *, qemu_irq *);
+DinoState *dino_init(MemoryRegion *, qemu_irq *, qemu_irq *);
 DeviceState *lasi_init(MemoryRegion *);
 #define enable_lasi_lan()       0
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 971d7ffcfe..94bc1b202a 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -17,6 +17,7 @@
 #include "hw/char/serial.h"
 #include "hw/net/lasi_82596.h"
 #include "hw/nmi.h"
+#include "dino.h"
 #include "hppa_sys.h"
 #include "qemu/units.h"
 #include "qapi/error.h"
@@ -126,7 +127,7 @@ static void machine_hppa_init(MachineState *machine)
     const char *kernel_filename = machine->kernel_filename;
     const char *kernel_cmdline = machine->kernel_cmdline;
     const char *initrd_filename = machine->initrd_filename;
-    DeviceState *dev;
+    DeviceState *dev, *dino_dev;
     PCIBus *pci_bus;
     ISABus *isa_bus;
     qemu_irq rtc_irq, serial_irq;
@@ -166,7 +167,8 @@ static void machine_hppa_init(MachineState *machine)
     lasi_init(addr_space);
 
     /* Init Dino (PCI host bus chip).  */
-    pci_bus = dino_init(addr_space, &rtc_irq, &serial_irq);
+    dino_dev = DEVICE(dino_init(addr_space, &rtc_irq, &serial_irq));
+    pci_bus = PCI_BUS(qdev_get_child_bus(dino_dev, "pci"));
     assert(pci_bus);
 
     /* Create ISA bus. */
-- 
2.20.1

[PATCH v2 14/50] machine.c: map DINO device during board configuration

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c    | 3 ---
 hw/hppa/machine.c | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 6c488c908e..82f301653b 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -421,9 +421,6 @@ DinoState *dino_init(MemoryRegion *addr_space,
     s = DINO_PCI_HOST_BRIDGE(dev);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
-    memory_region_add_subregion(addr_space, DINO_HPA,
-                                sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0));
-
     *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
     *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 94bc1b202a..5a490a9c37 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -168,6 +168,9 @@ static void machine_hppa_init(MachineState *machine)
 
     /* Init Dino (PCI host bus chip).  */
     dino_dev = DEVICE(dino_init(addr_space, &rtc_irq, &serial_irq));
+    memory_region_add_subregion(addr_space, DINO_HPA,
+                                sysbus_mmio_get_region(
+                                    SYS_BUS_DEVICE(dino_dev), 0));
     pci_bus = PCI_BUS(qdev_get_child_bus(dino_dev, "pci"));
     assert(pci_bus);
 
-- 
2.20.1

[PATCH v2 15/50] dino.h: add defines for DINO IRQ numbers

[Mark Cave-Ayland]

This is to allow the DINO IRQs to be defined as qdev GPIOs.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/hw/hppa/dino.h b/hw/hppa/dino.h
index 1a26667377..70fb8c52c8 100644
--- a/hw/hppa/dino.h
+++ b/hw/hppa/dino.h
@@ -58,6 +58,18 @@ OBJECT_DECLARE_SIMPLE_TYPE(DinoState, DINO_PCI_HOST_BRIDGE)
 #define DINO_LOCAL_IRQS   (DINO_IRQS + 1)
 #define DINO_MASK_IRQ(x)  (1 << (x))
 
+#define DINO_IRQ_PCIINTA   0
+#define DINO_IRQ_PCIINTB   1
+#define DINO_IRQ_PCIINTC   2
+#define DINO_IRQ_PCIINTD   3
+#define DINO_IRQ_PCIINTE   4
+#define DINO_IRQ_PCIINTF   5
+#define DINO_IRQ_GSCEXTINT 6
+#define DINO_IRQ_BUSERRINT 7
+#define DINO_IRQ_PS2INT    8
+#define DINO_IRQ_UNUSED    9
+#define DINO_IRQ_RS232INT  10
+
 #define PCIINTA   0x001
 #define PCIINTB   0x002
 #define PCIINTC   0x004
-- 
2.20.1

[PATCH v2 16/50] dino: define IRQ inputs as qdev GPIOs

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 2 ++
 hw/hppa/dino.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 82f301653b..f58aebf94d 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -513,6 +513,8 @@ static void dino_pcihost_init(Object *obj)
     pci_setup_iommu(phb->bus, dino_pcihost_set_iommu, s);
 
     sysbus_init_mmio(sbd, &s->this_mem);
+
+    qdev_init_gpio_in(DEVICE(obj), dino_set_irq, DINO_IRQS);
 }
 
 static Property dino_pcihost_properties[] = {
diff --git a/hw/hppa/dino.h b/hw/hppa/dino.h
index 70fb8c52c8..ca380515f2 100644
--- a/hw/hppa/dino.h
+++ b/hw/hppa/dino.h
@@ -134,6 +134,8 @@ struct DinoState {
     MemoryRegion bm_ram_alias;
     MemoryRegion bm_pci_alias;
     MemoryRegion bm_cpu_alias;
+
+    qemu_irq irqs[DINO_IRQS];
 };
 
 #endif
-- 
2.20.1

[PATCH v2 17/50] dino: wire up serial IRQ using a qdev GPIO in machine.c

[Mark Cave-Ayland]

This makes it unnecessary to allocate a separate IRQ for the serial port.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c     | 8 +-------
 hw/hppa/hppa_sys.h | 2 +-
 hw/hppa/machine.c  | 7 ++++---
 3 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index f58aebf94d..80ffe27188 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -404,13 +404,8 @@ static void dino_set_timer_irq(void *opaque, int irq, int level)
     /* ??? Not connected.  */
 }
 
-static void dino_set_serial_irq(void *opaque, int irq, int level)
-{
-    dino_set_irq(opaque, 10, level);
-}
-
 DinoState *dino_init(MemoryRegion *addr_space,
-                     qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
+                     qemu_irq *p_rtc_irq)
 {
     DeviceState *dev;
     DinoState *s;
@@ -422,7 +417,6 @@ DinoState *dino_init(MemoryRegion *addr_space,
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
-    *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
 
     return s;
 }
diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 88773d2c35..c238e7ebc8 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -11,7 +11,7 @@
 #include "hppa_hardware.h"
 #include "dino.h"
 
-DinoState *dino_init(MemoryRegion *, qemu_irq *, qemu_irq *);
+DinoState *dino_init(MemoryRegion *, qemu_irq *);
 DeviceState *lasi_init(MemoryRegion *);
 #define enable_lasi_lan()       0
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 5a490a9c37..f757aecda0 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -130,7 +130,7 @@ static void machine_hppa_init(MachineState *machine)
     DeviceState *dev, *dino_dev;
     PCIBus *pci_bus;
     ISABus *isa_bus;
-    qemu_irq rtc_irq, serial_irq;
+    qemu_irq rtc_irq;
     char *firmware_filename;
     uint64_t firmware_low, firmware_high;
     long size;
@@ -167,7 +167,7 @@ static void machine_hppa_init(MachineState *machine)
     lasi_init(addr_space);
 
     /* Init Dino (PCI host bus chip).  */
-    dino_dev = DEVICE(dino_init(addr_space, &rtc_irq, &serial_irq));
+    dino_dev = DEVICE(dino_init(addr_space, &rtc_irq));
     memory_region_add_subregion(addr_space, DINO_HPA,
                                 sysbus_mmio_get_region(
                                     SYS_BUS_DEVICE(dino_dev), 0));
@@ -184,7 +184,8 @@ static void machine_hppa_init(MachineState *machine)
     /* Serial code setup.  */
     if (serial_hd(0)) {
         uint32_t addr = DINO_UART_HPA + 0x800;
-        serial_mm_init(addr_space, addr, 0, serial_irq,
+        serial_mm_init(addr_space, addr, 0,
+                       qdev_get_gpio_in(dino_dev, DINO_IRQ_RS232INT),
                        115200, serial_hd(0), DEVICE_BIG_ENDIAN);
     }
 
-- 
2.20.1

[PATCH v2 18/50] dino: remove unused dino_set_timer_irq() IRQ handler

[Mark Cave-Ayland]

According to the comments in dino.c the timer IRQ is unused, so remove the empty
dino_set_timer_irq() handler function and simply pass NULL to mc146818_rtc_init()
in machine.c instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c     | 10 +---------
 hw/hppa/hppa_sys.h |  2 +-
 hw/hppa/machine.c  |  5 ++---
 3 files changed, 4 insertions(+), 13 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 80ffe27188..d8baf139d6 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -399,13 +399,7 @@ static int dino_pci_map_irq(PCIDevice *d, int irq_num)
     return slot & 0x03;
 }
 
-static void dino_set_timer_irq(void *opaque, int irq, int level)
-{
-    /* ??? Not connected.  */
-}
-
-DinoState *dino_init(MemoryRegion *addr_space,
-                     qemu_irq *p_rtc_irq)
+DinoState *dino_init(MemoryRegion *addr_space)
 {
     DeviceState *dev;
     DinoState *s;
@@ -416,8 +410,6 @@ DinoState *dino_init(MemoryRegion *addr_space,
     s = DINO_PCI_HOST_BRIDGE(dev);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
-    *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
-
     return s;
 }
 
diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index c238e7ebc8..ebedecf1c8 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -11,7 +11,7 @@
 #include "hppa_hardware.h"
 #include "dino.h"
 
-DinoState *dino_init(MemoryRegion *, qemu_irq *);
+DinoState *dino_init(MemoryRegion *);
 DeviceState *lasi_init(MemoryRegion *);
 #define enable_lasi_lan()       0
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index f757aecda0..49ecb971be 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -130,7 +130,6 @@ static void machine_hppa_init(MachineState *machine)
     DeviceState *dev, *dino_dev;
     PCIBus *pci_bus;
     ISABus *isa_bus;
-    qemu_irq rtc_irq;
     char *firmware_filename;
     uint64_t firmware_low, firmware_high;
     long size;
@@ -167,7 +166,7 @@ static void machine_hppa_init(MachineState *machine)
     lasi_init(addr_space);
 
     /* Init Dino (PCI host bus chip).  */
-    dino_dev = DEVICE(dino_init(addr_space, &rtc_irq));
+    dino_dev = DEVICE(dino_init(addr_space));
     memory_region_add_subregion(addr_space, DINO_HPA,
                                 sysbus_mmio_get_region(
                                     SYS_BUS_DEVICE(dino_dev), 0));
@@ -179,7 +178,7 @@ static void machine_hppa_init(MachineState *machine)
     assert(isa_bus);
 
     /* Realtime clock, used by firmware for PDC_TOD call. */
-    mc146818_rtc_init(isa_bus, 2000, rtc_irq);
+    mc146818_rtc_init(isa_bus, 2000, NULL);
 
     /* Serial code setup.  */
     if (serial_hd(0)) {
-- 
2.20.1

[PATCH v2 19/50] hppa: move dino_init() from dino.c to machine.c

[Mark Cave-Ayland]

Now that dino_init() is completely decoupled from dino.c it can be moved to
machine.c with the rest of the board configuration.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c     | 14 --------------
 hw/hppa/hppa_sys.h |  2 --
 hw/hppa/machine.c  | 12 ++++++++++++
 3 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index d8baf139d6..6d12c385aa 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -399,20 +399,6 @@ static int dino_pci_map_irq(PCIDevice *d, int irq_num)
     return slot & 0x03;
 }
 
-DinoState *dino_init(MemoryRegion *addr_space)
-{
-    DeviceState *dev;
-    DinoState *s;
-
-    dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
-    object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
-                             &error_fatal);
-    s = DINO_PCI_HOST_BRIDGE(dev);
-    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-
-    return s;
-}
-
 static void dino_pcihost_reset(DeviceState *dev)
 {
     DinoState *s = DINO_PCI_HOST_BRIDGE(dev);
diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index ebedecf1c8..7c31dd8396 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -9,9 +9,7 @@
 #include "hw/intc/i8259.h"
 
 #include "hppa_hardware.h"
-#include "dino.h"
 
-DinoState *dino_init(MemoryRegion *);
 DeviceState *lasi_init(MemoryRegion *);
 #define enable_lasi_lan()       0
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 49ecb971be..4b753fa346 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -122,6 +122,18 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
     return fw_cfg;
 }
 
+static DinoState *dino_init(MemoryRegion *addr_space)
+{
+    DeviceState *dev;
+
+    dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
+    object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
+                             &error_fatal);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+
+    return DINO_PCI_HOST_BRIDGE(dev);
+}
+
 static void machine_hppa_init(MachineState *machine)
 {
     const char *kernel_filename = machine->kernel_filename;
-- 
2.20.1

[PATCH v2 20/50] dino: use numerical constant for iar0 and iar1 reset values

[Mark Cave-Ayland]

This is to allow us to decouple the DINO device from the board logic. The choice
of using a hard-coded constant (along with a comment) is to match how this is
already done for toc_addr. If it is decided later that these values need to be
configurable then they can easily be converted to qdev properties.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index 6d12c385aa..aa7f812e22 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -403,7 +403,7 @@ static void dino_pcihost_reset(DeviceState *dev)
 {
     DinoState *s = DINO_PCI_HOST_BRIDGE(dev);
 
-    s->iar0 = s->iar1 = CPU_HPA + 3;
+    s->iar0 = s->iar1 = 0xFFFB0000 + 3; /* CPU_HPA + 3 */
     s->toc_addr = 0xFFFA0030; /* IO_COMMAND of CPU */
 }
 
-- 
2.20.1

[PATCH v2 21/50] dino: move DINO HPA constants from hppa_hardware.h to dino.h

[Mark Cave-Ayland]

This is to allow us to decouple the DINO device from the board logic.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/dino.h          | 5 +++++
 hw/hppa/hppa_hardware.h | 5 -----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/hw/hppa/dino.h b/hw/hppa/dino.h
index ca380515f2..a1b0184940 100644
--- a/hw/hppa/dino.h
+++ b/hw/hppa/dino.h
@@ -101,6 +101,11 @@ static const uint32_t reg800_keep_bits[DINO800_REGS] = {
     MAKE_64BIT_MASK(0, 9),  /* TLTIM */
 };
 
+/* offsets to DINO HPA: */
+#define DINO_PCI_ADDR           0x064
+#define DINO_CONFIG_DATA        0x068
+#define DINO_IO_DATA            0x06c
+
 struct DinoState {
     PCIHostState parent_obj;
 
diff --git a/hw/hppa/hppa_hardware.h b/hw/hppa/hppa_hardware.h
index 5edf577563..8b6b9222cb 100644
--- a/hw/hppa/hppa_hardware.h
+++ b/hw/hppa/hppa_hardware.h
@@ -30,11 +30,6 @@
 #define PCI_HPA         DINO_HPA        /* PCI bus */
 #define IDE_HPA         0xf9000000      /* Boot disc controller */
 
-/* offsets to DINO HPA: */
-#define DINO_PCI_ADDR           0x064
-#define DINO_CONFIG_DATA        0x068
-#define DINO_IO_DATA            0x06c
-
 #define PORT_PCI_CMD    (PCI_HPA + DINO_PCI_ADDR)
 #define PORT_PCI_DATA   (PCI_HPA + DINO_CONFIG_DATA)
 
-- 
2.20.1

[PATCH v2 22/50] dino: move from hw/hppa to hw/pci-host

[Mark Cave-Ayland]

Move the DINO device implementation from hw/hppa to hw/pci-host so that it is
located with all the other PCI host bridges.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 MAINTAINERS                             | 2 ++
 hw/hppa/Kconfig                         | 2 +-
 hw/hppa/machine.c                       | 2 +-
 hw/hppa/meson.build                     | 2 +-
 hw/hppa/trace-events                    | 5 -----
 hw/pci-host/Kconfig                     | 4 ++++
 hw/{hppa => pci-host}/dino.c            | 3 +--
 hw/pci-host/meson.build                 | 3 +++
 hw/pci-host/trace-events                | 5 +++++
 {hw/hppa => include/hw/pci-host}/dino.h | 0
 10 files changed, 18 insertions(+), 10 deletions(-)
 rename hw/{hppa => pci-host}/dino.c (99%)
 rename {hw/hppa => include/hw/pci-host}/dino.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 294c88ace9..07f85829b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1114,7 +1114,9 @@ S: Odd Fixes
 F: configs/devices/hppa-softmmu/default.mak
 F: hw/hppa/
 F: hw/net/*i82596*
+F: hw/pci-host/dino.c
 F: include/hw/net/lasi_82596.h
+F: include/hw/pci-host/dino.h
 F: pc-bios/hppa-firmware.img
 
 M68K Machines
diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig
index 8d64ead217..724380ecec 100644
--- a/hw/hppa/Kconfig
+++ b/hw/hppa/Kconfig
@@ -3,7 +3,7 @@ config HPPA_B160L
     imply PCI_DEVICES
     imply E1000_PCI
     imply VIRTIO_VGA
-    select PCI
+    select DINO
     select SERIAL
     select ISA_BUS
     select I8259
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 4b753fa346..c847febe5d 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -17,7 +17,7 @@
 #include "hw/char/serial.h"
 #include "hw/net/lasi_82596.h"
 #include "hw/nmi.h"
-#include "dino.h"
+#include "hw/pci-host/dino.h"
 #include "hppa_sys.h"
 #include "qemu/units.h"
 #include "qapi/error.h"
diff --git a/hw/hppa/meson.build b/hw/hppa/meson.build
index 32072bf204..a6f9db455c 100644
--- a/hw/hppa/meson.build
+++ b/hw/hppa/meson.build
@@ -1,4 +1,4 @@
 hppa_ss = ss.source_set()
-hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('pci.c', 'machine.c', 'dino.c', 'lasi.c'))
+hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('pci.c', 'machine.c', 'lasi.c'))
 
 hw_arch += {'hppa': hppa_ss}
diff --git a/hw/hppa/trace-events b/hw/hppa/trace-events
index 3f42be9056..871a473771 100644
--- a/hw/hppa/trace-events
+++ b/hw/hppa/trace-events
@@ -3,11 +3,6 @@
 # pci.c
 hppa_pci_iack_write(void) ""
 
-# dino.c
-dino_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
-dino_chip_read(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
-dino_chip_write(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
-
 # lasi.c
 lasi_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
 lasi_chip_read(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 2b5f7d58cc..38fd2ee8f3 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -77,3 +77,7 @@ config MV64361
     bool
     select PCI
     select I8259
+
+config DINO
+    bool
+    select PCI
diff --git a/hw/hppa/dino.c b/hw/pci-host/dino.c
similarity index 99%
rename from hw/hppa/dino.c
rename to hw/pci-host/dino.c
index aa7f812e22..f257c24e64 100644
--- a/hw/hppa/dino.c
+++ b/hw/pci-host/dino.c
@@ -18,9 +18,8 @@
 #include "hw/pci/pci.h"
 #include "hw/pci/pci_bus.h"
 #include "hw/qdev-properties.h"
-#include "dino.h"
+#include "hw/pci-host/dino.h"
 #include "migration/vmstate.h"
-#include "hppa_sys.h"
 #include "trace.h"
 #include "qom/object.h"
 
diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
index 4c4f39c15c..c07596d0d1 100644
--- a/hw/pci-host/meson.build
+++ b/hw/pci-host/meson.build
@@ -25,6 +25,9 @@ pci_ss.add(when: 'CONFIG_MV64361', if_true: files('mv64361.c'))
 # ARM devices
 pci_ss.add(when: 'CONFIG_VERSATILE_PCI', if_true: files('versatile.c'))
 
+# HPPA devices
+pci_ss.add(when: 'CONFIG_DINO', if_true: files('dino.c'))
+
 softmmu_ss.add_all(when: 'CONFIG_PCI', if_true: pci_ss)
 
 specific_ss.add(when: 'CONFIG_PCI_POWERNV', if_true: files(
diff --git a/hw/pci-host/trace-events b/hw/pci-host/trace-events
index 6e5d8d3355..437e66ff50 100644
--- a/hw/pci-host/trace-events
+++ b/hw/pci-host/trace-events
@@ -34,3 +34,8 @@ unin_read(uint64_t addr, uint64_t value) "addr=0x%" PRIx64 " val=0x%"PRIx64
 pnv_phb4_xive_notify(uint64_t notif_port, uint64_t data) "notif=@0x%"PRIx64" data=0x%"PRIx64
 pnv_phb4_xive_notify_ic(uint64_t addr, uint64_t data) "addr=@0x%"PRIx64" data=0x%"PRIx64
 pnv_phb4_xive_notify_abt(uint64_t notif_port, uint64_t data) "notif=@0x%"PRIx64" data=0x%"PRIx64
+
+# dino.c
+dino_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
+dino_chip_read(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
+dino_chip_write(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
diff --git a/hw/hppa/dino.h b/include/hw/pci-host/dino.h
similarity index 100%
rename from hw/hppa/dino.h
rename to include/hw/pci-host/dino.h
-- 
2.20.1

[PATCH v2 23/50] lasi: checkpatch fixes

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 88c3791eb6..3b77fba1c6 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -169,10 +169,11 @@ static MemTxResult lasi_chip_write_with_attrs(void *opaque, hwaddr addr,
         break;
     case LASI_IMR:
         s->imr = val;
-        if (((val & LASI_IRQ_BITS) != val) && (val != 0xffffffff))
+        if (((val & LASI_IRQ_BITS) != val) && (val != 0xffffffff)) {
             qemu_log_mask(LOG_GUEST_ERROR,
                 "LASI: tried to set invalid %lx IMR value.\n",
                 (unsigned long) val);
+        }
         break;
     case LASI_IPR:
         /* Any write to IPR clears the register. */
@@ -200,8 +201,9 @@ static MemTxResult lasi_chip_write_with_attrs(void *opaque, hwaddr addr,
         break;
 
     case LASI_PCR:
-        if (val == 0x02) /* immediately power off */
+        if (val == 0x02) { /* immediately power off */
             qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+        }
         break;
     case LASI_ERRLOG:
         s->errlog = val;
-- 
2.20.1

[PATCH v2 24/50] lasi: move memory region initialisation to new lasi_init() function

[Mark Cave-Ayland]

Create a new lasi_init() instance initialisation function and move the LASI
memory region initialisation into it. Rename the existing lasi_init() function
to lasi_initfn() for now.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h |  2 +-
 hw/hppa/lasi.c     | 13 ++++++++++---
 hw/hppa/machine.c  |  2 +-
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 7c31dd8396..0929dedded 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -10,7 +10,7 @@
 
 #include "hppa_hardware.h"
 
-DeviceState *lasi_init(MemoryRegion *);
+DeviceState *lasi_initfn(MemoryRegion *);
 #define enable_lasi_lan()       0
 
 /* hppa_pci.c.  */
diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 3b77fba1c6..c028b7786e 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -296,7 +296,7 @@ static int lasi_get_irq(unsigned long hpa)
     }
 }
 
-DeviceState *lasi_init(MemoryRegion *address_space)
+DeviceState *lasi_initfn(MemoryRegion *address_space)
 {
     DeviceState *dev;
     LasiState *s;
@@ -306,8 +306,6 @@ DeviceState *lasi_init(MemoryRegion *address_space)
     s->iar = CPU_HPA + 3;
 
     /* Lasi access from main memory.  */
-    memory_region_init_io(&s->this_mem, OBJECT(s), &lasi_chip_ops,
-                          s, "lasi", 0x100000);
     memory_region_add_subregion(address_space, LASI_HPA, &s->this_mem);
 
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
@@ -347,6 +345,14 @@ DeviceState *lasi_init(MemoryRegion *address_space)
     return dev;
 }
 
+static void lasi_init(Object *obj)
+{
+    LasiState *s = LASI_CHIP(obj);
+
+    memory_region_init_io(&s->this_mem, OBJECT(s), &lasi_chip_ops,
+                          s, "lasi", 0x100000);
+}
+
 static void lasi_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -357,6 +363,7 @@ static void lasi_class_init(ObjectClass *klass, void *data)
 static const TypeInfo lasi_pcihost_info = {
     .name          = TYPE_LASI_CHIP,
     .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_init = lasi_init,
     .instance_size = sizeof(LasiState),
     .class_init    = lasi_class_init,
 };
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index c847febe5d..2fa55de549 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -175,7 +175,7 @@ static void machine_hppa_init(MachineState *machine)
 
 
     /* Init Lasi chip */
-    lasi_init(addr_space);
+    lasi_initfn(addr_space);
 
     /* Init Dino (PCI host bus chip).  */
     dino_dev = DEVICE(dino_init(addr_space));
-- 
2.20.1

[PATCH v2 25/50] lasi: move register memory mapping from lasi.c to machine.c

[Mark Cave-Ayland]

The device register should be mapped directly by the board code.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c    | 7 +++----
 hw/hppa/machine.c | 7 +++++--
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index c028b7786e..08ebe7c6d9 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -304,10 +304,6 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
     dev = qdev_new(TYPE_LASI_CHIP);
     s = LASI_CHIP(dev);
     s->iar = CPU_HPA + 3;
-
-    /* Lasi access from main memory.  */
-    memory_region_add_subregion(address_space, LASI_HPA, &s->this_mem);
-
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     /* LAN */
@@ -348,9 +344,12 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
 static void lasi_init(Object *obj)
 {
     LasiState *s = LASI_CHIP(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 
     memory_region_init_io(&s->this_mem, OBJECT(s), &lasi_chip_ops,
                           s, "lasi", 0x100000);
+
+    sysbus_init_mmio(sbd, &s->this_mem);
 }
 
 static void lasi_class_init(ObjectClass *klass, void *data)
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 2fa55de549..6618bce435 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -139,7 +139,7 @@ static void machine_hppa_init(MachineState *machine)
     const char *kernel_filename = machine->kernel_filename;
     const char *kernel_cmdline = machine->kernel_cmdline;
     const char *initrd_filename = machine->initrd_filename;
-    DeviceState *dev, *dino_dev;
+    DeviceState *dev, *dino_dev, *lasi_dev;
     PCIBus *pci_bus;
     ISABus *isa_bus;
     char *firmware_filename;
@@ -175,7 +175,10 @@ static void machine_hppa_init(MachineState *machine)
 
 
     /* Init Lasi chip */
-    lasi_initfn(addr_space);
+    lasi_dev = lasi_initfn(addr_space);
+    memory_region_add_subregion(addr_space, LASI_HPA,
+                                sysbus_mmio_get_region(
+                                    SYS_BUS_DEVICE(lasi_dev), 0));
 
     /* Init Dino (PCI host bus chip).  */
     dino_dev = DEVICE(dino_init(addr_space));
-- 
2.20.1

[PATCH v2 26/50] lasi: move initialisation of iar and rtc to new lasi_reset() function

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 08ebe7c6d9..242713c7bd 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -303,7 +303,6 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
 
     dev = qdev_new(TYPE_LASI_CHIP);
     s = LASI_CHIP(dev);
-    s->iar = CPU_HPA + 3;
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     /* LAN */
@@ -319,11 +318,6 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
     parallel_mm_init(address_space, LASI_LPT_HPA + 0x800, 0,
                      lpt_irq, parallel_hds[0]);
 
-    /* Real time clock (RTC), it's only one 32-bit counter @9000 */
-
-    s->rtc = time(NULL);
-    s->rtc_ref = 0;
-
     if (serial_hd(1)) {
         /* Serial port */
         qemu_irq serial_irq = qemu_allocate_irq(lasi_set_irq, s,
@@ -341,6 +335,17 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
     return dev;
 }
 
+static void lasi_reset(DeviceState *dev)
+{
+    LasiState *s = LASI_CHIP(dev);
+
+    s->iar = CPU_HPA + 3;
+
+    /* Real time clock (RTC), it's only one 32-bit counter @9000 */
+    s->rtc = time(NULL);
+    s->rtc_ref = 0;
+}
+
 static void lasi_init(Object *obj)
 {
     LasiState *s = LASI_CHIP(obj);
@@ -356,6 +361,7 @@ static void lasi_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    dc->reset = lasi_reset;
     dc->vmsd = &vmstate_lasi;
 }
 
-- 
2.20.1

[PATCH v2 27/50] lasi: move LASIState and associated QOM structures to lasi.h

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 44 +-------------------------------------
 hw/hppa/lasi.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 43 deletions(-)
 create mode 100644 hw/hppa/lasi.h

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 242713c7bd..c1dfd5310f 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -24,50 +24,8 @@
 #include "hw/input/lasips2.h"
 #include "migration/vmstate.h"
 #include "qom/object.h"
+#include "lasi.h"
 
-#define TYPE_LASI_CHIP "lasi-chip"
-
-#define LASI_IRR        0x00    /* RO */
-#define LASI_IMR        0x04
-#define LASI_IPR        0x08
-#define LASI_ICR        0x0c
-#define LASI_IAR        0x10
-
-#define LASI_PCR        0x0C000 /* LASI Power Control register */
-#define LASI_ERRLOG     0x0C004 /* LASI Error Logging register */
-#define LASI_VER        0x0C008 /* LASI Version Control register */
-#define LASI_IORESET    0x0C00C /* LASI I/O Reset register */
-#define LASI_AMR        0x0C010 /* LASI Arbitration Mask register */
-#define LASI_IO_CONF    0x7FFFE /* LASI primary configuration register */
-#define LASI_IO_CONF2   0x7FFFF /* LASI secondary configuration register */
-
-#define LASI_BIT(x)     (1ul << (x))
-#define LASI_IRQ_BITS   (LASI_BIT(5) | LASI_BIT(7) | LASI_BIT(8) | LASI_BIT(9) \
-            | LASI_BIT(13) | LASI_BIT(14) | LASI_BIT(16) | LASI_BIT(17) \
-            | LASI_BIT(18) | LASI_BIT(19) | LASI_BIT(20) | LASI_BIT(21) \
-            | LASI_BIT(26))
-
-#define ICR_BUS_ERROR_BIT  LASI_BIT(8)  /* bit 8 in ICR */
-#define ICR_TOC_BIT        LASI_BIT(1)  /* bit 1 in ICR */
-
-OBJECT_DECLARE_SIMPLE_TYPE(LasiState, LASI_CHIP)
-
-struct LasiState {
-    PCIHostState parent_obj;
-
-    uint32_t irr;
-    uint32_t imr;
-    uint32_t ipr;
-    uint32_t icr;
-    uint32_t iar;
-
-    uint32_t errlog;
-    uint32_t amr;
-    uint32_t rtc;
-    time_t rtc_ref;
-
-    MemoryRegion this_mem;
-};
 
 static bool lasi_chip_mem_valid(void *opaque, hwaddr addr,
                                 unsigned size, bool is_write,
diff --git a/hw/hppa/lasi.h b/hw/hppa/lasi.h
new file mode 100644
index 0000000000..559aae2560
--- /dev/null
+++ b/hw/hppa/lasi.h
@@ -0,0 +1,58 @@
+/*
+ * HP-PARISC Lasi chipset emulation.
+ *
+ * (C) 2019 by Helge Deller <deller@gmx.de>
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ * Documentation available at:
+ * https://parisc.wiki.kernel.org/images-parisc/7/79/Lasi_ers.pdf
+ */
+
+#ifndef LASI_H
+#define LASI_H
+
+#define TYPE_LASI_CHIP "lasi-chip"
+OBJECT_DECLARE_SIMPLE_TYPE(LasiState, LASI_CHIP)
+
+#define LASI_IRR        0x00    /* RO */
+#define LASI_IMR        0x04
+#define LASI_IPR        0x08
+#define LASI_ICR        0x0c
+#define LASI_IAR        0x10
+
+#define LASI_PCR        0x0C000 /* LASI Power Control register */
+#define LASI_ERRLOG     0x0C004 /* LASI Error Logging register */
+#define LASI_VER        0x0C008 /* LASI Version Control register */
+#define LASI_IORESET    0x0C00C /* LASI I/O Reset register */
+#define LASI_AMR        0x0C010 /* LASI Arbitration Mask register */
+#define LASI_IO_CONF    0x7FFFE /* LASI primary configuration register */
+#define LASI_IO_CONF2   0x7FFFF /* LASI secondary configuration register */
+
+#define LASI_BIT(x)     (1ul << (x))
+#define LASI_IRQ_BITS   (LASI_BIT(5) | LASI_BIT(7) | LASI_BIT(8) | LASI_BIT(9) \
+            | LASI_BIT(13) | LASI_BIT(14) | LASI_BIT(16) | LASI_BIT(17) \
+            | LASI_BIT(18) | LASI_BIT(19) | LASI_BIT(20) | LASI_BIT(21) \
+            | LASI_BIT(26))
+
+#define ICR_BUS_ERROR_BIT  LASI_BIT(8)  /* bit 8 in ICR */
+#define ICR_TOC_BIT        LASI_BIT(1)  /* bit 1 in ICR */
+
+struct LasiState {
+    PCIHostState parent_obj;
+
+    uint32_t irr;
+    uint32_t imr;
+    uint32_t ipr;
+    uint32_t icr;
+    uint32_t iar;
+
+    uint32_t errlog;
+    uint32_t amr;
+    uint32_t rtc;
+    time_t rtc_ref;
+
+    MemoryRegion this_mem;
+};
+
+#endif
-- 
2.20.1

[PATCH v2 28/50] lasi: replace lasi_get_irq() with defined constants

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 31 ++++---------------------------
 hw/hppa/lasi.h |  9 +++++++++
 2 files changed, 13 insertions(+), 27 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index c1dfd5310f..ec079601a1 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -231,29 +231,6 @@ static void lasi_set_irq(void *opaque, int irq, int level)
     }
 }
 
-static int lasi_get_irq(unsigned long hpa)
-{
-    switch (hpa) {
-    case LASI_HPA:
-        return 14;
-    case LASI_UART_HPA:
-        return 5;
-    case LASI_LPT_HPA:
-        return 7;
-    case LASI_LAN_HPA:
-        return 8;
-    case LASI_SCSI_HPA:
-        return 9;
-    case LASI_AUDIO_HPA:
-        return 13;
-    case LASI_PS2KBD_HPA:
-    case LASI_PS2MOU_HPA:
-        return 26;
-    default:
-        g_assert_not_reached();
-    }
-}
-
 DeviceState *lasi_initfn(MemoryRegion *address_space)
 {
     DeviceState *dev;
@@ -266,20 +243,20 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
     /* LAN */
     if (enable_lasi_lan()) {
         qemu_irq lan_irq = qemu_allocate_irq(lasi_set_irq, s,
-                lasi_get_irq(LASI_LAN_HPA));
+                                             LASI_IRQ_LAN_HPA);
         lasi_82596_init(address_space, LASI_LAN_HPA, lan_irq);
     }
 
     /* Parallel port */
     qemu_irq lpt_irq = qemu_allocate_irq(lasi_set_irq, s,
-            lasi_get_irq(LASI_LPT_HPA));
+                                         LASI_IRQ_LPT_HPA);
     parallel_mm_init(address_space, LASI_LPT_HPA + 0x800, 0,
                      lpt_irq, parallel_hds[0]);
 
     if (serial_hd(1)) {
         /* Serial port */
         qemu_irq serial_irq = qemu_allocate_irq(lasi_set_irq, s,
-                lasi_get_irq(LASI_UART_HPA));
+                                                LASI_IRQ_UART_HPA);
         serial_mm_init(address_space, LASI_UART_HPA + 0x800, 0,
                 serial_irq, 8000000 / 16,
                 serial_hd(0), DEVICE_NATIVE_ENDIAN);
@@ -287,7 +264,7 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
 
     /* PS/2 Keyboard/Mouse */
     qemu_irq ps2kbd_irq = qemu_allocate_irq(lasi_set_irq, s,
-            lasi_get_irq(LASI_PS2KBD_HPA));
+                                            LASI_IRQ_PS2KBD_HPA);
     lasips2_init(address_space, LASI_PS2KBD_HPA,  ps2kbd_irq);
 
     return dev;
diff --git a/hw/hppa/lasi.h b/hw/hppa/lasi.h
index 559aae2560..f40546da6e 100644
--- a/hw/hppa/lasi.h
+++ b/hw/hppa/lasi.h
@@ -38,6 +38,15 @@ OBJECT_DECLARE_SIMPLE_TYPE(LasiState, LASI_CHIP)
 #define ICR_BUS_ERROR_BIT  LASI_BIT(8)  /* bit 8 in ICR */
 #define ICR_TOC_BIT        LASI_BIT(1)  /* bit 1 in ICR */
 
+#define LASI_IRQ_HPA        14
+#define LASI_IRQ_UART_HPA   5
+#define LASI_IRQ_LPT_HPA    7
+#define LASI_IRQ_LAN_HPA    8
+#define LASI_IRQ_SCSI_HPA   9
+#define LASI_IRQ_AUDIO_HPA  13
+#define LASI_IRQ_PS2KBD_HPA 26
+#define LASI_IRQ_PS2MOU_HPA 26
+
 struct LasiState {
     PCIHostState parent_obj;
 
-- 
2.20.1

[PATCH v2 29/50] lasi: define IRQ inputs as qdev GPIOs

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 2 ++
 hw/hppa/lasi.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index ec079601a1..9489a80bad 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -290,6 +290,8 @@ static void lasi_init(Object *obj)
                           s, "lasi", 0x100000);
 
     sysbus_init_mmio(sbd, &s->this_mem);
+
+    qdev_init_gpio_in(DEVICE(obj), lasi_set_irq, LASI_IRQS);
 }
 
 static void lasi_class_init(ObjectClass *klass, void *data)
diff --git a/hw/hppa/lasi.h b/hw/hppa/lasi.h
index f40546da6e..63a2be3740 100644
--- a/hw/hppa/lasi.h
+++ b/hw/hppa/lasi.h
@@ -38,6 +38,8 @@ OBJECT_DECLARE_SIMPLE_TYPE(LasiState, LASI_CHIP)
 #define ICR_BUS_ERROR_BIT  LASI_BIT(8)  /* bit 8 in ICR */
 #define ICR_TOC_BIT        LASI_BIT(1)  /* bit 1 in ICR */
 
+#define LASI_IRQS           27
+
 #define LASI_IRQ_HPA        14
 #define LASI_IRQ_UART_HPA   5
 #define LASI_IRQ_LPT_HPA    7
-- 
2.20.1

[PATCH v2 30/50] lasi: use qdev GPIOs to wire up IRQs in lasi_initfn()

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 9489a80bad..32c7514d3a 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -234,38 +234,31 @@ static void lasi_set_irq(void *opaque, int irq, int level)
 DeviceState *lasi_initfn(MemoryRegion *address_space)
 {
     DeviceState *dev;
-    LasiState *s;
 
     dev = qdev_new(TYPE_LASI_CHIP);
-    s = LASI_CHIP(dev);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     /* LAN */
     if (enable_lasi_lan()) {
-        qemu_irq lan_irq = qemu_allocate_irq(lasi_set_irq, s,
-                                             LASI_IRQ_LAN_HPA);
-        lasi_82596_init(address_space, LASI_LAN_HPA, lan_irq);
+        lasi_82596_init(address_space, LASI_LAN_HPA,
+                        qdev_get_gpio_in(dev, LASI_IRQ_LAN_HPA));
     }
 
     /* Parallel port */
-    qemu_irq lpt_irq = qemu_allocate_irq(lasi_set_irq, s,
-                                         LASI_IRQ_LPT_HPA);
     parallel_mm_init(address_space, LASI_LPT_HPA + 0x800, 0,
-                     lpt_irq, parallel_hds[0]);
+                     qdev_get_gpio_in(dev, LASI_IRQ_LAN_HPA),
+                     parallel_hds[0]);
 
     if (serial_hd(1)) {
         /* Serial port */
-        qemu_irq serial_irq = qemu_allocate_irq(lasi_set_irq, s,
-                                                LASI_IRQ_UART_HPA);
         serial_mm_init(address_space, LASI_UART_HPA + 0x800, 0,
-                serial_irq, 8000000 / 16,
+                qdev_get_gpio_in(dev, LASI_IRQ_UART_HPA), 8000000 / 16,
                 serial_hd(0), DEVICE_NATIVE_ENDIAN);
     }
 
     /* PS/2 Keyboard/Mouse */
-    qemu_irq ps2kbd_irq = qemu_allocate_irq(lasi_set_irq, s,
-                                            LASI_IRQ_PS2KBD_HPA);
-    lasips2_init(address_space, LASI_PS2KBD_HPA,  ps2kbd_irq);
+    lasips2_init(address_space, LASI_PS2KBD_HPA,
+                 qdev_get_gpio_in(dev, LASI_IRQ_PS2KBD_HPA));
 
     return dev;
 }
-- 
2.20.1

[PATCH v2 31/50] lasi: fix serial port initialisation

[Mark Cave-Ayland]

The existing code checks for serial_hd(1) but sets the LASI serial port chardev
to serial_hd(0). Use serial_hd(1) for the LASI serial port and also set the
serial port endian to DEVICE_BIG_ENDIAN (which also matches the endian of the
existing serial port).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 32c7514d3a..219eb779f3 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -253,7 +253,7 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
         /* Serial port */
         serial_mm_init(address_space, LASI_UART_HPA + 0x800, 0,
                 qdev_get_gpio_in(dev, LASI_IRQ_UART_HPA), 8000000 / 16,
-                serial_hd(0), DEVICE_NATIVE_ENDIAN);
+                serial_hd(1), DEVICE_BIG_ENDIAN);
     }
 
     /* PS/2 Keyboard/Mouse */
-- 
2.20.1

[PATCH v2 32/50] lasi: update lasi_initfn() to return LASIState

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h | 3 ++-
 hw/hppa/lasi.c     | 4 ++--
 hw/hppa/machine.c  | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 0929dedded..3832b787d1 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -7,10 +7,11 @@
 #include "hw/pci/pci_host.h"
 #include "hw/boards.h"
 #include "hw/intc/i8259.h"
+#include "lasi.h"
 
 #include "hppa_hardware.h"
 
-DeviceState *lasi_initfn(MemoryRegion *);
+LasiState *lasi_initfn(MemoryRegion *);
 #define enable_lasi_lan()       0
 
 /* hppa_pci.c.  */
diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 219eb779f3..65139bb29b 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -231,7 +231,7 @@ static void lasi_set_irq(void *opaque, int irq, int level)
     }
 }
 
-DeviceState *lasi_initfn(MemoryRegion *address_space)
+LasiState *lasi_initfn(MemoryRegion *address_space)
 {
     DeviceState *dev;
 
@@ -260,7 +260,7 @@ DeviceState *lasi_initfn(MemoryRegion *address_space)
     lasips2_init(address_space, LASI_PS2KBD_HPA,
                  qdev_get_gpio_in(dev, LASI_IRQ_PS2KBD_HPA));
 
-    return dev;
+    return LASI_CHIP(dev);
 }
 
 static void lasi_reset(DeviceState *dev)
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 6618bce435..c815dde305 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -18,6 +18,7 @@
 #include "hw/net/lasi_82596.h"
 #include "hw/nmi.h"
 #include "hw/pci-host/dino.h"
+#include "lasi.h"
 #include "hppa_sys.h"
 #include "qemu/units.h"
 #include "qapi/error.h"
@@ -175,7 +176,7 @@ static void machine_hppa_init(MachineState *machine)
 
 
     /* Init Lasi chip */
-    lasi_dev = lasi_initfn(addr_space);
+    lasi_dev = DEVICE(lasi_initfn(addr_space));
     memory_region_add_subregion(addr_space, LASI_HPA,
                                 sysbus_mmio_get_region(
                                     SYS_BUS_DEVICE(lasi_dev), 0));
-- 
2.20.1

[PATCH v2 33/50] lasi: move LAN initialisation to machine.c

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c    | 7 -------
 hw/hppa/machine.c | 5 +++++
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 65139bb29b..88ff9141e4 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -18,7 +18,6 @@
 #include "sysemu/sysemu.h"
 #include "sysemu/runstate.h"
 #include "hppa_sys.h"
-#include "hw/net/lasi_82596.h"
 #include "hw/char/parallel.h"
 #include "hw/char/serial.h"
 #include "hw/input/lasips2.h"
@@ -238,12 +237,6 @@ LasiState *lasi_initfn(MemoryRegion *address_space)
     dev = qdev_new(TYPE_LASI_CHIP);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
-    /* LAN */
-    if (enable_lasi_lan()) {
-        lasi_82596_init(address_space, LASI_LAN_HPA,
-                        qdev_get_gpio_in(dev, LASI_IRQ_LAN_HPA));
-    }
-
     /* Parallel port */
     parallel_mm_init(address_space, LASI_LPT_HPA + 0x800, 0,
                      qdev_get_gpio_in(dev, LASI_IRQ_LAN_HPA),
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index c815dde305..b3b4a00ad6 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -221,6 +221,11 @@ static void machine_hppa_init(MachineState *machine)
     }
 
     /* Network setup. */
+    if (enable_lasi_lan()) {
+        lasi_82596_init(addr_space, LASI_LAN_HPA,
+                        qdev_get_gpio_in(lasi_dev, LASI_IRQ_LAN_HPA));
+    }
+
     for (i = 0; i < nb_nics; i++) {
         if (!enable_lasi_lan()) {
             pci_nic_init_nofail(&nd_table[i], pci_bus, "tulip", NULL);
-- 
2.20.1

[PATCH v2 34/50] lasi: move parallel port initialisation to machine.c

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c    | 6 ------
 hw/hppa/machine.c | 6 ++++++
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 88ff9141e4..6faa98dca5 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -18,7 +18,6 @@
 #include "sysemu/sysemu.h"
 #include "sysemu/runstate.h"
 #include "hppa_sys.h"
-#include "hw/char/parallel.h"
 #include "hw/char/serial.h"
 #include "hw/input/lasips2.h"
 #include "migration/vmstate.h"
@@ -237,11 +236,6 @@ LasiState *lasi_initfn(MemoryRegion *address_space)
     dev = qdev_new(TYPE_LASI_CHIP);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
-    /* Parallel port */
-    parallel_mm_init(address_space, LASI_LPT_HPA + 0x800, 0,
-                     qdev_get_gpio_in(dev, LASI_IRQ_LAN_HPA),
-                     parallel_hds[0]);
-
     if (serial_hd(1)) {
         /* Serial port */
         serial_mm_init(address_space, LASI_UART_HPA + 0x800, 0,
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index b3b4a00ad6..5244178aaf 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -15,6 +15,7 @@
 #include "hw/rtc/mc146818rtc.h"
 #include "hw/timer/i8254.h"
 #include "hw/char/serial.h"
+#include "hw/char/parallel.h"
 #include "hw/net/lasi_82596.h"
 #include "hw/nmi.h"
 #include "hw/pci-host/dino.h"
@@ -204,6 +205,11 @@ static void machine_hppa_init(MachineState *machine)
                        115200, serial_hd(0), DEVICE_BIG_ENDIAN);
     }
 
+    /* Parallel port */
+    parallel_mm_init(addr_space, LASI_LPT_HPA + 0x800, 0,
+                     qdev_get_gpio_in(lasi_dev, LASI_IRQ_LAN_HPA),
+                     parallel_hds[0]);
+
     /* fw_cfg configuration interface */
     create_fw_cfg(machine);
 
-- 
2.20.1

[PATCH v2 35/50] lasi: move second serial port initialisation to machine.c

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c    | 8 --------
 hw/hppa/machine.c | 7 +++++++
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 6faa98dca5..753a08d454 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -18,7 +18,6 @@
 #include "sysemu/sysemu.h"
 #include "sysemu/runstate.h"
 #include "hppa_sys.h"
-#include "hw/char/serial.h"
 #include "hw/input/lasips2.h"
 #include "migration/vmstate.h"
 #include "qom/object.h"
@@ -236,13 +235,6 @@ LasiState *lasi_initfn(MemoryRegion *address_space)
     dev = qdev_new(TYPE_LASI_CHIP);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
-    if (serial_hd(1)) {
-        /* Serial port */
-        serial_mm_init(address_space, LASI_UART_HPA + 0x800, 0,
-                qdev_get_gpio_in(dev, LASI_IRQ_UART_HPA), 8000000 / 16,
-                serial_hd(1), DEVICE_BIG_ENDIAN);
-    }
-
     /* PS/2 Keyboard/Mouse */
     lasips2_init(address_space, LASI_PS2KBD_HPA,
                  qdev_get_gpio_in(dev, LASI_IRQ_PS2KBD_HPA));
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 5244178aaf..5b43ae2960 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -205,6 +205,13 @@ static void machine_hppa_init(MachineState *machine)
                        115200, serial_hd(0), DEVICE_BIG_ENDIAN);
     }
 
+    if (serial_hd(1)) {
+        /* Serial port */
+        serial_mm_init(addr_space, LASI_UART_HPA + 0x800, 0,
+                qdev_get_gpio_in(lasi_dev, LASI_IRQ_UART_HPA), 8000000 / 16,
+                serial_hd(1), DEVICE_BIG_ENDIAN);
+    }
+
     /* Parallel port */
     parallel_mm_init(addr_space, LASI_LPT_HPA + 0x800, 0,
                      qdev_get_gpio_in(lasi_dev, LASI_IRQ_LAN_HPA),
-- 
2.20.1

[PATCH v2 36/50] lasi: move PS2 initialisation to machine.c

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c    | 5 -----
 hw/hppa/machine.c | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 753a08d454..9d8c9e3936 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -18,7 +18,6 @@
 #include "sysemu/sysemu.h"
 #include "sysemu/runstate.h"
 #include "hppa_sys.h"
-#include "hw/input/lasips2.h"
 #include "migration/vmstate.h"
 #include "qom/object.h"
 #include "lasi.h"
@@ -235,10 +234,6 @@ LasiState *lasi_initfn(MemoryRegion *address_space)
     dev = qdev_new(TYPE_LASI_CHIP);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
-    /* PS/2 Keyboard/Mouse */
-    lasips2_init(address_space, LASI_PS2KBD_HPA,
-                 qdev_get_gpio_in(dev, LASI_IRQ_PS2KBD_HPA));
-
     return LASI_CHIP(dev);
 }
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 5b43ae2960..1d48ec341d 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -16,6 +16,7 @@
 #include "hw/timer/i8254.h"
 #include "hw/char/serial.h"
 #include "hw/char/parallel.h"
+#include "hw/input/lasips2.h"
 #include "hw/net/lasi_82596.h"
 #include "hw/nmi.h"
 #include "hw/pci-host/dino.h"
@@ -245,6 +246,10 @@ static void machine_hppa_init(MachineState *machine)
         }
     }
 
+    /* PS/2 Keyboard/Mouse */
+    lasips2_init(addr_space, LASI_PS2KBD_HPA,
+                 qdev_get_gpio_in(lasi_dev, LASI_IRQ_PS2KBD_HPA));
+
     /* register power switch emulation */
     qemu_register_powerdown_notifier(&hppa_system_powerdown_notifier);
 
-- 
2.20.1

[PATCH v2 37/50] lasi: remove address space parameter from lasi_initfn()

[Mark Cave-Ayland]

Now that all of the LASI devices are mapped by the board, this parameter is no
longer required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h | 2 +-
 hw/hppa/lasi.c     | 2 +-
 hw/hppa/machine.c  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 3832b787d1..31e3856059 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -11,7 +11,7 @@
 
 #include "hppa_hardware.h"
 
-LasiState *lasi_initfn(MemoryRegion *);
+LasiState *lasi_initfn(void);
 #define enable_lasi_lan()       0
 
 /* hppa_pci.c.  */
diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 9d8c9e3936..81c8e4d2d9 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -227,7 +227,7 @@ static void lasi_set_irq(void *opaque, int irq, int level)
     }
 }
 
-LasiState *lasi_initfn(MemoryRegion *address_space)
+LasiState *lasi_initfn(void)
 {
     DeviceState *dev;
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 1d48ec341d..52f12f6604 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -178,7 +178,7 @@ static void machine_hppa_init(MachineState *machine)
 
 
     /* Init Lasi chip */
-    lasi_dev = DEVICE(lasi_initfn(addr_space));
+    lasi_dev = DEVICE(lasi_initfn());
     memory_region_add_subregion(addr_space, LASI_HPA,
                                 sysbus_mmio_get_region(
                                     SYS_BUS_DEVICE(lasi_dev), 0));
-- 
2.20.1

[PATCH v2 38/50] lasi: move lasi_initfn() to machine.c

[Mark Cave-Ayland]

Move the simplified lasi_initfn() back to machine.c whilst also renaming it
back to its original lasi_init() name.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h |  2 --
 hw/hppa/lasi.c     | 10 ----------
 hw/hppa/machine.c  | 12 +++++++++++-
 3 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 31e3856059..f7a127be19 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -7,11 +7,9 @@
 #include "hw/pci/pci_host.h"
 #include "hw/boards.h"
 #include "hw/intc/i8259.h"
-#include "lasi.h"
 
 #include "hppa_hardware.h"
 
-LasiState *lasi_initfn(void);
 #define enable_lasi_lan()       0
 
 /* hppa_pci.c.  */
diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 81c8e4d2d9..ad50880a13 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -227,16 +227,6 @@ static void lasi_set_irq(void *opaque, int irq, int level)
     }
 }
 
-LasiState *lasi_initfn(void)
-{
-    DeviceState *dev;
-
-    dev = qdev_new(TYPE_LASI_CHIP);
-    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-
-    return LASI_CHIP(dev);
-}
-
 static void lasi_reset(DeviceState *dev)
 {
     LasiState *s = LASI_CHIP(dev);
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 52f12f6604..58b25ca5bc 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -125,6 +125,16 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
     return fw_cfg;
 }
 
+static LasiState *lasi_init(void)
+{
+    DeviceState *dev;
+
+    dev = qdev_new(TYPE_LASI_CHIP);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+
+    return LASI_CHIP(dev);
+}
+
 static DinoState *dino_init(MemoryRegion *addr_space)
 {
     DeviceState *dev;
@@ -178,7 +188,7 @@ static void machine_hppa_init(MachineState *machine)
 
 
     /* Init Lasi chip */
-    lasi_dev = DEVICE(lasi_initfn());
+    lasi_dev = DEVICE(lasi_init());
     memory_region_add_subregion(addr_space, LASI_HPA,
                                 sysbus_mmio_get_region(
                                     SYS_BUS_DEVICE(lasi_dev), 0));
-- 
2.20.1

[PATCH v2 39/50] lasi: use constants for device register offsets

[Mark Cave-Ayland]

Instead of generating the offset based upon the physical address of the
register, add constants for each of the device registers to lasi.h and
update lasi.c to use them.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 28 ++++++++++++++--------------
 hw/hppa/lasi.h |  5 +++++
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index ad50880a13..11ca33fba3 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -36,10 +36,10 @@ static bool lasi_chip_mem_valid(void *opaque, hwaddr addr,
     case LASI_ICR:
     case LASI_IAR:
 
-    case (LASI_LAN_HPA - LASI_HPA):
-    case (LASI_LPT_HPA - LASI_HPA):
-    case (LASI_UART_HPA - LASI_HPA):
-    case (LASI_RTC_HPA - LASI_HPA):
+    case LASI_LPT:
+    case LASI_UART:
+    case LASI_LAN:
+    case LASI_RTC:
 
     case LASI_PCR ... LASI_AMR:
         ret = true;
@@ -76,12 +76,12 @@ static MemTxResult lasi_chip_read_with_attrs(void *opaque, hwaddr addr,
         val = s->iar;
         break;
 
-    case (LASI_LAN_HPA - LASI_HPA):
-    case (LASI_LPT_HPA - LASI_HPA):
-    case (LASI_UART_HPA - LASI_HPA):
+    case LASI_LPT:
+    case LASI_UART:
+    case LASI_LAN:
         val = 0;
         break;
-    case (LASI_RTC_HPA - LASI_HPA):
+    case LASI_RTC:
         val = time(NULL);
         val += s->rtc_ref;
         break;
@@ -141,16 +141,16 @@ static MemTxResult lasi_chip_write_with_attrs(void *opaque, hwaddr addr,
         s->iar = val;
         break;
 
-    case (LASI_LAN_HPA - LASI_HPA):
-        /* XXX: reset LAN card */
-        break;
-    case (LASI_LPT_HPA - LASI_HPA):
+    case LASI_LPT:
         /* XXX: reset parallel port */
         break;
-    case (LASI_UART_HPA - LASI_HPA):
+    case LASI_UART:
         /* XXX: reset serial port */
         break;
-    case (LASI_RTC_HPA - LASI_HPA):
+    case LASI_LAN:
+        /* XXX: reset LAN card */
+        break;
+    case LASI_RTC:
         s->rtc_ref = val - time(NULL);
         break;
 
diff --git a/hw/hppa/lasi.h b/hw/hppa/lasi.h
index 63a2be3740..11cf7d6b0b 100644
--- a/hw/hppa/lasi.h
+++ b/hw/hppa/lasi.h
@@ -21,6 +21,11 @@ OBJECT_DECLARE_SIMPLE_TYPE(LasiState, LASI_CHIP)
 #define LASI_ICR        0x0c
 #define LASI_IAR        0x10
 
+#define LASI_LPT        0x02000
+#define LASI_UART       0x05000
+#define LASI_LAN        0x07000
+#define LASI_RTC        0x09000
+
 #define LASI_PCR        0x0C000 /* LASI Power Control register */
 #define LASI_ERRLOG     0x0C004 /* LASI Error Logging register */
 #define LASI_VER        0x0C008 /* LASI Version Control register */
-- 
2.20.1

[PATCH v2 40/50] lasi: use numerical constant for iar reset value

[Mark Cave-Ayland]

This is to allow us to decouple the LASI device from the board logic. If it is
decided later that this value needs to be configurable then it can easily be
converted to a qdev property.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/lasi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/hppa/lasi.c b/hw/hppa/lasi.c
index 11ca33fba3..5ef36f3f58 100644
--- a/hw/hppa/lasi.c
+++ b/hw/hppa/lasi.c
@@ -231,7 +231,7 @@ static void lasi_reset(DeviceState *dev)
 {
     LasiState *s = LASI_CHIP(dev);
 
-    s->iar = CPU_HPA + 3;
+    s->iar = 0xFFFB0000 + 3; /* CPU_HPA + 3 */
 
     /* Real time clock (RTC), it's only one 32-bit counter @9000 */
     s->rtc = time(NULL);
-- 
2.20.1

[PATCH v2 41/50] hppa: move device headers from hppa_sys.h into individual .c files

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h | 3 ---
 hw/hppa/lasi.h     | 4 ++++
 hw/hppa/machine.c  | 2 ++
 hw/hppa/pci.c      | 3 +++
 4 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index f7a127be19..9964d4a7a7 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -3,10 +3,7 @@
 #ifndef HW_HPPA_SYS_H
 #define HW_HPPA_SYS_H
 
-#include "hw/pci/pci.h"
-#include "hw/pci/pci_host.h"
 #include "hw/boards.h"
-#include "hw/intc/i8259.h"
 
 #include "hppa_hardware.h"
 
diff --git a/hw/hppa/lasi.h b/hw/hppa/lasi.h
index 11cf7d6b0b..ecc7065ce8 100644
--- a/hw/hppa/lasi.h
+++ b/hw/hppa/lasi.h
@@ -12,6 +12,10 @@
 #ifndef LASI_H
 #define LASI_H
 
+#include "exec/address-spaces.h"
+#include "hw/pci/pci_host.h"
+#include "hw/boards.h"
+
 #define TYPE_LASI_CHIP "lasi-chip"
 OBJECT_DECLARE_SIMPLE_TYPE(LasiState, LASI_CHIP)
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 58b25ca5bc..9d904b7a60 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -16,9 +16,11 @@
 #include "hw/timer/i8254.h"
 #include "hw/char/serial.h"
 #include "hw/char/parallel.h"
+#include "hw/intc/i8259.h"
 #include "hw/input/lasips2.h"
 #include "hw/net/lasi_82596.h"
 #include "hw/nmi.h"
+#include "hw/pci/pci.h"
 #include "hw/pci-host/dino.h"
 #include "lasi.h"
 #include "hppa_sys.h"
diff --git a/hw/hppa/pci.c b/hw/hppa/pci.c
index 32609aba63..a92dcb6b9e 100644
--- a/hw/hppa/pci.c
+++ b/hw/hppa/pci.c
@@ -6,6 +6,9 @@
 #include "qemu/osdep.h"
 #include "hppa_sys.h"
 #include "qemu/log.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "hw/intc/i8259.h"
 #include "trace.h"
 
 
-- 
2.20.1

[PATCH v2 42/50] lasi: move from hw/hppa to hw/misc

[Mark Cave-Ayland]

Move the LASI device implementation from hw/hppa to hw/misc so that it is
located with all the other miscellaneous devices.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 MAINTAINERS                         | 2 ++
 hw/hppa/Kconfig                     | 1 +
 hw/hppa/machine.c                   | 2 +-
 hw/hppa/meson.build                 | 2 +-
 hw/hppa/trace-events                | 5 -----
 hw/misc/Kconfig                     | 3 +++
 hw/{hppa => misc}/lasi.c            | 3 +--
 hw/misc/meson.build                 | 3 +++
 hw/misc/trace-events                | 5 +++++
 {hw/hppa => include/hw/misc}/lasi.h | 0
 10 files changed, 17 insertions(+), 9 deletions(-)
 rename hw/{hppa => misc}/lasi.c (99%)
 rename {hw/hppa => include/hw/misc}/lasi.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 07f85829b0..162a1732d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1114,7 +1114,9 @@ S: Odd Fixes
 F: configs/devices/hppa-softmmu/default.mak
 F: hw/hppa/
 F: hw/net/*i82596*
+F: hw/misc/lasi.c
 F: hw/pci-host/dino.c
+F: include/hw/misc/lasi.h
 F: include/hw/net/lasi_82596.h
 F: include/hw/pci-host/dino.h
 F: pc-bios/hppa-firmware.img
diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig
index 724380ecec..5dd8b5b21e 100644
--- a/hw/hppa/Kconfig
+++ b/hw/hppa/Kconfig
@@ -4,6 +4,7 @@ config HPPA_B160L
     imply E1000_PCI
     imply VIRTIO_VGA
     select DINO
+    select LASI
     select SERIAL
     select ISA_BUS
     select I8259
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 9d904b7a60..f3d72b4c35 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -22,7 +22,7 @@
 #include "hw/nmi.h"
 #include "hw/pci/pci.h"
 #include "hw/pci-host/dino.h"
-#include "lasi.h"
+#include "hw/misc/lasi.h"
 #include "hppa_sys.h"
 #include "qemu/units.h"
 #include "qapi/error.h"
diff --git a/hw/hppa/meson.build b/hw/hppa/meson.build
index a6f9db455c..bd5a1fb1d2 100644
--- a/hw/hppa/meson.build
+++ b/hw/hppa/meson.build
@@ -1,4 +1,4 @@
 hppa_ss = ss.source_set()
-hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('pci.c', 'machine.c', 'lasi.c'))
+hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('pci.c', 'machine.c'))
 
 hw_arch += {'hppa': hppa_ss}
diff --git a/hw/hppa/trace-events b/hw/hppa/trace-events
index 871a473771..1a4fbe2fa8 100644
--- a/hw/hppa/trace-events
+++ b/hw/hppa/trace-events
@@ -2,8 +2,3 @@
 
 # pci.c
 hppa_pci_iack_write(void) ""
-
-# lasi.c
-lasi_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
-lasi_chip_read(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
-lasi_chip_write(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 507058d8bf..cbabe9f78c 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -171,4 +171,7 @@ config SIFIVE_U_PRCI
 config VIRT_CTRL
     bool
 
+config LASI
+    bool
+
 source macio/Kconfig
diff --git a/hw/hppa/lasi.c b/hw/misc/lasi.c
similarity index 99%
rename from hw/hppa/lasi.c
rename to hw/misc/lasi.c
index 5ef36f3f58..23a7634a8c 100644
--- a/hw/hppa/lasi.c
+++ b/hw/misc/lasi.c
@@ -17,10 +17,9 @@
 #include "hw/irq.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/runstate.h"
-#include "hppa_sys.h"
 #include "migration/vmstate.h"
 #include "qom/object.h"
-#include "lasi.h"
+#include "hw/misc/lasi.h"
 
 
 static bool lasi_chip_mem_valid(void *opaque, hwaddr addr,
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 2ff05c7afa..132b7b7344 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -134,3 +134,6 @@ specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_cmgcr.c', 'mips_cp
 specific_ss.add(when: 'CONFIG_MIPS_ITU', if_true: files('mips_itu.c'))
 
 specific_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa_ec.c'))
+
+# HPPA devices
+softmmu_ss.add(when: 'CONFIG_LASI', if_true: files('lasi.c'))
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 4e0c7973a4..c5e37b0154 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -263,3 +263,8 @@ virt_ctrl_write(void *dev, unsigned int addr, unsigned int size, uint64_t value)
 virt_ctrl_reset(void *dev) "ctrl: %p"
 virt_ctrl_realize(void *dev) "ctrl: %p"
 virt_ctrl_instance_init(void *dev) "ctrl: %p"
+
+# lasi.c
+lasi_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
+lasi_chip_read(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
+lasi_chip_write(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
diff --git a/hw/hppa/lasi.h b/include/hw/misc/lasi.h
similarity index 100%
rename from hw/hppa/lasi.h
rename to include/hw/misc/lasi.h
-- 
2.20.1

[PATCH v2 43/50] hppa: move hppa_pci_ignore_ops from pci.c to machine.c

[Mark Cave-Ayland]

The memory region only has one user which is for ensuring accesses to the ISA
bus memory do not fault.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h |  1 -
 hw/hppa/machine.c  | 23 +++++++++++++++++++++++
 hw/hppa/pci.c      | 26 --------------------------
 3 files changed, 23 insertions(+), 27 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 9964d4a7a7..d984b2895d 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -10,7 +10,6 @@
 #define enable_lasi_lan()       0
 
 /* hppa_pci.c.  */
-extern const MemoryRegionOps hppa_pci_ignore_ops;
 extern const MemoryRegionOps hppa_pci_conf1_ops;
 extern const MemoryRegionOps hppa_pci_iack_ops;
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index f3d72b4c35..ca595d343e 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -57,6 +57,29 @@ static Notifier hppa_system_powerdown_notifier = {
     .notify = hppa_powerdown_req
 };
 
+/* Fallback for unassigned PCI I/O operations.  Avoids MCHK.  */
+static uint64_t ignore_read(void *opaque, hwaddr addr, unsigned size)
+{
+    return 0;
+}
+
+static void ignore_write(void *opaque, hwaddr addr, uint64_t v, unsigned size)
+{
+}
+
+static const MemoryRegionOps hppa_pci_ignore_ops = {
+    .read = ignore_read,
+    .write = ignore_write,
+    .endianness = DEVICE_BIG_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
 
 static ISABus *hppa_isa_bus(void)
 {
diff --git a/hw/hppa/pci.c b/hw/hppa/pci.c
index a92dcb6b9e..4d62d54c22 100644
--- a/hw/hppa/pci.c
+++ b/hw/hppa/pci.c
@@ -12,32 +12,6 @@
 #include "trace.h"
 
 
-/* Fallback for unassigned PCI I/O operations.  Avoids MCHK.  */
-
-static uint64_t ignore_read(void *opaque, hwaddr addr, unsigned size)
-{
-    return 0;
-}
-
-static void ignore_write(void *opaque, hwaddr addr, uint64_t v, unsigned size)
-{
-}
-
-const MemoryRegionOps hppa_pci_ignore_ops = {
-    .read = ignore_read,
-    .write = ignore_write,
-    .endianness = DEVICE_BIG_ENDIAN,
-    .valid = {
-        .min_access_size = 1,
-        .max_access_size = 8,
-    },
-    .impl = {
-        .min_access_size = 1,
-        .max_access_size = 8,
-    },
-};
-
-
 /* PCI config space reads/writes, to byte-word addressable memory.  */
 static uint64_t bw_conf1_read(void *opaque, hwaddr addr,
                               unsigned size)
-- 
2.20.1

[PATCH v2 44/50] hppa: remove hw/hppa/pci.c

[Mark Cave-Ayland]

The functions and definitions in this file are not used anywhere within the
generic hppa machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h   |  6 ----
 hw/hppa/meson.build  |  2 +-
 hw/hppa/pci.c        | 65 --------------------------------------------
 hw/hppa/trace-events |  3 --
 4 files changed, 1 insertion(+), 75 deletions(-)
 delete mode 100644 hw/hppa/pci.c

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index d984b2895d..17e2c6dec1 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -3,14 +3,8 @@
 #ifndef HW_HPPA_SYS_H
 #define HW_HPPA_SYS_H
 
-#include "hw/boards.h"
-
 #include "hppa_hardware.h"
 
 #define enable_lasi_lan()       0
 
-/* hppa_pci.c.  */
-extern const MemoryRegionOps hppa_pci_conf1_ops;
-extern const MemoryRegionOps hppa_pci_iack_ops;
-
 #endif
diff --git a/hw/hppa/meson.build b/hw/hppa/meson.build
index bd5a1fb1d2..3d0c586c30 100644
--- a/hw/hppa/meson.build
+++ b/hw/hppa/meson.build
@@ -1,4 +1,4 @@
 hppa_ss = ss.source_set()
-hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('pci.c', 'machine.c'))
+hppa_ss.add(when: 'CONFIG_HPPA_B160L', if_true: files('machine.c'))
 
 hw_arch += {'hppa': hppa_ss}
diff --git a/hw/hppa/pci.c b/hw/hppa/pci.c
deleted file mode 100644
index 4d62d54c22..0000000000
--- a/hw/hppa/pci.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * QEMU HP-PARISC PCI support functions.
- *
- */
-
-#include "qemu/osdep.h"
-#include "hppa_sys.h"
-#include "qemu/log.h"
-#include "hw/pci/pci.h"
-#include "hw/pci/pci_host.h"
-#include "hw/intc/i8259.h"
-#include "trace.h"
-
-
-/* PCI config space reads/writes, to byte-word addressable memory.  */
-static uint64_t bw_conf1_read(void *opaque, hwaddr addr,
-                              unsigned size)
-{
-    PCIBus *b = opaque;
-    return pci_data_read(b, addr, size);
-}
-
-static void bw_conf1_write(void *opaque, hwaddr addr,
-                           uint64_t val, unsigned size)
-{
-    PCIBus *b = opaque;
-    pci_data_write(b, addr, val, size);
-}
-
-const MemoryRegionOps hppa_pci_conf1_ops = {
-    .read = bw_conf1_read,
-    .write = bw_conf1_write,
-    .endianness = DEVICE_BIG_ENDIAN,
-    .impl = {
-        .min_access_size = 1,
-        .max_access_size = 4,
-    },
-};
-
-/* PCI/EISA Interrupt Acknowledge Cycle.  */
-
-static uint64_t iack_read(void *opaque, hwaddr addr, unsigned size)
-{
-    return pic_read_irq(isa_pic);
-}
-
-static void special_write(void *opaque, hwaddr addr,
-                          uint64_t val, unsigned size)
-{
-    trace_hppa_pci_iack_write();
-}
-
-const MemoryRegionOps hppa_pci_iack_ops = {
-    .read = iack_read,
-    .write = special_write,
-    .endianness = DEVICE_BIG_ENDIAN,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-    .impl = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-};
diff --git a/hw/hppa/trace-events b/hw/hppa/trace-events
index 1a4fbe2fa8..23bc9b19b9 100644
--- a/hw/hppa/trace-events
+++ b/hw/hppa/trace-events
@@ -1,4 +1 @@
 # See docs/devel/tracing.rst for syntax documentation.
-
-# pci.c
-hppa_pci_iack_write(void) ""
-- 
2.20.1

[PATCH v2 45/50] hppa: remove unused trace-events from from hw/hppa

[Mark Cave-Ayland]

Now that there are no longer any devices in hw/hppa the trace-events file is
empty and can be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/trace-events | 1 -
 meson.build          | 1 -
 2 files changed, 2 deletions(-)
 delete mode 100644 hw/hppa/trace-events

diff --git a/hw/hppa/trace-events b/hw/hppa/trace-events
deleted file mode 100644
index 23bc9b19b9..0000000000
--- a/hw/hppa/trace-events
+++ /dev/null
@@ -1 +0,0 @@
-# See docs/devel/tracing.rst for syntax documentation.
diff --git a/meson.build b/meson.build
index 1fe7d257ff..95dcfd41f7 100644
--- a/meson.build
+++ b/meson.build
@@ -2816,7 +2816,6 @@ if have_system
     'hw/char',
     'hw/display',
     'hw/dma',
-    'hw/hppa',
     'hw/hyperv',
     'hw/i2c',
     'hw/i386',
-- 
2.20.1

[PATCH v2 46/50] hppa: move enable_lan() define from hppa_sys.h to machine.c

[Mark Cave-Ayland]

Now that the board configuration is in one place, the define is only needed when
wiring up the board in machine.c.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h | 2 --
 hw/hppa/machine.c  | 3 +++
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 17e2c6dec1..e7f65cad75 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -5,6 +5,4 @@
 
 #include "hppa_hardware.h"
 
-#define enable_lasi_lan()       0
-
 #endif
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index ca595d343e..e6431aa541 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -36,6 +36,9 @@
 
 #define HPA_POWER_BUTTON (FIRMWARE_END - 0x10)
 
+#define enable_lasi_lan()       0
+
+
 static void hppa_powerdown_req(Notifier *n, void *opaque)
 {
     hwaddr soft_power_reg = HPA_POWER_BUTTON;
-- 
2.20.1

[PATCH v2 47/50] hppa: remove the empty hppa_sys.h file

[Mark Cave-Ayland]

This file is now just a simple wrapper that includes hppa_hardware.h so remove
the file completely, and update its single user in machine.c to include
hppa_hardware.h directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/hppa_sys.h | 8 --------
 hw/hppa/machine.c  | 2 +-
 2 files changed, 1 insertion(+), 9 deletions(-)
 delete mode 100644 hw/hppa/hppa_sys.h

diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
deleted file mode 100644
index e7f65cad75..0000000000
--- a/hw/hppa/hppa_sys.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* HPPA cores and system support chips.  */
-
-#ifndef HW_HPPA_SYS_H
-#define HW_HPPA_SYS_H
-
-#include "hppa_hardware.h"
-
-#endif
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index e6431aa541..75820838bf 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -23,7 +23,7 @@
 #include "hw/pci/pci.h"
 #include "hw/pci-host/dino.h"
 #include "hw/misc/lasi.h"
-#include "hppa_sys.h"
+#include "hppa_hardware.h"
 #include "qemu/units.h"
 #include "qapi/error.h"
 #include "net/net.h"
-- 
2.20.1

[PATCH v2 48/50] hppa: use MACHINE QOM macros for defining the hppa machine

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/machine.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 75820838bf..2393335a64 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -471,8 +471,8 @@ static void machine_hppa_machine_init_class_init(ObjectClass *oc, void *data)
 }
 
 static const TypeInfo machine_hppa_machine_init_typeinfo = {
-    .name = ("hppa" "-machine"),
-    .parent = "machine",
+    .name = MACHINE_TYPE_NAME("hppa"),
+    .parent = TYPE_MACHINE,
     .class_init = machine_hppa_machine_init_class_init,
     .interfaces = (InterfaceInfo[]) {
         { TYPE_NMI },
-- 
2.20.1

[PATCH v2 49/50] hppa: fold machine_hppa_machine_init() into machine_hppa_machine_init_class_init()

[Mark Cave-Ayland]

There is no need for a separate function to set the machine class properties
separately from the others.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/machine.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 2393335a64..724ee24795 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -446,8 +446,11 @@ static void hppa_nmi(NMIState *n, int cpu_index, Error **errp)
     }
 }
 
-static void machine_hppa_machine_init(MachineClass *mc)
+static void machine_hppa_machine_init_class_init(ObjectClass *oc, void *data)
 {
+    MachineClass *mc = MACHINE_CLASS(oc);
+    NMIClass *nc = NMI_CLASS(oc);
+
     mc->desc = "HPPA B160L machine";
     mc->default_cpu_type = TYPE_HPPA_CPU;
     mc->init = machine_hppa_init;
@@ -459,14 +462,7 @@ static void machine_hppa_machine_init(MachineClass *mc)
     mc->default_ram_size = 512 * MiB;
     mc->default_boot_order = "cd";
     mc->default_ram_id = "ram";
-}
 
-static void machine_hppa_machine_init_class_init(ObjectClass *oc, void *data)
-{
-    MachineClass *mc = MACHINE_CLASS(oc);
-    machine_hppa_machine_init(mc);
-
-    NMIClass *nc = NMI_CLASS(oc);
     nc->nmi_monitor_handler = hppa_nmi;
 }
 
-- 
2.20.1

[PATCH v2 50/50] hppa: simplify machine function names in machine.c

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
---
 hw/hppa/machine.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 724ee24795..ae0bc07e75 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -446,7 +446,7 @@ static void hppa_nmi(NMIState *n, int cpu_index, Error **errp)
     }
 }
 
-static void machine_hppa_machine_init_class_init(ObjectClass *oc, void *data)
+static void hppa_machine_init_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
     NMIClass *nc = NMI_CLASS(oc);
@@ -466,19 +466,19 @@ static void machine_hppa_machine_init_class_init(ObjectClass *oc, void *data)
     nc->nmi_monitor_handler = hppa_nmi;
 }
 
-static const TypeInfo machine_hppa_machine_init_typeinfo = {
+static const TypeInfo hppa_machine_init_typeinfo = {
     .name = MACHINE_TYPE_NAME("hppa"),
     .parent = TYPE_MACHINE,
-    .class_init = machine_hppa_machine_init_class_init,
+    .class_init = hppa_machine_init_class_init,
     .interfaces = (InterfaceInfo[]) {
         { TYPE_NMI },
         { }
     },
 };
 
-static void machine_hppa_machine_init_register_types(void)
+static void hppa_machine_init_register_types(void)
 {
-    type_register_static(&machine_hppa_machine_init_typeinfo);
+    type_register_static(&hppa_machine_init_typeinfo);
 }
 
-type_init(machine_hppa_machine_init_register_types)
+type_init(hppa_machine_init_register_types)
-- 
2.20.1

Re: [PATCH v2 12/50] hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa machine

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> DINO refers to the GSC-PCI bridge device which will soon be handled separately,
> however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated
> by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU
> MAINTAINERS file.
> 
> Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO
> and also update the machine description accordingly.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   configs/devices/hppa-softmmu/default.mak | 2 +-
>   hw/hppa/Kconfig                          | 2 +-
>   hw/hppa/machine.c                        | 2 +-
>   hw/hppa/meson.build                      | 2 +-
>   4 files changed, 4 insertions(+), 4 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 23/50] lasi: checkpatch fixes

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 02/50] dino: move registers from dino_init() to DINO_PCI_BRIDGE init function

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 44 +++++++++++++++++++++++++++++---------------
>   1 file changed, 29 insertions(+), 15 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 03/50] dino: move PCI bus initialisation to dino_pcihost_init()

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 16 +++++++++-------
>   1 file changed, 9 insertions(+), 7 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 04/50] dino: move PCI windows initialisation to dino_pcihost_init()

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 22 +++++++++++-----------
>   1 file changed, 11 insertions(+), 11 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 05/50] dino: add memory-as property containing a link to the memory address space

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 12 ++++++++++++
>   1 file changed, 12 insertions(+)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 06/50] dino: move pci_setup_iommu() to dino_pcihost_init()

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 07/50] dino: move PCI bus master address space setup to dino_pcihost_realize()

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Add a new dino_pcihost_unrealize() function to remove the address space when the
> device is unrealized.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 25 ++++++++++++++++++++-----
>   1 file changed, 20 insertions(+), 5 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 08/50] dino: move initial register configuration to new dino_pcihost_reset() function

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 11 +++++++++--
>   1 file changed, 9 insertions(+), 2 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 09/50] dino: use QOM cast instead of directly referencing parent_obj

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> Use a QOM cast in both dino_chip_read_with_attrs() and dino_chip_write_with_attrs()
> instead of directly referencing parent_obj.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 10/50] dino: return PCIBus from dino_init() using qdev_get_child_bus()

[Richard Henderson]

On 5/4/22 02:25, Mark Cave-Ayland wrote:
> This allows access to the PCI bus without having to reference parent_obj directly.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller <deller@gmx.de>
> ---
>   hw/hppa/dino.c | 7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
> index 77b8089664..d89b48493f 100644
> --- a/hw/hppa/dino.c
> +++ b/hw/hppa/dino.c
> @@ -523,14 +523,12 @@ PCIBus *dino_init(MemoryRegion *addr_space,
>   {
>       DeviceState *dev;
>       DinoState *s;
> -    PCIBus *b;
> +    PCIBus *pci_bus;
>   
>       dev = qdev_new(TYPE_DINO_PCI_HOST_BRIDGE);
>       object_property_set_link(OBJECT(dev), "memory-as", OBJECT(addr_space),
>                                &error_fatal);
>       s = DINO_PCI_HOST_BRIDGE(dev);
> -
> -    b = s->parent_obj.bus;
>       sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
>   
>       memory_region_add_subregion(addr_space, DINO_HPA,
> @@ -539,7 +537,8 @@ PCIBus *dino_init(MemoryRegion *addr_space,
>       *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
>       *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
>   
> -    return b;
> +    pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci"));
> +    return pci_bus;
>   }
>   
>   static void dino_pcihost_reset(DeviceState *dev)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 13/50] dino: change dino_init() to return the DINO device instead of PCIBus

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This is in preparation for using more qdev APIs during the configuration of the
> HPPA generic machine.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c     | 8 +++-----
>   hw/hppa/hppa_sys.h | 3 ++-
>   hw/hppa/machine.c  | 6 ++++--
>   3 files changed, 9 insertions(+), 8 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 14/50] machine.c: map DINO device during board configuration

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c    | 3 ---
>   hw/hppa/machine.c | 3 +++
>   2 files changed, 3 insertions(+), 3 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 15/50] dino.h: add defines for DINO IRQ numbers

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This is to allow the DINO IRQs to be defined as qdev GPIOs.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.h | 12 ++++++++++++
>   1 file changed, 12 insertions(+)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 15/50] dino.h: add defines for DINO IRQ numbers

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This is to allow the DINO IRQs to be defined as qdev GPIOs.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.h | 12 ++++++++++++
>   1 file changed, 12 insertions(+)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 16/50] dino: define IRQ inputs as qdev GPIOs

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 2 ++
>   hw/hppa/dino.h | 2 ++
>   2 files changed, 4 insertions(+)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 17/50] dino: wire up serial IRQ using a qdev GPIO in machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This makes it unnecessary to allocate a separate IRQ for the serial port.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c     | 8 +-------
>   hw/hppa/hppa_sys.h | 2 +-
>   hw/hppa/machine.c  | 7 ++++---
>   3 files changed, 6 insertions(+), 11 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 18/50] dino: remove unused dino_set_timer_irq() IRQ handler

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> According to the comments in dino.c the timer IRQ is unused, so remove the empty
> dino_set_timer_irq() handler function and simply pass NULL to mc146818_rtc_init()
> in machine.c instead.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c     | 10 +---------
>   hw/hppa/hppa_sys.h |  2 +-
>   hw/hppa/machine.c  |  5 ++---
>   3 files changed, 4 insertions(+), 13 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 19/50] hppa: move dino_init() from dino.c to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Now that dino_init() is completely decoupled from dino.c it can be moved to
> machine.c with the rest of the board configuration.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c     | 14 --------------
>   hw/hppa/hppa_sys.h |  2 --
>   hw/hppa/machine.c  | 12 ++++++++++++
>   3 files changed, 12 insertions(+), 16 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 20/50] dino: use numerical constant for iar0 and iar1 reset values

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This is to allow us to decouple the DINO device from the board logic. The choice
> of using a hard-coded constant (along with a comment) is to match how this is
> already done for toc_addr. If it is decided later that these values need to be
> configurable then they can easily be converted to qdev properties.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 21/50] dino: move DINO HPA constants from hppa_hardware.h to dino.h

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This is to allow us to decouple the DINO device from the board logic.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/dino.h          | 5 +++++
>   hw/hppa/hppa_hardware.h | 5 -----
>   2 files changed, 5 insertions(+), 5 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 22/50] dino: move from hw/hppa to hw/pci-host

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Move the DINO device implementation from hw/hppa to hw/pci-host so that it is
> located with all the other PCI host bridges.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   MAINTAINERS                             | 2 ++
>   hw/hppa/Kconfig                         | 2 +-
>   hw/hppa/machine.c                       | 2 +-
>   hw/hppa/meson.build                     | 2 +-
>   hw/hppa/trace-events                    | 5 -----
>   hw/pci-host/Kconfig                     | 4 ++++
>   hw/{hppa => pci-host}/dino.c            | 3 +--
>   hw/pci-host/meson.build                 | 3 +++
>   hw/pci-host/trace-events                | 5 +++++
>   {hw/hppa => include/hw/pci-host}/dino.h | 0
>   10 files changed, 18 insertions(+), 10 deletions(-)
>   rename hw/{hppa => pci-host}/dino.c (99%)
>   rename {hw/hppa => include/hw/pci-host}/dino.h (100%)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 24/50] lasi: move memory region initialisation to new lasi_init() function

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Create a new lasi_init() instance initialisation function and move the LASI
> memory region initialisation into it. Rename the existing lasi_init() function
> to lasi_initfn() for now.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h |  2 +-
>   hw/hppa/lasi.c     | 13 ++++++++++---
>   hw/hppa/machine.c  |  2 +-
>   3 files changed, 12 insertions(+), 5 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 26/50] lasi: move initialisation of iar and rtc to new lasi_reset() function

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 18 ++++++++++++------
>   1 file changed, 12 insertions(+), 6 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r!

Re: [PATCH v2 27/50] lasi: move LASIState and associated QOM structures to lasi.h

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller <deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 44 +-------------------------------------
>   hw/hppa/lasi.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 59 insertions(+), 43 deletions(-)
>   create mode 100644 hw/hppa/lasi.h
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 29/50] lasi: define IRQ inputs as qdev GPIOs

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 2 ++
>   hw/hppa/lasi.h | 2 ++
>   2 files changed, 4 insertions(+)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 30/50] lasi: use qdev GPIOs to wire up IRQs in lasi_initfn()

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 21 +++++++--------------
>   1 file changed, 7 insertions(+), 14 deletions(-)


Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 31/50] lasi: fix serial port initialisation

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> The existing code checks for serial_hd(1) but sets the LASI serial port chardev
> to serial_hd(0). Use serial_hd(1) for the LASI serial port and also set the
> serial port endian to DEVICE_BIG_ENDIAN (which also matches the endian of the
> existing serial port).
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 31/50] lasi: fix serial port initialisation

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> The existing code checks for serial_hd(1) but sets the LASI serial port chardev
> to serial_hd(0). Use serial_hd(1) for the LASI serial port and also set the
> serial port endian to DEVICE_BIG_ENDIAN (which also matches the endian of the
> existing serial port).
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 32/50] lasi: update lasi_initfn() to return LASIState

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h | 3 ++-
>   hw/hppa/lasi.c     | 4 ++--
>   hw/hppa/machine.c  | 3 ++-
>   3 files changed, 6 insertions(+), 4 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 33/50] lasi: move LAN initialisation to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c    | 7 -------
>   hw/hppa/machine.c | 5 +++++
>   2 files changed, 5 insertions(+), 7 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 34/50] lasi: move parallel port initialisation to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c    | 6 ------
>   hw/hppa/machine.c | 6 ++++++
>   2 files changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 35/50] lasi: move second serial port initialisation to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller <deller@gmx.de>
> ---
>   hw/hppa/lasi.c    | 8 --------
>   hw/hppa/machine.c | 7 +++++++
>   2 files changed, 7 insertions(+), 8 deletions(-)
> 

In that it is code movement,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

> +    if (serial_hd(1)) {
> +        /* Serial port */
> +        serial_mm_init(addr_space, LASI_UART_HPA + 0x800, 0,
> +                qdev_get_gpio_in(lasi_dev, LASI_IRQ_UART_HPA), 8000000 / 16,
> +                serial_hd(1), DEVICE_BIG_ENDIAN);
> +    }

Although I believe there's a bug: both of these serial ports are being registered at 
LASI_UART_HPA + 0x800.  I suspect this bug was hidden by the bug fixed in patch 31, in 
that serial_hd(0) should be at 0x800, and serial_hd(1) should be elsewhere.


r~

Re: [PATCH v2 36/50] lasi: move PS2 initialisation to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c    | 5 -----
>   hw/hppa/machine.c | 5 +++++
>   2 files changed, 5 insertions(+), 5 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 37/50] lasi: remove address space parameter from lasi_initfn()

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Now that all of the LASI devices are mapped by the board, this parameter is no
> longer required.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h | 2 +-
>   hw/hppa/lasi.c     | 2 +-
>   hw/hppa/machine.c  | 2 +-
>   3 files changed, 3 insertions(+), 3 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 38/50] lasi: move lasi_initfn() to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Move the simplified lasi_initfn() back to machine.c whilst also renaming it
> back to its original lasi_init() name.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h |  2 --
>   hw/hppa/lasi.c     | 10 ----------
>   hw/hppa/machine.c  | 12 +++++++++++-
>   3 files changed, 11 insertions(+), 13 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 40/50] lasi: use numerical constant for iar reset value

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This is to allow us to decouple the LASI device from the board logic. If it is
> decided later that this value needs to be configurable then it can easily be
> converted to a qdev property.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 41/50] hppa: move device headers from hppa_sys.h into individual .c files

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h | 3 ---
>   hw/hppa/lasi.h     | 4 ++++
>   hw/hppa/machine.c  | 2 ++
>   hw/hppa/pci.c      | 3 +++
>   4 files changed, 9 insertions(+), 3 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 39/50] lasi: use constants for device register offsets

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Instead of generating the offset based upon the physical address of the
> register, add constants for each of the device registers to lasi.h and
> update lasi.c to use them.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller <deller@gmx.de>
> ---
>   hw/hppa/lasi.c | 28 ++++++++++++++--------------
>   hw/hppa/lasi.h |  5 +++++
>   2 files changed, 19 insertions(+), 14 deletions(-)

Worth removing the final usages, and the old definitions in hppa_machine.h?

Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 42/50] lasi: move from hw/hppa to hw/misc

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Move the LASI device implementation from hw/hppa to hw/misc so that it is
> located with all the other miscellaneous devices.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller <deller@gmx.de>
> ---
>   MAINTAINERS                         | 2 ++
>   hw/hppa/Kconfig                     | 1 +
>   hw/hppa/machine.c                   | 2 +-
>   hw/hppa/meson.build                 | 2 +-
>   hw/hppa/trace-events                | 5 -----
>   hw/misc/Kconfig                     | 3 +++
>   hw/{hppa => misc}/lasi.c            | 3 +--
>   hw/misc/meson.build                 | 3 +++
>   hw/misc/trace-events                | 5 +++++
>   {hw/hppa => include/hw/misc}/lasi.h | 0
>   10 files changed, 17 insertions(+), 9 deletions(-)
>   rename hw/{hppa => misc}/lasi.c (99%)
>   rename {hw/hppa => include/hw/misc}/lasi.h (100%)

I don't understand hw/misc, or why this is a better categorization than hw/hppa.


r~

Re: [PATCH v2 43/50] hppa: move hppa_pci_ignore_ops from pci.c to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> The memory region only has one user which is for ensuring accesses to the ISA
> bus memory do not fault.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h |  1 -
>   hw/hppa/machine.c  | 23 +++++++++++++++++++++++
>   hw/hppa/pci.c      | 26 --------------------------
>   3 files changed, 23 insertions(+), 27 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 44/50] hppa: remove hw/hppa/pci.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> The functions and definitions in this file are not used anywhere within the
> generic hppa machine.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h   |  6 ----
>   hw/hppa/meson.build  |  2 +-
>   hw/hppa/pci.c        | 65 --------------------------------------------
>   hw/hppa/trace-events |  3 --
>   4 files changed, 1 insertion(+), 75 deletions(-)
>   delete mode 100644 hw/hppa/pci.c

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 45/50] hppa: remove unused trace-events from from hw/hppa

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Now that there are no longer any devices in hw/hppa the trace-events file is
> empty and can be removed.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/trace-events | 1 -
>   meson.build          | 1 -
>   2 files changed, 2 deletions(-)
>   delete mode 100644 hw/hppa/trace-events

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 46/50] hppa: move enable_lan() define from hppa_sys.h to machine.c

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Now that the board configuration is in one place, the define is only needed when
> wiring up the board in machine.c.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h | 2 --
>   hw/hppa/machine.c  | 3 +++
>   2 files changed, 3 insertions(+), 2 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 47/50] hppa: remove the empty hppa_sys.h file

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> This file is now just a simple wrapper that includes hppa_hardware.h so remove
> the file completely, and update its single user in machine.c to include
> hppa_hardware.h directly.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/hppa_sys.h | 8 --------
>   hw/hppa/machine.c  | 2 +-
>   2 files changed, 1 insertion(+), 9 deletions(-)
>   delete mode 100644 hw/hppa/hppa_sys.h

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 48/50] hppa: use MACHINE QOM macros for defining the hppa machine

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/machine.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 49/50] hppa: fold machine_hppa_machine_init() into machine_hppa_machine_init_class_init()

[Richard Henderson]

On 5/4/22 04:25, Mark Cave-Ayland wrote:
> There is no need for a separate function to set the machine class properties
> separately from the others.
> 
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/machine.c | 12 ++++--------
>   1 file changed, 4 insertions(+), 8 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 50/50] hppa: simplify machine function names in machine.c

[Richard Henderson]

On 5/4/22 04:26, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland<mark.cave-ayland@ilande.co.uk>
> Acked-by: Helge Deller<deller@gmx.de>
> ---
>   hw/hppa/machine.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~

Re: [PATCH v2 35/50] lasi: move second serial port initialisation to machine.c

[Mark Cave-Ayland]

On 08/05/2022 03:50, Richard Henderson wrote:

> On 5/4/22 04:25, Mark Cave-Ayland wrote:
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> Acked-by: Helge Deller <deller@gmx.de>
>> ---
>>   hw/hppa/lasi.c    | 8 --------
>>   hw/hppa/machine.c | 7 +++++++
>>   2 files changed, 7 insertions(+), 8 deletions(-)
>>
> 
> In that it is code movement,
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> 
>> +    if (serial_hd(1)) {
>> +        /* Serial port */
>> +        serial_mm_init(addr_space, LASI_UART_HPA + 0x800, 0,
>> +                qdev_get_gpio_in(lasi_dev, LASI_IRQ_UART_HPA), 8000000 / 16,
>> +                serial_hd(1), DEVICE_BIG_ENDIAN);
>> +    }
> 
> Although I believe there's a bug: both of these serial ports are being registered at 
> LASI_UART_HPA + 0x800.  I suspect this bug was hidden by the bug fixed in patch 31, 
> in that serial_hd(0) should be at 0x800, and serial_hd(1) should be elsewhere.

FWIW I nearly the made the same error myself, but they are different: serial_hd(0) is 
mapped to DINO_UART_HPA + 0x800 = 0xfff83800 whereas serial_hd(1) is mapped to 
LASI_UART_HPA + 0x800 = 0xffd05800 so I believe this is correct.


ATB,

Mark.

Re: [PATCH v2 39/50] lasi: use constants for device register offsets

[Mark Cave-Ayland]

On 08/05/2022 04:04, Richard Henderson wrote:

> On 5/4/22 04:25, Mark Cave-Ayland wrote:
>> Instead of generating the offset based upon the physical address of the
>> register, add constants for each of the device registers to lasi.h and
>> update lasi.c to use them.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> Acked-by: Helge Deller <deller@gmx.de>
>> ---
>>   hw/hppa/lasi.c | 28 ++++++++++++++--------------
>>   hw/hppa/lasi.h |  5 +++++
>>   2 files changed, 19 insertions(+), 14 deletions(-)
> 
> Worth removing the final usages, and the old definitions in hppa_machine.h?
> 
> Otherwise,
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

I did think about that, but then there are a few devices I can think of where there 
are additional comments/definitions from an external header included for reference.

My feeling for a patch like this (which is really just moving towards modern APIs) is 
to leave this for the maintainer, particularly as for people less familiar with QEMU 
they find it easier to use the physical address rather than work with memory region 
offsets.


ATB,

Mark.

Re: [PATCH v2 42/50] lasi: move from hw/hppa to hw/misc

[Mark Cave-Ayland]

On 08/05/2022 04:07, Richard Henderson wrote:

> On 5/4/22 04:25, Mark Cave-Ayland wrote:
>> Move the LASI device implementation from hw/hppa to hw/misc so that it is
>> located with all the other miscellaneous devices.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> Acked-by: Helge Deller <deller@gmx.de>
>> ---
>>   MAINTAINERS                         | 2 ++
>>   hw/hppa/Kconfig                     | 1 +
>>   hw/hppa/machine.c                   | 2 +-
>>   hw/hppa/meson.build                 | 2 +-
>>   hw/hppa/trace-events                | 5 -----
>>   hw/misc/Kconfig                     | 3 +++
>>   hw/{hppa => misc}/lasi.c            | 3 +--
>>   hw/misc/meson.build                 | 3 +++
>>   hw/misc/trace-events                | 5 +++++
>>   {hw/hppa => include/hw/misc}/lasi.h | 0
>>   10 files changed, 17 insertions(+), 9 deletions(-)
>>   rename hw/{hppa => misc}/lasi.c (99%)
>>   rename {hw/hppa => include/hw/misc}/lasi.h (100%)
> 
> I don't understand hw/misc, or why this is a better categorization than hw/hppa.

This one is a bit of a grey area at the moment. There have been some discussions 
around having a hard separation between boards and devices, so that devices live in 
one part of the directory hierarchy and boards live in another. I think possibly 
Markus was advocating but this, but of course that would involve quite some work.

The reason for leaning in this direction is that by having the device separate from 
the board then it requires uses of QOM APIs in a way that don't break this 
abstraction, which I think makes things more future-proof.

There are already quite a few machine-specific devices throughout the tree: good 
examples of this would be hw/pci-host and hw/misc where there are a number of devices 
that it doesn't make sense to wire up to anything except one particular machine, so 
we're certainly not doing anything new here.


ATB,

Mark.

Re: [PATCH v2 00/50] hppa: general improvements and tidy-ups

[Mark Cave-Ayland]

On 04/05/2022 10:25, Mark Cave-Ayland wrote:

> This patchset started off when I noticed that dino.c was accessing parent_obj
> directly rather than using a QOM cast. After fixing that I noticed quite a few
> other improvements that could be done to bring hppa up to our recommended
> coding standards.
> 
> The main aim of this patchset is to de-couple the dino and lasi devices from
> the board using QOM to handle the initialisation instead of having global
> device init functions. Included in this is switching the onboard devices
> over to use qdev GPIOs for wiring instead of directly allocating QEMU IRQs.
> 
> Along the way I've renamed the board config from CONFIG_DINO to
> CONFIG_HPPA_B160L since that better represents the machine type, and then
> used CONFIG_DINO and CONFIG_LASI for the appropriate devices which have been
> moved to hw/pci-host/dino.c and hw/misc/lasi.c respectively.
> 
> After the reorganisation it was trivial to remove hppa_sys.h and the majority
> of pci.c which wasn't being used. Finally I tidied up the use of the QOM
> machine type macros in machine.c.
> 
> The result has been lightly tested with a tiny Linux image I had lying around
> for testing my recent ESP changes, so more testing is welcome. There is a bit
> more work to be done sorting out the lasips2 device init and machine init, but
> since the patchset is already quite big I can follow up with that once this
> series has been merged.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> 
> v2:
> - Rebase onto master
> - Add R-B tag to patch 1 from Richard
> - Add A-B tag from Helge to entire series
> - Update patch 12 to use CONFIG_HPPA_B160L instead of CONFIG_HPPA_GENERIC and
>    also update the machine description
> 
> 
> Mark Cave-Ayland (50):
>    dino: checkpatch fixes
>    dino: move registers from dino_init() to DINO_PCI_BRIDGE init function
>    dino: move PCI bus initialisation to dino_pcihost_init()
>    dino: move PCI windows initialisation to dino_pcihost_init()
>    dino: add memory-as property containing a link to the memory address
>      space
>    dino: move pci_setup_iommu() to dino_pcihost_init()
>    dino: move PCI bus master address space setup to
>      dino_pcihost_realize()
>    dino: move initial register configuration to new dino_pcihost_reset()
>      function
>    dino: use QOM cast instead of directly referencing parent_obj
>    dino: return PCIBus from dino_init() using qdev_get_child_bus()
>    dino: split declarations from dino.c into dino.h
>    hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build
>      hppa machine
>    dino: change dino_init() to return the DINO device instead of PCIBus
>    machine.c: map DINO device during board configuration
>    dino.h: add defines for DINO IRQ numbers
>    dino: define IRQ inputs as qdev GPIOs
>    dino: wire up serial IRQ using a qdev GPIO in machine.c
>    dino: remove unused dino_set_timer_irq() IRQ handler
>    hppa: move dino_init() from dino.c to machine.c
>    dino: use numerical constant for iar0 and iar1 reset values
>    dino: move DINO HPA constants from hppa_hardware.h to dino.h
>    dino: move from hw/hppa to hw/pci-host
>    lasi: checkpatch fixes
>    lasi: move memory region initialisation to new lasi_init() function
>    lasi: move register memory mapping from lasi.c to machine.c
>    lasi: move initialisation of iar and rtc to new lasi_reset() function
>    lasi: move LASIState and associated QOM structures to lasi.h
>    lasi: replace lasi_get_irq() with defined constants
>    lasi: define IRQ inputs as qdev GPIOs
>    lasi: use qdev GPIOs to wire up IRQs in lasi_initfn()
>    lasi: fix serial port initialisation
>    lasi: update lasi_initfn() to return LASIState
>    lasi: move LAN initialisation to machine.c
>    lasi: move parallel port initialisation to machine.c
>    lasi: move second serial port initialisation to machine.c
>    lasi: move PS2 initialisation to machine.c
>    lasi: remove address space parameter from lasi_initfn()
>    lasi: move lasi_initfn() to machine.c
>    lasi: use constants for device register offsets
>    lasi: use numerical constant for iar reset value
>    hppa: move device headers from hppa_sys.h into individual .c files
>    lasi: move from hw/hppa to hw/misc
>    hppa: move hppa_pci_ignore_ops from pci.c to machine.c
>    hppa: remove hw/hppa/pci.c
>    hppa: remove unused trace-events from from hw/hppa
>    hppa: move enable_lan() define from hppa_sys.h to machine.c
>    hppa: remove the empty hppa_sys.h file
>    hppa: use MACHINE QOM macros for defining the hppa machine
>    hppa: fold machine_hppa_machine_init() into
>      machine_hppa_machine_init_class_init()
>    hppa: simplify machine function names in machine.c
> 
>   MAINTAINERS                              |   4 +
>   configs/devices/hppa-softmmu/default.mak |   2 +-
>   hw/hppa/Kconfig                          |   5 +-
>   hw/hppa/hppa_hardware.h                  |   5 -
>   hw/hppa/hppa_sys.h                       |  24 ---
>   hw/hppa/machine.c                        | 124 +++++++++---
>   hw/hppa/meson.build                      |   2 +-
>   hw/hppa/pci.c                            |  88 ---------
>   hw/hppa/trace-events                     |  14 --
>   hw/misc/Kconfig                          |   3 +
>   hw/{hppa => misc}/lasi.c                 | 161 ++++------------
>   hw/misc/meson.build                      |   3 +
>   hw/misc/trace-events                     |   5 +
>   hw/pci-host/Kconfig                      |   4 +
>   hw/{hppa => pci-host}/dino.c             | 231 +++++++----------------
>   hw/pci-host/meson.build                  |   3 +
>   hw/pci-host/trace-events                 |   5 +
>   include/hw/misc/lasi.h                   |  78 ++++++++
>   include/hw/pci-host/dino.h               | 146 ++++++++++++++
>   meson.build                              |   1 -
>   20 files changed, 463 insertions(+), 445 deletions(-)
>   delete mode 100644 hw/hppa/hppa_sys.h
>   delete mode 100644 hw/hppa/pci.c
>   delete mode 100644 hw/hppa/trace-events
>   rename hw/{hppa => misc}/lasi.c (60%)
>   rename hw/{hppa => pci-host}/dino.c (71%)
>   create mode 100644 include/hw/misc/lasi.h
>   create mode 100644 include/hw/pci-host/dino.h

Richard, thanks for taking the time to look over this (rather large) patchset. I've 
replied to your comments, and from what I can see the v2 patchset should be fine to 
merge. Are you happy for me to go ahead and send a PR with that and the artist fixes?

FWIW I also have another couple of tidy-up patchsets locally, one for lasips2 and 
another for the hppa machine that are based on this series. So if we do happen to 
find anything else, I can easily squash the fixes into one of the follow-up series 
rather than make this one larger.


ATB,

Mark.

Re: [PATCH v2 00/50] hppa: general improvements and tidy-ups

[Richard Henderson]

On 5/8/22 04:21, Mark Cave-Ayland wrote:
> Richard, thanks for taking the time to look over this (rather large) patchset. I've 
> replied to your comments, and from what I can see the v2 patchset should be fine to merge. 
> Are you happy for me to go ahead and send a PR with that and the artist fixes?

Yes, please do.


r~