Re: Fwd: [LIBATA] drives not detected

["Patrick Ale" <patrick.ale@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 878 bytes --]

On 2/16/07, Albert Lee <albertcc@tw.ibm.com> wrote:
:

> It's strange that your on-board Promise adapter works but the add-on
> adapter detects no devices.
>
> Could you please try reloading the pata_pdc2027x driver by
> "rmmod pata_pdc2027x; modprobe pata_pdc2027x" and send the dmesg.

Ofcourse I can :)

The output is attached as dmesg-reprobe.txt

Maybe this it totaly unrelated, but I remember that in the IDE drivers
there was an option to force the card online, even when the BIOS was
disabled. I *do* see the drives being detected and it tells me the
BIOS is installed on boot time, but you never know :)

The controller with problems is scsi11 if I see correctly. Since on
that channel no disks are attached and no "abnormal status" is
outputted, you do see this "error" twice tho, since i have nothing
connected to the secundary channel on both controllers.


Patrick

[-- Attachment #2: dmesg-reprobe.txt --]
[-- Type: text/plain, Size: 2616 bytes --]

ata9.00: disabled
ata9.01: disabled
Synchronizing SCSI cache for disk sdf:
FAILED
  status = 0, message = 00, host = 4, driver = 00
  <5>Synchronizing SCSI cache for disk sdg:
FAILED
  status = 0, message = 00, host = 4, driver = 00
  <6>ACPI: PCI interrupt for device 0000:00:0f.0 disabled
ACPI: PCI interrupt for device 0000:00:0b.0 disabled
pata_pdc2027x 0000:00:0b.0: version 0.74-ac5
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 20
pata_pdc2027x 0000:00:0b.0: PLL input clock 16754 kHz
ata11: PATA max UDMA/133 cmd 0xf88597c0 ctl 0xf8859fda bmdma 0xf8859000 irq 20
ata12: PATA max UDMA/133 cmd 0xf88595c0 ctl 0xf8859dda bmdma 0xf8859008 irq 20
scsi11 : pata_pdc2027x
scsi12 : pata_pdc2027x
ATA: abnormal status 0x8 on port 0xf88595df
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 20
pata_pdc2027x 0000:00:0f.0: PLL input clock 33508 kHz
ata13: PATA max UDMA/133 cmd 0xf98a97c0 ctl 0xf98a9fda bmdma 0xf98a9000 irq 20
ata14: PATA max UDMA/133 cmd 0xf98a95c0 ctl 0xf98a9dda bmdma 0xf98a9008 irq 20
scsi13 : pata_pdc2027x
ata13.00: ATA-7: Maxtor 6Y160P0, YAR41BW0, max UDMA/133
ata13.00: 320173056 sectors, multi 16: LBA48
ata13.01: ATA-6: WDC WD1200JB-00DUA3, 75.13B75, max UDMA/100
ata13.01: 234441648 sectors, multi 16: LBA48
ata13.00: configured for UDMA/133
ata13.01: configured for UDMA/100
scsi14 : pata_pdc2027x
ATA: abnormal status 0x78 on port 0xf98a95df
scsi 13:0:0:0: Direct-Access     ATA      Maxtor 6Y160P0   YAR4 PQ: 0 ANSI: 5
SCSI device sdf: 320173056 512-byte hdwr sectors (163929 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdf: 320173056 512-byte hdwr sectors (163929 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdf: sdf1
sd 13:0:0:0: Attached scsi disk sdf
sd 13:0:0:0: Attached scsi generic sg5 type 0
scsi 13:0:1:0: Direct-Access     ATA      WDC WD1200JB-00D 75.1 PQ: 0 ANSI: 5
SCSI device sdg: 234441648 512-byte hdwr sectors (120034 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdg: 234441648 512-byte hdwr sectors (120034 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdg: sdg1
sd 13:0:1:0: Attached scsi disk sdg
sd 13:0:1:0: Attached scsi generic sg6 type 0