From: Denis Plotnikov <den-plotnikov@yandex-team.ru>
To: qemu-devel@nongnu.org
Cc: yc-core@yandex-team.ru, mst@redhat.com
Subject: [PING][PATCH v2] vhost: make SET_VRING_ADDR, SET_FEATURES send replies
Date: Fri, 23 Jul 2021 12:59:59 +0300 [thread overview]
Message-ID: <8f3959d9-2dd8-3fc0-f350-b4ea98a10f38@yandex-team.ru> (raw)
In-Reply-To: <20210719142138.24543-1-den-plotnikov@yandex-team.ru>
[-- Attachment #1: Type: text/plain, Size: 5107 bytes --]
ping!
On 19.07.2021 17:21, Denis Plotnikov wrote:
> On vhost-user-blk migration, qemu normally sends a number of commands
> to enable logging if VHOST_USER_PROTOCOL_F_LOG_SHMFD is negotiated.
> Qemu sends VHOST_USER_SET_FEATURES to enable buffers logging and
> VHOST_USER_SET_VRING_ADDR per each started ring to enable "used ring"
> data logging.
> The issue is that qemu doesn't wait for reply from the vhost daemon
> for these commands which may result in races between qemu expectation
> of logging starting and actual login starting in vhost daemon.
>
> The race can appear as follows: on migration setup, qemu enables dirty page
> logging by sending VHOST_USER_SET_FEATURES. The command doesn't arrive to a
> vhost-user-blk daemon immediately and the daemon needs some time to turn the
> logging on internally. If qemu doesn't wait for reply, after sending the
> command, qemu may start migrate memory pages to a destination. At this time,
> the logging may not be actually turned on in the daemon but some guest pages,
> which the daemon is about to write to, may have already been transferred
> without logging to the destination. Since the logging wasn't turned on,
> those pages won't be transferred again as dirty. So we may end up with
> corrupted data on the destination.
> The same scenario is applicable for "used ring" data logging, which is
> turned on with VHOST_USER_SET_VRING_ADDR command.
>
> To resolve this issue, this patch makes qemu wait for the commands result
> explicilty if VHOST_USER_PROTOCOL_F_REPLY_ACK is negotiated and
> logging is enabled.
>
> Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
> ---
> v1 -> v2:
> * send reply only when logging is enabled [mst]
>
> v0 -> v1:
> * send reply for SET_VRING_ADDR, SET_FEATURES only [mst]
>
> hw/virtio/vhost-user.c | 37 ++++++++++++++++++++++++++++++++++---
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index ee57abe04526..133588b3961e 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -1095,6 +1095,11 @@ static int vhost_user_set_mem_table(struct vhost_dev *dev,
> return 0;
> }
>
> +static bool log_enabled(uint64_t features)
> +{
> + return !!(features & (0x1ULL << VHOST_F_LOG_ALL));
> +}
> +
> static int vhost_user_set_vring_addr(struct vhost_dev *dev,
> struct vhost_vring_addr *addr)
> {
> @@ -1105,10 +1110,21 @@ static int vhost_user_set_vring_addr(struct vhost_dev *dev,
> .hdr.size = sizeof(msg.payload.addr),
> };
>
> + bool reply_supported = virtio_has_feature(dev->protocol_features,
> + VHOST_USER_PROTOCOL_F_REPLY_ACK);
> +
> + if (reply_supported && log_enabled(msg.hdr.flags)) {
> + msg.hdr.flags |= VHOST_USER_NEED_REPLY_MASK;
> + }
> +
> if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> return -1;
> }
>
> + if (msg.hdr.flags & VHOST_USER_NEED_REPLY_MASK) {
> + return process_message_reply(dev, &msg);
> + }
> +
> return 0;
> }
>
> @@ -1288,7 +1304,8 @@ static int vhost_user_set_vring_call(struct vhost_dev *dev,
> return vhost_set_vring_file(dev, VHOST_USER_SET_VRING_CALL, file);
> }
>
> -static int vhost_user_set_u64(struct vhost_dev *dev, int request, uint64_t u64)
> +static int vhost_user_set_u64(struct vhost_dev *dev, int request, uint64_t u64,
> + bool need_reply)
> {
> VhostUserMsg msg = {
> .hdr.request = request,
> @@ -1297,23 +1314,37 @@ static int vhost_user_set_u64(struct vhost_dev *dev, int request, uint64_t u64)
> .hdr.size = sizeof(msg.payload.u64),
> };
>
> + if (need_reply) {
> + bool reply_supported = virtio_has_feature(dev->protocol_features,
> + VHOST_USER_PROTOCOL_F_REPLY_ACK);
> + if (reply_supported) {
> + msg.hdr.flags |= VHOST_USER_NEED_REPLY_MASK;
> + }
> + }
> +
> if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> return -1;
> }
>
> + if (msg.hdr.flags & VHOST_USER_NEED_REPLY_MASK) {
> + return process_message_reply(dev, &msg);
> + }
> +
> return 0;
> }
>
> static int vhost_user_set_features(struct vhost_dev *dev,
> uint64_t features)
> {
> - return vhost_user_set_u64(dev, VHOST_USER_SET_FEATURES, features);
> + return vhost_user_set_u64(dev, VHOST_USER_SET_FEATURES, features,
> + log_enabled(features));
> }
>
> static int vhost_user_set_protocol_features(struct vhost_dev *dev,
> uint64_t features)
> {
> - return vhost_user_set_u64(dev, VHOST_USER_SET_PROTOCOL_FEATURES, features);
> + return vhost_user_set_u64(dev, VHOST_USER_SET_PROTOCOL_FEATURES, features,
> + false);
> }
>
> static int vhost_user_get_u64(struct vhost_dev *dev, int request, uint64_t *u64)
[-- Attachment #2: Type: text/html, Size: 5375 bytes --]
next prev parent reply other threads:[~2021-07-23 10:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-19 14:21 [PATCH " Denis Plotnikov
2021-07-23 9:59 ` Denis Plotnikov [this message]
2021-07-29 10:56 ` [PING][PING][PATCH " Denis Plotnikov
2021-07-29 12:53 ` Philippe Mathieu-Daudé
2021-07-29 16:13 ` Stefan Hajnoczi
2021-08-03 15:05 ` [PATCH " Michael S. Tsirkin
2021-08-09 9:05 ` Denis Plotnikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8f3959d9-2dd8-3fc0-f350-b4ea98a10f38@yandex-team.ru \
--to=den-plotnikov@yandex-team.ru \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yc-core@yandex-team.ru \
--subject='Re: [PING][PATCH v2] vhost: make SET_VRING_ADDR, SET_FEATURES send replies' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.