From: Michael Cashwell <mboards@prograde.net>
To: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Cc: linux-mtd-bounces@lists.infradead.org,
linux-mtd@lists.infradead.org,
"Holger brunck" <holger.brunck@keymile.com>,
stefan.bigler@keymile.com,
"Anders Grafström" <grfstrm@users.sourceforge.net>
Subject: Re: Numonyx NOR and chip->mutex bug?
Date: Fri, 11 Feb 2011 13:03:00 -0500 [thread overview]
Message-ID: <90F81E81-DDBB-4F57-90A3-B9C55616C84B@prograde.net> (raw)
In-Reply-To: <OF7426521D.A5E8E752-ONC1257833.00648ED3-C1257833.00654F5A@transmode.se>
On Feb 10, 2011, at 1:26 PM, Joakim Tjernlund wrote:
>> hmm, Figure 31: Program Suspend/Resume Flowchart and
>> Figure 36: Erase Suspend/Resume Flowchart actually specifies a read status(0x70) before suspend(0xb0)
I see the Erase Suspend/Resume Flowchart as figure 40, not 36. The sheet info is: 320002-10 Mar 2010. What's yours?
> Furthermore, the read status has to be to the same "partition" and you have to end the resume with a read status too "If the suspended partition was placed in Read Array mode or a Program Loop"
Mine says NOT to do that. You can program or read from any OTHER partition, but trying to do that to the same one that was being erased is not valid.
My Erase Suspend/Resume Flowchart says to do a read-status (0x70) before the 0xb0 suspend. (Interesting that we weren't doing that!) The the address for both must be the same, but can be "any device address."
I don't see where they say the resume address must match the address of the erase.
-Mike
next prev parent reply other threads:[~2011-02-11 18:03 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-25 18:14 Numonyx NOR and chip->mutex bug? Michael Cashwell
2011-01-25 18:56 ` Joakim Tjernlund
2011-01-25 22:03 ` Michael Cashwell
2011-01-25 23:09 ` Joakim Tjernlund
2011-02-02 16:20 ` Michael Cashwell
2011-02-02 17:37 ` Stefan Bigler
2011-02-02 20:12 ` Joakim Tjernlund
2011-02-02 21:19 ` Michael Cashwell
2011-02-03 8:11 ` Joakim Tjernlund
2011-02-03 9:50 ` Joakim Tjernlund
2011-02-03 15:24 ` Michael Cashwell
2011-02-03 16:38 ` Stefan Bigler
2011-02-03 23:18 ` Stefan Bigler
2011-02-04 10:47 ` Joakim Tjernlund
2011-02-04 11:04 ` Stefan Bigler
2011-02-04 12:26 ` Joakim Tjernlund
2011-02-04 12:35 ` Joakim Tjernlund
2011-02-04 12:42 ` Joakim Tjernlund
2011-02-04 13:05 ` Joakim Tjernlund
2011-02-04 13:25 ` Joakim Tjernlund
2011-02-04 16:45 ` Stefan Bigler
2011-02-04 16:55 ` Joakim Tjernlund
2011-02-04 17:09 ` Michael Cashwell
[not found] ` <OF42EF <F66AF016-8A2B-4116-BE49-CE05B91BE50F@prograde.net>
[not found] ` <OF42EF<F66AF016-8A2B-4116-BE49-CE05B91BE50F@prograde.net>
2011-02-05 10:29 ` Joakim Tjernlund
2011-02-05 19:19 ` Michael Cashwell
2011-02-05 21:47 ` Michael Cashwell
2011-02-06 9:46 ` Joakim Tjernlund
2011-02-06 15:49 ` Michael Cashwell
2011-02-06 17:29 ` Joakim Tjernlund
2011-02-06 21:13 ` Michael Cashwell
[not found] ` <OF2C1ABD39 <4D5005E4.1040506@keymile.com>
[not found] ` <OFFF2C6D34.91E5D6C3-ONC1257 <96BD3889-E8AD-408D-8275-ED1A5FD55F1B@prograde.net>
[not found] ` <OF2C1ABD39<4D5005E4.1040506@keymile.com>
[not found] ` <OFFF2C6D34.91E5D6C3-ONC1257<96BD3889-E8AD-408D-8275-ED1A5FD55F1B@prograde.net>
[not found] ` <OF9738D658.F46<4C117A67-5057-4ACD-8EBE-04E9C782570C@prograde.net>
[not found] ` <OF6D40AC82.1008D3DD-ONC1 <4D53E660.4020305@users.sourceforge.net>
2011-02-06 21:20 ` Joakim Tjernlund
2011-02-07 14:47 ` Stefan Bigler
2011-02-07 15:01 ` Joakim Tjernlund
2011-02-07 15:46 ` Michael Cashwell
2011-02-07 15:52 ` Stefan Bigler
2011-02-07 16:22 ` Joakim Tjernlund
2011-02-07 16:46 ` Michael Cashwell
2011-02-07 17:08 ` Stefan Bigler
2011-02-07 19:04 ` Michael Cashwell
2011-02-09 19:52 ` Michael Cashwell
2011-02-09 20:13 ` Joakim Tjernlund
2011-02-09 21:59 ` Michael Cashwell
2011-02-10 13:21 ` Anders Grafström
2011-02-10 14:04 ` Joakim Tjernlund
2011-02-10 15:04 ` Joakim Tjernlund
2011-02-10 15:59 ` Michael Cashwell
2011-02-10 16:05 ` Joakim Tjernlund
2011-02-10 16:41 ` Michael Cashwell
2011-02-10 16:46 ` Joakim Tjernlund
2011-02-10 17:02 ` Joakim Tjernlund
2011-02-10 17:10 ` Michael Cashwell
2011-02-10 17:20 ` Joakim Tjernlund
2011-02-10 17:47 ` Joakim Tjernlund
2011-02-10 18:26 ` Joakim Tjernlund
2011-02-11 18:03 ` Michael Cashwell [this message]
2011-02-12 10:47 ` Joakim Tjernlund
2011-02-14 15:59 ` Michael Cashwell
2011-02-14 15:44 ` Michael Cashwell
2011-02-10 16:43 ` Michael Cashwell
2011-02-10 17:54 ` Anders Grafström
2011-02-11 15:05 ` Michael Cashwell
2011-02-11 15:39 ` Joakim Tjernlund
2011-02-14 16:15 ` Michael Cashwell
2011-02-11 17:00 ` Joakim Tjernlund
2011-02-10 15:43 ` Michael Cashwell
2011-02-10 15:51 ` Joakim Tjernlund
2011-02-24 10:50 ` Joakim Tjernlund
2011-02-24 11:36 ` Joakim Tjernlund
2011-02-24 14:28 ` Michael Cashwell
2011-02-10 14:53 ` Joakim Tjernlund
2011-02-06 9:40 ` Joakim Tjernlund
2011-02-06 14:55 ` Michael Cashwell
2011-02-07 15:10 ` Michael Cashwell
2011-02-07 15:48 ` Joakim Tjernlund
2011-02-03 13:24 ` Michael Cashwell
2011-02-03 14:01 ` Joakim Tjernlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=90F81E81-DDBB-4F57-90A3-B9C55616C84B@prograde.net \
--to=mboards@prograde.net \
--cc=grfstrm@users.sourceforge.net \
--cc=holger.brunck@keymile.com \
--cc=joakim.tjernlund@transmode.se \
--cc=linux-mtd-bounces@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=stefan.bigler@keymile.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.