All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Intel-gfx@lists.freedesktop.org, "Xu, Terrence" <terrence.xu@intel.com>
Subject: Re: [PATCH] drm/i915/vgpu: Neuter forcewakes for VGPU more thouroughly
Date: Mon, 13 Mar 2017 09:47:15 +0000	[thread overview]
Message-ID: <92ee59f4-8fc2-bbc7-4306-3cfe4e270b6d@linux.intel.com> (raw)
In-Reply-To: <20170313093727.ek3nn2osnsvfad4s@zhen-hp.sh.intel.com>


On 13/03/2017 09:37, Zhenyu Wang wrote:
> On 2017.03.13 09:26:26 +0000, Tvrtko Ursulin wrote:
>>
>> On 10/03/2017 10:09, Chris Wilson wrote:
>>> On Fri, Mar 10, 2017 at 09:57:47AM +0000, Tvrtko Ursulin wrote:
>>>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>>
>>>> If we avoid initializing forcewake domains when running as
>>>> a guest, and also use gen2 mmio accessors in that case, we
>>>> can avoid the timer traffic and any looping through the
>>>> forcewake code which is currently just so it can end up in
>>>> the no-op forcewake implementation.
>>>>
>>>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>> Cc: Weinan Li <weinan.z.li@intel.com>
>>>> Cc: Chris Wilson <chris@chris-wilson.co.uk>
>>>> ---
>>>>  drivers/gpu/drm/i915/intel_uncore.c | 76 +++++++++++++------------------------
>>>>  1 file changed, 27 insertions(+), 49 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
>>>> index 71b9b387ad04..09f5f02d7901 100644
>>>> --- a/drivers/gpu/drm/i915/intel_uncore.c
>>>> +++ b/drivers/gpu/drm/i915/intel_uncore.c
>>>> @@ -138,13 +138,6 @@ fw_domains_put(struct drm_i915_private *dev_priv, enum forcewake_domains fw_doma
>>>>  }
>>>>
>>>>  static void
>>>> -vgpu_fw_domains_nop(struct drm_i915_private *dev_priv,
>>>> -		    enum forcewake_domains fw_domains)
>>>> -{
>>>> -	/* Guest driver doesn't need to takes care forcewake. */
>>>> -}
>>>> -
>>>> -static void
>>>>  fw_domains_posting_read(struct drm_i915_private *dev_priv)
>>>>  {
>>>>  	struct intel_uncore_forcewake_domain *d;
>>>> @@ -1187,7 +1180,7 @@ static void fw_domain_init(struct drm_i915_private *dev_priv,
>>>>
>>>>  static void intel_uncore_fw_domains_init(struct drm_i915_private *dev_priv)
>>>>  {
>>>> -	if (INTEL_INFO(dev_priv)->gen <= 5)
>>>> +	if (INTEL_GEN(dev_priv) <= 5 || intel_vgpu_active(dev_priv))
>>>
>>> Make these separate ifs, they aren't semantically related so be verbose.
>>>
>>>>  		return;
>>>>
>>>>  	if (IS_GEN9(dev_priv)) {
>>>> @@ -1273,11 +1266,6 @@ static void intel_uncore_fw_domains_init(struct drm_i915_private *dev_priv)
>>>>  			       FORCEWAKE, FORCEWAKE_ACK);
>>>>  	}
>>>>
>>>> -	if (intel_vgpu_active(dev_priv)) {
>>>> -		dev_priv->uncore.funcs.force_wake_get = vgpu_fw_domains_nop;
>>>> -		dev_priv->uncore.funcs.force_wake_put = vgpu_fw_domains_nop;
>>>> -	}
>>>> -
>>>>  	/* All future platforms are expected to require complex power gating */
>>>>  	WARN_ON(dev_priv->uncore.fw_domains == 0);
>>>>  }
>>>> @@ -1327,22 +1315,22 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
>>>>  	dev_priv->uncore.pmic_bus_access_nb.notifier_call =
>>>>  		i915_pmic_bus_access_notifier;
>>>>
>>>> -	switch (INTEL_INFO(dev_priv)->gen) {
>>>> -	default:
>>>> -	case 9:
>>>> -		ASSIGN_FW_DOMAINS_TABLE(__gen9_fw_ranges);
>>>> -		ASSIGN_WRITE_MMIO_VFUNCS(fwtable);
>>>> -		ASSIGN_READ_MMIO_VFUNCS(fwtable);
>>>> -		if (HAS_DECOUPLED_MMIO(dev_priv)) {
>>>> -			dev_priv->uncore.funcs.mmio_readl =
>>>> -						gen9_decoupled_read32;
>>>> -			dev_priv->uncore.funcs.mmio_readq =
>>>> -						gen9_decoupled_read64;
>>>> -			dev_priv->uncore.funcs.mmio_writel =
>>>> -						gen9_decoupled_write32;
>>>> +	if (IS_GEN(dev_priv, 2, 4) || intel_vgpu_active(dev_priv)) {
>>>
>>> Ok, this doesn't look too bad.
>>>
>>> Do the gvt-g hosts in CI now provide coverage for us of vgpu paths?
>>
>> No idea.
>>
>> Adding Zhenyu. So this patch avoids burning CPU cycles in guests and
>> scheduling timers when all of that ends up in the dummy/no-op forcewake
>> implementation.
>>
>> If interesting to you, would it be easy for you to test it or how should we
>> proceed?
>>
>
> Patch looks fine to me. I can apply it for our QA testing if required.

That would be good I think, thank you. When it has been cleared that it 
actually works and doesn't break anything we can then merge it.

Regards,

Tvrtko

> About CI for gvt, I think Terrence is still working but don't know how far it goes now.
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-03-13  9:47 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-10  9:57 [PATCH] drm/i915/vgpu: Neuter forcewakes for VGPU more thouroughly Tvrtko Ursulin
2017-03-10 10:09 ` Chris Wilson
2017-03-10 13:05   ` Mika Kuoppala
2017-03-13  9:26   ` Tvrtko Ursulin
2017-03-13  9:37     ` Zhenyu Wang
2017-03-13  9:47       ` Tvrtko Ursulin [this message]
2017-03-13  9:59         ` Chris Wilson
2017-03-17  9:29       ` Tvrtko Ursulin
2017-03-17  9:42         ` Xu, Terrence
2017-03-17  9:54           ` Tvrtko Ursulin
2017-03-10 12:48 ` ✓ Fi.CI.BAT: success for " Patchwork
2017-03-17  9:55   ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=92ee59f4-8fc2-bbc7-4306-3cfe4e270b6d@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    --cc=terrence.xu@intel.com \
    --cc=zhenyuw@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.