All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans Verkuil <hansverk@cisco.com>
To: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org, linux-input@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, lars@opdenkamp.eu,
	linux@arm.linux.org.uk, Hans Verkuil <hansverk@cisco.com>,
	Kamil Debski <kamil@wypas.org>,
	Hans Verkuil <hans.verkuil@cisco.com>
Subject: [PATCHv10 14/16] cec: adv7511: add cec support.
Date: Thu, 12 Nov 2015 13:21:43 +0100	[thread overview]
Message-ID: <93201b63e6862f7089643bb0d5d8dd86b237995d.1447329279.git.hansverk@cisco.com> (raw)
In-Reply-To: <cover.1447329279.git.hansverk@cisco.com>
In-Reply-To: <cover.1447329279.git.hansverk@cisco.com>

From: Hans Verkuil <hans.verkuil@cisco.com>

Add CEC support to the adv7511 driver.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/i2c/adv7511.c | 364 +++++++++++++++++++++++++++++++++++++++++++-
 include/media/adv7511.h     |   6 +-
 2 files changed, 358 insertions(+), 12 deletions(-)

diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
index e4900df..dee73a6 100644
--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -33,6 +33,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dv-timings.h>
 #include <media/adv7511.h>
+#include <media/cec.h>
 
 static int debug;
 module_param(debug, int, 0644);
@@ -59,6 +60,8 @@ MODULE_LICENSE("GPL v2");
 #define ADV7511_MIN_PIXELCLOCK 20000000
 #define ADV7511_MAX_PIXELCLOCK 225000000
 
+#define ADV7511_MAX_ADDRS (3)
+
 /*
 **********************************************************************
 *
@@ -90,12 +93,19 @@ struct adv7511_state {
 	struct v4l2_ctrl_handler hdl;
 	int chip_revision;
 	u8 i2c_edid_addr;
-	u8 i2c_cec_addr;
 	u8 i2c_pktmem_addr;
+	u8 i2c_cec_addr;
+
+	struct i2c_client *i2c_cec;
+	u8   cec_addr[ADV7511_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
+
 	/* Is the adv7511 powered on? */
 	bool power_on;
 	/* Did we receive hotplug and rx-sense signals? */
 	bool have_monitor;
+	bool enabled_irq;
 	/* timings from s_dv_timings */
 	struct v4l2_dv_timings dv_timings;
 	u32 fmt_code;
@@ -225,7 +235,7 @@ static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
 	return ret;
 }
 
-static inline void adv7511_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf)
+static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	int i;
@@ -240,6 +250,34 @@ static inline void adv7511_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf)
 		v4l2_err(sd, "%s: i2c read error\n", __func__);
 }
 
+static inline int adv7511_cec_read(struct v4l2_subdev *sd, u8 reg)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	return i2c_smbus_read_byte_data(state->i2c_cec, reg);
+}
+
+static int adv7511_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	int ret;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		ret = i2c_smbus_write_byte_data(state->i2c_cec, reg, val);
+		if (ret == 0)
+			return 0;
+	}
+	v4l2_err(sd, "%s: I2C Write Problem\n", __func__);
+	return ret;
+}
+
+static inline int adv7511_cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask,
+				   u8 val)
+{
+	return adv7511_cec_write(sd, reg, (adv7511_cec_read(sd, reg) & mask) | val);
+}
+
 static int adv7511_pktmem_rd(struct v4l2_subdev *sd, u8 reg)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
@@ -413,16 +451,28 @@ static const struct v4l2_ctrl_ops adv7511_ctrl_ops = {
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static void adv7511_inv_register(struct v4l2_subdev *sd)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
+
 	v4l2_info(sd, "0x000-0x0ff: Main Map\n");
+	if (state->i2c_cec)
+		v4l2_info(sd, "0x100-0x1ff: CEC Map\n");
 }
 
 static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
+
 	reg->size = 1;
 	switch (reg->reg >> 8) {
 	case 0:
 		reg->val = adv7511_rd(sd, reg->reg & 0xff);
 		break;
+	case 1:
+		if (state->i2c_cec) {
+			reg->val = adv7511_cec_read(sd, reg->reg & 0xff);
+			break;
+		}
+		/* fall through */
 	default:
 		v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
 		adv7511_inv_register(sd);
@@ -433,10 +483,18 @@ static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *
 
 static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
+
 	switch (reg->reg >> 8) {
 	case 0:
 		adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff);
 		break;
+	case 1:
+		if (state->i2c_cec) {
+			adv7511_cec_write(sd, reg->reg & 0xff, reg->val & 0xff);
+			break;
+		}
+		/* fall through */
 	default:
 		v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
 		adv7511_inv_register(sd);
@@ -524,6 +582,7 @@ static int adv7511_log_status(struct v4l2_subdev *sd)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	struct adv7511_state_edid *edid = &state->edid;
+	int i;
 
 	static const char * const states[] = {
 		"in reset",
@@ -593,7 +652,23 @@ static int adv7511_log_status(struct v4l2_subdev *sd)
 	else
 		v4l2_info(sd, "no timings set\n");
 	v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr);
+
+	if (state->i2c_cec == NULL)
+		return 0;
+
 	v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr);
+
+	v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
+			"enabled" : "disabled");
+	if (state->cec_enabled_adap) {
+		for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
+			bool is_valid = state->cec_valid_addrs & (1 << i);
+
+			if (is_valid)
+				v4l2_info(sd, "CEC Logical Address: 0x%x\n",
+					  state->cec_addr[i]);
+		}
+	}
 	v4l2_info(sd, "i2c pktmem addr: 0x%x\n", state->i2c_pktmem_addr);
 	return 0;
 }
@@ -651,15 +726,139 @@ static int adv7511_s_power(struct v4l2_subdev *sd, int on)
 	return true;
 }
 
+static unsigned adv7511_cec_available_log_addrs(struct v4l2_subdev *sd)
+{
+	return ADV7511_MAX_ADDRS;
+}
+
+static int adv7511_cec_enable(struct v4l2_subdev *sd, bool enable)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	if (state->i2c_cec == NULL)
+		return -EIO;
+
+	if (!state->cec_enabled_adap && enable) {
+		/* power up cec section */
+		adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x01);
+		/* legacy mode and clear all rx buffers */
+		adv7511_cec_write(sd, 0x4a, 0x07);
+		adv7511_cec_write(sd, 0x4a, 0);
+		adv7511_cec_write_and_or(sd, 0x11, 0xfe, 0); /* initially disable tx */
+		/* enabled irqs: */
+		/* tx: ready */
+		/* tx: arbitration lost */
+		/* tx: retry timeout */
+		/* rx: ready 1 */
+		if (state->enabled_irq)
+			adv7511_wr_and_or(sd, 0x95, 0xc0, 0x39);
+	} else if (state->cec_enabled_adap && !enable) {
+		if (state->enabled_irq)
+			adv7511_wr_and_or(sd, 0x95, 0xc0, 0x00);
+		/* disable address mask 1-3 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0x00);
+		/* power down cec section */
+		adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x00);
+		state->cec_valid_addrs = 0;
+	}
+	state->cec_enabled_adap = enable;
+	return 0;
+}
+
+static int adv7511_cec_log_addr(struct v4l2_subdev *sd, u8 addr)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	unsigned i, free_idx = ADV7511_MAX_ADDRS;
+
+	if (!state->cec_enabled_adap)
+		return -EIO;
+
+	if (addr == CEC_LOG_ADDR_INVALID) {
+		adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0);
+		state->cec_valid_addrs = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
+		bool is_valid = state->cec_valid_addrs & (1 << i);
+
+		if (free_idx == ADV7511_MAX_ADDRS && !is_valid)
+			free_idx = i;
+		if (is_valid && state->cec_addr[i] == addr)
+			return 0;
+	}
+	if (i == ADV7511_MAX_ADDRS) {
+		i = free_idx;
+		if (i == ADV7511_MAX_ADDRS)
+			return -ENXIO;
+	}
+	state->cec_addr[i] = addr;
+	state->cec_valid_addrs |= 1 << i;
+
+	switch (i) {
+	case 0:
+		/* enable address mask 0 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0xef, 0x10);
+		/* set address for mask 0 */
+		adv7511_cec_write_and_or(sd, 0x4c, 0xf0, addr);
+		break;
+	case 1:
+		/* enable address mask 1 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0xdf, 0x20);
+		/* set address for mask 1 */
+		adv7511_cec_write_and_or(sd, 0x4c, 0x0f, addr << 4);
+		break;
+	case 2:
+		/* enable address mask 2 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0xbf, 0x40);
+		/* set address for mask 1 */
+		adv7511_cec_write_and_or(sd, 0x4d, 0xf0, addr);
+		break;
+	}
+	return 0;
+}
+
+static int adv7511_cec_transmit(struct v4l2_subdev *sd, u32 timeout_ms,
+				u8 retries, struct cec_msg *msg)
+{
+	u8 len = msg->len;
+	unsigned i;
+
+	v4l2_dbg(1, debug, sd, "%s: len %d\n", __func__, len);
+
+	if (len > 16) {
+		v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
+		return -EINVAL;
+	}
+
+	/* blocking, clear cec tx irq status */
+	adv7511_wr_and_or(sd, 0x97, 0xc7, 0x38);
+
+	/* write data */
+	for (i = 0; i < len; i++)
+		adv7511_cec_write(sd, i, msg->msg[i]);
+
+	/* set length (data + header) */
+	adv7511_cec_write(sd, 0x10, len);
+	/* start transmit, enable tx */
+	adv7511_cec_write(sd, 0x11, 0x01);
+	return 0;
+}
+
 /* Enable interrupts */
 static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
 	u8 irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT;
 	u8 irqs_rd;
 	int retries = 100;
 
 	v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");
 
+	if (state->enabled_irq == enable)
+		return;
+	state->enabled_irq = enable;
+
 	/* The datasheet says that the EDID ready interrupt should be
 	   disabled if there is no hotplug. */
 	if (!enable)
@@ -667,6 +866,9 @@ static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
 	else if (adv7511_have_hotplug(sd))
 		irqs |= MASK_ADV7511_EDID_RDY_INT;
 
+	if (state->cec_enabled_adap)
+		adv7511_wr_and_or(sd, 0x95, 0xc0, enable ? 0x39 : 0x00);
+
 	/*
 	 * This i2c write can fail (approx. 1 in 1000 writes). But it
 	 * is essential that this register is correct, so retry it
@@ -685,24 +887,82 @@ static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
 	v4l2_err(sd, "Could not set interrupts: hw failure?\n");
 }
 
+static void adv_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
+{
+	if ((adv7511_cec_read(sd, 0x11) & 0x01) == 0) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
+		return;
+	}
+
+	if (tx_raw_status & 0x10) {
+		v4l2_dbg(1, debug, sd,
+			 "%s: tx raw: arbitration lost\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+	if (tx_raw_status & 0x08) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_RETRY_TIMEOUT);
+		return;
+	}
+	if (tx_raw_status & 0x20) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_OK);
+		return;
+	}
+}
+
 /* Interrupt handler */
 static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 {
 	u8 irq_status;
+	u8 cec_irq;
 
 	/* disable interrupts to prevent a race condition */
 	adv7511_set_isr(sd, false);
 	irq_status = adv7511_rd(sd, 0x96);
+	cec_irq = adv7511_rd(sd, 0x97);
 	/* clear detected interrupts */
 	adv7511_wr(sd, 0x96, irq_status);
+	adv7511_wr(sd, 0x97, cec_irq);
 
-	v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status);
+	v4l2_dbg(1, debug, sd, "%s: irq 0x%x, cec-irq 0x%x\n", __func__,
+		 irq_status, cec_irq);
 
 	if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT))
 		adv7511_check_monitor_present_status(sd);
 	if (irq_status & MASK_ADV7511_EDID_RDY_INT)
 		adv7511_check_edid_status(sd);
 
+	if (cec_irq & 0x38)
+		adv_cec_tx_raw_status(sd, cec_irq);
+
+	if (cec_irq & 1) {
+		struct cec_msg msg;
+
+		msg.len = adv7511_cec_read(sd, 0x25) & 0x1f;
+
+		v4l2_dbg(1, debug, sd, "%s: cec msg len %d\n", __func__,
+			 msg.len);
+
+		if (msg.len > 16)
+			msg.len = 16;
+
+		if (msg.len) {
+			u8 i;
+
+			for (i = 0; i < msg.len; i++)
+				msg.msg[i] = adv7511_cec_read(sd, i + 0x15);
+
+			adv7511_cec_write(sd, 0x4a, 1); /* toggle to re-enable rx 1 */
+			adv7511_cec_write(sd, 0x4a, 0);
+			v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_RX_MSG, &msg);
+		}
+	}
+
 	/* enable interrupts */
 	adv7511_set_isr(sd, true);
 
@@ -808,6 +1068,13 @@ static const struct v4l2_subdev_video_ops adv7511_video_ops = {
 	.g_dv_timings = adv7511_g_dv_timings,
 };
 
+static const struct v4l2_subdev_cec_ops adv7511_cec_ops = {
+	.available_log_addrs = adv7511_cec_available_log_addrs,
+	.enable = adv7511_cec_enable,
+	.log_addr = adv7511_cec_log_addr,
+	.transmit = adv7511_cec_transmit,
+};
+
 /* ------------------------------ AUDIO OPS ------------------------------ */
 static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable)
 {
@@ -1138,6 +1405,7 @@ static const struct v4l2_subdev_ops adv7511_ops = {
 	.pad  = &adv7511_pad_ops,
 	.video = &adv7511_video_ops,
 	.audio = &adv7511_audio_ops,
+	.cec  = &adv7511_cec_ops,
 };
 
 /* ----------------------------------------------------------------------- */
@@ -1193,6 +1461,7 @@ static void adv7511_edid_handler(struct work_struct *work)
 	/* We failed to read the EDID, so send an event for this. */
 	ed.present = false;
 	ed.segment = adv7511_rd(sd, 0xc4);
+	ed.phys_addr = 0xffff;
 	v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
 	v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
 }
@@ -1333,10 +1602,36 @@ static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment)
 	return !memcmp(data, hdmi_header, sizeof(hdmi_header));
 }
 
+static int get_edid_spa_location(const u8 *edid)
+{
+	u8 d;
+
+	if (edid[0x7e] != 1 || edid[0x80] != 0x02 || edid[0x81] != 0x03)
+		return -1;
+
+	/* search Vendor Specific Data Block (tag 3) */
+	d = edid[0x82] & 0x7f;
+	if (d > 4) {
+		int i = 0x84;
+		int end = 0x80 + d;
+
+		do {
+			u8 tag = edid[i] >> 5;
+			u8 len = edid[i] & 0x1f;
+
+			if (tag == 3 && len >= 5)
+				return i + 4;
+			i += len + 1;
+		} while (i < end);
+	}
+	return -1;
+}
+
 static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	u8 edidRdy = adv7511_rd(sd, 0xc5);
+	int offset;
 
 	v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
 			 __func__, EDID_MAX_RETRIES - state->edid.read_retries);
@@ -1382,6 +1677,12 @@ static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
 
 		v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);
 		state->edid.complete = true;
+		offset = get_edid_spa_location(state->edid.data);
+		if (offset > 0)
+			ed.phys_addr = (state->edid.data[offset] << 8) |
+					state->edid.data[offset + 1];
+		else
+			ed.phys_addr = 0xffff;
 
 		/* report when we have all segments
 		   but report only for segment 0
@@ -1403,11 +1704,14 @@ static void adv7511_init_setup(struct v4l2_subdev *sd)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	struct adv7511_state_edid *edid = &state->edid;
+	u32 cec_clk = state->pdata.cec_clk;
+	u8 ratio;
 
 	v4l2_dbg(1, debug, sd, "%s\n", __func__);
 
 	/* clear all interrupts */
 	adv7511_wr(sd, 0x96, 0xff);
+	adv7511_wr(sd, 0x97, 0xff);
 	/*
 	 * Stop HPD from resetting a lot of registers.
 	 * It might leave the chip in a partly un-initialized state,
@@ -1419,6 +1723,25 @@ static void adv7511_init_setup(struct v4l2_subdev *sd)
 	adv7511_set_isr(sd, false);
 	adv7511_s_stream(sd, false);
 	adv7511_s_audio_stream(sd, false);
+
+	if (state->i2c_cec == NULL)
+		return;
+
+	v4l2_dbg(1, debug, sd, "%s: cec_clk %d\n", __func__, cec_clk);
+
+	/* cec soft reset */
+	adv7511_cec_write(sd, 0x50, 0x01);
+	adv7511_cec_write(sd, 0x50, 0x00);
+
+	/* legacy mode */
+	adv7511_cec_write(sd, 0x4a, 0x00);
+
+	if (cec_clk % 750000 != 0)
+		v4l2_err(sd, "%s: cec_clk %d, not multiple of 750 Khz\n",
+			 __func__, cec_clk);
+
+	ratio = (cec_clk / 750000) - 1;
+	adv7511_cec_write(sd, 0x4e, ratio << 2);
 }
 
 static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id)
@@ -1495,26 +1818,47 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *
 	chip_id[0] = adv7511_rd(sd, 0xf5);
 	chip_id[1] = adv7511_rd(sd, 0xf6);
 	if (chip_id[0] != 0x75 || chip_id[1] != 0x11) {
-		v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]);
+		v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0],
+			 chip_id[1]);
 		err = -EIO;
 		goto err_entity;
 	}
 
-	state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1);
+	state->i2c_edid = i2c_new_dummy(client->adapter,
+					state->i2c_edid_addr >> 1);
 	if (state->i2c_edid == NULL) {
 		v4l2_err(sd, "failed to register edid i2c client\n");
 		err = -ENOMEM;
 		goto err_entity;
 	}
 
+	adv7511_wr(sd, 0xe1, state->i2c_cec_addr);
+	if (state->pdata.cec_clk < 3000000 ||
+	    state->pdata.cec_clk > 100000000) {
+		v4l2_err(sd, "%s: cec_clk %u outside range, disabling cec\n",
+				__func__, state->pdata.cec_clk);
+		state->pdata.cec_clk = 0;
+	}
+
+	if (state->pdata.cec_clk) {
+		state->i2c_cec = i2c_new_dummy(client->adapter,
+					       state->i2c_cec_addr >> 1);
+		if (state->i2c_cec == NULL) {
+			v4l2_err(sd, "failed to register cec i2c client\n");
+			goto err_unreg_edid;
+		}
+		adv7511_wr(sd, 0xe2, 0x00); /* power up cec section */
+	} else {
+		adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
+	}
+
 	state->i2c_pktmem = i2c_new_dummy(client->adapter, state->i2c_pktmem_addr >> 1);
 	if (state->i2c_pktmem == NULL) {
 		v4l2_err(sd, "failed to register pktmem i2c client\n");
 		err = -ENOMEM;
-		goto err_unreg_edid;
+		goto err_unreg_cec;
 	}
 
-	adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
 	state->work_queue = create_singlethread_workqueue(sd->name);
 	if (state->work_queue == NULL) {
 		v4l2_err(sd, "could not create workqueue\n");
@@ -1534,6 +1878,9 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *
 
 err_unreg_pktmem:
 	i2c_unregister_device(state->i2c_pktmem);
+err_unreg_cec:
+	if (state->i2c_cec)
+		i2c_unregister_device(state->i2c_cec);
 err_unreg_edid:
 	i2c_unregister_device(state->i2c_edid);
 err_entity:
@@ -1555,9 +1902,12 @@ static int adv7511_remove(struct i2c_client *client)
 	v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
 		 client->addr << 1, client->adapter->name);
 
+	adv7511_set_isr(sd, false);
 	adv7511_init_setup(sd);
 	cancel_delayed_work(&state->edid_handler);
 	i2c_unregister_device(state->i2c_edid);
+	if (state->i2c_cec)
+		i2c_unregister_device(state->i2c_cec);
 	i2c_unregister_device(state->i2c_pktmem);
 	destroy_workqueue(state->work_queue);
 	v4l2_device_unregister_subdev(sd);
diff --git a/include/media/adv7511.h b/include/media/adv7511.h
index d83b91d..61c3d71 100644
--- a/include/media/adv7511.h
+++ b/include/media/adv7511.h
@@ -32,11 +32,7 @@ struct adv7511_monitor_detect {
 struct adv7511_edid_detect {
 	int present;
 	int segment;
-};
-
-struct adv7511_cec_arg {
-	void *arg;
-	u32 f_flags;
+	uint16_t phys_addr;
 };
 
 struct adv7511_platform_data {
-- 
2.6.2


  parent reply	other threads:[~2015-11-12 12:22 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-12 12:21 [PATCHv10 00/16] HDMI CEC framework Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 01/16] dts: exynos4*: add HDMI CEC pin definition to pinctrl Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 02/16] dts: exynos4: add node for the HDMI CEC device Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 03/16] dts: exynos4412-odroid*: enable " Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 04/16] input.h: add BUS_CEC type Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 05/16] HID: add HDMI CEC specific keycodes Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 06/16] rc: Add HDMI CEC protocol handling Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 07/16] cec: add HDMI CEC framework Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 08/16] cec: add compat32 ioctl support Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 09/16] cec.txt: add CEC framework documentation Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 10/16] DocBook/media: add CEC documentation Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 11/16] v4l2-subdev: add HDMI CEC ops Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 12/16] cec: adv7604: add cec support Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 13/16] cec: adv7842: " Hans Verkuil
2015-11-12 12:21 ` Hans Verkuil [this message]
2015-11-12 12:21 ` [PATCHv10 15/16] cec: s5p-cec: Add s5p-cec driver Hans Verkuil
2015-11-12 12:21 ` [PATCHv10 16/16] cobalt: add cec support Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=93201b63e6862f7089643bb0d5d8dd86b237995d.1447329279.git.hansverk@cisco.com \
    --to=hansverk@cisco.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hans.verkuil@cisco.com \
    --cc=kamil@wypas.org \
    --cc=lars@opdenkamp.eu \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.