Re: [PATCH] net: usb: Correct PHY handling of smsc95xx

[Martyn Welch <martyn.welch@collabora.com>]

On Mon, 2021-11-29 at 15:16 +0100, Ferry Toth wrote:
> Hi,
> Op 29-11-2021 om 13:08 schreef Martyn Welch:
>  
> > On Sat, 2021-11-27 at 18:48 +0100, Ferry Toth wrote:
> >  
> > > 
> > > The patch introduces a new error on each unplug:
> > > 
> > > usb 1-1: USB disconnect, device number 2
> > > usb 1-1.1: USB disconnect, device number 3
> > > smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-xhci-hcd.1.auto-
> > > 1.1, 
> > > smsc95xx USB 2.0 Ethernet
> > > smsc95xx 1-1.1:1.0 eth0: Link is Down
> > > smsc95xx 1-1.1:1.0 eth0: Failed to read reg index 0x00000114: -19
> > > smsc95xx 1-1.1:1.0 eth0: Error reading MII_ACCESS
> > > smsc95xx 1-1.1:1.0 eth0: __smsc95xx_mdio_read: MII is busy
> > > smsc95xx 1-1.1:1.0 eth0: Failed to read reg index 0x00000114: -19
> > > smsc95xx 1-1.1:1.0 eth0: Error reading MII_ACCESS
> > > smsc95xx 1-1.1:1.0 eth0: __smsc95xx_mdio_read: MII is busy
> > > smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
> > > 
> > Agh! Somehow missed that. I'm looking into it...
>  That would be great!
>  

They appear as a result of phy_disconnect() being called in unbind()
when the hardware has already been disconnected (which is kinda likely
to physically be the case with USB devices...). The PHY is not going to
be accessible, but such calls *are* needed for instances where we are
unbinding without the device having been physically removed and want to
put the device in a suitable state. Failing with -ENODEV (as it
currently does) seems to be the right thing to do.

I wonder whether removing some of these error messages might be an
option? It appears that some of them are present in other drivers, but
I don't know whether such messages get displayed when that hardware is
unplugged too or whether I'm missing something that protects against
that.

> > 
> >  
> > > Also as reported earlier, (only) on first plug the more worrying
> > > but 
> > > possibly unrelated crash still happens:
> > > ------------[ cut here ]------------
> > > DMA-API: xhci-hcd xhci-hcd.1.auto: cacheline tracking EEXIST, 
> > > overlapping mappings aren't supported
> > > WARNING: CPU: 0 PID: 23 at kernel/dma/debug.c:570
> > > add_dma_entry+0x1d9/0x270
> > > Modules linked in: rfcomm iptable_nat bnep usb_f_uac2 u_audio 
> > > snd_sof_nocodec usb_f_mass_storage usb_f_eem u_ether
> > > spi_pxa2xx_platform 
> > > dw_dmac usb_f_serial u_serial libcomposite intel_mrfld_pwrbtn 
> > > snd_sof_pci_intel_tng pwm_lpss_pci intel_mrfld_adc pwm_lpss
> > > snd_sof_pci 
> > > snd_sof_intel_ipc snd_sof_intel_atom dw_dmac_pci dw_dmac_core
> > > snd_sof
> > > snd_sof_xtensa_dsp snd_soc_acpi spi_pxa2xx_pci brcmfmac brcmutil 
> > > hci_uart leds_gpio btbcm ti_ads7950 industrialio_triggered_buffer
> > > kfifo_buf tun ledtrig_timer ledtrig_heartbeat mmc_block 
> > > extcon_intel_mrfld sdhci_pci cqhci sdhci led_class mmc_core 
> > > intel_soc_pmic_mrfld btrfs libcrc32c xor zstd_compress zlib_deflate
> > > raid6_pq
> > > CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.15.1-edison-acpi-
> > > standard #1
> > > Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 
> > > 2015.01.21:18.19.48
> > > Workqueue: usb_hub_wq hub_event
> > > RIP: 0010:add_dma_entry+0x1d9/0x270
> > > Code: ff 0f 84 97 00 00 00 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8
> > > 39
> > > ff 
> > > 52 00 48 89 c6 4c 89 e2 48 c7 c7 f0 ab e7 a7 e8 c7 5c b5 00 <0f> 0b
> > > 48 
> > > 85 ed 0f 85 a4 b3 b5 00 8b 05 46 38 9f 01 85 c0 0f 85 df
> > > RSP: 0000:ffffb047400cfac8 EFLAGS: 00010282
> > > RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffff9e25fe217478
> > > RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9e25fe217470
> > > RBP: ffff9e25c12ff780 R08: ffffffffa83359a8 R09: 0000000000009ffb
> > > R10: 00000000ffffe000 R11: 3fffffffffffffff R12: ffff9e25c8a24040
> > > R13: 0000000000000001 R14: 0000000000000206 R15: 00000000000f8be4
> > > FS:  0000000000000000(0000) GS:ffff9e25fe200000(0000)
> > > knlGS:0000000000000000
> > > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > CR2: 00007f62c6d586d8 CR3: 0000000002f3c000 CR4: 00000000001006f0
> > > Call Trace:
> > >   dma_map_page_attrs+0xfb/0x250
> > >   ? usb_hcd_link_urb_to_ep+0x14/0xa0
> > >   usb_hcd_map_urb_for_dma+0x3b1/0x4e0
> > >   usb_hcd_submit_urb+0x93/0xbb0
> > >   ? create_prof_cpu_mask+0x20/0x20
> > >   ? arch_stack_walk+0x73/0xf0
> > >   ? usb_hcd_link_urb_to_ep+0x14/0xa0
> > >   ? prepare_transfer+0xff/0x140
> > >   usb_start_wait_urb+0x60/0x160
> > >   usb_control_msg+0xda/0x140
> > >   hub_ext_port_status+0x82/0x100
> > >   hub_event+0x1b1/0x1830
> > >   ? hub_activate+0x58c/0x860
> > >   process_one_work+0x1d4/0x370
> > >   worker_thread+0x48/0x3d0
> > >   ? rescuer_thread+0x360/0x360
> > >   kthread+0x122/0x140
> > >   ? set_kthread_struct+0x40/0x40
> > >   ret_from_fork+0x22/0x30
> > > ---[ end trace da6ffcd9fad23a74 ]---
> > > DMA-API: Mapped at:
> > >   debug_dma_map_page+0x60/0xf0
> > >   dma_map_page_attrs+0xfb/0x250
> > >   usb_hcd_map_urb_for_dma+0x3b1/0x4e0
> > >   usb_hcd_submit_urb+0x93/0xbb0
> > >   usb_start_wait_urb+0x60/0x160
> > > usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
> > > usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, 
> > > bcdDevice= 2.00
> > > usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > > usb 1-1.1: Product: LAN9514
> > > usb 1-1.1: Manufacturer: SMSC
> > > usb 1-1.1: SerialNumber: 00951d0d
> > > 
> > > 
> > I'm not seeing that at all, but I've also been developing and testing
> > on an ARM based device that has the LAN9500A I'm using built into it.
> > 
> > I have also recently got a LAN9500A devkit which I've tried on my
> > Ryzen
> > laptop and that's not throwing that error either.
> > 
> > Martyn
> Yes I am using the LAN9514 Evaluation board (EVB9514). Plugging the
> board into my desktop with 5.15 Ubuntu PPA kernel I also don't see this
> crash.
> OTOH I'm building vanilla kernel so no idea why this happens. It might
> be that I have CONFIG_DMA_API_DEBUG and Ubuntu not.
>  

I suspect this is probably unrelated (directly) to the driver then.

Martyn

>