From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Date: Mon, 18 Sep 2017 17:33:06 +0200 [thread overview]
Message-ID: <94a13757-9415-e3b0-ae14-e4f06921c0e7@denx.de> (raw)
In-Reply-To: <b9bf5215-d8a8-3afb-078e-56b326a353f0@denx.de>
On 09/18/2017 05:26 PM, Stefan Roese wrote:
> On 18.09.2017 17:13, Marek Vasut wrote:
>> On 09/18/2017 03:40 PM, Bin Meng wrote:
>>>
>>> This adds the missing interrupt transfer support to xHCI driver, so
>>> that devices like USB keyboard that uses interrupt transfer when
>>> CONFIG_SYS_USB_EVENT_POLL is defined can work.
>>>
>>> This also adds full speed device support. Unlike low/high/super speed
>>> devices, full speed device may report its endpoint 0 max packet size
>>> as 8/16/32/64. xHCI driver guesses 64 for the first attempt to get the
>>> initial 8 bytes device descriptor, and later adjusts the context for
>>> endpoint 0.
>>>
>>> This series also made several updates to xHCI driver to conform with
>>> the spec.
>>>
>>> This series is available at u-boot-x86/xhci-working for testing.
>> Looks good to me. Stefan, can you please give A-B/R-B on the series ?
>> I'd like to pick it for 2017.09 :)
>
> That would be 2017.11, right?
Yes :)
> Sure, I'll review and test this series most likely tomorrow.
Thanks
> Thanks,
> Stefan
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2017-09-18 15:33 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-18 13:40 [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support Bin Meng
2017-09-18 13:40 ` [U-Boot] [PATCH 01/14] dm: usb: Fix broken usb_stop() Bin Meng
2017-09-22 4:56 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 02/14] dm: usb: Remove no longer needed blk_unbind_all() Bin Meng
2017-09-22 4:57 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 03/14] usb: xhci: Don't assume LS/FS devices are always behind a HS hub Bin Meng
2017-09-22 4:58 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 04/14] usb: Handle audio extension endpoint descriptor in usb_parse_config() Bin Meng
2017-09-22 4:59 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 05/14] usb: xhci: Add interrupt transfer support Bin Meng
2017-09-22 5:00 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 06/14] usb: Only get 64 bytes device descriptor for full speed devices Bin Meng
2017-09-22 5:01 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 07/14] usb: Read device descriptor after device is addressed for xHCI Bin Meng
2017-09-22 5:01 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 08/14] usb: xhci: Fix max packet size for full speed device endpoint 0 Bin Meng
2017-09-22 5:02 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 09/14] usb: hub: Clear port reset before usb_hub_port_connect_change() Bin Meng
2017-09-22 5:03 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 10/14] usb: hub: Clear BH reset status change for a 3.0 hub Bin Meng
2017-09-22 5:04 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 11/14] usb: xhci: Honor endpoint's interval Bin Meng
2017-09-22 5:06 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 12/14] usb: xhci: Program max burst size for endpoint Bin Meng
2017-09-22 5:11 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 13/14] usb: xhci: Set 'Error Count' to 0 for isoch endpoints Bin Meng
2017-09-22 5:12 ` Stefan Roese
2017-09-18 13:40 ` [U-Boot] [PATCH 14/14] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints Bin Meng
2017-09-22 5:13 ` Stefan Roese
2017-09-18 15:13 ` [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support Marek Vasut
2017-09-18 15:26 ` Stefan Roese
2017-09-18 15:33 ` Marek Vasut [this message]
2017-09-18 15:38 ` Stefan Roese
2017-09-19 1:38 ` Bin Meng
2017-09-19 4:54 ` Stefan Roese
2017-09-19 4:58 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94a13757-9415-e3b0-ae14-e4f06921c0e7@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.