* [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-10-18 16:29 ` Christian Hewitt
0 siblings, 0 replies; 12+ messages in thread
From: Christian Hewitt @ 2019-10-18 16:29 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
boards in the VIM3 family including VIM3L.
This change depends on [1] being merged/applied first.
[1] https://patchwork.kernel.org/patch/11198535/
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
.../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 ----------------------
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++
2 files changed, 88 insertions(+), 89 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 69019d0..190e934 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -5,8 +5,6 @@
* Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
*/
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
/ {
vddcpu_a: regulator-vddcpu-a {
/*
@@ -45,69 +43,6 @@
regulator-boot-on;
regulator-always-on;
};
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "G12A-KHADAS-VIM3";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
};
&cpu0 {
@@ -152,18 +87,6 @@
clock-latency = <50000>;
};
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>;
pinctrl-names = "default";
@@ -179,15 +102,3 @@
clock-names = "clkin1";
status = "okay";
};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 90815fa..3f5c373 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
model = "Khadas VIM3";
@@ -76,6 +77,61 @@
clock-names = "ext_clock";
};
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12A-KHADAS-VIM3";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+
dc_in: regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
@@ -171,6 +227,14 @@
};
};
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
@@ -206,6 +270,18 @@
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -328,6 +404,18 @@
vqmmc-supply = <&emmc_1v8>;
};
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
--
2.7.4
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-10-18 16:29 ` Christian Hewitt
0 siblings, 0 replies; 12+ messages in thread
From: Christian Hewitt @ 2019-10-18 16:29 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
boards in the VIM3 family including VIM3L.
This change depends on [1] being merged/applied first.
[1] https://patchwork.kernel.org/patch/11198535/
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
.../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 ----------------------
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++
2 files changed, 88 insertions(+), 89 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 69019d0..190e934 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -5,8 +5,6 @@
* Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
*/
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
-
/ {
vddcpu_a: regulator-vddcpu-a {
/*
@@ -45,69 +43,6 @@
regulator-boot-on;
regulator-always-on;
};
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "G12A-KHADAS-VIM3";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
-
- assigned-clocks = <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- /* 8ch hdmi interface */
- dai-link-3 {
- sound-dai = <&tdmif_b>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-0 = <1 1>;
- dai-tdm-slot-tx-mask-1 = <1 1>;
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-tx-mask-3 = <1 1>;
- mclk-fs = <256>;
-
- codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
- };
- };
-
- /* hdmi glue */
- dai-link-4 {
- sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
- codec {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&arb {
- status = "okay";
-};
-
-&clkc_audio {
- status = "okay";
};
&cpu0 {
@@ -152,18 +87,6 @@
clock-latency = <50000>;
};
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>;
pinctrl-names = "default";
@@ -179,15 +102,3 @@
clock-names = "clkin1";
status = "okay";
};
-
-&tdmif_b {
- status = "okay";
-};
-
-&tdmout_b {
- status = "okay";
-};
-
-&tohdmitx {
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 90815fa..3f5c373 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
model = "Khadas VIM3";
@@ -76,6 +77,61 @@
clock-names = "ext_clock";
};
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12A-KHADAS-VIM3";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+
dc_in: regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
@@ -171,6 +227,14 @@
};
};
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
@@ -206,6 +270,18 @@
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -328,6 +404,18 @@
vqmmc-supply = <&emmc_1v8>;
};
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
2019-10-18 16:29 ` Christian Hewitt
(?)
@ 2019-10-21 8:29 ` Neil Armstrong
-1 siblings, 0 replies; 12+ messages in thread
From: Neil Armstrong @ 2019-10-21 8:29 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 18/10/2019 18:29, Christian Hewitt wrote:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 ----------------------
> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++
> 2 files changed, 88 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> index 69019d0..190e934 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> @@ -5,8 +5,6 @@
> * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
> */
>
> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> -
> / {
> vddcpu_a: regulator-vddcpu-a {
> /*
> @@ -45,69 +43,6 @@
> regulator-boot-on;
> regulator-always-on;
> };
> -
> - sound {
> - compatible = "amlogic,axg-sound-card";
> - model = "G12A-KHADAS-VIM3";
> - audio-aux-devs = <&tdmout_b>;
> - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> - "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> - "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> - "TDM_B Playback", "TDMOUT_B OUT";
> -
> - assigned-clocks = <&clkc CLKID_MPLL2>,
> - <&clkc CLKID_MPLL0>,
> - <&clkc CLKID_MPLL1>;
> - assigned-clock-parents = <0>, <0>, <0>;
> - assigned-clock-rates = <294912000>,
> - <270950400>,
> - <393216000>;
> - status = "okay";
> -
> - dai-link-0 {
> - sound-dai = <&frddr_a>;
> - };
> -
> - dai-link-1 {
> - sound-dai = <&frddr_b>;
> - };
> -
> - dai-link-2 {
> - sound-dai = <&frddr_c>;
> - };
> -
> - /* 8ch hdmi interface */
> - dai-link-3 {
> - sound-dai = <&tdmif_b>;
> - dai-format = "i2s";
> - dai-tdm-slot-tx-mask-0 = <1 1>;
> - dai-tdm-slot-tx-mask-1 = <1 1>;
> - dai-tdm-slot-tx-mask-2 = <1 1>;
> - dai-tdm-slot-tx-mask-3 = <1 1>;
> - mclk-fs = <256>;
> -
> - codec {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> - };
> - };
> -
> - /* hdmi glue */
> - dai-link-4 {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> -
> - codec {
> - sound-dai = <&hdmi_tx>;
> - };
> - };
> - };
> -};
> -
> -&arb {
> - status = "okay";
> -};
> -
> -&clkc_audio {
> - status = "okay";
> };
>
> &cpu0 {
> @@ -152,18 +87,6 @@
> clock-latency = <50000>;
> };
>
> -&frddr_a {
> - status = "okay";
> -};
> -
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
> &pwm_ab {
> pinctrl-0 = <&pwm_a_e_pins>;
> pinctrl-names = "default";
> @@ -179,15 +102,3 @@
> clock-names = "clkin1";
> status = "okay";
> };
> -
> -&tdmif_b {
> - status = "okay";
> -};
> -
> -&tdmout_b {
> - status = "okay";
> -};
> -
> -&tohdmitx {
> - status = "okay";
> -};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index 90815fa..3f5c373 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -7,6 +7,7 @@
>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>
> / {
> model = "Khadas VIM3";
> @@ -76,6 +77,61 @@
> clock-names = "ext_clock";
> };
>
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "G12A-KHADAS-VIM3";
> + audio-aux-devs = <&tdmout_b>;
> + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT";
> +
> + assigned-clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + assigned-clock-parents = <0>, <0>, <0>;
> + assigned-clock-rates = <294912000>,
> + <270950400>,
> + <393216000>;
> + status = "okay";
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + /* 8ch hdmi interface */
> + dai-link-3 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* hdmi glue */
> + dai-link-4 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> + codec {
> + sound-dai = <&hdmi_tx>;
> + };
> + };
> + };
> +
> dc_in: regulator-dc_in {
> compatible = "regulator-fixed";
> regulator-name = "DC_IN";
> @@ -171,6 +227,14 @@
> };
> };
>
> +&arb {
> + status = "okay";
> +};
> +
> +&clkc_audio {
> + status = "okay";
> +};
> +
> &cec_AO {
> pinctrl-0 = <&cec_ao_a_h_pins>;
> pinctrl-names = "default";
> @@ -206,6 +270,18 @@
> amlogic,tx-delay-ns = <2>;
> };
>
> +&frddr_a {
> + status = "okay";
> +};
> +
> +&frddr_b {
> + status = "okay";
> +};
> +
> +&frddr_c {
> + status = "okay";
> +};
> +
> &hdmi_tx {
> status = "okay";
> pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> @@ -328,6 +404,18 @@
> vqmmc-supply = <&emmc_1v8>;
> };
>
> +&tdmif_b {
> + status = "okay";
> +};
> +
> +&tdmout_b {
> + status = "okay";
> +};
> +
> +&tohdmitx {
> + status = "okay";
> +};
> +
> &uart_A {
> status = "okay";
> pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-10-21 8:29 ` Neil Armstrong
0 siblings, 0 replies; 12+ messages in thread
From: Neil Armstrong @ 2019-10-21 8:29 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 18/10/2019 18:29, Christian Hewitt wrote:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 ----------------------
> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++
> 2 files changed, 88 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> index 69019d0..190e934 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> @@ -5,8 +5,6 @@
> * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
> */
>
> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> -
> / {
> vddcpu_a: regulator-vddcpu-a {
> /*
> @@ -45,69 +43,6 @@
> regulator-boot-on;
> regulator-always-on;
> };
> -
> - sound {
> - compatible = "amlogic,axg-sound-card";
> - model = "G12A-KHADAS-VIM3";
> - audio-aux-devs = <&tdmout_b>;
> - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> - "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> - "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> - "TDM_B Playback", "TDMOUT_B OUT";
> -
> - assigned-clocks = <&clkc CLKID_MPLL2>,
> - <&clkc CLKID_MPLL0>,
> - <&clkc CLKID_MPLL1>;
> - assigned-clock-parents = <0>, <0>, <0>;
> - assigned-clock-rates = <294912000>,
> - <270950400>,
> - <393216000>;
> - status = "okay";
> -
> - dai-link-0 {
> - sound-dai = <&frddr_a>;
> - };
> -
> - dai-link-1 {
> - sound-dai = <&frddr_b>;
> - };
> -
> - dai-link-2 {
> - sound-dai = <&frddr_c>;
> - };
> -
> - /* 8ch hdmi interface */
> - dai-link-3 {
> - sound-dai = <&tdmif_b>;
> - dai-format = "i2s";
> - dai-tdm-slot-tx-mask-0 = <1 1>;
> - dai-tdm-slot-tx-mask-1 = <1 1>;
> - dai-tdm-slot-tx-mask-2 = <1 1>;
> - dai-tdm-slot-tx-mask-3 = <1 1>;
> - mclk-fs = <256>;
> -
> - codec {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> - };
> - };
> -
> - /* hdmi glue */
> - dai-link-4 {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> -
> - codec {
> - sound-dai = <&hdmi_tx>;
> - };
> - };
> - };
> -};
> -
> -&arb {
> - status = "okay";
> -};
> -
> -&clkc_audio {
> - status = "okay";
> };
>
> &cpu0 {
> @@ -152,18 +87,6 @@
> clock-latency = <50000>;
> };
>
> -&frddr_a {
> - status = "okay";
> -};
> -
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
> &pwm_ab {
> pinctrl-0 = <&pwm_a_e_pins>;
> pinctrl-names = "default";
> @@ -179,15 +102,3 @@
> clock-names = "clkin1";
> status = "okay";
> };
> -
> -&tdmif_b {
> - status = "okay";
> -};
> -
> -&tdmout_b {
> - status = "okay";
> -};
> -
> -&tohdmitx {
> - status = "okay";
> -};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index 90815fa..3f5c373 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -7,6 +7,7 @@
>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>
> / {
> model = "Khadas VIM3";
> @@ -76,6 +77,61 @@
> clock-names = "ext_clock";
> };
>
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "G12A-KHADAS-VIM3";
> + audio-aux-devs = <&tdmout_b>;
> + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT";
> +
> + assigned-clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + assigned-clock-parents = <0>, <0>, <0>;
> + assigned-clock-rates = <294912000>,
> + <270950400>,
> + <393216000>;
> + status = "okay";
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + /* 8ch hdmi interface */
> + dai-link-3 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* hdmi glue */
> + dai-link-4 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> + codec {
> + sound-dai = <&hdmi_tx>;
> + };
> + };
> + };
> +
> dc_in: regulator-dc_in {
> compatible = "regulator-fixed";
> regulator-name = "DC_IN";
> @@ -171,6 +227,14 @@
> };
> };
>
> +&arb {
> + status = "okay";
> +};
> +
> +&clkc_audio {
> + status = "okay";
> +};
> +
> &cec_AO {
> pinctrl-0 = <&cec_ao_a_h_pins>;
> pinctrl-names = "default";
> @@ -206,6 +270,18 @@
> amlogic,tx-delay-ns = <2>;
> };
>
> +&frddr_a {
> + status = "okay";
> +};
> +
> +&frddr_b {
> + status = "okay";
> +};
> +
> +&frddr_c {
> + status = "okay";
> +};
> +
> &hdmi_tx {
> status = "okay";
> pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> @@ -328,6 +404,18 @@
> vqmmc-supply = <&emmc_1v8>;
> };
>
> +&tdmif_b {
> + status = "okay";
> +};
> +
> +&tdmout_b {
> + status = "okay";
> +};
> +
> +&tohdmitx {
> + status = "okay";
> +};
> +
> &uart_A {
> status = "okay";
> pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-10-21 8:29 ` Neil Armstrong
0 siblings, 0 replies; 12+ messages in thread
From: Neil Armstrong @ 2019-10-21 8:29 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On 18/10/2019 18:29, Christian Hewitt wrote:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 ----------------------
> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++
> 2 files changed, 88 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> index 69019d0..190e934 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> @@ -5,8 +5,6 @@
> * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
> */
>
> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> -
> / {
> vddcpu_a: regulator-vddcpu-a {
> /*
> @@ -45,69 +43,6 @@
> regulator-boot-on;
> regulator-always-on;
> };
> -
> - sound {
> - compatible = "amlogic,axg-sound-card";
> - model = "G12A-KHADAS-VIM3";
> - audio-aux-devs = <&tdmout_b>;
> - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> - "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> - "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> - "TDM_B Playback", "TDMOUT_B OUT";
> -
> - assigned-clocks = <&clkc CLKID_MPLL2>,
> - <&clkc CLKID_MPLL0>,
> - <&clkc CLKID_MPLL1>;
> - assigned-clock-parents = <0>, <0>, <0>;
> - assigned-clock-rates = <294912000>,
> - <270950400>,
> - <393216000>;
> - status = "okay";
> -
> - dai-link-0 {
> - sound-dai = <&frddr_a>;
> - };
> -
> - dai-link-1 {
> - sound-dai = <&frddr_b>;
> - };
> -
> - dai-link-2 {
> - sound-dai = <&frddr_c>;
> - };
> -
> - /* 8ch hdmi interface */
> - dai-link-3 {
> - sound-dai = <&tdmif_b>;
> - dai-format = "i2s";
> - dai-tdm-slot-tx-mask-0 = <1 1>;
> - dai-tdm-slot-tx-mask-1 = <1 1>;
> - dai-tdm-slot-tx-mask-2 = <1 1>;
> - dai-tdm-slot-tx-mask-3 = <1 1>;
> - mclk-fs = <256>;
> -
> - codec {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> - };
> - };
> -
> - /* hdmi glue */
> - dai-link-4 {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> -
> - codec {
> - sound-dai = <&hdmi_tx>;
> - };
> - };
> - };
> -};
> -
> -&arb {
> - status = "okay";
> -};
> -
> -&clkc_audio {
> - status = "okay";
> };
>
> &cpu0 {
> @@ -152,18 +87,6 @@
> clock-latency = <50000>;
> };
>
> -&frddr_a {
> - status = "okay";
> -};
> -
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
> &pwm_ab {
> pinctrl-0 = <&pwm_a_e_pins>;
> pinctrl-names = "default";
> @@ -179,15 +102,3 @@
> clock-names = "clkin1";
> status = "okay";
> };
> -
> -&tdmif_b {
> - status = "okay";
> -};
> -
> -&tdmout_b {
> - status = "okay";
> -};
> -
> -&tohdmitx {
> - status = "okay";
> -};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index 90815fa..3f5c373 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -7,6 +7,7 @@
>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>
> / {
> model = "Khadas VIM3";
> @@ -76,6 +77,61 @@
> clock-names = "ext_clock";
> };
>
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "G12A-KHADAS-VIM3";
> + audio-aux-devs = <&tdmout_b>;
> + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT";
> +
> + assigned-clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + assigned-clock-parents = <0>, <0>, <0>;
> + assigned-clock-rates = <294912000>,
> + <270950400>,
> + <393216000>;
> + status = "okay";
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + /* 8ch hdmi interface */
> + dai-link-3 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* hdmi glue */
> + dai-link-4 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> + codec {
> + sound-dai = <&hdmi_tx>;
> + };
> + };
> + };
> +
> dc_in: regulator-dc_in {
> compatible = "regulator-fixed";
> regulator-name = "DC_IN";
> @@ -171,6 +227,14 @@
> };
> };
>
> +&arb {
> + status = "okay";
> +};
> +
> +&clkc_audio {
> + status = "okay";
> +};
> +
> &cec_AO {
> pinctrl-0 = <&cec_ao_a_h_pins>;
> pinctrl-names = "default";
> @@ -206,6 +270,18 @@
> amlogic,tx-delay-ns = <2>;
> };
>
> +&frddr_a {
> + status = "okay";
> +};
> +
> +&frddr_b {
> + status = "okay";
> +};
> +
> +&frddr_c {
> + status = "okay";
> +};
> +
> &hdmi_tx {
> status = "okay";
> pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> @@ -328,6 +404,18 @@
> vqmmc-supply = <&emmc_1v8>;
> };
>
> +&tdmif_b {
> + status = "okay";
> +};
> +
> +&tdmout_b {
> + status = "okay";
> +};
> +
> +&tohdmitx {
> + status = "okay";
> +};
> +
> &uart_A {
> status = "okay";
> pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
2019-10-18 16:29 ` Christian Hewitt
(?)
@ 2019-11-06 19:09 ` Kevin Hilman
-1 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2019-11-06 19:09 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Christian Hewitt <christianshewitt@gmail.com> writes:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Queued for v5.5, but...
> -&frddr_a {
> - status = "okay";
> -};
This node doesn't exist upstream...
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
... and these two were present so were removed after manual fix of the
conflict.
Kevin
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-11-06 19:09 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2019-11-06 19:09 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Christian Hewitt <christianshewitt@gmail.com> writes:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Queued for v5.5, but...
> -&frddr_a {
> - status = "okay";
> -};
This node doesn't exist upstream...
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
... and these two were present so were removed after manual fix of the
conflict.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-11-06 19:09 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2019-11-06 19:09 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Christian Hewitt <christianshewitt@gmail.com> writes:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Queued for v5.5, but...
> -&frddr_a {
> - status = "okay";
> -};
This node doesn't exist upstream...
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
... and these two were present so were removed after manual fix of the
conflict.
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
2019-11-06 19:09 ` Kevin Hilman
(?)
@ 2019-11-06 19:35 ` Kevin Hilman
-1 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2019-11-06 19:35 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Kevin Hilman <khilman@baylibre.com> writes:
> Christian Hewitt <christianshewitt@gmail.com> writes:
>
>> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
>> boards in the VIM3 family including VIM3L.
>>
>> This change depends on [1] being merged/applied first.
>>
>> [1] https://patchwork.kernel.org/patch/11198535/
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>
> Queued for v5.5, but...
>
>> -&frddr_a {
>> - status = "okay";
>> -};
>
> This node doesn't exist upstream...
oops, nevermind. I see it's not upstream because it's still in my fixes
branch.
Kevin
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-11-06 19:35 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2019-11-06 19:35 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Kevin Hilman <khilman@baylibre.com> writes:
> Christian Hewitt <christianshewitt@gmail.com> writes:
>
>> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
>> boards in the VIM3 family including VIM3L.
>>
>> This change depends on [1] being merged/applied first.
>>
>> [1] https://patchwork.kernel.org/patch/11198535/
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>
> Queued for v5.5, but...
>
>> -&frddr_a {
>> - status = "okay";
>> -};
>
> This node doesn't exist upstream...
oops, nevermind. I see it's not upstream because it's still in my fixes
branch.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
@ 2019-11-06 19:35 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2019-11-06 19:35 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Kevin Hilman <khilman@baylibre.com> writes:
> Christian Hewitt <christianshewitt@gmail.com> writes:
>
>> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
>> boards in the VIM3 family including VIM3L.
>>
>> This change depends on [1] being merged/applied first.
>>
>> [1] https://patchwork.kernel.org/patch/11198535/
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>
> Queued for v5.5, but...
>
>> -&frddr_a {
>> - status = "okay";
>> -};
>
> This node doesn't exist upstream...
oops, nevermind. I see it's not upstream because it's still in my fixes
branch.
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread