Hi,

On 6/7/21 10:29 AM, Igor Matheus Andrade Torrente wrote:
> Modify some parts of the text and add the necessary formatting to leverage
> the rst features. Including links, code-blocks, bullet lists, etc.
> 
> Also, add a table of contents at the beginning and adds a new license.
> 
> This change helps integrate this documentation to the rest of the rst
> documentation.
> 
> Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
> ---
> 
> v2: Rebase the patch to cover the commit cae2181b498fe
> 
> v3: Adds some Jani and Samuel's suggestion, and changes the licensing.
> 
> v4: Reverts the licensing change to a dual-licensing
>      'GPL-2.0 OR GFDL-1.2-no-invariants-or-later'.
> 
>      And, therefore, this patch should only be accepted when we have
>      all acks from the copyright owners.
> 
>      Current status:
> 
>      Gene Collins <gene@collinsnet.net> - Pending
>      Samuel Thibault <samuel.thibault@ens-lyon.org> - ACK[1]
>      Christopher Brannon <chris@the-brannons.com> - ACK[2]
>      William Hubbs <w.d.hubbs@gmail.com> - Pending
>      Steve Holmes <steve.holmes88@gmail.com> - Pending
> 
>      I will send a reply to this patch with all the files, so the Speakup
>      community can evaluate the changes and compare them against the original
>      and V2.
> 

The files as attachment.

> [1] https://marc.info/?l=linux-kernel&m=162275583531274&w=2
> [2] https://www.spinics.net/lists/linux-doc/msg97655.html
> ---
>   Documentation/admin-guide/index.rst    |    1 +
>   Documentation/admin-guide/spkguide.rst | 1421 +++++++++++++++++++++
>   Documentation/admin-guide/spkguide.txt | 1620 ------------------------
>   3 files changed, 1422 insertions(+), 1620 deletions(-)
>   create mode 100644 Documentation/admin-guide/spkguide.rst
>   delete mode 100644 Documentation/admin-guide/spkguide.txt
> 
> diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
> index 423116c4e787..c45121777ecf 100644
> --- a/Documentation/admin-guide/index.rst
> +++ b/Documentation/admin-guide/index.rst
> @@ -112,6 +112,7 @@ configure specific aspects of kernel behavior to your liking.
>      ras
>      rtc
>      serial-console
> +   spkguide
>      svga
>      syscall-user-dispatch
>      sysrq
> diff --git a/Documentation/admin-guide/spkguide.rst b/Documentation/admin-guide/spkguide.rst
> new file mode 100644
> index 000000000000..2bf42e5f12b7
> --- /dev/null
> +++ b/Documentation/admin-guide/spkguide.rst
> @@ -0,0 +1,1421 @@
> +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.2-no-invariants-or-later
> +
> +========================
> +The Speakup User's Guide
> +========================
> +
> +| For Speakup 3.1.2 and Later
> +| By Gene Collins
> +| Updated by others
> +| Last modified on Mon Jun 3 17:08:21 2021
> +| Document version 1.3
> +
> +
> +.. contents:: :local:
> +
> +
> +Copyright
> +=========
> +
> +:Authors:
> + Copyright (c) 2005  Gene Collins
> +
> + Copyright (c) 2008  Samuel Thibault
> +
> + Copyright (c) 2009, 2010  the Speakup Team
> +
> +
> +Preface
> +=======
> +
> +The purpose of this document is to familiarize users with the user
> +interface to Speakup, a Linux Screen Reader.  If you need instructions
> +for installing or obtaining Speakup, visit the web site at
> +http://linux-speakup.org/.  Speakup is a set of patches to the standard
> +Linux kernel source tree.  It can be built as a series of modules, or as
> +a part of a monolithic kernel.  These details are beyond the scope of
> +this manual, but the user may need to be aware of the module
> +capabilities, depending on how your system administrator has installed
> +Speakup.  If Speakup is built as a part of a monolithic kernel, and the
> +user is using a hardware synthesizer, then Speakup will be able to
> +provide speech access from the time the kernel is loaded, until the time
> +the system is shutdown.  This means that if you have obtained Linux
> +installation media for a distribution which includes Speakup as a part
> +of its kernel, you will be able, as a blind person, to install Linux
> +with speech access unaided by a sighted person.  Again, these details
> +are beyond the scope of this manual, but the user should be aware of
> +them.  See the web site mentioned above for further details.
> +
> +
> +1.  Starting Speakup
> +====================
> +
> +If your system administrator has installed Speakup to work with your
> +specific synthesizer by default, then all you need to do to use Speakup
> +is to boot your system, and Speakup should come up talking.  This
> +assumes of course  that your synthesizer is a supported hardware
> +synthesizer, and that it is either installed in or connected to your
> +system, and is if necessary powered on.
> +
> +It is possible, however, that Speakup may have been compiled into the
> +kernel with no default synthesizer.  It is even possible that your
> +kernel has been compiled with support for some of the supported
> +synthesizers and not others.  If you find that this is the case, and
> +your synthesizer is supported but not available, complain to the person
> +who compiled and installed your kernel.  Or better yet, go to the web
> +site, and learn how to patch Speakup into your own kernel source, and
> +build and install your own kernel.
> +
> +If your kernel has been compiled with Speakup, and has no default
> +synthesizer set, or you would like to use a different synthesizer than
> +the default one, then you may issue the following command at the boot
> +prompt of your boot loader.::
> +
> +  linux speakup.synth=ltlk
> +
> +This command would tell Speakup to look for and use a LiteTalk or
> +DoubleTalk LT at boot up.  You may replace the ltlk synthesizer keyword
> +with the keyword for whatever synthesizer you wish to use.  The
> +``speakup.synth`` parameter will accept the following keywords, provided
> +that support for the related synthesizers has been built into the
> +kernel.
> +
> +  acntsa -- Accent SA
> +
> +  acntpc -- Accent PC
> +
> +  apollo -- Apollo
> +
> +  audptr -- Audapter
> +
> +  bns -- Braille 'n Speak
> +
> +  dectlk -- DecTalk Express (old and new, db9 serial only)
> +
> +  decext -- DecTalk (old) External
> +
> +  dtlk -- DoubleTalk PC
> +
> +  keypc -- Keynote Gold PC
> +
> +  ltlk -- DoubleTalk LT, LiteTalk, or external Tripletalk (db9 serial only)
> +
> +  spkout -- Speak Out
> +
> +  txprt -- Transport
> +
> +  dummy -- Plain text terminal
> +
> +.. note::
> +   Speakup also does **NOT** support the internal Tripletalk!
> +
> +Speakup does support two other synthesizers, but because they work in
> +conjunction with other software, they must be loaded as modules after
> +their related software is loaded, and so are not available at boot up.
> +These are as follows:
> +
> +  decpc -- DecTalk PC (not available at boot up)
> +
> +  soft -- One of several software synthesizers (not available at boot up)
> +
> +See the sections on loading modules and software synthesizers later in
> +this manual for further details.  It should be noted here that the
> +speakup.synth boot parameter will have no effect if Speakup has been
> +compiled as modules.  In order for Speakup modules to be loaded during
> +the boot process, such action must be configured by your system
> +administrator.  This will mean that you will hear some, but not all,  of
> +the bootup messages.
> +
> +
> +2.  Basic operation
> +===================
> +
> +Once you have booted the system, and if necessary, have supplied the
> +proper bootup parameter for your synthesizer, Speakup will begin
> +talking as soon as the kernel is loaded.  In fact, it will talk a lot!
> +It will speak all the boot up messages that the kernel prints on the
> +screen during the boot process.  This is because Speakup is not a
> +separate screen reader, but is actually built into the operating
> +system.  Since almost all console applications must print text on the
> +screen using the kernel, and must get their keyboard input through the
> +kernel, they are automatically handled properly by Speakup.  There are a
> +few exceptions, but we'll come to those later.
> +
> +.. note::
> +
> +  In this guide I will refer to the numeric keypad as the keypad.
> +  This is done because the speakupmap.map file referred to later in this
> +  manual uses the term keypad instead of numeric keypad.  Also I'm lazy
> +  and would rather only type one word.  So keypad it is.  Got it?  Good.
> +
> +Most of the Speakup review keys are located on the keypad at the far
> +right of the keyboard.  The numlock key should be off, in order for these
> +to work.  If you toggle the numlock on, the keypad will produce numbers,
> +which is exactly what you want for spreadsheets and such.  For the
> +purposes of this guide, you should have the numlock turned off, which is
> +its default state at bootup.
> +
> +You probably won't want to listen to all the bootup messages every time
> +you start your system, though it's a good idea to listen to them at
> +least once, just so you'll know what kind of information is available to
> +you during the boot process.  You can always review these messages after
> +bootup with the command::
> +
> +  dmesg | more
> +
> +In order to speed the boot process, and to silence the speaking of the
> +bootup messages, just press the keypad enter key.  This key is located
> +in the bottom right corner of the keypad.  Speakup will shut up and stay
> +that way, until you press another key.
> +
> +You can check to see if the boot process has completed by pressing the 8
> +key on the keypad, which reads the current line.  This also has the
> +effect of starting Speakup talking again, so you can press keypad enter
> +to silence it again if the boot process has not completed.
> +
> +When the boot process is complete, you will arrive at a "login" prompt.
> +At this point, you'll need to type in your user id and password, as
> +provided by your system administrator.  You will hear Speakup speak the
> +letters of your user id as you type it, but not the password.  This is
> +because the password is not displayed on the screen for security
> +reasons.  This has nothing to do with Speakup, it's a Linux security
> +feature.
> +
> +Once you've logged in, you can run any Linux command or program which is
> +allowed by your user id.  Normal users will not be able to run programs
> +which require root privileges.
> +
> +When you are running a program or command, Speakup will automatically
> +speak new text as it arrives on the screen.  You can at any time silence
> +the speech with keypad enter, or use any of the Speakup review keys.
> +
> +Here are some basic Speakup review keys, and a short description of what
> +they do.
> +
> +  keypad 1 -- read previous character
> +
> +  keypad 2 -- read current character (pressing keypad 2 twice rapidly will speak
> +  the current character phonetically)
> +
> +  keypad 3 -- read next character
> +
> +  keypad 4 -- read previous word
> +
> +  keypad 5 -- read current word (press twice rapidly to spell the current word)
> +
> +  keypad 6 -- read next word
> +
> +  keypad 7 -- read previous line
> +
> +  keypad 8 -- read current line (press twice rapidly to hear how much the
> +  text on the current line is indented)
> +
> +  keypad 9 -- read next line
> +
> +  keypad period -- speak current cursor position and announce current
> +  virtual console
> +
> +It's also worth noting that the insert key on the keypad is mapped
> +as the speakup key.  Instead of pressing and releasing this key, as you
> +do under DOS or Windows, you hold it like a shift key, and press other
> +keys in combination with it.  For example, repeatedly holding keypad
> +insert, from now on called speakup, and keypad enter will toggle the
> +speaking of new text on the screen on and off.  This is not the same as
> +just pressing keypad enter by itself, which just silences the speech
> +until you hit another key.  When you hit speakup plus keypad enter,
> +Speakup will say, "You turned me off.", or "Hey, that's better."  When
> +Speakup is turned off, no new text on the screen will be spoken.  You
> +can still use the reading controls to review the screen however.
> +
> +
> +3.  Using the Speakup Help System
> +=================================
> +
> +In order to enter the Speakup help system, press and hold the speakup
> +key (remember that this is the keypad insert key), and press the `f1` key.
> +You will hear the message:
> +
> +"Press space to leave help, cursor up or down to scroll, or a letter to
> +go to commands in list."
> +
> +When you press the `spacebar` to leave the help system, you will hear:
> +
> +"Leaving help."
> +
> +While you are in the Speakup help system, you can scroll up or down
> +through the list of available commands using the cursor keys.  The list
> +of commands is arranged in alphabetical order.  If you wish to jump to
> +commands in a specific part of the alphabet, you may press the letter of
> +the alphabet you wish to jump to.
> +
> +You can also just explore by typing keyboard keys.  Pressing keys will
> +cause Speakup to speak the command associated with that key.  For
> +example, if you press the keypad 8 key, you will hear:
> +
> +"Keypad 8 is line, say current."
> +
> +You'll notice that some commands do not have keys assigned to them.
> +This is because they are very infrequently used commands, and are also
> +accessible through the sys system.  We'll discuss the sys system later
> +in this manual.
> +
> +You'll also notice that some commands have two keys assigned to them.
> +This is because Speakup has a built in set of alternative key bindings
> +for laptop users.  The alternate speakup key is the `caps lock` key.  You
> +can press and hold the `caps lock` key, while pressing an alternate
> +speakup command key to activate the command.  On most laptops, the
> +numeric keypad is defined as the keys in the `j k l` area of the keyboard.
> +
> +There is usually a function key which turns this keypad function on and
> +off, and some other key which controls the numlock state.  Toggling the
> +keypad functionality on and off can become a royal pain.  So, Speakup
> +gives you a simple way to get at an alternative set of key mappings for
> +your laptop.  These are also available by default on desktop systems,
> +because Speakup does not know whether it is running on a desktop or
> +laptop.  So you may choose which set of Speakup keys to use.  Some
> +system administrators may have chosen to compile Speakup for a desktop
> +system without this set of alternate key bindings, but these details are
> +beyond the scope of this manual.  To use the `caps lock` for its normal
> +purpose, hold the shift key while toggling the `caps lock` on and off.
> +
> +.. note::
> +
> +  Holding the `caps lock` key and pressing the `z` key will toggle the
> +  alternate `j k l` keypad on and off.
> +
> +
> +4.  Keys and Their Assigned Commands
> +====================================
> +
> +In this section, we'll go through a list of all the speakup keys and
> +commands.  You can also get a list of commands and assigned keys from
> +the help system.
> +
> +The following list was taken from the ``speakupmap.map`` file.  Key
> +assignments are on the left of the equal sign, and the associated
> +Speakup commands are on the right.  The designation "spk" means to press
> +and hold the speakup key, a.k.a. keypad insert, a.k.a. `caps lock`, while
> +pressing the other specified key.
> +
> +  spk key_f9 = punc_level_dec
> +
> +  spk key_f10 = punc_level_inc
> +
> +  spk key_f11 = reading_punc_dec
> +
> +  spk key_f12 = reading_punc_inc
> +
> +  spk key_1 = vol_dec
> +
> +  spk key_2 =  vol_inc
> +
> +  spk key_3 = pitch_dec
> +
> +  spk key_4 = pitch_inc
> +
> +  spk key_5 = rate_dec
> +
> +  spk key_6 = rate_inc
> +
> +  key_kpasterisk = toggle_cursoring
> +
> +  spk key_kpasterisk = speakup_goto
> +
> +  spk key_f1 = speakup_help
> +
> +  spk key_f2 = set_win
> +
> +  spk key_f3 = clear_win
> +
> +  spk key_f4 = enable_win
> +
> +  spk key_f5 = edit_some
> +
> +  spk key_f6 = edit_most
> +
> +  spk key_f7 = edit_delim
> +
> +  spk key_f8 = edit_repeat
> +
> +  shift spk key_f9 = edit_exnum
> +
> +  key_kp7 = say_prev_line
> +
> +  spk key_kp7 = left_edge
> +
> +  key_kp8 = say_line
> +
> +  double  key_kp8 = say_line_indent
> +
> +  spk key_kp8 = say_from_top
> +
> +  key_kp9 = say_next_line
> +
> +  spk  key_kp9 = top_edge
> +
> +  key_kpminus = speakup_parked
> +
> +  spk key_kpminus = say_char_num
> +
> +  key_kp4 = say_prev_word
> +
> +  spk key_kp4 = say_from_left
> +
> +  key_kp5 = say_word
> +
> +  double key_kp5 = spell_word
> +
> +  spk key_kp5 = spell_phonetic
> +
> +  key_kp6 = say_next_word
> +
> +  spk key_kp6 = say_to_right
> +
> +  key_kpplus = say_screen
> +
> +  spk key_kpplus = say_win
> +
> +  key_kp1 = say_prev_char
> +
> +  spk key_kp1 = right_edge
> +
> +  key_kp2 = say_char
> +
> +  spk key_kp2 = say_to_bottom
> +
> +  double key_kp2 = say_phonetic_char
> +
> +  key_kp3 = say_next_char
> +
> +  spk  key_kp3 = bottom_edge
> +
> +  key_kp0 = spk_key
> +
> +  key_kpdot = say_position
> +
> +  spk key_kpdot = say_attributes
> +
> +  key_kpenter = speakup_quiet
> +
> +  spk key_kpenter = speakup_off
> +
> +  key_sysrq = speech_kill
> +
> +  key_kpslash = speakup_cut
> +
> +  spk key_kpslash = speakup_paste
> +
> +  spk key_pageup = say_first_char
> +
> +  spk key_pagedown = say_last_char
> +
> +  key_capslock = spk_key
> +
> +  spk key_z = spk_lock
> +
> +  key_leftmeta = spk_key
> +
> +  ctrl spk key_0 = speakup_goto
> +
> +  spk key_u = say_prev_line
> +
> +  spk key_i = say_line
> +
> +  double spk key_i = say_line_indent
> +
> +  spk key_o = say_next_line
> +
> +  spk key_minus = speakup_parked
> +
> +  shift spk key_minus = say_char_num
> +
> +  spk key_j = say_prev_word
> +
> +  spk key_k = say_word
> +
> +  double spk key_k = spell_word
> +
> +  spk key_l = say_next_word
> +
> +  spk key_m = say_prev_char
> +
> +  spk key_comma = say_char
> +
> +  double spk key_comma = say_phonetic_char
> +
> +  spk key_dot = say_next_char
> +
> +  spk key_n = say_position
> +
> +  ctrl spk key_m = left_edge
> +
> +  ctrl spk key_y = top_edge
> +
> +  ctrl spk key_dot = right_edge
> +
> +  ctrl spk key_p = bottom_edge
> +
> +  spk key_apostrophe = say_screen
> +
> +  spk key_h = say_from_left
> +
> +  spk key_y = say_from_top
> +
> +  spk key_semicolon = say_to_right
> +
> +  spk key_p = say_to_bottom
> +
> +  spk key_slash = say_attributes
> +
> +  spk key_enter = speakup_quiet
> +
> +  ctrl  spk key_enter = speakup_off
> +
> +  spk key_9 = speakup_cut
> +
> +  spk key_8 = speakup_paste
> +
> +  shift spk key_m = say_first_char
> +
> +  ctrl spk key_semicolon = say_last_char
> +
> +  spk key_r = read_all_doc
> +
> +
> +5.  The Speakup Sys System
> +==========================
> +
> +The Speakup screen reader also creates a speakup subdirectory as a part
> +of the sys system.
> +
> +As a convenience, run as root::
> +
> +  ln -s /sys/accessibility/speakup /speakup
> +
> +to directly access speakup parameters from /speakup.
> +You can see these entries by typing the command::
> +
> +  ls -1 /speakup/*
> +
> +If you issue the above ls command, you will get back something like
> +this::
> +
> +  /speakup/attrib_bleep
> +  /speakup/bell_pos
> +  /speakup/bleep_time
> +  /speakup/bleeps
> +  /speakup/cursor_time
> +  /speakup/delimiters
> +  /speakup/ex_num
> +  /speakup/key_echo
> +  /speakup/keymap
> +  /speakup/no_interrupt
> +  /speakup/punc_all
> +  /speakup/punc_level
> +  /speakup/punc_most
> +  /speakup/punc_some
> +  /speakup/reading_punc
> +  /speakup/repeats
> +  /speakup/say_control
> +  /speakup/say_word_ctl
> +  /speakup/silent
> +  /speakup/spell_delay
> +  /speakup/synth
> +  /speakup/synth_direct
> +  /speakup/version
> +
> +  /speakup/i18n:
> +  announcements
> +  characters
> +  chartab
> +  colors
> +  ctl_keys
> +  formatted
> +  function_names
> +  key_names
> +  states
> +
> +  /speakup/soft:
> +  caps_start
> +  caps_stop
> +  delay_time
> +  direct
> +  freq
> +  full_time
> +  jiffy_delta
> +  pitch
> +  inflection
> +  punct
> +  rate
> +  tone
> +  trigger_time
> +  voice
> +  vol
> +
> +Notice the two subdirectories of ``/speakup``: ``/speakup/i18n`` and
> +``/speakup/soft``.
> +The `i18n` subdirectory is described in a later section.
> +The files under ``/speakup/soft`` represent settings that are specific to the
> +driver for the software synthesizer.  If you use the LiteTalk, your
> +synthesizer-specific settings would be found in ``/speakup/ltlk``.  In other words,
> +a subdirectory named ``/speakup/KWD`` is created to hold parameters specific
> +to the device whose keyword is KWD.
> +These parameters include volume, rate, pitch, and others.
> +
> +In addition to using the Speakup hot keys to change such things as
> +volume, pitch, and rate, you can also echo values to the appropriate
> +entry in the ``/speakup`` directory.  This is very useful, since it
> +lets you control Speakup parameters from within a script.  How you
> +would write such scripts is somewhat beyond the scope of this manual,
> +but I will include a couple of simple examples here to give you a
> +general idea of what such scripts can do.
> +
> +Suppose for example, that you wanted to control both the punctuation
> +level and the reading punctuation level at the same time.  For
> +simplicity, we'll call them punc0, punc1, punc2, and punc3.  The scripts
> +might look something like this:
> +
> +.. code-block:: shell
> +
> +  #!/bin/bash
> +  # punc0
> +  # set punc and reading punc levels to 0
> +  echo 0 >/speakup/punc_level
> +  echo 0 >/speakup/reading_punc
> +  echo Punctuation level set to 0.
> +
> +  #!/bin/bash
> +  # punc1
> +  # set punc and reading punc levels to 1
> +  echo 1 >/speakup/punc_level
> +  echo 1 >/speakup/reading_punc
> +  echo Punctuation level set to 1.
> +
> +  #!/bin/bash
> +  # punc2
> +  # set punc and reading punc levels to 2
> +  echo 2 >/speakup/punc_level
> +  echo 2 >/speakup/reading_punc
> +  echo Punctuation level set to 2.
> +
> +  #!/bin/bash
> +  # punc3
> +  # set punc and reading punc levels to 3
> +  echo 3 >/speakup/punc_level
> +  echo 3 >/speakup/reading_punc
> +  echo Punctuation level set to 3.
> +
> +If you were to store these four small scripts in a directory in your
> +path, perhaps ``/usr/local/bin``, and set the permissions to 755 with the
> +``chmod`` command, then you could change the default reading punc and
> +punctuation levels at the same time by issuing just one command.  For
> +example, if you were to execute the punc3 command at your shell prompt,
> +then the reading punc and punc level would both get set to 3.
> +
> +.. note::
> +
> +  The above scripts were written to work with bash, but
> +  regardless of which shell you use, you should be able to do something
> +  similar.
> +
> +The Speakup sys system also has another interesting use.  You can echo
> +Speakup parameters into the sys system in a script during system
> +startup, and speakup will return to your preferred parameters every time
> +the system is rebooted.
> +
> +Most of the Speakup sys parameters can be manipulated by a regular user
> +on the system.  However, there are a few parameters that are dangerous
> +enough that they should only be manipulated by the root user on your
> +system.  There are even some parameters that are read only, and cannot
> +be written to at all.  For example, the version entry in the Speakup
> +sys system is read only.  This is because there is no reason for a user
> +to tamper with the version number which is reported by Speakup.  Doing
> +an ``ls -l`` on ``/speakup/version`` will return this::
> +
> +  -r--r--r--    1 root     root            0 Mar 21 13:46 /speakup/version
> +
> +As you can see, the version entry in the Speakup sys system is read
> +only, is owned by root, and belongs to the root group.  Doing a cat of
> +``/speakup/version`` will display the Speakup version number, like
> +this::
> +
> +  cat /speakup/version
> +  Speakup v-2.00 CVS: Thu Oct 21 10:38:21 EDT 2004
> +  synth dtlk version 1.1
> +
> +The display shows the Speakup version number, along with the version
> +number of the driver for the current synthesizer.
> +
> +Looking at entries in the Speakup sys system can be useful in many
> +ways.  For example, you might wish to know what level your volume is set
> +at.  You could type::
> +
> +  cat /speakup/KWD/vol
> +  # Replace KWD with the keyword for your synthesizer, E.G., ltlk for LiteTalk.
> +  5
> +
> +The number five which comes back is the level at which the synthesizer
> +volume is set at.
> +
> +All the entries in the Speakup sys system are readable, some are
> +writable by root only, and some are writable by everyone.  Unless you
> +know what you are doing, you should probably leave the ones that are
> +writable by root only alone.  Most of the names are self explanatory.
> +Vol for controlling volume, pitch for pitch, inflection for pitch range, rate
> +for controlling speaking rate, etc.  If you find one you aren't sure about, you
> +can post a query on the Speakup list.
> +
> +
> +6.  Changing Synthesizers
> +=========================
> +
> +It is possible to change to a different synthesizer while speakup is
> +running.  In other words, it is not necessary to reboot the system
> +in order to use a different synthesizer.  You can simply echo the
> +synthesizer keyword to the ``/speakup/synth`` sys entry.
> +Depending on your situation, you may wish to echo none to the synth
> +sys entry, to disable speech while one synthesizer is disconnected and
> +a second one is connected in its place.  Then echo the keyword for the
> +new synthesizer into the synth sys entry in order to start speech
> +with the newly connected synthesizer.  See the list of synthesizer
> +keywords in section 1 to find the keyword which matches your synth.
> +
> +
> +7.  Loading modules
> +===================
> +
> +As mentioned earlier, Speakup can either be completely compiled into the
> +kernel, with the exception of the help module, or it can be compiled as
> +a series of modules.   When compiled as modules, Speakup will only be
> +able to speak some of the bootup messages if your system administrator
> +has configured the system to load the modules at boo time. The modules
> +can  be loaded after the file systems have been checked and mounted, or
> +from an initrd.  There is a third possibility.  Speakup can be compiled
> +with some components built into the kernel, and others as modules.  As
> +we'll see in the next section, this is particularly useful when you are
> +working with software synthesizers.
> +
> +If Speakup is completely compiled as modules, then you must use the
> +modprobe command to load Speakup.  You do this by loading the module for
> +the synthesizer driver you wish to use.  The driver modules are all
> +named speakup_<keyword>, where <keyword> is the keyword for the
> +synthesizer you want.  So, in order to load the driver for the DecTalk
> +Express, you would type the following command::
> +
> +  modprobe speakup_dectlk
> +
> +Issuing this command would load the DecTalk Express driver and all other
> +related Speakup modules necessary to get Speakup up and running.
> +
> +To completely unload Speakup, again presuming that it is entirely built
> +as modules, you would give the command::
> +
> +  modprobe -r speakup_dectlk
> +
> +The above command assumes you were running a DecTalk Express.  If you
> +were using a different synth, then you would substitute its keyword in
> +place of `dectlk`.
> +
> +If you have multiple drivers loaded, you need to unload all of them, in
> +order to completely unload Speakup.
> +For example, if you have loaded both the dectlk and ltlk drivers, use the
> +command::
> +
> +  modprobe -r speakup_dectlk speakup_ltlk
> +
> +You cannot unload the driver for software synthesizers when a user-space
> +daemon is using ``/dev/softsynth``.  First, kill the daemon.  Next, remove
> +the driver with the command::
> +
> +  modprobe -r speakup_soft
> +
> +Now, suppose we have a situation where the main Speakup component
> +is built into the kernel, and some or all of the drivers are built as
> +modules.  Since the main part of Speakup is compiled into the kernel, a
> +partial Speakup sys system has been created which we can take advantage
> +of by simply echoing the synthesizer keyword into the
> +``/speakup/synth`` sys entry.  This will cause the kernel to
> +automatically load the appropriate driver module, and start Speakup
> +talking.  To switch to another synth, just echo a new keyword to the
> +synth sys entry.  For example, to load the DoubleTalk LT driver,
> +you would type::
> +
> +  echo ltlk >/speakup/synth
> +
> +You can use the ``modprobe -r`` command to unload driver modules, regardless
> +of whether the main part of Speakup has been built into the kernel or
> +not.
> +
> +
> +8.  Using Software Synthesizers
> +===============================
> +
> +Using a software synthesizer requires that some other software be
> +installed and running on your system.  For this reason, software
> +synthesizers are not available for use at bootup, or during a system
> +installation process.
> +There are two freely-available solutions for software speech: Espeakup and
> +Speech Dispatcher.
> +These are described in subsections `8.1. Espeakup`_ and
> +`8.2. Speech Dispatcher`_, respectively.
> +
> +During the rest of this section, we assume that `speakup_soft` is either
> +built in to your kernel, or loaded as a module.
> +
> +If your system does not have udev installed , before you can use a
> +software synthesizer, you must have created the ``/dev/softsynth`` device.
> +If you have not already done so, issue the following commands as root::
> +
> +  cd /dev
> +  mknod softsynth c 10 26
> +
> +While we are at it, we might just as well create the ``/dev/synth`` device,
> +which can be used to let user space programs send information to your
> +synthesizer.  To create ``/dev/synth``, change to the ``/dev`` directory, and
> +issue the following command as root::
> +
> +  mknod synth c 10 25
> +
> +of both.
> +
> +8.1. Espeakup
> +-------------
> +
> +Espeakup is a connector between Speakup and the eSpeak software synthesizer.
> +Espeakup may already be available as a package for your distribution
> +of Linux.  If it is not packaged, you need to install it manually.
> +You can find it in the ``contrib/`` subdirectory of the Speakup sources.
> +The filename is ``espeakup-$VERSION.tar.bz2``, where ``$VERSION``
> +depends on the current release of Espeakup.  The Speakup 3.1.2 source
> +ships with version 0.71 of Espeakup.
> +The README file included with the Espeakup sources describes the process
> +of manual installation.
> +
> +Assuming that Espeakup is installed, either by the user or by the distributor,
> +follow these steps to use it.
> +
> +Tell Speakup to use the "soft driver::
> +
> +  echo soft > /speakup/synth
> +
> +Finally, start the espeakup program.  There are two ways to do it.
> +Both require root privileges.
> +
> +If Espeakup was installed as a package for your Linux distribution,
> +you probably have a distribution-specific script that controls the operation
> +of the daemon.  Look for a file named espeakup under ``/etc/init.d`` or
> +``/etc/rc.d``.  Execute the following command with root privileges::
> +
> +  /etc/init.d/espeakup start
> +
> +Replace ``init.d`` with ``rc.d``, if your distribution uses scripts located
> +under ``/etc/rc.d``.
> +Your distribution will also have a procedure for starting daemons at
> +boot-time, so it is possible to have software speech as soon as user-space
> +daemons are started by the bootup scripts.
> +These procedures are not described in this document.
> +
> +If you built Espeakup manually, the ``make install`` step placed the binary
> +under ``/usr/bin``.
> +Run the following command as root::
> +
> +  /usr/bin/espeakup
> +
> +Espeakup should start speaking.
> +
> +8.2. Speech Dispatcher
> +----------------------
> +
> +For this option, you must have a package called
> +Speech Dispatcher running on your system, and it must be configured to
> +work with one of its supported software synthesizers.
> +
> +Two open source synthesizers you might use are Flite and Festival.  You
> +might also choose to purchase the Software DecTalk from Fonix Sales Inc.
> +If you run a google search for Fonix, you'll find their web site.
> +
> +You can obtain a copy of Speech Dispatcher from free(b)soft at
> +http://www.freebsoft.org/.  Follow the installation instructions that
> +come with Speech Dispatcher in order to install and configure Speech
> +Dispatcher.  You can check out the web site for your Linux distribution
> +in order to get a copy of either Flite or Festival.  Your Linux
> +distribution may also have a precompiled Speech Dispatcher package.
> +
> +Once you've installed, configured, and tested Speech Dispatcher with your
> +chosen software synthesizer, you still need one more piece of software
> +in order to make things work.  You need a package called speechd-up.
> +You get it from the free(b)soft web site mentioned above.  After you've
> +compiled and installed speechd-up, you are almost ready to begin using
> +your software synthesizer.
> +
> +Now you can begin using your software synthesizer.  In order to do so,
> +echo the soft keyword to the synth sys entry like this::
> +
> +  echo soft >/speakup/synth
> +
> +Next run the speechd_up command like this::
> +
> +  speechd_up &
> +
> +Your synth should now start talking, and you should be able to adjust
> +the pitch, rate, etc.
> +
> +
> +9.  Using The DecTalk PC Card
> +=============================
> +
> +The DecTalk PC card is an ISA card that is inserted into one of the ISA
> +slots in your computer.  It requires that the DecTalk PC software be
> +installed on your computer, and that the software be loaded onto the
> +Dectalk PC card before it can be used.
> +
> +You can get the ``dec_pc.tgz`` file from the linux-speakup.org site.  The
> +``dec_pc.tgz`` file is in the ``~ftp/pub/linux/speakup`` directory.
> +
> +After you have downloaded the ``dec_pc.tgz`` file, untar it in your home
> +directory, and read the Readme file in the newly created ``dec_pc``
> +directory.
> +
> +The easiest way to get the software working is to copy the entire ``dec_pc``
> +directory into ``/user/local/lib``.  To do this, su to root in your home
> +directory, and issue the command::
> +
> +  cp dec_pc /usr/local/lib
> +
> +You will need to copy the dtload command from the dec_pc directory to a
> +directory in your path. Either ``/usr/bin`` or ``/usr/local/bin`` is a
> +good choice.
> +
> +You can now run the dtload command in order to load the DecTalk PC
> +software onto the card.  After you have done this, ``echo`` the decpc
> +keyword to the synth entry in the sys system like this::
> +
> +  echo decpc >/speakup/synth
> +
> +Your DecTalk PC should start talking, and then you can adjust the pitch,
> +rate, volume, voice, etc.  The voice entry in the Speakup sys system
> +will accept a number from 0 through 7 for the DecTalk PC synthesizer,
> +which will give you access to some of the DecTalk voices.
> +
> +
> +10.  Using Cursor Tracking
> +==========================
> +
> +In Speakup version 2.0 and later, cursor tracking is turned on by
> +default.  This means that when you are using an editor, Speakup will
> +automatically speak characters as you move left and right with the
> +cursor keys, and lines as you move up and down with the cursor keys.
> +This is the traditional sort of cursor tracking.
> +Recent versions of Speakup provide two additional ways to control the
> +text that is spoken when the cursor is moved:
> +"highlight tracking" and "read window."
> +They are described later in this section.
> +Sometimes, these modes get in your way, so you can disable cursor tracking
> +altogether.
> +
> +You may select among the various forms of cursor tracking using the keypad
> +asterisk key.
> +Each time you press this key, a new mode is selected, and Speakup speaks
> +the name of the new mode.  The names for the four possible states of cursor
> +tracking are: "cursoring on", "highlight tracking", "read window",
> +and "cursoring off."  The keypad asterisk key moves through the list of
> +modes in a circular fashion.
> +
> +If highlight tracking is enabled, Speakup tracks highlighted text,
> +rather than the cursor itself. When you move the cursor with the arrow keys,
> +Speakup speaks the currently highlighted information.
> +This is useful when moving through various menus and dialog boxes.
> +If cursor tracking isn't helping you while navigating a menu,
> +try highlight tracking.
> +
> +With the "read window" variety of cursor tracking, you can limit the text
> +that Speakup speaks by specifying a window of interest on the screen.
> +See section 15 for a description of the process of defining windows.
> +When you move the cursor via the arrow keys, Speakup only speaks
> +the contents of the window.  This is especially helpful when you are hearing
> +superfluous speech.  Consider the following example.
> +
> +Suppose that you are at a shell prompt.  You use bash, and you want to
> +explore your command history using the up and down arrow keys.  If you
> +have enabled cursor tracking, you will hear two pieces of information.
> +Speakup speaks both your shell prompt and the current entry from the
> +command history.  You may not want to hear the prompt repeated
> +each time you move, so you can silence it by specifying a window.  Find
> +the last line of text on the screen.  Clear the current window by pressing
> +the key combination speakup `f3`.  Use the review cursor to find the first
> +character that follows your shell prompt.  Press speakup + `f2` twice, to
> +define a one-line window.  The boundaries of the window are the
> +character following the shell prompt and the end of the line.  Now, cycle
> +through the cursor tracking modes using keypad asterisk, until Speakup
> +says "read window."  Move through your history using your arrow keys.
> +You will notice that Speakup no longer speaks the redundant prompt.
> +
> +Some folks like to turn cursor tracking off while they are using the
> +lynx web browser.  You definitely want to turn cursor tracking off when
> +you are using the alsamixer application.  Otherwise, you won't be able
> +to hear your mixer settings while you are using the arrow keys.
> +
> +
> +11.  Cut and Paste
> +==================
> +
> +One of Speakup's more useful features is the ability to cut and paste
> +text on the screen.  This means that you can capture information from a
> +program, and paste that captured text into a different place in the
> +program, or into an entirely different program, which may even be
> +running on a different console.
> +
> +For example, in this manual, we have made references to several web
> +sites.  It would be nice if you could cut and paste these urls into your
> +web browser.  Speakup does this quite nicely.  Suppose you wanted to
> +past the following url into your browser:
> +
> +http://linux-speakup.org/
> +
> +Use the speakup review keys to position the reading cursor on the first
> +character of the above url.  When the reading cursor is in position,
> +press the keypad slash key once.  Speakup will say, "mark".  Next,
> +position the reading cursor on the rightmost character of the above
> +url. Press the keypad slash key once again to actually cut the text
> +from the screen.  Speakup will say, "cut".  Although we call this
> +cutting, Speakup does not actually delete the cut text from the screen.
> +It makes a copy of the text in a special buffer for later pasting.
> +
> +Now that you have the url cut from the screen, you can paste it into
> +your browser, or even paste the url on a command line as an argument to
> +your browser.
> +
> +Suppose you want to start lynx and go to the Speakup site.
> +
> +You can switch to a different console with the alt left and right
> +arrows, or you can switch to a specific console by typing alt and a
> +function key.  These are not Speakup commands, just standard Linux
> +console capabilities.
> +
> +Once you've changed to an appropriate console, and are at a shell prompt,
> +type the word lynx, followed by a space.  Now press and hold the speakup
> +key, while you type the keypad slash character.  The url will be pasted
> +onto the command line, just as though you had typed it in.  Press the
> +enter key to execute the command.
> +
> +The paste buffer will continue to hold the cut information, until a new
> +mark and cut operation is carried out.  This means you can paste the cut
> +information as many times as you like before doing another cut
> +operation.
> +
> +You are not limited to cutting and pasting only one line on the screen.
> +You can also cut and paste rectangular regions of the screen.  Just
> +position the reading cursor at the top left corner of the text to be
> +cut, mark it with the keypad slash key, then position the reading cursor
> +at the bottom right corner of the region to be cut, and cut it with the
> +keypad slash key.
> +
> +
> +12.  Changing the Pronunciation of Characters
> +=============================================
> +
> +Through the ``/speakup/i18n/characters`` sys entry, Speakup gives you the
> +ability to change how Speakup pronounces a given character.  You could,
> +for example, change how some punctuation characters are spoken.  You can
> +even change how Speakup will pronounce certain letters.
> +
> +You may, for example, wish to change how Speakup pronounces the z
> +character.  The author of Speakup, Kirk Reiser, is Canadian, and thus
> +believes that the z should be pronounced zed.  If you are an American,
> +you might wish to use the zee pronunciation instead of zed.  You can
> +change the pronunciation of both the upper and lower case z with the
> +following two commands::
> +
> +  echo 90 zee >/speakup/characters
> +  echo 122 zee >/speakup/characters
> +
> +Let's examine the parts of the two previous commands.  They are issued
> +at the shell prompt, and could be placed in a startup script.
> +
> +The word echo tells the shell that you want to have it display the
> +string of characters that follow the word echo.  If you were to just
> +type::
> +
> +  echo hello.
> +
> +You would get the word hello printed on your screen as soon as you
> +pressed the enter key.  In this case, we are echoing strings that we
> +want to be redirected into the sys system.
> +
> +The numbers 90 and 122 in the above echo commands are the ascii numeric
> +values for the upper and lower case z, the characters we wish to change.
> +
> +The string zee is the pronunciation that we want Speakup to use for the
> +upper and lower case z.
> +
> +The ``>`` symbol redirects the output of the echo command to a file, just
> +like in DOS, or at the Windows command prompt.
> +
> +And finally, ``/speakup/i18n/characters`` is the file entry in the sys system
> +where we want the output to be directed.  Speakup looks at the numeric
> +value of the character we want to change, and inserts the pronunciation
> +string into an internal table.
> +
> +You can look at the whole table with the following command::
> +
> +  cat /speakup/i18n/characters
> +
> +Speakup will then print out the entire character pronunciation table.  I
> +won't display it here, but leave you to look at it at your convenience.
> +
> +
> +13.  Mapping Keys
> +=================
> +
> +Speakup has the capability of allowing you to assign or "map" keys to
> +internal Speakup commands.  This section necessarily assumes you have a
> +Linux kernel source tree installed, and that it has been patched and
> +configured with Speakup.  How you do this is beyond the scope of this
> +manual.  For this information, visit the Speakup web site at
> +http://linux-speakup.org/.  The reason you'll need the kernel source
> +tree patched with Speakup is that the genmap utility you'll need for
> +processing keymaps is in the
> +``/usr/src/linux-<version_number>/drivers/char/speakup`` directory.  The
> +``<version_number>`` in the above directory path is the version number of
> +the Linux source tree you are working with.
> +
> +So ok, you've gone off and gotten your kernel source tree, and patched
> +and configured it.  Now you can start manipulating keymaps.
> +
> +You can either use the
> +``/usr/src/linux-<version_number>/drivers/char/speakup/speakupmap.map`` file
> +included with the Speakup source, or you can cut and paste the copy in
> +section 4 into a separate file.  If you use the one in the Speakup
> +source tree, make sure you make a backup of it before you start making
> +changes.  You have been warned!
> +
> +Suppose that you want to swap the key assignments for the Speakup
> +say_last_char and the Speakup say_first_char commands.  The
> +speakupmap.map lists the key mappings for these two commands as follows::
> +
> +  spk key_pageup = say_first_char
> +  spk key_pagedown = say_last_char
> +
> +You can edit your copy of the speakupmap.map file and swap the command
> +names on the right side of the ``=`` (equals) sign.  You did make a backup,
> +right?  The new keymap lines would look like this::
> +
> +  spk key_pageup = say_last_char
> +  spk key_pagedown = say_first_char
> +
> +After you edit your copy of the speakupmap.map file, save it under a new
> +file name, perhaps newmap.map.  Then exit your editor and return to the
> +shell prompt.
> +
> +You are now ready to load your keymap with your swapped key assignments.
> +Assuming that you saved your new keymap as the file newmap.map, you
> +would load your keymap into the sys system like this::
> +
> +  /usr/src/linux-<version_number>/drivers/char/speakup/genmap newmap.map >/speakup/keymap
> +
> +
> +.. note::
> +
> +  Remember to substitute your kernel version number for the
> +  ``<version_number>`` in the above command.
> +
> +Your say first and say last characters should now be swapped.  Pressing
> +speakup pagedown should read you the first non-whitespace character on
> +the line your reading cursor is in, and pressing speakup pageup should
> +read you the last character on the line your reading cursor is in.
> +
> +.. note::
> +
> +  These new mappings will only stay in effect until you reboot,
> +  or until you load another keymap.
> +
> +One final warning.  If you try to load a partial map, you will quickly
> +find that all the mappings you didn't include in your file got deleted
> +from the working map.  Be extremely careful, and always make a backup!
> +You have been warned!
> +
> +
> +14.  Internationalizing Speakup
> +===============================
> +
> +Speakup indicates various conditions to the user by speaking messages.
> +For instance, when you move to the left edge of the screen with the
> +review keys, Speakup says, "left."
> +Prior to version 3.1.0 of Speakup, all of these messages were in English,
> +and they could not be changed.  If you used a non-English synthesizer,
> +you still heard English messages, such as "left" and "cursoring on."
> +In version 3.1.0 or higher, one may load translations for the various
> +messages via the ``/sys`` filesystem.
> +
> +The directory ``/speakup/i18n`` contains several collections of messages.
> +Each group of messages is stored in its own file.
> +The following section lists all of these files, along with a brief description
> +of each.
> +
> +14.1.  Files Under the i18n Subdirectory
> +----------------------------------------
> +
> +announcements
> +  This file contains various general announcements, most of which cannot
> +  be categorized.  You will find messages such as "You killed Speakup",
> +  "I'm alive", "leaving help", "parked", "unparked", and others.
> +  You will also find the names of the screen edges and cursor tracking modes
> +  here.
> +
> +characters
> +  See `12.  Changing the Pronunciation of Characters`_ for a description
> +  of this file.
> +
> +chartab
> +  See `12.  Changing the Pronunciation of Characters`_.  Unlike the rest
> +  of the files in the i18n subdirectory, this one does not contain messages
> +  to be spoken.
> +
> +colors
> +  When you use the "say attributes" function, Speakup says the name of the
> +  foreground and background colors.  These names come from the i18n/colors
> +  file.
> +
> +ctl_keys
> +  Here, you will find names of control keys.  These are used with Speakup's
> +  say_control feature.
> +
> +formatted
> +  This group of messages contains embedded formatting codes, to specify
> +  the type and width of displayed data.  If you change these, you must
> +  preserve all of the formatting codes, and they must appear in the order
> +  used by the default messages.
> +
> +function_names
> +  Here, you will find a list of names for Speakup functions.  These are used
> +  by the help system.  For example, suppose that you have activated help mode,
> +  and you pressed keypad 3.  Speakup says:
> +  "keypad 3 is character, say next."
> +  The message "character, say next" names a Speakup function, and it
> +  comes from this function_names file.
> +
> +key_names
> +  Again, key_names is used by Speakup's help system.  In the previous
> +  example, Speakup said that you pressed "keypad 3."
> +  This name came from the key_names file.
> +
> +states
> +  This file contains names for key states.
> +  Again, these are part of the help system.  For instance, if you had pressed
> +  speakup + keypad 3, you would hear:
> +  "speakup keypad 3 is go to bottom edge."
> +  The speakup key is depressed, so the name of the key state is speakup.
> +  This part of the message comes from the states collection.
> +
> +14.2.1.  Loading Your Own Messages
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The files under the i18n subdirectory all follow the same format.
> +They consist of lines, with one message per line.
> +Each message is represented by a number, followed by the text of the message.
> +The number is the position of the message in the given collection.
> +For example, if you view the file ``/speakup/i18n/colors``, you will see the
> +following list::
> +
> +  0 - black
> +  1 - blue
> +  2 - green
> +  3 - cyan
> +  4 - red
> +  5 - magenta
> +  6 - yellow
> +  7 - white
> +  8 - grey
> +
> +You can change one message, or you can change a whole group.
> +To load a whole collection of messages from a new source, simply use
> +the cp command::
> +
> +  cp ~/my_colors /speakup/i18n/colors
> +
> +You can change an individual message with the echo command,
> +as shown in the following example.
> +
> +The Spanish name for the color blue is azul.
> +Looking at the colors file, we see that the name "blue" is at position 1
> +within the colors group.  Let's change blue to azul::
> +
> +  echo '1 azul' > /speakup/i18n/colors
> +
> +The next time that Speakup says message 1 from the colors group, it will
> +say "azul", rather than "blue."
> +
> +14.2.2. Choose a language
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +In the future, translations into various languages will be made available,
> +and most users will just load the files necessary for their language. So far,
> +only French language is available beyond native Canadian English language.
> +
> +French is only available after you are logged in.
> +
> +Canadian English is the default language. To toggle another language,
> +download the source of Speakup and untar it in your home directory. The
> +following command should let you do this::
> +
> +  tar xvjf speakup-<version>.tar.bz2
> +
> +where ``<version>`` is the version number of the application.
> +
> +Next, change to the newly created directory, then into the tools/ directory, and
> +run the script speakup_setlocale. You are asked the language that you want to
> +use. Type the number associated to your language (e.g. fr for French) then press
> +Enter. Needed files are copied in the i18n directory.
> +
> +Note: the speakupconf must be installed on your system so that settings are saved.
> +Otherwise, you will have an error: your language will be loaded but you will
> +have to run the script again every time Speakup restarts.
> +See section 16.1. for information about speakupconf.
> +
> +You will have to repeat these steps for any change of locale, i.e. if you wish
> +change the speakup's language or charset (iso-8859-15 ou UTF-8).
> +
> +If you wish store the settings, note that at your next login, you will need to
> +do::
> +
> +  speakup load
> +
> +Alternatively, you can add the above line to your file
> +``~/.bashrc`` or ``~/.bash_profile``.
> +
> +If your system administrator ran himself the script, all the users will be able
> +to change from English to the language choosed by root and do directly
> +speakupconf load (or add this to the ``~/.bashrc`` or
> +``~/.bash_profile`` file). If there are several languages to handle, the
> +administrator (or every user) will have to run the first steps until speakupconf
> +save, choosing the appropriate language, in every user's home directory. Every
> +user will then be able to do speakupconf load, Speakup will load his own settings.
> +
> +14.3.  No Support for Non-Western-European Languages
> +----------------------------------------------------
> +
> +As of the current release, Speakup only supports Western European languages.
> +Support for the extended characters used by languages outside of the Western
> +European family of languages is a work in progress.
> +
> +
> +15.  Using Speakup's Windowing Capability
> +=========================================
> +
> +Speakup has the capability of defining and manipulating windows on the
> +screen.  Speakup uses the term "Window", to mean a user defined area of
> +the screen.  The key strokes for defining and manipulating Speakup
> +windows are as follows::
> +
> +  speakup + f2 -- Set the bounds of the window.
> +  Speakup + f3 -- clear the current window definition.
> +  speakup + f4 -- Toggle window silence on and off.
> +  speakup + keypad plus -- Say the currently defined window.
> +
> +These capabilities are useful for tracking a certain part of the screen
> +without rereading the whole screen, or for silencing a part of the
> +screen that is constantly changing, such as a clock or status line.
> +
> +There is no way to save these window settings, and you can only have one
> +window defined for each virtual console.  There is also no way to have
> +windows automatically defined for specific applications.
> +
> +In order to define a window, use the review keys to move your reading
> +cursor to the beginning of the area you want to define.  Then press
> +speakup + `f2`.  Speakup will tell you that the window starts at the
> +indicated row and column position.  Then move the reading cursor to the
> +end of the area to be defined as a window, and press speakup + `f2` again.
> +If there is more than one line in the window, Speakup will tell you
> +that the window ends at the indicated row and column position.  If there
> +is only one line in the window, then Speakup will tell you that the
> +window is the specified line on the screen.  If you are only defining a
> +one line window, you can just press speakup + `f2` twice after placing the
> +reading cursor on the line you want to define as a window.  It is not
> +necessary to position the reading cursor at the end of the line in order
> +to define the whole line as a window.
> +
> +
> +16.  Tools for Controlling Speakup
> +==================================
> +
> +The speakup distribution includes extra tools (in the tools directory)
> +which were written to make speakup easier to use.  This section will
> +briefly describe the use of these tools.
> +
> +16.1.  Speakupconf
> +------------------
> +
> +speakupconf began life as a contribution from Steve Holmes, a member of
> +the speakup community.  We would like to thank him for his work on the
> +early versions of this project.
> +
> +This script may be installed as part of your linux distribution, but if
> +it isn't, the recommended places to put it are ``/usr/local/bin`` or
> +``/usr/bin``.  This script can be run by any user, so it does not require
> +root privileges.
> +
> +Speakupconf allows you to save and load your Speakup settings.  It works
> +by reading and writing the ``/sys`` files described above.
> +
> +The directory that speakupconf uses to store your settings depends on
> +whether it is run from the root account.  If you execute speakupconf as
> +root, it uses the directory ``/etc/speakup``.  Otherwise, it uses the directory
> +``~/.speakup``, where ``~`` is your home directory.
> +Anyone who needs to use Speakup from your console can load his own custom
> +settings with this script.
> +
> +speakupconf takes one required argument: load or save.
> +Use the command::
> +
> +  speakupconf save
> +
> +to save your Speakup settings, and::
> +
> +  speakupconf load
> +
> +to load them into Speakup.
> +
> +A second argument may be specified to use an alternate directory to
> +load or save the speakup parameters.
> +
> +16.2.  Talkwith
> +---------------
> +
> +Charles Hallenbeck, another member of the speakup community, wrote the
> +initial versions of this script, and we would also like to thank him for
> +his work on it.
> +
> +This script needs root privileges to run, so if it is not installed as
> +part of your linux distribution, the recommended places to install it
> +are ``/usr/local/sbin`` or ``/usr/sbin``.
> +
> +Talkwith allows you to switch synthesizers on the fly.  It takes a synthesizer
> +name as an argument.  For instance,
> +talkwith dectlk
> +causes Speakup to use the DecTalk Express.  If you wish to switch to a
> +software synthesizer, you must also indicate which daemon you wish to
> +use.  There are two possible choices:
> +spd and espeakup.  spd is an abbreviation for speechd-up.
> +If you wish to use espeakup for software synthesis, give the command
> +talkwith soft espeakup
> +To use speechd-up, type::
> +
> +  talkwith soft spd
> +
> +Any arguments that follow the name of the daemon are passed to the daemon
> +when it is invoked.  For instance::
> +
> +  talkwith espeakup --default-voice=fr
> +
> +causes espeakup to use the French voice.
> +
> +.. note::
> +
> +  Talkwith must always be executed with root privileges.
> +
> +Talkwith does not attempt to load your settings after the new
> +synthesizer is activated.  You can use speakupconf to load your settings
> +if desired.
> +
> +
> +
> diff --git a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt
> deleted file mode 100644
> index 977ab3f5a0a8..000000000000
> --- a/Documentation/admin-guide/spkguide.txt
> +++ /dev/null
> @@ -1,1620 +0,0 @@
> -
> -The Speakup User's Guide
> -For Speakup 3.1.2 and Later
> -By Gene Collins
> -Updated by others
> -Last modified on Mon Sep 27 14:26:31 2010
> -Document version 1.3
> -
> -Copyright (c) 2005  Gene Collins
> -Copyright (c) 2008  Samuel Thibault
> -Copyright (c) 2009, 2010  the Speakup Team
> -
> -Permission is granted to copy, distribute and/or modify this document
> -under the terms of the GNU Free Documentation License, Version 1.2 or
> -any later version published by the Free Software Foundation; with no
> -Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A
> -copy of the license is included in the section entitled "GNU Free
> -Documentation License".
> -
> -Preface
> -
> -The purpose of this document is to familiarize users with the user
> -interface to Speakup, a Linux Screen Reader.  If you need instructions
> -for installing or obtaining Speakup, visit the web site at
> -http://linux-speakup.org/.  Speakup is a set of patches to the standard
> -Linux kernel source tree.  It can be built as a series of modules, or as
> -a part of a monolithic kernel.  These details are beyond the scope of
> -this manual, but the user may need to be aware of the module
> -capabilities, depending on how your system administrator has installed
> -Speakup.  If Speakup is built as a part of a monolithic kernel, and the
> -user is using a hardware synthesizer, then Speakup will be able to
> -provide speech access from the time the kernel is loaded, until the time
> -the system is shutdown.  This means that if you have obtained Linux
> -installation media for a distribution which includes Speakup as a part
> -of its kernel, you will be able, as a blind person, to install Linux
> -with speech access unaided by a sighted person.  Again, these details
> -are beyond the scope of this manual, but the user should be aware of
> -them.  See the web site mentioned above for further details.
> -
> -1.  Starting Speakup
> -
> -If your system administrator has installed Speakup to work with your
> -specific synthesizer by default, then all you need to do to use Speakup
> -is to boot your system, and Speakup should come up talking.  This
> -assumes of course  that your synthesizer is a supported hardware
> -synthesizer, and that it is either installed in or connected to your
> -system, and is if necessary powered on.
> -
> -It is possible, however, that Speakup may have been compiled into the
> -kernel with no default synthesizer.  It is even possible that your
> -kernel has been compiled with support for some of the supported
> -synthesizers and not others.  If you find that this is the case, and
> -your synthesizer is supported but not available, complain to the person
> -who compiled and installed your kernel.  Or better yet, go to the web
> -site, and learn how to patch Speakup into your own kernel source, and
> -build and install your own kernel.
> -
> -If your kernel has been compiled with Speakup, and has no default
> -synthesizer set, or you would like to use a different synthesizer than
> -the default one, then you may issue the following command at the boot
> -prompt of your boot loader.
> -
> -linux speakup.synth=ltlk
> -
> -This command would tell Speakup to look for and use a LiteTalk or
> -DoubleTalk LT at boot up.  You may replace the ltlk synthesizer keyword
> -with the keyword for whatever synthesizer you wish to use.  The
> -speakup.synth parameter will accept the following keywords, provided
> -that support for the related synthesizers has been built into the
> -kernel.
> -
> -acntsa -- Accent SA
> -acntpc -- Accent PC
> -apollo -- Apollo
> -audptr -- Audapter
> -bns -- Braille 'n Speak
> -dectlk -- DecTalk Express (old and new, db9 serial only)
> -decext -- DecTalk (old) External
> -dtlk -- DoubleTalk PC
> -keypc -- Keynote Gold PC
> -ltlk -- DoubleTalk LT, LiteTalk, or external Tripletalk (db9 serial only)
> -spkout -- Speak Out
> -txprt -- Transport
> -dummy -- Plain text terminal
> -
> -Note: Speakup does * NOT * support usb connections!  Speakup also does *
> -NOT * support the internal Tripletalk!
> -
> -Speakup does support two other synthesizers, but because they work in
> -conjunction with other software, they must be loaded as modules after
> -their related software is loaded, and so are not available at boot up.
> -These are as follows:
> -
> -decpc -- DecTalk PC (not available at boot up)
> -soft -- One of several software synthesizers (not available at boot up)
> -
> -See the sections on loading modules and software synthesizers later in
> -this manual for further details.  It should be noted here that the
> -speakup.synth boot parameter will have no effect if Speakup has been
> -compiled as modules.  In order for Speakup modules to be loaded during
> -the boot process, such action must be configured by your system
> -administrator.  This will mean that you will hear some, but not all,  of
> -the bootup messages.
> -
> -2.  Basic operation
> -
> -Once you have booted the system, and if necessary, have supplied the
> -proper bootup parameter for your synthesizer, Speakup will begin
> -talking as soon as the kernel is loaded.  In fact, it will talk a lot!
> -It will speak all the boot up messages that the kernel prints on the
> -screen during the boot process.  This is because Speakup is not a
> -separate screen reader, but is actually built into the operating
> -system.  Since almost all console applications must print text on the
> -screen using the kernel, and must get their keyboard input through the
> -kernel, they are automatically handled properly by Speakup.  There are a
> -few exceptions, but we'll come to those later.
> -
> -Note:  In this guide I will refer to the numeric keypad as the keypad.
> -This is done because the speakupmap.map file referred to later in this
> -manual uses the term keypad instead of numeric keypad.  Also I'm lazy
> -and would rather only type one word.  So keypad it is.  Got it?  Good.
> -
> -Most of the Speakup review keys are located on the keypad at the far
> -right of the keyboard.  The numlock key should be off, in order for these
> -to work.  If you toggle the numlock on, the keypad will produce numbers,
> -which is exactly what you want for spreadsheets and such.  For the
> -purposes of this guide, you should have the numlock turned off, which is
> -its default state at bootup.
> -
> -You probably won't want to listen to all the bootup messages every time
> -you start your system, though it's a good idea to listen to them at
> -least once, just so you'll know what kind of information is available to
> -you during the boot process.  You can always review these messages after
> -bootup with the command:
> -
> -dmesg | more
> -
> -In order to speed the boot process, and to silence the speaking of the
> -bootup messages, just press the keypad enter key.  This key is located
> -in the bottom right corner of the keypad.  Speakup will shut up and stay
> -that way, until you press another key.
> -
> -You can check to see if the boot process has completed by pressing the 8
> -key on the keypad, which reads the current line.  This also has the
> -effect of starting Speakup talking again, so you can press keypad enter
> -to silence it again if the boot process has not completed.
> -
> -When the boot process is complete, you will arrive at a "login" prompt.
> -At this point, you'll need to type in your user id and password, as
> -provided by your system administrator.  You will hear Speakup speak the
> -letters of your user id as you type it, but not the password.  This is
> -because the password is not displayed on the screen for security
> -reasons.  This has nothing to do with Speakup, it's a Linux security
> -feature.
> -
> -Once you've logged in, you can run any Linux command or program which is
> -allowed by your user id.  Normal users will not be able to run programs
> -which require root privileges.
> -
> -When you are running a program or command, Speakup will automatically
> -speak new text as it arrives on the screen.  You can at any time silence
> -the speech with keypad enter, or use any of the Speakup review keys.
> -
> -Here are some basic Speakup review keys, and a short description of what
> -they do.
> -
> -keypad 1 -- read previous character
> -keypad 2 -- read current character (pressing keypad 2 twice rapidly will speak
> -	the current character phonetically)
> -keypad 3 -- read next character
> -keypad 4 -- read previous word
> -keypad 5 -- read current word (press twice rapidly to spell the current word)
> -keypad 6 -- read next word
> -keypad 7 -- read previous line
> -keypad 8 -- read current line (press twice rapidly to hear how much the
> -	text on the current line is indented)
> -keypad 9 -- read next line
> -keypad period -- speak current cursor position and announce current
> -	virtual console
> -
> -It's also worth noting that the insert key on the keypad is mapped
> -as the speakup key.  Instead of pressing and releasing this key, as you
> -do under DOS or Windows, you hold it like a shift key, and press other
> -keys in combination with it.  For example, repeatedly holding keypad
> -insert, from now on called speakup, and keypad enter will toggle the
> -speaking of new text on the screen on and off.  This is not the same as
> -just pressing keypad enter by itself, which just silences the speech
> -until you hit another key.  When you hit speakup plus keypad enter,
> -Speakup will say, "You turned me off.", or "Hey, that's better."  When
> -Speakup is turned off, no new text on the screen will be spoken.  You
> -can still use the reading controls to review the screen however.
> -
> -3.  Using the Speakup Help System
> -
> -In order to enter the Speakup help system, press and hold the speakup
> -key (remember that this is the keypad insert key), and press the f1 key.
> -You will hear the message:
> -
> -"Press space to leave help, cursor up or down to scroll, or a letter to
> -go to commands in list."
> -
> -When you press the spacebar to leave the help system, you will hear:
> -
> -"Leaving help."
> -
> -While you are in the Speakup help system, you can scroll up or down
> -through the list of available commands using the cursor keys.  The list
> -of commands is arranged in alphabetical order.  If you wish to jump to
> -commands in a specific part of the alphabet, you may press the letter of
> -the alphabet you wish to jump to.
> -
> -You can also just explore by typing keyboard keys.  Pressing keys will
> -cause Speakup to speak the command associated with that key.  For
> -example, if you press the keypad 8 key, you will hear:
> -
> -"Keypad 8 is line, say current."
> -
> -You'll notice that some commands do not have keys assigned to them.
> -This is because they are very infrequently used commands, and are also
> -accessible through the sys system.  We'll discuss the sys system later
> -in this manual.
> -
> -You'll also notice that some commands have two keys assigned to them.
> -This is because Speakup has a built in set of alternative key bindings
> -for laptop users.  The alternate speakup key is the caps lock key.  You
> -can press and hold the caps lock key, while pressing an alternate
> -speakup command key to activate the command.  On most laptops, the
> -numeric keypad is defined as the keys in the j k l area of the keyboard.
> -
> -There is usually a function key which turns this keypad function on and
> -off, and some other key which controls the numlock state.  Toggling the
> -keypad functionality on and off can become a royal pain.  So, Speakup
> -gives you a simple way to get at an alternative set of key mappings for
> -your laptop.  These are also available by default on desktop systems,
> -because Speakup does not know whether it is running on a desktop or
> -laptop.  So you may choose which set of Speakup keys to use.  Some
> -system administrators may have chosen to compile Speakup for a desktop
> -system without this set of alternate key bindings, but these details are
> -beyond the scope of this manual.  To use the caps lock for its normal
> -purpose, hold the shift key while toggling the caps lock on and off.  We
> -should note here, that holding the caps lock key and pressing the z key
> -will toggle the alternate j k l keypad on and off.
> -
> -4.  Keys and Their Assigned Commands
> -
> -In this section, we'll go through a list of all the speakup keys and
> -commands.  You can also get a list of commands and assigned keys from
> -the help system.
> -
> -The following list was taken from the speakupmap.map file.  Key
> -assignments are on the left of the equal sign, and the associated
> -Speakup commands are on the right.  The designation "spk" means to press
> -and hold the speakup key, a.k.a. keypad insert, a.k.a. caps lock, while
> -pressing the other specified key.
> -
> -spk key_f9 = punc_level_dec
> -spk key_f10 = punc_level_inc
> -spk key_f11 = reading_punc_dec
> -spk key_f12 = reading_punc_inc
> -spk key_1 = vol_dec
> -spk key_2 =  vol_inc
> -spk key_3 = pitch_dec
> -spk key_4 = pitch_inc
> -spk key_5 = rate_dec
> -spk key_6 = rate_inc
> -key_kpasterisk = toggle_cursoring
> -spk key_kpasterisk = speakup_goto
> -spk key_f1 = speakup_help
> -spk key_f2 = set_win
> -spk key_f3 = clear_win
> -spk key_f4 = enable_win
> -spk key_f5 = edit_some
> -spk key_f6 = edit_most
> -spk key_f7 = edit_delim
> -spk key_f8 = edit_repeat
> -shift spk key_f9 = edit_exnum
> - key_kp7 = say_prev_line
> -spk key_kp7 = left_edge
> - key_kp8 = say_line
> -double  key_kp8 = say_line_indent
> -spk key_kp8 = say_from_top
> - key_kp9 = say_next_line
> -spk  key_kp9 = top_edge
> - key_kpminus = speakup_parked
> -spk key_kpminus = say_char_num
> - key_kp4 = say_prev_word
> -spk key_kp4 = say_from_left
> - key_kp5 = say_word
> -double key_kp5 = spell_word
> -spk key_kp5 = spell_phonetic
> - key_kp6 = say_next_word
> -spk key_kp6 = say_to_right
> - key_kpplus = say_screen
> -spk key_kpplus = say_win
> - key_kp1 = say_prev_char
> -spk key_kp1 = right_edge
> - key_kp2 = say_char
> -spk key_kp2 = say_to_bottom
> -double key_kp2 = say_phonetic_char
> - key_kp3 = say_next_char
> -spk  key_kp3 = bottom_edge
> - key_kp0 = spk_key
> - key_kpdot = say_position
> -spk key_kpdot = say_attributes
> -key_kpenter = speakup_quiet
> -spk key_kpenter = speakup_off
> -key_sysrq = speech_kill
> - key_kpslash = speakup_cut
> -spk key_kpslash = speakup_paste
> -spk key_pageup = say_first_char
> -spk key_pagedown = say_last_char
> -key_capslock = spk_key
> - spk key_z = spk_lock
> -key_leftmeta = spk_key
> -ctrl spk key_0 = speakup_goto
> -spk key_u = say_prev_line
> -spk key_i = say_line
> -double spk key_i = say_line_indent
> -spk key_o = say_next_line
> -spk key_minus = speakup_parked
> -shift spk key_minus = say_char_num
> -spk key_j = say_prev_word
> -spk key_k = say_word
> -double spk key_k = spell_word
> -spk key_l = say_next_word
> -spk key_m = say_prev_char
> -spk key_comma = say_char
> -double spk key_comma = say_phonetic_char
> -spk key_dot = say_next_char
> -spk key_n = say_position
> - ctrl spk key_m = left_edge
> - ctrl spk key_y = top_edge
> - ctrl spk key_dot = right_edge
> -ctrl spk key_p = bottom_edge
> -spk key_apostrophe = say_screen
> -spk key_h = say_from_left
> -spk key_y = say_from_top
> -spk key_semicolon = say_to_right
> -spk key_p = say_to_bottom
> -spk key_slash = say_attributes
> - spk key_enter = speakup_quiet
> - ctrl  spk key_enter = speakup_off
> - spk key_9 = speakup_cut
> -spk key_8 = speakup_paste
> -shift spk key_m = say_first_char
> - ctrl spk key_semicolon = say_last_char
> -spk key_r = read_all_doc
> -
> -5.  The Speakup Sys System
> -
> -The Speakup screen reader also creates a speakup subdirectory as a part
> -of the sys system.
> -
> -As a convenience, run as root
> -
> -ln -s /sys/accessibility/speakup /speakup
> -
> -to directly access speakup parameters from /speakup.
> -You can see these entries by typing the command:
> -
> -ls -1 /speakup/*
> -
> -If you issue the above ls command, you will get back something like
> -this:
> -
> -/speakup/attrib_bleep
> -/speakup/bell_pos
> -/speakup/bleep_time
> -/speakup/bleeps
> -/speakup/cursor_time
> -/speakup/delimiters
> -/speakup/ex_num
> -/speakup/key_echo
> -/speakup/keymap
> -/speakup/no_interrupt
> -/speakup/punc_all
> -/speakup/punc_level
> -/speakup/punc_most
> -/speakup/punc_some
> -/speakup/reading_punc
> -/speakup/repeats
> -/speakup/say_control
> -/speakup/say_word_ctl
> -/speakup/silent
> -/speakup/spell_delay
> -/speakup/synth
> -/speakup/synth_direct
> -/speakup/version
> -
> -/speakup/i18n:
> -announcements
> -characters
> -chartab
> -colors
> -ctl_keys
> -formatted
> -function_names
> -key_names
> -states
> -
> -/speakup/soft:
> -caps_start
> -caps_stop
> -delay_time
> -direct
> -freq
> -full_time
> -jiffy_delta
> -pitch
> -inflection
> -punct
> -rate
> -tone
> -trigger_time
> -voice
> -vol
> -
> -Notice the two subdirectories of /speakup: /speakup/i18n and
> -/speakup/soft.
> -The i18n subdirectory is described in a later section.
> -The files under /speakup/soft represent settings that are specific to the
> -driver for the software synthesizer.  If you use the LiteTalk, your
> -synthesizer-specific settings would be found in /speakup/ltlk.  In other words,
> -a subdirectory named /speakup/KWD is created to hold parameters specific
> -to the device whose keyword is KWD.
> -These parameters include volume, rate, pitch, and others.
> -
> -In addition to using the Speakup hot keys to change such things as
> -volume, pitch, and rate, you can also echo values to the appropriate
> -entry in the /speakup directory.  This is very useful, since it
> -lets you control Speakup parameters from within a script.  How you
> -would write such scripts is somewhat beyond the scope of this manual,
> -but I will include a couple of simple examples here to give you a
> -general idea of what such scripts can do.
> -
> -Suppose for example, that you wanted to control both the punctuation
> -level and the reading punctuation level at the same time.  For
> -simplicity, we'll call them punc0, punc1, punc2, and punc3.  The scripts
> -might look something like this:
> -
> -#!/bin/bash
> -# punc0
> -# set punc and reading punc levels to 0
> -echo 0 >/speakup/punc_level
> -echo 0 >/speakup/reading_punc
> -echo Punctuation level set to 0.
> -
> -#!/bin/bash
> -# punc1
> -# set punc and reading punc levels to 1
> -echo 1 >/speakup/punc_level
> -echo 1 >/speakup/reading_punc
> -echo Punctuation level set to 1.
> -
> -#!/bin/bash
> -# punc2
> -# set punc and reading punc levels to 2
> -echo 2 >/speakup/punc_level
> -echo 2 >/speakup/reading_punc
> -echo Punctuation level set to 2.
> -
> -#!/bin/bash
> -# punc3
> -# set punc and reading punc levels to 3
> -echo 3 >/speakup/punc_level
> -echo 3 >/speakup/reading_punc
> -echo Punctuation level set to 3.
> -
> -If you were to store these four small scripts in a directory in your
> -path, perhaps /usr/local/bin, and set the permissions to 755 with the
> -chmod command, then you could change the default reading punc and
> -punctuation levels at the same time by issuing just one command.  For
> -example, if you were to execute the punc3 command at your shell prompt,
> -then the reading punc and punc level would both get set to 3.
> -
> -I should note that the above scripts were written to work with bash, but
> -regardless of which shell you use, you should be able to do something
> -similar.
> -
> -The Speakup sys system also has another interesting use.  You can echo
> -Speakup parameters into the sys system in a script during system
> -startup, and speakup will return to your preferred parameters every time
> -the system is rebooted.
> -
> -Most of the Speakup sys parameters can be manipulated by a regular user
> -on the system.  However, there are a few parameters that are dangerous
> -enough that they should only be manipulated by the root user on your
> -system.  There are even some parameters that are read only, and cannot
> -be written to at all.  For example, the version entry in the Speakup
> -sys system is read only.  This is because there is no reason for a user
> -to tamper with the version number which is reported by Speakup.  Doing
> -an ls -l on /speakup/version will return this:
> -
> --r--r--r--    1 root     root            0 Mar 21 13:46 /speakup/version
> -
> -As you can see, the version entry in the Speakup sys system is read
> -only, is owned by root, and belongs to the root group.  Doing a cat of
> -/speakup/version will display the Speakup version number, like
> -this:
> -
> -cat /speakup/version
> -Speakup v-2.00 CVS: Thu Oct 21 10:38:21 EDT 2004
> -synth dtlk version 1.1
> -
> -The display shows the Speakup version number, along with the version
> -number of the driver for the current synthesizer.
> -
> -Looking at entries in the Speakup sys system can be useful in many
> -ways.  For example, you might wish to know what level your volume is set
> -at.  You could type:
> -
> -cat /speakup/KWD/vol
> -# Replace KWD with the keyword for your synthesizer, E.G., ltlk for LiteTalk.
> -5
> -
> -The number five which comes back is the level at which the synthesizer
> -volume is set at.
> -
> -All the entries in the Speakup sys system are readable, some are
> -writable by root only, and some are writable by everyone.  Unless you
> -know what you are doing, you should probably leave the ones that are
> -writable by root only alone.  Most of the names are self explanatory.
> -Vol for controlling volume, pitch for pitch, inflection for pitch range, rate
> -for controlling speaking rate, etc.  If you find one you aren't sure about, you
> -can post a query on the Speakup list.
> -
> -6.  Changing Synthesizers
> -
> -It is possible to change to a different synthesizer while speakup is
> -running.  In other words, it is not necessary to reboot the system
> -in order to use a different synthesizer.  You can simply echo the
> -synthesizer keyword to the /speakup/synth sys entry.
> -Depending on your situation, you may wish to echo none to the synth
> -sys entry, to disable speech while one synthesizer is disconnected and
> -a second one is connected in its place.  Then echo the keyword for the
> -new synthesizer into the synth sys entry in order to start speech
> -with the newly connected synthesizer.  See the list of synthesizer
> -keywords in section 1 to find the keyword which matches your synth.
> -
> -7.  Loading modules
> -
> -As mentioned earlier, Speakup can either be completely compiled into the
> -kernel, with the exception of the help module, or it can be compiled as
> -a series of modules.   When compiled as modules, Speakup will only be
> -able to speak some of the bootup messages if your system administrator
> -has configured the system to load the modules at boo time. The modules
> -can  be loaded after the file systems have been checked and mounted, or
> -from an initrd.  There is a third possibility.  Speakup can be compiled
> -with some components built into the kernel, and others as modules.  As
> -we'll see in the next section, this is particularly useful when you are
> -working with software synthesizers.
> -
> -If Speakup is completely compiled as modules, then you must use the
> -modprobe command to load Speakup.  You do this by loading the module for
> -the synthesizer driver you wish to use.  The driver modules are all
> -named speakup_<keyword>, where <keyword> is the keyword for the
> -synthesizer you want.  So, in order to load the driver for the DecTalk
> -Express, you would type the following command:
> -
> -modprobe speakup_dectlk
> -
> -Issuing this command would load the DecTalk Express driver and all other
> -related Speakup modules necessary to get Speakup up and running.
> -
> -To completely unload Speakup, again presuming that it is entirely built
> -as modules, you would give the command:
> -
> -modprobe -r speakup_dectlk
> -
> -The above command assumes you were running a DecTalk Express.  If you
> -were using a different synth, then you would substitute its keyword in
> -place of dectlk.
> -
> -If you have multiple drivers loaded, you need to unload all of them, in
> -order to completely unload Speakup.
> -For example, if you have loaded both the dectlk and ltlk drivers, use the
> -command:
> -modprobe -r speakup_dectlk speakup_ltlk
> -
> -You cannot unload the driver for software synthesizers when a user-space
> -daemon is using /dev/softsynth.  First, kill the daemon.  Next, remove
> -the driver with the command:
> -modprobe -r speakup_soft
> -
> -Now, suppose we have a situation where the main Speakup component
> -is built into the kernel, and some or all of the drivers are built as
> -modules.  Since the main part of Speakup is compiled into the kernel, a
> -partial Speakup sys system has been created which we can take advantage
> -of by simply echoing the synthesizer keyword into the
> -/speakup/synth sys entry.  This will cause the kernel to
> -automatically load the appropriate driver module, and start Speakup
> -talking.  To switch to another synth, just echo a new keyword to the
> -synth sys entry.  For example, to load the DoubleTalk LT driver,
> -you would type:
> -
> -echo ltlk >/speakup/synth
> -
> -You can use the modprobe -r command to unload driver modules, regardless
> -of whether the main part of Speakup has been built into the kernel or
> -not.
> -
> -8.  Using Software Synthesizers
> -
> -Using a software synthesizer requires that some other software be
> -installed and running on your system.  For this reason, software
> -synthesizers are not available for use at bootup, or during a system
> -installation process.
> -There are two freely-available solutions for software speech: Espeakup and
> -Speech Dispatcher.
> -These are described in subsections 8.1 and 8.2, respectively.
> -
> -During the rest of this section, we assume that speakup_soft is either
> -built in to your kernel, or loaded as a module.
> -
> -If your system does not have udev installed , before you can use a
> -software synthesizer, you must have created the /dev/softsynth device.
> -If you have not already done so, issue the following commands as root:
> -
> -cd /dev
> -mknod softsynth c 10 26
> -
> -While we are at it, we might just as well create the /dev/synth device,
> -which can be used to let user space programs send information to your
> -synthesizer.  To create /dev/synth, change to the /dev directory, and
> -issue the following command as root:
> -
> -mknod synth c 10 25
> -
> -of both.
> -
> -8.1. Espeakup
> -
> -Espeakup is a connector between Speakup and the eSpeak software synthesizer.
> -Espeakup may already be available as a package for your distribution
> -of Linux.  If it is not packaged, you need to install it manually.
> -You can find it in the contrib/ subdirectory of the Speakup sources.
> -The filename is espeakup-$VERSION.tar.bz2, where $VERSION
> -depends on the current release of Espeakup.  The Speakup 3.1.2 source
> -ships with version 0.71 of Espeakup.
> -The README file included with the Espeakup sources describes the process
> -of manual installation.
> -
> -Assuming that Espeakup is installed, either by the user or by the distributor,
> -follow these steps to use it.
> -
> -Tell Speakup to use the "soft driver:
> -echo soft > /speakup/synth
> -
> -Finally, start the espeakup program.  There are two ways to do it.
> -Both require root privileges.
> -
> -If Espeakup was installed as a package for your Linux distribution,
> -you probably have a distribution-specific script that controls the operation
> -of the daemon.  Look for a file named espeakup under /etc/init.d or
> -/etc/rc.d.  Execute the following command with root privileges:
> -/etc/init.d/espeakup start
> -Replace init.d with rc.d, if your distribution uses scripts located under
> -/etc/rc.d.
> -Your distribution will also have a procedure for starting daemons at
> -boot-time, so it is possible to have software speech as soon as user-space
> -daemons are started by the bootup scripts.
> -These procedures are not described in this document.
> -
> -If you built Espeakup manually, the "make install" step placed the binary
> -under /usr/bin.
> -Run the following command as root:
> -/usr/bin/espeakup
> -Espeakup should start speaking.
> -
> -8.2. Speech Dispatcher
> -
> -For this option, you must have a package called
> -Speech Dispatcher running on your system, and it must be configured to
> -work with one of its supported software synthesizers.
> -
> -Two open source synthesizers you might use are Flite and Festival.  You
> -might also choose to purchase the Software DecTalk from Fonix Sales Inc.
> -If you run a google search for Fonix, you'll find their web site.
> -
> -You can obtain a copy of Speech Dispatcher from free(b)soft at
> -http://www.freebsoft.org/.  Follow the installation instructions that
> -come with Speech Dispatcher in order to install and configure Speech
> -Dispatcher.  You can check out the web site for your Linux distribution
> -in order to get a copy of either Flite or Festival.  Your Linux
> -distribution may also have a precompiled Speech Dispatcher package.
> -
> -Once you've installed, configured, and tested Speech Dispatcher with your
> -chosen software synthesizer, you still need one more piece of software
> -in order to make things work.  You need a package called speechd-up.
> -You get it from the free(b)soft web site mentioned above.  After you've
> -compiled and installed speechd-up, you are almost ready to begin using
> -your software synthesizer.
> -
> -Now you can begin using your software synthesizer.  In order to do so,
> -echo the soft keyword to the synth sys entry like this:
> -
> -echo soft >/speakup/synth
> -
> -Next run the speechd_up command like this:
> -
> -speechd_up &
> -
> -Your synth should now start talking, and you should be able to adjust
> -the pitch, rate, etc.
> -
> -9.  Using The DecTalk PC Card
> -
> -The DecTalk PC card is an ISA card that is inserted into one of the ISA
> -slots in your computer.  It requires that the DecTalk PC software be
> -installed on your computer, and that the software be loaded onto the
> -Dectalk PC card before it can be used.
> -
> -You can get the dec_pc.tgz file from the linux-speakup.org site.  The
> -dec_pc.tgz file is in the ~ftp/pub/linux/speakup directory.
> -
> -After you have downloaded the dec_pc.tgz file, untar it in your home
> -directory, and read the Readme file in the newly created dec_pc
> -directory.
> -
> -The easiest way to get the software working is to copy the entire dec_pc
> -directory into /user/local/lib.  To do this, su to root in your home
> -directory, and issue the command:
> -
> -cp dec_pc /usr/local/lib
> -
> -You will need to copy the dtload command from the dec_pc directory to a
> -directory in your path.  Either /usr/bin or /usr/local/bin is a good
> -choice.
> -
> -You can now run the dtload command in order to load the DecTalk PC
> -software onto the card.  After you have done this, echo the decpc
> -keyword to the synth entry in the sys system like this:
> -
> -echo decpc >/speakup/synth
> -
> -Your DecTalk PC should start talking, and then you can adjust the pitch,
> -rate, volume, voice, etc.  The voice entry in the Speakup sys system
> -will accept a number from 0 through 7 for the DecTalk PC synthesizer,
> -which will give you access to some of the DecTalk voices.
> -
> -10.  Using Cursor Tracking
> -
> -In Speakup version 2.0 and later, cursor tracking is turned on by
> -default.  This means that when you are using an editor, Speakup will
> -automatically speak characters as you move left and right with the
> -cursor keys, and lines as you move up and down with the cursor keys.
> -This is the traditional sort of cursor tracking.
> -Recent versions of Speakup provide two additional ways to control the
> -text that is spoken when the cursor is moved:
> -"highlight tracking" and "read window."
> -They are described later in this section.
> -Sometimes, these modes get in your way, so you can disable cursor tracking
> -altogether.
> -
> -You may select among the various forms of cursor tracking using the keypad
> -asterisk key.
> -Each time you press this key, a new mode is selected, and Speakup speaks
> -the name of the new mode.  The names for the four possible states of cursor
> -tracking are: "cursoring on", "highlight tracking", "read window",
> -and "cursoring off."  The keypad asterisk key moves through the list of
> -modes in a circular fashion.
> -
> -If highlight tracking is enabled, Speakup tracks highlighted text,
> -rather than the cursor itself. When you move the cursor with the arrow keys,
> -Speakup speaks the currently highlighted information.
> -This is useful when moving through various menus and dialog boxes.
> -If cursor tracking isn't helping you while navigating a menu,
> -try highlight tracking.
> -
> -With the "read window" variety of cursor tracking, you can limit the text
> -that Speakup speaks by specifying a window of interest on the screen.
> -See section 15 for a description of the process of defining windows.
> -When you move the cursor via the arrow keys, Speakup only speaks
> -the contents of the window.  This is especially helpful when you are hearing
> -superfluous speech.  Consider the following example.
> -
> -Suppose that you are at a shell prompt.  You use bash, and you want to
> -explore your command history using the up and down arrow keys.  If you
> -have enabled cursor tracking, you will hear two pieces of information.
> -Speakup speaks both your shell prompt and the current entry from the
> -command history.  You may not want to hear the prompt repeated
> -each time you move, so you can silence it by specifying a window.  Find
> -the last line of text on the screen.  Clear the current window by pressing
> -the key combination speakup f3.  Use the review cursor to find the first
> -character that follows your shell prompt.  Press speakup + f2 twice, to
> -define a one-line window.  The boundaries of the window are the
> -character following the shell prompt and the end of the line.  Now, cycle
> -through the cursor tracking modes using keypad asterisk, until Speakup
> -says "read window."  Move through your history using your arrow keys.
> -You will notice that Speakup no longer speaks the redundant prompt.
> -
> -Some folks like to turn cursor tracking off while they are using the
> -lynx web browser.  You definitely want to turn cursor tracking off when
> -you are using the alsamixer application.  Otherwise, you won't be able
> -to hear your mixer settings while you are using the arrow keys.
> -
> -11.  Cut and Paste
> -
> -One of Speakup's more useful features is the ability to cut and paste
> -text on the screen.  This means that you can capture information from a
> -program, and paste that captured text into a different place in the
> -program, or into an entirely different program, which may even be
> -running on a different console.
> -
> -For example, in this manual, we have made references to several web
> -sites.  It would be nice if you could cut and paste these urls into your
> -web browser.  Speakup does this quite nicely.  Suppose you wanted to
> -past the following url into your browser:
> -
> -http://linux-speakup.org/
> -
> -Use the speakup review keys to position the reading cursor on the first
> -character of the above url.  When the reading cursor is in position,
> -press the keypad slash key once.  Speakup will say, "mark".  Next,
> -position the reading cursor on the rightmost character of the above
> -url. Press the keypad slash key once again to actually cut the text
> -from the screen.  Speakup will say, "cut".  Although we call this
> -cutting, Speakup does not actually delete the cut text from the screen.
> -It makes a copy of the text in a special buffer for later pasting.
> -
> -Now that you have the url cut from the screen, you can paste it into
> -your browser, or even paste the url on a command line as an argument to
> -your browser.
> -
> -Suppose you want to start lynx and go to the Speakup site.
> -
> -You can switch to a different console with the alt left and right
> -arrows, or you can switch to a specific console by typing alt and a
> -function key.  These are not Speakup commands, just standard Linux
> -console capabilities.
> -
> -Once you've changed to an appropriate console, and are at a shell prompt,
> -type the word lynx, followed by a space.  Now press and hold the speakup
> -key, while you type the keypad slash character.  The url will be pasted
> -onto the command line, just as though you had typed it in.  Press the
> -enter key to execute the command.
> -
> -The paste buffer will continue to hold the cut information, until a new
> -mark and cut operation is carried out.  This means you can paste the cut
> -information as many times as you like before doing another cut
> -operation.
> -
> -You are not limited to cutting and pasting only one line on the screen.
> -You can also cut and paste rectangular regions of the screen.  Just
> -position the reading cursor at the top left corner of the text to be
> -cut, mark it with the keypad slash key, then position the reading cursor
> -at the bottom right corner of the region to be cut, and cut it with the
> -keypad slash key.
> -
> -12.  Changing the Pronunciation of Characters
> -
> -Through the /speakup/i18n/characters sys entry, Speakup gives you the
> -ability to change how Speakup pronounces a given character.  You could,
> -for example, change how some punctuation characters are spoken.  You can
> -even change how Speakup will pronounce certain letters.
> -
> -You may, for example, wish to change how Speakup pronounces the z
> -character.  The author of Speakup, Kirk Reiser, is Canadian, and thus
> -believes that the z should be pronounced zed.  If you are an American,
> -you might wish to use the zee pronunciation instead of zed.  You can
> -change the pronunciation of both the upper and lower case z with the
> -following two commands:
> -
> -echo 90 zee >/speakup/characters
> -echo 122 zee >/speakup/characters
> -
> -Let's examine the parts of the two previous commands.  They are issued
> -at the shell prompt, and could be placed in a startup script.
> -
> -The word echo tells the shell that you want to have it display the
> -string of characters that follow the word echo.  If you were to just
> -type:
> -
> -echo hello.
> -
> -You would get the word hello printed on your screen as soon as you
> -pressed the enter key.  In this case, we are echoing strings that we
> -want to be redirected into the sys system.
> -
> -The numbers 90 and 122 in the above echo commands are the ascii numeric
> -values for the upper and lower case z, the characters we wish to change.
> -
> -The string zee is the pronunciation that we want Speakup to use for the
> -upper and lower case z.
> -
> -The > symbol redirects the output of the echo command to a file, just
> -like in DOS, or at the Windows command prompt.
> -
> -And finally, /speakup/i18n/characters is the file entry in the sys system
> -where we want the output to be directed.  Speakup looks at the numeric
> -value of the character we want to change, and inserts the pronunciation
> -string into an internal table.
> -
> -You can look at the whole table with the following command:
> -
> -cat /speakup/i18n/characters
> -
> -Speakup will then print out the entire character pronunciation table.  I
> -won't display it here, but leave you to look at it at your convenience.
> -
> -13.  Mapping Keys
> -
> -Speakup has the capability of allowing you to assign or "map" keys to
> -internal Speakup commands.  This section necessarily assumes you have a
> -Linux kernel source tree installed, and that it has been patched and
> -configured with Speakup.  How you do this is beyond the scope of this
> -manual.  For this information, visit the Speakup web site at
> -http://linux-speakup.org/.  The reason you'll need the kernel source
> -tree patched with Speakup is that the genmap utility you'll need for
> -processing keymaps is in the
> -/usr/src/linux-<version_number>/drivers/char/speakup directory.  The
> -<version_number> in the above directory path is the version number of
> -the Linux source tree you are working with.
> -
> -So ok, you've gone off and gotten your kernel source tree, and patched
> -and configured it.  Now you can start manipulating keymaps.
> -
> -You can either use the
> -/usr/src/linux-<version_number>/drivers/char/speakup/speakupmap.map file
> -included with the Speakup source, or you can cut and paste the copy in
> -section 4 into a separate file.  If you use the one in the Speakup
> -source tree, make sure you make a backup of it before you start making
> -changes.  You have been warned!
> -
> -Suppose that you want to swap the key assignments for the Speakup
> -say_last_char and the Speakup say_first_char commands.  The
> -speakupmap.map lists the key mappings for these two commands as follows:
> -
> -spk key_pageup = say_first_char
> -spk key_pagedown = say_last_char
> -
> -You can edit your copy of the speakupmap.map file and swap the command
> -names on the right side of the = (equals) sign.  You did make a backup,
> -right?  The new keymap lines would look like this:
> -
> -spk key_pageup = say_last_char
> -spk key_pagedown = say_first_char
> -
> -After you edit your copy of the speakupmap.map file, save it under a new
> -file name, perhaps newmap.map.  Then exit your editor and return to the
> -shell prompt.
> -
> -You are now ready to load your keymap with your swapped key assignments.
> - Assuming that you saved your new keymap as the file newmap.map, you
> -would load your keymap into the sys system like this:
> -
> -/usr/src/linux-<version_number>/drivers/char/speakup/genmap newmap.map
> ->/speakup/keymap
> -
> -Remember to substitute your kernel version number for the
> -<version_number> in the above command.  Also note that although the
> -above command wrapped onto two lines in this document, you should type
> -it all on one line.
> -
> -Your say first and say last characters should now be swapped.  Pressing
> -speakup pagedown should read you the first non-whitespace character on
> -the line your reading cursor is in, and pressing speakup pageup should
> -read you the last character on the line your reading cursor is in.
> -
> -You should note that these new mappings will only stay in effect until
> -you reboot, or until you load another keymap.
> -
> -One final warning.  If you try to load a partial map, you will quickly
> -find that all the mappings you didn't include in your file got deleted
> -from the working map.  Be extremely careful, and always make a backup!
> -You have been warned!
> -
> -14.  Internationalizing Speakup
> -
> -Speakup indicates various conditions to the user by speaking messages.
> -For instance, when you move to the left edge of the screen with the
> -review keys, Speakup says, "left."
> -Prior to version 3.1.0 of Speakup, all of these messages were in English,
> -and they could not be changed.  If you used a non-English synthesizer,
> -you still heard English messages, such as "left" and "cursoring on."
> -In version 3.1.0 or higher, one may load translations for the various
> -messages via the /sys filesystem.
> -
> -The directory /speakup/i18n contains several collections of messages.
> -Each group of messages is stored in its own file.
> -The following section lists all of these files, along with a brief description
> -of each.
> -
> -14.1.  Files Under the i18n Subdirectory
> -
> -* announcements:
> -This file contains various general announcements, most of which cannot
> -be categorized.  You will find messages such as "You killed Speakup",
> -"I'm alive", "leaving help", "parked", "unparked", and others.
> -You will also find the names of the screen edges and cursor tracking modes
> -here.
> -
> -* characters:
> -See section 12 for a description of this file.
> -
> -* chartab:
> -See section 12.  Unlike the rest of the files in the i18n subdirectory,
> -this one does not contain messages to be spoken.
> -
> -* colors:
> -When you use the "say attributes" function, Speakup says the name of the
> -foreground and background colors.  These names come from the i18n/colors
> -file.
> -
> -* ctl_keys:
> -Here, you will find names of control keys.  These are used with Speakup's
> -say_control feature.
> -
> -* formatted:
> -This group of messages contains embedded formatting codes, to specify
> -the type and width of displayed data.  If you change these, you must
> -preserve all of the formatting codes, and they must appear in the order
> -used by the default messages.
> -
> -* function_names:
> -Here, you will find a list of names for Speakup functions.  These are used
> -by the help system.  For example, suppose that you have activated help mode,
> -and you pressed keypad 3.  Speakup says:
> -"keypad 3 is character, say next."
> -The message "character, say next" names a Speakup function, and it
> -comes from this function_names file.
> -
> -* key_names:
> -Again, key_names is used by Speakup's help system.  In the previous
> -example, Speakup said that you pressed "keypad 3."
> -This name came from the key_names file.
> -
> -* states:
> -This file contains names for key states.
> -Again, these are part of the help system.  For instance, if you had pressed
> -speakup + keypad 3, you would hear:
> -"speakup keypad 3 is go to bottom edge."
> -The speakup key is depressed, so the name of the key state is speakup.
> -This part of the message comes from the states collection.
> -
> -14.2.  Changing language
> -
> -14.2.1. Loading Your Own Messages
> -
> -The files under the i18n subdirectory all follow the same format.
> -They consist of lines, with one message per line.
> -Each message is represented by a number, followed by the text of the message.
> -The number is the position of the message in the given collection.
> -For example, if you view the file /speakup/i18n/colors, you will see the
> -following list:
> -
> -0	black
> -1	blue
> -2	green
> -3	cyan
> -4	red
> -5	magenta
> -6	yellow
> -7	white
> -8	grey
> -
> -You can change one message, or you can change a whole group.
> -To load a whole collection of messages from a new source, simply use
> -the cp command:
> -cp ~/my_colors /speakup/i18n/colors
> -You can change an individual message with the echo command,
> -as shown in the following example.
> -
> -The Spanish name for the color blue is azul.
> -Looking at the colors file, we see that the name "blue" is at position 1
> -within the colors group.  Let's change blue to azul:
> -echo '1 azul' > /speakup/i18n/colors
> -The next time that Speakup says message 1 from the colors group, it will
> -say "azul", rather than "blue."
> -
> -14.2.2. Choose a language
> -
> -In the future, translations into various languages will be made available,
> -and most users will just load the files necessary for their language. So far,
> -only French language is available beyond native Canadian English language.
> -
> -French is only available after you are logged in.
> -
> -Canadian English is the default language. To toggle another language,
> -download the source of Speakup and untar it in your home directory. The
> -following command should let you do this:
> -
> -tar xvjf speakup-<version>.tar.bz2
> -
> -where <version> is the version number of the application.
> -
> -Next, change to the newly created directory, then into the tools/ directory, and
> -run the script speakup_setlocale. You are asked the language that you want to
> -use. Type the number associated to your language (e.g. fr for French) then press
> -Enter. Needed files are copied in the i18n directory.
> -
> -Note: the speakupconf must be installed on your system so that settings are saved.
> -Otherwise, you will have an error: your language will be loaded but you will
> -have to run the script again every time Speakup restarts.
> -See section 16.1. for information about speakupconf.
> -
> -You will have to repeat these steps for any change of locale, i.e. if you wish
> -change the speakup's language or charset (iso-8859-15 ou UTF-8).
> -
> -If you wish store the settings, note that at your next login, you will need to
> -do:
> -
> -speakup load
> -
> -Alternatively, you can add the above line to your file
> -~/.bashrc or ~/.bash_profile.
> -
> -If your system administrator ran himself the script, all the users will be able
> -to change from English to the language choosed by root and do directly
> -speakupconf load (or add this to the ~/.bashrc or
> -~/.bash_profile file). If there are several languages to handle, the
> -administrator (or every user) will have to run the first steps until speakupconf
> -save, choosing the appropriate language, in every user's home directory. Every
> -user will then be able to do speakupconf load, Speakup will load his own settings.
> -
> -14.3.  No Support for Non-Western-European Languages
> -
> -As of the current release, Speakup only supports Western European languages.
> -Support for the extended characters used by languages outside of the Western
> -European family of languages is a work in progress.
> -
> -15.  Using Speakup's Windowing Capability
> -
> -Speakup has the capability of defining and manipulating windows on the
> -screen.  Speakup uses the term "Window", to mean a user defined area of
> -the screen.  The key strokes for defining and manipulating Speakup
> -windows are as follows:
> -
> -speakup + f2 -- Set the bounds of the window.
> -Speakup + f3 -- clear the current window definition.
> -speakup + f4 -- Toggle window silence on and off.
> -speakup + keypad plus -- Say the currently defined window.
> -
> -These capabilities are useful for tracking a certain part of the screen
> -without rereading the whole screen, or for silencing a part of the
> -screen that is constantly changing, such as a clock or status line.
> -
> -There is no way to save these window settings, and you can only have one
> -window defined for each virtual console.  There is also no way to have
> -windows automatically defined for specific applications.
> -
> -In order to define a window, use the review keys to move your reading
> -cursor to the beginning of the area you want to define.  Then press
> -speakup + f2.  Speakup will tell you that the window starts at the
> -indicated row and column position.  Then move the reading cursor to the
> -end of the area to be defined as a window, and press speakup + f2 again.
> - If there is more than one line in the window, Speakup will tell you
> -that the window ends at the indicated row and column position.  If there
> -is only one line in the window, then Speakup will tell you that the
> -window is the specified line on the screen.  If you are only defining a
> -one line window, you can just press speakup + f2 twice after placing the
> -reading cursor on the line you want to define as a window.  It is not
> -necessary to position the reading cursor at the end of the line in order
> -to define the whole line as a window.
> -
> -16.  Tools for Controlling Speakup
> -
> -The speakup distribution includes extra tools (in the tools directory)
> -which were written to make speakup easier to use.  This section will
> -briefly describe the use of these tools.
> -
> -16.1.  Speakupconf
> -
> -speakupconf began life as a contribution from Steve Holmes, a member of
> -the speakup community.  We would like to thank him for his work on the
> -early versions of this project.
> -
> -This script may be installed as part of your linux distribution, but if
> -it isn't, the recommended places to put it are /usr/local/bin or
> -/usr/bin.  This script can be run by any user, so it does not require
> -root privileges.
> -
> -Speakupconf allows you to save and load your Speakup settings.  It works
> -by reading and writing the /sys files described above.
> -
> -The directory that speakupconf uses to store your settings depends on
> -whether it is run from the root account.  If you execute speakupconf as
> -root, it uses the directory /etc/speakup.  Otherwise, it uses the directory
> -~/.speakup, where ~ is your home directory.
> -Anyone who needs to use Speakup from your console can load his own custom
> -settings with this script.
> -
> -speakupconf takes one required argument: load or save.
> -Use the command
> -speakupconf save
> -to save your Speakup settings, and
> -speakupconf load
> -to load them into Speakup.
> -A second argument may be specified to use an alternate directory to
> -load or save the speakup parameters.
> -
> -16.2.  Talkwith
> -
> -Charles Hallenbeck, another member of the speakup community, wrote the
> -initial versions of this script, and we would also like to thank him for
> -his work on it.
> -
> -This script needs root privileges to run, so if it is not installed as
> -part of your linux distribution, the recommended places to install it
> -are /usr/local/sbin or /usr/sbin.
> -
> -Talkwith allows you to switch synthesizers on the fly.  It takes a synthesizer
> -name as an argument.  For instance,
> -talkwith dectlk
> -causes Speakup to use the DecTalk Express.  If you wish to switch to a
> -software synthesizer, you must also indicate which daemon you wish to
> -use.  There are two possible choices:
> -spd and espeakup.  spd is an abbreviation for speechd-up.
> -If you wish to use espeakup for software synthesis, give the command
> -talkwith soft espeakup
> -To use speechd-up, type:
> -talkwith soft spd
> -Any arguments that follow the name of the daemon are passed to the daemon
> -when it is invoked.  For instance:
> -talkwith espeakup --default-voice=fr
> -causes espeakup to use the French voice.
> -Note that talkwith must always be executed with root privileges.
> -
> -Talkwith does not attempt to load your settings after the new
> -synthesizer is activated.  You can use speakupconf to load your settings
> -if desired.
> -
> -                GNU Free Documentation License
> -                  Version 1.2, November 2002
> -
> -
> - Copyright (C) 2000,2001,2002  Free Software Foundation, Inc.
> - Everyone is permitted to copy and distribute verbatim copies
> - of this license document, but changing it is not allowed.
> -
> -
> -0. PREAMBLE
> -
> -The purpose of this License is to make a manual, textbook, or other
> -functional and useful document "free" in the sense of freedom: to
> -assure everyone the effective freedom to copy and redistribute it,
> -with or without modifying it, either commercially or noncommercially.
> -Secondarily, this License preserves for the author and publisher a way
> -to get credit for their work, while not being considered responsible
> -for modifications made by others.
> -
> -This License is a kind of "copyleft", which means that derivative
> -works of the document must themselves be free in the same sense.  It
> -complements the GNU General Public License, which is a copyleft
> -license designed for free software.
> -
> -We have designed this License in order to use it for manuals for free
> -software, because free software needs free documentation: a free
> -program should come with manuals providing the same freedoms that the
> -software does.  But this License is not limited to software manuals;
> -it can be used for any textual work, regardless of subject matter or
> -whether it is published as a printed book.  We recommend this License
> -principally for works whose purpose is instruction or reference.
> -
> -
> -1. APPLICABILITY AND DEFINITIONS
> -
> -This License applies to any manual or other work, in any medium, that
> -contains a notice placed by the copyright holder saying it can be
> -distributed under the terms of this License.  Such a notice grants a
> -world-wide, royalty-free license, unlimited in duration, to use that
> -work under the conditions stated herein.  The "Document", below,
> -refers to any such manual or work.  Any member of the public is a
> -licensee, and is addressed as "you".  You accept the license if you
> -copy, modify or distribute the work in a way requiring permission
> -under copyright law.
> -
> -A "Modified Version" of the Document means any work containing the
> -Document or a portion of it, either copied verbatim, or with
> -modifications and/or translated into another language.
> -
> -A "Secondary Section" is a named appendix or a front-matter section of
> -the Document that deals exclusively with the relationship of the
> -publishers or authors of the Document to the Document's overall subject
> -(or to related matters) and contains nothing that could fall directly
> -within that overall subject.  (Thus, if the Document is in part a
> -textbook of mathematics, a Secondary Section may not explain any
> -mathematics.)  The relationship could be a matter of historical
> -connection with the subject or with related matters, or of legal,
> -commercial, philosophical, ethical or political position regarding
> -them.
> -
> -The "Invariant Sections" are certain Secondary Sections whose titles
> -are designated, as being those of Invariant Sections, in the notice
> -that says that the Document is released under this License.  If a
> -section does not fit the above definition of Secondary then it is not
> -allowed to be designated as Invariant.  The Document may contain zero
> -Invariant Sections.  If the Document does not identify any Invariant
> -Sections then there are none.
> -
> -The "Cover Texts" are certain short passages of text that are listed,
> -as Front-Cover Texts or Back-Cover Texts, in the notice that says that
> -the Document is released under this License.  A Front-Cover Text may
> -be at most 5 words, and a Back-Cover Text may be at most 25 words.
> -
> -A "Transparent" copy of the Document means a machine-readable copy,
> -represented in a format whose specification is available to the
> -general public, that is suitable for revising the document
> -straightforwardly with generic text editors or (for images composed of
> -pixels) generic paint programs or (for drawings) some widely available
> -drawing editor, and that is suitable for input to text formatters or
> -for automatic translation to a variety of formats suitable for input
> -to text formatters.  A copy made in an otherwise Transparent file
> -format whose markup, or absence of markup, has been arranged to thwart
> -or discourage subsequent modification by readers is not Transparent.
> -An image format is not Transparent if used for any substantial amount
> -of text.  A copy that is not "Transparent" is called "Opaque".
> -
> -Examples of suitable formats for Transparent copies include plain
> -ASCII without markup, Texinfo input format, LaTeX input format, SGML
> -or XML using a publicly available DTD, and standard-conforming simple
> -HTML, PostScript or PDF designed for human modification.  Examples of
> -transparent image formats include PNG, XCF and JPG.  Opaque formats
> -include proprietary formats that can be read and edited only by
> -proprietary word processors, SGML or XML for which the DTD and/or
> -processing tools are not generally available, and the
> -machine-generated HTML, PostScript or PDF produced by some word
> -processors for output purposes only.
> -
> -The "Title Page" means, for a printed book, the title page itself,
> -plus such following pages as are needed to hold, legibly, the material
> -this License requires to appear in the title page.  For works in
> -formats which do not have any title page as such, "Title Page" means
> -the text near the most prominent appearance of the work's title,
> -preceding the beginning of the body of the text.
> -
> -A section "Entitled XYZ" means a named subunit of the Document whose
> -title either is precisely XYZ or contains XYZ in parentheses following
> -text that translates XYZ in another language.  (Here XYZ stands for a
> -specific section name mentioned below, such as "Acknowledgements",
> -"Dedications", "Endorsements", or "History".)  To "Preserve the Title"
> -of such a section when you modify the Document means that it remains a
> -section "Entitled XYZ" according to this definition.
> -
> -The Document may include Warranty Disclaimers next to the notice which
> -states that this License applies to the Document.  These Warranty
> -Disclaimers are considered to be included by reference in this
> -License, but only as regards disclaiming warranties: any other
> -implication that these Warranty Disclaimers may have is void and has
> -no effect on the meaning of this License.
> -
> -
> -2. VERBATIM COPYING
> -
> -You may copy and distribute the Document in any medium, either
> -commercially or noncommercially, provided that this License, the
> -copyright notices, and the license notice saying this License applies
> -to the Document are reproduced in all copies, and that you add no other
> -conditions whatsoever to those of this License.  You may not use
> -technical measures to obstruct or control the reading or further
> -copying of the copies you make or distribute.  However, you may accept
> -compensation in exchange for copies.  If you distribute a large enough
> -number of copies you must also follow the conditions in section 3.
> -
> -You may also lend copies, under the same conditions stated above, and
> -you may publicly display copies.
> -
> -
> -3. COPYING IN QUANTITY
> -
> -If you publish printed copies (or copies in media that commonly have
> -printed covers) of the Document, numbering more than 100, and the
> -Document's license notice requires Cover Texts, you must enclose the
> -copies in covers that carry, clearly and legibly, all these Cover
> -Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
> -the back cover.  Both covers must also clearly and legibly identify
> -you as the publisher of these copies.  The front cover must present
> -the full title with all words of the title equally prominent and
> -visible.  You may add other material on the covers in addition.
> -Copying with changes limited to the covers, as long as they preserve
> -the title of the Document and satisfy these conditions, can be treated
> -as verbatim copying in other respects.
> -
> -If the required texts for either cover are too voluminous to fit
> -legibly, you should put the first ones listed (as many as fit
> -reasonably) on the actual cover, and continue the rest onto adjacent
> -pages.
> -
> -If you publish or distribute Opaque copies of the Document numbering
> -more than 100, you must either include a machine-readable Transparent
> -copy along with each Opaque copy, or state in or with each Opaque copy
> -a computer-network location from which the general network-using
> -public has access to download using public-standard network protocols
> -a complete Transparent copy of the Document, free of added material.
> -If you use the latter option, you must take reasonably prudent steps,
> -when you begin distribution of Opaque copies in quantity, to ensure
> -that this Transparent copy will remain thus accessible at the stated
> -location until at least one year after the last time you distribute an
> -Opaque copy (directly or through your agents or retailers) of that
> -edition to the public.
> -
> -It is requested, but not required, that you contact the authors of the
> -Document well before redistributing any large number of copies, to give
> -them a chance to provide you with an updated version of the Document.
> -
> -
> -4. MODIFICATIONS
> -
> -You may copy and distribute a Modified Version of the Document under
> -the conditions of sections 2 and 3 above, provided that you release
> -the Modified Version under precisely this License, with the Modified
> -Version filling the role of the Document, thus licensing distribution
> -and modification of the Modified Version to whoever possesses a copy
> -of it.  In addition, you must do these things in the Modified Version:
> -
> -A. Use in the Title Page (and on the covers, if any) a title distinct
> -   from that of the Document, and from those of previous versions
> -   (which should, if there were any, be listed in the History section
> -   of the Document).  You may use the same title as a previous version
> -   if the original publisher of that version gives permission.
> -B. List on the Title Page, as authors, one or more persons or entities
> -   responsible for authorship of the modifications in the Modified
> -   Version, together with at least five of the principal authors of the
> -   Document (all of its principal authors, if it has fewer than five),
> -   unless they release you from this requirement.
> -C. State on the Title page the name of the publisher of the
> -   Modified Version, as the publisher.
> -D. Preserve all the copyright notices of the Document.
> -E. Add an appropriate copyright notice for your modifications
> -   adjacent to the other copyright notices.
> -F. Include, immediately after the copyright notices, a license notice
> -   giving the public permission to use the Modified Version under the
> -   terms of this License, in the form shown in the Addendum below.
> -G. Preserve in that license notice the full lists of Invariant Sections
> -   and required Cover Texts given in the Document's license notice.
> -H. Include an unaltered copy of this License.
> -I. Preserve the section Entitled "History", Preserve its Title, and add
> -   to it an item stating at least the title, year, new authors, and
> -   publisher of the Modified Version as given on the Title Page.  If
> -   there is no section Entitled "History" in the Document, create one
> -   stating the title, year, authors, and publisher of the Document as
> -   given on its Title Page, then add an item describing the Modified
> -   Version as stated in the previous sentence.
> -J. Preserve the network location, if any, given in the Document for
> -   public access to a Transparent copy of the Document, and likewise
> -   the network locations given in the Document for previous versions
> -   it was based on.  These may be placed in the "History" section.
> -   You may omit a network location for a work that was published at
> -   least four years before the Document itself, or if the original
> -   publisher of the version it refers to gives permission.
> -K. For any section Entitled "Acknowledgements" or "Dedications",
> -   Preserve the Title of the section, and preserve in the section all
> -   the substance and tone of each of the contributor acknowledgements
> -   and/or dedications given therein.
> -L. Preserve all the Invariant Sections of the Document,
> -   unaltered in their text and in their titles.  Section numbers
> -   or the equivalent are not considered part of the section titles.
> -M. Delete any section Entitled "Endorsements".  Such a section
> -   may not be included in the Modified Version.
> -N. Do not retitle any existing section to be Entitled "Endorsements"
> -   or to conflict in title with any Invariant Section.
> -O. Preserve any Warranty Disclaimers.
> -
> -If the Modified Version includes new front-matter sections or
> -appendices that qualify as Secondary Sections and contain no material
> -copied from the Document, you may at your option designate some or all
> -of these sections as invariant.  To do this, add their titles to the
> -list of Invariant Sections in the Modified Version's license notice.
> -These titles must be distinct from any other section titles.
> -
> -You may add a section Entitled "Endorsements", provided it contains
> -nothing but endorsements of your Modified Version by various
> -parties--for example, statements of peer review or that the text has
> -been approved by an organization as the authoritative definition of a
> -standard.
> -
> -You may add a passage of up to five words as a Front-Cover Text, and a
> -passage of up to 25 words as a Back-Cover Text, to the end of the list
> -of Cover Texts in the Modified Version.  Only one passage of
> -Front-Cover Text and one of Back-Cover Text may be added by (or
> -through arrangements made by) any one entity.  If the Document already
> -includes a cover text for the same cover, previously added by you or
> -by arrangement made by the same entity you are acting on behalf of,
> -you may not add another; but you may replace the old one, on explicit
> -permission from the previous publisher that added the old one.
> -
> -The author(s) and publisher(s) of the Document do not by this License
> -give permission to use their names for publicity for or to assert or
> -imply endorsement of any Modified Version.
> -
> -
> -5. COMBINING DOCUMENTS
> -
> -You may combine the Document with other documents released under this
> -License, under the terms defined in section 4 above for modified
> -versions, provided that you include in the combination all of the
> -Invariant Sections of all of the original documents, unmodified, and
> -list them all as Invariant Sections of your combined work in its
> -license notice, and that you preserve all their Warranty Disclaimers.
> -
> -The combined work need only contain one copy of this License, and
> -multiple identical Invariant Sections may be replaced with a single
> -copy.  If there are multiple Invariant Sections with the same name but
> -different contents, make the title of each such section unique by
> -adding at the end of it, in parentheses, the name of the original
> -author or publisher of that section if known, or else a unique number.
> -Make the same adjustment to the section titles in the list of
> -Invariant Sections in the license notice of the combined work.
> -
> -In the combination, you must combine any sections Entitled "History"
> -in the various original documents, forming one section Entitled
> -"History"; likewise combine any sections Entitled "Acknowledgements",
> -and any sections Entitled "Dedications".  You must delete all sections
> -Entitled "Endorsements".
> -
> -
> -6. COLLECTIONS OF DOCUMENTS
> -
> -You may make a collection consisting of the Document and other documents
> -released under this License, and replace the individual copies of this
> -License in the various documents with a single copy that is included in
> -the collection, provided that you follow the rules of this License for
> -verbatim copying of each of the documents in all other respects.
> -
> -You may extract a single document from such a collection, and distribute
> -it individually under this License, provided you insert a copy of this
> -License into the extracted document, and follow this License in all
> -other respects regarding verbatim copying of that document.
> -
> -
> -7. AGGREGATION WITH INDEPENDENT WORKS
> -
> -A compilation of the Document or its derivatives with other separate
> -and independent documents or works, in or on a volume of a storage or
> -distribution medium, is called an "aggregate" if the copyright
> -resulting from the compilation is not used to limit the legal rights
> -of the compilation's users beyond what the individual works permit.
> -When the Document is included in an aggregate, this License does not
> -apply to the other works in the aggregate which are not themselves
> -derivative works of the Document.
> -
> -If the Cover Text requirement of section 3 is applicable to these
> -copies of the Document, then if the Document is less than one half of
> -the entire aggregate, the Document's Cover Texts may be placed on
> -covers that bracket the Document within the aggregate, or the
> -electronic equivalent of covers if the Document is in electronic form.
> -Otherwise they must appear on printed covers that bracket the whole
> -aggregate.
> -
> -
> -8. TRANSLATION
> -
> -Translation is considered a kind of modification, so you may
> -distribute translations of the Document under the terms of section 4.
> -Replacing Invariant Sections with translations requires special
> -permission from their copyright holders, but you may include
> -translations of some or all Invariant Sections in addition to the
> -original versions of these Invariant Sections.  You may include a
> -translation of this License, and all the license notices in the
> -Document, and any Warranty Disclaimers, provided that you also include
> -the original English version of this License and the original versions
> -of those notices and disclaimers.  In case of a disagreement between
> -the translation and the original version of this License or a notice
> -or disclaimer, the original version will prevail.
> -
> -If a section in the Document is Entitled "Acknowledgements",
> -"Dedications", or "History", the requirement (section 4) to Preserve
> -its Title (section 1) will typically require changing the actual
> -title.
> -
> -
> -9. TERMINATION
> -
> -You may not copy, modify, sublicense, or distribute the Document except
> -as expressly provided for under this License.  Any other attempt to
> -copy, modify, sublicense or distribute the Document is void, and will
> -automatically terminate your rights under this License.  However,
> -parties who have received copies, or rights, from you under this
> -License will not have their licenses terminated so long as such
> -parties remain in full compliance.
> -
> -
> -10. FUTURE REVISIONS OF THIS LICENSE
> -
> -The Free Software Foundation may publish new, revised versions
> -of the GNU Free Documentation License from time to time.  Such new
> -versions will be similar in spirit to the present version, but may
> -differ in detail to address new problems or concerns.  See
> -https://www.gnu.org/copyleft/.
> -
> -Each version of the License is given a distinguishing version number.
> -If the Document specifies that a particular numbered version of this
> -License "or any later version" applies to it, you have the option of
> -following the terms and conditions either of that specified version or
> -of any later version that has been published (not as a draft) by the
> -Free Software Foundation.  If the Document does not specify a version
> -number of this License, you may choose any version ever published (not
> -as a draft) by the Free Software Foundation.
> -
> -
> -ADDENDUM: How to use this License for your documents
> -
> -To use this License in a document you have written, include a copy of
> -the License in the document and put the following copyright and
> -license notices just after the title page:
> -
> -    Copyright (c)  YEAR  YOUR NAME.
> -    Permission is granted to copy, distribute and/or modify this document
> -    under the terms of the GNU Free Documentation License, Version 1.2
> -    or any later version published by the Free Software Foundation;
> -    with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
> -    A copy of the license is included in the section entitled "GNU
> -    Free Documentation License".
> -
> -If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
> -replace the "with...Texts." line with this:
> -
> -    with the Invariant Sections being LIST THEIR TITLES, with the
> -    Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
> -
> -If you have Invariant Sections without Cover Texts, or some other
> -combination of the three, merge those two alternatives to suit the
> -situation.
> -
> -If your document contains nontrivial examples of program code, we
> -recommend releasing these examples in parallel under your choice of
> -free software license, such as the GNU General Public License,
> -to permit their use in free software.
> -
> -The End.
>