All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
To: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>,
	Vinod Koul <vkoul@kernel.org>,
	Dan Williams <dan.j.williams@intel.com>
Cc: dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 06/15] dmaengine: dw-edma: Add device_prep_interleave_dma() support
Date: Tue, 15 Dec 2020 18:30:15 +0100	[thread overview]
Message-ID: <9626b4344cc67dc22172935222ad8c466e53edf8.1608053262.git.gustavo.pimentel@synopsys.com> (raw)
In-Reply-To: <cover.1608053262.git.gustavo.pimentel@synopsys.com>
In-Reply-To: <cover.1608053262.git.gustavo.pimentel@synopsys.com>

Add device_prep_interleave_dma() support to Synopsys DMA driver.

This feature implements a similar data transfer mechanism to the
scatter-gather implementation.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 drivers/dma/dw-edma/dw-edma-core.c | 85 ++++++++++++++++++++++++++++++--------
 drivers/dma/dw-edma/dw-edma-core.h | 13 ++++--
 2 files changed, 78 insertions(+), 20 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index b65c32e1..0fe3835 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -329,7 +329,7 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
 	struct dw_edma_chunk *chunk;
 	struct dw_edma_burst *burst;
 	struct dw_edma_desc *desc;
-	u32 cnt;
+	u32 cnt = 0;
 	int i;
 
 	if (!chan->configured)
@@ -352,12 +352,19 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
 		return NULL;
 	}
 
-	if (xfer->cyclic) {
+	if (xfer->type == EDMA_XFER_CYCLIC) {
 		if (!xfer->xfer.cyclic.len || !xfer->xfer.cyclic.cnt)
 			return NULL;
-	} else {
+	} else if (xfer->type == EDMA_XFER_SCATTER_GATHER) {
 		if (xfer->xfer.sg.len < 1)
 			return NULL;
+	} else if (xfer->type == EDMA_XFER_INTERLEAVED) {
+		if (!xfer->xfer.il->numf)
+			return NULL;
+		if (xfer->xfer.il->numf > 0 && xfer->xfer.il->frame_size > 0)
+			return NULL;
+	} else {
+		return NULL;
 	}
 
 	desc = dw_edma_alloc_desc(chan);
@@ -368,18 +375,28 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
 	if (unlikely(!chunk))
 		goto err_alloc;
 
-	src_addr = chan->config.src_addr;
-	dst_addr = chan->config.dst_addr;
+	if (xfer->type == EDMA_XFER_INTERLEAVED) {
+		src_addr = xfer->xfer.il->src_start;
+		dst_addr = xfer->xfer.il->dst_start;
+	} else {
+		src_addr = chan->config.src_addr;
+		dst_addr = chan->config.dst_addr;
+	}
 
-	if (xfer->cyclic) {
+	if (xfer->type == EDMA_XFER_CYCLIC) {
 		cnt = xfer->xfer.cyclic.cnt;
-	} else {
+	} else if (xfer->type == EDMA_XFER_SCATTER_GATHER) {
 		cnt = xfer->xfer.sg.len;
 		sg = xfer->xfer.sg.sgl;
+	} else if (xfer->type == EDMA_XFER_INTERLEAVED) {
+		if (xfer->xfer.il->numf > 0)
+			cnt = xfer->xfer.il->numf;
+		else
+			cnt = xfer->xfer.il->frame_size;
 	}
 
 	for (i = 0; i < cnt; i++) {
-		if (!xfer->cyclic && !sg)
+		if (xfer->type == EDMA_XFER_SCATTER_GATHER && !sg)
 			break;
 
 		if (chunk->bursts_alloc == chan->ll_max) {
@@ -392,19 +409,21 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
 		if (unlikely(!burst))
 			goto err_alloc;
 
-		if (xfer->cyclic)
+		if (xfer->type == EDMA_XFER_CYCLIC)
 			burst->sz = xfer->xfer.cyclic.len;
-		else
+		else if (xfer->type == EDMA_XFER_SCATTER_GATHER)
 			burst->sz = sg_dma_len(sg);
+		else if (xfer->type == EDMA_XFER_INTERLEAVED)
+			burst->sz = xfer->xfer.il->sgl[i].size;
 
 		chunk->ll_region.sz += burst->sz;
 		desc->alloc_sz += burst->sz;
 
 		if (chan->dir == EDMA_DIR_WRITE) {
 			burst->sar = src_addr;
-			if (xfer->cyclic) {
+			if (xfer->type == EDMA_XFER_CYCLIC) {
 				burst->dar = xfer->xfer.cyclic.paddr;
-			} else {
+			} else if (xfer->type == EDMA_XFER_SCATTER_GATHER) {
 				burst->dar = dst_addr;
 				/* Unlike the typical assumption by other
 				 * drivers/IPs the peripheral memory isn't
@@ -416,9 +435,9 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
 			}
 		} else {
 			burst->dar = dst_addr;
-			if (xfer->cyclic) {
+			if (xfer->type == EDMA_XFER_CYCLIC) {
 				burst->sar = xfer->xfer.cyclic.paddr;
-			} else {
+			} else if (xfer->type == EDMA_XFER_SCATTER_GATHER) {
 				burst->sar = src_addr;
 				/* Unlike the typical assumption by other
 				 * drivers/IPs the peripheral memory isn't
@@ -430,10 +449,24 @@ dw_edma_device_transfer(struct dw_edma_transfer *xfer)
 			}
 		}
 
-		if (!xfer->cyclic) {
+		if (xfer->type == EDMA_XFER_SCATTER_GATHER) {
 			src_addr += sg_dma_len(sg);
 			dst_addr += sg_dma_len(sg);
 			sg = sg_next(sg);
+		} else if (xfer->type == EDMA_XFER_INTERLEAVED &&
+			   xfer->xfer.il->frame_size > 0) {
+			struct dma_interleaved_template *il = xfer->xfer.il;
+			struct data_chunk *dc = &il->sgl[i];
+
+			if (il->src_sgl) {
+				src_addr += burst->sz;
+				src_addr += dmaengine_get_src_icg(il, dc);
+			}
+
+			if (il->dst_sgl) {
+				dst_addr += burst->sz;
+				dst_addr += dmaengine_get_dst_icg(il, dc);
+			}
 		}
 	}
 
@@ -459,7 +492,7 @@ dw_edma_device_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 	xfer.xfer.sg.sgl = sgl;
 	xfer.xfer.sg.len = len;
 	xfer.flags = flags;
-	xfer.cyclic = false;
+	xfer.type = EDMA_XFER_SCATTER_GATHER;
 
 	return dw_edma_device_transfer(&xfer);
 }
@@ -478,7 +511,23 @@ dw_edma_device_prep_dma_cyclic(struct dma_chan *dchan, dma_addr_t paddr,
 	xfer.xfer.cyclic.len = len;
 	xfer.xfer.cyclic.cnt = count;
 	xfer.flags = flags;
-	xfer.cyclic = true;
+	xfer.type = EDMA_XFER_CYCLIC;
+
+	return dw_edma_device_transfer(&xfer);
+}
+
+static struct dma_async_tx_descriptor *
+dw_edma_device_prep_interleaved_dma(struct dma_chan *dchan,
+				    struct dma_interleaved_template *ilt,
+				    unsigned long flags)
+{
+	struct dw_edma_transfer xfer;
+
+	xfer.dchan = dchan;
+	xfer.direction = ilt->dir;
+	xfer.xfer.il = ilt;
+	xfer.flags = flags;
+	xfer.type = EDMA_XFER_INTERLEAVED;
 
 	return dw_edma_device_transfer(&xfer);
 }
@@ -738,6 +787,7 @@ static int dw_edma_channel_setup(struct dw_edma_chip *chip, bool write,
 	dma_cap_set(DMA_SLAVE, dma->cap_mask);
 	dma_cap_set(DMA_CYCLIC, dma->cap_mask);
 	dma_cap_set(DMA_PRIVATE, dma->cap_mask);
+	dma_cap_set(DMA_INTERLEAVE, dma->cap_mask);
 	dma->directions = BIT(write ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV);
 	dma->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	dma->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
@@ -756,6 +806,7 @@ static int dw_edma_channel_setup(struct dw_edma_chip *chip, bool write,
 	dma->device_tx_status = dw_edma_device_tx_status;
 	dma->device_prep_slave_sg = dw_edma_device_prep_slave_sg;
 	dma->device_prep_dma_cyclic = dw_edma_device_prep_dma_cyclic;
+	dma->device_prep_interleaved_dma = dw_edma_device_prep_interleaved_dma;
 
 	dma_set_max_seg_size(dma->dev, U32_MAX);
 
diff --git a/drivers/dma/dw-edma/dw-edma-core.h b/drivers/dma/dw-edma/dw-edma-core.h
index 3f9593e..f72ebaa 100644
--- a/drivers/dma/dw-edma/dw-edma-core.h
+++ b/drivers/dma/dw-edma/dw-edma-core.h
@@ -39,6 +39,12 @@ enum dw_edma_status {
 	EDMA_ST_BUSY
 };
 
+enum dw_edma_xfer_type {
+	EDMA_XFER_SCATTER_GATHER = 0,
+	EDMA_XFER_CYCLIC,
+	EDMA_XFER_INTERLEAVED
+};
+
 struct dw_edma_chan;
 struct dw_edma_chunk;
 
@@ -146,12 +152,13 @@ struct dw_edma_cyclic {
 struct dw_edma_transfer {
 	struct dma_chan			*dchan;
 	union dw_edma_xfer {
-		struct dw_edma_sg	sg;
-		struct dw_edma_cyclic	cyclic;
+		struct dw_edma_sg		sg;
+		struct dw_edma_cyclic		cyclic;
+		struct dma_interleaved_template *il;
 	} xfer;
 	enum dma_transfer_direction	direction;
 	unsigned long			flags;
-	bool				cyclic;
+	enum dw_edma_xfer_type		type;
 };
 
 static inline
-- 
2.7.4


  parent reply	other threads:[~2020-12-15 17:40 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-15 17:30 [PATCH 00/15] dmaengine: dw-edma: HDMA support Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 01/15] dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 02/15] dmaengine: dw-edma: Fix comments offset characters' alignment Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 03/15] dmaengine: dw-edma: Add support for the HDMA feature Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 04/15] PCI: Add pci_find_vsec_capability() to find a specific VSEC Gustavo Pimentel
2021-02-01 22:39   ` Bjorn Helgaas
2021-02-01 23:24     ` Dan Williams
2021-02-01 23:29       ` Ben Widawsky
2021-02-02 12:25     ` Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 05/15] dmaengine: dw-edma: Add PCIe VSEC data retrieval support Gustavo Pimentel
2020-12-15 17:30 ` Gustavo Pimentel [this message]
2020-12-15 17:30 ` [PATCH 07/15] dmaengine: dw-edma: Improve number of channels check Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 08/15] dmaengine: dw-edma: Reorder variables to keep consistency Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 09/15] dmaengine: dw-edma: Improve the linked list and data blocks definition Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 10/15] dmaengine: dw-edma: Change linked list and data blocks offset and sizes Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 11/15] dmaengine: dw-edma: Move struct dentry variable from static definition into dw_edma struct Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 12/15] dmaengine: dw-edma: Fix crash on loading/unloading driver Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 13/15] dmaengine: dw-edma: Change DMA abreviation from lower into upper case Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 14/15] dmaengine: dw-edma: Revert fix scatter-gather address calculation Gustavo Pimentel
2020-12-15 17:30 ` [PATCH 15/15] dmaengine: dw-edma: Add pcim_iomap_table return checker Gustavo Pimentel
2021-02-01  7:16 ` [PATCH 00/15] dmaengine: dw-edma: HDMA support Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9626b4344cc67dc22172935222ad8c466e53edf8.1608053262.git.gustavo.pimentel@synopsys.com \
    --to=gustavo.pimentel@synopsys.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.