Hi Olliver,

I try to build Armbian with kernel 4.5.0-rc6 by adding the patch as 
discussed here 
<https://groups.google.com/d/msg/linux-sunxi/vSC4vx8_ok8/K0jW8bmcAQAJ>.
In addition I have to add following as well:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 95c1923..9d6cfa8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -695,6 +696,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
     sun7i-a20-olimex-som-evb.dtb \
     sun7i-a20-olinuxino-lime.dtb \
     sun7i-a20-olinuxino-lime2.dtb \
+    sun7i-a20-olinuxino-lime2-emmc.dtb \
     sun7i-a20-olinuxino-micro.dtb \
     sun7i-a20-orangepi.dtb \
     sun7i-a20-orangepi-mini.dtb \
to be able to compile the new sun7i-a20-olinuxino-lime2-emmc.dts file.

After booting I have renamed it to sun7i-a20-olinuxino-lime2.dts and reboot 
lime-eMMC board.

Unfortunately, I get some error messages:
root@lime2:~# dmesg | grep mmc
[    0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 
rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 
sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve 
sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=
1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1
[    3.721024] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    3.758926] sunxi-mmc 1c0f000.mmc: base:0xf08dc000 irq:26
[    3.759832] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq
[    4.528643] sunxi-mmc 1c11000.mmc: fatal err update clk timeout
[    4.535700] mmc0: host does not support reading read-only switch, 
assuming write-enable
[    4.538253] mmc0: new high speed SDHC card at address 0002
[    4.539066] mmcblk0: mmc0:0002 00000 3.70 GiB
[    4.540959]  mmcblk0: p1
[    4.548773] sunxi-mmc 1c11000.mmc: base:0xf08f2000 irq:27
[    6.418686] sunxi-mmc 1c11000.mmc: fatal err update clk timeout
[    6.600359] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data 
mode. Opts: (null)
[    7.168650] sunxi-mmc 1c11000.mmc: fatal err update clk timeout
[    7.918646] sunxi-mmc 1c11000.mmc: fatal err update clk timeout
[    9.875182] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=
remount-ro

Where could be the problem?

Best regards
Chris

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.